Installation
============
This guides includes two type of installation
* File System as Image Storage + Level 2 Network without IPAM and Routing
* CEPH as Image Storage + Level 2 Network with automatic IPAM and Routing
(using Router Advertisement + Netbox)
The guide will explicitly mention a section/subsection if it is exclusive to any
one of the above mentioned scenario.
.. note::
The instructions assumes the following things
* User is **root**.
* Base Directory is :file:`/root/`.
Alpine
------
.. note::
Python Wheel (Binary) Packages does not support Alpine Linux as it is
using musl libc instead of glibc. Therefore, expect longer installation
times than other linux distributions.
Enable Edge Repos, Update and Upgrade
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. warning::
The below commands would overwrite your repositories sources and
upgrade all packages and their dependencies to match those available
in edge repos. **So, be warned**
.. code-block:: sh
:linenos:
cat > /etc/apk/repositories << EOF
http://dl-cdn.alpinelinux.org/alpine/edge/main
http://dl-cdn.alpinelinux.org/alpine/edge/community
http://dl-cdn.alpinelinux.org/alpine/edge/testing
EOF
apk update
apk upgrade
reboot
Install Dependencies
~~~~~~~~~~~~~~~~~~~~
.. note::
The installation and configuration of a production grade etcd cluster
is out of scope of this manual. So, we will install etcd with default
configuration.
.. code-block:: sh
:linenos:
apk add git python3 alpine-sdk python3-dev etcd etcd-ctl openntpd \
libffi-dev openssl-dev make py3-protobuf py3-tempita chrony
pip3 install pipenv
**Install QEMU (For Filesystem based Installation)**
.. code-block:: sh
apk add qemu qemu-system-x86_64 qemu-img
**Install QEMU/CEPH/radvd (For CEPH based Installation)**
.. code-block:: sh
$(git clone https://code.ungleich.ch/ahmedbilal/qemu-with-rbd-alpine.git && cd qemu-with-rbd-alpine && apk add apks/*.apk --allow-untrusted)
apk add ceph radvd
Syncronize Date/Time
~~~~~~~~~~~~~~~~~~~~
.. code-block:: sh
:linenos:
service chronyd start
rc-update add chronyd
Start etcd and enable it
~~~~~~~~~~~~~~~~~~~~~~~~
.. note::
The following :command:`curl` statement shouldn't be run once
etcd is fixed in alpine repos.
.. code-block:: sh
:linenos:
curl https://raw.githubusercontent.com/etcd-io/etcd/release-3.4/etcd.conf.yml.sample -o /etc/etcd/conf.yml
service etcd start
rc-update add etcd
Install uotp
~~~~~~~~~~~~
.. code-block:: sh
:linenos:
git clone https://code.ungleich.ch/ungleich-public/uotp.git
cd uotp
mv .env.sample .env
pipenv --three --site-packages
pipenv install
pipenv run python app.py
Run :code:`$(cd scripts && pipenv run python get-admin.py)` to get
admin seed. A sample output
.. code-block:: json
{
"seed": "FYTVQ72A2CJJ4TB4",
"realm": ["ungleich-admin"]
}
Now, run :code:`pipenv run python scripts/create-auth.py FYTVQ72A2CJJ4TB4`
(Replace **FYTVQ72A2CJJ4TB4** with your admin seed obtained in previous step).
A sample output is as below. It shows seed of auth.
.. code-block:: json
{
"message": "Account Created",
"name": "auth",
"realm": ["ungleich-auth"],
"seed": "XZLTUMX26TRAZOXC"
}
.. note::
Please note both **admin** and **auth** seeds as we would need them in setting up ucloud.
Install and configure ucloud
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. code-block:: sh
:linenos:
git clone https://code.ungleich.ch/ucloud/ucloud.git
cd ucloud
pipenv --three --site-packages
pipenv install
**Filesystem based Installation**
You just need to update **AUTH_SEED** in the below code to match your auth's seed.
.. code-block:: sh
:linenos:
mkdir /etc/ucloud
cat > /etc/ucloud/ucloud.conf << EOF
AUTH_NAME=auth
AUTH_SEED=XZLTUMX26TRAZOXC
AUTH_REALM=ungleich-auth
REALM_ALLOWED = ["ungleich-admin", "ungleich-user"]
OTP_SERVER="http://127.0.0.1:8000/"
ETCD_URL=localhost
STORAGE_BACKEND=filesystem
BASE_DIR=/var/www
IMAGE_DIR=/var/image
VM_DIR=/var/vm
VM_PREFIX=/v1/vm/
HOST_PREFIX=/v1/host/
REQUEST_PREFIX=/v1/request/
FILE_PREFIX=/v1/file/
IMAGE_PREFIX=/v1/image/
IMAGE_STORE_PREFIX=/v1/image_store/
USER_PREFIX=/v1/user/
NETWORK_PREFIX=/v1/network/
ssh_username=meow
ssh_pkey="~/.ssh/id_rsa"
VXLAN_PHY_DEV="eth0"
EOF
**CEPH based Installation**
You need to update the following
* **AUTH_SEED**
* **NETBOX_URL**
* **NETBOX_TOKEN**
* **PREFIX**
* **PREFIX_LENGTH**
.. code-block:: sh
:linenos:
mkdir /etc/ucloud
cat > /etc/ucloud/ucloud.conf << EOF
AUTH_NAME=auth
AUTH_SEED=XZLTUMX26TRAZOXC
AUTH_REALM=ungleich-auth
REALM_ALLOWED = ["ungleich-admin", "ungleich-user"]
OTP_SERVER="http://127.0.0.1:8000/"
ETCD_URL=localhost
STORAGE_BACKEND=ceph
BASE_DIR=/var/www
IMAGE_DIR=/var/image
VM_DIR=/var/vm
VM_PREFIX=/v1/vm/
HOST_PREFIX=/v1/host/
REQUEST_PREFIX=/v1/request/
FILE_PREFIX=/v1/file/
IMAGE_PREFIX=/v1/image/
IMAGE_STORE_PREFIX=/v1/image_store/
USER_PREFIX=/v1/user/
NETWORK_PREFIX=/v1/network/
ssh_username=meow
ssh_pkey="~/.ssh/id_rsa"
VXLAN_PHY_DEV="eth0"
NETBOX_URL="<url-for-your-netbox-installation>"
NETBOX_TOKEN="netbox-token"
PREFIX="your-prefix"
PREFIX_LENGTH="64"
EOF
Install and configure ucloud-cli
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. code-block:: sh
:linenos:
git clone https://code.ungleich.ch/ucloud/ucloud-cli.git
cd ucloud-cli
pipenv --three --site-packages
pipenv install
cat > ~/.ucloud.conf << EOF
UCLOUD_API_SERVER=http://localhost:5000
EOF
mkdir /var/www/
**Only for Filesystem Based Installation**
.. code-block:: sh
mkdir /var/image/
mkdir /var/vm/
Environment Variables and aliases
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To ease usage of ucloud and its various components put the following in
your shell profile e.g *~/.profile*
.. code-block:: sh
export OTP_NAME=admin
export OTP_REALM=ungleich-admin
export OTP_SEED=FYTVQ72A2CJJ4TB4
alias ucloud='cd /root/ucloud/ && pipenv run python ucloud.py'
alias ucloud-cli='cd /root/ucloud-cli/ && pipenv run python ucloud-cli.py'
alias uotp='cd /root/uotp/ && pipenv run python app.py'
and run :code:`source ~/.profile`