From 4c53bac58950587c1b4ed7652a153346095b29c9 Mon Sep 17 00:00:00 2001
From: Nico Schottelius <nico@nico-notebook.schottelius.org>
Date: Thu, 8 Oct 2020 21:01:49 +0200
Subject: [PATCH] [blog] alpine linux encrypted rootfs

---
 .../contents.lr                               | 171 ++++++++++++++++++
 1 file changed, 171 insertions(+)
 create mode 100644 content/u/blog/encrypted-rootfs-with-alpine-linux/contents.lr

diff --git a/content/u/blog/encrypted-rootfs-with-alpine-linux/contents.lr b/content/u/blog/encrypted-rootfs-with-alpine-linux/contents.lr
new file mode 100644
index 0000000..af93b03
--- /dev/null
+++ b/content/u/blog/encrypted-rootfs-with-alpine-linux/contents.lr
@@ -0,0 +1,171 @@
+title: Encrypted rootfs with Alpine Linux
+---
+pub_date: 2020-10-08
+---
+author: ungleich
+---
+twitter_handle: ungleich
+---
+_hidden: no
+---
+_discoverable: yes!
+---
+abstract:
+How to encrypt your root filesystem with Alpine Linux
+---
+body:
+
+## Introduction
+
+This is a short guide on how to encrypt your root filesystem on Alpine
+Linux. This article assumes an EFI based system.
+
+## Booting Alpine Linux
+
+Use the standard Alpine Linux installer to boot. Prepare networking
+and and apkrepos:
+
+```
+setup-interfaces
+```
+
+If you are in an IPv6 only network, setup a nameserver. At the moment
+Alpine Linux does not start rdnssd by default. The following works for
+VMs on [Data Center Light](https://datacenterlight.ch)
+
+```
+echo nameserver 2a0a:e5c0:2:a::a
+```
+
+Then setup the repos:
+
+```
+setup-apkrepos
+```
+
+Optional, if you want to continue the installation remotely from
+another computer via ssh:
+
+```
+setup-sshd
+```
+
+And then add your ssh key to /root/.ssh/authorized keys. We are using
+the key.wf service for staff at ungleich:
+
+```
+mkdir -p /root/.ssh/
+wget -O ~/.ssh/authorized_keys  key.wf/nico
+```
+
+## Create partitions
+
+In this guide we assume you create 3 partitions, based on gpt:
+
+* /boot: a vfat partition usable for EFI boot (usually ~500MB)
+* swap: the swap partition (usually ~half RAM)
+* root: the partition containing the root filesystem
+
+In the the following sections we assume your disk is **/dev/sda**. If you
+are using NVMe, your disk might also be **/dev/nvme0n1** or similar.
+
+```
+apk add gptfdisk
+gdisk /dev/sda
+# create new partition table if it does not exist or you want to start clean
+# create the partitions
+```
+
+## Format partitions
+
+```
+mkfs.vfat /dev/sda1
+apk add cryptsetup
+
+# Enter YES and your password twice
+cryptsetup luksFormat /dev/sda3
+
+# Create DM device
+cryptsetup luksOpen /dev/sda3 rootfs
+
+# Create filesystem
+apk add e2fsprogs
+mkfs.ext4 /dev/mapper/rootfs
+
+# Mount filesytems
+mount /dev/mapper/rootfs /mnt
+mkdir /mnt/boot
+mount /dev/sda1 /mnt/boot
+
+```
+
+## Configure initramfs
+
+We need to enable rootfs decryption on boot. For this we need to add
+cryptsetup into the feature list of /etc/mkinitfs/mkinitfs.conf:
+
+```
+hike:/etc# cat /etc/mkinitfs/mkinitfs.conf
+features="ata base ide scsi usb virtio ext4 cryptsetup"
+```
+
+Regenerate the initramfs:
+
+```
+mkinitfs
+```
+
+## Configure and install the bootloader
+
+We will be using grub for booting:
+
+```
+apk add grub-efi efibootmgr
+```
+
+Update the /etc/default/grub to contain the cryptroot kernel
+parameter in the GRUB_CMDLINE_LINUX_DEFAULT variable:
+
+```
+hike:/# cat /etc/default/grub
+GRUB_DISTRIBUTOR="Alpine"
+GRUB_TIMEOUT=2
+GRUB_DISABLE_SUBMENU=y
+GRUB_DISABLE_RECOVERY=true
+GRUB_CMDLINE_LINUX_DEFAULT="cryptroot=/dev/sda3 cryptdm=root"
+```
+
+Regenerate the grub configuration:
+
+```
+grub-mkconfig -o /mnt/boot/grub/grub.cfg
+```
+
+Verify it has been added correctly:
+
+```
+hike:/# grep crypt /boot/grub/grub.cfg
+        linux   /vmlinuz-lts root=UUID=fa67b307-e155-47d8-98a6-4930131b5cd3 ro  modules=sd-mod,usb-storage,ext4 nomodeset quiet rootfstype=ext4 cryptroot=/dev/sda3 cryptdm=root
+```
+
+Install grub:
+
+```
+grub-install --efi-directory /mnt/boot
+```
+
+## Install to disk
+
+All changes so far have been done in RAM. Let's persist them:
+
+```
+setup-disk /mnt
+```
+
+## Final step
+
+If everything went well so far - it's time to reboot your fully
+encrypted system. The usual steps like setting up the root password or
+the hostname have been skipped for the sake brevity.
+
+Enjoy your full encrypted Alpine Linux!