bin/build-helper

@@ -370,7 +370,7 @@ eof
         cat << eof
 Manual steps post release:
     - cdist-web
-    - send generated mailinglist.tmp mail
+    - send mail body generated in mailinglist.tmp and inform Dmitry for deb
     - twitter
 eof
     ;;

cdist/conf/explorer/disks

@@ -1,67 +1,27 @@
-#!/bin/sh -e
+#!/bin/sh
-#
-# based on previous work by other people, modified by:
-# 2020 Dennis Camera <dennis.camera at ssrq-sds-fds.ch>
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Finds disks of the system (excl. ram disks, floppy, cdrom)
 
 uname_s="$(uname -s)"
 
-case $uname_s in
+case "${uname_s}" in
     FreeBSD)
         sysctl -n kern.disks
     ;;
-    OpenBSD)
+    OpenBSD|NetBSD)
-        sysctl -n hw.disknames | grep -Eo '[lsw]d[0-9]+'
+        sysctl -n hw.disknames | grep -Eo '[lsw]d[0-9]+' | xargs
-    ;;
-    NetBSD)
-        PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
-        sysctl -n hw.disknames \
-        | awk 'BEGIN { RS = " " } /^[lsw]d[0-9]+/'
     ;;
     Linux)
-        # list of major device numbers toexclude:
+        if command -v lsblk > /dev/null
-        #  ram disks, floppies, cdroms
+        then
+            # exclude ram disks, floppies and cdroms
             # https://www.kernel.org/doc/Documentation/admin-guide/devices.txt
-        ign_majors='1 2 11'
+            lsblk -e 1,2,11 -dno name | xargs
-
-        if command -v lsblk >/dev/null 2>&1
-        then
-            lsblk -e "$(echo "$ign_majors" | tr ' ' ',')" -dno name
-        elif test -d /sys/block/
-        then
-            # shellcheck disable=SC2012
-            ls -1 /sys/block/ \
-            | awk -v ign_majors="$(echo "$ign_majors" | tr ' ' '|')" '
-                {
-                  devfile = "/sys/block/" $0 "/dev"
-                  getline devno < devfile
-                  close(devfile)
-                  if (devno !~ "^(" ign_majors "):") print
-                }'
         else
-            echo "Don't know how to list disks on Linux without lsblk and sysfs." >&2
+            printf "Don't know how to list disks for %s operating system without lsblk, if you can please submit a patch\n" "${uname_s}" >&2
-            echo 'If you can, please submit a patch.'>&2
         fi
     ;;
     *)
-        printf "Don't know how to list disks for %s operating system.\n" "${uname_s}" >&2
+        printf "Don't know how to list disks for %s operating system, if you can please submit a patch\n" "${uname_s}" >&2
-        printf 'If you can please submit a patch\n' >&2
     ;;
-esac \
+esac
-| xargs
+
+exit 0

cdist/conf/explorer/init

@@ -1,8 +1,7 @@
-#!/bin/sh -e
+#!/bin/sh
 #
 # 2016 Daniel Heule (hda at sfs.biz)
 # Copyright 2017, Philippe Gregoire <pg@pgregoire.xyz>
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -20,422 +19,21 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 #
-# Returns the name of the init system (PID 1)
+# Returns the process name of pid 1 ( normaly the init system )
-
+# for example at linux this value is "init" or "systemd" in most cases
-# Expected values:
-# Linux:
-#  Adélie Linux:
-#    sysvinit+openrc
-#  Alpine Linux:
-#    busybox-init+openrc
-#  ArchLinux:
-#    systemd, sysvinit
-#  CRUX:
-#    sysvinit
-#  Debian:
-#    systemd, upstart, sysvinit, openrc, ???
-#  Devuan:
-#    sysvinit, sysvinit+openrc
-#  Gentoo:
-#    sysvinit+openrc, openrc-init, systemd
-#  OpenBMC:
-#    systemd
-#  OpenWrt:
-#    procd, init???
-#  RedHat (RHEL, CentOS, Fedora, RedHat Linux, ...):
-#    systemd, upstart, upstart-legacy, sysvinit
-#  Slackware:
-#    sysvinit
-#  SuSE:
-#    systemd, sysvinit
-#  Ubuntu:
-#    systemd, upstart, upstart-legacy, sysvinit
-#  VoidLinux:
-#    runit
 #
-# GNU:
-#   Debian:
-#     sysvinit, hurd-init
-#
-# BSD:
-#  {Free,Open,Net}BSD:
-#    init
-#
-# Mac OS X:
-#   launchd, init+SystemStarter
-#
-# Solaris/Illumos:
-#   smf, init???
 
-# NOTE: init systems can be stacked. This is popular to run OpenRC on top of
+uname_s="$(uname -s)"
-# sysvinit (Gentoo) or busybox-init (Alpine), but can also be used to run runit
-# as a systemd service.  This makes init system detection very complicated
-# (which result is expected?)  This script tries to untangle some combinations,
-# OpenRC on top of sysv or busybox (X+openrc), but will ignore others (runit as
-# a systemd service)
 
-# NOTE: When we have no idea, nothing will be printed!
+case "$uname_s" in
-
-# NOTE:
-# When trying to gather information about the init system make sure to do so
-# without calling the binary!   On some systems this triggers a reinitialisation
-# of the system which we don't want (e.g. embedded systems).
-
-
-set -e
-
-KERNEL_NAME=$(uname -s)
-
-KNOWN_INIT_SYSTEMS=$(cat <<EOF
-systemd
-sysvinit
-upstart
-runit
-procd
-smf
-launchd
-init
-hurd_init
-systemstarter
-EOF
-)
-
-
-common_candidates_by_kernel() {
-	case $KERNEL_NAME
-	in
-		FreeBSD|NetBSD|OpenBSD)
-			echo init
-			;;
     Linux)
-			echo systemd
+        (pgrep -P0 -l | awk '/^1[ \t]/ {print $2;}') || true
-			echo sysvinit
-			echo upstart
     ;;
-		GNU)
+    FreeBSD|OpenBSD)
-			echo sysvinit
+        ps -o comm= -p 1 || true
-			echo hurd-init
-			;;
-		Darwin)
-			echo launchd
-			echo systemstarter
-			;;
-		SunOS)
-			echo smf
-			;;
-	esac
-}
-
-
-## Helpers
-
-trim() {
-	sed -e 's/^[[:blank:]]*//' -e 's/[[:blank:]]*$//' -e '/^[[:blank:]]*$/d'
-}
-
-unique() {
-	# Delete duplicate lines (keeping input order)
-	# NOTE: Solaris AWK breaks without if/print construct.
-	awk '{ if (!x[$0]++) print }'
-}
-
-
-## Check functions
-# These functions are used to verify if a guess is correct by checking some
-# common property of a running system (presence of a directory in /run etc.)
-
-check_busybox_init() (
-	busybox_path=${1:-/bin/busybox}
-	test -x "${busybox_path}" || return 1
-	grep -q 'BusyBox v[0-9]' "${busybox_path}" || return 1
-
-	# It is quite common to use Busybox init to stack other init systemd
-	# (like OpenRC) on top of it. So we check for that, too.
-	if stacked=$(check_openrc)
-	then
-		echo "busybox-init+${stacked}"
-	else
-		echo busybox-init
-	fi
-)
-
-check_hurd_init() (
-	init_exe=${1:-/hurd/init}
-	test -x "${init_exe}" || return 1
-	grep -q 'GNU Hurd' "${init_exe}" || return 1
-	echo hurd-init
-)
-
-check_init() {
-	# Checks for various BSD inits...
-	test -x /sbin/init || return 1
-
-	if grep -q -E '(Free|Net|Open)BSD' /sbin/init
-	then
-		echo init
-		return 0
-	fi
-}
-
-check_launchd() {
-	command -v launchctl >/dev/null 2>&1 || return 1
-	launchctl getenv PATH >/dev/null || return 1
-	echo launchd
-}
-
-check_openrc() {
-	test -f /run/openrc/softlevel || return 1
-	echo openrc
-}
-
-check_procd() (
-	procd_path=${1:-/sbin/procd}
-	test -x "${procd_path}" || return 1
-	grep -q 'procd' "${procd_path}" || return 1
-	echo procd
-)
-
-check_runit() {
-	test -d /run/runit || return 1
-	echo runit
-}
-
-check_smf() {
-	# XXX: Is this the correct way??
-	test -f /etc/svc/volatile/svc_nonpersist.db || return 1
-	echo smf
-}
-
-check_systemd() {
-	# NOTE: sd_booted(3)
-	test -d /run/systemd/system/ || return 1
-	# systemctl --version | sed -e '/^systemd/!d;s/^systemd //'
-	echo systemd
-}
-
-check_systemstarter() {
-	test -d /System/Library/StartupItems/ || return 1
-	test -f /System/Library/StartupItems/LoginWindow/StartupParameters.plist || return 1
-	echo init+SystemStarter
-}
-
-check_sysvinit() (
-	init_path=${1:-/sbin/init}
-	grep -q 'INIT_VERSION=sysvinit-[0-9.]*' "${init_path}" || return 1
-
-	# It is quite common to use SysVinit to stack other init systemd
-	# (like OpenRC) on top of it. So we check for that, too.
-	if stacked=$(check_openrc)
-	then
-		echo "sysvinit+${stacked}"
-	else
-		echo sysvinit
-	fi
-	unset stacked
-)
-
-check_upstart() {
-	test -x "$(command -v initctl)" || return 1
-	case $(initctl version)
-	in
-		*'(upstart '*')')
-			if test -d /etc/init
-			then
-				# modern (DBus-based?) upstart >= 0.5
-				echo upstart
-			elif test -d /etc/event.d
-			then
-				# ancient upstart
-				echo upstart-legacy
-			else
-				# whatever...
-				echo upstart
-			fi
     ;;
     *)
-			return 1
+        # return a empty string as unknown value
+        echo ""
     ;;
 esac
-}
-
-find_init_procfs() (
-	# First, check if the required file in procfs exists...
-	test -h /proc/1/exe || return 1
-
-	# Find init executable
-	init_exe=$(ls -l /proc/1/exe 2>/dev/null) || return 1
-	init_exe=${init_exe#* -> }
-
-	if ! test -x "$init_exe"
-	then
-		# On some rare occasions it can happen that the
-		# running init's binary has been replaced. In this
-		# case Linux adjusts the symlink to "X (deleted)"
-
-		# [root@fedora-12 ~]# readlink /proc/1/exe
-		# /sbin/init (deleted)
-		# [root@fedora-12 ~]# ls -l /proc/1/exe
-		# lrwxrwxrwx. 1 root root 0 2020-01-30 23:00 /proc/1/exe -> /sbin/init (deleted)
-
-		init_exe=${init_exe% (deleted)}
-		test -x "$init_exe" || return 1
-	fi
-
-	echo "${init_exe}"
-)
-
-guess_by_path() {
-	case $1
-	in
-		/bin/busybox)
-			check_busybox_init "$1" && return
-			;;
-		/lib/systemd/systemd)
-			check_systemd "$1" && return
-			;;
-		/hurd/init)
-			check_hurd_init "$1" && return
-			;;
-		/sbin/launchd)
-			check_launchd "$1" && return
-			;;
-		/usr/bin/runit|/sbin/runit)
-			check_runit "$1" && return
-			;;
-		/sbin/openrc-init)
-			if check_openrc "$1" >/dev/null
-			then
-				echo openrc-init
-				return
-			fi
-			;;
-		/sbin/procd)
-			check_procd "$1" && return
-			;;
-		/sbin/init|*/init)
-			# init: it could be anything -> (explicit) no match
-			return 1
-			;;
-	esac
-
-	# No match
-	return 1
-}
-
-guess_by_comm_name() {
-	case $1
-	in
-		busybox)
-			check_busybox_init && return
-			;;
-		openrc-init)
-			if check_openrc >/dev/null
-			then
-				echo openrc-init
-				return 0
-			fi
-			;;
-		init)
-			# init could be anything -> no match
-			return 1
-			;;
-		*)
-			# Run check function by comm name if available.
-			# Fall back to comm name if either it does not exist or
-			# returns non-zero.
-			if type "check_$1" >/dev/null
-			then
-				"check_$1" && return
-			else
-				echo "$1" ; return 0
-			fi
-	esac
-
-	return 1
-}
-
-check_list() (
-	# List must be a multi-line input on stdin (one name per line)
-	while read -r init
-	do
-		"check_${init}" || continue
-		return 0
-	done
-	return 1
-)
-
-
-# BusyBox's versions of ps and pgrep do not support some options
-# depending on which compile-time options have been used.
-
-find_init_pgrep() {
-	pgrep -P0 -fl 2>/dev/null | awk -F '[[:blank:]]' '$1 == 1 { print $2 }'
-}
-
-find_init_ps() {
-	case $KERNEL_NAME
-	in
-		Darwin)
-			ps -o command -p 1 2>/dev/null | tail -n +2
-			;;
-		FreeBSD)
-			ps -o args= -p 1 2>/dev/null | cut -d ' ' -f 1
-			;;
-		Linux)
-			ps -o comm= -p 1 2>/dev/null
-			;;
-		NetBSD)
-			ps -o comm= -p 1 2>/dev/null
-			;;
-		OpenBSD)
-			ps -o args -p 1 2>/dev/null | tail -n +2 | cut -d ' ' -f 1
-			;;
-		*)
-			ps -o args= -p 1 2>/dev/null
-			;;
-	esac | trim  # trim trailing whitespace (some ps like Darwin add it)
-}
-
-find_init() {
-	case $KERNEL_NAME
-	in
-		Linux|GNU|NetBSD)
-			find_init_procfs || find_init_pgrep || find_init_ps
-			;;
-		FreeBSD)
-			find_init_procfs || find_init_ps
-			;;
-		OpenBSD)
-			find_init_pgrep || find_init_ps
-			;;
-		Darwin|SunOS)
-			find_init_ps
-			;;
-		*)
-			echo "Don't know how to determine init." >&2
-			echo 'Please send a patch.' >&2
-			exit 1
-	esac
-}
-
-# -----
-
-init=$(find_init)
-
-# If we got a path, guess by the path first (fall back to file name if no match)
-# else guess by file name directly.
-# shellcheck disable=SC2015
-{
-	test -x "${init}" \
-		&& guess_by_path "${init}" \
-		|| guess_by_comm_name "$(basename "${init}")"
-} && exit 0 || true
-
-
-# Guessing based on the file path and name didn’t lead to a definitive result.
-#
-# We go through all of the checks until we find a match. To speed up the
-# process, common cases will be checked first based on the underlying kernel.
-
-{ common_candidates_by_kernel; echo "${KNOWN_INIT_SYSTEMS}"; } \
-	| unique | check_list

cdist/conf/explorer/os_release

@@ -1,7 +1,6 @@
 #!/bin/sh
 #
 # 2018 Adam Dej (dejko.a at gmail.com)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -22,17 +21,6 @@
 
 # See os-release(5) and http://0pointer.de/blog/projects/os-release
 
-if test -f /etc/os-release
+set +e
-then
-	# Linux and FreeBSD (usually a symlink)
-	cat /etc/os-release
-elif test -f /usr/lib/os-release
-then
-	# systemd
-	cat /usr/lib/os-release
-elif test -f /var/run/os-release
-then
-	# FreeBSD (created by os-release service)
-	cat /var/run/os-release
-fi
 
+cat /etc/os-release || cat /usr/lib/os-release || true

cdist/conf/explorer/os_version

@@ -70,7 +70,4 @@ case "$("$__explorer/os")" in
    ubuntu)
       lsb_release -sr
    ;;
-   alpine)
-       cat /etc/alpine-release
-   ;;
 esac

cdist/conf/type/__acl/gencode-remote

@@ -20,13 +20,7 @@
 
 file_is="$( cat "$__object/explorer/file_is" )"
 
-if [ "$file_is" = 'missing' ] \
+[ "$file_is" = 'missing' ] && [ -z "$__cdist_dry_run" ] && exit 0
-    && [ -z "$__cdist_dry_run" ] \
-    && \( [ ! -f "$__object/parameter/file" ] \
-        || [ ! -f "$__object/parameter/directory" ] \)
-then
-    exit 0
-fi
 
 os="$( cat "$__global/explorer/os" )"
 
@@ -34,20 +28,7 @@ acl_path="/$__object_id"
 
 acl_is="$( cat "$__object/explorer/acl_is" )"
 
-if [ -f "$__object/parameter/source" ]
+if [ -f "$__object/parameter/acl" ]
-then
-    acl_source="$( cat "$__object/parameter/source" )"
-
-    if [ "$acl_source" = '-' ]
-    then
-        acl_should="$( cat "$__object/stdin" )"
-    else
-        acl_should="$( grep -Ev '^#|^$' "$acl_source" )"
-    fi
-elif [ -f "$__object/parameter/entry" ]
-then
-    acl_should="$( cat "$__object/parameter/entry" )"
-elif [ -f "$__object/parameter/acl" ]
 then
     acl_should="$( cat "$__object/parameter/acl" )"
 elif

cdist/conf/type/__acl/man.rst

@@ -15,24 +15,10 @@ See ``setfacl`` and ``acl`` manpages for more details.
 
 REQUIRED MULTIPLE PARAMETERS
 ----------------------------
-entry
+acl
    Set ACL entry following ``getfacl`` output syntax.
 
 
-OPTIONAL PARAMETERS
--------------------
-source
-   Read ACL entries from stdin or file.
-   Ordering of entries is not important.
-   When reading from file, comments and empty lines are ignored.
-
-file
-   Create/change file with ``__file`` using ``user:group:mode`` pattern.
-
-directory
-   Create/change directory with ``__directory`` using ``user:group:mode`` pattern.
-
-
 BOOLEAN PARAMETERS
 ------------------
 default
@@ -50,8 +36,8 @@ remove
 
 DEPRECATED PARAMETERS
 ---------------------
-Parameters ``acl``, ``user``, ``group``, ``mask`` and ``other`` are deprecated and they
+Parameters ``user``, ``group``, ``mask`` and ``other`` are deprecated and they
-will be removed in future versions. Please use ``entry`` parameter instead.
+will be removed in future versions. Please use ``acl`` parameter instead.
 
 
 EXAMPLES
@@ -63,38 +49,27 @@ EXAMPLES
         --default \
         --recursive \
         --remove \
-        --entry user:alice:rwx \
+        --acl user:alice:rwx \
-        --entry user:bob:r-x \
+        --acl user:bob:r-x \
-        --entry group:project-group:rwx \
+        --acl group:project-group:rwx \
-        --entry group:some-other-group:r-x \
+        --acl group:some-other-group:r-x \
-        --entry mask::r-x \
+        --acl mask::r-x \
-        --entry other::r-x
+        --acl other::r-x
 
     # give Alice read-only access to subdir,
     # but don't allow her to see parent content.
 
     __acl /srv/project2 \
         --remove \
-        --entry default:group:secret-project:rwx \
+        --acl default:group:secret-project:rwx \
-        --entry group:secret-project:rwx \
+        --acl group:secret-project:rwx \
-        --entry user:alice:--x
+        --acl user:alice:--x
 
     __acl /srv/project2/subdir \
         --default \
         --remove \
-        --entry group:secret-project:rwx \
+        --acl group:secret-project:rwx \
-        --entry user:alice:r-x
+        --acl user:alice:r-x
-
-    # read acl from stdin
-    echo 'user:alice:rwx' \
-        | __acl /path/to/directory --source -
-
-    # create/change directory too
-    __acl /path/to/directory \
-        --default \
-        --remove \
-        --directory root:root:770 \
-        --entry user:nobody:rwx
 
 
 AUTHORS

cdist/conf/type/__acl/manifest

@@ -1,11 +0,0 @@
-#!/bin/sh -e
-
-for p in file directory
-do
-    [ ! -f "$__object/parameter/$p" ] && continue
-
-    "__$p" "/$__object_id" \
-        --owner "$( awk -F: '{print $1}' "$__object/parameter/$p" )" \
-        --group "$( awk -F: '{print $2}' "$__object/parameter/$p" )" \
-        --mode  "$( awk -F: '{print $3}' "$__object/parameter/$p" )"
-done

cdist/conf/type/__acl/parameter/deprecated/acl

@@ -1 +0,0 @@
-see manual for details

cdist/conf/type/__acl/parameter/optional

@@ -1,5 +1,2 @@
 mask
 other
-source
-file
-directory

cdist/conf/type/__acl/parameter/optional_multiple

@@ -1,4 +1,3 @@
-entry
 acl
 user
 group

cdist/conf/type/__apt_unattended_upgrades/man.rst

@@ -1,68 +0,0 @@
-cdist-type__apt_unattended_upgrades(7)
-======================================
-
-NAME
-----
-cdist-type__apt_unattended_upgrades - automatic installation of updates
-
-
-DESCRIPTION
------------
-
-Install and configure unattended-upgrades package.
-
-For more information see https://wiki.debian.org/UnattendedUpgrades.
-
-
-OPTIONAL MULTIPLE PARAMETERS
-----------------------------
-option
-   Set options for unattended-upgrades. See examples.
-
-   Supported options with default values (as of 2020-01-17) are:
-
-   - AutoFixInterruptedDpkg, default is "true"
-   - MinimalSteps, default is "true"
-   - InstallOnShutdown, default is "false"
-   - Mail, default is "" (empty)
-   - MailOnlyOnError, default is "false"
-   - Remove-Unused-Kernel-Packages, default is "true"
-   - Remove-New-Unused-Dependencies, default is "true"
-   - Remove-Unused-Dependencies, default is "false"
-   - Automatic-Reboot, default is "false"
-   - Automatic-Reboot-WithUsers, default is "true"
-   - Automatic-Reboot-Time, default is "02:00"
-   - SyslogEnable, default is "false"
-   - SyslogFacility, default is "daemon"
-   - OnlyOnACPower, default is "true"
-   - Skip-Updates-On-Metered-Connections, default is "true"
-   - Verbose, default is "false"
-   - Debug, default is "false"
-
-blacklist
-   Python regular expressions, matching packages to exclude from upgrading.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    __apt_unattended_upgrades \
-        --option Mail=root \
-        --option MailOnlyOnError=true \
-        --blacklist multipath-tools \
-        --blacklist open-iscsi
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2020 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option) any
-later version.

cdist/conf/type/__apt_unattended_upgrades/manifest

@@ -1,80 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-__package unattended-upgrades
-
-export require='__package/unattended-upgrades'
-
-# in normal circumstances 20auto-upgrades is managed
-# by debconf and it can only contain these lines
-
-__file /etc/apt/apt.conf.d/20auto-upgrades \
-    --owner root \
-    --group root \
-    --mode 644 \
-    --source - << EOF
-APT::Periodic::Update-Package-Lists "1";
-APT::Periodic::Unattended-Upgrade "1";
-EOF
-
-# lets not write into upstream 50unattended-upgrades file,
-# but use our own config file to avoid clashes
-
-conf_file='/etc/apt/apt.conf.d/51unattended-upgrades-cdist'
-
-conf='# this file is managed by cdist'
-
-if [ -f "$__object/parameter/option" ]
-then
-    o=''
-
-    while read -r l
-    do
-        o="$( printf '%s\nUnattended-Upgrade::%s "%s";\n' "$o" "${l%%=*}" "${l#*=}" )"
-    done \
-        < "$__object/parameter/option"
-
-    conf="$( printf '%s\n%s\n' "$conf" "$o" )"
-fi
-
-if [ -f "$__object/parameter/blacklist" ]
-then
-    b='Unattended-Upgrade::Package-Blacklist {'
-
-    while read -r l
-    do
-        b="$( printf '%s\n"%s";\n' "$b" "$l" )"
-    done \
-        < "$__object/parameter/blacklist"
-
-    conf="$( printf '%s\n%s\n}\n' "$conf" "$b" )"
-fi
-
-if [ "$( echo "$conf" | wc -l )" -gt 1 ]
-then
-    echo "$conf" \
-        | __file "$conf_file" \
-            --owner root \
-            --group root \
-            --mode 644 \
-            --source -
-else
-    __file "$conf_file" --state absent
-fi

cdist/conf/type/__apt_unattended_upgrades/parameter/optional_multiple

@@ -1,2 +0,0 @@
-option
-blacklist

cdist/conf/type/__consul_agent/man.rst

@@ -116,9 +116,6 @@ verify-incoming
 verify-outgoing
    enforce the use of TLS and verify the peers authenticity on outgoing connections
 
-use-distribution-package
-   uses distribution package instead of upstream binary
-
 
 EXAMPLES
 --------

cdist/conf/type/__consul_agent/manifest

@@ -2,7 +2,6 @@
 #
 # 2015 Steven Armstrong (steven-cdist at armstrong.cc)
 # 2015-2019 Nico Schottelius (nico-cdist at schottelius.org)
-# 2019 Timothée Floure (timothee.floure at ungleich.ch)
 #
 # This file is part of cdist.
 #
@@ -20,217 +19,66 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
+
 os=$(cat "$__global/explorer/os")
 
-###
-# Type parameters.
-
-state="$(cat "$__object/parameter/state")"
-user="$(cat "$__object/parameter/user")"
-group="$(cat "$__object/parameter/group")"
-release=$(cat "$__global/explorer/lsb_release")
-if [ -f "$__object/parameter/use-distribution-package" ]; then
-  use_distribution_package=1
-fi
-
-###
-# Those are default that might be overriden by os-specific logic.
-
-data_dir="/var/lib/consul"
-conf_dir="/etc/consul/conf.d"
-conf_file="config.json"
-tls_dir="$conf_dir/tls"
-
-###
-# Sane deployment, based on distribution package when available.
-
-distribution_setup () {
-  case "$os" in
-     debian)
-       # consul is only available starting Debian 10 (buster).
-       # See https://packages.debian.org/buster/consul
-       if [ "$release" -lt 10 ]; then
-         echo "Consul is not available for your debian release." >&2
-         echo "Please use the 'manual' (i.e. non-package) installation or \
-           upgrade the target system." >&2
-         exit 1
-       fi
-
-       # Override previously defined environment to match debian packaging.
-       conf_dir='/etc/consul.d'
-       user='consul'
-       group='consul'
-     ;;
-     alpine)
-       # consul is only available starting Alpine 3.12 (= edge during the 3.11 cycle).
-       # See https://pkgs.alpinelinux.org/packages?name=consul&branch=edge
-
-       # Override previously defined environment to match alpine packaging.
-       conf_dir='/etc/consul'
-       conf_file='server.json'
-       data_dir='/var/consul'
-       user='consul'
-       group='consul'
-     ;;
-     *)
-        echo "Your operating system ($os) is currently not supported with the \
-          --use-distribution-package flag (${__type##*/})." >&2
-        echo "Please use non-package installation or contribute an \
-          implementation for if you can." >&2
-        exit 1
-     ;;
-  esac
-
-  # Install consul package.
-  __package consul --state "$state"
-
-  export config_deployment_requires="__package/consul"
-}
-
-###
-# LEGACY manual deployment, kept for compatibility reasons.
-
-init_sysvinit()
-{
-    __file /etc/init.d/consul \
-        --owner root --group root --mode 0755 \
-        --state "$state" \
-        --source "$__type/files/consul.sysv-$1"
-    require="__file/etc/init.d/consul" __start_on_boot consul
-}
-
-init_systemd()
-{
-    __file /lib/systemd/system/consul.service \
-        --owner root --group root --mode 0644 \
-        --state "$state" \
-        --source "$__type/files/consul.systemd"
-        require="__file/lib/systemd/system/consul.service" __start_on_boot consul
-}
-
-init_upstart()
-{
-    __file /etc/init/consul-prepare.conf \
-        --owner root --group root --mode 0644 \
-        --state "$state" \
-        --source "$__type/files/consul-prepare.upstart"
-    require="__file/etc/init/consul-prepare.conf" \
-        __file /etc/init/consul.conf \
-            --owner root --group root --mode 0644 \
-            --state "$state" \
-            --source "$__type/files/consul.upstart"
-    require="__file/etc/init/consul.conf" __start_on_boot consul
-}
-
-manual_setup () {
 case "$os" in
    alpine|scientific|centos|debian|devuan|redhat|ubuntu)
       # whitelist safeguard
       :
    ;;
    *)
-        echo "Your operating system ($os) is currently not supported by this \
+      echo "Your operating system ($os) is currently not supported by this type (${__type##*/})." >&2
-          type (${__type##*/})." >&2
       echo "Please contribute an implementation for it if you can." >&2
       exit 1
    ;;
 esac
 
+state="$(cat "$__object/parameter/state")"
+user="$(cat "$__object/parameter/user")"
+group="$(cat "$__object/parameter/group")"
+data_dir="/var/lib/consul"
+conf_dir="/etc/consul/conf.d"
+conf_file="config.json"
+
 # FIXME: there has got to be a better way to handle the dependencies in this case
 case "$state" in
    present)
       __group "$group" --system --state "$state"
-        require="__group/$group" __user "$user" \
+      require="__group/$group" \
-          --system --gid "$group" --home "$data_dir" --state "$state"
+         __user "$user" --system --gid "$group" \
+            --home "$data_dir" --state "$state"
+      export require="__user/consul"
    ;;
-     *)
+   absent)
-        echo "The $state state is not (yet?) supported by this type." >&2
+      echo "Sorry, state=absent currently not supported :-(" >&2
       exit 1
+      require="$__object_name" \
+         __user "$user" --system --gid "$group" --state "$state"
+      require="__user/$user" \
+         __group "$group" --system --state "$state"
    ;;
 esac
 
-  # Create data directory.
+__directory /etc/consul \
-  require="__user/consul" __directory "$data_dir" \
+   --owner root --group "$group" --mode 750 --state "$state"
-    --owner "$user" --group "$group" --mode 770 --state "$state"
+require="__directory/etc/consul" \
-
+   __directory "$conf_dir" \
-  # Create config directory.
-  require="__user/consul" __directory "$conf_dir" \
-    --parents --owner root --group "$group" --mode 750 --state "$state"
-
-  # Install init script to start on boot
-  case "$os" in
-      devuan)
-          init_sysvinit debian
-          ;;
-      centos|redhat)
-          os_version="$(sed 's/[^0-9.]//g' "$__global/explorer/os_version")"
-          major_version="${os_version%%.*}"
-          case "$major_version" in
-              [456])
-                  init_sysvinit redhat
-                  ;;
-              7)
-                  init_systemd
-                  ;;
-              *)
-                  echo "Unsupported CentOS/Redhat version: $os_version" >&2
-                  exit 1
-                  ;;
-          esac
-          ;;
-
-      debian)
-          os_version=$(cat "$__global/explorer/os_version")
-          major_version="${os_version%%.*}"
-
-          case "$major_version" in
-              [567])
-                  init_sysvinit debian
-              ;;
-              [89]|10)
-                  init_systemd
-              ;;
-              *)
-                  echo "Unsupported Debian version $os_version" >&2
-                  exit 1
-              ;;
-          esac
-          ;;
-
-      ubuntu)
-          init_upstart
-          ;;
-  esac
-
-  config_deployment_requires="__user/consul __directory/$conf_dir"
-}
-
-###
-# Trigger requested installation method.
-if [ $use_distribution_package ]; then
-  distribution_setup
-else
-  manual_setup
-fi
-
-###
-# Install TLS certificates.
-
-if [ -f "$__object/parameter/ca-file-source" ] || \
-   [ -f "$__object/parameter/cert-file-source" ] || \
-   [ -f "$__object/parameter/key-file-source" ]; then
-
-   requires="$config_deployment_requires" __directory $tls_dir \
       --owner root --group "$group" --mode 750 --state "$state"
 
-   # Append to service restart requirements.
+if [ -f "$__object/parameter/ca-file-source" ] || [ -f "$__object/parameter/cert-file-source" ] || [ -f "$__object/parameter/key-file-source" ]; then
-   restart_requires="$restart_requires __directory/$conf_dir/tls"
+   # create directory for ssl certs
+   require="__directory/etc/consul" \
+      __directory /etc/consul/ssl \
+         --owner root --group "$group" --mode 750 --state "$state"
 fi
 
-###
+__directory "$data_dir" \
-# Generate and deploy configuration.
+   --owner "$user" --group "$group" --mode 770 --state "$state"
 
-json_configuration=$(
+
+# Generate json config file
+(
 echo "{"
 
 # parameters we define ourself
@@ -239,11 +87,11 @@ json_configuration=$(
 cd "$__object/parameter/"
 for param in *; do
    case "$param" in
-        state|user|group|json-config|use-distribution-package) continue ;;
+      state|user|group|json-config) continue ;;
       ca-file-source|cert-file-source|key-file-source)
          source="$(cat "$__object/parameter/$param")"
-           destination="$tls_dir/${source##*/}"
+         destination="/etc/consul/ssl/${source##*/}"
-           require="__directory/$tls_dir" \
+         require="__directory/etc/consul/ssl" \
             __file "$destination" \
                --owner root --group consul --mode 640 \
                --source "$source" \
@@ -251,8 +99,7 @@ json_configuration=$(
          key="$(echo "${param%-*}" | tr '-' '_')"
          printf '   ,"%s": "%s"\n' "$key" "$destination"
       ;;
-        disable-remote-exec|disable-update-check|leave-on-terminate\
+      disable-remote-exec|disable-update-check|leave-on-terminate|rejoin-after-leave|server|enable-syslog|verify-incoming|verify-outgoing)
-          |rejoin-after-leave|server|enable-syslog|verify-incoming|verify-outgoing)
          # handle boolean parameters
          key="$(echo "$param" | tr '-' '_')"
          printf '   ,"%s": true\n' "$key"
@@ -292,16 +139,87 @@ json_configuration=$(
    printf '   ,%s\n' "$json"
 fi
 echo "}"
-)
+) | \
-echo "$json_configuration" | require="$config_deployment_requires" \
+require="__directory${conf_dir}" \
-  __file "$conf_dir/$conf_file" \
+   __config_file "${conf_dir}/${conf_file}" \
       --owner root --group "$group" --mode 640 \
       --state "$state" \
+      --onchange 'service consul status >/dev/null && service consul reload || true' \
       --source -
 
-# Set configuration deployment as requirement for service restart.
+init_sysvinit()
-restart_requires="__file/$conf_dir/$conf_file"
+{
+    __file /etc/init.d/consul \
+        --owner root --group root --mode 0755 \
+        --state "$state" \
+        --source "$__type/files/consul.sysv-$1"
+    require="__file/etc/init.d/consul" __start_on_boot consul
+}
 
-###
+init_systemd()
-# Restart consul agent after everything else.
+{
-require="$restart_requires" __service consul --action restart
+    __file /lib/systemd/system/consul.service \
+        --owner root --group root --mode 0644 \
+        --state "$state" \
+        --source "$__type/files/consul.systemd"
+        require="__file/lib/systemd/system/consul.service" __start_on_boot consul
+}
+
+init_upstart()
+{
+    __file /etc/init/consul-prepare.conf \
+        --owner root --group root --mode 0644 \
+        --state "$state" \
+        --source "$__type/files/consul-prepare.upstart"
+    require="__file/etc/init/consul-prepare.conf" \
+        __file /etc/init/consul.conf \
+            --owner root --group root --mode 0644 \
+            --state "$state" \
+            --source "$__type/files/consul.upstart"
+    require="__file/etc/init/consul.conf" __start_on_boot consul
+}
+
+# Install init script to start on boot
+case "$os" in
+    devuan)
+        init_sysvinit debian
+        ;;
+    centos|redhat)
+        os_version="$(sed 's/[^0-9.]//g' "$__global/explorer/os_version")"
+        major_version="${os_version%%.*}"
+        case "$major_version" in
+            [456])
+                init_sysvinit redhat
+                ;;
+            7)
+                init_systemd
+                ;;
+            *)
+                echo "Unsupported CentOS/Redhat version: $os_version" >&2
+                exit 1
+                ;;
+        esac
+        ;;
+
+    debian)
+        os_version=$(cat "$__global/explorer/os_version")
+        major_version="${os_version%%.*}"
+
+        case "$major_version" in
+            [567])
+                init_sysvinit debian
+            ;;
+            [89])
+                init_systemd
+            ;;
+            *)
+                echo "Unsupported Debian version $os_version" >&2
+                exit 1
+            ;;
+        esac
+        ;;
+
+    ubuntu)
+        init_upstart
+        ;;
+esac

cdist/conf/type/__consul_agent/parameter/boolean

@@ -6,4 +6,3 @@ server
 enable-syslog
 verify-incoming
 verify-outgoing
-use-distribution-package

cdist/conf/type/__consul_check/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_check/manifest

@@ -19,7 +19,7 @@
 #
 
 name="$(cat "$__object/parameter/name" 2>/dev/null || echo "$__object_id")"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="check_${name}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_service/explorer/conf-dir

@@ -1,15 +0,0 @@
-# Determine the configuration directory used by consul.
-
-check_dir () {
-  if [ -d "$1" ]; then
-    printf '%s' "$1"
-    exit
-  fi
-}
-
-check_dir '/etc/consul/conf.d'
-check_dir '/etc/consul.d'
-check_dir '/etc/consul'
-
-echo 'Could not determine consul configuration dir. Exiting.' >&2
-exit 1

cdist/conf/type/__consul_service/manifest

@@ -19,7 +19,7 @@
 #
 
 name="$(cat "$__object/parameter/name" 2>/dev/null || echo "$__object_id")"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="service_${name}.json"
 state="$(cat "$__object/parameter/state")"
 
@@ -45,7 +45,7 @@ printf '      "name": "%s"\n' "$name"
 cd "$__object/parameter/"
 for param in *; do
    case "$param" in
-      state|name|check-interval|conf-dir) continue ;;
+      state|name|check-interval) continue ;;
       check-script)
          printf '     ,"check": {\n'
          printf '         "script": "%s"\n' "$(cat "$__object/parameter/check-script")"
@@ -86,6 +86,7 @@ echo "   }"
 # end json file
 echo "}"
 ) | \
+require="__directory${conf_dir}" \
    __config_file "${conf_dir}/${conf_file}" \
       --owner root --group consul --mode 640 \
       --state "$state" \

cdist/conf/type/__consul_watch_checks/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_checks/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_watch_event/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_event/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_watch_key/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_key/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_watch_keyprefix/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_keyprefix/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_watch_nodes/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_nodes/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_watch_service/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_service/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__consul_watch_services/explorer/conf-dir

@@ -1 +0,0 @@
-../../__consul_service/explorer/conf-dir

cdist/conf/type/__consul_watch_services/manifest

@@ -20,7 +20,7 @@
 
 cdist_type="${__type##*/}"
 watch_type="${cdist_type##*_}"
-conf_dir=$(cat "$__object/explorer/conf-dir")
+conf_dir="/etc/consul/conf.d"
 conf_file="watch_${watch_type}_${__object_id}.json"
 state="$(cat "$__object/parameter/state")"
 

cdist/conf/type/__cron/gencode-remote

@@ -31,28 +31,24 @@ if [ -f "$__object/parameter/raw" ]; then
 elif [ -f "$__object/parameter/raw_command" ]; then
    entry="$command"
 else
-   minute="$(cat "$__object/parameter/minute")"
+   minute="$(cat "$__object/parameter/minute" 2>/dev/null || echo "*")"
-   hour="$(cat "$__object/parameter/hour")"
+   hour="$(cat "$__object/parameter/hour" 2>/dev/null || echo "*")"
-   day_of_month="$(cat "$__object/parameter/day_of_month")"
+   day_of_month="$(cat "$__object/parameter/day_of_month" 2>/dev/null || echo "*")"
-   month="$(cat "$__object/parameter/month")"
+   month="$(cat "$__object/parameter/month" 2>/dev/null || echo "*")"
-   day_of_week="$(cat "$__object/parameter/day_of_week")"
+   day_of_week="$(cat "$__object/parameter/day_of_week" 2>/dev/null || echo "*")"
    entry="$minute $hour $day_of_month $month $day_of_week $command # $name"
 fi
 
 mkdir "$__object/files"
 echo "$entry" > "$__object/files/entry"
 
-if [ -s "$__object/explorer/entry" ]; then
 if diff -q "$__object/files/entry" "$__object/explorer/entry" >/dev/null; then
     state_is=present
-    else
-        state_is=modified
-    fi
 else
     state_is=absent
 fi
 
-state_should="$(cat "$__object/parameter/state")"
+state_should="$(cat "$__object/parameter/state" 2>/dev/null || echo "present")"
 
 [ "$state_is" = "$state_should" ] && exit 0
 

cdist/conf/type/__cron/manifest

@@ -22,12 +22,3 @@ if [ -f "$__object/parameter/raw" ] && [ -f "$__object/parameter/raw_command" ];
     echo "ERROR: both raw and raw_command specified" >&2
     exit 1
 fi
-
-case "$(cat "$__object/parameter/state")" in
-    present) ;;
-    absent) ;;
-
-    *)
-        echo "ERROR: unkown cron state" >&2
-        exit 2
-esac

cdist/conf/type/__cron/parameter/default/day_of_month

@@ -1 +0,0 @@
-*

cdist/conf/type/__cron/parameter/default/day_of_week

@@ -1 +0,0 @@
-*

cdist/conf/type/__cron/parameter/default/hour

@@ -1 +0,0 @@
-*

cdist/conf/type/__cron/parameter/default/minute

@@ -1 +0,0 @@
-*

cdist/conf/type/__cron/parameter/default/month

@@ -1 +0,0 @@
-*

cdist/conf/type/__cron/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__directory/explorer/stat

@@ -1,7 +1,6 @@
 #!/bin/sh
 #
 # 2013 Steven Armstrong (steven-cdist armstrong.cc)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -21,43 +20,24 @@
 
 destination="/$__object_id"
 
-fallback() {
-   # Patch the output together, manually
-
-   ls_line=$(ls -ldn "$destination")
-
-   uid=$(echo "$ls_line" | awk '{ print $3 }')
-   gid=$(echo "$ls_line" | awk '{ print $4 }')
-
-   owner=$(awk -F: -v uid="$uid" '$3 == uid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/passwd)
-   group=$(awk -F: -v uid="$uid" '$3 == uid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/group)
-
-   mode_text=$(echo "$ls_line" | awk '{ print $1 }')
-   mode=$(echo "$mode_text" | awk '{ k=0; for (i=0; i<=8; i++) k += ((substr($1, i+2, 1) ~ /[rwx]/) * 2^(8-i)); printf("%0o", k) }')
-
-   printf 'type: %s\nowner: %d %s\ngroup: %d %s\nmode: %s %s\n' \
-      "$("$__type_explorer/type")" \
-      "$uid" "$owner" \
-      "$gid" "$group" \
-      "$mode" "$mode_text"
-}
-
 # nothing to work with, nothing we could do
 [ -e "$destination" ] || exit 0
 
-if ! command -v stat >/dev/null
+os=$("$__explorer/os")
-then
+case "$os" in
-   fallback
-   exit
-fi
-
-case $("$__explorer/os") in
    "freebsd"|"netbsd"|"openbsd"|"macosx")
       stat -f "type: %HT
 owner: %Du %Su
 group: %Dg %Sg
 mode: %Lp %Sp
-" "$destination" | awk '/^type/ { print tolower($0); next } { print }'
+" "$destination" | awk '/^type/ { print tolower($0); next; } { print; }'
+      ;;
+   alpine)
+      stat -c "type: %F
+owner: %u %U
+group: %g %G
+mode: %a %A
+" "$destination"
       ;;
     solaris)
         ls1="$( ls -ld "$destination" )"
@@ -89,12 +69,10 @@ mode: %Lp %Sp
         echo "mode: $octets $( echo "$ls1" | awk '{print $1}' )"
     ;;
    *)
-      # NOTE: Do not use --printf here as it is not supported by BusyBox stat.
+       stat --printf="type: %F
-      # NOTE: BusyBox's stat might not support the "-c" option, in which case
-      #       we fall through to the shell fallback.
-       stat -c "type: %F
 owner: %u %U
 group: %g %G
-mode: %a %A" "$destination" 2>/dev/null || fallback
+mode: %a %A
+" "$destination"
    ;;
 esac

cdist/conf/type/__directory/gencode-remote

@@ -3,7 +3,6 @@
 # 2011-2013 Nico Schottelius (nico-cdist at schottelius.org)
 # 2013 Steven Armstrong (steven-cdist armstrong.cc)
 # 2014 Daniel Heule (hda at sfs.biz)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -22,8 +21,8 @@
 #
 
 destination="/$__object_id"
-state_should=$(cat "$__object/parameter/state")
+state_should="$(cat "$__object/parameter/state")"
-type=$(cat "$__object/explorer/type")
+type="$(cat "$__object/explorer/type")"
 stat_file="$__object/explorer/stat"
 
 # variable to keep track if we have to set directory attributes
@@ -73,7 +72,7 @@ set_mode() {
 }
 
 case "$state_should" in
-   present|exists)
+   present)
       if [ "$type" != "directory" ]; then
          set_attributes=1
          if [ "$type" != "none" ]; then
@@ -84,10 +83,6 @@ case "$state_should" in
          fi
          echo "mkdir $mkdiropt '$destination'"
          echo "create" >> "$__messages_out"
-      elif [ "$state_should" = 'exists' ]; then
-         # The type is directory and --state exists. We are done and do not
-         # check or set the attributes.
-         exit 0
       fi
 
       # Note: Mode - needs to happen last as a chown/chgrp can alter mode by
@@ -108,26 +103,6 @@ case "$state_should" in
          fi
       done
    ;;
-   pre-exists)
-      case $type in
-         directory)
-            # all good
-            exit 0
-         ;;
-         none)
-            printf 'Directory "%s" does not exist\n' "$destination" >&2
-            exit 1
-         ;;
-         file|symlink)
-            printf 'File "%s" exists and is a %s, but should be a directory\n' "$destination" "$type" >&2
-            exit 1
-         ;;
-         *)
-            printf 'File or directory "%s" is in an unknown state\n' "$destination" >&2
-            exit 1
-         ;;
-      esac
-   ;;
    absent)
         if [ "$type" = "directory" ]; then
             echo "rm -rf '$destination'"

cdist/conf/type/__directory/man.rst

@@ -19,18 +19,7 @@ None.
 OPTIONAL PARAMETERS
 -------------------
 state
-   'present', 'absent', 'exists' or 'pre-exists', defaults to 'present' where:
+   'present' or 'absent', defaults to 'present'
-
-   present
-      the directory exists and the given attributes are set.
-   absent
-      the directory does not exist.
-   exists
-      the directory exists, but its attributes are not altered if it already
-      existed.
-   pre-exists
-      check that the directory exists and is indeed a directory, but do not
-      create or modify it.
 
 group
    Group to chgrp to.

cdist/conf/type/__file/explorer/stat

@@ -2,7 +2,6 @@
 #
 # 2013 Steven Armstrong (steven-cdist armstrong.cc)
 # 2019 Nico Schottelius (nico-cdist at schottelius.org)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -22,54 +21,29 @@
 
 destination="/$__object_id"
 
-fallback() {
-   # Fallback: Patch the output together, manually.
-
-   ls_line=$(ls -ldn "$destination")
-
-   uid=$(echo "$ls_line" | awk '{ print $3 }')
-   gid=$(echo "$ls_line" | awk '{ print $4 }')
-
-   owner=$(awk -F: -v uid="$uid" '$3 == uid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/passwd)
-   group=$(awk -F: -v uid="$uid" '$3 == uid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/group)
-
-   mode_text=$(echo "$ls_line" | awk '{ print $1 }')
-   mode=$(echo "$mode_text" | awk '{ k=0; for (i=0; i<=8; i++) k += ((substr($1, i+2, 1) ~ /[rwx]/) * 2^(8-i)); printf("%0o", k) }')
-
-   size=$(echo "$ls_line" | awk '{ print $5 }')
-   links=$(echo "$ls_line" | awk '{ print $2 }')
-
-   printf 'type: %s\nowner: %d %s\ngroup: %d %s\nmode: %s %s\nsize: %d\nlinks: %d\n' \
-      "$("$__type_explorer/type")" \
-      "$uid" "$owner" \
-      "$gid" "$group" \
-      "$mode" "$mode_text" \
-      "$size" \
-      "$links"
-}
-
-
 # nothing to work with, nothing we could do
 [ -e "$destination" ] || exit 0
 
-
+os=$("$__explorer/os")
-if ! command -v stat >/dev/null
+case "$os" in
-then
+   "freebsd"|"netbsd"|"openbsd"|"macosx")
-   fallback
-   exit
-fi
-
-
-case $("$__explorer/os")
-in
-   freebsd|netbsd|openbsd|macosx)
       stat -f "type: %HT
 owner: %Du %Su
 group: %Dg %Sg
 mode: %Lp %Sp
 size: %Dz
 links: %Dl
-" "$destination" | awk '/^type/ { print tolower($0); next } { print }'
+" "$destination" | awk '/^type/ { print tolower($0); next; } { print; }'
+      ;;
+   alpine)
+       # busybox stat
+      stat -c "type: %F
+owner: %u %U
+group: %g %G
+mode: %a %A
+size: %s
+links: %h
+" "$destination"
       ;;
     solaris)
         ls1="$( ls -ld "$destination" )"
@@ -103,14 +77,12 @@ links: %Dl
         echo "links: $( echo "$ls1" | awk '{print $2}' )"
     ;;
    *)
-      # NOTE: Do not use --printf here as it is not supported by BusyBox stat.
+      stat --printf="type: %F
-      # NOTE: BusyBox's stat might not support the "-c" option, in which case
-      #       we fall through to the shell fallback.
-      stat -c "type: %F
 owner: %u %U
 group: %g %G
 mode: %a %A
 size: %s
-links: %h" "$destination" 2>/dev/null || fallback
+links: %h
+" "$destination"
       ;;
 esac

cdist/conf/type/__file/gencode-local

@@ -31,24 +31,12 @@ if [ "$state_should" = "pre-exists" ]; then
       exit 1
    fi
 
-   case $type in
+   if [ "$type" = "file" ]; then
-      file)
+      exit 0 # nothing to do
-         # nothing to do
+   else
-         exit 0
+      echo "File \"$destination\" does not exist"
-      ;;
-      none)
-         printf 'File "%s" does not exist\n' "$destination" >&2
       exit 1
-      ;;
+   fi
-      directory|symlink)
-         printf 'File "%s" exists and is a %s, but should be a regular file\n' "$destination" "$type" >&2
-         exit 1
-      ;;
-      *)
-         printf 'File or directory "%s" is in an unknown state\n' "$destination" >&2
-         exit 1
-      ;;
-   esac
 fi
 
 upload_file=

cdist/conf/type/__file/gencode-remote

@@ -61,7 +61,7 @@ set_mode() {
 }
 
 case "$state_should" in
-    present|exists)
+    present|exists|pre-exists)
     # Note: Mode - needs to happen last as a chown/chgrp can alter mode by
     #  clearing S_ISUID and S_ISGID bits (see chown(2))
     for attribute in group owner mode; do
@@ -83,11 +83,7 @@ case "$state_should" in
         # set-attributes is created if file is created or uploaded in gencode-local
         fire_onchange=1
     fi
-    ;;
 
-    pre-exists)
-        # pre-exists should never reach gencode-remote…
-        exit 1
     ;;
 
     absent)

cdist/conf/type/__letsencrypt_cert/man.rst

@@ -59,13 +59,13 @@ MESSAGES
 --------
 
 change
-    Certificate was changed.
+    Certificte was changed.
 
 create
-    Certificate was created.
+    Certificte was created.
 
 remove
-    Certificate was removed.
+    Certificte was removed.
 
 EXAMPLES
 --------

cdist/conf/type/__line/explorer/state

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 #
 # 2018 Steven Armstrong (steven-cdist at armstrong.cc)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -19,14 +18,6 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-if [ -f "$__object/parameter/file" ]; then
-   file=$(cat "$__object/parameter/file")
-else
-   file="/$__object_id"
-fi
-
-[ -f "$file" ] || exit 0
-
 if [ -f "$__object/parameter/before" ]; then
    position="before"
 elif [ -f "$__object/parameter/after" ]; then
@@ -42,56 +33,63 @@ else
    needle="line"
 fi
 
+if [ -f "$__object/parameter/file" ]; then
+   file="$(cat "$__object/parameter/file")"
+else
+   file="/$__object_id"
+fi
+
+if [ ! -f "$file" ]; then
+  echo "file_missing"
+  exit 0
+fi
+
 awk -v position="$position" -v needle="$needle" '
 function _find(_text, _pattern) {
    if (needle == "regex") {
       return match(_text, _pattern)
    } else {
-      return index(_text, _pattern) == 1
+      return index(_text, _pattern)
    }
 }
 BEGIN {
    getline anchor < (ENVIRON["__object"] "/parameter/" position)
    getline pattern < (ENVIRON["__object"] "/parameter/" needle)
-
+   state = "absent"
-   found_line = 0
-   correct_pos = (position != "after" && position != "before")
 }
 {
    if (position == "after") {
       if (match($0, anchor)) {
          getline
          if (_find($0, pattern)) {
-            found_line++
+            state = "present"
-            correct_pos = 1
+         }
+         else {
+            state = "wrongposition"
+         }
          exit 0
       }
-      } else if (_find($0, pattern)) {
-         found_line++
    }
-   } else if (position == "before") {
+   else if (position == "before") {
       if (_find($0, pattern)) {
-         found_line++
          getline
          if (match($0, anchor)) {
-            correct_pos = 1
+            state = "present"
+         }
+         else {
+            state = "wrongposition"
+         }
          exit 0
       }
    }
-   } else {
+   else {
       if (_find($0, pattern)) {
-         found_line++
+         state = "present"
          exit 0
       }
    }
 }
 END {
-   if (found_line && correct_pos) {
+   print state
-      print "present"
-   } else if (found_line) {
-      print "wrongposition"
-   } else {
-      print "absent"
-   }
 }
 ' "$file"

cdist/conf/type/__line/gencode-remote

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 #
 # 2018 Steven Armstrong (steven-cdist at armstrong.cc)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -24,20 +23,9 @@ if [ -f "$__object/parameter/before" ] && [ -f "$__object/parameter/after" ]; th
    exit 1
 fi
 
-if [ -f "$__object/parameter/file" ]; then
-   file="$(cat "$__object/parameter/file")"
-else
-   file="/$__object_id"
-fi
-
 state_should="$(cat "$__object/parameter/state")"
 state_is="$(cat "$__object/explorer/state")"
 
-if [ -z "$state_is" ]; then
-   printf 'The file "%s" is missing. Please create it before using %s on it.\n' "$file" "${__type##*/}" >&2
-   exit 1
-fi
-
 if [ "$state_should" = "$state_is" ]; then
    # nothing to do
    exit 0
@@ -58,6 +46,12 @@ else
    needle="line"
 fi
 
+if [ -f "$__object/parameter/file" ]; then
+   file="$(cat "$__object/parameter/file")"
+else
+   file="/$__object_id"
+fi
+
 add=0
 remove=0
 case "$state_should" in
@@ -110,12 +104,10 @@ BEGIN {
       if (anchor && match(\$0, anchor)) {
          if (position == "before") {
             print line
-            add = 0
             print
          } else if (position == "after") {
             print
             print line
-            add = 0
          }
          next
       }
@@ -123,7 +115,7 @@ BEGIN {
    print
 }
 END {
-   if (add) {
+   if (add && position == "end") {
       print line
    }
 }

cdist/conf/type/__mysql_database/explorer/state

@@ -1,33 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-if [ -f "$__object/parameter/name" ]
-then
-    name="$( cat "$__object/parameter/name" )"
-else
-    name="$__object_id"
-fi
-
-if [ -n "$( mysql -B -N -e "show databases like '$name'" )" ]
-then
-    echo 'present'
-else
-    echo 'absent'
-fi

cdist/conf/type/__mysql_database/gencode-remote

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 #
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
+# 2012 Benedikt Koeppel (code@benediktkoeppel.ch)
 #
 # This file is part of cdist.
 #
@@ -17,30 +17,38 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
+#
 
-state_is="$( cat "$__object/explorer/state" )"
+# if --database was specified
-
+if [ -f "$__object/parameter/name" ]; then
-state_should="$( cat "$__object/parameter/state" )"
+   database="$(cat "$__object/parameter/name")"
-
+else # otherwise use the object id as database name
-if [ "$state_is" = "$state_should" ]
+   database="$__object_id"
-then
-    exit 0
 fi
 
-if [ -f "$__object/parameter/name" ]
+cat <<-EOFF
-then
+mysql -u root <<-EOF
-    name="$( cat "$__object/parameter/name" )"
+	CREATE DATABASE IF NOT EXISTS $database
+EOF
+EOFF
+
+# if --user was specified
+if [ -f "$__object/parameter/user" ]; then
+   user="$(cat "$__object/parameter/user")"
+
+   # if --password was specified
+   if [ -f "$__object/parameter/password" ]; then
+      password="$(cat "$__object/parameter/password")"
+      cat <<-EOFF
+      mysql -u root <<-EOF
+      	GRANT ALL PRIVILEGES ON $database.* to '$user'@'localhost' IDENTIFIED BY '$password';
+EOF
+EOFF
    else
-    name="$__object_id"
+      cat <<-EOFF
+      mysql -u root <<-EOF
+      	GRANT ALL PRIVILEGES ON $database.* to '$user'@'localhost';
+EOF
+EOFF
+   fi
 fi
-
-case "$state_should" in
-    present)
-        echo "mysql -e 'create database \`$name\`'"
-        echo "create database $name" >> "$__messages_out"
-    ;;
-    absent)
-        echo "mysql -e 'drop database \`$name\`'"
-        echo "drop database $name" >> "$__messages_out"
-    ;;
-esac

cdist/conf/type/__mysql_database/man.rst

@@ -8,24 +8,24 @@ cdist-type__mysql_database - Manage a MySQL database
 
 DESCRIPTION
 -----------
+This cdist type allows you to install a MySQL database.
 
-Create MySQL database and optionally user with all privileges.
 
+REQUIRED PARAMETERS
+-------------------
+None.
 
 OPTIONAL PARAMETERS
 -------------------
 name
-   Name of database. Defaults to object id.
+   The name of the database to install
+   defaults to the object id
 
 user
-   Create user and give all privileges to database.
+   A user that should have access to the database
 
 password
-   Password for user.
+   The password for the user who manages the database
-
-state
-   Defaults to present.
-   If absent and user is also set, both will be removed (with privileges).
 
 
 EXAMPLES
@@ -33,23 +33,17 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # just create database
+    __mysql_database "cdist" --name "cdist" --user "myuser" --password "mypwd"
-    __mysql_database foo
-
-    # create database with respective user with all privileges to database
-    __mysql_database bar \
-        --user name \
-        --password secret
 
 
 AUTHORS
 -------
-Ander Punnar <ander-at-kvlt-dot-ee>
+Benedikt Koeppel <code@benediktkoeppel.ch>
 
 
 COPYING
 -------
-Copyright \(C) 2020 Ander Punnar. You can redistribute it and/or modify it
+Copyright \(C) 2012 Benedikt Koeppel. You can redistribute it
-under the terms of the GNU General Public License as published by the Free
+and/or modify it under the terms of the GNU General Public License as
-Software Foundation, either version 3 of the License, or (at your option) any
+published by the Free Software Foundation, either version 3 of the
-later version.
+License, or (at your option) any later version.

cdist/conf/type/__mysql_database/manifest

@@ -1,52 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-if [ -f "$__object/parameter/user" ]
-then
-    user="$( cat "$__object/parameter/user" )"
-fi
-
-if [ -f "$__object/parameter/password" ]
-then
-    password="$( cat "$__object/parameter/password" )"
-fi
-
-if [ -n "$user" ] && [ -n "$password" ]
-then
-    if [ -f "$__object/parameter/name" ]
-    then
-        database="$( cat "$__object/parameter/name" )"
-    else
-        database="$__object_id"
-    fi
-
-    state_should="$( cat "$__object/parameter/state" )"
-
-    __mysql_user "$user" \
-        --password "$password" \
-        --state "$state_should"
-
-    # removing user should remove all user's privileges
-    require="__mysql_user/$user" \
-        __mysql_privileges "$database/$user" \
-            --database "$database" \
-            --user "$user" \
-            --state "$state_should"
-fi

cdist/conf/type/__mysql_database/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__mysql_database/parameter/optional

@@ -1,4 +1,3 @@
 name
 user
 password
-state

cdist/conf/type/__mysql_privileges/explorer/state

@@ -1,40 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-privileges="$( cat "$__object/parameter/privileges" )"
-
-database="$( cat "$__object/parameter/database" )"
-
-table="$( cat "$__object/parameter/table" )"
-
-user="$( cat "$__object/parameter/user" )"
-
-host="$( cat "$__object/parameter/host" )"
-
-check_privileges="$( 
-    mysql -B -N -e "show grants for '$user'@'$host'" \
-        | grep -Ei "^grant $privileges on .$database.\..?$table.? to " || true )"
-
-if [ -n "$check_privileges" ]
-then
-    echo 'present'
-else
-    echo 'absent'
-fi

cdist/conf/type/__mysql_privileges/gencode-remote

@@ -1,55 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-state_is="$( cat "$__object/explorer/state" )"
-
-state_should="$( cat "$__object/parameter/state" )"
-
-if [ "$state_is" = "$state_should" ]
-then
-    exit 0
-fi
-
-privileges="$( cat "$__object/parameter/privileges" )"
-
-database="$( cat "$__object/parameter/database" )"
-
-table="$( cat "$__object/parameter/table" )"
-
-user="$( cat "$__object/parameter/user" )"
-
-host="$( cat "$__object/parameter/host" )"
-
-if [ "$table" != '*' ]
-then
-    # shellcheck disable=SC2016
-    table="$( printf '`%s`' "$table" )"
-fi
-
-case "$state_should" in
-    present)
-        echo "mysql -e 'grant $privileges on \`$database\`.$table to \`$user\`@\`$host\`'"
-        echo "grant $privileges on $database.$table to $user@$host" >> "$__messages_out"
-    ;;
-    absent)
-        echo "mysql -e 'revoke $privileges on \`$database\`.$table from \`$user\`@\`$host\`'"
-        echo "revoke $privileges on $database.$table from $user@$host" >> "$__messages_out"
-    ;;
-esac

cdist/conf/type/__mysql_privileges/man.rst

@@ -1,57 +0,0 @@
-cdist-type__mysql_privileges(7)
-===============================
-
-NAME
-----
-cdist-type__mysql_privileges - Manage MySQL privileges
-
-
-DESCRIPTION
------------
-
-Grant and revoke privileges of MySQL user.
-
-
-REQUIRED PARAMETERS
--------------------
-database
-   Name of database.
-
-user
-   Name of user.
-
-
-OPTIONAL PARAMETERS
--------------------
-privileges
-   Defaults to "all".
-
-table
-   Defaults to "*".
-
-host
-   Defaults to localhost.
-
-state
-   "present" grants and "absent" revokes. Defaults to present.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    __mysql_privileges user-to-db --database db --user user
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2020 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option) any
-later version.

cdist/conf/type/__mysql_privileges/parameter/default/host

@@ -1 +0,0 @@
-localhost

cdist/conf/type/__mysql_privileges/parameter/default/privileges

@@ -1 +0,0 @@
-all privileges

cdist/conf/type/__mysql_privileges/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__mysql_privileges/parameter/default/table

@@ -1 +0,0 @@
-*

cdist/conf/type/__mysql_privileges/parameter/optional

@@ -1,4 +0,0 @@
-privileges
-table
-host
-state

cdist/conf/type/__mysql_privileges/parameter/required

@@ -1,2 +0,0 @@
-database
-user

cdist/conf/type/__mysql_user/explorer/state

@@ -1,54 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-if [ -f "$__object/parameter/name" ]
-then
-    name="$( cat "$__object/parameter/name" )"
-else
-    name="$__object_id"
-fi
-
-if [ -f "$__object/parameter/password" ]
-then
-    password="$( cat "$__object/parameter/password" )"
-else
-    password=''
-fi
-
-host="$( cat "$__object/parameter/host" )"
-
-check_user="$( mysql -B -N -e "select user from mysql.user where user = '$name' and host = '$host'" )"
-
-if [ -n "$check_user" ]
-then
-    if [ -n "$password" ]
-    then
-        check_password="$( mysql -B -N -e "select user from mysql.user where user = '$name' and host = '$host' and password = password( '$password' )" )"
-    fi
-
-    if [ -n "$password" ] && [ -z "$check_password" ]
-    then
-        echo 'change-password'
-    else
-        echo 'present'
-    fi
-else
-    echo 'absent'
-fi

cdist/conf/type/__mysql_user/gencode-remote

@@ -1,68 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Ander Punnar (ander-at-kvlt-dot-ee)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-state_is="$( cat "$__object/explorer/state" )"
-
-state_should="$( cat "$__object/parameter/state" )"
-
-if [ "$state_is" = "$state_should" ]
-then
-    exit 0
-fi
-
-if [ -f "$__object/parameter/name" ]
-then
-    name="$( cat "$__object/parameter/name" )"
-else
-    name="$__object_id"
-fi
-
-host="$( cat "$__object/parameter/host" )"
-
-if [ -f "$__object/parameter/password" ]
-then
-    password="$( cat "$__object/parameter/password" )"
-else
-    if [ "$state_should" = 'present' ]
-    then
-        echo '--password needed' >&2
-        exit 1
-    else
-        password=''
-    fi
-fi
-
-if [ "$state_is" = 'absent' ] && [ "$state_should" = 'present' ]
-then
-    echo "mysql -e 'create user \`$name\`@\`$host\` identified by \"$password\"'"
-    echo "create user $name@$host" >> "$__messages_out"
-
-elif [ "$state_is" != 'absent' ] && [ "$state_should" = 'absent' ]
-then
-    echo "mysql -e 'drop user \`$name\`@\`$host\`'"
-    echo "drop user $name@$host" >> "$__messages_out"
-
-elif [ "$state_is" = 'change-password' ]
-then
-    # this only works with MySQL 5.7.6 and later or MariaDB 10.1.20 and later
-    echo "mysql -e 'alter user \`$name\`@\`$host\` identified by \"$password\"'"
-    echo "mysql -e 'flush privileges'"
-    echo "change password $name@$host" >> "$__messages_out"
-fi

cdist/conf/type/__mysql_user/man.rst

@@ -1,48 +0,0 @@
-cdist-type__mysql_user(7)
-=========================
-
-NAME
-----
-cdist-type__mysql_user - Manage a MySQL user
-
-
-DESCRIPTION
------------
-
-Create MySQL user or change password for the user.
-
-
-OPTIONAL PARAMETERS
--------------------
-name
-   Name of user. Defaults to object id.
-
-host
-   Host of user. Defaults to localhost.
-
-password
-   Password of user.
-
-state
-   Defaults to present.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    __mysql_user user --password secret
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2020 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option) any
-later version.

cdist/conf/type/__mysql_user/parameter/default/host

@@ -1 +0,0 @@
-localhost

cdist/conf/type/__mysql_user/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__mysql_user/parameter/optional

@@ -1,4 +0,0 @@
-name
-host
-password
-state

cdist/conf/type/__package_apt/gencode-remote

@@ -74,14 +74,6 @@ fi
 
 case "$state_should" in
     present)
-        # following is bit ugly, but important hack.
-        # due to how cdist config run works, there isn't
-        # currently better way to do it :(
-        cat << EOF
-if [ ! -f /var/cache/apt/pkgcache.bin ] || [ "\$( stat --format %Y /var/cache/apt/pkgcache.bin )" -lt "\$( date +%s -d '-1 day' )" ]
-then echo apt-get update > /dev/null 2>&1 || true
-fi
-EOF
         if [ -n "$version" ]; then
             name="${name}=${version}"
         fi

cdist/conf/type/__package_apt/man.rst

@@ -11,9 +11,6 @@ DESCRIPTION
 apt-get is usually used on Debian and variants (like Ubuntu) to
 manage packages.
 
-This type will also update package index, if it is older
-than one day, to avoid missing package error messages.
-
 
 REQUIRED PARAMETERS
 -------------------

cdist/conf/type/__postgres_database/gencode-remote

@@ -43,14 +43,10 @@ if [ "$state_should" != "$state_is" ]; then
          if [ -f "$__object/parameter/owner" ]; then
             owner="-O \"$(cat "$__object/parameter/owner")\""
          fi
-         cat << EOF
+         echo "su - '$postgres_user' -c \"createdb $owner \"$name\"\""
-su - '$postgres_user' -c "createdb $owner \"$name\""
-EOF
       ;;
       absent)
-         cat << EOF
+         echo "su - '$postgres_user' -c \"dropdb \"$name\"\""
-su - '$postgres_user' -c "dropdb \"$name\""
-EOF
       ;;
    esac
 fi

cdist/conf/type/__postgres_role/gencode-remote

@@ -53,13 +53,11 @@ case "$state_should" in
         done
 
         [ -n "$password" ] && password="PASSWORD '$password'"
-        cat << EOF
+
-su - '$postgres_user' -c "psql postgres -wc \"CREATE ROLE \\\\\"$name\\\\\" WITH $password $booleans;\""
+        cmd="CREATE ROLE \"$name\" WITH $password $booleans"
-EOF
+        echo "su - '$postgres_user' -c \"psql postgres -wc \\\"$cmd\\\"\""
     ;;
     absent)
-        cat << EOF
+        echo "su - '$postgres_user' -c \"dropuser \\\"$name\\\"\""
-su - '$postgres_user' -c "dropuser \"$name\""
-EOF
     ;;
 esac

cdist/conf/type/__service/explorer/service-manager

@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# Assume systemd if systemctl is in PATH.
-if [ "$(command -v systemctl)" ]; then
-	printf "systemd"
-else
-	printf "unknown"
-fi

cdist/conf/type/__service/gencode-remote

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-manager="$(cat "$__object/explorer/service-manager")"
-name=$__object_id
-action="$(cat "$__object/parameter/action")"
-
-if [ "$manager" = "unknown" ]; then
-	echo "service '$name' '$action'"
-fi

cdist/conf/type/__service/man.rst

@@ -1,51 +0,0 @@
-cdist-type__service(7)
-======================
-
-NAME
-----
-cdist-type__service - Run action on a system service
-
-
-DESCRIPTION
------------
-This type allows you to run an action against a system service.
-
-
-REQUIRED PARAMETERS
--------------------
-action
-  Arbitrary parameter passed as action. Usually 'start', 'stop', 'reload' or 'restart'.
-
-OPTIONAL PARAMETERS
--------------------
-None.
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Restart nginx service.
-    __service nginx --action restart
-
-    # Stop postfix service.
-    __service postfix --action stop
-
-
-AUTHORS
--------
-Timothée Floure <timothee.floure@ungleich.ch>
-
-
-COPYING
--------
-Copyright \(C) 2019 Timothée Floure. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__service/manifest

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-manager="$(cat "$__object/explorer/service-manager")"
-
-name=$__object_id
-action="$(cat "$__object/parameter/action")"
-
-case "$manager" in
-	systemd)
-		__systemd_service "$name" --action "$action"
-	;;
-	*)
-		# Unknown: handled by `service $NAME $action` in gencode-remote.
-	;;
-esac

cdist/conf/type/__service/parameter/required

@@ -1 +0,0 @@
-action

cdist/conf/type/__systemd_service/explorer/state

@@ -1,43 +0,0 @@
-#!/bin/sh -e
-# explorer/state
-#
-# 2020 Matthias Stecher <matthiasstecher at gmx.de>
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# Check if the service is running or stopped.
-#
-# The explorer must check before if the service exist, because 'systemctl is-active'
-# will return "inactive" even if there is no service there:
-#   systemctl cat foo        # does not exist
-#   systemctl is-active foo  # is "inactive"
-
-
-# get name of the service
-if [ -f "$__object/parameter/name" ]; then
-    name="$(cat "$__object/parameter/name")"
-else
-    name="$__object_id"
-fi
-
-
-# check if the service exist, else exit without output (also if systemd doesn't exist)
-# do not exit here with an error code, will be done in the gencode-remote script
-systemctl cat "$name" > /dev/null 2>&1 || exit 0
-
-# print if the service is running or not
-systemctl is-active -q "$name" && printf "running" || printf "stopped"

cdist/conf/type/__systemd_service/gencode-remote

@@ -1,98 +0,0 @@
-#!/bin/sh -e
-# gencode-remote
-#
-# 2020 Matthias Stecher <matthiasstecher at gmx.de>
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# Checks the given state of the service and set it to the given
-# state. Optionally, it executes the action if service running.
-
-
-# get name of the service
-name="$__object/parameter/name"
-if [ -f "$name" ]; then
-    name="$(cat "$name")"
-else
-    name="$__object_id"
-fi
-
-
-# read current status and parameters
-state="$(cat "$__object/explorer/state")"
-should="$(cat "$__object/parameter/state")"
-
-# if systemd/service does not exist
-if [ -z "$state" ]; then
-    printf "systemd or service '%s' does not exist!\n" "$name" >&2
-    exit 1
-fi
-
-
-# save the action required
-required_action=""
-
-# check the state of the service that should be
-if [ "$state" != "$should" ]; then
-    # select what to do to get the $should state
-    case "$should" in
-        running)
-            if [ "$state" = "stopped" ]; then required_action="start"; fi
-            ;;
-
-        stopped)
-            if [ "$state" = "running" ]; then required_action="stop"; fi
-            ;;
-    esac
-fi
-
-# check if the action can be achieved if given
-if [ -f "$__object/parameter/action" ] \
-    && [ -z "$required_action" ] && [ "$state" = "running" ]; then
-
-    # there must be an action
-    action="$(cat "$__object/parameter/action")"
-
-    # select the action to the required element
-    case "$action" in
-        restart)
-            required_action="restart"
-            ;;
-
-        reload)
-            required_action="reload"
-            ;;
-
-        *)
-            printf "action '%s' does not exist!" "$action" >&2
-            exit 2
-    esac
-
-    # Make a special check: only do this action if a dependency did something
-    # it is required that the dependencies write there action to $__messages_in
-    if [ -f "$__object/parameter/if-required" ]; then
-        # exit here if there are no changes from the dependencies affected (nothing to do)
-        if ! grep -q -f "$__object/require" "$__messages_in"; then exit 0; fi
-    fi
-fi
-
-# print the execution command if a action given
-if [ -n "$required_action" ]; then
-    # also print it as message
-    echo "$required_action" >> "$__messages_out"
-    echo "systemctl $required_action '$name'"
-fi

cdist/conf/type/__systemd_service/man.rst

@@ -1,110 +0,0 @@
-cdist-type__systemd-service(7)
-==============================
-
-NAME
-----
-cdist-type__systemd-service - Controls a systemd service state
-
-DESCRIPTION
------------
-This type controls systemd services to define a state of the service,
-or an action like reloading or restarting. It is useful to reload a
-service after configuration applied or shutdown one service.
-
-The activation or deactivation is out of scope. Look for the
-:strong:`cdist-type__systemd_util`\ (7) type instead.
-
-REQUIRED PARAMETERS
--------------------
-
-None.
-
-OPTIONAL PARAMETERS
--------------------
-
-name
-    String which will used as name instead of the object id.
-
-state
-    The state which the service should be in:
-
-    running
-        Service should run (default)
-
-    stoppend
-        Service should stopped
-
-action
-    Executes an action on on the service. It will only execute it if the
-    service keeps the state **running**. There are following actions, where:
-
-    reload
-        Reloads the service
-
-    restart
-        Restarts the service
-
-BOOLEAN PARAMETERS
-------------------
-
-if-required
-    Only execute the action if minimum one required type outputs a message to
-    **$__messages_out**. Through this, the action should only executed if a
-    dependency did something. The action will not executed if no dependencies
-    given.
-
-MESSAGES
---------
-
-start
-    Started the service
-
-stop
-    Stopped the service
-
-restart
-    Restarted the service
-
-reload
-    Reloaded the service
-
-ABORTS
-------
-Aborts in following cases:
-
-systemd or the service does not exist
-
-EXAMPLES
---------
-.. code-block:: sh
-
-    # service must run
-    __systemd_service nginx
-
-    # service must stopped
-    __systemd_service sshd \
-        --state stopped
-
-    # restart the service
-    __systemd_service apache2 \
-        --action restart
-
-    # makes sure the service exist with an alternative name
-    __systemd_service foo \
-        --name sshd
-
-    # reload the service for a modified configuration file
-    # only reloads the service if the file really changed
-    require="__config_file/etc/foo.conf" __systemd_service foo \
-        --action reload --if-required
-
-AUTHORS
--------
-Matthias Stecher <matthiasstecher at gmx.de>
-
-COPYRIGHT
----------
-Copyright \(C) 2020 Matthias Stecher. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__systemd_service/parameter/boolean

@@ -1 +0,0 @@
-if-required

cdist/conf/type/__systemd_service/parameter/default/state

@@ -1 +0,0 @@
-running

cdist/conf/type/__systemd_service/parameter/optional

@@ -1,3 +0,0 @@
-name
-state
-action

cdist/conf/type/__update_alternatives/explorer/state

@@ -1,8 +0,0 @@
-#!/bin/sh -e
-path="$(cat "$__object/parameter/path")"
-name="$__object_id"
-link="$(readlink "/etc/alternatives/$name")"
-if [ "$path" = "$link" ]
-then echo present
-else echo absent
-fi

cdist/conf/type/__update_alternatives/gencode-remote

@@ -17,10 +17,9 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
-
+#
-if [ "$(cat "$__object/explorer/state")" = 'present' ]
+# Setup alternative - no standard way to create, always set
-then exit 0
+#
-fi
 
 path="$(cat "$__object/parameter/path")"
 name="$__object_id"

cdist/conf/type/__user/explorer/shadow

@@ -24,7 +24,7 @@
 name=$__object_id
 
 case $("$__explorer/os") in
-  'freebsd'|'netbsd'|'openbsd'|'alpine')
+  'freebsd'|'netbsd'|'openbsd')
     database='passwd'
     ;;
   # Default to using shadow passwords

cdist/exec/util.py

@@ -24,7 +24,6 @@ import os
 from tempfile import TemporaryFile
 
 import cdist
-import cdist.configuration
 
 
 # IMPORTANT:
@@ -201,9 +200,3 @@ def resolve_conf_dirs(configuration, add_conf_dirs):
         conf_dirs.extend(add_conf_dirs)
     conf_dirs = set(conf_dirs)
     return conf_dirs
-
-
-def resolve_conf_dirs_from_config_and_args(args):
-    cfg = cdist.configuration.Configuration(args)
-    configuration = cfg.get_config(section='GLOBAL')
-    return resolve_conf_dirs(configuration, args.conf_dir)

cdist/info.py

@@ -53,7 +53,10 @@ class Info(object):
 
     @classmethod
     def commandline(cls, args):
-        conf_dirs = util.resolve_conf_dirs_from_config_and_args(args)
+        cfg = cdist.configuration.Configuration(args)
+        configuration = cfg.get_config(section='GLOBAL')
+        conf_dirs = util.resolve_conf_dirs(configuration,
+                                           args.conf_dir)
         c = cls(conf_dirs, args)
         c.run()
 
@@ -167,8 +170,7 @@ class Info(object):
 
     def run(self):
         rv = []
-        for cp in self.conf_dirs:
+        for conf_path in self.conf_dirs:
-            conf_path = os.path.expanduser(cp)
             if self.all or self.display_global_explorers:
                 rv.extend((x, 'E', ) for x in self._get_global_explorers(
                     conf_path))

cdist/preos.py

@@ -5,9 +5,8 @@ import inspect
 import argparse
 import cdist
 import logging
+import re
 import cdist.argparse
-import cdist.configuration
-import cdist.exec.util as util
 
 
 _PREOS_CALL = "commandline"
@@ -25,6 +24,16 @@ def extend_plugins_path(dirs):
             _PLUGINS_PATH.append(preos_dir)
 
 
+cdist_home = cdist.home_dir()
+if cdist_home:
+    extend_plugins_path((cdist_home, ))
+x = 'CDIST_PATH'
+if x in os.environ:
+    vals = re.split(r'(?<!\\):', os.environ[x])
+    vals = [x for x in vals if x]
+    extend_plugins_path(vals)
+
+
 def preos_plugin(obj):
     """It is preos if _PREOS_MARKER is True and has _PREOS_CALL."""
     if hasattr(obj, _PREOS_MARKER):
@@ -93,9 +102,6 @@ class PreOS(object):
                             help=('Add configuration directory (one that '
                                   'contains "preos" subdirectory)'),
                             action='append')
-        parser.add_argument('-g', '--config-file',
-                            help='Use specified custom configuration file.',
-                            dest="config_file", required=False)
         parser.add_argument('-L', '--list-preoses',
                             help='List available PreOS-es',
                             action='store_true', default=False)
@@ -104,9 +110,8 @@ class PreOS(object):
         cdist.argparse.handle_loglevel(args)
         log.debug("preos args : {}".format(args))
 
-        conf_dirs = util.resolve_conf_dirs_from_config_and_args(args)
+        if args.conf_dir:
-
+            extend_plugins_path(args.conf_dir)
-        extend_plugins_path(conf_dirs)
         sys.path.extend(_PLUGINS_PATH)
         cls.preoses = find_preoses()
 

docs/changelog

@@ -2,49 +2,9 @@ Changelog
 ---------
 
 next:
-	* Type __user: Fix missing shadow for alpine (llnu)
-
-6.5.2: 2020-02-27
-	* Type __update_alternatives: Add state explorer (Ander Punnar)
-	* Explorer os_version: Add support for Alpine Linux (Jin-Guk Kwon)
-	* Explorer init: Rewrite and support more init systems (Dennis Camera)
-	* New type: __service (Timothée Floure)
-	* Types __consul_*: Add optional parameter for using distribution packages (Timothée Floure)
-	* Explorer disks: Fix NetBSD, support Linux w/o lsblk (Dennis Camera)
-	* Type __directory: Add 'exists' and 'pre-exists' states (Dennis Camera)
-	* Type __file: Improve error messages for pre-exists state (Dennis Camera)
-
-6.5.1: 2020-02-15
-	* Type __consul_agent: Add Debian 10 support (Nico Schottelius)
-	* Explorer os_release: Add fallbacks (Dennis Camera)
-	* Types __file, __directory: Add fallback for systems without stat (Dennis Camera)
-	* Type __mysql_privileges: Fix quoting (Ander Punnar)
-	* Type __package_apt: Update package index if it is older than one day (Ander Punnar)
-	* Type __cron: Fix job removal if 'is' and 'should' don't match (Matthias Stecher)
-	* New type: __systemd_service (Matthias Stecher)
-	* Type __postgres_role: Fix password command syntax (Timothée Floure)
-
-6.5.0: 2020-01-23
-	* Type __acl: Add --entry parameter to replace --acl, deprecate --acl (Ander Punnar)
-	* Core: preos: Fix missing configuration file usage, support -g, --config-file option (Darko Poljak)
-	* Core info command: Support tilde expansion of conf directories (Darko Poljak)
-	* Types __postgres_*: Fix edge cases in quoted identifiers (Timothée Floure)
-	* New type: __apt_unattended_upgrades (Ander Punnar)
-	* Type __line: Bugfixes: (Dennis Camera)
-		- ensure the line is only added once
-		- always add line to end if anchor is not found
-		- match line at the beginning when not regex
-		- fix incorrect 'wrongposition' in state explorer
-		- produce error when file does not exist
-	* Type __acl: Add --source, --file and --directory parameters (Ander Punnar)
-
-6.4.0: 2020-01-04
 	* Type __consul_agent: Don't deploy init script on Alpine anymore, it ships with one itself (Nico Schottelius)
 	* Type __install_chroot_umount: Bugfix: type was not using __chroot_umount/manifest (Steven Armstrong)
 	* Types __postgres_*: Use double quoted identifiers in generated SQL (Timothée Floure)
-	* Core: Add cdist info command (Darko Poljak)
-	* New types: __mysql_user, __mysql_privileges (Ander Punnar)
-	* Type __mysql_database: Rewrite (Ander Punnar)
 
 6.3.0: 2019-12-12
 	* Type __package_update_index: Fix Alpine part (Dominique Roux)

docs/src/conf.py

@@ -56,7 +56,7 @@ master_doc = 'index'
 
 # General information about the project.
 project = 'cdist'
-copyright = 'ungleich GmbH 2020'
+copyright = 'ungleich GmbH 2019'
 # author = 'Darko Poljak'
 
 # The version info for the project you're documenting, acts as replacement for

docs/src/index.rst

@@ -4,7 +4,6 @@ cdist - usable configuration management
 cdist is a usable configuration management system.
 It adheres to the KISS principle and 
 is being used in small up to enterprise grade environments.
-It natively supports IPv6 since the first release.
 
 
 .. toctree::

docs/src/man1/cdist.rst

@@ -59,9 +59,7 @@ SYNOPSIS
                          [-I INVENTORY_DIR] [-a] [-f HOSTFILE] [-H] [-t]
                          [host [host ...]]
 
-    cdist preos [-h] [-l LOGLEVEL] [-q] [-v] [-c CONF_DIR] [-g CONFIG_FILE]
+    cdist preos [-h] [-l LOGLEVEL] [-q] [-v] [-c CONF_DIR] [-L] [preos] ...
-                [-L]
-                [preos] ...
 
     cdist preos [preos-options] debian [-h] [-l LOGLEVEL] [-q] [-v] [-b] [-a ARCH] [-B]
                                        [-C] [-c CDIST_PARAMS] [-D DRIVE] [-e REMOTE_EXEC]
@@ -86,7 +84,7 @@ SYNOPSIS
 
     cdist shell [-h] [-l LOGLEVEL] [-q] [-v] [-s SHELL]
 
-    cdist info [-h] [-a] [-c CONF_DIR] [-e] [-F] [-f] [-g CONFIG_FILE] [-t] [pattern]
+    cdist info [-h] [-a] [-c CONF_DIR] [-e] [-F] [-f] [-t] [pattern]
 
 
 DESCRIPTION
@@ -466,9 +464,6 @@ Create PreOS.
 **-c CONF_DIR, --conf-dir CONF_DIR**
     Add configuration directory (one that contains "preos" subdirectory).
 
-**-g CONFIG_FILE, --config-file CONFIG_FILE**
-    Use specified custom configuration file.
-
 **-L, --list-preoses**
     List available PreOS-es.