title: Announcing IPv6 networks without becoming the default router --- pub_date: 2020-01-31 --- author: ungleich network team --- twitter_handle: ungleich --- _hidden: no --- _discoverable: yes --- abstract: You can also announce prefixes without becoming the default router --- body: ## TL;DR Use **AdvDefaultLifetime 0** in your radvd.conf if you don't want the router to become a default router. ## Background Sometimes you have multiple routers in a network and you don't want a router to become the default router for clients, but it should still announce an IPv6 prefix. ## radvd Luckily radvd supports an option to notify the clients of this. From the manpage of radvd.conf(5): ``` AdvDefaultLifetime seconds The lifetime associated with the default router in units of seconds. The maximum value corresponds to 18.2 hours. A lifetime of 0 indicates that the router is not a default router and should not appear on the default router list. The router lifetime applies only to the router's usefulness as a default router; it does not apply to information contained in other message fields or options. Options that need time limits for their infor‐ mation include their own lifetime fields. Must be either zero or between MaxRtrAdvInterval and 9000 seconds. Default: 3 * MaxRtrAdvInterval (Minimum 1 second). ``` ## Sample configuration A configuration from one of our test sites looks as follows: ``` interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 5; AdvDefaultLifetime 0; prefix 2a0a:e5c1:111:10c::/64 { }; }; ``` Client in this test network assign themselves an additional IPv6 address from this prefix. ## Note While clients won't select this router as the default router, they might still choose to use an IPv6 address from this prefix as their **source address**. More details about it can be found in the [RFC 6724](https://tools.ietf.org/html/rfc6724).