__ini_value: fix use of removed constant

_param was removed in preference of the param functions.

cdist/conf/type/__apt_pin/manifest

@@ -57,11 +57,6 @@ __file "/etc/apt/preferences.d/$name" \
     --owner root --group root --mode 0644 \
     --state "$state" \
     --source - << EOF
-# Created by cdist ${__type##*/}
-# Do not change. Changes will be overwritten.
-#
-
-# $name
 Package: $package
 Pin: $pin
 Pin-Priority: $priority

cdist/conf/type/__apt_pin/parameter/default/priority

@@ -1 +0,0 @@
-500

cdist/conf/type/__apt_pin/parameter/optional

@@ -1,3 +1,2 @@
 state
 package
-priority

cdist/conf/type/__apt_pin/parameter/required

@@ -1 +1,2 @@
 distribution
+priority

cdist/conf/type/__apt_source/gencode-remote

@@ -22,21 +22,7 @@
 name="$__object_id"
 destination="/etc/apt/sources.list.d/${name}.list"
 
-# There are special arguments to apt(8) to prevent aborts if apt woudn't been
-# updated after the 19th April 2021 till the bullseye release. The additional
-# arguments acknoledge the happend suite change (the apt(8) update does the
-# same by itself).
-#
-# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-# allows backward compatablility to pre-buster Debian versions.
-#
-# See more: ticket #861
-# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
-# run 'apt-get update' only if something changed with our sources.list file
-#   it will be run a second time on error as a redundancy messure to success
 if grep -q "^__file${destination}" "$__messages_in"; then
-   printf 'apt-get %s update || apt-get %s update\n' "$apt_opts" "$apt_opts"
+   printf 'apt-get update || apt-get update\n'
 fi
 

cdist/conf/type/__apt_update_index/gencode-remote

@@ -18,23 +18,9 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-
-# There are special arguments to apt(8) to prevent aborts if apt woudn't been
-# updated after the 19th April 2021 till the bullseye release. The additional
-# arguments acknoledge the happend suite change (the apt(8) update does the
-# same by itself).
-#
-# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-# allows backward compatablility to pre-buster Debian versions.
-#
-# See more: ticket #861
-# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
 # run 'apt-get update' if anything in /etc/apt is newer then /var/lib/apt/lists
-#   it will be run a second time on error as a redundancy messure to success
 cat << DONE
 if find /etc/apt -mindepth 1 -cnewer /var/lib/apt/lists | grep . > /dev/null; then
-   apt-get $apt_opts update || apt-get $apt_opts update
+   apt-get update || apt-get update
 fi
 DONE

cdist/conf/type/__debconf_set_selections/parameter/deprecated/file

@@ -1 +0,0 @@
-'file' has been deprecated in favour of 'line' in order to provide idempotency.

cdist/conf/type/__file/gencode-local

@@ -1,7 +1,7 @@
 #!/bin/sh -e
 #
 # 2011-2012 Nico Schottelius (nico-cdist at schottelius.org)
-# 2013-2022 Steven Armstrong (steven-cdist armstrong.cc)
+# 2013 Steven Armstrong (steven-cdist armstrong.cc)
 #
 # This file is part of cdist.
 #
@@ -89,26 +89,10 @@ if [ "$state_should" = "present" ] || [ "$state_should" = "exists" ]; then
       touch "$__object/files/set-attributes"
 
       # upload file to temp location
-      upload_destination="$(mktemp -u "${destination}.cdist.XXXXXXXXXX")"
+      tempfile_template="${destination}.cdist.XXXXXXXXXX"
-      # Yes, we are aware that this is a race condition.
-      # However:
-      # a) cdist usually writes to directories that are not user writable
-      #    (probably > 99.9%)
-      # b) if they are user owned, the user / attacker always wins
-      #    (probably < 0.1%)
-      # c) the only case which we could improve are tmp directories and we
-      #    don't think managing tmp directories with cdist is a typical case
-      #    ("the rest %)"
       cat << DONE
-$__remote_exec $__target_host test -e $upload_destination && {
+destination_upload="\$($__remote_exec $__target_host "mktemp $tempfile_template")"
-   echo "Refusing to upload file to existing destination: $upload_destination" >&2
-   exit 1
-}
 DONE
-      # Tell gencode-remote to where we uploaded the file so it can move
-      # it to its final destination.
-      echo "$upload_destination" > "$__object/files/upload-destination"
-
       if [ "$upload_file" ]; then
          echo upload >> "$__messages_out"
          # IPv6 fix
@@ -119,8 +103,12 @@ DONE
              my_target_host="${__target_host}"
          fi
          cat << DONE
-$__remote_copy "$source" "${my_target_host}:${upload_destination}"
+$__remote_copy "$source" "${my_target_host}:\$destination_upload"
+DONE
+      fi
+# move uploaded file into place
+cat << DONE
+$__remote_exec $__target_host "rm -rf \"$destination\"; mv \"\$destination_upload\" \"$destination\""
 DONE
    fi
 fi
-fi

cdist/conf/type/__file/gencode-remote

@@ -1,7 +1,7 @@
 #!/bin/sh -e
 #
 # 2011-2013 Nico Schottelius (nico-cdist at schottelius.org)
-# 2013-2022 Steven Armstrong (steven-cdist armstrong.cc)
+# 2013 Steven Armstrong (steven-cdist armstrong.cc)
 #
 # This file is part of cdist.
 #
@@ -62,13 +62,6 @@ set_mode() {
 
 case "$state_should" in
     present|exists)
-        if [ -f "$__object/files/upload-destination" ]; then
-            final_destination="$destination"
-            # We change the 'global' $destination variable here so we can
-            # change attributes of the new/uploaded file before moving it
-            # to it's final destination.
-            destination="$(cat "$__object/files/upload-destination")"
-        fi
         # Note: Mode - needs to happen last as a chown/chgrp can alter mode by
         #  clearing S_ISUID and S_ISGID bits (see chown(2))
         for attribute in group owner mode; do
@@ -88,11 +81,6 @@ case "$state_should" in
                 fi
             fi
         done
-        if [ -f "$__object/files/upload-destination" ]; then
-            # move uploaded file into place
-            printf 'rm -rf "%s"\n' "$final_destination"
-            printf 'mv -T "%s" "%s"\n' "$destination" "$final_destination"
-        fi
         if [ -f "$__object/files/set-attributes" ]; then
             # set-attributes is created if file is created or uploaded in gencode-local
             fire_onchange=1

cdist/conf/type/__grafana_dashboard/manifest

@@ -15,7 +15,7 @@ case $os in
                 # Differntation not needed anymore
                 apt_source_distribution=stable
                 ;;
-            10*|11*)
+            10*)
                 # Differntation not needed anymore
                 apt_source_distribution=stable
                 ;;

cdist/conf/type/__haproxy_dualstack/files/http

@@ -1,8 +0,0 @@
-frontend http
-	bind	BIND@:80
-	mode	http
-	option	httplog
-	default_backend	http
-
-backend http
-	mode	http

cdist/conf/type/__haproxy_dualstack/files/https

@@ -1,10 +0,0 @@
-frontend https
-	bind	BIND@:443
-	mode	tcp
-	option	tcplog
-	tcp-request	inspect-delay 5s
-	tcp-request	content accept if { req_ssl_hello_type 1 }
-	default_backend	https
-
-backend https
-	mode	tcp

cdist/conf/type/__haproxy_dualstack/files/imaps

@@ -1,12 +0,0 @@
-frontend imaps
-	bind	BIND@:143
-	bind	BIND@:993
-
-	mode	tcp
-	option	tcplog
-	tcp-request	inspect-delay 5s
-	tcp-request	content accept if { req_ssl_hello_type 1 }
-	default_backend	imaps
-
-backend imaps
-	mode	tcp

cdist/conf/type/__haproxy_dualstack/files/smtps

@@ -1,12 +0,0 @@
-frontend smtps
-	bind	BIND@:25
-	bind	BIND@:465
-
-	mode	tcp
-	option	tcplog
-	tcp-request	inspect-delay 5s
-	tcp-request	content accept if { req_ssl_hello_type 1 }
-	default_backend	smtps
-
-backend smtps
-	mode	tcp

cdist/conf/type/__haproxy_dualstack/man.rst

@@ -1,121 +0,0 @@
-cdist-type__haproxy_dualstack(7)
-================================
-
-
-NAME
-----
-cdist-type__haproxy_dualstack - Proxy services from a dual-stack server
-
-
-DESCRIPTION
------------
-This (singleton) type installs and configures haproxy to act as a dual-stack
-proxy for single-stack services.
-
-This can be useful to add IPv4 support to IPv6-only services while only using
-one IPv4 for many such services.
-
-By default this type uses the plain TCP proxy mode, which means that there is no
-need for TLS termination on this host when SNI is supported.
-This also means that proxied services will not receive the client's IP address,
-but will see the proxy's IP address instead (that of `$__target_host`).
-
-This can be solved by using the PROXY protocol, but do take into account that,
-e.g. nginx cannot serve both regular HTTP(S) and PROXY protocols on the same
-port, so you will need to use other ports for that.
-
-As a recommendation in this type: use TCP ports 8080 and 591 respectively to
-serve HTTP and HTTPS using the PROXY protocol.
-
-See the EXAMPLES for more details.
-
-
-OPTIONAL PARAMETERS
--------------------
-v4proxy
-    Proxy incoming IPv4 connections to the equivalent IPv6 endpoint.
-    In its simplest use, it must be a NAME with an `AAAA` DNS entry, which is
-    the IP address actually providing the proxied services.
-    The full format of this argument is:
-    `[proxy:]NAME[[:PROTOCOL_1=PORT_1]...[:PROTOCOL_N=PORT_N]]`
-    Where starting with `proxy:` determines that the PROXY protocol must be
-    used and each `:PROTOCOL=PORT` (e.g. `:http=8080` or `:https=591`) is a PORT
-    override for the given PROTOCOL (see `--protocol`), if not present the
-    PROTOCOL's default port will be used.
-
-
-v6proxy
-    Proxy incoming IPv6 connections to the equivalent IPv4 endpoint.
-    In its simplest use, it must be a NAME with an `A` DNS entry, which is
-    the IP address actually providing the proxied services.
-    See `--v4proxy` for more options and details.
-
-protocol
-    Can be passed multiple times or as a space-separated list of protocols.
-    Currently supported protocols are: `http`, `https`, `imaps`, `smtps`.
-    This defaults to: `http https imaps smtps`.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Proxy the IPv6-only services so IPv4-only clients can access them
-    # This uses HAProxy's TCP mode for http, https, imaps and smtps
-    __haproxy_dualstack \
-        --v4proxy ipv6.chat \
-        --v4proxy matrix.ungleich.ch
-
-    # Proxy the IPv6-only HTTP(S) services so IPv4-only clients can access them
-    # Note this means that the backend IPv6-only server will only see
-    # the IPv6 address of the haproxy host managed by cdist, which can be
-    # troublesome if this information is relevant for analytics/security/...
-    # See the PROXY example below
-    __haproxy_dualstack \
-        --protocol http --protocol https \
-        --v4proxy ipv6.chat \
-        --v4proxy matrix.ungleich.ch
-
-    # Use the PROXY protocol to proxy the IPv6-only HTTP(S) services enabling
-    # IPv4-only clients to access them while maintaining the client's IP address
-    __haproxy_dualstack \
-        --protocol http --protocol https \
-        --v4proxy proxy:ipv6.chat:http=8080:https=591 \
-        --v4proxy proxy:matrix.ungleich.ch:http=8080:https=591
-    # Note however that the PROXY protocol is not compatible with regular
-    # HTTP(S) protocols, so your nginx will have to listen on different ports
-    # with the PROXY settings.
-    # Note that you will need to restrict access to the 8080 port to prevent
-    # Client IP spoofing.
-    # This can be something like:
-    # server {
-    #     # listen for regular HTTP connections
-    #     listen [::]:80 default_server;
-    #     listen 80 default_server;
-    #     # listen for PROXY HTTP connections
-    #     listen [::]:8080 proxy_protocol;
-    #     # Accept the Client's IP from the PROXY protocol
-    #     real_ip_header proxy_protocol;
-    # }
-
-
-SEE ALSO
---------
-- https://www.haproxy.com/blog/enhanced-ssl-load-balancing-with-server-name-indication-sni-tls-extension/
-- https://www.haproxy.com/blog/haproxy/proxy-protocol/
-- https://docs.nginx.com/nginx/admin-guide/load-balancer/using-proxy-protocol/
-
-
-AUTHORS
--------
-ungleich <foss--@--ungleich.ch>
-Evilham <cvs--@--evilham.com>
-
-
-COPYING
--------
-Copyright \(C) 2021 ungleich glarus ag. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__haproxy_dualstack/manifest

@@ -1,155 +0,0 @@
-#!/bin/sh -eu
-
-__package haproxy
-require="__package/haproxy" __start_on_boot haproxy
-
-tmpdir="$__object/files"
-mkdir "$tmpdir"
-configtmp="$__object/files/haproxy.cfg"
-
-os=$(cat "$__global/explorer/os")
-case $os in
-	freebsd)
-		CONFIG_FILE="/usr/local/etc/haproxy.conf"
-		cat <<EOF > "$configtmp"
-global
-	maxconn	4000
-	user	nobody
-	group	nogroup
-	daemon
-
-EOF
-
-		;;
-	*)
-		CONFIG_FILE="/etc/haproxy/haproxy.cfg"
-		cat <<EOF > "$configtmp"
-global
-	log	[::1] local2
-	chroot	/var/lib/haproxy
-	pidfile	/var/run/haproxy.pid
-	maxconn	4000
-	user	haproxy
-	group	haproxy
-	daemon
-
-	# turn on stats unix socket
-	stats socket	/var/lib/haproxy/stats
-
-EOF
-		;;
-esac
-
-cat <<EOF >> "$configtmp"
-defaults
-	retries	3
-	log	global
-	timeout http-request	10s
-	timeout queue		1m
-	timeout connect		10s
-	timeout client		1m
-	timeout server		1m
-	timeout http-keep-alive	10s
-	timeout check		10s
-EOF
-
-dig_cmd="$(command -v dig || true)"
-get_ip() {
-	# Usage: get_ip (ipv4|ipv6) NAME
-	# uses "dig" if available, else fallback to "host"
-	case $1 in
-		ipv4)
-			if [ -n "${dig_cmd}" ]; then
-				${dig_cmd} +short A "$2"
-			else
-				host -t A "$2" | cut -d ' ' -f 4 | grep -v 'found:'
-			fi
-			;;
-		ipv6)
-			if [ -n "${dig_cmd}" ]; then
-				${dig_cmd} +short AAAA "$2"
-			else
-				host -t AAAA "$2" | cut -d ' ' -f 5 | grep -v 'NXDOMAIN'
-			fi
-			;;
-	esac
-}
-
-PROTOCOLS="$(cat "$__object/parameter/protocol")"
-
-for proxy in v4proxy v6proxy; do
-	param=$__object/parameter/$proxy
-	# no backend? skip generating code
-	if [ ! -f "$param" ]; then
-		continue
-	fi
-
-	# turn backend name into bind parameter: v4backend -> ipv4@
-	bind=$(echo $proxy | sed -e 's/^/ip/' -e 's/proxy//')
-
-	case $bind in
-		ipv4)
-			backendproto=ipv6
-			;;
-		ipv6)
-			backendproto=ipv4
-			;;
-	esac
-
-	for proto in ${PROTOCOLS}; do
-		# Add protocol "header"
-		printf "\n# %s %s \n" "${bind}" "${proto}" >> "$configtmp"
-
-		sed -e "s/BIND/$bind/" \
-			-e "s/\(frontend[[:space:]].*\)/\1$bind/" \
-			-e "s/\(backend[[:space:]].*\)/\\1$bind/" \
-			"$__type/files/$proto" >> "$configtmp"
-
-		while read -r hostdefinition; do
-			if echo "$hostdefinition" | grep -qE '^proxy:'; then
-				# Proxy protocol was requested
-				host="$(echo "$hostdefinition" | sed -E 's/^proxy:([^:]+).*$/\1/')"
-				send_proxy=" send-proxy"
-			else
-				# Just use tcp proxy mode
-				host="$hostdefinition"
-				send_proxy=""
-			fi
-			if echo "$hostdefinition" | grep -qE ":${proto}="; then
-				# Use custom port definition if requested
-				port="$(echo "$hostdefinition" | sed -E "s/^(.*:)?${proto}=([0-9]+).*$/:\2/")"
-			else
-				# Else use the default
-				port=""
-			fi
-			servername=$host
-
-			res=$(get_ip "$bind" "$servername")
-
-			if [ -z "$res" ]; then
-				echo "$servername does not resolve - aborting config" >&2
-				exit 1
-			fi
-
-			# Treat protocols without TLS+SNI specially
-			if [ "$proto" = http ]; then
-				echo "	use-server $servername if { hdr(host) -i $host }" >> "$configtmp"
-			else
-				echo "	use-server $servername if { req_ssl_sni -i $host }" >> "$configtmp"
-			fi
-
-			# Create the "server" itself.
-			# Note that port and send_proxy will be empty unless
-			# they were requested by the type user
-			echo "	server $servername ${backendproto}@${host}${port}${send_proxy}" >> "$configtmp"
-
-		done < "$param"
-	done
-done
-
-# Create config file
-require="__package/haproxy" __file ${CONFIG_FILE} --source "$configtmp" --mode 0644
-
-require="__file${CONFIG_FILE}" __check_messages "haproxy_reload" \
-	--pattern "^__file${CONFIG_FILE}" \
-	--execute "service haproxy reload || service haproxy restart"

cdist/conf/type/__haproxy_dualstack/parameter/default/protocol

@@ -1 +0,0 @@
-http https imaps smtps

cdist/conf/type/__haproxy_dualstack/parameter/optional_multiple

@@ -1,3 +0,0 @@
-protocol
-v4proxy
-v6proxy

cdist/conf/type/__ini_value/explorer/state

@@ -0,0 +1,165 @@
+#!/bin/sh -e
+# __ini_value/explorer/state
+
+# Check the state of the key-value pair in the ini file
+#
+# There are following states:
+#  - present
+#  - wrongvalue
+#  - wrongformat
+#  - commented
+#  - absent
+#  - nosuchfile
+
+# Using ' \t' for matching spaces as char classes not implemented in mawk
+#  see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=65617#40
+
+# Parameters
+# (maybe multi-variable object id for this ..)
+#state_should="$(cat "$__object/parameter/state")"
+file="$(cat "$__object/parameter/file")"
+
+# abort if no file exist
+if ! [ -f "$file" ]; then
+    echo absent
+    exit
+fi
+
+# run awk
+awk -f - "$file" <<'AWK'
+function trim(var) {
+    sub(/^[ \t]*/, "", var)
+    sub(/[ \t]*$/, "", var)
+    return var
+}
+function check_spaces(var) {
+    return match(var, /^[ \t]*$/) == 1
+}
+function state(val) {
+    print val
+    exit
+}
+
+BEGIN {
+    _param = (ENVIRON["__object"] "/parameter/")
+    getline state_should < (_param "state")
+    getline section < (_param "section")
+    getline key < (_param "key")
+    getline delimiter < (_param "delimiter")
+    getline value < (_param "value")
+    getline indentation < (_param "indentation")
+    getline delimiter_space < (_param "delimiter-space")
+
+    do_normalization = (system("test -f " (_param "normalize")) == 0)
+
+    i=0; _comm_param = (_param "comment-sign");
+    while((getline tmp < _comm_param) > 0) {
+        comment_signs[i++] = tmp
+    }
+
+    if(system("test -f " (_param "quote")) == 0) {
+        # quote it now that it only wins checks against quoted values
+        value = ("\"" value "\"")
+    }
+
+    found=0
+    curr_section=""
+    if(section == "")
+        found_section=1
+    else
+        found_section=0
+}
+
+# catch sections
+/^[ \t]*\[.*\][ \t]*$/ {
+    curr_section = trim($0)
+    if(found_section)
+        exit  # game over, section ends
+    if(section == curr_section)
+        found_section=1
+    next
+}
+
+# only interesting if a delimiter was found
+found_section {
+    line = $0
+
+    # index 1 cause of trimmed string
+    if((idel = index(line, delimiter)) && (ikey = index(line, key))) {
+        is_com=0
+        if(ikey > 1) {
+            # maybe comment character or only spaces
+            start_string = substr(line, 1, ikey - 1)
+
+            # something inside rather than a space -> comment
+            if((icom = match(start_string, /[^ \t]+/)) > 0) {
+                # icom = RSTART
+                # only one free-standing char or directly before the key
+                if(RLENGTH == 1 || icom == ikey - 1) {
+                    start_sign = substr(line, RSTART, 1)
+                    for(i in comment_signs) {
+                        if(start_sign == comment_signs[i]) {
+                            is_com = 1; break;
+                        }
+                    }
+                    if(!is_com) next
+                    else {
+                        aftercom_length = ikey - icom - 1
+                        if(!check_spaces(substr(line, icom + 1, aftercom_length))) next
+                        start_spaces = (icom - 1) + aftercom_length
+                    }
+                }
+                else next
+            }
+            # must only contain spaces
+            else start_spaces = ikey - 1
+        }
+
+        idelspace_start = ikey + length(key)
+        idelspace_length = idel - idelspace_start
+        # check for delimiter is only preceded with spaces
+        if(idelspace_length == 0 || check_spaces(substr(line, idelspace_start, idelspace_length))) {
+            found = 1
+
+            # short-circuit on state absent to just delete
+            if(state_should == "absent") state("present");
+
+
+            # extract the value
+            found_value = substr(line, idel + length(delimiter))
+            is_value = trim(found_value)
+
+            # check if value is incorrect
+            if(value != is_value) state("wrongvalue")
+            else {
+                # check if the format is important
+                if(do_normalization) {
+                    if(match(found_value, /^[ \t]+/) == 1) {
+                        found_value = substr(found_value, 1 + RLENGTH)
+                        del_val_spacelen = RLENGTH
+                    }
+                    else
+                        del_val_spacelen = 0
+
+                    # the format must exactly match, else it is incorrect
+                    if(start_spaces != indentation || found_value != is_value ||
+                        idelspace_length != delimiter_space || del_val_spacelen != delimiter_space)
+                        state("wrongformat")
+                }
+
+                if(is_com)
+                    state("commented")
+                else
+                    state("present")
+            }
+            # this will never be reached
+        }
+    }
+}
+
+# in the end, check if it is absent
+END {
+    if(!found)
+        state("absent")
+}
+AWK

cdist/conf/type/__ini_value/files/base.awk

@@ -0,0 +1,138 @@
+BEGIN {
+    bufindex = -1
+    buflen = 0
+    maxbuflen = 10
+
+    # no section means the start to the first section
+    if(section == "") {
+        is_curr_section = 1
+        found_section = 1
+    }
+}
+
+# controls the line buffer
+function flush_buffer() {
+    while(buflen > 0)
+        _pop_line()
+}
+function flush_lines(n) {
+    while(buflen > 0 && n-- > 0)
+        _pop_line()
+}
+function push_line() {
+    linebuf[++bufindex] = $0
+    buflen++
+    while(buflen > maxbuflen) _pop_line()
+}
+function revert_line() {
+    # no delete, because it will be overwritten by the next line if any ..
+    bufindex--
+    buflen--
+}
+function lastline() {
+    if(buflen > 0) return linebuf[bufindex]
+}
+function pop_line() {
+    if(buflen > 0) _pop_line()
+}
+function _pop_line() {
+    _index = bufindex - (--buflen)
+    print linebuf[_index]
+    delete linebuf[_index]
+}
+
+# excepts the first character is the sign to check (string is trimmed)
+function is_comment(line) {
+    # get character and check
+    line_sign = substr(line, 1, 1)
+    for(c in comment_signs)
+        if(line_sign == comment_signs[c])
+            return 1
+
+    # nothing found
+    return 0
+}
+function was_comment(line, comment) {
+    line = trim(line)
+    if(is_comment(line)) {
+        return trim(substr(line, 2)) == comment
+    }
+}
+
+# print everything if line found instead of processing it
+# maybe just a function to loop through getline for lightest overhead
+found {print; next}
+
+# main loop (til the line was found)
+!found {
+    line = trim($0)
+    # process if the line is not empty (or only contains spaces)
+    if(line != "") {
+        # check for a ini section
+        if(substr(line, 1, 1) == "[" && substr(line, length(line), 1) == "]") {
+            is_section = 1
+            curr_section = line
+
+            if(curr_section == section) {
+                found_section = 1
+                is_curr_section = 1
+            }
+            else {
+                # if nothing found, print it in the valid section before the next one
+                if(is_curr_section) {
+                    if(!found) {
+                        # set found as it is there now
+                        found=1
+
+                        # %codeblock_insert%
+
+                        # print line as it would else only be populated below
+                        print
+                        next
+                    }
+                    is_curr_section = 0
+                }
+            }
+        }
+        else {
+            # only current session is interessting
+            if(is_curr_section) {
+                # check for a comment
+                is_com = is_comment(line)
+                if(is_com) {
+                    line = trim(substr(line, 2))
+                }
+
+                # check for a delimiter and a key (must be at first position due to trimming)
+                if((idel = index(line, delimiter)) && (ikey = index(line, key)) == 1) {
+                    # check there are only spaces between the key and delimiter
+                    if(check_spaces(substr(line, ikey + length(key), idel - (length(key) + 1)))) {
+                        found = 1
+
+                        # %codeblock_found%
+
+                        next
+                    }
+                }
+            }
+        }
+    }
+
+    # works cause no next statement from above *structual programming*
+    push_line()
+}
+
+END {
+    # if not found, it's not already printed
+    if(!found) {
+        flush_buffer()
+
+        # print with section if not found
+        if(!found_section) {
+            # TODO check via buffer if a empty line is necessary
+            print section
+
+            # %codeblock_insert%
+        }
+    }
+}

cdist/conf/type/__ini_value/files/comment.awk

@@ -0,0 +1,57 @@
+# We try to find a comment block  -- how?
+# check how much paragraphs it has
+# check if 
+#
+# this code is crap - at least not well written
+
+# Check the buffer if the comment was found
+function check_comments() {
+    _lastline = bufindex - (buflen - 1)
+    _comm_size = length(comments)
+
+    lastfreeline = 0
+    lastfreecommline = 0
+    comm_index = 0
+
+    # go through all lines
+    for(i = bufindex; i < _lastline; i++) {
+        _line = trim(linebuf[i])
+
+        # empty line?
+        if(_line == "") {
+            lastfreeline = i
+            continue
+        }
+
+        # line start matched
+        if(_line == trim(comments[comm_index])) {
+            # end? else continue
+            if(comm_index < _comm_size) {
+                continue
+            }
+            else {
+
+            }
+        }
+        # reset again cause not matched
+        else comm_index = 0
+
+        # empty comment line
+        if(is_comment(_line)) {
+            _comment = trim(substr(_line, 2))
+
+            # check if empty comment
+            if(_comment == "") {
+                lastfreecommline = i
+            }
+        }
+
+        # check if comments fit in or is too big
+        if((_lastline - bufindex) < _comm_size) {
+            # too short
+        }
+        else {
+            #if()
+        }
+    }
+}

cdist/conf/type/__ini_value/files/common.awk

@@ -0,0 +1,68 @@
+BEGIN {
+    # parameter variables
+    section = get_param_string("section")
+    key = get_param_string("key")
+    delimiter = get_param_string("delimiter")
+    value = get_param_string("value")
+    comment = get_param_string("comment")
+    indentation = get_param_string("indentation")
+    delimiter_space = get_param_string("delimiter-space")
+
+    get_param_array("comment-sign", comment_signs)
+    comment_sign = comment_signs[0]
+
+    if(system("test -f " (ENVIRON["__object"] "/parameter/quote")) == 0) {
+        # quote it now that it only wins checks against quoted values
+        value = ("\"" value "\"")
+    }
+
+    base_spaces = spaces(indentation)
+    delimiter_spaces = spaces(delimiter_space)
+    delimiter_w_spaces = (delimiter_spaces delimiter delimiter_spaces)
+}
+
+function trim(var) {
+    sub(/^[ \t]*/, "", var)
+    sub(/[ \t]*$/, "", var)
+    return var
+}
+function spaces(a) {
+    rspaces = ""
+    for(b = 0; b < a; b++)
+        rspaces = (rspaces " ")
+    return rspaces
+}
+function check_spaces(part) {
+    return match(part, /^[ \t]*$/) == 1
+}
+
+function get_param_string(name) {
+    _paramfile = (ENVIRON["__object"] "/parameter/" name)
+    if((getline tmp < _paramfile) > 0) {
+        close(_paramfile)
+        return tmp
+    }
+    else return ""
+}
+function get_param_array(name, arr) {
+    _paramfile = (ENVIRON["__object"] "/parameter/" name)
+    i=0
+    split("", arr)  # portable clear, like `delete arr`
+    while((getline tmp < _paramfile) > 0) {
+        arr[i++] = tmp
+    }
+    close(_paramfile)
+}
+
+# print value
+function v_print() {
+    printf "%s%s%s%s%s", base_spaces, key, delimiter_w_spaces, value, ORS
+}
+# print commented value
+function v_print_commented() {
+    printf "%s%s%s%s%s%s", base_spaces, comment_sign, key, delimiter_w_spaces, value, ORS
+}
+# print comment
+function c_print() {
+    printf "%s%s %s%s", base_spaces, comment_sign, comment, ORS
+}

cdist/conf/type/__ini_value/files/parts/absent/found.awk

@@ -0,0 +1,5 @@
+# revert line if it was a comment
+if(was_comment(lastline, comment)) revert_line()
+
+# value line was not pushed to the buffer yet
+flush_buffer()

cdist/conf/type/__ini_value/files/parts/commented

@@ -0,0 +1 @@
+present

cdist/conf/type/__ini_value/files/parts/present/found.awk

@@ -0,0 +1,8 @@
+# check if last line was the comment
+was_com_there = was_comment(lastline(), comment)
+
+# print + comment if not there
+flush_buffer()
+if(comment && !was_com_there) c_print()
+
+# %code_print%

cdist/conf/type/__ini_value/files/parts/present/insert.awk

@@ -0,0 +1,56 @@
+# check if there is a comment block before the section
+firstline_index = bufindex - (buflen - 1)
+insertpoint = -1  # the insertpoint marks the point before the insert
+lastfreespace = -1
+for(i = bufindex; i >= firstline_index; i--) {
+    _line = trim(linebuf[i])
+    if(_line == "") {
+        lastfreespace = i
+        continue
+    }
+    if(comment && was_comment(_line, comment)) {
+        insertpoint = i + 1
+        no_insert_comment = 1
+        if(lastfreespace != insertpoint)
+            insert_line_after = 1
+        break
+    }
+    if(!is_comment(_line) || index(_line, delimiter) > 0) {
+        insertpoint = i + 1
+
+        # only insert a line before if we do not have a space around
+        if(lastfreespace == insertpoint)
+            insertpoint++
+        else
+            insert_line_before = 1
+        # check for empty line after the insert point
+        # use absolute boundary cause the insertpoint can be changed
+        if(trim(linebuf[i + 2]) != "")
+            insert_line_after = 1
+        break
+    }
+}
+
+# insert into the last free space
+if(insertpoint == -1) {
+    if(lastfreespace != -1) {
+        insertpoint = lastfreespace
+        insert_line_before = 1
+    }
+    else {
+        insertpoint = firstline_index
+        insert_line_after = 1
+    }
+}
+
+# print lines before
+flush_lines(insertpoint - firstline_index)
+
+
+# print before and comment
+if(insert_line_before) print ""
+if(comment && !no_insert_comment) c_print()
+# %code_print%
+if(insert_line_after) print ""
+
+flush_buffer()

cdist/conf/type/__ini_value/gencode-remote

@@ -0,0 +1,82 @@
+#!/bin/sh -e
+# __ini_value/gencode-remote
+#
+# Generates the code. It will generate an AWK script to add, modify or remove
+# the line. The script differ in some points depend on the state. If the file
+# does not exist, it will only generate the script without the awk overhead.
+
+# strip comments and newlines for a tighter script
+strip_comments() {
+    grep -v '^[[:space:]]*\($\|#\)'
+}
+
+
+state_is="$(cat "$__object/explorer/state")"
+state_should="$(cat "$__object/parameter/state")"
+
+# short-circuit if nothing to do
+if [ "$state_is" = "$state_should" ]; then exit; fi
+
+# file to change
+file="$(cat "$__object/parameter/file")"
+
+
+# validation check
+case "$state_should" in
+    present|commented|absent)
+        # Generate the basic awk struct if a file already exists
+        cat <<SHELL
+tmpfile="\$(mktemp '${file}.cdist.XXXXXXXX')"
+if [ -f '$file' ]; then
+    cp -p '$file' "\$tmpfile"
+fi
+
+awk -f - '$file' > "\$tmpfile" <<'AWK'
+SHELL
+
+        # generate the awk script and strip unnecessary things
+        {
+            # basic functions which everyone needs
+            cat "$__type/files/common.awk"
+
+            # generate the script
+            awk -v state="$state_should" '
+            function parse(line) {
+                if(match(line, /^[ \t]*# %code_print%$/) > 0) {
+                    if(state == "present")
+                        print "v_print()"
+                    else if(state == "commented")
+                        print "v_print_commented()"
+                    else
+                        print "print \"script compile error! cdist state " state " unkown!\" > /dev/stderr"
+                }
+                else print line
+            }
+            {
+                if(match($0, /^[ \t]*# %codeblock_([^%]+)%$/) > 0) {
+                    split($2, result, "_"); type = substr(result[2], 1, length(result[2]) - 1)
+                    file = (ENVIRON["__type"] "/files/parts/" state "/" type ".awk")
+                    while((getline line < file) > 0)
+                        parse(line)
+                    close(file)
+                }
+                else print
+            }' "$__type/files/base.awk"
+        } | strip_comments
+
+        # end of here-doc
+        cat <<SHELL
+AWK
+mv -f "\$tmpfile" '$file'
+SHELL
+
+        # Do not threat it differently if the file does not exist. It's just
+        # absent. Because multiple explorers can say the file does not exist,
+        # so the file should not be completly overwritten all times.
+        ;;
+
+    *)
+        echo "not done yet!" >&2
+        exit 1
+        ;;
+esac

cdist/conf/type/__ini_value/man.rst

@@ -0,0 +1,139 @@
+cdist-type__ini_value(7)
+========================
+
+NAME
+----
+cdist-type__ini_value - Handles ini- and conf-style configuration options
+
+
+DESCRIPTION
+-----------
+This cdist type allow changes to more advanced key-value based configurations.
+Most commonly this would be ini- or conf-style configurations.
+
+The type can have following states:
+
+    present
+        The line exists with the correct value.
+
+    commented
+        The key-value is outcommented.
+
+    absent
+        The key-value line does not exist in the given section.
+
+
+REQUIRED PARAMETERS
+-------------------
+file
+    The file to modify.
+
+delimiter
+    The delimiter which seperates each key-value pair.
+
+
+OPTIONAL PARAMETERS
+-------------------
+state
+    One of the states defined in the above section. Defaults to `present`.
+
+section
+    The section where the value is located at. It always need to be surrounded
+    by square brackets as common for ini files. If not, the section will not be
+    found. If no section is specified, the block before any section is meant.
+
+key
+    The key to identify the key-value pair. Must be set if the state is not
+    absent.
+
+value
+    The value assigned to the key. Must be set if the state is not absent.
+    Else, an empty value is assigned to the given key.
+
+comment
+    The comment which should be placed above the configuration line.
+
+indentation
+    The indentation the key-value pair should have. Will be applied on inserts,
+    but also be enforced if ``--normalize`` is set.
+
+comment-sign
+    This declares the comment signs that are valid to use in the configuration
+    file. Each parameter must declare a single character only; multiple
+    parameters are possible. It uses the first specified sign as comment
+    character if this type needs to insert comments.
+
+delimiter-space
+    The number of spaces before and after the delimiter which should be free.
+    This number applies to each site of the delimiter separately, so one space
+    means one space to the left and right side of the delimiter.
+
+    The delimiter will be matched independendtly of this parameter and will
+    only be corrected if ``--normalize`` is set.
+
+
+BOOLEAN PARAMETERS
+------------------
+normalize
+    This parameter enforces that the parameter is always pretty in the
+    configuration file. Even if a key-value pair is correct as-is, it will
+    correct the line to be pretty and perfect.
+
+quote
+    Wrap double quotes (``"``) around the value. If the value is previously
+    unquoted, the file will be modified to quote the value.
+
+
+MESSAGES
+--------
+The type currently fails to give a correct information of what he did cause of
+the following construct. It has two `awk` scripts which do the job:
+
+1. The explorer script which will outputs a single state of the given
+   key-value. Because the current state can contain much more states than the
+   state that should be, one state is returned like `wrongvalue` even if
+   `commented` is correct, too. Therefor, it vanishes the information that the
+   line is commented, too, even this could be a nice information that the
+   messaging system could emit.
+
+2. The `code-remote` script also goes through the whole file and print out the
+   same file except the line line that should be changed. This is done because
+   it can not be garanteed that an other type already modifed the file, which
+   may moved the key-value to an other position. Then, the script replaces the
+   line which a pretty-printed key-value pair.
+
+So the detected state is not important for the remote script, as it only needs
+to know that it must be run cause of differences and what the state should be.
+So if there are a state like `wrongvalue`, it triggers to correction of the
+line, but it do not care if it was `wrongvalue`, `wrongformat` or `commented`
+which trigged the run. Because of this need, the explorer retuns only an
+easy-to-use value to detect if something needs to be changed.
+
+Therefor, it is unable to correctly emit messages with the current base.
+
+
+EXAMPLES
+--------
+
+.. code-block:: sh
+
+    # set a value in a configuration
+    __ini_value fancy-id --file /etc/foo/bar.ini --section '[welcome]' \
+        --key hi --value baz --delimiter ' = '
+
+    # outcomment a value
+    __ini_value foo --file /etc/bar/foo.conf --state commented \
+        --key noop --value true --delimiter ' = ' --comment 'not this time!'
+
+
+AUTHORS
+-------
+Matthias Stecher <matthiasstecher at gmx.de>
+
+
+COPYING
+-------
+Copyright \(C) 2021 Matthias Stecher. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__ini_value/parameter/boolean

@@ -0,0 +1,2 @@
+normalize
+quote

cdist/conf/type/__ini_value/parameter/default/comment-sign

@@ -0,0 +1,2 @@
+;
+#

cdist/conf/type/__ini_value/parameter/default/indentation

@@ -0,0 +1 @@
+0

cdist/conf/type/__ini_value/parameter/default/state

@@ -0,0 +1 @@
+present

cdist/conf/type/__ini_value/parameter/optional

@@ -0,0 +1,7 @@
+section
+key
+state
+value
+indentation
+comment
+delimiter-space

cdist/conf/type/__ini_value/parameter/optional_multiple

@@ -0,0 +1 @@
+comment-sign

cdist/conf/type/__ini_value/parameter/required

@@ -0,0 +1,2 @@
+file
+delimiter

cdist/conf/type/__letsencrypt_cert/manifest

@@ -41,7 +41,7 @@ if [ -z "${certbot_fullpath}" ]; then
 					require="__apt_source/stretch-backports" __package_apt certbot \
 						--target-release stretch-backports
 				;;
-				10*|11*)
+				10*)
 					__package_apt certbot
 				;;
 

cdist/conf/type/__package_apt/gencode-remote

@@ -81,24 +81,12 @@ aptget="DEBIAN_FRONTEND=noninteractive apt-get --quiet --yes -o Dpkg::Options::=
 
 case "$state_should" in
     present)
-        # There are special arguments to apt(8) to prevent aborts if apt woudn't been
-        # updated after the 19th April 2021 till the bullseye release. The additional
-        # arguments acknoledge the happend suite change (the apt(8) update does the
-        # same by itself).
-        #
-        # Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-        # allows backward compatablility to pre-buster Debian versions.
-        #
-        # See more: ticket #861
-        # https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-        apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
         # following is bit ugly, but important hack.
         # due to how cdist config run works, there isn't
         # currently better way to do it :(
         cat << EOF
 if [ ! -f /var/cache/apt/pkgcache.bin ] || [ "\$( stat --format %Y /var/cache/apt/pkgcache.bin )" -lt "\$( date +%s -d '-1 day' )" ]
-then echo apt-get $apt_opts update > /dev/null 2>&1 || true
+then echo apt-get update > /dev/null 2>&1 || true
 fi
 EOF
         if [ -n "$version" ]; then

cdist/conf/type/__package_update_index/gencode-remote

@@ -41,19 +41,7 @@ fi
 case "$type" in
     yum) ;;
     apt)
-        # There are special arguments to apt(8) to prevent aborts if apt woudn't been
+        echo "apt-get --quiet update"
-        # updated after the 19th April 2021 till the bullseye release. The additional
-        # arguments acknoledge the happend suite change (the apt(8) update does the
-        # same by itself).
-        #
-        # Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-        # allows backward compatablility to pre-buster Debian versions.
-        #
-        # See more: ticket #861
-        # https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-        apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
-        echo "apt-get --quiet $apt_opts update"
         echo "apt-cache updated (age was: $currage)" >> "$__messages_out"
         ;;
     pacman)

cdist/conf/type/__package_upgrade_all/gencode-remote

@@ -28,10 +28,6 @@ apt_clean="$__object/parameter/apt-clean"
 
 apt_dist_upgrade="$__object/parameter/apt-dist-upgrade"
 
-if [ -f "$__object/parameter/apt-with-new-pkgs" ]; then
-	apt_with_new_pkgs="--with-new-pkgs"
-fi
-
 if [ -f "$type" ]; then
     type="$(cat "$type")"
 else
@@ -58,7 +54,7 @@ case "$type" in
     apt)
         if [ -f "$apt_dist_upgrade" ]
         then echo "$aptget dist-upgrade"
-        else echo "$aptget $apt_with_new_pkgs upgrade"
+        else echo "$aptget upgrade"
         fi
 
         if [ -f "$apt_clean" ]

cdist/conf/type/__package_upgrade_all/man.rst

@@ -33,14 +33,6 @@ BOOLEAN PARAMETERS
 apt-dist-upgrade
     Do dist-upgrade instead of upgrade.
 
-apt-with-new-pkg
-    Allow installing new packages when used in conjunction with
-    upgrade. This is useful if the update of an installed package
-    requires new dependencies to be installed. Instead of holding the
-    package back upgrade will upgrade the package and install the new
-    dependencies. Note that upgrade with this option will never remove
-    packages, only allow adding new ones.
-
 apt-clean
     Clean out the local repository of retrieved package files.
 

cdist/conf/type/__package_upgrade_all/parameter/boolean

@@ -1,3 +1,2 @@
 apt-clean
 apt-dist-upgrade
-apt-with-new-pkgs

cdist/conf/type/__sed/explorer/file

@@ -1,16 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/file" ]
-then
-    file="$( cat "$__object/parameter/file" )"
-else
-    file="/$__object_id"
-fi
-
-if [ ! -e "$file" ]
-then
-    echo "$file does not exist" >&2
-    exit 1
-fi
-
-cat "$file"

cdist/conf/type/__sed/gencode-remote

@@ -1,58 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/file" ]
-then
-    file="$( cat "$__object/parameter/file" )"
-else
-    file="/$__object_id"
-fi
-
-script="$( cat "$__object/parameter/script" )"
-
-if [ "$script" = '-' ]
-then
-    script="$( cat "$__object/stdin" )"
-fi
-
-# since stdin is not available in explorer, we pull file from target with explorer
-
-file_from_target="$__object/explorer/file"
-
-sed_cmd='sed'
-
-if [ -f "$__object/parameter/regexp-extended" ]
-then
-    sed_cmd="$sed_cmd -E"
-fi
-
-# do sed dry run, diff result and if no change, then there's nothing to do
-# also redirect diff's output to stderr for debugging purposes
-
-if echo "$script" | "$sed_cmd" -f - "$file_from_target" | diff -u "$file_from_target" - >&2
-then
-    exit 0
-fi
-
-# we can't use -i, because it's not posix, so we fly with tempfile and cp
-# and we use cp because we want to preserve destination file's attributes
-
-# shellcheck disable=SC2016
-echo 'tmp="$__object/tempfile"'
-
-echo "$sed_cmd -f - '$file' > \"\$tmp\" << EOF"
-
-echo "$script"
-
-echo 'EOF'
-
-echo "cp \"\$tmp\" '$file'"
-
-# shellcheck disable=SC2016
-echo 'rm -f "$tmp"'
-
-echo 'change' >> "$__messages_out"
-
-if [ -f "$__object/parameter/onchange" ]
-then
-    cat "$__object/parameter/onchange"
-fi

cdist/conf/type/__sed/man.rst

@@ -1,57 +0,0 @@
-cdist-type__sed(7)
-==================
-
-NAME
-----
-cdist-type__sed - Transform text files with ``sed``
-
-
-DESCRIPTION
------------
-Transform text files with ``sed``.
-
-
-REQUIRED MULTIPLE PARAMETERS
-----------------------------
-script
-   ``sed`` script.
-   If ``-`` then the script is read from ``stdin``.
-
-
-OPTIONAL PARAMETERS
--------------------
-file
-   Path to the file. Defaults to ``$__object_id``.
-
-onchange
-   Execute this command if ``sed`` changes file.
-
-
-BOOLEAN PARAMETERS
-------------------
-regexp-extended
-   Use extended regular expressions in the script.
-   Might not be supported with every ``sed`` version.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-   __sed /tmp/foobar --script 's/foo/bar/'
-
-   echo 's/foo/bar/' | __sed foobar --file /tmp/foobar --script -
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.

cdist/conf/type/__sed/parameter/boolean

@@ -1 +0,0 @@
-regexp-extended

cdist/conf/type/__sed/parameter/optional

@@ -1,2 +0,0 @@
-file
-onchange

cdist/conf/type/__sed/parameter/required_multiple

@@ -1 +0,0 @@
-script

cdist/conf/type/__ssh_authorized_key/gencode-remote

@@ -40,7 +40,6 @@ if [ -f "$file" ]; then
    grep -v -F -x '$line' '$file' >\$tmpfile
 fi
 cat "\$tmpfile" >"$file"
-rm -f "\$tmpfile"
 DONE
 }
 

cdist/integration.py

@@ -84,7 +84,7 @@ def _process_hosts_simple(action, host, manifest, verbose,
     """
     if isinstance(host, str):
         hosts = [host, ]
-    elif isinstance(host, collections.abc.Iterable):
+    elif isinstance(host, collections.Iterable):
         hosts = host
     else:
         raise cdist.Error('Invalid host argument: {}'.format(host))

cdist/util/fsproperty.py

@@ -33,7 +33,7 @@ class AbsolutePathRequiredError(cdist.Error):
         return 'Absolute path required, got: {}'.format(self.path)
 
 
-class FileList(collections.abc.MutableSequence):
+class FileList(collections.MutableSequence):
     """A list that stores it's state in a file.
 
     """
@@ -102,7 +102,7 @@ class FileList(collections.abc.MutableSequence):
         self.__write(lines)
 
 
-class DirectoryDict(collections.abc.MutableMapping):
+class DirectoryDict(collections.MutableMapping):
     """A dict that stores it's items as files in a directory.
 
     """

docs/changelog

@@ -3,17 +3,6 @@ Changelog
 
 next:
 	* Explorer machine_type: Rewrite (Dennis Camera)
-	* New type: __sed (Ander Punnar)
-	* New type: __haproxy_dualstack (Evilham and ungleich)
-	* Type __apt_update_index: Fix complaint about suite change (Matthias Stecher)
-	* Type __package_update_index: Fix complaint about suite change (Matthias Stecher)
-	* Type __package_upgrade_all: Add new --apt-with-new-pkgs argument (Evilham)
-	* Type __apt_source: Fix complaint about suite change (Matthias Stecher)
-	* Type __package_apt: Fix complaint about suite change (Matthias Stecher)
-	* Type __debconf_set_selections: Fix bug where --file was unsupported (Evilham)
-	* Types __letsencrypt_cert, __grafana_dashboard: Improve bullseye support (Evilham)
-	* Type __ssh_authorized_key: Also remove tmpfile if removing line (Mark Verboom)
-	* Type __apt_pin: Add default priority, add comment in generated files (Daniel Fancsali)
 
 6.9.8: 2021-08-24
 	* Type __rsync: Rewrite (Ander Punnar)