From a2868a3f0747ab8df22199c4a734fc11696fba3d Mon Sep 17 00:00:00 2001 From: Nico Schottelius Date: Sun, 4 Aug 2019 09:04:01 +0200 Subject: [PATCH] Doc,various --- bin/gen_nat64_table_entries.py | 2 +- bin/init_ipv4_esprimo.sh | 4 + bin/set_ipv4_neighbor.sh | 6 +- doc/Design.tex | 3 + doc/Problem.tex | 143 +++++++++++---------- doc/Summary.tex | 4 + doc/Timetable.tex | 2 +- doc/appendix.tex | 187 ++++++++++++++++++++++++++- doc/plan.org | 223 ++++++++++++++++++++++++++++++++- 9 files changed, 500 insertions(+), 74 deletions(-) create mode 100644 bin/init_ipv4_esprimo.sh diff --git a/bin/gen_nat64_table_entries.py b/bin/gen_nat64_table_entries.py index f317721..ab2cd9a 100644 --- a/bin/gen_nat64_table_entries.py +++ b/bin/gen_nat64_table_entries.py @@ -10,7 +10,7 @@ table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 425407664113 table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477352206378 => 64 0 0 0 0 # 2001:db8:42:2a to be translated to 10.0.0.42: -table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960998550477184434218 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0 +#table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960998550477184434218 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0 # 2001:db8:42::a00:2a to 10.0.0.42 table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960998550477352206378 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0 diff --git a/bin/init_ipv4_esprimo.sh b/bin/init_ipv4_esprimo.sh new file mode 100644 index 0000000..989469e --- /dev/null +++ b/bin/init_ipv4_esprimo.sh @@ -0,0 +1,4 @@ +#!/bin/sh + +ip addr add 10.0.0.42/24 dev enp2s0f0 +ip link set enp2s0f0 up diff --git a/bin/set_ipv4_neighbor.sh b/bin/set_ipv4_neighbor.sh index 43ad9ca..cb5581f 100755 --- a/bin/set_ipv4_neighbor.sh +++ b/bin/set_ipv4_neighbor.sh @@ -3,9 +3,13 @@ # eth1 / nsg remote_mac=f8:f2:1e:41:44:9c +# enp2s0f1 / esprimo +remote_mac=f8:f2:1e:09:62:d1 +intf=enp2s0f1 + set -x for addr in $(seq 1 64); do hwaddr=$(printf "%0.2d" $addr) - sudo ip neighbor add 10.0.0.$addr lladdr $remote_mac dev enp2s0f0 + sudo ip neighbor add 10.0.0.$addr lladdr $remote_mac dev ${intf} done diff --git a/doc/Design.tex b/doc/Design.tex index 26faebd..79e5239 100644 --- a/doc/Design.tex +++ b/doc/Design.tex @@ -5,6 +5,9 @@ Description of the theory/software/hardware that you designed. Maybe figures here? controller, +\section{\label{Design:General}General} +\section{\label{Design:BMV2}BMV2} + \section{\label{Design:NetPFGA}NetFPGA} Netpfga live, diff --git a/doc/Problem.tex b/doc/Problem.tex index 879047b..93588c1 100644 --- a/doc/Problem.tex +++ b/doc/Problem.tex @@ -1,92 +1,99 @@ -\chapter{\label{chapter2}Problem / latex samples} +\chapter{\label{chapter2}Problem} + %** Problem.tex: Documentation in own words of the problem to % be addressed in this document: % What is the challenge, why is it useful what you % plan to do. -In \ref{introduction} we start with our introduction to the problem that we -are going to address. Since we do not want to waste the readers time we -go and show the essential issues of latex in section -\ref{chapter2:essentials}. +%% In \ref{introduction} we start with our introduction to the problem that we +%% are going to address. Since we do not want to waste the readers time we +%% go and show the essential issues of latex in section +%% \ref{chapter2:essentials}. -\section{\label{chapter2:essentials}Essentials} +\section{\label{chapter2:linespeed}Line Speed NAT64} +NAT64 in software is CPU bound. Hardware can potentially do this at +line speed. -Well this section can be further subdivided into subsection. We present -this in subsection \ref{chapter2:essentials:subsections}. +\section{\label{chapter2:transitition}Simplify IPv6 deployments} +Currently network operators have to focus on two network stacks when +designing networks: IPv6 and IPv4. As To simplify network setups -\subsection{\label{chapter2:essentials:subsections}Subsections} +%% Well this section can be further subdivided into subsection. We present +%% this in subsection \ref{chapter2:essentials:subsections}. -\paragraph{\label{introduction:essentials:subsections:paragraph}Paragraphs} -can be specially referenced as well. +%% \subsection{\label{chapter2:essentials:subsections}Subsections} -Of further importance is the understanding of the following environments: +%% \paragraph{\label{introduction:essentials:subsections:paragraph}Paragraphs} +%% can be specially referenced as well. -%*** itemized lists -\begin{itemize} -\item This shows an itemized bullet list - \begin{itemize} - \item Which can be used for several levels\ldots - \end{itemize} -\end{itemize} +%% Of further importance is the understanding of the following environments: -%*** enumerated lists -\begin{enumerate} -\item The same applies to enumerated lists. -\end{enumerate} +%% %*** itemized lists +%% \begin{itemize} +%% \item This shows an itemized bullet list +%% \begin{itemize} +%% \item Which can be used for several levels\ldots +%% \end{itemize} +%% \end{itemize} + +%% %*** enumerated lists +%% \begin{enumerate} +%% \item The same applies to enumerated lists. +%% \end{enumerate} -%** figures -\begin{figure}[!hbt] - \begin{center} -% \includegraphics[width=\textwidth, angle=90]{file_name.eps} - \caption{This is a figure to be printed in a float} - \label{file_name} - \end{center} -\end{figure} +%% %** figures +%% \begin{figure}[!hbt] +%% \begin{center} +%% % \includegraphics[width=\textwidth, angle=90]{file_name.eps} +%% \caption{This is a figure to be printed in a float} +%% \label{file_name} +%% \end{center} +%% \end{figure} -By figure \ref{file_name}, we show some funny figures. +%% By figure \ref{file_name}, we show some funny figures. -Table with caption and footnotes below the table. +%% Table with caption and footnotes below the table. -\begin{table}[htbp] -\begin{center}\begin{minipage}{\textwidth} -\begin{tabular}{| c | p{130pt} | l |} -\hline -Column 1 & Column 2 \newline (additional line) & Column 3 \\ -\hline -C1,R2 & C2,R2 & C2,R3 \\ -\hline -C1,R3 & \multicolumn{2}{| c |}{C2\&C3,R3} \\ -\hline -C1,R4 & C2,R4\footnote{Footnote to table~\ref{tab:table1}} & C3,R4\\ -\hline -\end{tabular} -\end{minipage} -\caption{Table 1} -\label{tab:table1} -\end{center} -\end{table} +%% \begin{table}[htbp] +%% \begin{center}\begin{minipage}{\textwidth} +%% \begin{tabular}{| c | p{130pt} | l |} +%% \hline +%% Column 1 & Column 2 \newline (additional line) & Column 3 \\ +%% \hline +%% C1,R2 & C2,R2 & C2,R3 \\ +%% \hline +%% C1,R3 & \multicolumn{2}{| c |}{C2\&C3,R3} \\ +%% \hline +%% C1,R4 & C2,R4\footnote{Footnote to table~\ref{tab:table1}} & C3,R4\\ +%% \hline +%% \end{tabular} +%% \end{minipage} +%% \caption{Table 1} +%% \label{tab:table1} +%% \end{center} +%% \end{table} -Examples of different text sizes: +%% Examples of different text sizes: -\small Small \\ -\scriptsize Script size \\ -\normalsize Normal \\ -\large Large \\ -\huge Huge \\ -\normalsize +%% \small Small \\ +%% \scriptsize Script size \\ +%% \normalsize Normal \\ +%% \large Large \\ +%% \huge Huge \\ +%% \normalsize -\CHECK -If we reference to another document, we cite the document \cite{Lamport:LaTeX}. +%% \CHECK +%% If we reference to another document, we cite the document \cite{Lamport:LaTeX}. -%** landscape -\NEW -\begin{landscape} -Of some interest is also the landscape environment: -\end{landscape} +%% %** landscape +%% \NEW +%% \begin{landscape} +%% Of some interest is also the landscape environment: +%% \end{landscape} -\verbatiminput{filename.txt} -Even though we don't think full listings are useful in documents, -you can easily insert complete files by the verbatiminput{}-command. +%% \verbatiminput{filename.txt} +%% Even though we don't think full listings are useful in documents, +%% you can easily insert complete files by the verbatiminput{}-command. diff --git a/doc/Summary.tex b/doc/Summary.tex index 78f1c7a..6e15234 100644 --- a/doc/Summary.tex +++ b/doc/Summary.tex @@ -4,3 +4,7 @@ % It should conclude by a conclusion. Sum up what you have done and recapitulate your key findings. + +\section{\label{summary:overall}Overall} +\section{\label{summary:bmv2}BMV2} +\section{\label{summary:netpfga}NetFGPA} diff --git a/doc/Timetable.tex b/doc/Timetable.tex index 8d70765..2acb15b 100644 --- a/doc/Timetable.tex +++ b/doc/Timetable.tex @@ -1,3 +1,3 @@ -\chapter{\label{timetable}Timetable (?)} +\chapter{\label{timetable}Timetable} Here may come your thesis schedule (the original plan and ev. the actual outcome). -> can be from plan.org diff --git a/doc/appendix.tex b/doc/appendix.tex index 066a635..83358c3 100644 --- a/doc/appendix.tex +++ b/doc/appendix.tex @@ -298,7 +298,192 @@ Step 4: ping test should translate, but fail with wrong checksum: -\chapter{\label{appendixB}Appendix B?} +\chapter{\label{appendixB}NetFPGA Logs} +Majority of the log files are stored inside the source code directory +stored at ``netpfga/logs''. It follows a selection of log files + +\section{\label{chapterB:netpfga-flasherror}NetFPGA Flash Errors} +Sometimes flashing bitfiles to the NetFPGA will fail. A random amount +of reboots (1 to 3) and a random amount of reflashing will fix this +problem. + +Below can be found the log output from the flashing process. + +\begin{verbatim} +nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh" +++ which vivado ++ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado ++ bitimage=minip4.bit ++ configWrites=config_writes.sh ++ '[' -z minip4.bit ']' ++ '[' -z config_writes.sh ']' ++ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']' ++ rmmod sume_riffa ++ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit +rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems. +RUN loading image file. +minip4.bit +100% 19MB 1.7MB/s 00:11 +fpga configuration failed. DONE PIN is not HIGH + invoked from within +"::tcf::eval -progress ::xsdb::print_progress {::tcf::cache_enter tcfchan#0 {tcf_cache_eval {process_tcf_actions_cache_client ::tcfclient#0::arg}}}" + (procedure "::tcf::cache_eval_with_progress" line 2) + invoked from within +"::tcf::cache_eval_with_progress [dict get $arg chan] [list process_tcf_actions_cache_client $argvar] $progress" + (procedure "process_tcf_actions" line 1) + invoked from within +"process_tcf_actions $arg ::xsdb::print_progress" + (procedure "fpga" line 430) + invoked from within +"fpga -f $bitimage" + (file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl" line 33) + ++ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh +Check programming FPGA or Reboot machine ! ++ rmmod sume_riffa +rmmod: ERROR: Module sume_riffa is not currently loaded ++ modprobe sume_riffa ++ ifconfig nf0 up +nf0: ERROR while getting interface flags: No such device ++ ifconfig nf1 up +nf1: ERROR while getting interface flags: No such device ++ ifconfig nf2 up +nf2: ERROR while getting interface flags: No such device ++ ifconfig nf3 up +nf3: ERROR while getting interface flags: No such device ++ bash config_writes.sh + +\end{verbatim} + +\section{\label{chapterB:netpfga-flashok}NetFPGA Flash Success} +A successful flashing process also emits a couple of errors, however +the message ``fpga configuration failed. DONE PIN is not HIGH'' and +its succeeding lines are missing, as seen below. + +After that in all cases a reboot is required; the PCI rescan in no +tested case showed the nf devices. + + +\begin{verbatim} +nico@nsg-System:~$ cd $NF_DESIGN_DIR/bitfiles/ +nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh" +++ which vivado ++ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado ++ bitimage=minip4.bit ++ configWrites=config_writes.sh ++ '[' -z minip4.bit ']' ++ '[' -z config_writes.sh ']' ++ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']' ++ rmmod sume_riffa ++ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit +rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems. +RUN loading image file. +minip4.bit +attempting to launch hw_server + +****** Xilinx hw_server v2018.2 + **** Build date : Jun 14 2018-20:18:37 + ** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved. + +INFO: hw_server application started +INFO: Use Ctrl-C to exit hw_server application + +INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121 + +100% 19MB 1.7MB/s 00:11 ++ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh +Check programming FPGA or Reboot machine ! ++ rmmod sume_riffa +rmmod: ERROR: Module sume_riffa is not currently loaded ++ modprobe sume_riffa ++ ifconfig nf0 up +nf0: ERROR while getting interface flags: No such device ++ ifconfig nf1 up +nf1: ERROR while getting interface flags: No such device ++ ifconfig nf2 up +nf2: ERROR while getting interface flags: No such device ++ ifconfig nf3 up +nf3: ERROR while getting interface flags: No such device ++ bash config_writes.sh +nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ +\end{verbatim} + +\section{\label{chapterB:netpfga-kernelmodule}NetFPGA Kernel module} +After a successful flash, loading the kernel module will enable nf +devices to appear in the operating system. + +\begin{verbatim} +nico@nsg-System:~$ ip l +1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 +2: eth0: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 + link/ether 74:d0:2b:98:38:f6 brd ff:ff:ff:ff:ff:ff +3: eth1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether f8:f2:1e:41:44:9c brd ff:ff:ff:ff:ff:ff +4: eth2: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether f8:f2:1e:41:44:9d brd ff:ff:ff:ff:ff:ff +5: wg0: mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 + link/none +nico@nsg-System:~$ ~/master-thesis/bin/build-load-drivers.sh ++ cd /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 ++ sudo modprobe -r sume_riffa ++ make clean +make -C /lib/modules/4.15.0-55-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 clean +make[1]: Entering directory '/usr/src/linux-headers-4.15.0-55-generic' + CLEAN /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/.tmp_versions + CLEAN /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/Module.symvers +make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-55-generic' ++ make all +make -C /lib/modules/4.15.0-55-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules +make[1]: Entering directory '/usr/src/linux-headers-4.15.0-55-generic' + CC [M] /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.o + Building modules, stage 2. + MODPOST 1 modules + CC /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.mod.o + LD [M] /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.ko +make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-55-generic' ++ sudo make install +make -C /lib/modules/4.15.0-55-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules +make[1]: Entering directory '/usr/src/linux-headers-4.15.0-55-generic' + Building modules, stage 2. + MODPOST 1 modules +make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-55-generic' +install -o root -g root -m 0755 -d /lib/modules/4.15.0-55-generic/extra/sume_riffa/ +install -o root -g root -m 0755 sume_riffa.ko /lib/modules/4.15.0-55-generic/extra/sume_riffa/ +depmod -a 4.15.0-55-generic ++ sudo modprobe sume_riffa ++ grep sume_riffa ++ lsmod +sume_riffa 28672 0 +nico@nsg-System:~$ +nico@nsg-System:~$ ip l +1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 +2: eth0: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 + link/ether 74:d0:2b:98:38:f6 brd ff:ff:ff:ff:ff:ff +3: eth1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether f8:f2:1e:41:44:9c brd ff:ff:ff:ff:ff:ff +4: eth2: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether f8:f2:1e:41:44:9d brd ff:ff:ff:ff:ff:ff +5: wg0: mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 + link/none +6: nf0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether 02:53:55:4d:45:00 brd ff:ff:ff:ff:ff:ff +7: nf1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether 02:53:55:4d:45:01 brd ff:ff:ff:ff:ff:ff +8: nf2: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether 02:53:55:4d:45:02 brd ff:ff:ff:ff:ff:ff +9: nf3: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 + link/ether 02:53:55:4d:45:03 brd ff:ff:ff:ff:ff:ff +nico@nsg-System:~$ + +\end{verbatim} + +\section{\label{chapterB:netpfga-nftraffic}NetFPGA misses packets on nf*} +While the nf devices appear in the operating system, packets emitted +by the netpfga cannot be sniffed on the nf interfaces +directly. Instead one has to sniff packets on a physical network card +that is connected to the specific output port. %Entries for the list of abbrevations: diff --git a/doc/plan.org b/doc/plan.org index d3f702a..d2e04d3 100644 --- a/doc/plan.org +++ b/doc/plan.org @@ -3,13 +3,16 @@ | 2019-02-21 | Kick-Off | x | | | Finish all admin points | x | | | Know when/how to coordinate | x | +| | | | | 2019-02-21 | Clarifications Ueli Maurer (Mentor) | x | | | Write mail / phone | x | +| | | | | 2019-02-22 | Have all papers handed in | | | | | | | 2019-02-22 | Have rough definition of tasks | x | | | | | -| 2019-02-23 | python2 / ipaddress is buggy | x | +| 2019-02-23 | python2 / ipaddress is buggy / has unicode problems | x | +| | | | | | p4utils is python2 only support | | | | bmpy_utils is not installable with pip | | | | python2 / latest ipaddress==1.0.22 still has the bug | | @@ -21,7 +24,7 @@ | 2019-02-24 | non reliable neighbor entries / flushing addresses puts into failed | | | | | | | | | | -| 2019-02-28 | Meet Laurent #2 | | +| 2019-02-28 | Meeting Laurent | | | | - Status | | | | * Setup base code | | | | * Parser for all protocols (udp,tcp,icmp,icmp6) | | @@ -8264,6 +8267,7 @@ table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960 #+END_CENTER *** TODO 2019-08-02: ipv4 checksum after nat64 is empty! +*** TODO 2019-08-03 ** The NetPFGA saga Problems encountered: - The logfile for a compile run is 10k+ lines @@ -8355,6 +8359,221 @@ ls: cannot access '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw - not using raise() and hiding source of errors (_hexify) +- sometimes flashing fails: + +#+BEGIN_CENTER +nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh" +++ which vivado ++ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado ++ bitimage=minip4.bit ++ configWrites=config_writes.sh ++ '[' -z minip4.bit ']' ++ '[' -z config_writes.sh ']' ++ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']' ++ rmmod sume_riffa ++ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit +rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems. +RUN loading image file. +minip4.bit +100% 19MB 1.7MB/s 00:11 +fpga configuration failed. DONE PIN is not HIGH + invoked from within +"::tcf::eval -progress ::xsdb::print_progress {::tcf::cache_enter tcfchan#0 {tcf_cache_eval {process_tcf_actions_cache_client ::tcfclient#0::arg}}}" + (procedure "::tcf::cache_eval_with_progress" line 2) + invoked from within +"::tcf::cache_eval_with_progress [dict get $arg chan] [list process_tcf_actions_cache_client $argvar] $progress" + (procedure "process_tcf_actions" line 1) + invoked from within +"process_tcf_actions $arg ::xsdb::print_progress" + (procedure "fpga" line 430) + invoked from within +"fpga -f $bitimage" + (file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl" line 33) + ++ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh +Check programming FPGA or Reboot machine ! ++ rmmod sume_riffa +rmmod: ERROR: Module sume_riffa is not currently loaded ++ modprobe sume_riffa ++ ifconfig nf0 up +nf0: ERROR while getting interface flags: No such device ++ ifconfig nf1 up +nf1: ERROR while getting interface flags: No such device ++ ifconfig nf2 up +nf2: ERROR while getting interface flags: No such device ++ ifconfig nf3 up +nf3: ERROR while getting interface flags: No such device ++ bash config_writes.sh +nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ + +#+END_CENTER +*** TODO 2019-08-04: test nat64: ipv4 checksums +**** DONE Setting table entries: ok + CLOSED: [2019-08-04 Sun 08:55] + #+BEGIN_CENTER + nico@nsg-System:~$ ~/master-thesis/bin/switch-cli.sh + loading libsume.. + loading libsume.. + loading libcam.. + The SimpleSumeSwitch interactive command line tool + type help to see all commands + >> table_cam_add_entry realmain_v4_networks_0 realmain.set_egress_port 167772202 => 16 0 0 0 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)] + action_name = TopPipe.realmain.set_egress_port + field_vals = [1, '16', '0', '0', '0', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020250 = 0xa00002a + WROTE 0x44020280 = 0x0000 + WROTE 0x44020284 = 0x0000 + WROTE 0x44020288 = 0x10000000 + WROTE 0x4402028c = 0x0001 + READ 0x44020244 = 0x0001 + WROTE 0x44020240 = 0x0001 + READ 0x44020244 = 0x0001 + READ 0x44020244 = 0x0001 + success + >> + >> table_cam_add_entry realmain_v4_networks_0 realmain.set_egress_port 167772164 => 16 0 0 0 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)] + action_name = TopPipe.realmain.set_egress_port + field_vals = [1, '16', '0', '0', '0', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020250 = 0xa000004 + WROTE 0x44020280 = 0x0000 + WROTE 0x44020284 = 0x0000 + WROTE 0x44020288 = 0x10000000 + WROTE 0x4402028c = 0x0001 + READ 0x44020244 = 0x0001 + WROTE 0x44020240 = 0x0001 + READ 0x44020244 = 0x0001 + READ 0x44020244 = 0x0001 + success + + >> table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477184434182 => 64 0 0 0 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)] + action_name = TopPipe.realmain.set_egress_port + field_vals = [1, '64', '0', '0', '0', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020350 = 0x0006 + WROTE 0x44020354 = 0x0000 + WROTE 0x44020358 = 0x420000 + WROTE 0x4402035c = 0x20010db8 + WROTE 0x44020380 = 0x0000 + WROTE 0x44020384 = 0x0000 + WROTE 0x44020388 = 0x40000000 + WROTE 0x4402038c = 0x0001 + READ 0x44020344 = 0x0001 + WROTE 0x44020340 = 0x0001 + READ 0x44020344 = 0x0001 + READ 0x44020344 = 0x0001 + success + >> table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477184434242 => 64 0 0 0 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)] + action_name = TopPipe.realmain.set_egress_port + field_vals = [1, '64', '0', '0', '0', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020350 = 0x0042 + WROTE 0x44020354 = 0x0000 + WROTE 0x44020358 = 0x420000 + WROTE 0x4402035c = 0x20010db8 + WROTE 0x44020380 = 0x0000 + WROTE 0x44020384 = 0x0000 + WROTE 0x44020388 = 0x40000000 + WROTE 0x4402038c = 0x0001 + READ 0x44020344 = 0x0001 + WROTE 0x44020340 = 0x0001 + READ 0x44020344 = 0x0001 + READ 0x44020344 = 0x0001 + success + >> + >> table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477352206378 => 64 0 0 0 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)] + action_name = TopPipe.realmain.set_egress_port + field_vals = [1, '64', '0', '0', '0', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020350 = 0xa00002a + WROTE 0x44020354 = 0x0000 + WROTE 0x44020358 = 0x420000 + WROTE 0x4402035c = 0x20010db8 + WROTE 0x44020380 = 0x0000 + WROTE 0x44020384 = 0x0000 + WROTE 0x44020388 = 0x40000000 + WROTE 0x4402038c = 0x0001 + READ 0x44020344 = 0x0001 + WROTE 0x44020340 = 0x0001 + READ 0x44020344 = 0x0001 + READ 0x44020344 = 0x0001 + success + >> + + >> table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960998550477352206378 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'v6_src', 128), (u'v4_dst', 32), (u'nat64_prefix', 128), (u'table_id', 16)] + action_name = TopPipe.realmain.nat64_static + field_vals = [2, '42540766411362381960998550477184434176', '167772160', '42540766411362381960998550477184434176', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020050 = 0xa00002a + WROTE 0x44020054 = 0x0000 + WROTE 0x44020058 = 0x420000 + WROTE 0x4402005c = 0x20010db8 + WROTE 0x44020080 = 0x0000 + WROTE 0x44020084 = 0x0000 + WROTE 0x44020088 = 0x0000 + WROTE 0x4402008c = 0xdb80042 + WROTE 0x44020090 = 0x2001 + WROTE 0x44020094 = 0x0a00 + WROTE 0x44020098 = 0x0000 + WROTE 0x4402009c = 0x0000 + WROTE 0x440200a0 = 0xdb80042 + WROTE 0x440200a4 = 0x22001 + READ 0x44020044 = 0x0001 + WROTE 0x44020040 = 0x0001 + READ 0x44020044 = 0x0001 + READ 0x44020044 = 0x0001 + success + >> + + >> table_cam_add_entry realmain_nat46_0 realmain.nat46_static 167772226 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0 + fields = [(u'hit', 1), (u'action_run', 3), (u'v6_src', 128), (u'v4_dst', 32), (u'nat64_prefix', 128), (u'table_id', 16)] + action_name = TopPipe.realmain.nat46_static + field_vals = [2, '42540766411362381960998550477184434176', '167772160', '42540766411362381960998550477184434176', '0'] + CAM_Init_ValidateContext() - done + WROTE 0x44020150 = 0xa000042 + WROTE 0x44020180 = 0x0000 + WROTE 0x44020184 = 0x0000 + WROTE 0x44020188 = 0x0000 + WROTE 0x4402018c = 0xdb80042 + WROTE 0x44020190 = 0x2001 + WROTE 0x44020194 = 0x0a00 + WROTE 0x44020198 = 0x0000 + WROTE 0x4402019c = 0x0000 + WROTE 0x440201a0 = 0xdb80042 + WROTE 0x440201a4 = 0x22001 + READ 0x44020144 = 0x0001 + WROTE 0x44020140 = 0x0001 + READ 0x44020144 = 0x0001 + READ 0x44020144 = 0x0001 + success + >> + + #+END_CENTER +**** TODO Testing translation: v4->v6 +#+BEGIN_CENTER +nico@ESPRIMO-P956:~/master-thesis/bin$ ./socat-listen-tcp-v6 +nico@ESPRIMO-P956:~/master-thesis$ ./bin/sniff-intf.sh enp2s0f0 netfpga-nat64 +nico@ESPRIMO-P956:~/master-thesis$ ./bin/sniff-intf.sh enp2s0f1 netfpga-nat64 +nico@ESPRIMO-P956:~/master-thesis/bin$ ./socat-connect-tcp-v4 + +#+END_CENTER + +Result: +#+BEGIN_CENTER +0 packets dropped by kernel +0 packets dropped by kernel + +#+END_CENTER +Problem: something removed the ipv4 address on the test host (again) + + ** References / Follow up *** RFC 791 IPv4 https://tools.ietf.org/html/rfc791 *** RFC 792 ICMP https://tools.ietf.org/html/rfc792