//-
// Copyright (c) 2015 Noa Zilberman
// All rights reserved.
//
// This software was developed by Stanford University and the University of Cambridge Computer Laboratory 
// under National Science Foundation under Grant No. CNS-0855268,
// the University of Cambridge Computer Laboratory under EPSRC INTERNET Project EP/H040536/1 and
// by the University of Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-11-C-0249 ("MRC2"), 
// as part of the DARPA MRC research programme.
//
//  File:
//        axi_clocking.v
//
//  Module:
//        axi_clocking
//
//  Author: Noa Zilberman
//
//  Description:
//        Sharable clocking resources for NetFPGA SUME
//
//
// @NETFPGA_LICENSE_HEADER_START@
//
// Licensed to NetFPGA C.I.C. (NetFPGA) under one or more contributor
// license agreements.  See the NOTICE file distributed with this work for
// additional information regarding copyright ownership.  NetFPGA licenses this
// file to you under the NetFPGA Hardware-Software License, Version 1.0 (the
// "License"); you may not use this file except in compliance with the
// License.  You may obtain a copy of the License at:
//
//   http://www.netfpga-cic.org
//
// Unless required by applicable law or agreed to in writing, Work distributed
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations under the License.
//
// @NETFPGA_LICENSE_HEADER_END@
//

`timescale 1ps / 1ps
(* dont_touch = "yes" *)
module axi_clocking
  (
   // Inputs
   input clk_in_p,
   input clk_in_n,
   input resetn,
   // Status outputs
   
   // IBUFDS 200MHz  
   output locked,  
   output clk_200 
   
   );

  // Signal declarations
  wire s_axi_dcm_aclk0;
  wire clkfbout;

  // 200MHz differencial into single-rail     
  IBUFDS clkin1_buf
   (.O  (clkin1),
    .I  (clk_in_p),
    .IB (clk_in_n)
    );


clk_wiz_ip clk_wiz_i
   (
   // Clock in ports
    .clk_in1(clkin1),      // input clk_in1
    // Clock out ports
    .clk_out1(clk_200),     // output clk_out1
    // Status and control signals
    .resetn(resetn), // input resetn
    .locked(locked));
endmodule