diff --git a/type/__unbound/files/unbound.conf.sh b/type/__unbound/files/unbound.conf.sh index 39443d8..05cf3fa 100755 --- a/type/__unbound/files/unbound.conf.sh +++ b/type/__unbound/files/unbound.conf.sh @@ -1,1039 +1,71 @@ -#!/bin/sh - -module_config="validator iterator" -if [ -n "$DNS64_PREFIX" ]; then - module_config="dns64 $module_config" -fi - -generate_interface() { - for i in $INTERFACES; do - echo " interface: $i" - done -} - -generate_access_control() { - echo "$ACCESS_CONTROLS" | while read -r entry; do - echo " access-control: $entry" - done -} - -generate_forward_addr() { - for addr in $FORWARD_ADDRS; do - echo " forward-addr: $addr" - done -} - -generate_local_data() { - IFS=' -' - for entry in $LOCAL_DATA; do - echo " local-data: \"$entry\"" - done -} - -generate_dns64_prefix() { - if [ -n "$DNS64_PREFIX" ]; then - echo " dns64-prefix: $DNS64_PREFIX" - fi -} +#!/bin/sh -e +# Generates a configuration file for unbound(8). cat << EOF -# -# THIS FILE HAS BEEN GENERATED BY CDIST, DO NOT EDIT BY HAND. -# -# See unbound.conf(5) man page, version 1.9.1. -# -# this is a comment. - -#Use this to include other text into the file. -#include: "otherfile.conf" - -# The server clause sets the main parameters. +# Configuration file for the ${__object_id:?} unbound(8) instance. +# Generated by cdist. DNE: your changes will be overwritten. server: - # whitespace is not necessary, but looks cleaner. - - # verbosity number, 0 is least verbose. 1 is default. - verbosity: 1 - - # print statistics to the log (for every thread) every N seconds. - # Set to "" or 0 to disable. Default is disabled. - # statistics-interval: 0 - - # enable shm for stats, default no. if you enable also enable - # statistics-interval, every time it also writes stats to the - # shared memory segment keyed with shm-key. - # shm-enable: no - - # shm for stats uses this key, and key+1 for the shared mem segment. - # shm-key: 11777 - - # enable cumulative statistics, without clearing them after printing. - # statistics-cumulative: no - - # enable extended statistics (query types, answer codes, status) - # printed from unbound-control. default off, because of speed. - # extended-statistics: no - - # number of threads to create. 1 disables threading. - # num-threads: 1 - - # specify the interfaces to answer queries from by ip-address. - # The default is to listen to localhost (127.0.0.1 and ::1). - # specify 0.0.0.0 and ::0 to bind to all available interfaces. - # specify every interface[@port] on a new 'interface:' labelled line. - # The listen interfaces are not changed on reload, only on restart. - # interface: 192.0.2.153 - # interface: 192.0.2.154 - # interface: 192.0.2.154@5003 - # interface: 2001:DB8::5 -$(generate_interface) - - # enable this feature to copy the source address of queries to reply. - # Socket options are not supported on all platforms. experimental. - # interface-automatic: no - - # port to answer queries from - # port: 53 - - # specify the interfaces to send outgoing queries to authoritative - # server from by ip-address. If none, the default (all) interface - # is used. Specify every interface on a 'outgoing-interface:' line. - # outgoing-interface: 192.0.2.153 - # outgoing-interface: 2001:DB8::5 - # outgoing-interface: 2001:DB8::6 - - # Specify a netblock to use remainder 64 bits as random bits for - # upstream queries. Uses freebind option (Linux). - # outgoing-interface: 2001:DB8::/64 - # Also (Linux:) ip -6 addr add 2001:db8::/64 dev lo - # And: ip -6 route add local 2001:db8::/64 dev lo - # And set prefer-ip6: yes to use the ip6 randomness from a netblock. - # Set this to yes to prefer ipv6 upstream servers over ipv4. - # prefer-ip6: no - - # number of ports to allocate per thread, determines the size of the - # port range that can be open simultaneously. About double the - # num-queries-per-thread, or, use as many as the OS will allow you. - # outgoing-range: 4096 - - # permit unbound to use this port number or port range for - # making outgoing queries, using an outgoing interface. - # outgoing-port-permit: 32768 - - # deny unbound the use this of port number or port range for - # making outgoing queries, using an outgoing interface. - # Use this to make sure unbound does not grab a UDP port that some - # other server on this computer needs. The default is to avoid - # IANA-assigned port numbers. - # If multiple outgoing-port-permit and outgoing-port-avoid options - # are present, they are processed in order. - # outgoing-port-avoid: "3200-3208" - - # number of outgoing simultaneous tcp buffers to hold per thread. - # outgoing-num-tcp: 10 - - # number of incoming simultaneous tcp buffers to hold per thread. - # incoming-num-tcp: 10 - - # buffer size for UDP port 53 incoming (SO_RCVBUF socket option). - # 0 is system default. Use 4m to catch query spikes for busy servers. - # so-rcvbuf: 0 - - # buffer size for UDP port 53 outgoing (SO_SNDBUF socket option). - # 0 is system default. Use 4m to handle spikes on very busy servers. - # so-sndbuf: 0 - - # use SO_REUSEPORT to distribute queries over threads. - # so-reuseport: yes - - # use IP_TRANSPARENT so the interface: addresses can be non-local - # and you can config non-existing IPs that are going to work later on - # (uses IP_BINDANY on FreeBSD). - # ip-transparent: no - - # use IP_FREEBIND so the interface: addresses can be non-local - # and you can bind to nonexisting IPs and interfaces that are down. - # Linux only. On Linux you also have ip-transparent that is similar. - # ip-freebind: no - - # EDNS reassembly buffer to advertise to UDP peers (the actual buffer - # is set with msg-buffer-size). 1472 can solve fragmentation (timeouts) - # edns-buffer-size: 4096 - - # Maximum UDP response size (not applied to TCP response). - # Suggested values are 512 to 4096. Default is 4096. 65536 disables it. - # max-udp-size: 4096 - - # max memory to use for stream(tcp and tls) waiting result buffers. - # stream-wait-size: 4m - - # buffer size for handling DNS data. No messages larger than this - # size can be sent or received, by UDP or TCP. In bytes. - # msg-buffer-size: 65552 - - # the amount of memory to use for the message cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # msg-cache-size: 4m - - # the number of slabs to use for the message cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # msg-cache-slabs: 4 - - # the number of queries that a thread gets to service. - # num-queries-per-thread: 1024 - - # if very busy, 50% queries run to completion, 50% get timeout in msec - # jostle-timeout: 200 - - # msec to wait before close of port on timeout UDP. 0 disables. - # delay-close: 0 - - # msec for waiting for an unknown server to reply. Increase if you - # are behind a slow satellite link, to eg. 1128. - # unknown-server-time-limit: 376 - - # the amount of memory to use for the RRset cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # rrset-cache-size: 4m - - # the number of slabs to use for the RRset cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # rrset-cache-slabs: 4 - - # the time to live (TTL) value lower bound, in seconds. Default 0. - # If more than an hour could easily give trouble due to stale data. - # cache-min-ttl: 0 - - # the time to live (TTL) value cap for RRsets and messages in the - # cache. Items are not cached for longer. In seconds. - # cache-max-ttl: 86400 - - # the time to live (TTL) value cap for negative responses in the cache - # cache-max-negative-ttl: 3600 - - # the time to live (TTL) value for cached roundtrip times, lameness and - # EDNS version information for hosts. In seconds. - # infra-host-ttl: 900 - - # minimum wait time for responses, increase if uplink is long. In msec. - # infra-cache-min-rtt: 50 - - # the number of slabs to use for the Infrastructure cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # infra-cache-slabs: 4 - - # the maximum number of hosts that are cached (roundtrip, EDNS, lame). - # infra-cache-numhosts: 10000 - - # define a number of tags here, use with local-zone, access-control. - # repeat the define-tag statement to add additional tags. - # define-tag: "tag1 tag2 tag3" - - # Enable IPv4, "yes" or "no". - do-ip4: $DO_IP4 - - # Enable IPv6, "yes" or "no". - do-ip6: $DO_IP6 - - # Enable UDP, "yes" or "no". - # do-udp: yes - - # Enable TCP, "yes" or "no". - # do-tcp: yes - - # upstream connections use TCP only (and no UDP), "yes" or "no" - # useful for tunneling scenarios, default no. - # tcp-upstream: no - - # upstream connections also use UDP (even if do-udp is no). - # useful if if you want UDP upstream, but don't provide UDP downstream. - # udp-upstream-without-downstream: no - - # Maximum segment size (MSS) of TCP socket on which the server - # responds to queries. Default is 0, system default MSS. - # tcp-mss: 0 - - # Maximum segment size (MSS) of TCP socket for outgoing queries. - # Default is 0, system default MSS. - # outgoing-tcp-mss: 0 - - # Idle TCP timeout, connection closed in milliseconds - # tcp-idle-timeout: 30000 - - # Enable EDNS TCP keepalive option. - # edns-tcp-keepalive: no - - # Timeout for EDNS TCP keepalive, in msec. - # edns-tcp-keepalive-timeout: 120000 - - # Use systemd socket activation for UDP, TCP, and control sockets. - # use-systemd: no - - # Detach from the terminal, run in background, "yes" or "no". - # Set the value to "no" when unbound runs as systemd service. - # do-daemonize: yes - - # control which clients are allowed to make (recursive) queries - # to this server. Specify classless netblocks with /size and action. - # By default everything is refused, except for localhost. - # Choose deny (drop message), refuse (polite error reply), - # allow (recursive ok), allow_setrd (recursive ok, rd bit is forced on), - # allow_snoop (recursive and nonrecursive ok) - # deny_non_local (drop queries unless can be answered from local-data) - # refuse_non_local (like deny_non_local but polite error reply). - # access-control: 0.0.0.0/0 refuse - # access-control: 127.0.0.0/8 allow - # access-control: ::0/0 refuse - # access-control: ::1 allow - # access-control: ::ffff:127.0.0.1 allow -$(generate_access_control) - - # tag access-control with list of tags (in "" with spaces between) - # Clients using this access control element use localzones that - # are tagged with one of these tags. - # access-control-tag: 192.0.2.0/24 "tag2 tag3" - - # set action for particular tag for given access control element - # if you have multiple tag values, the tag used to lookup the action - # is the first tag match between access-control-tag and local-zone-tag - # where "first" comes from the order of the define-tag values. - # access-control-tag-action: 192.0.2.0/24 tag3 refuse - - # set redirect data for particular tag for access control element - # access-control-tag-data: 192.0.2.0/24 tag2 "A 127.0.0.1" - - # Set view for access control element - # access-control-view: 192.0.2.0/24 viewname - - # if given, a chroot(2) is done to the given directory. - # i.e. you can chroot to the working directory, for example, - # for extra security, but make sure all files are in that directory. - # - # If chroot is enabled, you should pass the configfile (from the - # commandline) as a full path from the original root. After the - # chroot has been performed the now defunct portion of the config - # file path is removed to be able to reread the config after a reload. - # - # All other file paths (working dir, logfile, roothints, and - # key files) can be specified in several ways: - # o as an absolute path relative to the new root. - # o as a relative path to the working directory. - # o as an absolute path relative to the original root. - # In the last case the path is adjusted to remove the unused portion. - # - # The pid file can be absolute and outside of the chroot, it is - # written just prior to performing the chroot and dropping permissions. - # - # Additionally, unbound may need to access /dev/random (for entropy). - # How to do this is specific to your OS. - # - # If you give "" no chroot is performed. The path must not end in a /. - # chroot: "" - - # if given, user privileges are dropped (after binding port), - # and the given username is assumed. Default is user "unbound". - # If you give "" no privileges are dropped. - # username: "unbound" - - # the working directory. The relative files in this config are - # relative to this directory. If you give "" the working directory - # is not changed. - # If you give a server: directory: dir before include: file statements - # then those includes can be relative to the working directory. - # directory: "" - - # the log file, "" means log to stderr. - # Use of this option sets use-syslog to "no". - # logfile: "" - - # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to - # log to. If yes, it overrides the logfile. - # use-syslog: yes - - # Log identity to report. if empty, defaults to the name of argv[0] - # (usually "unbound"). - # log-identity: "" - - # print UTC timestamp in ascii to logfile, default is epoch in seconds. - # log-time-ascii: no - - # print one line with time, IP, name, type, class for every query. - # log-queries: no - - # print one line per reply, with time, IP, name, type, class, rcode, - # timetoresolve, fromcache and responsesize. - # log-replies: no - - # log with tag 'query' and 'reply' instead of 'info' for - # filtering log-queries and log-replies from the log. - # log-tag-queryreply: no - - # log the local-zone actions, like local-zone type inform is enabled - # also for the other local zone types. - # log-local-actions: no - - # print log lines that say why queries return SERVFAIL to clients. - # log-servfail: no - - # file to read root hints from. - # get one from https://www.internic.net/domain/named.cache - root-hints: /usr/share/dns-root-hints/named.root - - # enable to not answer id.server and hostname.bind queries. - # hide-identity: no - - # enable to not answer version.server and version.bind queries. - # hide-version: no - - # enable to not answer trustanchor.unbound queries. - # hide-trustanchor: no - - # the identity to report. Leave "" or default to return hostname. - # identity: "" - - # the version to report. Leave "" or default to return package version. - # version: "" - - # the target fetch policy. - # series of integers describing the policy per dependency depth. - # The number of values in the list determines the maximum dependency - # depth the recursor will pursue before giving up. Each integer means: - # -1 : fetch all targets opportunistically, - # 0: fetch on demand, - # positive value: fetch that many targets opportunistically. - # Enclose the list of numbers between quotes (""). - # target-fetch-policy: "3 2 1 0 0" - - # Harden against very small EDNS buffer sizes. - # harden-short-bufsize: no - - # Harden against unseemly large queries. - # harden-large-queries: no - - # Harden against out of zone rrsets, to avoid spoofing attempts. - # harden-glue: yes - - # Harden against receiving dnssec-stripped data. If you turn it - # off, failing to validate dnskey data for a trustanchor will - # trigger insecure mode for that zone (like without a trustanchor). - # Default on, which insists on dnssec data for trust-anchored zones. - # harden-dnssec-stripped: yes - - # Harden against queries that fall under dnssec-signed nxdomain names. - # harden-below-nxdomain: yes - - # Harden the referral path by performing additional queries for - # infrastructure data. Validates the replies (if possible). - # Default off, because the lookups burden the server. Experimental - # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. - # harden-referral-path: no - - # Harden against algorithm downgrade when multiple algorithms are - # advertised in the DS record. If no, allows the weakest algorithm - # to validate the zone. - # harden-algo-downgrade: no - - # Sent minimum amount of information to upstream servers to enhance - # privacy. Only sent minimum required labels of the QNAME and set QTYPE - # to A when possible. - # qname-minimisation: yes - - # QNAME minimisation in strict mode. Do not fall-back to sending full - # QNAME to potentially broken nameservers. A lot of domains will not be - # resolvable when this option in enabled. - # This option only has effect when qname-minimisation is enabled. - # qname-minimisation-strict: no - - # Aggressive NSEC uses the DNSSEC NSEC chain to synthesize NXDOMAIN - # and other denials, using information from previous NXDOMAINs answers. - # aggressive-nsec: no - - # Use 0x20-encoded random bits in the query to foil spoof attempts. - # This feature is an experimental implementation of draft dns-0x20. - # use-caps-for-id: no - - # Domains (and domains in them) without support for dns-0x20 and - # the fallback fails because they keep sending different answers. - # caps-whitelist: "licdn.com" - # caps-whitelist: "senderbase.org" - - # Enforce privacy of these addresses. Strips them away from answers. - # It may cause DNSSEC validation to additionally mark it as bogus. - # Protects against 'DNS Rebinding' (uses browser as network proxy). - # Only 'private-domain' and 'local-data' names are allowed to have - # these private addresses. No default. - # private-address: 10.0.0.0/8 - # private-address: 172.16.0.0/12 - # private-address: 192.168.0.0/16 - # private-address: 169.254.0.0/16 - # private-address: fd00::/8 - # private-address: fe80::/10 - # private-address: ::ffff:0:0/96 - - # Allow the domain (and its subdomains) to contain private addresses. - # local-data statements are allowed to contain private addresses too. - # private-domain: "example.com" - - # If nonzero, unwanted replies are not only reported in statistics, - # but also a running total is kept per thread. If it reaches the - # threshold, a warning is printed and a defensive action is taken, - # the cache is cleared to flush potential poison out of it. - # A suggested value is 10000000, the default is 0 (turned off). - # unwanted-reply-threshold: 0 - - # Do not query the following addresses. No DNS queries are sent there. - # List one address per entry. List classless netblocks with /size, - # do-not-query-address: 127.0.0.1/8 - # do-not-query-address: ::1 - - # if yes, the above default do-not-query-address entries are present. - # if no, localhost can be queried (for testing and debugging). - # do-not-query-localhost: yes - - # if yes, perform prefetching of almost expired message cache entries. - # prefetch: no - - # if yes, perform key lookups adjacent to normal lookups. - # prefetch-key: no - - # deny queries of type ANY with an empty response. - # deny-any: no - - # if yes, Unbound rotates RRSet order in response. - # rrset-roundrobin: no - - # if yes, Unbound doesn't insert authority/additional sections - # into response messages when those sections are not required. - # minimal-responses: yes - - # true to disable DNSSEC lameness check in iterator. - # disable-dnssec-lame-check: no - - # module configuration of the server. A string with identifiers - # separated by spaces. Syntax: "[dns64] [validator] iterator" - # most modules have to be listed at the beginning of the line, - # except cachedb(just before iterator), and python (at the beginning, - # or, just before the iterator). - module-config: "$module_config" - - # File with trusted keys, kept uptodate using RFC5011 probes, - # initial file like trust-anchor-file, then it stores metadata. - # Use several entries, one per domain name, to track multiple zones. - # - # If you want to perform DNSSEC validation, run unbound-anchor before - # you start unbound (i.e. in the system boot scripts). And enable: - # Please note usage of unbound-anchor root anchor is at your own risk - # and under the terms of our LICENSE (see that file in the source). - # auto-trust-anchor-file: "" - - # trust anchor signaling sends a RFC8145 key tag query after priming. - # trust-anchor-signaling: yes - - # Root key trust anchor sentinel (draft-ietf-dnsop-kskroll-sentinel) - # root-key-sentinel: yes - - # File with DLV trusted keys. Same format as trust-anchor-file. - # There can be only one DLV configured, it is trusted from root down. - # DLV is going to be decommissioned. Please do not use it any more. - # dlv-anchor-file: "dlv.isc.org.key" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. - # Zone file format, with DS and DNSKEY entries. - # Note this gets out of date, use auto-trust-anchor-file please. - trust-anchor-file: "/usr/share/dnssec-root/trusted-key.key" - - # Trusted key for validation. DS or DNSKEY. specify the RR on a - # single line, surrounded by "". TTL is ignored. class is IN default. - # Note this gets out of date, use auto-trust-anchor-file please. - # (These examples are from August 2007 and may not be valid anymore). - # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" - # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. Like trust-anchor-file - # but has a different file format. Format is BIND-9 style format, - # the trusted-keys { name flag proto algo "key"; }; clauses are read. - # you need external update procedures to track changes in keys. - # trusted-keys-file: "" - - # Ignore chain of trust. Domain is treated as insecure. - # domain-insecure: "example.com" - - # Override the date for validation with a specific fixed date. - # Do not set this unless you are debugging signature inception - # and expiration. "" or "0" turns the feature off. -1 ignores date. - # val-override-date: "" - - # The time to live for bogus data, rrsets and messages. This avoids - # some of the revalidation, until the time interval expires. in secs. - # val-bogus-ttl: 60 - - # The signature inception and expiration dates are allowed to be off - # by 10% of the signature lifetime (expir-incep) from our local clock. - # This leeway is capped with a minimum and a maximum. In seconds. - # val-sig-skew-min: 3600 - # val-sig-skew-max: 86400 - - # Should additional section of secure message also be kept clean of - # unsecure data. Useful to shield the users of this validator from - # potential bogus data in the additional section. All unsigned data - # in the additional section is removed from secure messages. - # val-clean-additional: yes - - # Turn permissive mode on to permit bogus messages. Thus, messages - # for which security checks failed will be returned to clients, - # instead of SERVFAIL. It still performs the security checks, which - # result in interesting log files and possibly the AD bit in - # replies if the message is found secure. The default is off. - # val-permissive-mode: no - - # Ignore the CD flag in incoming queries and refuse them bogus data. - # Enable it if the only clients of unbound are legacy servers (w2008) - # that set CD but cannot validate themselves. - # ignore-cd-flag: no - - # Serve expired responses from cache, with TTL 0 in the response, - # and then attempt to fetch the data afresh. - # serve-expired: no - # - # Limit serving of expired responses to configured seconds after - # expiration. 0 disables the limit. - # serve-expired-ttl: 0 - # - # Set the TTL of expired records to the serve-expired-ttl value after a - # failed attempt to retrieve the record from upstream. This makes sure - # that the expired records will be served as long as there are queries - # for it. - # serve-expired-ttl-reset: no - - # Have the validator log failed validations for your diagnosis. - # 0: off. 1: A line per failed user query. 2: With reason and bad IP. - # val-log-level: 0 - - # It is possible to configure NSEC3 maximum iteration counts per - # keysize. Keep this table very short, as linear search is done. - # A message with an NSEC3 with larger count is marked insecure. - # List in ascending order the keysize and count values. - # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" - - # instruct the auto-trust-anchor-file probing to add anchors after ttl. - # add-holddown: 2592000 # 30 days - - # instruct the auto-trust-anchor-file probing to del anchors after ttl. - # del-holddown: 2592000 # 30 days - - # auto-trust-anchor-file probing removes missing anchors after ttl. - # If the value 0 is given, missing anchors are not removed. - # keep-missing: 31622400 # 366 days - - # debug option that allows very small holddown times for key rollover, - # otherwise the RFC mandates probe intervals must be at least 1 hour. - # permit-small-holddown: no - - # the amount of memory to use for the key cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # key-cache-size: 4m - - # the number of slabs to use for the key cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # key-cache-slabs: 4 - - # the amount of memory to use for the negative cache (used for DLV). - # plain value in bytes or you can append k, m or G. default is "1Mb". - # neg-cache-size: 1m - - # By default, for a number of zones a small default 'nothing here' - # reply is built-in. Query traffic is thus blocked. If you - # wish to serve such zone you can unblock them by uncommenting one - # of the nodefault statements below. - # You may also have to use domain-insecure: zone to make DNSSEC work, - # unless you have your own trust anchors for this zone. - # local-zone: "localhost." nodefault - # local-zone: "127.in-addr.arpa." nodefault - # local-zone: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." nodefault - # local-zone: "onion." nodefault - # local-zone: "test." nodefault - # local-zone: "invalid." nodefault - # local-zone: "10.in-addr.arpa." nodefault - # local-zone: "16.172.in-addr.arpa." nodefault - # local-zone: "17.172.in-addr.arpa." nodefault - # local-zone: "18.172.in-addr.arpa." nodefault - # local-zone: "19.172.in-addr.arpa." nodefault - # local-zone: "20.172.in-addr.arpa." nodefault - # local-zone: "21.172.in-addr.arpa." nodefault - # local-zone: "22.172.in-addr.arpa." nodefault - # local-zone: "23.172.in-addr.arpa." nodefault - # local-zone: "24.172.in-addr.arpa." nodefault - # local-zone: "25.172.in-addr.arpa." nodefault - # local-zone: "26.172.in-addr.arpa." nodefault - # local-zone: "27.172.in-addr.arpa." nodefault - # local-zone: "28.172.in-addr.arpa." nodefault - # local-zone: "29.172.in-addr.arpa." nodefault - # local-zone: "30.172.in-addr.arpa." nodefault - # local-zone: "31.172.in-addr.arpa." nodefault - # local-zone: "168.192.in-addr.arpa." nodefault - # local-zone: "0.in-addr.arpa." nodefault - # local-zone: "254.169.in-addr.arpa." nodefault - # local-zone: "2.0.192.in-addr.arpa." nodefault - # local-zone: "100.51.198.in-addr.arpa." nodefault - # local-zone: "113.0.203.in-addr.arpa." nodefault - # local-zone: "255.255.255.255.in-addr.arpa." nodefault - # local-zone: "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." nodefault - # local-zone: "d.f.ip6.arpa." nodefault - # local-zone: "8.e.f.ip6.arpa." nodefault - # local-zone: "9.e.f.ip6.arpa." nodefault - # local-zone: "a.e.f.ip6.arpa." nodefault - # local-zone: "b.e.f.ip6.arpa." nodefault - # local-zone: "8.b.d.0.1.0.0.2.ip6.arpa." nodefault - # And for 64.100.in-addr.arpa. to 127.100.in-addr.arpa. - - # If unbound is running service for the local host then it is useful - # to perform lan-wide lookups to the upstream, and unblock the - # long list of local-zones above. If this unbound is a dns server - # for a network of computers, disabled is better and stops information - # leakage of local lan information. - # unblock-lan-zones: no - - # The insecure-lan-zones option disables validation for - # these zones, as if they were all listed as domain-insecure. - # insecure-lan-zones: no - - # a number of locally served zones can be configured. - # local-zone: - # local-data: "" - # o deny serves local data (if any), else, drops queries. - # o refuse serves local data (if any), else, replies with error. - # o static serves local data, else, nxdomain or nodata answer. - # o transparent gives local data, but resolves normally for other names - # o redirect serves the zone data for any subdomain in the zone. - # o nodefault can be used to normally resolve AS112 zones. - # o typetransparent resolves normally for other types and other names - # o inform acts like transparent, but logs client IP address - # o inform_deny drops queries and logs client IP address - # o inform_redirect redirects queries and logs client IP address - # o always_transparent, always_refuse, always_nxdomain, resolve in - # that way but ignore local data for that name - # o noview breaks out of that view towards global local-zones. - # - # defaults are localhost address, reverse for 127.0.0.1 and ::1 - # and nxdomain for AS112 zones. If you configure one of these zones - # the default content is omitted, or you can omit it with 'nodefault'. - # - # If you configure local-data without specifying local-zone, by - # default a transparent local-zone is created for the data. - # - # You can add locally served data with - # local-zone: "local." static - # local-data: "mycomputer.local. IN A 192.0.2.51" - # local-data: 'mytext.local TXT "content of text record"' - # - # You can override certain queries with - # local-data: "adserver.example.com A 127.0.0.1" - # - # You can redirect a domain to a fixed address with - # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) - # local-zone: "example.com" redirect - # local-data: "example.com A 192.0.2.3" -$(generate_local_data) - # - # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". - # You can also add PTR records using local-data directly, but then - # you need to do the reverse notation yourself. - # local-data-ptr: "192.0.2.3 www.example.com" - - # tag a localzone with a list of tag names (in "" with spaces between) - # local-zone-tag: "example.com" "tag2 tag3" - - # add a netblock specific override to a localzone, with zone type - # local-zone-override: "example.com" 192.0.2.0/24 refuse - - # service clients over TLS (on the TCP sockets), with plain DNS inside - # the TLS stream. Give the certificate to use and private key. - # default is "" (disabled). requires restart to take effect. - # tls-service-key: "path/to/privatekeyfile.key" - # tls-service-pem: "path/to/publiccertfile.pem" - # tls-port: 853 - - # cipher setting for TLSv1.2 - # tls-ciphers: "DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256" - # cipher setting for TLSv1.3 - # tls-ciphersuites: "TLS_AES_128_GCM_SHA256:TLS_AES_128_CCM_8_SHA256:TLS_AES_128_CCM_SHA256:TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256" - - # Add the secret file for TLS Session Ticket. - # Secret file must be 80 bytes of random data. - # First key use to encrypt and decrypt TLS session tickets. - # Other keys use to decrypt only. - # requires restart to take effect. - # tls-session-ticket-keys: "path/to/secret_file1" - # tls-session-ticket-keys: "path/to/secret_file2" - - # request upstream over TLS (with plain DNS inside the TLS stream). - # Default is no. Can be turned on and off with unbound-control. - # tls-upstream: no - - # Certificates used to authenticate connections made upstream. - # tls-cert-bundle: "" - - # Add system certs to the cert bundle, from the Windows Cert Store - # tls-win-cert: no - - # Also serve tls on these port numbers (eg. 443, ...), by listing - # tls-additional-port: portno for each of the port numbers. - - # DNS64 prefix. Must be specified when DNS64 is use. - # Enable dns64 in module-config. Used to synthesize IPv6 from IPv4. - # dns64-prefix: $DNS64_PREFIX" - $(generate_dns64_prefix) - - # DNS64 ignore AAAA records for these domains and use A instead. - # dns64-ignore-aaaa: "example.com" - - # ratelimit for uncached, new queries, this limits recursion effort. - # ratelimiting is experimental, and may help against randomqueryflood. - # if 0(default) it is disabled, otherwise state qps allowed per zone. - # ratelimit: 0 - - # ratelimits are tracked in a cache, size in bytes of cache (or k,m). - # ratelimit-size: 4m - # ratelimit cache slabs, reduces lock contention if equal to cpucount. - # ratelimit-slabs: 4 - - # 0 blocks when ratelimited, otherwise let 1/xth traffic through - # ratelimit-factor: 10 - - # override the ratelimit for a specific domain name. - # give this setting multiple times to have multiple overrides. - # ratelimit-for-domain: example.com 1000 - # override the ratelimits for all domains below a domain name - # can give this multiple times, the name closest to the zone is used. - # ratelimit-below-domain: com 1000 - - # global query ratelimit for all ip addresses. - # feature is experimental. - # if 0(default) it is disabled, otherwise states qps allowed per ip address - # ip-ratelimit: 0 - - # ip ratelimits are tracked in a cache, size in bytes of cache (or k,m). - # ip-ratelimit-size: 4m - # ip ratelimit cache slabs, reduces lock contention if equal to cpucount. - # ip-ratelimit-slabs: 4 - - # 0 blocks when ip is ratelimited, otherwise let 1/xth traffic through - # ip-ratelimit-factor: 10 - - # Limit the number of connections simultaneous from a netblock - # tcp-connection-limit: 192.0.2.0/24 12 - - # select from the fastest servers this many times out of 1000. 0 means - # the fast server select is disabled. prefetches are not sped up. - # fast-server-permil: 0 - # the number of servers that will be used in the fast server selection. - # fast-server-num: 3 - - # Specific options for ipsecmod. unbound needs to be configured with - # --enable-ipsecmod for these to take effect. - # - # Enable or disable ipsecmod (it still needs to be defined in - # module-config above). Can be used when ipsecmod needs to be - # enabled/disabled via remote-control(below). - # ipsecmod-enabled: yes - # - # Path to executable external hook. It must be defined when ipsecmod is - # listed in module-config (above). - # ipsecmod-hook: "./my_executable" - # - # When enabled unbound will reply with SERVFAIL if the return value of - # the ipsecmod-hook is not 0. - # ipsecmod-strict: no - # - # Maximum time to live (TTL) for cached A/AAAA records with IPSECKEY. - # ipsecmod-max-ttl: 3600 - # - # Reply with A/AAAA even if the relevant IPSECKEY is bogus. Mainly used for - # testing. - # ipsecmod-ignore-bogus: no - # - # Domains for which ipsecmod will be triggered. If not defined (default) - # all domains are treated as being whitelisted. - # ipsecmod-whitelist: "example.com" - # ipsecmod-whitelist: "nlnetlabs.nl" - - -# Python config section. To enable: -# o use --with-pythonmodule to configure before compiling. -# o list python in the module-config string (above) to enable. -# It can be at the start, it gets validated results, or just before -# the iterator and process before DNSSEC validation. -# o and give a python-script to run. -python: - # Script file to load - # python-script: "/ubmodule-tst.py" - -# Remote control config section. -remote-control: - # Enable remote control with unbound-control(8) here. - # set up the keys and certificates with unbound-control-setup. - control-enable: $RC_ENABLE - - # what interfaces are listened to for remote control. - # give 0.0.0.0 and ::0 to listen to all interfaces. - # set to an absolute path to use a unix local name pipe, certificates - # are not used for that, so key and cert files need not be present. - # control-interface: 127.0.0.1 - control-interface: $RC_INTERFACE - - # port number for remote control operations. - # control-port: 8953 - - # for localhost, you can disable use of TLS by setting this to "no" - # For local sockets this option is ignored, and TLS is not used. - # control-use-cert: "yes" - - # unbound server key file. - server-key-file: "$RC_SERVER_KEY_FILE" - - # unbound server certificate file. - server-cert-file: "$RC_SERVER_CERT_FILE" - - # unbound-control key file. - control-key-file: "$RC_CONTROL_KEY_FILE" - - # unbound-control certificate file. - control-cert-file: "$RC_CONTROL_CERT_FILE" - -# Stub zones. -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of nameservers. list zero or more -# nameservers by hostname or by ipaddress. If you set stub-prime to yes, -# the list is treated as priming hints (default is no). -# With stub-first yes, it attempts without the stub if it fails. -# Consider adding domain-insecure: name and local-zone: name nodefault -# to the server: section if the stub is a locally served zone. -# stub-zone: -# name: "example.com" -# stub-addr: 192.0.2.68 -# stub-prime: no -# stub-first: no -# stub-tls-upstream: no -# stub-no-cache: no -# stub-zone: -# name: "example.org" -# stub-host: ns.example.com. - -# Forward zones -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of servers. These servers have to handle -# recursion to other nameservers. List zero or more nameservers by hostname -# or by ipaddress. Use an entry with name "." to forward all queries. -# If you enable forward-first, it attempts without the forward if it fails. -# forward-zone: -# name: "example.com" -# forward-addr: 192.0.2.68 -# forward-addr: 192.0.2.73@5355 # forward to port 5355. -# forward-first: no -# forward-tls-upstream: no -# forward-no-cache: no -# forward-zone: -# name: "example.org" -# forward-host: fwd.example.com - -forward-zone: - name: "." -$(generate_forward_addr) - -# Authority zones -# The data for these zones is kept locally, from a file or downloaded. -# The data can be served to downstream clients, or used instead of the -# upstream (which saves a lookup to the upstream). The first example -# has a copy of the root for local usage. The second serves example.org -# authoritatively. zonefile: reads from file (and writes to it if you also -# download it), master: fetches with AXFR and IXFR, or url to zonefile. -# With allow-notify: you can give additional (apart from masters) sources of -# notifies. -# auth-zone: -# name: "." -# master: 199.9.14.201 # b.root-servers.net -# master: 192.33.4.12 # c.root-servers.net -# master: 199.7.91.13 # d.root-servers.net -# master: 192.5.5.241 # f.root-servers.net -# master: 192.112.36.4 # g.root-servers.net -# master: 193.0.14.129 # k.root-servers.net -# master: 192.0.47.132 # xfr.cjr.dns.icann.org -# master: 192.0.32.132 # xfr.lax.dns.icann.org -# master: 2001:500:200::b # b.root-servers.net -# master: 2001:500:2::c # c.root-servers.net -# master: 2001:500:2d::d # d.root-servers.net -# master: 2001:500:2f::f # f.root-servers.net -# master: 2001:500:12::d0d # g.root-servers.net -# master: 2001:7fd::1 # k.root-servers.net -# master: 2620:0:2830:202::132 # xfr.cjr.dns.icann.org -# master: 2620:0:2d0:202::132 # xfr.lax.dns.icann.org -# fallback-enabled: yes -# for-downstream: no -# for-upstream: yes -# auth-zone: -# name: "example.org" -# for-downstream: yes -# for-upstream: yes -# zonefile: "example.org.zone" - -# Views -# Create named views. Name must be unique. Map views to requests using -# the access-control-view option. Views can contain zero or more local-zone -# and local-data options. Options from matching views will override global -# options. Global options will be used if no matching view is found. -# With view-first yes, it will try to answer using the global local-zone and -# local-data elements if there is no view specific match. -# view: -# name: "viewname" -# local-zone: "example.com" redirect -# local-data: "example.com A 192.0.2.3" -# local-data-ptr: "192.0.2.3 www.example.com" -# view-first: no -# view: -# name: "anotherview" -# local-zone: "example.com" refuse - -# DNSCrypt -# Caveats: -# 1. the keys/certs cannot be produced by unbound. You can use dnscrypt-wrapper -# for this: https://github.com/cofyc/dnscrypt-wrapper/blob/master/README.md#usage -# 2. dnscrypt channel attaches to an interface. you MUST set interfaces to -# listen on 'dnscrypt-port' with the follo0wing snippet: -# server: -# interface: 0.0.0.0@443 -# interface: ::0@443 -# -# Finally, 'dnscrypt' config has its own section. -# dnscrypt: -# dnscrypt-enable: yes -# dnscrypt-port: 443 -# dnscrypt-provider: 2.dnscrypt-cert.example.com. -# dnscrypt-secret-key: /path/unbound-conf/keys1/1.key -# dnscrypt-secret-key: /path/unbound-conf/keys2/1.key -# dnscrypt-provider-cert: /path/unbound-conf/keys1/1.cert -# dnscrypt-provider-cert: /path/unbound-conf/keys2/1.cert - -# CacheDB -# Enable external backend DB as auxiliary cache. Specify the backend name -# (default is "testframe", which has no use other than for debugging and -# testing) and backend-specific options. The 'cachedb' module must be -# included in module-config, just before the iterator module. -# cachedb: -# backend: "testframe" -# # secret seed string to calculate hashed keys -# secret-seed: "default" -# -# # For "redis" backend: -# # redis server's IP address or host name -# redis-server-host: 127.0.0.1 -# # redis server's TCP port -# redis-server-port: 6379 -# # timeout (in ms) for communication with the redis server -# redis-timeout: 100 EOF + +# Server logging +[ "$VERBOSITY" ] && printf "verbosity: %u\n" "$VERBOSITY" + +# Interfaces to bind to +[ "$PORT" ] && printf "port: %u\n" "$PORT" +if [ -f "${__object:?}/parameter/interface" ]; +then + while read -r intf; + do + printf "interface: %s\n" "$intf" + done < "${__object:?}/parameter/interface" +fi + +[ "$IP_TRANSPARENT" ] && printf "ip-transparent: yes\n" + +# Access control +if [ -f "${__object:?}/parameter/access-control" ]; +then + while read -r acl; + do + printf "access-control: %s\n" "$acl" + done < "${__object:?}/parameter/access-control" +fi + +# DNS64 +printf "module-config: \"%svalidator iterator\"\n" "${DNS64:+dns64 }" +[ "$PREFIX64" ] && printf "dns64-prefix: %s\n" "$PREFIX64" + +# Remote control +echo "remote-control:" +[ "$ENABLE_RC" ] && echo "control-enable: yes" +[ "$CONTROL_PORT" ] && printf "control-port: %u\n" "$CONTROL_PORT" + +if [ "$CONTROL_USE_CERTS" ]; +then + printf "server-key-file: %s\n" "${RC_SERVER_KEY_FILE:?}" + printf "server-cert-file: %s\n" "${RC_SERVER_CERT_FILE:?}" + printf "control-key-file: %s\n" "${RC_CONTROL_KEY_FILE:?}" + printf "control-cert-file: %s\n" "${RC_CONTROL_CERT_FILE:?}" +fi + +if [ -f "${__object:?}/parameter/control-interface" ]; +then + while read -r acl; + do + printf "control-interface: %s\n" "$acl" + done < "${__object:?}/parameter/control-interface" +fi + +# Forwarding recursive queries +if [ -f "${__object:?}/parameter/forward-zone" ]; +then + while read -r fdzne + do + printf "forward-zone:\n" + printf "name: %s\n" "$(echo "$fdzne" | cut -f1 -d',')" + echo "$fdzne" | cut -f 2- -d',' | tr ',' '\n' | while read -r addr; + do + printf "forward-addr: %s\n" "$addr" + done + done < "${__object:?}/parameter/forward-zone"; +fi diff --git a/type/__unbound/gencode-remote b/type/__unbound/gencode-remote index 7c271b7..d8d5f1c 100755 --- a/type/__unbound/gencode-remote +++ b/type/__unbound/gencode-remote @@ -1,16 +1,21 @@ #!/bin/sh +if ! [ -f "${__object:?}/parameter/control-use-certs" ]; +then + exit 0; +fi + UNBOUND_CERTS_DIR=/etc/unbound -if [ -f "$__object/parameter/enable-rc" ]; then +if [ -f "${__object:?}/parameter/enable-rc" ]; then echo "unbound-control-setup -d $UNBOUND_CERTS_DIR" echo "chown unbound:unbound $UNBOUND_CERTS_DIR/*.pem $UNBOUND_CERTS_DIR/*.key" fi cat << EOF if pgrep unbound; then - service unbound reload + service ${__object_id:?} reload else - service unbound start + service ${__object_id:?} start fi EOF diff --git a/type/__unbound/man.rst b/type/__unbound/man.rst index 350f1ea..0180db0 100644 --- a/type/__unbound/man.rst +++ b/type/__unbound/man.rst @@ -1,84 +1,116 @@ cdist-type__unbound(7) -=============================== +======================= NAME ---- -cdist-type__ungleich_unbound - unbound server deployment for ungleich +cdist-type__unbound - configure an instance of unbound, a DNS validating resolver. DESCRIPTION ----------- -This unbound (dns resolver and cache) deployment provides DNS64 and fetch -answers from specified upstrean DNS server. This is a singleton type. +This type writes the configuration and OpenRC init scripts to run an instance +of unbound. The most commonly used options for unbound are configurable through +flags. + +Note that this type is currently only implemented (and tested) on Alpine Linux. +Please contribute other implementations if you can. -REQUIRED PARAMETERS -------------------- -forward_addr - DNS servers used to lookup names, can be provided multiple times. It can be - either an IPv4 or IPv6 address but no domain name. OPTIONAL PARAMETERS ------------------- -interface - Interface to listen on, can be provided multiple times. Defaults to - '127.0.0.1' and '::1'. +verbosity + Control the `unbound.conf(5)` verbosity parameter. -access-control - Controls which clients are allowed queries to the unbound service (everything - but localhost is refused by default), can be provided multiple times. The - format is described in unbound.conf(5). +port + Control the `unbound.conf(5)` port parameter. -rc-interface - Address or path to socket used for remote control (see `--enable_control`. Defaults to `127.0.0.1`). - -local-data - Configure local data, which is served in reply to queries for it. Can be - specified multiple times. +control-port + Control the `unbound.conf(5)` control-port parameter. dns64-prefix - Enable DNS64 with specified prefix. + Control the `unbound.conf(5)` dns64-prefix parameter. + +OPTIONAL MULTIPLE PARAMETERS +---------------------------- +interface + Control the `unbound.conf(5)` interface parameter. Can be + given multiple times, will generate multiple `interface: + xxx` clauses. + +access-control + Control the `unbound.conf(5)` access-control parameter. Can be given + multiple times, will generate multiple `access-control` clauses. The format + is an IP block followed by an access-control keyword. + +control-interface + Control the `unbound.conf(5)` control-interface parameter. Can be given + mutltiple times, will generate multiple `control-interface` clauses. Note + that without the `enable-rc` boolean flags, remote control will not be + enabled. Note that if at least one control interfaces is not a local socket, + then you should enable the `control-use-certs` boolean flag to generate and + configure TLS certificates for use between `unbound(8)` and + `unbound-control(8)` + +forward-zone + Define a forward zone. Each zone is comprised of a name, which defines for + what domains this zone applies, and at least one DNS server to which the + queries should be forwarded. The format is a comma-separated list of values + where the first element is the name of the zone, and the following elements + are the IP addresses of the DNS servers; e.g. `example.com,1.2.3.4,4.3.2.1` BOOLEAN PARAMETERS ------------------ -disable-ip4 - Do not answer or issue queries over IPv4. Cannot be used alongside the - `--disable-ip6` flag. +ip-transparent + Control the `unbound.conf(5)` ip-transparent parameter. -disable-ip6 - Do not answer or issue queries over IPv6. Cannot be used alongside the - `--disable-ip4` flag. +dns64 + Enables the addition of the DNS64 module. enable-rc - Enable remote control (see `unbound-control(8)`). + Enable remote control. + +control-use-certs + Enable the generation using `unbound-control-setup(8)` of TLS certificates + for the interaction between `unbound(8)` and `unbound-control(8)`, as well as + their inclusion in the configuration file. + EXAMPLES -------- .. code-block:: sh - __ungleich_unbound \ - --interface '::0' \ - --dns64-prefix '2a0a:e5c0:2:10::/96' \ - --forward-addr '2a0a:e5c0:2:1::5' \ - --forward-addr '2a0a:e5c0:2:1::6' \ - --access-control '::0/0 deny' \ - --access-control '2a0a:e5c0::/29 allow' \ - --access-control '2a09:2940::/29 allow' \ - --ip6 + # Setup bird and open a BGP session. + __bird_core --router-id 198.51.100.4 + + require='__bird_core' __bird_bgp bgp4 \ + --description "a test IPv4 BGP instance" \ + --ipv4-export all \ + --ipv4-import all \ + --ipv6-export none \ + --ipv6-import none \ + --local-as 1234 \ + --local-ip 198.51.100.4 \ + --neighbor-as 4321 \ + --neighbor-ip 198.51.100.3 \ + --password hunter01 + SEE ALSO -------- -- `unbound.conf(5) `_ +`unbound(8)` +`unbound.conf(5)` +`unbound-control(8)` AUTHORS ------- -Timothée Floure +Joachim Desroches COPYING ------- -Copyright \(C) 2020 Timothée Floure. You can redistribute it +Copyright \(C) 2021 Joachim Desroches. You can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. diff --git a/type/__unbound/manifest b/type/__unbound/manifest index 1a23328..4955f41 100755 --- a/type/__unbound/manifest +++ b/type/__unbound/manifest @@ -1,6 +1,6 @@ -#!/bin/sh -e +#!/bin/sh -xe # -# 2020 Timothée Floure (timothee.floure@ungleich.ch) +# 2020 Joachim Desroches (joachim.desroches@epfl.ch) # # This file is part of cdist. # @@ -19,86 +19,97 @@ # -os=$(cat "$__global/explorer/os") +os=$(cat "${__global:?}/explorer/os") case "$os" in - alpine) - __package unbound --state present - ;; - *) - printf "Your operating system (%s) is currently not supported by this type (%s)\n" "$os" "${__type##*/}" >&2 - printf "Please contribute an implementation for it if you can.\n" >&2 - exit 1 - ;; +alpine) + __package unbound + openssl_package=openssl + ;; +*) + printf "%s is currently not supported by __unbound\n" "$os" >&2 + printf "Please contribute an implementation for it if you can.\n" >&2 + exit 1 + ;; esac -# Required parameters: -FORWARD_ADDRS=$(cat "$__object/parameter/forward-addr") -export FORWARD_ADDRS - # Optional parameters: -if [ -f "$__object/parameter/dns64-prefix" ]; then - DNS64_PREFIX=$(cat "$__object/parameter/dns64-prefix") - export DNS64_PREFIX -fi +[ -f "${__object:?}/parameter/verbosity" ] && { + VERBOSITY=$(cat "${__object:?}/parameter/verbosity") + export VERBOSITY +} -if [ -f "$__object/parameter/interface" ]; then - INTERFACES=$(cat "$__object/parameter/interface") - export INTERFACES -fi +[ -f "${__object:?}/parameter/port" ] && { + PORT=$(cat "${__object:?}/parameter/port") + export PORT +} -if [ -f "$__object/parameter/access-control" ]; then - ACCESS_CONTROLS=$(cat "$__object/parameter/access-control") - export ACCESS_CONTROLS -fi +[ -f "${__object:?}/parameter/control-port" ] && { + CONTROL_PORT=$(cat "${__object:?}/parameter/control-port") + export CONTROL_PORT +} -if [ -f "$__object/parameter/rc-interface" ]; then - RC_INTERFACE=$(cat "$__object/parameter/rc-interface") - export RC_INTERFACE -fi - -if [ -f "$__object/parameter/local-data" ]; then - LOCAL_DATA=$(cat "$__object/parameter/local-data") - export LOCAL_DATA -fi +[ -f "${__object:?}/parameter/dns64-prefix" ] && { + PREFIX64=$(cat "${__object:?}/parameter/dns64-prefix") + export PREFIX64 +} # Boolean parameters: -if [ -f "$__object/parameter/disable-ip4" ] && \ - [ -f "$__object/parameter/disable-ip6" ]; then - echo "--disable-ip4 and --disable-ip6 cannot be used at the same time." >&2 - exit 1 -fi +[ -f "${__object:?}/parameter/ip-transparent" ] && { + IP_TRANSPARENT=yes + export IP_TRANSPARENT +} -if [ -f "$__object/parameter/disable-ip4" ]; then - export DO_IP4='no' -else - export DO_IP4='yes' -fi +[ -f "${__object:?}/parameter/dns64" ] && { + DNS64=yes + export DNS64 +} -if [ -f "$__object/parameter/disable-ip6" ]; then - export DO_IP6='no' -else - export DO_IP6='yes' -fi +[ -f "${__object:?}/parameter/enable-rc" ] && { + ENABLE_RC=yes + export ENABLE_RC +} -if [ -f "$__object/parameter/enable-rc" ]; then - export RC_ENABLE='yes' -else - export RC_ENABLE='no' -fi +[ -f "${__object:?}/parameter/control-use-certs" ] && { + __package "$openssl_package" + CONTROL_USE_CERTS=yes + export CONTROL_USE_CERTS +} -# Certs for remote control: +# Certs for remote control, generated if --generate-certs is given. export RC_SERVER_KEY_FILE='/etc/unbound/unbound_server.key' export RC_SERVER_CERT_FILE='/etc/unbound/unbound_server.pem' export RC_CONTROL_KEY_FILE='/etc/unbound/unbound_control.key' export RC_CONTROL_CERT_FILE='/etc/unbound/unbound_control.pem' +# If object_id is different from 'unbound', we consider that we are launching a +# different instance of unbound and create the appropriate init service. +if [ "${__object_id:?}" != "unbound" ]; +then + __link "/etc/init.d/${__object_id:?}" \ + --type symbolic --source /etc/init.d/unbound + + # The unbound init service checks the proper configuration file but does not + # specify to load it, so we add a daemon configuration file. + __file "/etc/conf.d/${__object_id:?}" \ + --owner root --mode 0600 --source - <<- EOF + # Generated by cdist. + command_args="-c /etc/unbound/\$RC_SVCNAME.conf" + EOF + + require="__link/etc/init.d/${__object_id:?}" \ + __start_on_boot "${__object_id:?}" +else + __start_on_boot unbound +fi + + # Generate and deploy configuration files. -source_file="$__object/files/unbound.conf" -target_file="/etc/unbound/unbound.conf" +source_file="${__object:?}/files/unbound.conf" +target_file="/etc/unbound/${__object_id:?}.conf" mkdir -p "$__object/files" -"$__type/files/unbound.conf.sh" > "$source_file" +"${__type:?}/files/unbound.conf.sh" > "$source_file" require="__package/unbound" __file "$target_file" \ --source "$source_file" \ --owner root \ diff --git a/type/__unbound/parameter/boolean b/type/__unbound/parameter/boolean index f754fa2..2ce187e 100644 --- a/type/__unbound/parameter/boolean +++ b/type/__unbound/parameter/boolean @@ -1,3 +1,4 @@ -disable-ip6 -disable-ip4 +ip-transparent +dns64 enable-rc +control-use-certs diff --git a/type/__unbound/parameter/default/rc-interface b/type/__unbound/parameter/default/rc-interface deleted file mode 100644 index 7b9ad53..0000000 --- a/type/__unbound/parameter/default/rc-interface +++ /dev/null @@ -1 +0,0 @@ -127.0.0.1 diff --git a/type/__unbound/parameter/optional b/type/__unbound/parameter/optional index 69aeac1..26aa199 100644 --- a/type/__unbound/parameter/optional +++ b/type/__unbound/parameter/optional @@ -1,2 +1,4 @@ -rc-interface +verbosity +port +control-port dns64-prefix diff --git a/type/__unbound/parameter/optional_multiple b/type/__unbound/parameter/optional_multiple index 4d06e03..abfcf47 100644 --- a/type/__unbound/parameter/optional_multiple +++ b/type/__unbound/parameter/optional_multiple @@ -1,3 +1,4 @@ -access-control -local-data interface +access-control +control-interface +forward-zone diff --git a/type/__unbound/parameter/required_multiple b/type/__unbound/parameter/required_multiple deleted file mode 100644 index 74b99a2..0000000 --- a/type/__unbound/parameter/required_multiple +++ /dev/null @@ -1 +0,0 @@ -forward-addr diff --git a/type/__unbound/singleton b/type/__unbound/singleton deleted file mode 100644 index e69de29..0000000