Makefile

@@ -35,9 +35,9 @@ DOCS_SRC_DIR=./docs/src
 SPEECHDIR=./docs/speeches
 TYPEDIR=./cdist/conf/type
 
-SPHINXM=$(MAKE) -C $(DOCS_SRC_DIR) man
-SPHINXH=$(MAKE) -C $(DOCS_SRC_DIR) html
-SPHINXC=$(MAKE) -C $(DOCS_SRC_DIR) clean
+SPHINXM=make -C $(DOCS_SRC_DIR) man
+SPHINXH=make -C $(DOCS_SRC_DIR) html
+SPHINXC=make -C $(DOCS_SRC_DIR) clean
 
 ################################################################################
 # Manpages

bin/cdist-build-helper

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# 2011-2022 Nico Schottelius (nico-cdist at schottelius.org)
+# 2011-2013 Nico Schottelius (nico-cdist at schottelius.org)
 # 2016-2019 Darko Poljak (darko.poljak at gmail.com)
 #
 # This file is part of cdist.
@@ -534,8 +534,7 @@ eof
     ;;
 
     version)
-        target_version="$(git describe | sed 's/-/.dev/; s/-/+/g')"
-        printf "VERSION = \"%s\"\n" "${target_version}" > cdist/version.py
+        printf "VERSION = \"%s\"\n" "$(git describe)" > cdist/version.py
     ;;
 
     target-version)

cdist/argparse.py

@@ -472,6 +472,9 @@ def get_parsers():
     parser['info'].set_defaults(func=cdist.info.Info.commandline)
 
     # Scan = config + further
+    parser['scan'] = parser['sub'].add_parser('scan', add_help=False,
+                                              parents=[parser['config']])
+
     parser['scan'] = parser['sub'].add_parser(
             'scan', parents=[parser['loglevel'],
                              parser['beta'],
@@ -482,31 +485,19 @@ def get_parsers():
     parser['scan'].add_argument(
         '-m', '--mode', help='Which modes should run',
         action='append', default=[],
-        choices=['scan', 'trigger', 'config'])
-    parser['scan'].add_argument(
-        '--list',
-        action='store_true',
-        help='List the known hosts and exit')
+        choices=['scan', 'trigger'])
     parser['scan'].add_argument(
         '--config',
         action='store_true',
         help='Try to configure detected hosts')
     parser['scan'].add_argument(
-        '-I', '--interface',
-        action='append',  default=[], required=True,
+        '-I', '--interfaces',
+        action='append',  default=[],
         help='On which interfaces to scan/trigger')
     parser['scan'].add_argument(
-        '--name-mapper',
-        action='store',  default=None,
-        help='Map addresses to names, required for config mode')
-    parser['scan'].add_argument(
-        '-d', '--config-delay',
-        action='store',  default=3600, type=int,
-        help='How long (seconds) to wait before reconfiguring after last try')
-    parser['scan'].add_argument(
-        '-t', '--trigger-delay',
-        action='store',  default=5, type=int,
-        help='How long (seconds) to wait between ICMPv6 echo requests')
+        '-d', '--delay',
+        action='store',  default=3600,
+        help='How long to wait before reconfiguring after last try')
     parser['scan'].set_defaults(func=cdist.scan.commandline.commandline)
 
     for p in parser:

cdist/conf/explorer/lsb_codename

@@ -21,9 +21,6 @@
 
 set +e
 case "$("$__explorer/os")" in
-   checkpoint)
-       awk '{printf("%s\n", $(NF-1))}' /etc/cp-release
-   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_CODENAME")

cdist/conf/explorer/lsb_description

@@ -21,9 +21,6 @@
 
 set +e
 case "$("$__explorer/os")" in
-   checkpoint)
-       cat /etc/cp-release
-   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_DESCRIPTION")

cdist/conf/explorer/lsb_id

@@ -21,9 +21,6 @@
 
 set +e
 case "$("$__explorer/os")" in
-   checkpoint)
-       echo "CheckPoint"
-   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_ID")

cdist/conf/explorer/lsb_release

@@ -21,9 +21,6 @@
 
 set +e
 case "$("$__explorer/os")" in
-   checkpoint)
-       sed /etc/cp-release -e 's/.* R\([1-9][0-9]*\)\.[0-9]*$/\1/'
-   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_RELEASE")

cdist/conf/explorer/memory

@@ -27,18 +27,19 @@
 str2bytes() {
 	awk -F' ' '
 	$2 ==   "B" || !$2 { print $1 }
-	$2 ==  "kB" { printf "%.f\n", ($1 * 1000) }
-	$2 ==  "MB" { printf "%.f\n", ($1 * 1000 * 1000) }
-	$2 ==  "GB" { printf "%.f\n", ($1 * 1000 * 1000 * 1000) }
-	$2 ==  "TB" { printf "%.f\n", ($1 * 1000 * 1000 * 1000 * 1000) }
-	$2 == "kiB" { printf "%.f\n", ($1 * 1024) }
-	$2 == "MiB" { printf "%.f\n", ($1 * 1024 * 1024) }
-	$2 == "GiB" { printf "%.f\n", ($1 * 1024 * 1024 * 1024) }
-	$2 == "TiB" { printf "%.f\n", ($1 * 1024 * 1024 * 1024 * 1024) }'
+	$2 ==  "kB" { print $1 * 1000 }
+	$2 ==  "MB" { print $1 * 1000 * 1000 }
+	$2 ==  "GB" { print $1 * 1000 * 1000 * 1000 }
+	$2 ==  "TB" { print $1 * 1000 * 1000 * 1000 * 1000 }
+	$2 == "kiB" { print $1 * 1024 }
+	$2 == "MiB" { print $1 * 1024 * 1024 }
+	$2 == "GiB" { print $1 * 1024 * 1024 * 1024 }
+	$2 == "TiB" { print $1 * 1024 * 1024 * 1024 * 1024 }'
 }
 
 bytes2kib() {
-	awk '$0 > 0 { printf "%.f\n", ($0 / 1024) }'
+	set -- "$(cat)"
+	test "$1" -gt 0 && echo $(($1 / 1024))
 }
 
 

cdist/conf/explorer/os

@@ -116,13 +116,6 @@ if [ -f /etc/slackware-version ]; then
    exit 0
 fi
 
-# Appliances
-
-if grep -q '^Check Point Gaia' /etc/cp-release 2>/dev/null; then
-    echo checkpoint
-    exit 0
-fi
-
 uname_s="$(uname -s)"
 
 # Assume there is no tr on the client -> do lower case ourselves

cdist/conf/explorer/os_release

@@ -34,9 +34,5 @@ elif test -f /var/run/os-release
 then
 	# FreeBSD (created by os-release service)
 	cat /var/run/os-release
-elif test -f /etc/cp-release
-then
-        # Checkpoint firewall or management (actually linux based)
-        cat /etc/cp-release
 fi
 

cdist/conf/explorer/os_version

@@ -1,7 +1,6 @@
-#!/bin/sh -e
+#!/bin/sh
 #
 # 2010-2011 Nico Schottelius (nico-cdist at schottelius.org)
-# 2020-2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -18,22 +17,12 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
+#
 # All os variables are lower case
 #
+#
 
-rc_getvar() {
-   awk -F= -v varname="$2" '
-      function unquote(s) {
-         if (s ~ /^".*"$/ || s ~ /^'\''.*'\''$/)
-            return substr(s, 2, length(s) - 2)
-         else
-            return s
-      }
-      $1 == varname { print unquote(substr($0, index($0, "=") + 1)) }' "$1"
-}
-
-case $("${__explorer:?}/os")
-in
+case "$("$__explorer/os")" in
    amazon)
       cat /etc/system-release
    ;;
@@ -41,9 +30,6 @@ in
       # empty, but well...
       cat /etc/arch-release
    ;;
-   checkpoint)
-       awk '{version=$NF; printf("%s\n", substr(version, 2))}' /etc/cp-release
-    ;;
    debian)
       debian_version=$(cat /etc/debian_version)
       case $debian_version
@@ -57,8 +43,6 @@ in
               # sid versions don't have a number, so we decode by codename:
               case $(expr "$debian_version" : '\([a-z]\{1,\}\)/')
               in
-                  trixie) echo 12.99 ;;
-                  bookworm) echo 11.99 ;;
                   bullseye) echo 10.99 ;;
                   buster) echo 9.99 ;;
                   stretch) echo 8.99 ;;
@@ -66,7 +50,7 @@ in
                   wheezy) echo 6.99 ;;
                   squeeze) echo 5.99 ;;
                   lenny) echo 4.99 ;;
-                  *) echo 99.99 ;;
+                  *) exit 1
               esac
               ;;
           *)
@@ -75,24 +59,7 @@ in
       esac
    ;;
    devuan)
-      devuan_version=$(cat /etc/devuan_version)
-      case ${devuan_version}
-      in
-         (*/ceres)
-            # ceres versions don't have a number, so we decode by codename:
-            case ${devuan_version}
-            in
-               (daedalus/ceres) echo 4.99 ;;
-               (chimaera/ceres) echo 3.99 ;;
-               (beowulf/ceres) echo 2.99 ;;
-               (ascii/ceres) echo 1.99 ;;
-               (*) exit 1
-            esac
-            ;;
-         (*)
-            echo "${devuan_version}"
-            ;;
-      esac
+      cat /etc/devuan_version
    ;;
    fedora)
       cat /etc/fedora-release
@@ -101,20 +68,12 @@ in
       cat /etc/gentoo-release
    ;;
    macosx)
-      # NOTE: Legacy versions (< 10.3) do not support options
-      sw_vers | awk -F ':[ \t]+' '$1 == "ProductVersion" { print $2 }'
+      sw_vers -productVersion
    ;;
    freebsd)
       # Apparently uname -r is not a reliable way to get the patch level.
       # See: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=251743
-      if command -v freebsd-version >/dev/null 2>&1
-      then
-         # get userland version
-         freebsd-version -u
-      else
-         # fallback to kernel release for FreeBSD < 10.0
-         uname -r
-      fi
+      freebsd-version
    ;;
    *bsd|solaris)
       uname -r
@@ -139,20 +98,7 @@ in
       fi
    ;;
    ubuntu)
-      if command -v lsb_release >/dev/null 2>&1
-      then
       lsb_release -sr
-      elif test -r /usr/lib/os-release
-      then
-         # fallback to /usr/lib/os-release if lsb_release is not present (like
-         # on minimized Ubuntu installations)
-         rc_getvar /usr/lib/os-release VERSION_ID
-      elif test -r /etc/lsb-release
-      then
-         # extract DISTRIB_RELEASE= variable from /etc/lsb-release on old
-         # versions without /usr/lib/os-release.
-         rc_getvar /etc/lsb-release DISTRIB_RELEASE
-      fi
    ;;
    alpine)
        cat /etc/alpine-release

cdist/conf/type/__apt_backports/manifest

@@ -28,7 +28,6 @@
 #  lsb_release may not be given in all installations
 codename_os_release() {
     # shellcheck disable=SC1090
-    # shellcheck disable=SC1091
     . "$__global/explorer/os_release"
     printf "%s" "$VERSION_CODENAME"
 }

cdist/conf/type/__apt_mark/explorer/state

@@ -24,4 +24,4 @@ else
     name="$__object_id"
 fi
 
-apt-mark showhold | grep -q "^${name}$" && echo hold || echo unhold
+apt-mark showhold | grep -Fq "$name" && echo hold || echo unhold

cdist/conf/type/__apt_pin/man.rst

@@ -1,79 +0,0 @@
-cdist-type__apt_pin(7)
-======================
-
-NAME
-----
-cdist-type__apt_pin - Manage apt pinning rules
-
-
-DESCRIPTION
------------
-Adds/removes/edits rules to pin some packages to a specific distribution. Useful if using multiple debian repositories at the same time. (Useful, if one wants to use a few specific packages from backports or perhaps Debain testing... or even sid.)
-
-
-REQUIRED PARAMETERS
--------------------
-distribution
-   Specifies what distribution the package should be pinned to. Accepts both codenames (buster/bullseye/sid) and suite names (stable/testing/...).
-
-
-OPTIONAL PARAMETERS
--------------------
-package
-   Package name, glob or regular expression to match (multiple) packages. If not specified `__object_id` is used.
-
-priority
-   The priority value to assign to matching packages. Defaults to 500. (To match the default target distro's priority)
-
-state
-   Will be passed to underlying `__file` type; see there for valid values and defaults.
-
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-   # Add the bullseye repo to buster, but do not install any packages by default,
-   # only if explicitely asked for (-1 means "never" for apt)
-    __apt_pin bullseye-default \
-       --package "*" \
-       --distribution bullseye \
-       --priority -1
-
-    require="__apt_pin/bullseye-default" __apt_source bullseye \
-       --uri http://deb.debian.org/debian/ \
-       --distribution bullseye \
-       --component main
-
-    __apt_pin foo --package "foo foo-*" --distribution bullseye
-
-    __foo # Assuming, this installs the `foo` package internally
-
-    __package foo-plugin-extras # Assuming we also need some extra stuff
-
-
-SEE ALSO
---------
-:strong:`apt_preferences`\ (5)
-:strong:`cdist-type__apt_source`\ (7)
-:strong:`cdist-type__apt_backports`\ (7)
-:strong:`cdist-type__file`\ (7)
-
-AUTHORS
--------
-Daniel Fancsali <fancsali@gmail.com>
-
-
-COPYING
--------
-Copyright \(C) 2021 Daniel Fancsali. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__apt_pin/manifest

@@ -1,68 +0,0 @@
-#!/bin/sh -e
-#
-# 2021 Daniel Fancsali (fancsali@gmail.com)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-
-name="$__object_id"
-
-os=$(cat "$__global/explorer/os")
-state="$(cat "$__object/parameter/state")"
-
-if [ -f "$__object/parameter/package" ]; then
-    package="$(cat "$__object/parameter/package")"
-else
-    package=$name
-fi
-
-distribution="$(cat "$__object/parameter/distribution")"
-priority="$(cat "$__object/parameter/priority")"
-
-
-case "$os" in
-   debian|ubuntu|devuan)
-   ;;
-   *)
-      printf "This type is specific to Debian and it's derivatives" >&2
-      exit 1
-   ;;
-esac
-
-case $distribution in
-    stable|testing|unstable|experimental)
-        pin="release a=$distribution"
-        ;;
-    *)
-        pin="release n=$distribution"
-        ;;
-esac
-
-
-__file "/etc/apt/preferences.d/$name" \
-    --owner root --group root --mode 0644 \
-    --state "$state" \
-    --source - << EOF
-# Created by cdist ${__type##*/}
-# Do not change. Changes will be overwritten.
-#
-
-# $name
-Package: $package
-Pin: $pin
-Pin-Priority: $priority
-EOF

cdist/conf/type/__apt_pin/parameter/default/priority

@@ -1 +0,0 @@
-500

cdist/conf/type/__apt_pin/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__apt_pin/parameter/optional

@@ -1,3 +0,0 @@
-state
-package
-priority

cdist/conf/type/__apt_pin/parameter/required

@@ -1 +0,0 @@
-distribution

cdist/conf/type/__apt_ppa/files/remove-apt-repository

@@ -0,0 +1,55 @@
+#!/usr/bin/env python
+#
+# Remove the given apt repository.
+#
+# Exit with:
+#   0: if it worked
+#   1: if not
+#   2: on other error
+
+import os
+import sys
+from aptsources import distro, sourceslist
+from softwareproperties import ppa
+from softwareproperties.SoftwareProperties import SoftwareProperties
+
+
+def remove_if_empty(file_name):
+    with open(file_name, 'r') as f:
+        if f.read().strip():
+            return
+        os.unlink(file_name)
+
+def remove_repository(repository):
+    #print 'repository:', repository
+    codename = distro.get_distro().codename
+    #print 'codename:', codename
+    (line, file) = ppa.expand_ppa_line(repository.strip(), codename)
+    #print 'line:', line
+    #print 'file:', file
+    deb_source_entry = sourceslist.SourceEntry(line, file)
+    src_source_entry = sourceslist.SourceEntry('deb-src{}'.format(line[3:]), file)
+
+    try:
+        sp = SoftwareProperties()
+        sp.remove_source(deb_source_entry)
+        try:
+            # If there's a deb-src entry, remove that too
+            sp.remove_source(src_source_entry)
+        except:
+            pass
+        remove_if_empty(file)
+        return True
+    except ValueError:
+        print >> sys.stderr, "Error: '%s' doesn't exists in a sourcelist file" % line
+        return False
+
+if __name__ == '__main__':
+    if (len(sys.argv) != 2):
+        print >> sys.stderr, 'Error: need a repository as argument'
+        sys.exit(2)
+    repository = sys.argv[1]
+    if remove_repository(repository):
+        sys.exit(0)
+    else:
+        sys.exit(1)

cdist/conf/type/__apt_ppa/gencode-remote

@@ -29,9 +29,9 @@ fi
 
 case "$state_should" in
    present)
-      echo "add-apt-repository -y '$name'"
+      echo "add-apt-repository '$name'"
    ;;
    absent)
-      echo "add-apt-repository -r -y '$name'"
+      echo "remove-apt-repository '$name'"
    ;;
 esac

cdist/conf/type/__apt_ppa/manifest

@@ -20,4 +20,9 @@
 
 __package software-properties-common
 
+require="__package/software-properties-common" \
+   __file /usr/local/bin/remove-apt-repository \
+   --source "$__type/files/remove-apt-repository" \
+   --mode 0755
+
 require="$__object_name" __apt_update_index

cdist/conf/type/__apt_source/files/source.list.template

@@ -2,14 +2,13 @@
 set -u
 
 entry="$uri $distribution $component"
-
 cat << DONE
 # Created by cdist ${__type##*/}
 # Do not change. Changes will be overwritten.
 #
 
 # $name
-deb ${options} $entry
+deb ${forcedarch} $entry
 DONE
 if [ -f "$__object/parameter/include-src" ]; then
    echo "deb-src $entry"

cdist/conf/type/__apt_source/gencode-remote

@@ -22,21 +22,7 @@
 name="$__object_id"
 destination="/etc/apt/sources.list.d/${name}.list"
 
-# There are special arguments to apt(8) to prevent aborts if apt woudn't been
-# updated after the 19th April 2021 till the bullseye release. The additional
-# arguments acknoledge the happend suite change (the apt(8) update does the
-# same by itself).
-#
-# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-# allows backward compatablility to pre-buster Debian versions.
-#
-# See more: ticket #861
-# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
-# run 'apt-get update' only if something changed with our sources.list file
-#   it will be run a second time on error as a redundancy messure to success
 if grep -q "^__file${destination}" "$__messages_in"; then
-   printf 'apt-get %s update || apt-get %s update\n' "$apt_opts" "$apt_opts"
+   printf 'apt-get update || apt-get update\n'
 fi
 

cdist/conf/type/__apt_source/man.rst

@@ -23,9 +23,6 @@ OPTIONAL PARAMETERS
 arch
    set this if you need to force and specific arch (ubuntu specific)
 
-signed-by
-   provide a GPG key fingerprint or keyring path for signature checks
-
 state
    'present' or 'absent', defaults to 'present'
 
@@ -59,11 +56,6 @@ EXAMPLES
        --uri http://archive.canonical.com/ \
        --component partner --state present
 
-    __apt_source goaccess \
-       --uri http://deb.goaccess.io/ \
-       --component main \
-       --signed-by C03B48887D5E56B046715D3297BD1A0133449C3D
-
 
 AUTHORS
 -------

cdist/conf/type/__apt_source/manifest

@@ -21,7 +21,6 @@
 name="$__object_id"
 state="$(cat "$__object/parameter/state")"
 uri="$(cat "$__object/parameter/uri")"
-options=""
 
 if [ -f "$__object/parameter/distribution" ]; then
    distribution="$(cat "$__object/parameter/distribution")"
@@ -32,15 +31,9 @@ fi
 component="$(cat "$__object/parameter/component")"
 
 if [ -f "$__object/parameter/arch" ]; then
-   options="arch=$(cat "$__object/parameter/arch")"
-fi
-
-if [ -f "$__object/parameter/signed-by" ]; then
-   options="$options signed-by=$(cat "$__object/parameter/signed-by")"
-fi
-
-if [ "$options" ]; then
-    options="[$options]"
+   forcedarch="[arch=$(cat "$__object/parameter/arch")]"
+else
+   forcedarch=""
 fi
 
 # export variables for use in template
@@ -48,7 +41,7 @@ export name
 export uri
 export distribution
 export component
-export options
+export forcedarch
 
 # generate file from template
 mkdir "$__object/files"

cdist/conf/type/__apt_source/parameter/optional

@@ -2,4 +2,3 @@ state
 distribution
 component
 arch
-signed-by

cdist/conf/type/__apt_update_index/gencode-remote

@@ -18,23 +18,9 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-
-# There are special arguments to apt(8) to prevent aborts if apt woudn't been
-# updated after the 19th April 2021 till the bullseye release. The additional
-# arguments acknoledge the happend suite change (the apt(8) update does the
-# same by itself).
-#
-# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-# allows backward compatablility to pre-buster Debian versions.
-#
-# See more: ticket #861
-# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
 # run 'apt-get update' if anything in /etc/apt is newer then /var/lib/apt/lists
-#   it will be run a second time on error as a redundancy messure to success
 cat << DONE
 if find /etc/apt -mindepth 1 -cnewer /var/lib/apt/lists | grep . > /dev/null; then
-   apt-get $apt_opts update || apt-get $apt_opts update
+   apt-get update || apt-get update
 fi
 DONE

cdist/conf/type/__debconf_set_selections/explorer/state

@@ -1,142 +0,0 @@
-#!/bin/sh -e
-#
-# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Determine current debconf selections' state.
-# Prints one of:
-#   present: all selections are already set as they should.
-#   different: one or more of the selections have a different value.
-#   absent: one or more of the selections are not (currently) defined.
-#
-
-test -x /usr/bin/perl || {
-	# cannot find perl (no perl ~ no debconf)
-	echo 'absent'
-	exit 0
-}
-
-linesfile="${__object:?}/parameter/line"
-test -s "${linesfile}" || {
-	if test -s "${__object:?}/parameter/file"
-	then
-		echo absent
-	else
-		echo present
-	fi
-	exit 0
-}
-
-# assert __type_explorer is set (because it is used by the Perl script)
-: "${__type_explorer:?}"
-
-/usr/bin/perl -- - "${linesfile}" <<'EOF'
-use strict;
-use warnings "all";
-
-use Fcntl qw(:DEFAULT :flock);
-
-use Debconf::Db;
-use Debconf::Question;
-
-# Extract @known... arrays from debconf-set-selections
-# These values are required to distinguish flags and values in the given lines.
-# DC: I couldn't think of a more ugly solution to the problem…
-my @knownflags;
-my @knowntypes;
-my $debconf_set_selections = '/usr/bin/debconf-set-selections';
-if (-e $debconf_set_selections) {
-	my $sed_known = 's/^my \(@known\(flags\|types\) = qw([a-z ]*);\).*$/\1/p';
-	eval `sed -n '$sed_known' '$debconf_set_selections'`;
-}
-
-sub mungeline ($) {
-	my $line = shift;
-	chomp $line;
-	$line =~ s/\r$//;
-	return $line;
-}
-
-sub fatal { printf STDERR @_; exit 1; }
-
-my $state = 'present';
-
-sub state {
-	my $new = shift;
-	if ($state eq 'present'
-	    or ($state eq 'different' and $new eq 'absent')) {
-		$state = $new;
-	}
-}
-
-
-# Load Debconf DB but manually lock on the state explorer script,
-# because Debconf aborts immediately if executed concurrently.
-# This is not really an ideal solution because the Debconf DB could be locked by
-# another process (e.g. apt-get), but no way to achieve this could be found.
-# If you know how to, please provide a patch.
-my $lockfile = "%ENV{'__type_explorer'}/state";
-if (open my $lock_fh, '+<', $lockfile) {
-   flock $lock_fh, LOCK_EX or die "Cannot lock $lockfile";
-}
-{
-	Debconf::Db->load(readonly => 'true');
-}
-
-
-while (<>) {
-	# Read and process lines (taken from debconf-set-selections)
-	$_ = mungeline($_);
-	while (/\\$/ && ! eof) {
-		s/\\$//;
-		$_ .= mungeline(<>);
-	}
-	next if /^\s*$/ || /^\s*\#/;
-
-	my ($owner, $label, $type, $content) = /^\s*(\S+)\s+(\S+)\s+(\S+)(?:\s(.*))?/
-		or fatal "invalid line: %s\n", $_;
-	$content = '' unless defined $content;
-
-
-	# Compare is and should state
-	my $q = Debconf::Question->get($label);
-
-	unless (defined $q) {
-		# probably a preseed
-		state 'absent';
-		next;
-	}
-
-	if (grep { $_ eq $q->type } @knownflags) {
-		# This line wants to set a flag, presumably.
-		if ($q->flag($q->type) ne $content) {
-			state 'different';
-		}
-	} else {
-		# Otherwise, it's probably a value…
-		if ($q->value ne $content) {
-			state 'different';
-		}
-
-		unless (grep { $_ eq $owner } (split /, /, $q->owners)) {
-			state 'different';
-		}
-	}
-}
-
-printf "%s\n", $state;
-EOF

cdist/conf/type/__debconf_set_selections/gencode-remote

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 #
 # 2011-2014 Nico Schottelius (nico-cdist at schottelius.org)
-# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -18,37 +17,16 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
+#
+# Setup selections
+#
 
-if test -f "${__object:?}/parameter/line"
-then
-	filename="${__object:?}/parameter/line"
-elif test -s "${__object:?}/parameter/file"
-then
-	filename=$(cat "${__object:?}/parameter/file")
-	if test "${filename}" = '-'
-	then
-		filename="${__object:?}/stdin"
-	fi
-else
-	printf 'Neither --line nor --file set.\n' >&2
-	exit 1
+filename="$(cat "$__object/parameter/file")"
+
+if [ "$filename" = "-" ]; then
+    filename="$__object/stdin"
 fi
 
-# setting no lines makes no sense
-test -s "${filename}" || exit 0
-
-state_is=$(cat "${__object:?}/explorer/state")
-
-if test "${state_is}" != 'present'
-then
-	cat <<-CODE
-	debconf-set-selections <<'EOF'
-	$(cat "${filename}")
-	EOF
-	CODE
-
-	awk '
-		{
-			printf "set %s %s %s %s\n", $1, $2, $3, $4
-		}' "${filename}" >>"${__messages_out:?}"
-fi
+echo "debconf-set-selections << __file-eof"
+cat "$filename"
+echo "__file-eof"

cdist/conf/type/__debconf_set_selections/man.rst

@@ -8,33 +8,15 @@ cdist-type__debconf_set_selections - Setup debconf selections
 
 DESCRIPTION
 -----------
-On Debian and alike systems :strong:`debconf-set-selections`\ (1) can be used
+On Debian and alike systems debconf-set-selections(1) can be used
 to setup configuration parameters.
 
 
 REQUIRED PARAMETERS
 -------------------
-cf. ``--line``.
-
-
-OPTIONAL PARAMETERS
--------------------
 file
-   Use the given filename as input for :strong:`debconf-set-selections`\ (1)
-   If filename is ``-``, read from stdin.
-
-   **This parameter is deprecated, because it doesn't work with state detection.**
-line
-   A line in :strong:`debconf-set-selections`\ (1) compatible format.
-   This parameter can be used multiple times to set multiple options.
-
-   (This parameter is actually required, but marked optional because the
-   deprecated ``--file`` is still accepted.)
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
+   Use the given filename as input for debconf-set-selections(1)
+   If filename is "-", read from stdin.
 
 
 EXAMPLES
@@ -42,29 +24,30 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Setup gitolite's gituser
-    __debconf_set_selections nslcd --line 'gitolite gitolite/gituser string git'
+    # Setup configuration for nslcd
+    __debconf_set_selections nslcd --file /path/to/file
 
-    # Setup configuration for nslcd from a file.
-    # NB: Multiple lines can be passed to --line, although this can be considered a hack.
-    __debconf_set_selections nslcd --line "$(cat "${__files:?}/preseed/nslcd.debconf")"
+    # Setup configuration for nslcd from another type
+    __debconf_set_selections nslcd --file "$__type/files/preseed/nslcd"
+
+    __debconf_set_selections nslcd --file - << eof
+    gitolite gitolite/gituser string git
+    eof
 
 
 SEE ALSO
 --------
-- :strong:`cdist-type__update_alternatives`\ (7)
-- :strong:`debconf-set-selections`\ (1)
+:strong:`debconf-set-selections`\ (1), :strong:`cdist-type__update_alternatives`\ (7)
 
 
 AUTHORS
 -------
-| Nico Schottelius <nico-cdist--@--schottelius.org>
-| Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
+Nico Schottelius <nico-cdist--@--schottelius.org>
 
 
 COPYING
 -------
-Copyright \(C) 2011-2014 Nico Schottelius, 2021 Dennis Camera.
-You can redistribute it and/or modify it under the terms of the GNU General
-Public License as published by the Free Software Foundation, either version 3 of
-the License, or (at your option) any later version.
+Copyright \(C) 2011-2014 Nico Schottelius. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__debconf_set_selections/parameter/deprecated/file

@@ -1 +0,0 @@
-'file' has been deprecated in favour of 'line' in order to provide idempotency.

cdist/conf/type/__debconf_set_selections/parameter/optional_multiple

@@ -1 +0,0 @@
-line

cdist/conf/type/__dot_file/man.rst

@@ -37,12 +37,6 @@ state
 source
     forwarded to :strong:`__file` type
 
-file
-    forwarded to :strong:`__file` type
-    This can be used if multiple users need to have a dotfile updated,
-    which will result in duplicate object id errors. When using the
-    file parameter the object id can be some unique value.
-
 MESSAGES
 --------
 
@@ -67,15 +61,6 @@ EXAMPLES
     # Install default xmonad config for user 'eve'. Parent directory is created automatically.
     __dot_file .xmonad/xmonad.hs --user eve --state exists --source "$__files/xmonad.hs"
 
-    # install .vimrc for root and some users
-    for user in root userx usery userz; do
-        __dot_file "${user}_dot_vimrc" \
-            --user $user \
-            --file .vimrc \
-            --state exists \
-            --source "$__files/$user/.vimrc"
-    done
-
 SEE ALSO
 --------
 

cdist/conf/type/__dot_file/manifest

@@ -20,19 +20,13 @@ user="$(cat "${__object}/parameter/user")"
 home="$(cat "${__object}/explorer/home")"
 primary_group="$(cat "${__object}/explorer/primary_group")"
 dirmode="$(cat "${__object}/parameter/dirmode")"
-if [ -f "${__object}/parameter/file" ]; then
-    file="$(cat "${__object}/parameter/file")"
-else
-    file="${__object_id}"
-fi
-
 
 # Create parent directory. Type __directory has flag 'parents', but it
 # will leave us with root-owned directory in user home, which is not
 # acceptable. So we create parent directories one-by-one. XXX: maybe
 # it should be fixed in '__directory'?
 set --
-subpath=${file}
+subpath=${__object_id}
 while subpath="$(dirname "${subpath}")" ; do
 	[ "${subpath}" = . ] && break
 	set -- "${subpath}" "$@"
@@ -70,4 +64,4 @@ if [ "${source}" = "-" ] ; then
 fi
 unset source
 
-__file "${home}/${file}" --owner "$user" --group "$primary_group" "$@"
+__file "${home}/${__object_id}" --owner "$user" --group "$primary_group" "$@"

cdist/conf/type/__download/explorer/remote_cmd

@@ -0,0 +1,19 @@
+#!/bin/sh -e
+
+if [ -f "$__object/parameter/cmd-get" ]
+then
+    cmd="$( cat "$__object/parameter/cmd-get" )"
+
+elif command -v curl > /dev/null
+then
+    cmd="curl -L -o - '%s'"
+
+elif command -v fetch > /dev/null
+then
+    cmd="fetch -o - '%s'"
+
+else
+    cmd="wget -O - '%s'"
+fi
+
+echo "$cmd"

cdist/conf/type/__download/explorer/remote_cmd_get

@@ -1,16 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/cmd-get" ]
-then
-    cat "$__object/parameter/cmd-get"
-elif
-    command -v curl > /dev/null
-then
-    echo "curl -sSL -o - '%s'"
-elif
-    command -v fetch > /dev/null
-then
-    echo "fetch -o - '%s'"
-else
-    echo "wget -O - '%s'"
-fi

cdist/conf/type/__download/explorer/remote_cmd_sum

@@ -1,82 +0,0 @@
-#!/bin/sh -e
-
-if [ ! -f "$__object/parameter/sum" ]
-then
-    exit 0
-fi
-
-if [ -f "$__object/parameter/cmd-sum" ]
-then
-    cat "$__object/parameter/cmd-sum"
-    exit 0
-fi
-
-sum_should="$( cat "$__object/parameter/sum" )"
-
-if echo "$sum_should" | grep -Fq ':'
-then
-    sum_hash="$( echo "$sum_should" | cut -d : -f 1 )"
-else
-    if echo "$sum_should" | grep -Eq '^[0-9]+\s[0-9]+$'
-    then
-        sum_hash='cksum'
-    elif
-        echo "$sum_should" | grep -Eiq '^[a-f0-9]{32}$'
-    then
-        sum_hash='md5'
-    elif
-        echo "$sum_should" | grep -Eiq '^[a-f0-9]{40}$'
-    then
-        sum_hash='sha1'
-    elif
-        echo "$sum_should" | grep -Eiq '^[a-f0-9]{64}$'
-    then
-        sum_hash='sha256'
-    else
-        echo 'hash format detection failed' >&2
-        exit 1
-    fi
-fi
-
-os="$( "$__explorer/os" )"
-
-case "$sum_hash" in
-    cksum)
-        echo "cksum %s | awk '{print \$1\" \"\$2}'"
-    ;;
-    md5)
-        case "$os" in
-            freebsd)
-                echo "md5 -q %s"
-            ;;
-            *)
-                echo "md5sum %s | awk '{print \$1}'"
-            ;;
-        esac
-    ;;
-    sha1)
-        case "$os" in
-            freebsd)
-                echo "sha1 -q %s"
-            ;;
-            *)
-                echo "sha1sum %s | awk '{print \$1}'"
-            ;;
-        esac
-    ;;
-    sha256)
-        case "$os" in
-            freebsd)
-                echo "sha256 -q %s"
-            ;;
-            *)
-                echo "sha256sum %s | awk '{print \$1}'"
-            ;;
-        esac
-    ;;
-    *)
-        # we arrive here only if --sum is given with unknown format prefix
-        echo "unknown hash format: $sum_hash" >&2
-        exit 1
-    ;;
-esac

cdist/conf/type/__download/explorer/state

@@ -1,11 +1,6 @@
 #!/bin/sh -e
 
-if [ -f "$__object/parameter/destination" ]
-then
-    dst="$( cat "$__object/parameter/destination" )"
-else
 dst="/$__object_id"
-fi
 
 if [ ! -f "$dst" ]
 then
@@ -21,19 +16,57 @@ fi
 
 sum_should="$( cat "$__object/parameter/sum" )"
 
-if echo "$sum_should" | grep -Fq ':'
+if [ -f "$__object/parameter/cmd-sum" ]
 then
-    sum_should="$( echo "$sum_should" | cut -d : -f 2 )"
-fi
-
-sum_cmd="$( "$__type_explorer/remote_cmd_sum" )"
-
     # shellcheck disable=SC2059
-sum_is="$( eval "$( printf "$sum_cmd" "'$dst'" )" )"
+    sum_is="$( eval "$( printf \
+        "$( cat "$__object/parameter/cmd-sum" )" \
+        "$dst" )" )"
+else
+    os="$( "$__explorer/os" )"
+
+    if echo "$sum_should" | grep -Eq '^[0-9]+\s[0-9]+$'
+    then
+        sum_is="$( cksum "$dst" | awk '{print $1" "$2}' )"
+
+    elif echo "$sum_should" | grep -Eiq '^md5:[a-f0-9]{32}$'
+    then
+        case "$os" in
+            freebsd)
+                sum_is="md5:$( md5 -q "$dst" )"
+            ;;
+            *)
+                sum_is="md5:$( md5sum "$dst" | awk '{print $1}' )"
+            ;;
+        esac
+
+    elif echo "$sum_should" | grep -Eiq '^sha1:[a-f0-9]{40}$'
+    then
+        case "$os" in
+            freebsd)
+                sum_is="sha1:$( sha1 -q "$dst" )"
+            ;;
+            *)
+                sum_is="sha1:$( sha1sum "$dst" | awk '{print $1}' )"
+            ;;
+        esac
+
+    elif echo "$sum_should" | grep -Eiq '^sha256:[a-f0-9]{64}$'
+    then
+        case "$os" in
+            freebsd)
+                sum_is="sha256:$( sha256 -q "$dst" )"
+            ;;
+            *)
+                sum_is="sha256:$( sha256sum "$dst" | awk '{print $1}' )"
+            ;;
+        esac
+    fi
+fi
 
 if [ -z "$sum_is" ]
 then
-    echo 'existing destination checksum failed' >&2
+    echo 'no checksum from target' >&2
     exit 1
 fi
 

cdist/conf/type/__download/gencode-local

@@ -11,133 +11,34 @@ fi
 
 url="$( cat "$__object/parameter/url" )"
 
-if [ -f "$__object/parameter/destination" ]
-then
-    dst="$( cat "$__object/parameter/destination" )"
-else
+tmp="$( mktemp )"
+
 dst="/$__object_id"
-fi
 
 if [ -f "$__object/parameter/cmd-get" ]
 then
     cmd="$( cat "$__object/parameter/cmd-get" )"
 
+elif command -v wget > /dev/null
+then
+    cmd="wget -O - '%s'"
+
 elif command -v curl > /dev/null
 then
-    cmd="curl -sSL -o - '%s'"
+    cmd="curl -L -o - '%s'"
 
 elif command -v fetch > /dev/null
 then
     cmd="fetch -o - '%s'"
 
-elif command -v wget > /dev/null
-then
-    cmd="wget -O - '%s'"
-
 else
-    echo 'local download failed, no usable utility' >&2
+    echo 'no usable locally installed utility for downloading' >&2
     exit 1
 fi
 
-echo "download_tmp=\"\$( mktemp )\""
-
-# shellcheck disable=SC2059
-printf "$cmd > \"\$download_tmp\"\n" "$url"
-
-if [ -f "$__object/parameter/sum" ]
-then
-    sum_should="$( cat "$__object/parameter/sum" )"
-
-    if [ -f "$__object/parameter/cmd-sum" ]
-    then
-        local_cmd_sum="$( cat "$__object/parameter/cmd-sum" )"
-    else
-        if echo "$sum_should" | grep -Fq ':'
-        then
-            sum_hash="$( echo "$sum_should" | cut -d : -f 1 )"
-
-            sum_should="$( echo "$sum_should" | cut -d : -f 2 )"
-        else
-            if echo "$sum_should" | grep -Eq '^[0-9]+\s[0-9]+$'
-            then
-                sum_hash='cksum'
-            elif
-                echo "$sum_should" | grep -Eiq '^[a-f0-9]{32}$'
-            then
-                sum_hash='md5'
-            elif
-                echo "$sum_should" | grep -Eiq '^[a-f0-9]{40}$'
-            then
-                sum_hash='sha1'
-            elif
-                echo "$sum_should" | grep -Eiq '^[a-f0-9]{64}$'
-            then
-                sum_hash='sha256'
-            else
-                echo 'hash format detection failed' >&2
-                exit 1
-            fi
-        fi
-
-        case "$sum_hash" in
-            cksum)
-                local_cmd_sum="cksum %s | awk '{print \$1\" \"\$2}'"
-            ;;
-            md5)
-                if command -v md5 > /dev/null
-                then
-                    local_cmd_sum="md5 -q %s"
-                elif
-                    command -v md5sum > /dev/null
-                then
-                    local_cmd_sum="md5sum %s | awk '{print \$1}'"
-                fi
-            ;;
-            sha1)
-                if command -v sha1 > /dev/null
-                then
-                    local_cmd_sum="sha1 -q %s"
-                elif
-                    command -v sha1sum > /dev/null
-                then
-                    local_cmd_sum="sha1sum %s | awk '{print \$1}'"
-                fi
-            ;;
-            sha256)
-                if command -v sha256 > /dev/null
-                then
-                    local_cmd_sum="sha256 -q %s"
-                elif
-                    command -v sha256sum > /dev/null
-                then
-                    local_cmd_sum="sha256sum %s | awk '{print \$1}'"
-                fi
-            ;;
-            *)
-                # we arrive here only if --sum is given with unknown format prefix
-                echo "unknown hash format: $sum_hash" >&2
-                exit 1
-            ;;
-        esac
-
-        if [ -z "$local_cmd_sum" ]
-        then
-            echo 'local checksum verification failed, no usable utility' >&2
-            exit 1
-        fi
-    fi
-
-    # shellcheck disable=SC2059
-    echo "sum_is=\"\$( $( printf "$local_cmd_sum" "\"\$download_tmp\"" ) )\""
-
-    echo "if [ \"\$sum_is\" != '$sum_should' ]; then"
-
-    echo "echo 'local download checksum mismatch' >&2"
-
-    echo "rm -f \"\$download_tmp\""
-
-    echo 'exit 1; fi'
-fi
+printf "$cmd > %s\n" \
+    "$url" \
+    "$tmp"
 
 if echo "$__target_host" | grep -Eq '^[0-9a-fA-F:]+$'
 then
@@ -146,10 +47,12 @@ else
     target_host="$__target_host"
 fi
 
-# shellcheck disable=SC2016
-printf '%s "$download_tmp" %s:%s\n' \
+printf '%s %s %s:%s\n' \
     "$__remote_copy" \
+    "$tmp" \
     "$target_host" \
     "$dst"
 
-echo "rm -f \"\$download_tmp\""
+echo "rm -f '$tmp'"
+
+echo 'downloaded' > "$__messages_out"

cdist/conf/type/__download/gencode-remote

@@ -6,51 +6,17 @@ state_is="$( cat "$__object/explorer/state" )"
 
 if [ "$download" = 'remote' ] && [ "$state_is" != 'present' ]
 then
-    cmd_get="$( cat "$__object/explorer/remote_cmd_get" )"
+    cmd="$( cat "$__object/explorer/remote_cmd" )"
 
     url="$( cat "$__object/parameter/url" )"
 
-    if [ -f "$__object/parameter/destination" ]
-    then
-        dst="$( cat "$__object/parameter/destination" )"
-    else
     dst="/$__object_id"
-    fi
 
-    echo "download_tmp=\"\$( mktemp )\""
+    printf "$cmd > %s\n" \
+        "$url" \
+        "$dst"
 
-    # shellcheck disable=SC2059
-    printf "$cmd_get > \"\$download_tmp\"\n" "$url"
-
-    if [ -f "$__object/parameter/sum" ]
-    then
-        sum_should="$( cat "$__object/parameter/sum" )"
-
-        if [ -f "$__object/parameter/cmd-sum" ]
-        then
-            remote_cmd_sum="$( cat "$__object/parameter/cmd-sum" )"
-        else
-            remote_cmd_sum="$( cat "$__object/explorer/remote_cmd_sum" )"
-
-            if echo "$sum_should" | grep -Fq ':'
-            then
-                sum_should="$( echo "$sum_should" | cut -d : -f 2 )"
-            fi
-        fi
-
-        # shellcheck disable=SC2059
-        echo "sum_is=\"\$( $( printf "$remote_cmd_sum" "\"\$download_tmp\"" ) )\""
-
-        echo "if [ \"\$sum_is\" != '$sum_should' ]; then"
-
-        echo "echo 'remote download checksum mismatch' >&2"
-
-        echo "rm -f \"\$download_tmp\""
-
-        echo 'exit 1; fi'
-    fi
-
-    echo "mv \"\$download_tmp\" '$dst'"
+    echo 'downloaded' > "$__messages_out"
 fi
 
 if [ -f "$__object/parameter/onchange" ] && [ "$state_is" != "present" ]

cdist/conf/type/__download/man.rst

@@ -8,7 +8,7 @@ cdist-type__download - Download a file
 
 DESCRIPTION
 -----------
-By default type will try to use ``curl``, ``fetch`` or ``wget``.
+By default type will try to use ``wget``, ``curl`` or ``fetch``.
 If download happens in target (see ``--download``) then type will
 fallback to (and install) ``wget``.
 
@@ -16,8 +16,6 @@ If download happens in local machine, then environment variables like
 ``{http,https,ftp}_proxy`` etc can be used on cdist execution
 (``http_proxy=foo cdist config ...``).
 
-To change downloaded file's owner, group or permissions, use ``require='__download/path/to/file' __file ...``.
-
 
 REQUIRED PARAMETERS
 -------------------
@@ -27,29 +25,14 @@ url
 
 OPTIONAL PARAMETERS
 -------------------
-destination
-   Downloaded file's destination in target. If unset, ``$__object_id`` is used.
-
 sum
-   Supported formats: ``cksum`` output without file name, MD5, SHA1 and SHA256.
-
-   Type tries to detect hash format with regexes, but prefixes
-   ``cksum:``, ``md5:``, ``sha1:`` and ``sha256:`` are also supported.
-
-   Checksum have two purposes - state check and post-download verification.
-   In state check, if destination checksum mismatches, then content of URL
-   will be downloaded to temporary file. If downloaded temporary file's
-   checksum matches, then it will be moved to destination (overwritten).
-
-   For local downloads it is expected that usable utilities for checksum
-   calculation exist in the system.
+   Checksum is used to decide if existing destination file must be redownloaded.
+   By default output of ``cksum`` without filename is expected.
+   Other hash formats supported with prefixes: ``md5:``, ``sha1:`` and ``sha256:``.
 
 download
-   If ``local`` (default), then file is downloaded to local storage and copied
-   to target host. If ``remote``, then download happens in target.
-
-   For local downloads it is expected that usable utilities for downloading
-   exist in the system. Type will try to use ``curl``, ``fetch`` or ``wget``.
+   If ``local`` (default), then download file to local storage and copy
+   it to target host. If ``remote``, then download happens in target.
 
 cmd-get
    Command used for downloading.
@@ -79,7 +62,7 @@ EXAMPLES
     require='__directory/opt/cpma' \
         __download /opt/cpma/cnq3.zip \
             --url https://cdn.playmorepromode.com/files/cnq3/cnq3-1.51.zip \
-            --sum 46da3021ca9eace277115ec9106c5b46
+            --sum md5:46da3021ca9eace277115ec9106c5b46
 
     require='__download/opt/cpma/cnq3.zip' \
         __unpack /opt/cpma/cnq3.zip \

cdist/conf/type/__download/manifest

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-if grep -Eq '^wget' "$__object/explorer/remote_cmd_get"
+if grep -Eq '^wget' "$__object/explorer/remote_cmd"
 then
     __package wget
 fi

cdist/conf/type/__download/parameter/optional

@@ -1,6 +1,5 @@
+sum
 cmd-get
 cmd-sum
-destination
 download
 onchange
-sum

cdist/conf/type/__file/gencode-local

@@ -1,7 +1,7 @@
 #!/bin/sh -e
 #
 # 2011-2012 Nico Schottelius (nico-cdist at schottelius.org)
-# 2013-2022 Steven Armstrong (steven-cdist armstrong.cc)
+# 2013 Steven Armstrong (steven-cdist armstrong.cc)
 #
 # This file is part of cdist.
 #
@@ -72,7 +72,6 @@ if [ "$state_should" = "present" ] || [ "$state_should" = "exists" ]; then
          if [ "$type" != "file" ]; then
             # destination is not a regular file, upload source to replace it
             upload_file=1
-            echo upload >> "$__messages_out"
          else
             local_cksum="$(cksum < "$source")"
             remote_cksum="$(cat "$__object/explorer/cksum")"
@@ -89,30 +88,13 @@ if [ "$state_should" = "present" ] || [ "$state_should" = "exists" ]; then
       mkdir "$__object/files"
       touch "$__object/files/set-attributes"
 
-      if [ "$create_file" ]; then
-         # When creating an empty file we create it locally and then
-         # upload it so that permissions can be set before moving the file
-         # into place.
-         source="$__object/files/empty"
-         touch "$source"
-      fi
-
       # upload file to temp location
-      upload_destination="${destination}.cdist.${__cdist_object_marker}.$$"
-      # Yes, we are aware that this is a race condition.
-      # However:
-      # a) cdist usually writes to directories that are not user writable
-      #    (probably > 99.9%)
-      # b) if they are user owned, the user / attacker always wins
-      #    (probably < 0.1%)
-      # c) the only case which we could improve are tmp directories and we
-      #    don't think managing tmp directories with cdist is a typical case
-      #    ("the rest %)"
-
-      # Tell gencode-remote to where we uploaded the file so it can move
-      # it to its final destination.
-      echo "$upload_destination" > "$__object/files/upload-destination"
-
+      tempfile_template="${destination}.cdist.XXXXXXXXXX"
+      cat << DONE
+destination_upload="\$($__remote_exec $__target_host "mktemp $tempfile_template")"
+DONE
+      if [ "$upload_file" ]; then
+         echo upload >> "$__messages_out"
          # IPv6 fix
          if echo "${__target_host}" | grep -q -E '^[0-9a-fA-F:]+$'
          then
@@ -121,7 +103,12 @@ if [ "$state_should" = "present" ] || [ "$state_should" = "exists" ]; then
              my_target_host="${__target_host}"
          fi
          cat << DONE
-$__remote_copy "$source" "${my_target_host}:${upload_destination}"
+$__remote_copy "$source" "${my_target_host}:\$destination_upload"
+DONE
+      fi
+# move uploaded file into place
+cat << DONE
+$__remote_exec $__target_host "rm -rf \"$destination\"; mv \"\$destination_upload\" \"$destination\""
 DONE
    fi
 fi

cdist/conf/type/__file/gencode-remote

@@ -1,7 +1,7 @@
 #!/bin/sh -e
 #
 # 2011-2013 Nico Schottelius (nico-cdist at schottelius.org)
-# 2013-2022 Steven Armstrong (steven-cdist armstrong.cc)
+# 2013 Steven Armstrong (steven-cdist armstrong.cc)
 #
 # This file is part of cdist.
 #
@@ -62,13 +62,6 @@ set_mode() {
 
 case "$state_should" in
     present|exists)
-        if [ -f "$__object/files/upload-destination" ]; then
-            final_destination="$destination"
-            # We change the 'global' $destination variable here so we can
-            # change attributes of the new/uploaded file before moving it
-            # to it's final destination.
-            destination="$(cat "$__object/files/upload-destination")"
-        fi
         # Note: Mode - needs to happen last as a chown/chgrp can alter mode by
         #  clearing S_ISUID and S_ISGID bits (see chown(2))
         for attribute in group owner mode; do
@@ -88,11 +81,6 @@ case "$state_should" in
                 fi
             fi
         done
-        if [ -f "$__object/files/upload-destination" ]; then
-            # move uploaded file into place
-            printf 'rm -rf "%s"\n' "$final_destination"
-            printf 'mv "%s" "%s"\n' "$destination" "$final_destination"
-        fi
         if [ -f "$__object/files/set-attributes" ]; then
             # set-attributes is created if file is created or uploaded in gencode-local
             fire_onchange=1

cdist/conf/type/__filesystem/explorer/lsblk

@@ -27,7 +27,7 @@ else
 fi
 
 case "$os" in
-    alpine|centos|fedora|gentoo|redhat|suse|ubuntu)
+    alpine|centos|fedora|redhat|suse|gentoo)
         if [ ! -x "$(command -v lsblk)" ]; then
             echo "lsblk is required for __filesystem type" >&2
             exit 1

cdist/conf/type/__grafana_dashboard/manifest

@@ -15,7 +15,7 @@ case $os in
                 # Differntation not needed anymore
                 apt_source_distribution=stable
                 ;;
-            10*|11*)
+            10*)
                 # Differntation not needed anymore
                 apt_source_distribution=stable
                 ;;

cdist/conf/type/__haproxy_dualstack/files/http

@@ -1,8 +0,0 @@
-frontend http
-	bind	BIND@:80
-	mode	http
-	option	httplog
-	default_backend	http
-
-backend http
-	mode	http

cdist/conf/type/__haproxy_dualstack/files/https

@@ -1,10 +0,0 @@
-frontend https
-	bind	BIND@:443
-	mode	tcp
-	option	tcplog
-	tcp-request	inspect-delay 5s
-	tcp-request	content accept if { req_ssl_hello_type 1 }
-	default_backend	https
-
-backend https
-	mode	tcp

cdist/conf/type/__haproxy_dualstack/files/imaps

@@ -1,12 +0,0 @@
-frontend imaps
-	bind	BIND@:143
-	bind	BIND@:993
-
-	mode	tcp
-	option	tcplog
-	tcp-request	inspect-delay 5s
-	tcp-request	content accept if { req_ssl_hello_type 1 }
-	default_backend	imaps
-
-backend imaps
-	mode	tcp

cdist/conf/type/__haproxy_dualstack/files/smtps

@@ -1,12 +0,0 @@
-frontend smtps
-	bind	BIND@:25
-	bind	BIND@:465
-
-	mode	tcp
-	option	tcplog
-	tcp-request	inspect-delay 5s
-	tcp-request	content accept if { req_ssl_hello_type 1 }
-	default_backend	smtps
-
-backend smtps
-	mode	tcp

cdist/conf/type/__haproxy_dualstack/man.rst

@@ -1,121 +0,0 @@
-cdist-type__haproxy_dualstack(7)
-================================
-
-
-NAME
-----
-cdist-type__haproxy_dualstack - Proxy services from a dual-stack server
-
-
-DESCRIPTION
------------
-This (singleton) type installs and configures haproxy to act as a dual-stack
-proxy for single-stack services.
-
-This can be useful to add IPv4 support to IPv6-only services while only using
-one IPv4 for many such services.
-
-By default this type uses the plain TCP proxy mode, which means that there is no
-need for TLS termination on this host when SNI is supported.
-This also means that proxied services will not receive the client's IP address,
-but will see the proxy's IP address instead (that of `$__target_host`).
-
-This can be solved by using the PROXY protocol, but do take into account that,
-e.g. nginx cannot serve both regular HTTP(S) and PROXY protocols on the same
-port, so you will need to use other ports for that.
-
-As a recommendation in this type: use TCP ports 8080 and 591 respectively to
-serve HTTP and HTTPS using the PROXY protocol.
-
-See the EXAMPLES for more details.
-
-
-OPTIONAL PARAMETERS
--------------------
-v4proxy
-    Proxy incoming IPv4 connections to the equivalent IPv6 endpoint.
-    In its simplest use, it must be a NAME with an `AAAA` DNS entry, which is
-    the IP address actually providing the proxied services.
-    The full format of this argument is:
-    `[proxy:]NAME[[:PROTOCOL_1=PORT_1]...[:PROTOCOL_N=PORT_N]]`
-    Where starting with `proxy:` determines that the PROXY protocol must be
-    used and each `:PROTOCOL=PORT` (e.g. `:http=8080` or `:https=591`) is a PORT
-    override for the given PROTOCOL (see `--protocol`), if not present the
-    PROTOCOL's default port will be used.
-
-
-v6proxy
-    Proxy incoming IPv6 connections to the equivalent IPv4 endpoint.
-    In its simplest use, it must be a NAME with an `A` DNS entry, which is
-    the IP address actually providing the proxied services.
-    See `--v4proxy` for more options and details.
-
-protocol
-    Can be passed multiple times or as a space-separated list of protocols.
-    Currently supported protocols are: `http`, `https`, `imaps`, `smtps`.
-    This defaults to: `http https imaps smtps`.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Proxy the IPv6-only services so IPv4-only clients can access them
-    # This uses HAProxy's TCP mode for http, https, imaps and smtps
-    __haproxy_dualstack \
-        --v4proxy ipv6.chat \
-        --v4proxy matrix.ungleich.ch
-
-    # Proxy the IPv6-only HTTP(S) services so IPv4-only clients can access them
-    # Note this means that the backend IPv6-only server will only see
-    # the IPv6 address of the haproxy host managed by cdist, which can be
-    # troublesome if this information is relevant for analytics/security/...
-    # See the PROXY example below
-    __haproxy_dualstack \
-        --protocol http --protocol https \
-        --v4proxy ipv6.chat \
-        --v4proxy matrix.ungleich.ch
-
-    # Use the PROXY protocol to proxy the IPv6-only HTTP(S) services enabling
-    # IPv4-only clients to access them while maintaining the client's IP address
-    __haproxy_dualstack \
-        --protocol http --protocol https \
-        --v4proxy proxy:ipv6.chat:http=8080:https=591 \
-        --v4proxy proxy:matrix.ungleich.ch:http=8080:https=591
-    # Note however that the PROXY protocol is not compatible with regular
-    # HTTP(S) protocols, so your nginx will have to listen on different ports
-    # with the PROXY settings.
-    # Note that you will need to restrict access to the 8080 port to prevent
-    # Client IP spoofing.
-    # This can be something like:
-    # server {
-    #     # listen for regular HTTP connections
-    #     listen [::]:80 default_server;
-    #     listen 80 default_server;
-    #     # listen for PROXY HTTP connections
-    #     listen [::]:8080 proxy_protocol;
-    #     # Accept the Client's IP from the PROXY protocol
-    #     real_ip_header proxy_protocol;
-    # }
-
-
-SEE ALSO
---------
-- https://www.haproxy.com/blog/enhanced-ssl-load-balancing-with-server-name-indication-sni-tls-extension/
-- https://www.haproxy.com/blog/haproxy/proxy-protocol/
-- https://docs.nginx.com/nginx/admin-guide/load-balancer/using-proxy-protocol/
-
-
-AUTHORS
--------
-ungleich <foss--@--ungleich.ch>
-Evilham <cvs--@--evilham.com>
-
-
-COPYING
--------
-Copyright \(C) 2021 ungleich glarus ag. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__haproxy_dualstack/manifest

@@ -1,155 +0,0 @@
-#!/bin/sh -eu
-
-__package haproxy
-require="__package/haproxy" __start_on_boot haproxy
-
-tmpdir="$__object/files"
-mkdir "$tmpdir"
-configtmp="$__object/files/haproxy.cfg"
-
-os=$(cat "$__global/explorer/os")
-case $os in
-	freebsd)
-		CONFIG_FILE="/usr/local/etc/haproxy.conf"
-		cat <<EOF > "$configtmp"
-global
-	maxconn	4000
-	user	nobody
-	group	nogroup
-	daemon
-
-EOF
-
-		;;
-	*)
-		CONFIG_FILE="/etc/haproxy/haproxy.cfg"
-		cat <<EOF > "$configtmp"
-global
-	log	[::1] local2
-	chroot	/var/lib/haproxy
-	pidfile	/var/run/haproxy.pid
-	maxconn	4000
-	user	haproxy
-	group	haproxy
-	daemon
-
-	# turn on stats unix socket
-	stats socket	/var/lib/haproxy/stats
-
-EOF
-		;;
-esac
-
-cat <<EOF >> "$configtmp"
-defaults
-	retries	3
-	log	global
-	timeout http-request	10s
-	timeout queue		1m
-	timeout connect		10s
-	timeout client		1m
-	timeout server		1m
-	timeout http-keep-alive	10s
-	timeout check		10s
-EOF
-
-dig_cmd="$(command -v dig || true)"
-get_ip() {
-	# Usage: get_ip (ipv4|ipv6) NAME
-	# uses "dig" if available, else fallback to "host"
-	case $1 in
-		ipv4)
-			if [ -n "${dig_cmd}" ]; then
-				${dig_cmd} +short A "$2"
-			else
-				host -t A "$2" | cut -d ' ' -f 4 | grep -v 'found:'
-			fi
-			;;
-		ipv6)
-			if [ -n "${dig_cmd}" ]; then
-				${dig_cmd} +short AAAA "$2"
-			else
-				host -t AAAA "$2" | cut -d ' ' -f 5 | grep -v 'NXDOMAIN'
-			fi
-			;;
-	esac
-}
-
-PROTOCOLS="$(cat "$__object/parameter/protocol")"
-
-for proxy in v4proxy v6proxy; do
-	param=$__object/parameter/$proxy
-	# no backend? skip generating code
-	if [ ! -f "$param" ]; then
-		continue
-	fi
-
-	# turn backend name into bind parameter: v4backend -> ipv4@
-	bind=$(echo $proxy | sed -e 's/^/ip/' -e 's/proxy//')
-
-	case $bind in
-		ipv4)
-			backendproto=ipv6
-			;;
-		ipv6)
-			backendproto=ipv4
-			;;
-	esac
-
-	for proto in ${PROTOCOLS}; do
-		# Add protocol "header"
-		printf "\n# %s %s \n" "${bind}" "${proto}" >> "$configtmp"
-
-		sed -e "s/BIND/$bind/" \
-			-e "s/\(frontend[[:space:]].*\)/\1$bind/" \
-			-e "s/\(backend[[:space:]].*\)/\\1$bind/" \
-			"$__type/files/$proto" >> "$configtmp"
-
-		while read -r hostdefinition; do
-			if echo "$hostdefinition" | grep -qE '^proxy:'; then
-				# Proxy protocol was requested
-				host="$(echo "$hostdefinition" | sed -E 's/^proxy:([^:]+).*$/\1/')"
-				send_proxy=" send-proxy"
-			else
-				# Just use tcp proxy mode
-				host="$hostdefinition"
-				send_proxy=""
-			fi
-			if echo "$hostdefinition" | grep -qE ":${proto}="; then
-				# Use custom port definition if requested
-				port="$(echo "$hostdefinition" | sed -E "s/^(.*:)?${proto}=([0-9]+).*$/:\2/")"
-			else
-				# Else use the default
-				port=""
-			fi
-			servername=$host
-
-			res=$(get_ip "$bind" "$servername")
-
-			if [ -z "$res" ]; then
-				echo "$servername does not resolve - aborting config" >&2
-				exit 1
-			fi
-
-			# Treat protocols without TLS+SNI specially
-			if [ "$proto" = http ]; then
-				echo "	use-server $servername if { hdr(host) -i $host }" >> "$configtmp"
-			else
-				echo "	use-server $servername if { req_ssl_sni -i $host }" >> "$configtmp"
-			fi
-
-			# Create the "server" itself.
-			# Note that port and send_proxy will be empty unless
-			# they were requested by the type user
-			echo "	server $servername ${backendproto}@${host}${port}${send_proxy}" >> "$configtmp"
-
-		done < "$param"
-	done
-done
-
-# Create config file
-require="__package/haproxy" __file ${CONFIG_FILE} --source "$configtmp" --mode 0644
-
-require="__file${CONFIG_FILE}" __check_messages "haproxy_reload" \
-	--pattern "^__file${CONFIG_FILE}" \
-	--execute "service haproxy reload || service haproxy restart"

cdist/conf/type/__haproxy_dualstack/parameter/default/protocol

@@ -1 +0,0 @@
-http https imaps smtps

cdist/conf/type/__haproxy_dualstack/parameter/optional_multiple

@@ -1,3 +0,0 @@
-protocol
-v4proxy
-v6proxy

cdist/conf/type/__letsencrypt_cert/manifest

@@ -41,7 +41,7 @@ if [ -z "${certbot_fullpath}" ]; then
 					require="__apt_source/stretch-backports" __package_apt certbot \
 						--target-release stretch-backports
 				;;
-				10*|11*)
+				10*)
 					__package_apt certbot
 				;;
 
@@ -85,7 +85,7 @@ if [ -z "${certbot_fullpath}" ]; then
 			esac
 		;;
 		freebsd)
-			__package py39-certbot
+			__package py37-certbot
 			certbot_fullpath="/usr/local/bin/certbot"
 		;;
 		ubuntu)

cdist/conf/type/__package_apt/gencode-remote

@@ -81,24 +81,12 @@ aptget="DEBIAN_FRONTEND=noninteractive apt-get --quiet --yes -o Dpkg::Options::=
 
 case "$state_should" in
     present)
-        # There are special arguments to apt(8) to prevent aborts if apt woudn't been
-        # updated after the 19th April 2021 till the bullseye release. The additional
-        # arguments acknoledge the happend suite change (the apt(8) update does the
-        # same by itself).
-        #
-        # Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-        # allows backward compatablility to pre-buster Debian versions.
-        #
-        # See more: ticket #861
-        # https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-        apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
         # following is bit ugly, but important hack.
         # due to how cdist config run works, there isn't
         # currently better way to do it :(
         cat << EOF
 if [ ! -f /var/cache/apt/pkgcache.bin ] || [ "\$( stat --format %Y /var/cache/apt/pkgcache.bin )" -lt "\$( date +%s -d '-1 day' )" ]
-then echo apt-get $apt_opts update > /dev/null 2>&1 || true
+then echo apt-get update > /dev/null 2>&1 || true
 fi
 EOF
         if [ -n "$version" ]; then

cdist/conf/type/__package_luarocks/manifest

@@ -19,5 +19,5 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-__package luarocks --state present
-__package make --state present
+__package luarocks --state installed
+__package make --state installed

cdist/conf/type/__package_pkg_freebsd/gencode-remote

@@ -37,7 +37,6 @@ assert ()                 #  If condition false,
 	then
 		echo "Assertion failed:  \"$1\""
 		# shellcheck disable=SC2039
-		# shellcheck disable=SC3044
 		echo "File \"$0\", line $lineno, called by $(caller 0)"
 		exit $E_ASSERT_FAILED
 	fi

cdist/conf/type/__package_update_index/gencode-remote

@@ -41,19 +41,7 @@ fi
 case "$type" in
     yum) ;;
     apt)
-        # There are special arguments to apt(8) to prevent aborts if apt woudn't been
-        # updated after the 19th April 2021 till the bullseye release. The additional
-        # arguments acknoledge the happend suite change (the apt(8) update does the
-        # same by itself).
-        #
-        # Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-        # allows backward compatablility to pre-buster Debian versions.
-        #
-        # See more: ticket #861
-        # https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-        apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
-        echo "apt-get --quiet $apt_opts update"
+        echo "apt-get --quiet update"
         echo "apt-cache updated (age was: $currage)" >> "$__messages_out"
         ;;
     pacman)

cdist/conf/type/__package_upgrade_all/gencode-remote

@@ -28,10 +28,6 @@ apt_clean="$__object/parameter/apt-clean"
 
 apt_dist_upgrade="$__object/parameter/apt-dist-upgrade"
 
-if [ -f "$__object/parameter/apt-with-new-pkgs" ]; then
-	apt_with_new_pkgs="--with-new-pkgs"
-fi
-
 if [ -f "$type" ]; then
     type="$(cat "$type")"
 else
@@ -58,7 +54,7 @@ case "$type" in
     apt)
         if [ -f "$apt_dist_upgrade" ]
         then echo "$aptget dist-upgrade"
-        else echo "$aptget $apt_with_new_pkgs upgrade"
+        else echo "$aptget upgrade"
         fi
 
         if [ -f "$apt_clean" ]

cdist/conf/type/__package_upgrade_all/man.rst

@@ -33,14 +33,6 @@ BOOLEAN PARAMETERS
 apt-dist-upgrade
     Do dist-upgrade instead of upgrade.
 
-apt-with-new-pkg
-    Allow installing new packages when used in conjunction with
-    upgrade. This is useful if the update of an installed package
-    requires new dependencies to be installed. Instead of holding the
-    package back upgrade will upgrade the package and install the new
-    dependencies. Note that upgrade with this option will never remove
-    packages, only allow adding new ones.
-
 apt-clean
     Clean out the local repository of retrieved package files.
 

cdist/conf/type/__package_upgrade_all/parameter/boolean

@@ -1,3 +1,2 @@
 apt-clean
 apt-dist-upgrade
-apt-with-new-pkgs

cdist/conf/type/__rsync/gencode-local

@@ -1,104 +1,39 @@
 #!/bin/sh -e
-
-if ! command -v rsync > /dev/null
-then
-    echo 'rsync is missing in local machine' >&2
-    exit 1
-fi
-
-src="$( cat "$__object/parameter/source" )"
-
-if [ ! -e "$src" ]
-then
-    echo "$src not found" >&2
-    exit 1
-fi
-
-if [ -f "$__object/parameter/destination" ]
-then
-    dst="$( cat "$__object/parameter/destination" )"
-else
-    dst="/$__object_id"
-fi
-
-# if source is directory, then make sure that
-# source and destination are ending with slash,
-# because this is what you almost always want when
-# rsyncing two directories.
-
-if [ -d "$src" ]
-then
-    if ! echo "$src" | grep -Eq '/$'
-    then
-        src="$src/"
-    fi
-
-    if ! echo "$dst" | grep -Eq '/$'
-    then
-        dst="$dst/"
-    fi
-fi
-
-remote_user="$( cat "$__object/parameter/remote-user" )"
-
-options="$( cat "$__object/parameter/options" )"
-
-if [ -f "$__object/parameter/option" ]
-then
-    while read -r l
-    do
-        # there's a limitation in argparse: value can't begin with '-'.
-        # to workaround this, let's prefix opts with '\' in manifest and remove here.
-        # read more about argparse issue: https://bugs.python.org/issue9334
-
-        options="$options $( echo "$l" | sed 's/\\//g' )"
-    done \
-        < "$__object/parameter/option"
-fi
-
-if [ -f "$__object/parameter/owner" ] || [ -f "$__object/parameter/group" ]
-then
-    options="$options --chown="
-
-    if [ -f "$__object/parameter/owner" ]
-    then
-        owner="$( cat "$__object/parameter/owner" )"
-        options="$options$owner"
-    fi
-
-    if [ -f "$__object/parameter/group" ]
-    then
-        group="$( cat "$__object/parameter/group" )"
-        options="$options:$group"
-    fi
-fi
-
-if [ -f "$__object/parameter/mode" ]
-then
-    mode="$( cat "$__object/parameter/mode" )"
-    options="$options --chmod=$mode"
-fi
-
-# IMPORTANT
 #
-# 1. we first dry-run rsync with change summary to find out
-#    if there are any changes and code generation is needed.
-# 2. normally, to get current state or target host, we run
-#    such operations in type explorers, but that's not
-#    possible due to how rsync works.
-# 3. redirecting output of dry-run to stderr to ease debugging.
-# 4. to understand how that cryptic regex works, please
-#    open rsync manpage and read about --itemize-changes.
+# 2015 Dominique Roux (dominique.roux4 at gmail.com)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
 
-export RSYNC_RSH="$__remote_exec"
+source=$(cat "$__object/parameter/source")
+remote_user=$(cat "$__object/parameter/remote-user")
 
-# shellcheck disable=SC2086
-if ! rsync --dry-run --itemize-changes $options "$src" "$remote_user@$__target_host:$dst" \
-    | grep -E '^(<|>|c|h|\.|\*)[fdL][cstTpogunbax\.\+\?]+\s' >&2
-then
-    exit 0
+if [ -f "$__object/parameter/destination" ]; then
+    destination=$(cat "$__object/parameter/destination")
+else
+    destination="/$__object_id"
 fi
 
-echo "export RSYNC_RSH='$__remote_exec'"
+set --
+if [ -f "$__object/parameter/rsync-opts" ]; then
+    while read -r opts; do
+        set -- "$@" "--$opts"
+    done < "$__object/parameter/rsync-opts"
+fi
 
-echo "rsync $options $src $remote_user@$__target_host:$dst"
+echo rsync -a \
+    --no-owner --no-group \
+    -q "$@" "${source}/" "${remote_user}@${__target_host}:${destination}"

cdist/conf/type/__rsync/gencode-remote

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 #
-# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
+# 2015 Dominique Roux (dominique.roux4 at gmail.com)
 #
 # This file is part of cdist.
 #
@@ -18,4 +18,20 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-__package_apt debconf
+if [ -f "$__object/parameter/destination" ]; then
+    destination=$(cat "$__object/parameter/destination")
+else
+    destination="/$__object_id"
+fi
+
+ownergroup=""
+if [ -f "$__object/parameter/owner" ]; then
+    ownergroup=$(cat "$__object/parameter/owner")
+fi
+if [ -f "$__object/parameter/group" ]; then
+    ownergroup="${ownergroup}:$(cat "$__object/parameter/group")"
+fi
+
+if [ "$ownergroup" ]; then
+    echo chown -R "$ownergroup" "$destination"
+fi

cdist/conf/type/__rsync/man.rst

@@ -3,73 +3,112 @@ cdist-type__rsync(7)
 
 NAME
 ----
-cdist-type__rsync - Mirror directories using ``rsync``
+cdist-type__rsync - Mirror directories using rsync
 
 
 DESCRIPTION
 -----------
-The purpose of this type is to bring power of ``rsync`` into ``cdist``.
+WARNING: This type is of BETA quality:
+
+- it has not been tested widely
+- interfaces *may* change
+- if there is a better approach to solve the problem -> the type may even vanish
+
+If you are fine with these constraints, please read on.
+
+
+This cdist type allows you to mirror local directories to the
+target host using rsync. Rsync will be installed in the manifest of the type.
+If group or owner are giveng, a recursive chown will be executed on the 
+target host.
+
+A slash will be appended to the source directory so that only the contents
+of the directory are taken and not the directory name itself.
 
 
 REQUIRED PARAMETERS
 -------------------
 source
-   Source directory in local machine.
-   If source is directory, slash (``/``) will be added to source and destination paths.
+    Where to take files from
 
 
 OPTIONAL PARAMETERS
 -------------------
-destination
-   Destination directory. Defaults to ``$__object_id``.
+group
+   Group to chgrp to.
 
 owner
-   Will be passed to ``rsync`` as ``--chown=OWNER``.
-   Read ``rsync(1)`` for more details.
+   User to chown to.
 
-group
-   Will be passed to ``rsync`` as ``--chown=:GROUP``.
-   Read ``rsync(1)`` for more details.
-
-mode
-   Will be passed to ``rsync`` as ``--chmod=MODE``.
-   Read ``rsync(1)`` for more details.
-
-options
-   Defaults to ``--recursive --links --perms --times``.
-   Due to `bug in Python's argparse<https://bugs.python.org/issue9334>`_, value must be prefixed with ``\``.
+destination
+    Use this as the base destination instead of the object id
 
 remote-user
-   Defaults to ``root``.
+    Use this user instead of the default "root" for rsync operations.
 
 
 OPTIONAL MULTIPLE PARAMETERS
 ----------------------------
-option
-   Pass additional options to ``rsync``.
-   See ``rsync(1)`` for all possible options.
-   Due to `bug in Python's argparse<https://bugs.python.org/issue9334>`_, value must be prefixed with ``\``.
+rsync-opts
+    Use this option to give rsync options with.
+    See rsync(1) for available options.
+    Only "--" options are supported.
+    Write the options without the beginning "--"
+    Can be specified multiple times.
+
+
+MESSAGES
+--------
+NONE
 
 
 EXAMPLES
 --------
+
 .. code-block:: sh
 
-    __rsync /var/www/example.com \
-        --owner root \
-        --group www-data \
-        --mode 'D750,F640' \
-        --source "$__files/example.com/www"
+    # You can use any source directory
+    __rsync /tmp/testdir \
+        --source /etc
+
+    # Use source from type
+    __rsync /etc \
+        --source "$__type/files/package"
+
+    # Allow multiple __rsync objects to write to the same dir
+    __rsync mystuff \
+        --destination /usr/local/bin \
+        --source "$__type/files/package"
+
+    __rsync otherstuff \
+        --destination /usr/local/bin \
+        --source "$__type/files/package2"
+
+    # Use rsync option --exclude
+    __rsync /tmp/testdir \
+        --source /etc \
+        --rsync-opts exclude=sshd_conf
+
+    # Use rsync with multiple options --exclude --dry-run
+    __rsync /tmp/testing \
+        --source /home/tester \
+        --rsync-opts exclude=id_rsa \
+        --rsync-opts dry-run
+
+
+SEE ALSO
+--------
+:strong:`rsync`\ (1)
 
 
 AUTHORS
 -------
-Ander Punnar <ander-at-kvlt-dot-ee>
+Nico Schottelius <nico-cdist--@--schottelius.org>
 
 
 COPYING
 -------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.
+Copyright \(C) 2015 Nico Schottelius. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__rsync/manifest

@@ -1,3 +1,21 @@
 #!/bin/sh -e
+#
+# 2015 Dominique Roux (dominique.roux4 at gmail.com)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
 
 __package rsync

cdist/conf/type/__rsync/parameter/default/options

@@ -1 +0,0 @@
---recursive --links --perms --times

cdist/conf/type/__rsync/parameter/optional

@@ -1,6 +1,4 @@
 destination
-group
-mode
-options
 owner
+group
 remote-user

cdist/conf/type/__rsync/parameter/optional_multiple

@@ -1 +1 @@
-option
+rsync-opts

cdist/conf/type/__sed/explorer/file

@@ -1,16 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/file" ]
-then
-    file="$( cat "$__object/parameter/file" )"
-else
-    file="/$__object_id"
-fi
-
-if [ ! -e "$file" ]
-then
-    echo "$file does not exist" >&2
-    exit 1
-fi
-
-cat "$file"

cdist/conf/type/__sed/gencode-remote

@@ -1,58 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/file" ]
-then
-    file="$( cat "$__object/parameter/file" )"
-else
-    file="/$__object_id"
-fi
-
-script="$( cat "$__object/parameter/script" )"
-
-if [ "$script" = '-' ]
-then
-    script="$( cat "$__object/stdin" )"
-fi
-
-# since stdin is not available in explorer, we pull file from target with explorer
-
-file_from_target="$__object/explorer/file"
-
-sed_cmd='sed'
-
-if [ -f "$__object/parameter/regexp-extended" ]
-then
-    sed_cmd="$sed_cmd -E"
-fi
-
-# do sed dry run, diff result and if no change, then there's nothing to do
-# also redirect diff's output to stderr for debugging purposes
-
-if echo "$script" | "$sed_cmd" -f - "$file_from_target" | diff -u "$file_from_target" - >&2
-then
-    exit 0
-fi
-
-# we can't use -i, because it's not posix, so we fly with tempfile and cp
-# and we use cp because we want to preserve destination file's attributes
-
-# shellcheck disable=SC2016
-echo 'tmp="$__object/tempfile"'
-
-echo "$sed_cmd -f - '$file' > \"\$tmp\" << EOF"
-
-echo "$script"
-
-echo 'EOF'
-
-echo "cp \"\$tmp\" '$file'"
-
-# shellcheck disable=SC2016
-echo 'rm -f "$tmp"'
-
-echo 'change' >> "$__messages_out"
-
-if [ -f "$__object/parameter/onchange" ]
-then
-    cat "$__object/parameter/onchange"
-fi

cdist/conf/type/__sed/man.rst

@@ -1,57 +0,0 @@
-cdist-type__sed(7)
-==================
-
-NAME
-----
-cdist-type__sed - Transform text files with ``sed``
-
-
-DESCRIPTION
------------
-Transform text files with ``sed``.
-
-
-REQUIRED MULTIPLE PARAMETERS
-----------------------------
-script
-   ``sed`` script.
-   If ``-`` then the script is read from ``stdin``.
-
-
-OPTIONAL PARAMETERS
--------------------
-file
-   Path to the file. Defaults to ``$__object_id``.
-
-onchange
-   Execute this command if ``sed`` changes file.
-
-
-BOOLEAN PARAMETERS
-------------------
-regexp-extended
-   Use extended regular expressions in the script.
-   Might not be supported with every ``sed`` version.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-   __sed /tmp/foobar --script 's/foo/bar/'
-
-   echo 's/foo/bar/' | __sed foobar --file /tmp/foobar --script -
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.

cdist/conf/type/__sed/parameter/boolean

@@ -1 +0,0 @@
-regexp-extended

cdist/conf/type/__sed/parameter/optional

@@ -1,2 +0,0 @@
-file
-onchange

cdist/conf/type/__sed/parameter/required_multiple

@@ -1 +0,0 @@
-script

cdist/conf/type/__snakeoil_cert/explorer/ssl-cert-group

@@ -1,8 +0,0 @@
-#!/bin/sh -e
-
-if grep -Eq '^ssl-cert:' /etc/group
-then
-    echo 'present'
-else
-    echo 'absent'
-fi

cdist/conf/type/__snakeoil_cert/explorer/state

@@ -1,24 +0,0 @@
-#!/bin/sh -e
-
-key_path="$( cat "$__object/parameter/key-path" )"
-
-if echo "$key_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    key_path="$( printf "$key_path" "$__object_id" )"
-fi
-
-cert_path="$( cat "$__object/parameter/cert-path" )"
-
-if echo "$cert_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    cert_path="$( printf "$cert_path" "$__object_id" )"
-fi
-
-if [ ! -f "$key_path" ] || [ ! -f "$cert_path" ]
-then
-    echo 'absent'
-else
-    echo 'present'
-fi

cdist/conf/type/__snakeoil_cert/gencode-remote

@@ -1,73 +0,0 @@
-#!/bin/sh -e
-
-state="$( cat "$__object/explorer/state" )"
-
-if [ "$state" = 'present' ]
-then
-    exit 0
-fi
-
-if [ -f "$__object/parameter/common-name" ]
-then
-    common_name="$( cat "$__object/parameter/common-name" )"
-else
-    common_name="$__object_id"
-fi
-
-key_path="$( cat "$__object/parameter/key-path" )"
-
-if echo "$key_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    key_path="$( printf "$key_path" "$__object_id" )"
-fi
-
-cert_path="$( cat "$__object/parameter/cert-path" )"
-
-if echo "$cert_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    cert_path="$( printf "$cert_path" "$__object_id" )"
-fi
-
-key_type="$( cat "$__object/parameter/key-type" )"
-
-key_type_arg="$( echo "$key_type" | cut -d : -f 2 )"
-
-case "$key_type" in
-    rsa:*)
-        echo "openssl genrsa -out '$key_path' $key_type_arg"
-    ;;
-    ec:*)
-        echo "openssl ecparam -name $key_type_arg -genkey -noout -out '$key_path'"
-    ;;
-esac
-
-# shellcheck disable=SC2016
-echo 'csr_path="$( mktemp )"'
-
-echo "openssl req -new -subj '/CN=$common_name' -key '$key_path' -out \"\$csr_path\""
-
-echo "openssl x509 -req -sha256 -days 3650 -in \"\$csr_path\" -signkey '$key_path' -out '$cert_path'"
-
-# shellcheck disable=SC2016
-echo 'rm -f "$csr_path"'
-
-if [ "$( cat "$__object/explorer/ssl-cert-group" )" = 'present' ]
-then
-    key_group='ssl-cert'
-else
-    key_group='root'
-fi
-
-echo "chmod 640 '$key_path'"
-
-echo "chown root '$key_path'"
-
-echo "chgrp $key_group '$key_path'"
-
-echo "chmod 644 '$cert_path'"
-
-echo "chown root '$cert_path'"
-
-echo "chgrp root '$cert_path'"

cdist/conf/type/__snakeoil_cert/man.rst

@@ -1,61 +0,0 @@
-cdist-type__snakeoil_cert(7)
-============================
-
-NAME
-----
-cdist-type__snakeoil_cert - Generate self-signed certificate
-
-
-DESCRIPTION
------------
-The purpose of this type is to generate **self-signed** certificate and private key
-for **testing purposes**. Certificate will expire in 3650 days.
-
-Certificate's and key's access bits will be ``644`` and ``640`` respectively.
-If target system has ``ssl-cert`` group, then it will be used as key's group.
-Use ``require='__snakeoil_cert/...' __file ...`` to override.
-
-
-OPTIONAL PARAMETERS
--------------------
-common-name
-   Defaults to ``$__object_id``.
-
-key-path
-   ``%s`` in path will be replaced with ``$__object_id``.
-   Defaults to ``/etc/ssl/private/%s.pem``.
-
-key-type
-   Possible values are ``rsa:$bits`` and ``ec:$name``.
-   For possible EC names see ``openssl ecparam -list_curves``.
-   Defaults to ``rsa:2048``.
-
-cert-path
-   ``%s`` in path will be replaced with ``$__object_id``.
-   Defaults to ``/etc/ssl/certs/%s.pem``.
-
-
-EXAMPLES
---------
-.. code-block:: sh
-
-	__snakeoil_cert localhost-rsa \
-	    --common-name localhost \
-	    --key-type rsa:4096
-
-	__snakeoil_cert localhost-ec \
-	    --common-name localhost \
-	    --key-type ec:prime256v1
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.

cdist/conf/type/__snakeoil_cert/parameter/default/cert-path

@@ -1 +0,0 @@
-/etc/ssl/certs/%s.pem

cdist/conf/type/__snakeoil_cert/parameter/default/key-path

@@ -1 +0,0 @@
-/etc/ssl/private/%s.pem

cdist/conf/type/__snakeoil_cert/parameter/default/key-type

@@ -1 +0,0 @@
-rsa:2048

cdist/conf/type/__snakeoil_cert/parameter/optional

@@ -1,4 +0,0 @@
-common-name
-key-path
-key-type
-cert-path

cdist/conf/type/__ssh_authorized_key/gencode-remote

@@ -40,7 +40,6 @@ if [ -f "$file" ]; then
    grep -v -F -x '$line' '$file' >\$tmpfile
 fi
 cat "\$tmpfile" >"$file"
-rm -f "\$tmpfile"
 DONE
 }
 

cdist/conf/type/__ssh_authorized_keys/explorer/keys

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 
 # shellcheck disable=SC1090
-# shellcheck disable=SC1091
 file="$( . "$__type_explorer/file" )"
 
 if [ -f "$file" ]

cdist/conf/type/__timezone/gencode-remote

@@ -34,12 +34,3 @@ case "$os" in
       echo "echo \"$timezone_should\" > /etc/timezone"
    ;;
 esac
-
-case "$os" in
-    openwrt)
-        cat <<EOF
-			uci set system.@system[0].timezone="$timezone_should"
-			uci commit
-EOF
-   ;;
-esac

cdist/conf/type/__timezone/manifest

@@ -54,9 +54,6 @@ case "$os" in
                 --delimiter '=' \
                 --value "\"$timezone\""
     ;;
-    openwrt)
-        : # Uses gencode-remote
-        ;;
     *)
         echo "Your operating system ($os) is currently not supported by this type (${__type##*/})." >&2
         echo "Please contribute an implementation for it if you can." >&2

cdist/conf/type/__update_alternatives/explorer/alternatives

@@ -1,4 +1,4 @@
 #!/bin/sh -e
 
-LC_ALL=C update-alternatives --display "${__object_id:?}" 2>/dev/null \
+update-alternatives --display "$__object_id" 2>/dev/null \
     | awk -F ' - ' '/priority [0-9]+$/ { print $1 }'

cdist/conf/type/__update_alternatives/explorer/link

@@ -18,12 +18,12 @@ for altdir in \
     /var/lib/dpkg/alternatives \
     /var/lib/alternatives
 do
-    if [ ! -f "$altdir/${__object_id:?}" ]
+    if [ ! -f "$altdir/$__object_id" ]
     then
         continue
     fi
 
-    link="$( awk 'NR==2' "$altdir/${__object_id:?}" )"
+    link="$( awk 'NR==2' "$altdir/$__object_id" )"
 
     if [ -n "$link" ]
     then
@@ -31,12 +31,9 @@ do
     fi
 done
 
-if [ -z "$link" ] && [ -z "${__cdist_dry_run+dry run}" ]
+if [ -z "$link" ]
 then
-    # NOTE: ignore error for dry-runs because a package providing the link
-    #       might be managed by another cdist object (which wasn't executed,
-    #       because dry run…).
-    echo "unable to get link for ${__object_id:?}" >&2
+    echo "unable to get link for $__object_id" >&2
     exit 1
 fi
 

cdist/conf/type/__update_alternatives/explorer/path_is

@@ -1,15 +1,11 @@
 #!/bin/sh -e
 
-path_is=$(
-    LC_ALL=C update-alternatives --display "${__object_id?}" 2>/dev/null \
-    | awk '/link currently points to/ { print $5 }')
+path_is="$( update-alternatives --display "$__object_id" 2>/dev/null \
+    | awk '/link currently points to/ {print $5}' )"
 
-if [ -z "$path_is" ] && [ -z "${__cdist_dry_run+dry run}" ]
+if [ -z "$path_is" ]
 then
-    # NOTE: ignore error for dry-runs because a package providing the
-    #       alternative might be managed by another cdist object (which
-    #       wasn't executed, because dry run…).
-    echo "unable to get current path for ${__object_id:?}" >&2
+    echo "unable to get current path for $__object_id" >&2
     exit 1
 fi
 

cdist/conf/type/__update_alternatives/explorer/path_should_state

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-if [ -f "$( cat "${__object:?}/parameter/path" )" ]
+if [ -f "$( cat "$__object/parameter/path" )" ]
 then
     echo 'present'
 else

cdist/conf/type/__update_alternatives/gencode-remote

@@ -18,39 +18,37 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 
-path_is="$( cat "${__object:?}/explorer/path_is" )"
+path_is="$( cat "$__object/explorer/path_is" )"
 
-path_should="$( cat "${__object:?}/parameter/path" )"
+path_should="$( cat "$__object/parameter/path" )"
 
 if [ "$path_is" = "$path_should" ]
 then
     exit 0
 fi
 
-if [ "$( cat "${__object:?}/explorer/path_should_state" )" = 'absent' ] \
-    && [ -z "${__cdist_dry_run+dry run}" ]
+if [ "$( cat "$__object/explorer/path_should_state" )" = 'absent' ] && [ -z "$__cdist_dry_run" ]
 then
     echo "$path_should does not exist in target" >&2
     exit 1
 fi
 
-name=${__object_id:?}
+name="$__object_id"
 
-if ! grep -Fxq "$path_should" "${__object:?}/explorer/alternatives"
+alternatives="$( cat "$__object/explorer/alternatives" )"
+
+if ! echo "$alternatives" | grep -Fxq "$path_should"
 then
-    if [ -f "${__object:?}/parameter/install" ]
+    if [ ! -f "$__object/parameter/install" ]
     then
-        link="$( cat "${__object:?}/explorer/link" )"
-        echo "update-alternatives --install '$link' '$name' '$path_should' 1000"
-    elif [ -z "${__cdist_dry_run+dry run}" ]
-    then
-        # NOTE: ignore error for dry-runs because a package providing the link
-        #       to be installed might be managed by another cdist object (which
-        #       wasn't executed, because dry run…).
         echo "$path_should is not in $name alternatives." >&2
         echo 'Please install missing packages or use --install to add path to alternatives.' >&2
         exit 1
     fi
+
+    link="$( cat "$__object/explorer/link" )"
+
+    echo "update-alternatives --install '$link' '$name' '$path_should' 1000"
 fi
 
 echo "update-alternatives --set '$name' '$path_should'"

cdist/conf/type/__user_groups/explorer/group

@@ -20,4 +20,4 @@
 
 user="$(cat "$__object/parameter/user" 2>/dev/null || echo "$__object_id")"
 
-(id -G -n "$user" | tr ' ' '\n') 2>/dev/null || true
+(id -G -n "$user" | tr ' ' '\n' | sort) 2>/dev/null || true