diff --git a/thingsnetwork/Sodaq_RN2483.cpp b/thingsnetwork/Sodaq_RN2483.cpp
new file mode 120000
index 0000000..5102a89
--- /dev/null
+++ b/thingsnetwork/Sodaq_RN2483.cpp
@@ -0,0 +1 @@
+../Sodaq_RN2483.cpp
\ No newline at end of file
diff --git a/thingsnetwork/Sodaq_RN2483.h b/thingsnetwork/Sodaq_RN2483.h
new file mode 120000
index 0000000..515c9e8
--- /dev/null
+++ b/thingsnetwork/Sodaq_RN2483.h
@@ -0,0 +1 @@
+../Sodaq_RN2483.h
\ No newline at end of file
diff --git a/thingsnetwork/StringLiterals.h b/thingsnetwork/StringLiterals.h
new file mode 120000
index 0000000..83e008e
--- /dev/null
+++ b/thingsnetwork/StringLiterals.h
@@ -0,0 +1 @@
+../StringLiterals.h
\ No newline at end of file
diff --git a/thingsnetwork/Switchable_Device.cpp b/thingsnetwork/Switchable_Device.cpp
new file mode 120000
index 0000000..5fb5dda
--- /dev/null
+++ b/thingsnetwork/Switchable_Device.cpp
@@ -0,0 +1 @@
+../Switchable_Device.cpp
\ No newline at end of file
diff --git a/thingsnetwork/Switchable_Device.h b/thingsnetwork/Switchable_Device.h
new file mode 120000
index 0000000..0c82682
--- /dev/null
+++ b/thingsnetwork/Switchable_Device.h
@@ -0,0 +1 @@
+../Switchable_Device.h
\ No newline at end of file
diff --git a/thingsnetwork/Utils.h b/thingsnetwork/Utils.h
new file mode 120000
index 0000000..70d35c6
--- /dev/null
+++ b/thingsnetwork/Utils.h
@@ -0,0 +1 @@
+../Utils.h
\ No newline at end of file
diff --git a/thingsnetwork/thethingsnetwork.ino b/thingsnetwork/thethingsnetwork.ino
new file mode 100644
index 0000000..a2b6f62
--- /dev/null
+++ b/thingsnetwork/thethingsnetwork.ino
@@ -0,0 +1,358 @@
+#include "Sodaq_RN2483.h"
+#include "Arduino.h"
+
+
+#define debugSerial SerialUSB
+#define loraSerial Serial1
+
+/* The number of the device: 1,2,3,4 */
+#define deviceNo 2
+
+#define beePin ENABLE_PIN_IO
+
+#define LOUDNESS_SENSOR 0
+#define LIGHT_SENSOR 2
+#define WATER_SENSOR 6
+#define BUZZER 8
+#define MAGNETIC_SWITCH 12
+#define TEMPERATURE     13
+
+int loudness;
+
+void BLUE() {
+    digitalWrite(LED_RED, HIGH);
+    digitalWrite(LED_GREEN, HIGH);
+    digitalWrite(LED_BLUE, LOW);
+}
+
+void RED() {
+    digitalWrite(LED_RED, LOW);
+    digitalWrite(LED_GREEN, HIGH);
+    digitalWrite(LED_BLUE, HIGH);
+}
+
+void YELLOW() {
+    digitalWrite(LED_RED, LOW);
+    digitalWrite(LED_GREEN, LOW);
+    digitalWrite(LED_BLUE, HIGH);
+}
+
+void WHITE() {
+    digitalWrite(LED_RED, LOW);
+    digitalWrite(LED_GREEN, LOW);
+    digitalWrite(LED_BLUE, LOW);
+}
+
+
+void GREEN() {
+    digitalWrite(LED_RED, HIGH);
+    digitalWrite(LED_GREEN, LOW);
+    digitalWrite(LED_BLUE, HIGH);
+}
+
+void CLEAR() {
+    digitalWrite(LED_RED, HIGH);
+    digitalWrite(LED_GREEN, HIGH);
+    digitalWrite(LED_BLUE, HIGH);
+}
+
+void blink(int length) {
+    switch(deviceNo) {
+    case 1:
+        BLUE();
+        break;
+    case 2:
+        RED();
+        break;
+    case 3:
+        GREEN();
+        break;
+    case 4:
+        WHITE();
+        break;
+    }
+    delay(length);
+    CLEAR();
+}
+
+void beep(int howlong) {
+     buzzOn();
+     delay(howlong);
+     buzzOff();
+}
+
+void buzzOn() {
+    digitalWrite(BUZZER, HIGH);
+}
+
+void buzzOff() {
+    digitalWrite(BUZZER, LOW);
+}
+
+
+void setupLED() {
+  pinMode(LED_RED, OUTPUT);
+  pinMode(LED_GREEN, OUTPUT);
+  pinMode(LED_BLUE, OUTPUT);
+}
+
+
+
+uint8_t DevEUI[8] = { 0x9c, 0xd9, 0x0b, 0xb5, 0x2b, 0x6a, 0x1d, deviceNo };
+
+// TTN
+uint8_t AppEUI[8] = { 0x70, 0xB3, 0xD5, 0x7E, 0xD0, 0x00, 0x0E, 0x9e };
+
+
+// F1B165CF06B156B0BB6970FC209602EA
+uint8_t AppKey[16] = { 0xF1, 0xB1, 0x65, 0xCF,
+                       0x06, 0xB1, 0x56, 0xB0, 0xBB,
+                       0x69, 0x70, 0xFC, 0x20, 0x96,
+                       0x02, 0xEA };
+
+uint8_t counter;
+
+void setupLoRaOTAA(){
+  if (LoRaBee.initOTA(loraSerial, DevEUI, AppEUI, AppKey, true))
+  {
+    debugSerial.println("Communication to LoRaBEE successful.");
+  }
+  else
+  {
+    debugSerial.println("OTAA Setup failed!");
+  }
+}
+
+
+int setupLoudness()
+{
+    loudness = 0;
+	// pinMode(LOUDNESS_SENSOR, INPUT);
+}
+
+int readLoudness()
+{
+	return analogRead(LOUDNESS_SENSOR);
+}
+
+int readLight()
+{
+    int sensorValue = analogRead(LIGHT_SENSOR);
+    return map(sensorValue, 11, 27333, 0, 413);
+}
+
+void setupWater() {
+     pinMode(WATER_SENSOR, INPUT);
+}
+
+boolean hasWater()
+{
+    if(digitalRead(WATER_SENSOR) == LOW) {
+        return true;
+    } else {
+        return false;
+    }
+}
+
+void setupTemp() {
+     pinMode(TEMPERATURE, INPUT);
+}
+
+float readTemp()
+{
+    float temperature;
+    int B=4250;            //B value of the thermistor
+    float resistance;
+    int a;
+
+    a=analogRead(TEMPERATURE);
+    resistance=(float)(1023-a)*10000/a; //get the resistance of the sensor;
+    temperature=1/(log(resistance/10000)/B+1/298.15)-273.15;//convert to temperature via datasheet ;
+
+	return temperature;
+}
+
+
+void setupBuzzer()
+{
+    pinMode(BUZZER, OUTPUT);
+}
+
+
+void setupMagnet()
+{
+    pinMode(MAGNETIC_SWITCH, INPUT);
+}
+
+boolean isMagnetic()
+{
+  if(digitalRead(MAGNETIC_SWITCH) == HIGH)
+      return true;
+  else
+      return false;
+}
+
+
+
+void setup() {
+  //Power up the LoRaBEE - on loraone/sodaq one
+  pinMode(ENABLE_PIN_IO, OUTPUT); // ONE
+
+  digitalWrite(beePin, HIGH); // ONE
+  delay(3000);
+
+  /* Enable the pins 2/3, 6/7 and 8/9 */
+  pinMode(11, OUTPUT);
+  digitalWrite(11, HIGH);
+
+  while ((!SerialUSB) && (millis() < 10000)){
+    // Wait 10 seconds for the Serial Monitor
+  }
+
+  //Set baud rate
+  debugSerial.begin(57600);
+  loraSerial.begin(LoRaBee.getDefaultBaudRate());
+
+  // Debug output from LoRaBee
+  // LoRaBee.setDiag(debugSerial); // optional
+
+  setupLED();
+  blink(60);
+
+  /* used for blinking */
+  counter=0;
+  setupLoudness();
+
+  //connect to the LoRa Network
+  setupLoRa();
+
+/*  setupWater();
+  setupBuzzer();
+  setupMagnet(); */
+
+}
+
+void setupLoRa(){
+  setupLoRaOTAA();
+}
+
+void sendPacket(String packet){
+  switch (LoRaBee.sendReqAck(1, (uint8_t*)packet.c_str(), packet.length(), 8))
+    {
+    case NoError:
+      debugSerial.println("Successful transmission.");
+      break;
+    case NoResponse:
+      debugSerial.println("There was no response from the device.");
+      setupLoRa();
+      break;
+    case Timeout:
+      debugSerial.println("Connection timed-out. Check your serial connection to the device! Sleeping for 20sec.");
+      delay(20000);
+      break;
+    case PayloadSizeError:
+      debugSerial.println("The size of the payload is greater than allowed. Transmission failed!");
+      break;
+    case InternalError:
+      debugSerial.println("Oh No! This shouldn't happen. Something is really wrong! Try restarting the device!\r\nThe network connection will reset.");
+      setupLoRa();
+      break;
+    case Busy:
+      debugSerial.println("The device is busy. Sleeping for 10 extra seconds.");
+      delay(10000);
+      break;
+    case NetworkFatalError:
+      debugSerial.println("There is a non-recoverable error with the network connection. You should re-connect.\r\nThe network connection will reset.");
+      setupLoRa();
+      break;
+    case NotConnected:
+      debugSerial.println("The device is not connected to the network. Please connect to the network before attempting to send data.\r\nThe network connection will reset.");
+      setupLoRa();
+      break;
+    case NoAcknowledgment:
+      debugSerial.println("There was no acknowledgment sent back!");
+      // When you this message you are probaly out of range of the network.
+      break;
+    default:
+      break;
+    }
+}
+
+void loop() {
+
+
+  /* Announce begin of code */
+  blink(20); delay(50);
+  blink(20); delay(50);
+  blink(20); delay(50);
+
+  loudness = readLoudness();
+
+  String data_loudness = String("loudness=" + String(loudness, DEC));
+  debugSerial.println(data_loudness);
+
+/*  String data_light = String("light=" + String(readLight(), 3));
+    debugSerial.println(data_light); */
+
+/*  String data_temp = String("temp=" + String(readTemp(), 3));
+    debugSerial.println(data_temp);*/
+
+
+  /*
+  String data_water;
+  if(hasWater()) {
+      data_water = String("water=1");
+      buzzOn();
+  } else {
+      data_water = String("water=0");
+      buzzOff();
+  }
+  debugSerial.println(data_water);
+
+  String data_magnet;
+  if(isMagnetic()) {
+      data_magnet = String("magnet=1");
+  } else {
+      data_magnet = String("magnet=0");
+  }
+  debugSerial.println(data_magnet);
+
+  */
+
+//  sendPacket(data_loudness);
+  blink(20); delay(2980);
+
+
+  /*sendPacket(data_temp);
+  blink(20); delay(2980);
+  sendPacket(data_light);
+  blink(20); delay(2980);
+  sendPacket(data_water);
+  blink(20); delay(2980);
+  sendPacket(data_magnet);*/
+
+
+  /* Blink long after sending packet
+  if(counter >= 10) {
+      // Beep(20);
+      blink(20);
+      delay(10);
+      blink(20);
+      sendPacket(data_temp);
+      blink(500);
+      sendPacket(data_loudness);
+      blink(500);
+      sendPacket(data_light);
+      blink(500);
+      sendPacket(data_water);
+      blink(500);
+      sendPacket(data_magnet);
+      counter = 0;
+  } else {
+      blink(30);
+      counter++;
+  }
+  */
+
+  // delay(1000);
+}