Merge branch 'master' of code.ungleich.ch:ungleich-public/ungleich-tools

openwrt/viirb-1-firmware-upgrade.sh

@@ -3,8 +3,8 @@
 # See https://ungleich.ch/u/products/viirb-ipv6-box/
 
 if [ $# -ne 1 ]; then
-    echo "$0 interface [address]"
-    echo "    address: connect to this address, ignore the interface"
+    echo "$0 address"
+    echo "    address: connect to this address"
     exit 1
 fi
 
@@ -13,7 +13,7 @@ set -x
 viirb_ip=$1; shift
 
 # openwrt
-version=19.07.6
+version=19.07.7
 filename=openwrt-${version}-ramips-mt76x8-vocore2-squashfs-sysupgrade.bin
 
 # don't care about other/old known_host entries

openwrt/viirb-2-configure.sh

@@ -120,36 +120,24 @@ uci set dhcp.wifi.dynamicdhcp='0'
 # Ensure it is not disabled
 uci delete wireless.radio0.disabled
 
-# This is temporary - keeping it until the config process is through
-# Probably not needet - we can connect to the final IPv6 address!
-# This code commented out == The address vanishes due to above reconfiguration
-# uci set network.lanv4temp=interface
-# uci set network.lanv4temp.proto='static'
-# uci set network.lanv4temp.ifname='br-lan'
-# uci set network.lanv4temp.ipaddr='192.168.61.1'
-# uci set network.lanv4temp.netmask='255.255.255.0'
-
 uci commit
 
-# Need to reboot to restore /etc/resolv.conf
-reboot
+# This should not be needed, as we connect directly to the dynamic IPv4
+# /etc/init.d/network restart
 
-#/etc/init.d/network restart
-EOF
+# # ensure viirb is back
+# # ensure viirb network is up and running - bridge takes a bit of time
+# # ensure viirb gives out ipv6 address
+# # Found: 30s is not enough for full reconfiguration
+# echo "Public VPN key: ${id} ${public_key}"
+# sleep 60
 
-# ensure viirb is back
-# ensure viirb network is up and running - bridge takes a bit of time
-# ensure viirb gives out ipv6 address
-# Found: 30s is not enough for full reconfiguration
-echo "Public VPN key: ${id} ${public_key}"
-sleep 60
+# # change to ipv6
+# viirb_ip=${my_lan_ip}
 
-# change to ipv6
-viirb_ip=${my_lan_ip}
+# ping -c5 ${viirb_ip}
 
-ping -c5 ${viirb_ip}
-
-cat <<EOF | ssh -t "root@${viirb_ip}"
+# cat <<EOF | ssh -t "root@${viirb_ip}"
 ping -c5 ungleich.ch || exit 1
 
 # update the sources
@@ -222,4 +210,3 @@ reboot
 EOF
 
 echo "Wireguard public key and id: ${id} ${public_key}"
-echo ${public_key} > ${viirb_hostname}.public_key

openwrt/viirb-4-cleanup.sh

@@ -36,6 +36,9 @@ rm -f /etc/dropbear/authorized_keys
 
 # Setup root password
 printf "${root_password}\n${root_password}\n" | passwd
+
+# Ensure everything's good
+reboot
 EOF
 
 echo "Submit to user the root password = ${root_password}"