update viwib configs

openwrt/viirb-2-configure.sh

@@ -17,7 +17,7 @@ id=$1; shift
 hex_id=$(printf "%0.2x\n" "$id")
 viirb_hostname=viirb${id}
 
-prefix_base=2a0a:e5c1:3
+prefix_base=2a0a:e5c1:6
 my_prefix=${prefix_base}${hex_id}
 my_network=${my_prefix}::/48
 

openwrt/viwib-2-configure.sh

@@ -17,7 +17,7 @@ id=$1; shift
 hex_id=$(printf "%0.2x\n" "$id")
 viwib_hostname=viwib${id}
 
-prefix_base=2a0a:e5c1:3
+prefix_base=2a0a:e5c1:6
 my_prefix=${prefix_base}${hex_id}
 my_network=${my_prefix}::/48
 
@@ -33,8 +33,8 @@ else
 fi
 public_key=$(echo $private_key | wg pubkey)
 
-vpn_endpoint_host=vpn-2a0ae5c1300.ungleich.ch
+vpn_endpoint_host=vpn-2a0ae5c1600.ungleich.ch
-vpn_endpoint_pubkey=ft68G2RID7gZ6PXjFCSCOdJ9yspRg+tUw0YrNK9cTxE=
+vpn_endpoint_pubkey=ygZQW3OSiMJl/RpKyaJVE0GSt6bjEDnoxdMJsNiloRE=
 
 ping -c3 ${viwib_ip}
 if [ $? -ne 0 ]; then
@@ -46,36 +46,27 @@ cat <<EOF | ssh -t "root@${viwib_ip}"
 set -x
 # Setup lan to also retrieve an ip address via dhcp
 
-# This stays in the final setup
+# Adjust LAN to be IPv6 only
-uci set network.lan.proto='dhcp'
 uci delete network.lan.ipaddr
 uci delete network.lan.netmask
-
+uci set network.lan.ip6addr='${my_lan_ip}/64'
-# The IPv6 lan configuration
-uci set network.lanv6=interface
-uci set network.lanv6.proto='static'
-uci set network.lanv6.ip6addr='${my_lan_ip}/64'
-uci set network.lanv6.ifname='br-lan'
-
-# LAN / Router advertisements / DHCP
-# DHCP: we are not authoratative
-uci delete dhcp.@dnsmasq[0].authoritative
-uci delete dhcp.lan.dhcpv6
-uci delete dhcp.lan.start
-uci delete dhcp.lan.limit
-uci delete dhcp.lan.leasetime
 
 # Do not announce ULA - we have GUA
 uci delete network.globals.ula_prefix
 
-# This is configuring the dhcp IPv4 client
+# Setup Router Advertisements / remove IPv4 dhcp
-uci set dhcp.lan=dhcp
-
-# Setup Router Advertisements
-uci set dhcp.lan.interface='lanv6'
 uci set dhcp.lan.ra='server'
 uci set dhcp.lan.dynamicdhcp='0'
 
+uci delete dhcp.@dnsmasq[0].authoritative
+
+uci delete dhcp.lan.start
+uci delete dhcp.lan.limit
+uci delete dhcp.lan.leasetime
+
+# We do stateless by default everywhere
+uci delete dhcp.lan.dhcpv6
+
 # Fix DNS: make dnsmasq NOT use a resolv.conf
 # so that it only reads from our servers with DNS64 enabled
 uci set dhcp.@dnsmasq[0].noresolv='1'
@@ -90,51 +81,34 @@ uci add_list dhcp.@dnsmasq[0].server='2a0a:e5c0:0:a::a'
 uci add_list dhcp.@dnsmasq[0].server='2a0a:e5c0:2:a::a'
 
 # wifi ip address
-uci set network.wifi=interface
+# uci set network.wifi=interface
-uci set network.wifi.proto='static'
+# uci set network.wifi.proto='static'
-uci set network.wifi.ip6addr='${my_wifi_ip}/64'
+# uci set network.wifi.ip6addr='${my_wifi_ip}/64'
 
 # Wifi configuration
 uci set wireless.radio0=wifi-device
-uci set wireless.radio0.type='mac80211'
-uci set wireless.radio0.hwmode='11g'
-uci set wireless.radio0.path='platform/10300000.wmac'
 uci set wireless.radio0.htmode='HT40'
 uci set wireless.radio0.country='CH'
 uci set wireless.radio0.channel='6'
-
-uci set wireless.default_radio0=wifi-iface
-uci set wireless.default_radio0.device='radio0'
-uci set wireless.default_radio0.mode='ap'
 uci set wireless.default_radio0.encryption='psk2'
 uci set wireless.default_radio0.key='iloveipv6'
 uci set wireless.default_radio0.ssid='IPv6 everywhere ${viwib_hostname}'
-uci set wireless.default_radio0.network='wifi'
-
-# Wifi / Router advertisements
-uci set dhcp.wifi=dhcp
-uci set dhcp.wifi.interface='wifi'
-uci set dhcp.wifi.ra='server'
-uci set dhcp.wifi.dynamicdhcp='0'
 
 # Ensure it is not disabled
 uci delete wireless.radio0.disabled
 
-# This is temporary - keeping it until the config process is through
+# Create temporary IPV4 CLIENT on LAN
-# Probably not needet - we can connect to the final IPv6 address!
+# This way we get Internet/upstream from the LAN port
-# This code commented out == The address vanishes due to above reconfiguration
+# Can we do this via IPv6 instead?
-# uci set network.lanv4temp=interface
+# this breaks if multiple viwib are setup, as we have fake / wrong
-# uci set network.lanv4temp.proto='static'
+# dhcp server configurations.
-# uci set network.lanv4temp.ifname='br-lan'
+# easy solution: using two different networks...
-# uci set network.lanv4temp.ipaddr='192.168.61.1'
-# uci set network.lanv4temp.netmask='255.255.255.0'
 
 uci commit
 
 # Need to reboot to restore /etc/resolv.conf
 reboot
 
-#/etc/init.d/network restart
 EOF
 
 # ensure viwib is back
@@ -142,6 +116,7 @@ EOF
 # ensure viwib gives out ipv6 address
 # Found: 30s is not enough for full reconfiguration
 echo "Public VPN key: ${id} ${public_key}"
+
 sleep 60
 
 # change to ipv6
@@ -172,10 +147,10 @@ fi
 
 uci set network.@wireguard_wg0[0]=wireguard_wg0
 uci set network.@wireguard_wg0[0].persistent_keepalive='25'
-uci set network.@wireguard_wg0[0].public_key='${vpn_endpoint_pubkey}'
+uci set network.@wireguard_wg0[0].public_key="${vpn_endpoint_pubkey}"
-uci set network.@wireguard_wg0[0].description='IPv6VPN.ch by ungleich'
+uci set network.@wireguard_wg0[0].description="IPv6VPN.ch by ungleich"
 uci set network.@wireguard_wg0[0].allowed_ips='::/0'
-uci set network.@wireguard_wg0[0].endpoint_host='${vpn_endpoint_host}'
+uci set network.@wireguard_wg0[0].endpoint_host="${vpn_endpoint_host}"
 uci set network.@wireguard_wg0[0].endpoint_port='51820'
 uci set network.@wireguard_wg0[0].route_allowed_ips='1'
 
@@ -213,8 +188,7 @@ uci set firewall.@rule[-1].target='ACCEPT'
 fi
 
 # Add interfaces to the right network zone
-uci set firewall.@zone[0].network='lan lanv6 wifi'
+uci set firewall.@zone[1].network='wan wan6 wg0'
-uci set firewall.@zone[1].network='wg0'
 
 uci commit