diff --git a/openwrt-add-camera-with-mjpg-streamer.sh b/openwrt-add-camera-with-mjpg-streamer.sh
index 33d5fd3..25d98a8 100755
--- a/openwrt-add-camera-with-mjpg-streamer.sh
+++ b/openwrt-add-camera-with-mjpg-streamer.sh
@@ -20,6 +20,27 @@ fi
 cat <<EOF | ssh -t "root@${openwrt_ip}"
 set -x
 
+opkg update
+opkg install mjpg-streamer kmod-video-uvc
+
+uci set mjpg-streamer.core.enabled=1
+uci set mjpg-streamer.core.resolution="1920x1080"
+uci delete  mjpg-streamer.core.username
+uci delete  mjpg-streamer.core.password
+uci commit
+
+/etc/init.d/mjpg-streamer restart
+
+EOF
+
+exit 0
+
+
+# This is old code / when we used motion
+
+cat <<EOF | ssh -t "root@${openwrt_ip}"
+set -x
+
 opkg update
 opkg install motion kmod-video-uvc
 
diff --git a/openwrt-add-gps.sh b/openwrt-add-gps.sh
old mode 100644
new mode 100755
index 772e1e8..ae65aa5
--- a/openwrt-add-gps.sh
+++ b/openwrt-add-gps.sh
@@ -1,5 +1,31 @@
 #!/bin/sh
 
-opkg install kmod-usb-acm
+if [ $# -lt 1 ]; then
+    echo "$0 ip-address"
+    echo "    ip-address: where to find the device"
+    exit 1
+fi
 
-# ugps?
+
+set -x
+
+openwrt_ip=$1; shift
+
+ping -c3 ${openwrt_ip}
+if [ $? -ne 0 ]; then
+    echo "Cannot reach ${openwrt_ip}, aborting"
+    exit 1
+fi
+
+cat <<EOF | ssh -t "root@${openwrt_ip}"
+set -x
+
+opkg update
+opkg install kmod-usb-acm gpsd
+
+uci set gpsd.core.enabled=1
+uci set gpsd.core.listen_globally=1
+uci set gpsd.core.device="/dev/ttyACM0"
+uci commit
+
+EOF
diff --git a/openwrt-add-qmi-lte.sh b/openwrt-add-qmi-lte.sh
new file mode 100755
index 0000000..0f4caae
--- /dev/null
+++ b/openwrt-add-qmi-lte.sh
@@ -0,0 +1,44 @@
+#!/bin/sh
+# Based on work of Samuel Hailu, 2020-09-10
+
+if [ $# -ne 1 ]; then
+    echo "$0 ip-address interface"
+    echo "    ip-address: where to find the OpenWRT device"
+    exit 1
+fi
+
+my_ip=$1; shift
+interface=$1; shift
+
+cat <<EOF | ssh -t "root@${my_ip}"
+set -x
+
+# update the sources & allow https handling
+opkg update
+opkg install libustream-openssl ca-bundle ca-certificates
+
+# Install needed kernel module
+opkg install kmod-usb-net-qmi-wwan uqmi luci-proto-qmi
+
+# opkg install usb-modeswitch kmod-mii kmod-usb-net kmod-usb-wdm kmod-usb-net-qmi-wwan uqmi
+
+# Create interface
+# uci set network.LTE=interface
+# uci set network.LTE.ifname='${interface}'
+# uci set network.LTE.proto='dhcp'
+
+# add to correct firewall zone
+# current_networks=\$(uci get firewall.@zone[1].network)
+
+# if ! echo \$current_networks | grep -q LTE; then
+#    uci set firewall.@zone[1].network='\${current_networks} LTE'
+# fi
+
+# commit
+uci commit
+
+# reboot
+
+reboot
+
+EOF
diff --git a/openwrt-add-temper.sh b/openwrt-add-temper.sh
old mode 100644
new mode 100755
diff --git a/openwrt-add-lte.sh b/openwrt-add-usb-lte.sh
similarity index 100%
rename from openwrt-add-lte.sh
rename to openwrt-add-usb-lte.sh
diff --git a/openwrt-add-wireguard.sh b/openwrt-add-wireguard.sh
new file mode 100755
index 0000000..d44d9e9
--- /dev/null
+++ b/openwrt-add-wireguard.sh
@@ -0,0 +1,63 @@
+#!/bin/sh
+# Nico Schottelius
+# 2020-11-19
+
+if [ $# -lt 4 ]; then
+    echo "$0 ip-address vpn-server ipv6-network [privatekey]"
+    echo "    ip-address: where to find the OpenWRT device"
+    echo "    vpn-server: where to connect to"
+    echo "    vpn-server-pubkey: public key of the server"
+    echo "    ipv6-network: which network to use for us (/48 expected)"
+    echo "    private-key: specify wireguard key optionally"
+    exit 1
+fi
+
+my_ip=$1; shift
+vpn_endpoint_host=$1; shift
+vpn_endpoint_pubkey=$1; shift
+network=$1; shift
+
+# wireguard
+if [ $# -eq 1 ]; then
+    private_key=$1; shift
+else
+    private_key=$(wg genkey)
+fi
+
+my_prefix=$(echo $network | sed 's,::/.*,,')
+my_wireguard_ip=${my_prefix}::42
+
+public_key=$(echo $private_key | wg pubkey)
+
+cat <<EOF | ssh -t "root@${my_ip}"
+set -x
+
+opkg update
+
+opkg install wireguard luci-app-wireguard
+
+# VPN / Wireguard
+uci set network.wg0=interface
+uci set network.wg0.proto='wireguard'
+uci set network.wg0.private_key='${private_key}'
+uci set network.wg0.listen_port='51820'
+uci set network.wg0.addresses='${my_wireguard_ip}/64'
+
+if ! uci get network.@wireguard_wg0[0]; then
+   uci add network wireguard_wg0
+fi
+
+uci set network.@wireguard_wg0[0]=wireguard_wg0
+uci set network.@wireguard_wg0[0].persistent_keepalive='25'
+uci set network.@wireguard_wg0[0].public_key='${vpn_endpoint_pubkey}'
+uci set network.@wireguard_wg0[0].description='IPv6VPN.ch by ungleich'
+uci set network.@wireguard_wg0[0].allowed_ips='::/0'
+uci set network.@wireguard_wg0[0].endpoint_host='${vpn_endpoint_host}'
+uci set network.@wireguard_wg0[0].endpoint_port='51820'
+uci set network.@wireguard_wg0[0].route_allowed_ips='1'
+
+# commit
+uci commit
+reboot
+
+EOF
diff --git a/openwrt-hp-250-g5-add-wifi.sh b/openwrt-hp-250-g5-add-wifi.sh
new file mode 100755
index 0000000..cc26bbc
--- /dev/null
+++ b/openwrt-hp-250-g5-add-wifi.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ $# -lt 1 ]; then
+    echo "$0 ip-address"
+    echo "    ip-address: where to find the device"
+    exit 1
+fi
+
+
+openwrt_ip=$1; shift
+
+ping -c3 ${openwrt_ip}
+if [ $? -ne 0 ]; then
+    echo "Cannot reach ${openwrt_ip}, aborting"
+    exit 1
+fi
+
+cat <<EOF | ssh -t "root@${openwrt_ip}"
+    opkg update
+    opkg install kmod-iwlwifi iwlwifi-firmware-iwl7265d wpa-supplicant
+EOF
diff --git a/viirb-3-configure-vpnendpoint.sh b/viirb-3-configure-vpnendpoint.sh
index ac3b742..8387449 100755
--- a/viirb-3-configure-vpnendpoint.sh
+++ b/viirb-3-configure-vpnendpoint.sh
@@ -52,12 +52,26 @@ git commit -m "[vpn] Updated config for peer ${viirb_hostname} ${my_network}"
 git pull
 git push
 
-cdist config -vv -j8 ${vpn_endpoint_host} -c ${dot_cdist}
+cdist config -v -j8 ${vpn_endpoint_host} -c ${dot_cdist}
 
 # Test that the VPN connection is established
 # Might take longer due to reboot
 sleep 10
 
-ping -c10 ${my_wireguard_ip}
-ping -c10 ${my_lan_ip}
-ping -c90 ${my_wifi_ip}
+i=0
+while [ $i -lt 10 ]; do
+    ping -c1 ${my_wireguard_ip} && break
+    i=$((i+1))
+done
+
+i=0
+while [ $i -lt 10 ]; do
+    ping -c1 ${my_lan_ip} && break
+    i=$((i+1))
+done
+
+i=0
+while [ $i -lt 10 ]; do
+    ping -c1 ${my_wifi_ip} && break
+    i=$((i+1))
+done