ungleich-tools/mikrotik/mikrotik-configure-crs326-dumb.sh
2020-12-12 13:27:49 +01:00

59 lines
1.4 KiB
Bash
Executable file

#!/bin/sh
# Nico Schottelius, 2020-08-03
# Setup a standard crs326
if [ $# -ne 4 ]; then
echo "$0 <current-ip> <new-ipv6-network> <hostname-to-be-setup> <password>"
echo "Example:"
echo "$0 fe80::764d:28ff:fe09:9355%eth1 2a0a:e5c0:2::/64 mikrotik-crs326-8 \$(pass ...)"
exit 1
fi
ip=$1; shift
newip=$1; shift
hostname=$1; shift
password=$1; shift
target=$ip
bridge=bridge
conf() {
echo $@
ssh admin@${target} "$@"
}
commastring() {
echo $@ | sed 's/ /,/g'
}
conf "/system identity set name=$hostname"
conf "/interface bridge add name=$bridge"
################################################################################
# MTU
for i in $(seq 1 24); do
conf "/interface ethernet set ether$i mtu=9200 l2mtu=9204"
conf "/interface bridge port add bridge=$bridge interface=ether$i hw=yes"
done
for i in $(seq 1 2); do
conf "/interface ethernet set sfp-sfpplus$i mtu=9200 l2mtu=9204"
conf "/interface bridge port add bridge=$bridge interface=sfp-sfpplus$i hw=yes"
done
################################################################################
# IPv6 address, password
conf "/ipv6 address add eui-64=yes advertise=no address=$newip interface=$bridge"
conf "/ipv6 address print"
conf "/password old-password=\"\" new-password=$password confirm-new-password=$password"
# Show neigh
conf "/interface bridge host print where !local"
echo "do not forget to set a password"