.gitattributes

@@ -4,5 +4,5 @@
 docs/speeches export-ignore
 docs/video export-ignore
 docs/src/man7 export-ignore
-bin/cdist-build-helper export-ignore
+bin/build-helper export-ignore
 README-maintainers export-ignore

.gitlab-ci.yml

@@ -1,23 +1,20 @@
----
-image: code.ungleich.ch:5050/ungleich-public/cdist/cdist-ci:latest
-
 stages:
     - test
 
-before_script:
-    - ./bin/cdist-build-helper version
-
-shellcheck:
-    stage: test
-    script:
-        - ./bin/cdist-build-helper shellcheck
-
-pycodestyle:
-    stage: test
-    script:
-        - ./bin/cdist-build-helper pycodestyle
+image: code.ungleich.ch:5050/ungleich-public/cdist/cdist-ci:latest
 
 unit_tests:
     stage: test
     script:
-        - ./bin/cdist-build-helper test
+        - ./bin/build-helper version
+        - ./bin/build-helper test
+
+pycodestyle:
+    stage: test
+    script:
+        - ./bin/build-helper pycodestyle
+
+shellcheck:
+    stage: test
+    script:
+        - ./bin/build-helper shellcheck

README-maintainers

@@ -1,4 +1,4 @@
-Maintainers should use ./bin/cdist-build-helper script.
+Maintainers should use ./bin/build-helper script.
 
 Makefile is intended for end users. It can be used for non-maintaining
 targets that can be run from pure source (without git repository).

bin/build-helper

@@ -45,7 +45,7 @@ usage() {
         shellcheck-manifests
         shellcheck-local-gencodes
         shellcheck-remote-gencodes
-        shellcheck-bin
+        shellcheck-scripts
         shellcheck-gencodes
         shellcheck-types
         shellcheck
@@ -100,7 +100,7 @@ case "$option" in
                     if (\$0 ~ /^$end/) {
                         exit
                     } else {
-                        print \$0
+                        print \$0 
                     }
                 }
             }" "$basedir/docs/changelog"
@@ -135,7 +135,7 @@ case "$option" in
 
         version=$1; shift
 
-        (
+        ( 
         cat << eof
 Subject: cdist $version has been released
 
@@ -336,7 +336,7 @@ eof
         make docs-clean
         make docs
 
-        #############################################################
+        ############################################################# 
         # Everything green, let's do the release
 
         # Tag the current commit
@@ -371,6 +371,7 @@ eof
 Manual steps post release:
     - cdist-web
     - send generated mailinglist.tmp mail
+    - twitter
 eof
     ;;
 
@@ -405,7 +406,7 @@ eof
     ;;
 
     pycodestyle|pep8)
-        pycodestyle "${basedir}" "${basedir}/bin/cdist"
+        pycodestyle "${basedir}" "${basedir}/scripts/cdist"
     ;;
 
     check-pycodestyle)
@@ -460,34 +461,27 @@ eof
         test ! -s "${SHELLCHECKTMP}" || { cat "${SHELLCHECKTMP}"; exit 1; }
     ;;
 
-    # NOTE: shellcheck-scripts is kept for compatibility
-    shellcheck-bin|shellcheck-scripts)
+    shellcheck-scripts)
         # shellcheck disable=SC2086
-        ${SHELLCHECKCMD} bin/cdist-dump bin/cdist-new-type > "${SHELLCHECKTMP}"
+        ${SHELLCHECKCMD} scripts/cdist-dump scripts/cdist-new-type > "${SHELLCHECKTMP}"
         test ! -s "${SHELLCHECKTMP}" || { cat "${SHELLCHECKTMP}"; exit 1; }
     ;;
 
     shellcheck-gencodes)
-        errors=false
-        "$0" shellcheck-local-gencodes || errors=true
-        "$0" shellcheck-remote-gencodes || errors=true
-        ! $errors || exit 1
+        "$0" shellcheck-local-gencodes || exit 1
+        "$0" shellcheck-remote-gencodes || exit 1
     ;;
 
     shellcheck-types)
-        errors=false
-        "$0" shellcheck-type-explorers || errors=true
-        "$0" shellcheck-manifests || errors=true
-        "$0" shellcheck-gencodes || errors=true
-        ! $errors || exit 1
+        "$0" shellcheck-type-explorers || exit 1
+        "$0" shellcheck-manifests || exit 1
+        "$0" shellcheck-gencodes || exit 1
     ;;
 
     shellcheck)
-        errors=false
-        "$0" shellcheck-global-explorers || errors=true
-        "$0" shellcheck-types || errors=true
-        "$0" shellcheck-bin || errors=true
-        ! $errors || exit 1
+        "$0" shellcheck-global-explorers || exit 1
+        "$0" shellcheck-types || exit 1
+        "$0" shellcheck-scripts || exit 1
     ;;
 
     shellcheck-type-files)
@@ -497,14 +491,12 @@ eof
     ;;
 
     shellcheck-with-files)
-        errors=false
-        "$0" shellcheck || errors=true
-        "$0" shellcheck-type-files || errors=true
-        ! $errors || exit 1
+        "$0" shellcheck || exit 1
+        "$0" shellcheck-type-files || exit 1
     ;;
 
     shellcheck-build-helper)
-        ${SHELLCHECKCMD} ./bin/cdist-build-helper
+        ${SHELLCHECKCMD} ./bin/build-helper
     ;;
 
     check-shellcheck)

bin/cdist

@@ -1,8 +1,7 @@
-#!/usr/bin/env python3
+#!/bin/sh
 # -*- coding: utf-8 -*-
 #
-# 2010-2016 Nico Schottelius (nico-cdist at schottelius.org)
-# 2016 Darko Poljak (darko.poljak at gmail.com)
+# 2012 Nico Schottelius (nico-cdist at schottelius.org)
 #
 # This file is part of cdist.
 #
@@ -21,81 +20,14 @@
 #
 #
 
-import logging
-import os
-import sys
+# Wrapper for real script to allow execution from checkout
+dir=${0%/*}
 
-# See if this file's parent is cdist module
-# and if so add it to module search path.
-cdist_dir = os.path.realpath(
-    os.path.join(
-        os.path.dirname(os.path.realpath(__file__)),
-        os.pardir))
-cdist_init_dir = os.path.join(cdist_dir, 'cdist', '__init__.py')
-if os.path.exists(cdist_init_dir):
-    sys.path.insert(0, cdist_dir)
+# Ensure version is present - the bundled/shipped version contains a static version,
+# the git version contains a dynamic version
+"$dir/build-helper" version
 
-import cdist            # noqa 402
-import cdist.argparse   # noqa 402
-import cdist.banner     # noqa 402
-import cdist.config     # noqa 402
-import cdist.install    # noqa 402
-import cdist.shell      # noqa 402
-import cdist.inventory  # noqa 402
+libdir=$(cd "${dir}/../" && pwd -P)
+export PYTHONPATH="${libdir}"
 
-
-def commandline():
-    """Parse command line"""
-
-    # preos subcommand hack
-    if len(sys.argv) > 1 and sys.argv[1] == 'preos':
-        return cdist.preos.PreOS.commandline(sys.argv[1:])
-    parser, cfg = cdist.argparse.parse_and_configure(sys.argv[1:])
-    args = cfg.get_args()
-
-    # Work around python 3.3 bug:
-    # http://bugs.python.org/issue16308
-    # http://bugs.python.org/issue9253
-
-    # FIXME: catching AttributeError also hides
-    # real problems.. try a different way
-
-    # FIXME: we always print main help, not
-    # the help of the actual parser being used!
-    try:
-        getattr(args, "func")
-    except AttributeError:
-        parser['main'].print_help()
-        sys.exit(0)
-
-    args.func(args)
-
-
-if __name__ == "__main__":
-    if sys.version < cdist.MIN_SUPPORTED_PYTHON_VERSION:
-        print('Python >= {} is required on the source host.'.format(
-                cdist.MIN_SUPPORTED_PYTHON_VERSIO), file=sys.stderr)
-        sys.exit(1)
-
-    exit_code = 0
-
-    try:
-        import re
-        import os
-
-        if re.match("__", os.path.basename(sys.argv[0])):
-            import cdist.emulator
-            emulator = cdist.emulator.Emulator(sys.argv)
-            emulator.run()
-        else:
-            commandline()
-
-    except KeyboardInterrupt:
-        exit_code = 2
-
-    except cdist.Error as e:
-        log = logging.getLogger("cdist")
-        log.error(e)
-        exit_code = 1
-
-    sys.exit(exit_code)
+"$dir/../scripts/cdist" "$@"

cdist/__init__.py

@@ -22,27 +22,12 @@
 
 import os
 import hashlib
-import subprocess
 
 import cdist.log
+import cdist.version
 
 
-VERSION = 'unknown version'
-
-try:
-    import cdist.version
-    VERSION = cdist.version.VERSION
-except ModuleNotFoundError:
-    cdist_dir = os.path.abspath(
-        os.path.join(os.path.dirname(__file__), os.pardir))
-    if os.path.isdir(os.path.join(cdist_dir, '.git')):
-        try:
-            VERSION = subprocess.check_output(
-                ['git', 'describe', '--always'],
-                cwd=cdist_dir,
-                universal_newlines=True)
-        except Exception:
-            pass
+VERSION = cdist.version.VERSION
 
 BANNER = """
              ..          .       .x+=:.        s

cdist/argparse.py

@@ -8,11 +8,10 @@ import cdist.configuration
 import cdist.log
 import cdist.preos
 import cdist.info
-import cdist.scan.commandline
 
 
 # set of beta sub-commands
-BETA_COMMANDS = set(('install', 'inventory', 'scan', ))
+BETA_COMMANDS = set(('install', 'inventory', ))
 # set of beta arguments for sub-commands
 BETA_ARGS = {
     'config': set(('tag', 'all_tagged_hosts', 'use_archiving', )),
@@ -274,7 +273,8 @@ def get_parsers():
             '-f', '--file',
             help=('Read specified file for a list of additional hosts to '
                   'operate on or if \'-\' is given, read stdin (one host per '
-                  'line).'),
+                  'line). If no host or host file is specified then, by '
+                  'default, read hosts from stdin.'),
             dest='hostfile', required=False)
     parser['config_args'].add_argument(
            '-p', '--parallel', nargs='?', metavar='HOST_MAX',
@@ -326,7 +326,9 @@ def get_parsers():
     parser['add-host'].add_argument(
            '-f', '--file',
            help=('Read additional hosts to add from specified file '
-                 'or from stdin if \'-\' (each host on separate line). '),
+                 'or from stdin if \'-\' (each host on separate line). '
+                 'If no host or host file is specified then, by default, '
+                 'read from stdin.'),
            dest='hostfile', required=False)
 
     parser['add-tag'] = parser['invsub'].add_parser(
@@ -340,12 +342,20 @@ def get_parsers():
     parser['add-tag'].add_argument(
            '-f', '--file',
            help=('Read additional hosts to add tags from specified file '
-                 'or from stdin if \'-\' (each host on separate line). '),
+                 'or from stdin if \'-\' (each host on separate line). '
+                 'If no host or host file is specified then, by default, '
+                 'read from stdin. If no tags/tagfile nor hosts/hostfile'
+                 ' are specified then tags are read from stdin and are'
+                 ' added to all hosts.'),
            dest='hostfile', required=False)
     parser['add-tag'].add_argument(
            '-T', '--tag-file',
            help=('Read additional tags to add from specified file '
-                 'or from stdin if \'-\' (each tag on separate line). '),
+                 'or from stdin if \'-\' (each tag on separate line). '
+                 'If no tag or tag file is specified then, by default, '
+                 'read from stdin. If no tags/tagfile nor hosts/hostfile'
+                 ' are specified then tags are read from stdin and are'
+                 ' added to all hosts.'),
            dest='tagfile', required=False)
     parser['add-tag'].add_argument(
            '-t', '--taglist',
@@ -366,7 +376,9 @@ def get_parsers():
     parser['del-host'].add_argument(
             '-f', '--file',
             help=('Read additional hosts to delete from specified file '
-                  'or from stdin if \'-\' (each host on separate line). '),
+                  'or from stdin if \'-\' (each host on separate line). '
+                  'If no host or host file is specified then, by default, '
+                  'read from stdin.'),
             dest='hostfile', required=False)
 
     parser['del-tag'] = parser['invsub'].add_parser(
@@ -384,13 +396,20 @@ def get_parsers():
     parser['del-tag'].add_argument(
             '-f', '--file',
             help=('Read additional hosts to delete tags for from specified '
-                  'file or from stdin if \'-\' (each host on separate '
-                  'line). '),
+                  'file or from stdin if \'-\' (each host on separate line). '
+                  'If no host or host file is specified then, by default, '
+                  'read from stdin. If no tags/tagfile nor hosts/hostfile'
+                  ' are specified then tags are read from stdin and are'
+                  ' deleted from all hosts.'),
             dest='hostfile', required=False)
     parser['del-tag'].add_argument(
             '-T', '--tag-file',
             help=('Read additional tags from specified file '
-                  'or from stdin if \'-\' (each tag on separate line). '),
+                  'or from stdin if \'-\' (each tag on separate line). '
+                  'If no tag or tag file is specified then, by default, '
+                  'read from stdin. If no tags/tagfile nor'
+                  ' hosts/hostfile are specified then tags are read from'
+                  ' stdin and are added to all hosts.'),
             dest='tagfile', required=False)
     parser['del-tag'].add_argument(
             '-t', '--taglist',
@@ -471,35 +490,6 @@ def get_parsers():
             'pattern', nargs='?', help='Glob pattern.')
     parser['info'].set_defaults(func=cdist.info.Info.commandline)
 
-    # Scan = config + further
-    parser['scan'] = parser['sub'].add_parser('scan', add_help=False,
-                                              parents=[parser['config']])
-
-    parser['scan'] = parser['sub'].add_parser(
-            'scan', parents=[parser['loglevel'],
-                             parser['beta'],
-                             parser['colored_output'],
-                             parser['common'],
-                             parser['config_main']])
-
-    parser['scan'].add_argument(
-        '-m', '--mode', help='Which modes should run',
-        action='append', default=[],
-        choices=['scan', 'trigger'])
-    parser['scan'].add_argument(
-        '--config',
-        action='store_true',
-        help='Try to configure detected hosts')
-    parser['scan'].add_argument(
-        '-I', '--interfaces',
-        action='append',  default=[],
-        help='On which interfaces to scan/trigger')
-    parser['scan'].add_argument(
-        '-d', '--delay',
-        action='store',  default=3600,
-        help='How long to wait before reconfiguring after last try')
-    parser['scan'].set_defaults(func=cdist.scan.commandline.commandline)
-
     for p in parser:
         parser[p].epilog = EPILOG
 

cdist/conf/explorer/os_version

@@ -70,11 +70,6 @@ case "$("$__explorer/os")" in
    macosx)
       sw_vers -productVersion
    ;;
-   freebsd)
-      # Apparently uname -r is not a reliable way to get the patch level.
-      # See: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=251743
-      freebsd-version
-   ;;
    *bsd|solaris)
       uname -r
    ;;

cdist/conf/type/__acl/explorer/checks

@@ -1,7 +1,6 @@
 #!/bin/sh -e
-# __locale/explorer/state
 #
-# 2020 Matthias Stecher (matthiasstecher at gmx.de)
+# 2019 Ander Punnar (ander-at-kvlt-dot-ee)
 #
 # This file is part of cdist.
 #
@@ -18,19 +17,23 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
-#
-# Check if the locale is already installed on the system.
-# Outputs 'present' or 'absent' depending if the locale exists.
-#
 
+# TODO check if filesystem has ACL turned on etc
 
-# Get user-defined locale
-# locale name is echoed differently than the user propably set it (for UTF-8)
-locale="$(echo "$__object_id" | sed 's/UTF-8/utf8/')"
+if [ -f "$__object/parameter/acl" ]
+then
+    grep -E '^(default:)?(user|group):' "$__object/parameter/acl" \
+    | while read -r acl
+    do
+        param="$( echo "$acl" | awk -F: '{print $(NF-2)}' )"
+        check="$( echo "$acl" | awk -F: '{print $(NF-1)}' )"
 
-# Check if the given locale exists on the system
-if localedef --list-archive | grep -qFx "$locale"; then
-    echo present
-else
-    echo absent
+        [ "$param" = 'user' ] && db=passwd || db="$param"
+
+        if ! getent "$db" "$check" > /dev/null
+        then
+            echo "missing $param '$check'" >&2
+            exit 1
+        fi
+    done
 fi

cdist/conf/type/__acl/explorer/getent

@@ -1,4 +0,0 @@
-#!/bin/sh -e
-
-getent passwd | awk -F: '{print "user:"$1}'
-getent group | awk -F: '{print "group:"$1}'

cdist/conf/type/__acl/gencode-remote

@@ -22,8 +22,8 @@ file_is="$( cat "$__object/explorer/file_is" )"
 
 if [ "$file_is" = 'missing' ] \
     && [ -z "$__cdist_dry_run" ] \
-    && [ ! -f "$__object/parameter/file" ] \
-    && [ ! -f "$__object/parameter/directory" ]
+    && \( [ ! -f "$__object/parameter/file" ] \
+        || [ ! -f "$__object/parameter/directory" ] \)
 then
     exit 0
 fi
@@ -47,26 +47,28 @@ then
 elif [ -f "$__object/parameter/entry" ]
 then
     acl_should="$( cat "$__object/parameter/entry" )"
+elif [ -f "$__object/parameter/acl" ]
+then
+    acl_should="$( cat "$__object/parameter/acl" )"
+elif
+    [ -f "$__object/parameter/user" ] \
+        || [ -f "$__object/parameter/group" ] \
+        || [ -f "$__object/parameter/mask" ] \
+        || [ -f "$__object/parameter/other" ]
+then
+    acl_should="$( for param in user group mask other
+    do
+        [ ! -f "$__object/parameter/$param" ] && continue
+
+        echo "$param" | grep -Eq 'mask|other' && sep=:: || sep=:
+
+        echo "$param$sep$( cat "$__object/parameter/$param" )"
+    done )"
 else
     echo 'no parameters set' >&2
     exit 1
 fi
 
-# instead of setfacl's non-helpful message "Option -m: Invalid argument near character X"
-# let's check if target has necessary users and groups, since mistyped or missing
-# users/groups in target is most common reason.
-echo "$acl_should" \
-    | grep -Po '(user|group):[^:]+' \
-    | sort -u \
-    | while read -r l
-    do
-        if ! grep "$l" -Fxq "$__object/explorer/getent"
-        then
-            echo "no $l' in target" | sed "s/:/ '/" >&2
-            exit 1
-        fi
-    done
-
 if [ -f "$__object/parameter/default" ]
 then
     acl_should="$( echo "$acl_should" \

cdist/conf/type/__acl/man.rst

@@ -12,14 +12,11 @@ Fully supported and tested on Linux (ext4 filesystem), partial support for FreeB
 
 See ``setfacl`` and ``acl`` manpages for more details.
 
-One of ``--entry`` or ``--source`` must be used.
 
-
-OPTIONAL MULTIPLE PARAMETERS
+REQUIRED MULTIPLE PARAMETERS
 ----------------------------
 entry
    Set ACL entry following ``getfacl`` output syntax.
-   Must be used if ``--source`` is not used.
 
 
 OPTIONAL PARAMETERS
@@ -28,7 +25,6 @@ source
    Read ACL entries from stdin or file.
    Ordering of entries is not important.
    When reading from file, comments and empty lines are ignored.
-   Must be used if ``--entry`` is not used.
 
 file
    Create/change file with ``__file`` using ``user:group:mode`` pattern.
@@ -52,6 +48,12 @@ remove
    ``mask`` and ``other`` entries can't be removed, but only changed.
 
 
+DEPRECATED PARAMETERS
+---------------------
+Parameters ``acl``, ``user``, ``group``, ``mask`` and ``other`` are deprecated and they
+will be removed in future versions. Please use ``entry`` parameter instead.
+
+
 EXAMPLES
 --------
 

cdist/conf/type/__acl/parameter/deprecated/acl

@@ -0,0 +1 @@
+see manual for details

cdist/conf/type/__acl/parameter/deprecated/group

@@ -0,0 +1 @@
+see manual for details

cdist/conf/type/__acl/parameter/deprecated/mask

@@ -0,0 +1 @@
+see manual for details

cdist/conf/type/__acl/parameter/deprecated/other

@@ -0,0 +1 @@
+see manual for details

cdist/conf/type/__acl/parameter/deprecated/user

@@ -0,0 +1 @@
+see manual for details

cdist/conf/type/__acl/parameter/optional

@@ -1,3 +1,5 @@
+mask
+other
 source
 file
 directory

cdist/conf/type/__acl/parameter/optional_multiple

@@ -1 +1,4 @@
 entry
+acl
+user
+group

cdist/conf/type/__apt_backports/man.rst

@@ -1,104 +0,0 @@
-cdist-type__debian_backports(7)
-===============================
-
-NAME
-----
-cdist-type__apt_backports - Install backports
-
-
-DESCRIPTION
------------
-This singleton type installs backports for the current OS release.
-It aborts if backports are not supported for the specified OS or
-no version codename could be fetched (like Debian unstable).
-
-The package index will be automatically updated if required.
-
-It supports backports from following OSes:
-
-- Debian
-- Devuan
-- Ubuntu
-
-
-REQUIRED PARAMETERS
--------------------
-None.
-
-
-OPTIONAL PARAMETERS
--------------------
-state
-    Represents the state of the backports repository. ``present`` or
-    ``absent``, defaults to ``present``.
-
-    Will be directly passed to :strong:`cdist-type__apt_source`\ (7).
-
-mirror
-    The mirror to fetch the backports from. Will defaults to the generic
-    mirror of the current OS.
-
-    Will be directly passed to :strong:`cdist-type__apt_source`\ (7).
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-MESSAGES
---------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-   # setup the backports
-   __apt_backports
-   __apt_backports --state absent
-   __apt_backports --state present --mirror "http://ftp.de.debian.org/debian/"
-
-   # install a backports package
-   # currently for the buster release backports
-   require="__apt_backports" __package_apt wireguard \
-        --target-release buster-backports
-
-
-ABORTS
-------
-Aborts if the detected os is not Debian.
-
-Aborts if no distribuition codename could be detected. This is common for the
-unstable distribution, but there is no backports repository for it already.
-
-
-CAVEATS
--------
-For Ubuntu, it setup all componenents for the backports repository: ``main``,
-``restricted``, ``universe`` and ``multiverse``. The user may not want to
-install proprietary packages, which will only be installed if the user
-explicitly uses the backports target-release. The user may change this behavior
-to install backports packages without the need of explicitly select it.
-
-
-SEE ALSO
---------
-`Official Debian Backports site <https://backports.debian.org/>`_
-
-:strong:`cdist-type__apt_source`\ (7)
-
-
-AUTHORS
--------
-Matthias Stecher <matthiasstecher at gmx.de>
-
-
-COPYING
--------
-Copyright \(C) 2020 Matthias Stecher. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__apt_backports/manifest

@@ -1,81 +0,0 @@
-#!/bin/sh -e
-# __apt_backports/manifest
-#
-# 2020 Matthias Stecher (matthiasstecher at gmx.de)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-#
-# Enables/disables backports repository. Utilises __apt_source for it.
-#
-
-
-# Get the distribution codename by /etc/os-release.
-#  is already executed in a subshell by string substitution
-#  lsb_release may not be given in all installations
-codename_os_release() {
-    # shellcheck disable=SC1090
-    . "$__global/explorer/os_release"
-    printf "%s" "$VERSION_CODENAME"
-}
-
-# detect backport distribution
-os="$(cat "$__global/explorer/os")"
-case "$os" in
-    debian)
-        dist="$( codename_os_release )"
-        components="main"
-        mirror="http://deb.debian.org/debian/"
-        ;;
-    devuan)
-        dist="$( codename_os_release )"
-        components="main"
-        mirror="http://deb.devuan.org/merged"
-        ;;
-    ubuntu)
-        dist="$( codename_os_release )"
-        components="main restricted universe multiverse"
-        mirror="http://archive.ubuntu.com/ubuntu"
-        ;;
-
-    *)
-        printf "Backports for %s are not supported!\n" "$os" >&2
-        exit 1
-        ;;
-esac
-
-# error if no codename given (e.g. on Debian unstable)
-if [ -z "$dist" ]; then
-    printf "No backports for unkown version of distribution %s!\n" "$os" >&2
-    exit 1
-fi
-
-
-# parameters
-state="$(cat "$__object/parameter/state")"
-
-# mirror already set for the os, only override user-values
-if [ -f "$__object/parameter/mirror" ]; then
-    mirror="$(cat "$__object/parameter/mirror")"
-fi
-
-
-# install the given backports repository
-__apt_source "${dist}-backports" \
-    --state "$state" \
-    --distribution "${dist}-backports" \
-    --component "$components" \
-    --uri "$mirror"

cdist/conf/type/__apt_backports/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__apt_backports/parameter/optional

@@ -1,2 +0,0 @@
-state
-mirror

cdist/conf/type/__apt_norecommends/man.rst

@@ -32,12 +32,11 @@ EXAMPLES
 AUTHORS
 -------
 Steven Armstrong <steven-cdist--@--armstrong.cc>
-Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
 
 
 COPYING
 -------
-Copyright \(C) 2014 Steven Armstrong, 2020 Dennis Camera.
-You can redistribute it and/or modify it under the terms of the GNU General
-Public License as published by the Free Software Foundation, either version 3 of
-the License, or (at your option) any later version.
+Copyright \(C) 2014 Steven Armstrong. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__apt_norecommends/manifest

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 #
 # 2014 Steven Armstrong (steven-cdist at armstrong.cc)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -20,28 +19,26 @@
 #
 
 
-os=$(cat "${__global:?}/explorer/os")
+os=$(cat "$__global/explorer/os")
 
-case ${os}
-in
-	(ubuntu|debian|devuan)
-		__file /etc/apt/apt.conf.d/00InstallRecommends --state present \
-			--owner root --group root --mode 0644 --source - <<-'EOF'
-		APT::Install-Recommends "false";
-		APT::Install-Suggests "false";
-		APT::AutoRemove::RecommendsImportant "false";
-		APT::AutoRemove::SuggestsImportant "false";
-		EOF
-
-		# TODO: Remove the following object after some time
-		require=__file/etc/apt/apt.conf.d/00InstallRecommends \
-		__file /etc/apt/apt.conf.d/99-no-recommends --state absent
-		;;
-	(*)
-		cat >&2 <<EOF
+case "$os" in
+   ubuntu|debian|devuan)
+      # No stinking recommends thank you very much.
+      # If I want something installed I will do so myself.
+      __file /etc/apt/apt.conf.d/99-no-recommends \
+         --owner root --group root --mode 644 \
+         --source - << DONE
+APT::Install-Recommends "0";
+APT::Install-Suggests "0";
+APT::AutoRemove::RecommendsImportant "0";
+APT::AutoRemove::SuggestsImportant "0";
+DONE
+   ;;
+   *)
+      cat >&2 << DONE
 The developer of this type (${__type##*/}) did not think your operating system
 ($os) would have any use for it. If you think otherwise please submit a patch.
-EOF
-		exit 1
-		;;
+DONE
+      exit 1
+   ;;
 esac

cdist/conf/type/__block/gencode-remote

@@ -46,29 +46,28 @@ fi
 
 remove_block() {
    cat << DONE
-tmpfile=\$(mktemp ${quoted_file}.cdist.XXXXXXXXXX)
+tmpfile=\$(mktemp ${file}.cdist.XXXXXXXXXX)
 # preserve ownership and permissions of existing file
-if [ -f $quoted_file ]; then
-   cp -p $quoted_file "\$tmpfile"
+if [ -f "$file" ]; then
+   cp -p "$file" "\$tmpfile"
 fi
-awk -v prefix=$(quote "$prefix") -v suffix=$(quote "$suffix") '
+awk -v prefix=^$(quote "$prefix")\$ -v suffix=^$(quote "$suffix")\$ '
 {
-   if (\$0 == prefix) {
+   if (match(\$0,prefix)) {
       triggered=1
    }
    if (triggered) {
-      if (\$0 == suffix) {
+      if (match(\$0,suffix)) {
          triggered=0
       }
    } else {
       print
    }
-}' $quoted_file > "\$tmpfile"
-mv -f "\$tmpfile" $quoted_file
+}' "$file" > "\$tmpfile"
+mv -f "\$tmpfile" "$file"
 DONE
 }
 
-quoted_file="$(quote "$file")"
 case "$state_should" in
    present)
       if [ "$state_is" = "changed" ]; then
@@ -78,7 +77,7 @@ case "$state_should" in
          echo add >> "$__messages_out"
       fi
       cat << DONE
-cat >> $quoted_file << '${__type##*/}_DONE'
+cat >> "$file" << ${__type##*/}_DONE
 $(cat "$block")
 ${__type##*/}_DONE
 DONE

cdist/conf/type/__dot_file/man.rst

@@ -25,9 +25,6 @@ user
 OPTIONAL PARAMETERS
 -------------------
 
-dirmode
-    forwarded to :strong:`__directory` type as mode
-
 mode
     forwarded to :strong:`__file` type
 

cdist/conf/type/__dot_file/manifest

@@ -19,7 +19,6 @@ set -eu
 user="$(cat "${__object}/parameter/user")"
 home="$(cat "${__object}/explorer/home")"
 primary_group="$(cat "${__object}/explorer/primary_group")"
-dirmode="$(cat "${__object}/parameter/dirmode")"
 
 # Create parent directory. Type __directory has flag 'parents', but it
 # will leave us with root-owned directory in user home, which is not
@@ -37,7 +36,6 @@ export CDIST_ORDER_DEPENDENCY
 for dir ; do
 	__directory "${home}/${dir}"   \
 	    --group "${primary_group}" \
-            --mode "${dirmode}" \
 	    --owner "${user}"
 done
 

cdist/conf/type/__dot_file/parameter/default/dirmode

@@ -1 +0,0 @@
-0700

cdist/conf/type/__dot_file/parameter/optional

@@ -1,4 +1,3 @@
 state
 mode
 source
-dirmode

cdist/conf/type/__download/man.rst

@@ -69,8 +69,7 @@ EXAMPLES
 
     require='__download/opt/cpma/cnq3.zip' \
         __unpack /opt/cpma/cnq3.zip \
-            --backup-destination \
-            --preserve-archive \
+            --move-existing-destination \
             --destination /opt/cpma/server
 
 

cdist/conf/type/__dpkg_architecture/explorer/architecture

@@ -1,26 +0,0 @@
-#!/bin/sh -e
-# __dpkg_architecture/explorer/architecture
-#
-# 2020 Matthias Stecher <matthiasstecher at gmx.de>
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# Get the main architecture of this machine
-
-
-# print or die in the gencode-remote
-dpkg --print-architecture || true

cdist/conf/type/__dpkg_architecture/explorer/foreign-architectures

@@ -1,26 +0,0 @@
-#!/bin/sh -e
-# __dpkg_architecture/explorer/foreign-architectures
-#
-# 2020 Matthias Stecher <matthiasstecher at gmx.de>
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# Print all additional architectures
-
-
-# print or die in the gencode-remote
-dpkg --print-foreign-architectures || true

cdist/conf/type/__dpkg_architecture/gencode-remote

@@ -1,82 +0,0 @@
-#!/bin/sh -e
-# __dpkg_architecture/gencode-remote
-#
-# 2020 Matthias Stecher <matthiasstecher at gmx.de>
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-
-# Get parameter and explorer
-state_should="$(cat "$__object/parameter/state")"
-arch_wanted="$__object_id"
-main_arch="$(cat "$__object/explorer/architecture")"
-
-# Exit here if dpkg do not work (empty explorer)
-if [ -z "$main_arch" ]; then
-    echo "dpkg is not available or unable to detect a architecture!" >&2
-    exit 1
-fi
-
-
-# Check if requested architecture is the main one
-if [ "$arch_wanted" = "$main_arch" ]; then
-    # higher than present; we can not remove it
-    state_is="present"
-    caution="yes"
-
-# Check if the architecture not already used
-elif grep -qFx "$arch_wanted" "$__object/explorer/foreign-architectures"; then
-    state_is="present"
-
-# arch does not exist
-else
-    state_is="absent"
-fi
-
-
-# Check what to do
-if [ "$state_is" != "$state_should" ]; then
-    case "$state_should" in
-        present)
-            # print add code
-            printf "dpkg --add-architecture '%s'\n" "$arch_wanted"
-            # updating the index to make the new architecture available
-            echo "apt update"
-
-            echo added >> "$__messages_out"
-            ;;
-
-        absent)
-            if [ "$caution" ]; then
-                printf "can not remove the main arch '%s' of the system!\n" "$main_arch" >&2
-                exit 1
-            fi
-
-            # removing all existing packages for the architecture
-            printf "apt purge '.*:%s'\n" "$arch_wanted"
-            # print remove code
-            printf "dpkg --remove-architecture '%s'\n" "$arch_wanted"
-
-            echo removed >> "$__messages_out"
-            ;;
-
-        *)
-            printf "state '%s' is unknown!\n" "$state_should" >&2
-            exit 1
-            ;;
-    esac
-fi

cdist/conf/type/__dpkg_architecture/man.rst

@@ -1,103 +0,0 @@
-cdist-type__dpkg_architecture(7)
-================================
-
-NAME
-----
-cdist-type__dpkg_architecture - Handles foreign architectures on debian-like
-systems managed by `dpkg`
-
-
-DESCRIPTION
------------
-This type handles foreign architectures on systems managed by
-:strong:`dpkg`\ (1). The object id is the name of the architecture accepted by
-`dpkg`, which should be added or removed.
-
-If the architecture is not setup on the system, it adds a new architecture as a
-new foreign architecture in `dpkg`. Then, it updates the apt package index to
-make packages from the new architecture available.
-
-If the architecture should be removed, it will remove it if it is not the base
-architecture on where the system was installed on. Before it, it will purge
-every package based on the "to be removed" architecture via `apt` to be able to
-remove the selected architecture.
-
-
-REQUIRED PARAMETERS
--------------------
-None.
-
-
-OPTIONAL PARAMETERS
--------------------
-state
-    ``present`` or ``absent``. Defaults to ``present``.
-
-
-MESSAGES
---------
-added
-   Added the specified architecture
-
-removed
-   Removed the specified architecture
-
-
-ABORTS
-------
-Aborts in the following cases:
-
-If :strong:`dpkg`\ (1) is not available. It will abort with a proper error
-message.
-
-If the architecture is the same as the base architecture the system is build
-upon it (returned by ``dpkg --print-architecture``) and it should be removed.
-
-It will fail if it can not execute :strong:`apt`\ (8). It is assumed that it is
-already installed.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-  # add i386 (32 bit) architecture
-  __dpkg_architecture i386
-
-  # remove it again :)
-  __dpkg_architecture i386 --state absent
-
-
-SEE ALSO
---------
-`Multiarch on Debian systems <https://wiki.debian.org/Multiarch>`_
-
-`How to setup multiarch on Debian <https://wiki.debian.org/Multiarch/HOWTO>`_
-
-:strong:`dpkg`\ (1)
-:strong:`cdist-type__package_dpkg`\ (7)
-:strong:`cdist-type__package_apt`\ (7)
-
-Useful commands:
-
-.. code-block:: sh
-
-   # base architecture installed on this system
-   dpkg --print-architecture
-
-   # extra architectures added
-   dpkg --print-foreign-architectures
-
-
-AUTHORS
--------
-Matthias Stecher <matthiasstecher at gmx.de>
-
-
-COPYING
--------
-Copyright \(C) 2020 Matthias Stecher. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-ublished by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__dpkg_architecture/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__dpkg_architecture/parameter/optional

@@ -1 +0,0 @@
-state

cdist/conf/type/__file/gencode-remote

@@ -87,6 +87,11 @@ case "$state_should" in
         fi
     ;;
 
+    pre-exists)
+        # pre-exists should never reach gencode-remote…
+        exit 1
+   ;;
+
     absent)
         if [ "$type" = "file" ]; then
             echo "rm -f '$destination'"
@@ -95,10 +100,6 @@ case "$state_should" in
         fi
     ;;
 
-    pre-exists)
-        :
-        ;;
-
     *)
         echo "Unknown state: $state_should" >&2
         exit 1

cdist/conf/type/__hostname/gencode-remote

@@ -20,27 +20,26 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-os=$(cat "${__global:?}/explorer/os")
-name_running=$(cat "${__global:?}/explorer/hostname")
-has_hostnamectl=$(cat "${__object:?}/explorer/has_hostnamectl")
+os=$(cat "$__global/explorer/os")
+name_running=$(cat "$__global/explorer/hostname")
+has_hostnamectl=$(cat "$__object/explorer/has_hostnamectl")
 
 
-if test -s "${__object:?}/parameter/name"
+if test -s "$__object/parameter/name"
 then
-    name_should=$(cat "${__object:?}/parameter/name")
+    name_should=$(cat "$__object/parameter/name")
 else
-    case ${os}
+    case $os
     in
         # RedHat-derivatives and BSDs
-        (centos|fedora|redhat|scientific|freebsd|macosx|netbsd|openbsd)
+        centos|fedora|redhat|scientific|freebsd|macosx|netbsd|openbsd)
             # Hostname is FQDN
-            name_should=${__target_host:?}
-            ;;
-        (*)
+            name_should="${__target_host}"
+        ;;
+        *)
             # Hostname is only first component of FQDN
-            name_should=${__target_host:?}
-            name_should=${name_should%%.*}
-            ;;
+            name_should="${__target_host%%.*}"
+        ;;
     esac
 fi
 
@@ -48,46 +47,43 @@ fi
 ################################################################################
 # Check if the (running) hostname is already correct
 #
-test "${name_running}" != "${name_should}" || exit 0
+test "$name_running" != "$name_should" || exit 0
 
 
 ################################################################################
 # Setup hostname
 #
-echo 'changed' >>"${__messages_out:?}"
+echo 'changed' >>"$__messages_out"
 
 # Use the good old way to set the hostname.
-case ${os}
+case $os
 in
-    (alpine|debian|devuan|ubuntu)
+    alpine|debian|devuan|ubuntu)
         echo 'hostname -F /etc/hostname'
-        ;;
-    (archlinux)
+    ;;
+    archlinux)
         echo 'command -v hostnamectl >/dev/null 2>&1' \
-            "&& hostnamectl set-hostname '${name_should}'" \
-            "|| hostname '${name_should}'"
-        ;;
-    (centos|fedora|redhat|scientific|freebsd|netbsd|openbsd|gentoo|void)
-        echo "hostname '${name_should}'"
-        ;;
-    (openwrt)
-        echo "echo '${name_should}' >/proc/sys/kernel/hostname"
-        ;;
-    (macosx)
-        echo "scutil --set HostName '${name_should}'"
-        ;;
-    (solaris)
-        echo "uname -S '${name_should}'"
-        ;;
-    (slackware|suse)
+            "&& hostnamectl set-hostname '$name_should'" \
+            "|| hostname '$name_should'"
+    ;;
+    centos|fedora|redhat|scientific|freebsd|netbsd|openbsd|gentoo|void)
+        echo "hostname '$name_should'"
+    ;;
+    macosx)
+        echo "scutil --set HostName '$name_should'"
+    ;;
+    solaris)
+        echo "uname -S '$name_should'"
+    ;;
+    slackware|suse|opensuse-leap)
         # We do not read from /etc/HOSTNAME, because the running
         # hostname is the first component only while the file contains
         # the FQDN.
-        echo "hostname '${name_should}'"
-        ;;
-    (*)
+        echo "hostname '$name_should'"
+    ;;
+    *)
         # Fall back to set the hostname using hostnamectl, if available.
-        if test -n "${has_hostnamectl}"
+        if test -n "$has_hostnamectl"
         then
             # Don't use hostnamectl as the primary means to set the hostname for
             # systemd systems, because it cannot be trusted to work reliably and
@@ -98,8 +94,7 @@ in
             echo "test \"\$(hostname)\" = \"\$(cat /etc/hostname)\"" \
                  " || hostname -F /etc/hostname"
         else
-            printf "echo 'Unsupported OS: %s' >&2\n" "${os}"
-            printf 'exit 1\n'
+            printf "echo 'Unsupported OS: %s' >&2\nexit 1\n" "$os"
         fi
-        ;;
+    ;;
 esac

cdist/conf/type/__hostname/manifest

@@ -20,49 +20,69 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
+not_supported() {
+    echo "Your operating system ($os) is currently not supported by this type (${__type##*/})." >&2
+    echo "Please contribute an implementation for it if you can." >&2
+    exit 1
+}
+
 set_hostname_systemd() {
     echo "$1" | __file /etc/hostname --source -
 }
 
-os=$(cat "${__global:?}/explorer/os")
+os=$(cat "$__global/explorer/os")
+os_version=$(cat "$__global/explorer/os_version")
+os_major=$(echo "$os_version" | grep -o '^[0-9][0-9]*' || true)
 
-max_len=$(cat "${__object:?}/explorer/max_len")
-has_hostnamectl=$(cat "${__object:?}/explorer/has_hostnamectl")
+max_len=$(cat "$__object/explorer/max_len")
+has_hostnamectl=$(cat "$__object/explorer/has_hostnamectl")
 
-if test -s "${__object:?}/parameter/name"
+if test -s "$__object/parameter/name"
 then
-    name_should=$(cat "${__object:?}/parameter/name")
+    name_should=$(cat "$__object/parameter/name")
 else
-    case ${os}
+    case $os
     in
         # RedHat-derivatives and BSDs
-        (centos|fedora|redhat|scientific|freebsd|netbsd|openbsd|slackware|suse)
+        centos|fedora|redhat|scientific|freebsd|netbsd|openbsd|slackware)
             # Hostname is FQDN
-            name_should=${__target_host:?}
-            ;;
+            name_should="${__target_host}"
+        ;;
+        suse|opensuse-leap)
+            # Classic SuSE stores the FQDN in /etc/HOSTNAME, while
+            # systemd does not. The running hostname is the first
+            # component in both cases.
+            # In versions before 15.x, the FQDN is stored in /etc/hostname.
+            if test -n "$has_hostnamectl" && test "$os_major" -ge 15 \
+                    && test "$os_major" -ne 42
+            then
+                name_should="${__target_host%%.*}"
+            else
+                name_should="${__target_host}"
+            fi
+        ;;
         *)
             # Hostname is only first component of FQDN on all other systems.
-            name_should=${__target_host:?}
-            name_should=${name_should%%.*}
-            ;;
+            name_should="${__target_host%%.*}"
+        ;;
     esac
 fi
 
-if test -n "${max_len}" && test "$(printf '%s' "${name_should}" | wc -c)" -gt "${max_len}"
+if test -n "$max_len" && test "$(printf '%s' "$name_should" | wc -c)" -gt "$max_len"
 then
     printf "Host name too long. Up to %u characters allowed.\n" "${max_len}" >&2
     exit 1
 fi
 
-case ${os}
+case $os
 in
-    (alpine|debian|devuan|ubuntu|void)
-        echo "${name_should}" | __file /etc/hostname --source -
-        ;;
-    (archlinux)
-        if test -n "${has_hostnamectl}"
+    alpine|debian|devuan|ubuntu|void)
+        echo "$name_should" | __file /etc/hostname --source -
+    ;;
+    archlinux)
+        if test -n "$has_hostnamectl"
         then
-            set_hostname_systemd "${name_should}"
+            set_hostname_systemd "$name_should"
         else
             echo 'Ancient ArchLinux variants without hostnamectl are not supported.' >&2
             exit 1
@@ -77,8 +97,8 @@ in
             #     --value "\"$name_should\""
         fi
         ;;
-    (centos|fedora|redhat|scientific)
-        if test -z "${has_hostnamectl}"
+    centos|fedora|redhat|scientific)
+        if test -z "$has_hostnamectl"
         then
             # Only write to /etc/sysconfig/network on non-systemd versions.
             # On systemd-based versions this entry is ignored.
@@ -86,83 +106,59 @@ in
                 --file /etc/sysconfig/network \
                 --delimiter '=' --exact_delimiter \
                 --key HOSTNAME \
-                --value "\"${name_should}\""
+                --value "\"$name_should\""
         else
-            set_hostname_systemd "${name_should}"
+            set_hostname_systemd "$name_should"
         fi
-        ;;
-    (gentoo)
+    ;;
+    gentoo)
         # Only write to /etc/conf.d/hostname on OpenRC-based installations.
         # On systemd use hostnamectl(1) in gencode-remote.
-        if test -z "${has_hostnamectl}"
+        if test -z "$has_hostnamectl"
         then
             __key_value '/etc/conf.d/hostname:hostname' \
                 --file /etc/conf.d/hostname \
                 --delimiter '=' --exact_delimiter \
                 --key 'hostname' \
-                --value "\"${name_should}\""
+                --value "\"$name_should\""
         else
             set_hostname_systemd "$name_should"
         fi
-        ;;
-    (freebsd)
+    ;;
+    freebsd)
         __key_value '/etc/rc.conf:hostname' \
             --file /etc/rc.conf \
             --delimiter '=' --exact_delimiter \
             --key 'hostname' \
-            --value "\"${name_should}\""
-        ;;
-    (macosx)
+            --value "\"$name_should\""
+    ;;
+    macosx)
         # handled in gencode-remote
-        ;;
-    (netbsd)
+        :
+    ;;
+    netbsd)
         __key_value '/etc/rc.conf:hostname' \
             --file /etc/rc.conf \
             --delimiter '=' --exact_delimiter \
             --key 'hostname' \
-            --value "\"${name_should}\""
+            --value "\"$name_should\""
 
         # To avoid confusion, ensure that the hostname is only stored once.
         __file /etc/myname --state absent
-        ;;
-    (openbsd)
-        echo "${name_should}" | __file /etc/myname --source -
-        ;;
-    (openwrt)
-        __uci system.@system[0].hostname --value "${name_should}"
-            # --transaction hostname
-        ;;
-    (slackware)
+    ;;
+    openbsd)
+        echo "$name_should" | __file /etc/myname --source -
+    ;;
+    slackware)
         # We write the FQDN into /etc/HOSTNAME.  But /etc/rc.d/rc.M will only
         # read the first component from this file and set it as the running
         # hostname on boot.
-        echo "${name_should}" | __file /etc/HOSTNAME --source -
-        ;;
-    (solaris)
-        echo "${name_should}" | __file /etc/nodename --source -
-        ;;
-    (suse)
-        if test -s "${__global:?}/explorer/os_release"
-        then
-            # shellcheck source=/dev/null
-            os_version=$(. "${__global:?}/explorer/os_release" && echo "${VERSION}")
-        else
-            os_version=$(sed -n 's/^VERSION\ *=\ *//p' "${__global:?}/explorer/os_version")
-        fi
-        os_major=$(expr "${os_version}" : '\([0-9]\{1,\}\)')
-
-        # Classic SuSE stores the FQDN in /etc/HOSTNAME, while
-        # systemd does not. The running hostname is the first
-        # component in both cases.
-        # In versions before 15.x, the FQDN is stored in /etc/hostname.
-        if test -n "${has_hostnamectl}" \
-                && test "${os_major}" -ge 15 \
-                && test "${os_major}" -ne 42
-        then
-            # strip away everything but the first part from $name_should
-            name_should=${name_should%%.*}
-        fi
-
+        echo "$name_should" | __file /etc/HOSTNAME --source -
+    ;;
+    solaris)
+        echo "$name_should" | __file /etc/nodename --source -
+    ;;
+    suse|opensuse-leap)
         # Modern SuSE provides /etc/HOSTNAME as a symlink for
         # backwards-compatibility. Unfortunately it cannot be used
         # here as __file does not follow the symlink.
@@ -171,25 +167,23 @@ in
         # not work correctly on openSUSE 12.x which provides
         # hostnamectl but not /etc/hostname.
 
-        if test -n "${has_hostnamectl}" -a "${os_major}" -gt 12
+        if test -n "$has_hostnamectl" -a "$os_major" -gt 12
         then
-            hostname_file=/etc/hostname
+            hostname_file='/etc/hostname'
         else
-            hostname_file=/etc/HOSTNAME
+            hostname_file='/etc/HOSTNAME'
         fi
 
-        echo "${name_should}" | __file "${hostname_file}" --source -
-        ;;
-    (*)
+        echo "$name_should" | __file "$hostname_file" --source -
+    ;;
+    *)
         # On other operating systems we fall back to systemd's
         # hostnamectl if available…
-        if test -n "${has_hostnamectl}"
+        if test -n "$has_hostnamectl"
         then
-            set_hostname_systemd "${name_should}"
+            set_hostname_systemd "$name_should"
         else
-            echo "Your operating system (${os}) is currently not supported by this type (${__type##*/})." >&2
-            echo "Please contribute an implementation for it if you can." >&2
-            exit 1
+            not_supported
         fi
-        ;;
+    ;;
 esac

cdist/conf/type/__hwclock/explorer/adjtime_mode

@@ -1,28 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Prints the clock mode read from the /etc/adjtime file, if present.
-#
-
-# not all operating systems use an adjfile
-test -f /etc/adjtime || exit 0
-
-# 3rd line is clock mode
-# adjtime(5) https://man7.org/linux/man-pages/man5/adjtime.5.html
-sed -n 3p /etc/adjtime

cdist/conf/type/__hwclock/explorer/timedatectl_localrtc

@@ -1,27 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Prints the LocalRTC property using timedatectl on systemd-based systems.
-#
-
-command -v timedatectl >/dev/null 2>&1 || exit 0
-
-# NOTE: Older versions of timedatectl do not support `timedatectl show'
-timedatectl --no-pager status \
-| awk -F': ' '$1 ~ "RTC in local TZ$" { sub(/[ \t]*$/, "", $2); print $2 }'

cdist/conf/type/__hwclock/gencode-remote

@@ -1,62 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera@ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-mode=$(cat "${__object:?}/parameter/mode")
-
-timedatectl_localrtc=$(cat "${__object:?}/explorer/timedatectl_localrtc")
-adjtime_mode=$(cat "${__object:?}/explorer/adjtime_mode")
-
-
-case ${mode}
-in
-	(localtime)
-		adjtime_str=LOCAL
-		local_rtc_str=yes
-		;;
-	(UTC|utc)
-		adjtime_str=UTC
-		local_rtc_str=no
-		;;
-	(*)
-		printf 'Invalid value for --mode: %s\n' "${mode}" >&2
-		printf 'Acceptable values are: localtime, utc.\n' >&2
-		exit 1
-esac
-
-
-if test -n "${timedatectl_localrtc}"
-then
-	# systemd
-	timedatectl_should=${local_rtc_str}
-	if test "${timedatectl_localrtc}" != "${timedatectl_should}"
-	then
-		printf 'timedatectl set-local-rtc %s\n' "${timedatectl_should}"
-	fi
-elif test -n "${adjtime_mode}"
-then
-	# others (update /etc/adjtime if present)
-	if test "${adjtime_mode}" != "${adjtime_str}"
-	then
-		# Update /etc/adjtime (3rd line is clock mode)
-		# adjtime(5) https://man7.org/linux/man-pages/man5/adjtime.5.html
-		# FIXME: Should maybe add third line if adjfile only contains two lines
-		printf "sed -i '3c\\\\\\n%s\\n' /etc/adjtime\\n" "${adjtime_str}"
-	fi
-fi

cdist/conf/type/__hwclock/man.rst

@@ -1,63 +0,0 @@
-cdist-type__hwclock(7)
-======================
-
-NAME
-----
-cdist-type__hwclock - Manage the hardware real time clock.
-
-
-DESCRIPTION
------------
-This type can be used to control how the hardware clock is used by the operating
-system.
-
-
-REQUIRED PARAMETERS
--------------------
-mode
-    What mode the hardware clock is in.
-
-    Acceptable values:
-
-    localtime
-        The hardware clock is set to local time (common for systems also running
-        Windows.)
-    UTC
-        The hardware clock is set to UTC (common on UNIX systems.)
-
-
-OPTIONAL PARAMETERS
--------------------
-None.
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Make the operating system treat the time read from the hwclock as UTC.
-    __hwclock --mode UTC
-
-
-SEE ALSO
---------
-:strong:`hwclock`\ (8)
-
-
-AUTHORS
--------
-Dennis Camera <dennis.camera@ssrq-sds-fds.ch>
-
-
-COPYING
--------
-Copyright \(C) 2020 Dennis Camera. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__hwclock/manifest

@@ -1,222 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera@ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# TODO: Consider supporting BADYEAR
-
-os=$(cat "${__global:?}/explorer/os")
-mode=$(cat "${__object:?}/parameter/mode")
-
-has_systemd_timedatectl=$(test -s "${__object:?}/explorer/timedatectl_localrtc" && echo true || echo false)
-
-
-case ${mode}
-in
-	(localtime)
-		local_clock=true
-		;;
-	(UTC|utc)
-		local_clock=false
-		;;
-	(*)
-		printf 'Invalid value for --mode: %s\n' "${mode}" >&2
-		printf 'Acceptable values are: UTC, localtime.\n' >&2
-		exit 1
-esac
-
-
-case ${os}
-in
-	(alpine|gentoo)
-		if ! $has_systemd_timedatectl
-		then
-			# NOTE: Gentoo also supports systemd, in which case /etc/conf.d is
-			#       not used. So we check for systemd presence here and only
-			#       update /etc/conf.d if systemd is not installed.
-			# https://wiki.gentoo.org/wiki/System_time#Hardware_clock
-
-			export CDIST_ORDER_DEPENDENCY=true
-			__file /etc/conf.d/hwclock --state present \
-				--owner root --group root --mode 0644
-			__key_value /etc/conf.d/hwclock:clock \
-				--file /etc/conf.d/hwclock \
-				--key clock \
-				--delimiter '=' --exact_delimiter \
-				--value "\"$($local_clock && echo local || echo UTC)\""
-			unset CDIST_ORDER_DEPENDENCY
-		fi
-		;;
-	(centos|fedora|redhat|scientific)
-		os_version=$(cat "${__global:?}/explorer/os_version")
-		os_major=$(expr "${os_version}" : '.* release \([0-9]*\)')
-		case ${os}
-		in
-			(centos|scientific)
-				update_sysconfig=$(test "${os_major}" -lt 6 && echo true || echo false)
-				;;
-			(fedora)
-				update_sysconfig=$(test "${os_major}" -lt 10 && echo true || echo false)
-				;;
-			(redhat|*)
-				case ${os_version}
-				in
-					('Red Hat Enterprise Linux'*)
-						update_sysconfig=$(test "${os_major}" -lt 6 && echo true || echo false)
-						;;
-					('Red Hat Linux'*)
-						update_sysconfig=true
-						;;
-					(*)
-						printf 'Could not determine Red Hat distribution.\n' >&2
-						printf "Please contribute an implementation for it if you can.\n" >&2
-						exit 1
-						;;
-				esac
-				;;
-		esac
-
-		if ${update_sysconfig:?}
-		then
-			export CDIST_ORDER_DEPENDENCY=true
-			__file /etc/sysconfig/clock --state present \
-				--owner root --group root --mode 0644
-			__key_value /etc/sysconfig/clock:UTC \
-				--file /etc/sysconfig/clock \
-				--key UTC \
-				--delimiter '=' --exact_delimiter \
-				--value "$($local_clock && echo false || echo true)"
-			unset CDIST_ORDER_DEPENDENCY
-		fi
-		;;
-	(debian|devuan|ubuntu)
-		os_major=$(sed 's/[^0-9].*$//' "${__global:?}/explorer/os_version")
-
-		case ${os}
-		in
-			(debian)
-				if test "${os_major}" -ge 7
-				then
-					update_rcS=false
-				elif test "${os_major}" -ge 3
-				then
-					update_rcS=true
-				else
-					# Debian 2.2 should be supportable using rcS.
-					# Debian 2.1 uses the ancient GMT key.
-					# Debian 1.3 does not have rcS.
-					printf "Your operating system (Debian %s) is currently not supported by this type (%s)\n" \
-						"$(cat "${__global:?}/explorer/os_version")" "${__type##*/}" >&2
-					printf "Please contribute an implementation for it if you can.\n" >&2
-					exit 1
-				fi
-				;;
-			(devuan)
-				update_rcS=false
-				;;
-			(ubuntu)
-				update_rcS=$(test "${os_major}" -lt 16 && echo true || echo false)
-				;;
-		esac
-
-		if ${update_rcS}
-		then
-			export CDIST_ORDER_DEPENDENCY=true
-			__file /etc/default/rcS --state present \
-				--owner root --group root --mode 0644
-			__key_value /etc/default/rcS:UTC \
-				--file /etc/default/rcS \
-				--key UTC \
-				--delimiter '=' --exact_delimiter \
-				--value "$($local_clock && echo no || echo yes)"
-			unset CDIST_ORDER_DEPENDENCY
-		fi		  
-		;;
-	(freebsd)
-		# cf. adjkerntz(8)
-		__file /etc/wall_cmos_clock \
-			--state "$($local_clock && echo present || echo absent)" \
-			--owner root --group wheel --mode 0444
-		;;
-	(netbsd)
-		# https://wiki.netbsd.org/guide/boot/#index9h2
-		__key_value /etc/rc.conf:rtclocaltime \
-			--file /etc/rc.conf \
-			--key rtclocaltime \
-			--delimiter '=' --exact_delimiter \
-			--value "$($local_clock && echo YES || echo NO)"
-		;;
-	(slackware)
-		__file /etc/hardwareclock --owner root --group root --mode 0644 \
-			--source - <<-EOF
-		# /etc/hardwareclock
-		#
-		# Tells how the hardware clock time is stored.
-		# This file is managed by cdist.
-
-		$($local_clock && echo localtime || echo UTC)
-		EOF
-		;;
-	(suse)
-		if test -s "${__global:?}/explorer/os_release"
-		then
-			# shellcheck source=/dev/null
-			os_version=$(. "${__global:?}/explorer/os_release" && echo "${VERSION}")
-		else
-			os_version=$(sed -n 's/^VERSION\ *=\ *//p' "${__global:?}/explorer/os_version")
-		fi
-		os_major=$(expr "${os_version}" : '\([0-9]\{1,\}\)')
-
-		# TODO: Consider using `yast2 timezone set hwclock' instead
-		if expr "${os_major}" \< 12
-		then
-			# Starting with SuSE 12 (first systemd-based version)
-			# /etc/sysconfig/clock does not contain the HWCLOCK line
-			# anymore.
-			# With SuSE 13, it has been reduced to TIMEZONE configuration.
-			__key_value /etc/sysconfig/clock:HWCLOCK \
-				--file /etc/sysconfig/clock \
-				--delimiter '=' --exact_delimiter \
-				--key HWCLOCK \
-				--value "$($local_clock && echo '"--localtime"' || echo '"-u"')"
-		fi
-		;;
-	(void)
-		export CDIST_ORDER_DEPENDENCY=true
-		__file /etc/rc.conf \
-			--owner root --group root --mode 0644 \
-			--state present
-		__key_value /etc/rc.conf:HARDWARECLOCK \
-			--file /etc/rc.conf \
-			--delimiter '=' --exact_delimiter \
-			--key HARDWARECLOCK \
-			--value "\"$($local_clock && echo localtime || echo UTC)\""
-		unset CDIST_ORDER_DEPENDENCY
-		;;
-	(*)
-		if ! $has_systemd_timedatectl
-		then
-			printf "Your operating system (%s) is currently not supported by this type (%s)\n" "$os" "${__type##*/}" >&2
-			printf "Please contribute an implementation for it if you can.\n" >&2
-			exit 1
-		fi
-		;;
-esac
-
-# NOTE: timedatectl set-local-rtc for systemd is in gencode-remote
-# NOTE: /etc/adjtime is also updated in gencode-remote

cdist/conf/type/__hwclock/parameter/required

@@ -1 +0,0 @@
-mode

cdist/conf/type/__iptables_apply/files/init-script

@@ -1,4 +1,7 @@
 #!/bin/sh
+# Nico Schottelius
+# Zürisee, Mon Sep  2 18:38:27 CEST 2013
+#
 ### BEGIN INIT INFO
 # Provides:          iptables
 # Required-Start:    $local_fs $remote_fs
@@ -11,72 +14,34 @@
 #                    and saves/restores previous status
 ### END INIT INFO
 
-# Originally written by:
-#   Nico Schottelius
-#   Zürisee, Mon Sep  2 18:38:27 CEST 2013
-#
-# 2013 Nico Schottelius (nico-cdist at schottelius.org)
-# 2020 Matthias Stecher (matthiasstecher at gmx.de)
-#
-# This file is distributed with cdist and licenced under the
-# GNU GPLv3+ WITHOUT ANY WARRANTY.
-
-
-# Read files and execute the content with the given commands
-#
-# Arguments:
-#  1:    Directory
-#  2..n: Commands which should be used to execute the file content
-gothrough() {
-    cd "$1" || return
-    shift
-
-    # iterate through all rules and continue if it's not a file
-    for rule in *; do
-        [ -f "$rule" ] || continue
-        echo "Appling iptables rule $rule ..."
-
-        # execute it with all commands specificed
-        ruleparam="$(cat "$rule")"
-        for cmd in "$@"; do
-            # Command and Rule should be split.
-            # shellcheck disable=SC2046
-            command $cmd $ruleparam
-        done
-    done
-}
-
-# Shortcut for iptables command to do IPv4 and v6
-# only applies to the "reset" target
-iptables() {
-    command iptables "$@"
-    command ip6tables "$@"
-}
 
 basedir=/etc/iptables.d
-status4="${basedir}/.pre-start"
-status6="${basedir}/.pre-start6"
+status="${basedir}/.pre-start"
 
 case $1 in
     start)
         # Save status
-        iptables-save > "$status4"
-        ip6tables-save > "$status6"
+        iptables-save > "$status"
 
         # Apply our ruleset
-        gothrough "$basedir"     iptables
-        #gothrough "$basedir/v4"  iptables  # conflicts with $basedir
-        gothrough "$basedir/v6"  ip6tables
-        gothrough "$basedir/all" iptables  ip6tables
+        cd "$basedir" || exit
+        count="$(find . ! -name . -prune | wc -l)"
+
+        # Only do something if there are rules
+        if [ "$count" -ge 1 ]; then
+            for rule in *; do
+                echo "Applying iptables rule $rule ..."
+                # Rule should be split.
+                # shellcheck disable=SC2046
+                iptables $(cat "$rule")
+            done
+        fi
     ;;
 
     stop)
         # Restore from status before, if there is something to restore
-        if [ -f "$status4" ]; then
-            iptables-restore < "$status4"
-        fi
-        if [ -f "$status6" ]; then
-            ip6tables-restore < "$status6"
+        if [ -f "$status" ]; then
+            iptables-restore < "$status"
         fi
     ;;
     restart)

cdist/conf/type/__iptables_apply/man.rst

@@ -10,24 +10,7 @@ DESCRIPTION
 -----------
 This cdist type deploys an init script that triggers
 the configured rules and also re-applies them on
-configuration. Rules are written from __iptables_rule
-into the folder ``/etc/iptables.d/``.
-
-It reads all rules from the base folder as rules for IPv4.
-Rules in the subfolder ``v6/`` are IPv6 rules. Rules in
-the subfolder ``all/`` are applied to both rule tables. All
-files contain the arguments for a single ``iptables`` and/or
-``ip6tables`` command.
-
-Rules are applied in the following order:
-1. All IPv4 rules
-2. All IPv6 rules
-2. All rules that should be applied to both tables
-
-The order of the rules that will be applied are definite
-from the result the shell glob returns, which should be
-alphabetical. If rules must be applied in a special order,
-prefix them with a number like ``02-some-rule``.
+configuration.
 
 
 REQUIRED PARAMETERS
@@ -41,7 +24,7 @@ None
 EXAMPLES
 --------
 
-None (__iptables_apply is used by __iptables_rule automatically)
+None (__iptables_apply is used by __iptables_rule)
 
 
 SEE ALSO
@@ -52,13 +35,11 @@ SEE ALSO
 AUTHORS
 -------
 Nico Schottelius <nico-cdist--@--schottelius.org>
-Matthias Stecher <matthiasstecher--@--gmx.de>
 
 
 COPYING
 -------
-Copyright \(C) 2013 Nico Schottelius.
-Copyright \(C) 2020 Matthias Stecher.
-You can redistribute it and/or modify it under the terms of the GNU
-General Public License as published by the Free Software Foundation,
-either version 3 of the License, or (at your option) any later version.
+Copyright \(C) 2013 Nico Schottelius. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__iptables_rule/man.rst

@@ -11,10 +11,6 @@ DESCRIPTION
 This cdist type allows you to manage iptable rules
 in a distribution independent manner.
 
-See :strong:`cdist-type__iptables_apply`\ (7) for the
-execution order of these rules. It will be executed
-automaticly to apply all rules non-volaite.
-
 
 REQUIRED PARAMETERS
 -------------------
@@ -29,24 +25,6 @@ state
    'present' or 'absent', defaults to 'present'
 
 
-BOOLEAN PARAMETERS
-------------------
-All rules without any of these parameters will be treated like ``--v4`` because
-of backward compatibility.
-
-v4
-    Explicitly set it as rule for IPv4. If IPv6 is set, too, it will be
-    threaten like ``--all``. Will be the default if nothing else is set.
-
-v6
-    Explicitly set it as rule for IPv6. If IPv4 is set, too, it will be
-    threaten like ``--all``.
-
-all
-    Set the rule for both IPv4 and IPv6. It will be saved separately from the
-    other rules.
-
-
 EXAMPLES
 --------
 
@@ -70,16 +48,6 @@ EXAMPLES
         --state absent
 
 
-    # IPv4-only rule for ICMPv4
-    __iptables_rule icmp-v4 --v4 --rule "-A INPUT -p icmp -j ACCEPT"
-    # IPv6-only rule for ICMPv6
-    __iptables_rule icmp-v6 --v6 --rule "-A INPUT -p icmpv6 -j ACCEPT"
-
-    # doing something for the dual stack
-    __iptables_rule fwd-eth0-eth1 --v4 --v6 --rule "-A INPUT -i eth0 -o eth1 -j ACCEPT"
-    __iptables_rule fwd-eth1-eth0 --all --rule "-A -o eth1 -i eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT"
-
-
 SEE ALSO
 --------
 :strong:`cdist-type__iptables_apply`\ (7), :strong:`iptables`\ (8)
@@ -88,13 +56,11 @@ SEE ALSO
 AUTHORS
 -------
 Nico Schottelius <nico-cdist--@--schottelius.org>
-Matthias Stecher <matthiasstecher--@--gmx.de>
 
 
 COPYING
 -------
-Copyright \(C) 2013 Nico Schottelius.
-Copyright \(C) 2020 Matthias Stecher.
-You can redistribute it and/or modify it under the terms of the GNU
-General Public License as published by the Free Software Foundation,
-either version 3 of the License, or (at your option) any later version.
+Copyright \(C) 2013 Nico Schottelius. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__iptables_rule/manifest

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 #
 # 2013 Nico Schottelius (nico-cdist at schottelius.org)
-# 2020 Matthias Stecher (matthiasstecher at gmx.de)
 #
 # This file is part of cdist.
 #
@@ -25,36 +24,12 @@ base_dir=/etc/iptables.d
 name="$__object_id"
 state="$(cat "$__object/parameter/state")"
 
-if [ -f "$__object/parameter/v4" ]; then
-    only_v4="yes"
-    # $specific_dir is $base_dir
-fi
-if [ -f "$__object/parameter/v6" ]; then
-    only_v6="yes"
-    specific_dir="$base_dir/v6"
-fi
-# If rules should be set for both protocols
-if { [ "$only_v4" = "yes" ] && [ "$only_v6" = "yes" ]; } ||
-    [ -f "$__object/parameter/all" ]; then
-
-    # all to a specific directory
-    specific_dir="$base_dir/all"
-fi
-
-# set rule directory based on if it's the base or subdirectory
-rule_dir="${specific_dir:-$base_dir}"
-
 ################################################################################
 # Basic setup
 #
 
 __directory "$base_dir" --state present
 
-# sub-directory if required
-if [ "$specific_dir" ]; then
-    require="__directory/$base_dir" __directory "$specific_dir" --state present
-fi
-
 # Have apply do the real job
 require="$__object_name" __iptables_apply
 
@@ -62,15 +37,6 @@ require="$__object_name" __iptables_apply
 # The rule
 #
 
-for dir in "$base_dir" "$base_dir/v6" "$base_dir/all"; do
-    # defaults to absent except the directory that should contain the file
-    if [ "$rule_dir" = "$dir" ]; then
-        curr_state="$state"
-    else
-        curr_state="absent"
-    fi
-
-    require="__directory/$rule_dir" __file "$dir/$name" \
-        --source "$__object/parameter/rule" \
-        --state "$curr_state"
-done
+require="__directory/$base_dir" __file "$base_dir/${name}" \
+    --source "$__object/parameter/rule" \
+    --state "$state"

cdist/conf/type/__iptables_rule/parameter/boolean

@@ -1,3 +0,0 @@
-all
-v4
-v6

cdist/conf/type/__line/explorer/state

@@ -53,10 +53,8 @@ function _find(_text, _pattern) {
 BEGIN {
    getline anchor < (ENVIRON["__object"] "/parameter/" position)
    getline pattern < (ENVIRON["__object"] "/parameter/" needle)
-   getline line < (ENVIRON["__object"] "/parameter/line")
 
    found_line = 0
-   correct_line = 0
    correct_pos = (position != "after" && position != "before")
 }
 {
@@ -65,18 +63,15 @@ BEGIN {
          getline
          if (_find($0, pattern)) {
             found_line++
-	    if (index($0, line) == 1) { correct_line++ }
             correct_pos = 1
             exit 0
          }
       } else if (_find($0, pattern)) {
          found_line++
-         if (index($0, line) == 1) { correct_line++ }
       }
    } else if (position == "before") {
       if (_find($0, pattern)) {
          found_line++
-         if (index($0, line) == 1) { correct_line++ }
          getline
          if (match($0, anchor)) {
             correct_pos = 1
@@ -86,18 +81,13 @@ BEGIN {
    } else {
       if (_find($0, pattern)) {
          found_line++
-         if (index($0, line) == 1) { correct_line++ }
          exit 0
       }
    }
 }
 END {
    if (found_line && correct_pos) {
-      if (correct_line) {
-        print "present"
-      } else {
-        print "matching"
-      }
+      print "present"
    } else if (found_line) {
       print "wrongposition"
    } else {

cdist/conf/type/__line/gencode-remote

@@ -38,11 +38,7 @@ if [ -z "$state_is" ]; then
    exit 1
 fi
 
-if [ "$state_should" = "$state_is" ] || \
-	{ [ "$state_should" = "present" ] && [ "$state_is" = "matching" ] ;} || \
-	{ [ "$state_should" = "replace" ] && [ "$state_is" = "present" ] ;} ; then
-   # If state matches already, or 'present' is used and regex matches
-   # or 'replace' is used and the exact line is present, then there is
+if [ "$state_should" = "$state_is" ]; then
    # nothing to do
    exit 0
 fi
@@ -65,8 +61,8 @@ fi
 add=0
 remove=0
 case "$state_should" in
-   present|replace)
-      if [ "$state_is" = "wrongposition" ] || [ "$state_is" = "matching" ]; then
+   present)
+      if [ "$state_is" = "wrongposition" ]; then
          echo updated >> "$__messages_out"
          remove=1
       else

cdist/conf/type/__line/man.rst

@@ -31,7 +31,7 @@ file
 line
     Specifies the line which should be absent or present.
 
-    Must be present, if state is 'present' or 'replace'.
+    Must be present, if state is 'present'.
     Ignored if regex is given and state is 'absent'.
 
 regex
@@ -41,13 +41,10 @@ regex
     If state is 'absent', ensure all lines matching the regular expression
     are absent.
 
-    If state is 'replace', ensure all lines matching the regular expression
-    are exactly 'line'.
-
     The regular expression is interpreted by awk's match function.
 
 state
-    'present', 'absent' or 'replace', defaults to 'present'.
+    'present' or 'absent', defaults to 'present'
 
 onchange
     The code to run if line is added, removed or updated.
@@ -102,12 +99,6 @@ EXAMPLES
         --line '-session required pam_exec.so debug log=/tmp/classify.log /usr/local/libexec/classify' \
         --after '^session[[:space:]]+include[[:space:]]+password-auth-ac$'
 
-    # Uncomment as needed and set a value in a configuration file.
-    __line /etc/example.conf \
-        --line 'SomeSetting SomeValue' \
-        --regex '^(#[[:space:]]*)?SomeSetting[[:space:]]' \
-        --state replace
-
 
 SEE ALSO
 --------

cdist/conf/type/__locale/deprecated

@@ -1 +0,0 @@
-This type is deprecated. Please use __localedef instead.

cdist/conf/type/__locale/gencode-remote

@@ -23,15 +23,6 @@
 
 locale="$__object_id"
 
-state_is=$(cat "$__object/explorer/state")
-state_should=$(cat "$__object/parameter/state")
-
-# short circuit if there is nothing to do
-if [ "$state_is" = "$state_should" ]; then
-    exit 0
-fi
-
-
 # Hardcoded, create a pull request with
 # branching on $os in case it is at another location
 alias=/usr/share/locale/locale.alias
@@ -44,6 +35,8 @@ charmap=$(echo "$locale" | cut -d . -f 2)
 # W-T-F!
 locale_remove=$(echo "$locale" | sed 's/UTF-8/utf8/')
 
+state=$(cat "$__object/parameter/state")
+
 os=$(cat "$__global/explorer/os")
 
 # Nothing to be done on alpine
@@ -53,7 +46,7 @@ case "$os" in
         ;;
 esac
 
-case "$state_should" in
+case "$state" in
     present)
         echo localedef -A "$alias" -f "$charmap" -i "$input" "$locale"
     ;;
@@ -61,7 +54,7 @@ case "$state_should" in
         echo localedef --delete-from-archive "$locale_remove"
     ;;
     *)
-        echo "Unsupported state: $state_should" >&2
+        echo "Unsupported state: $state" >&2
         exit 1
     ;;
 esac

cdist/conf/type/__localedef/explorer/state

@@ -1,100 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# This explorer determines if the locale is defined on the target system.
-# Will print nothing on error.
-#
-# Possible output:
-#  present:
-#    the main locale (and possibly aliases) is present
-#  absent:
-#    neither the main locale nor any aliases are present
-#  alias-present:
-#    the main locale is absent, but at least one of its aliases is present
-#
-
-# Hardcoded, create a pull request in case it is at another location for
-# some other distro. (cf. gencode-remote)
-aliasfile='/usr/share/locale/locale.alias'
-
-command -v locale >/dev/null 2>&1 || exit 0
-
-locales=$(locale -a)
-
-parse_locale() {
-	# This function will split locales into their parts. Locale strings are
-	# usually of the form: [language[_territory][.codeset][@modifier]]
-	# For simplicity, language and territory are not separated by this function.
-	# Old Linux systems were also using "english" or "german" as locale strings.
-	# Usage: parse_locale locale_str lang_var codeset_var modifier_var
-	eval "${2:?}"="$(expr "$1" : '\([^.@]*\)')"
-	eval "${3:?}"="$(expr "$1" : '[^.]*\.\([^@]*\)')"
-	eval "${4:?}"="$(expr "$1" : '.*@\(.*\)$')"
-}
-
-format_locale() {
-	# Usage: format_locale language codeset modifier
-	printf '%s' "$1"
-	test -z "$2" || printf '.%s' "$2"
-	test -z "$3" || printf '@%s' "$3"
-	printf '\n'
-}
-
-gnu_normalize_codeset() {
-	# reimplementation of glibc/locale/programs/localedef.c normalize_codeset()
-	echo "$*" | tr '[:upper:]' '[:lower:]' | tr -cd '[:alnum:]'
-}
-
-locale_available() (
-	echo "${locales}" | grep -qxF "$1" || {
-		# glibc uses "normalized" locale names in archives.
-		# If a locale is stored in an archive, the normalized name will be
-		# printed by locale, so that needs to be checked, too.
-		localename=$(
-			parse_locale "$1" _lang _codeset _modifier \
-			&& format_locale "${_lang:?}" "$(gnu_normalize_codeset "${_codeset?}")" \
-			   "${_modifier?}")
-		echo "${locales}" | grep -qxF "${localename}"
-	}
-)
-
-if locale_available "${__object_id:?}"
-then
-	echo present
-else
-	# NOTE: locale.alias can be symlinked.
-	if test -e "${aliasfile}"
-	then
-		# Check if one of the aliases of the locale is defined
-		baselocale=$(
-			parse_locale "${__object_id:?}" _lang _codeset _modifiers \
-			&& format_locale "${_lang}" "${_codeset}")
-		while read -r _alias _localename
-		do
-			if test "${_localename}" = "${baselocale}" \
-				&& echo "${locales}" | grep -qxF "${_alias}"
-			then
-				echo alias-present
-				exit 0
-			fi
-		done <"${aliasfile}"
-	fi
-
-	echo absent
-fi

cdist/conf/type/__localedef/files/lib/glibc.sh

@@ -1,5 +0,0 @@
-# -*- mode: sh; indent-tabs-mode: t -*-
-
-gnu_normalize_codeset() {
-	echo "$*" | tr -cd '[:alnum:]' | tr '[:upper:]' '[:lower:]'
-}

cdist/conf/type/__localedef/files/lib/locale.sh

@@ -1,20 +0,0 @@
-# -*- mode: sh; indent-tabs-mode:t -*-
-
-parse_locale() {
-	# This function will split locales into their parts. Locale strings are
-	# usually of the form: [language[_territory][.codeset][@modifier]]
-	# For simplicity, language and territory are not separated by this function.
-	# Old Linux systems were also using "english" or "german" as locale strings.
-	# Usage: parse_locale locale_str lang_var codeset_var modifier_var
-	eval "${2:?}"="$(expr "$1" : '\([^.@]*\)')"
-	eval "${3:?}"="$(expr "$1" : '[^.]*\.\([^@]*\)')"
-	eval "${4:?}"="$(expr "$1" : '.*@\(.*\)$')"
-}
-
-format_locale() {
-	# Usage: format_locale language codeset modifier
-	printf '%s' "$1"
-	test -z "$2" || printf '.%s' "$2"
-	test -z "$3" || printf '@%s' "$3"
-	printf '\n'
-}

cdist/conf/type/__localedef/gencode-remote

@@ -1,136 +0,0 @@
-#!/bin/sh -e
-#
-# 2013-2019 Nico Schottelius (nico-cdist at schottelius.org)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Manage system locales using localedef(1).
-#
-
-# shellcheck source=cdist/conf/type/__localedef/files/lib/locale.sh
-. "${__type:?}/files/lib/locale.sh"
-# shellcheck source=cdist/conf/type/__localedef/files/lib/glibc.sh
-. "${__type:?}/files/lib/glibc.sh"
-
-state_is=$(cat "${__object:?}/explorer/state")
-state_should=$(cat "${__object:?}/parameter/state")
-
-test "${state_should}" = 'present' -o "${state_should}" = 'absent' || {
-	printf 'Invalid state: %s\n' "${state_should}" >&2
-	exit 1
-}
-
-# NOTE: If state explorer fails (e.g. locale(1) missing), the following check
-#       will always fail and let definition/removal run.
-if test "${state_is}" = "${state_should}"
-then
-	exit 0
-fi
-
-locale=${__object_id:?}
-os=$(cat "${__global:?}/explorer/os")
-
-if expr "${locale}" : '.*/' >/dev/null
-then
-	printf 'Paths as locales are not supported.\n' >&2
-	printf '__object_id is: %s\n' "${locale}" >&2
-	exit 1
-fi
-
-: "${lang=}" "${codeset=}" "${modifier=}"  # declare variables for shellcheck
-parse_locale "${locale}" lang codeset modifier
-
-
-case ${os}
-in
-	(alpine|openwrt)
-		printf '%s does not support locales.\n' "${os}" >&2
-		exit 1
-		;;
-	(archlinux|debian|devuan|ubuntu|suse|centos|fedora|redhat|scientific)
-		# FIXME: The code below only works for glibc-based installations.
-
-		# NOTE: Hardcoded, create a pull request in case it is at another
-		#       location for some opther distro.
-		# NOTE: locale.alias can be symlinked (e.g. Debian)
-		aliasfile='/usr/share/locale/locale.alias'
-
-		case ${state_should}
-		in
-			(present)
-				input=$(format_locale "${lang}" '' "${modifier}")
-				cat <<-EOF
-				set --
-				if test -e '${aliasfile}'
-				then
-					set -- -A '${aliasfile}'
-				fi
-
-				localedef -i '${input}' -f '${codeset}' "\$@" '${locale}'
-				EOF
-				;;
-			(absent)
-				main_localename=$(format_locale "${lang}" "$(gnu_normalize_codeset "${codeset}")" "${modifier}")
-
-				cat <<-EOF
-				while read -r _alias _localename
-				do
-				    if test "\${_localename}" = '$(format_locale "${lang}" "${codeset}")'
-				    then
-				        localedef --delete-from-archive "\${_alias}"
-				    fi
-				done <'${aliasfile}'
-				EOF
-
-				if test "${state_is}" = present
-				then
-					printf "localedef --delete-from-archive '%s'\n" "${main_localename}"
-				fi
-				;;
-		esac
-		;;
-	(freebsd)
-		case ${state_should}
-		in
-			(present)
-				if expr "$(grep -oe '^[0-9]*' "${__global:?}/explorer/os_version")" '>=' 11 >/dev/null
-				then
-					# localedef(1) is available with FreeBSD >= 11
-					printf "localedef -i '%s' -f '%s' '%s'\n" "${input}" "${codeset}" "${locale}"
-				else
-					printf 'localedef(1) was added to FreeBSD starting with version 11.\n' >&2
-					printf 'Please upgrade your FreeBSD installation to use %s.\n' "${__type##*/}" >&2
-					exit 1
-				fi
-				;;
-			(absent)
-				printf "rm -R '/usr/share/locale/%s'\n" "${locale}"
-				;;
-		esac
-		;;
-	(netbsd|openbsd)
-		# NetBSD/OpenBSD are missing localedef(1).
-		# We also do not delete defined locales because they can't be recreated.
-		echo "${os} is lacking localedef(1). Locale management unavailable." >&2
-		exit 1
-		;;
-	(*)
-		echo "Your operating system (${os}) is currently not supported by this type (${__type##*/})." >&2
-		echo "Please contribute an implementation for it if you can." >&2
-		exit 1
-		;;
-esac

cdist/conf/type/__localedef/man.rst

@@ -1,60 +0,0 @@
-cdist-type__localedef(7)
-========================
-
-NAME
-----
-cdist-type__localedef - Define and remove system locales
-
-
-DESCRIPTION
------------
-This cdist type allows you to define locales on the system using
-:strong:`localedef`\ (1) or remove them.
-On systems that don't support definition of new locales, the type will raise an
-error.
-
-**NB:** This type respects the glibc ``locale.alias`` file,
-i.e. it defines alias locales or deletes aliases of a locale when it is removed.
-It is not possible, however, to use alias names to define locales or only remove
-certain aliases of a locale.
-
-
-OPTIONAL PARAMETERS
--------------------
-state
-   ``present`` or ``absent``. Defaults to ``present``.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Add locale de_CH.UTF-8
-    __localedef de_CH.UTF-8
-
-    # Same as above, but more explicit
-    __localedef de_CH.UTF-8 --state present
-
-    # Remove colourful British English
-    __localedef en_GB.UTF-8 --state absent
-
-
-SEE ALSO
---------
-:strong:`locale`\ (1),
-:strong:`localedef`\ (1),
-:strong:`cdist-type__locale_system`\ (7)
-
-
-AUTHORS
--------
-| Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
-| Nico Schottelius <nico-cdist--@--schottelius.org>
-
-
-COPYING
--------
-Copyright \(C) 2013-2019 Nico Schottelius, 2020 Dennis Camera. Free use of this
-software is granted under the terms of the GNU General Public License version 3
-or later (GPLv3+).

cdist/conf/type/__localedef/manifest

@@ -1,30 +0,0 @@
-#!/bin/sh -e
-#
-# 2013-2019 Nico Schottelius (nico-cdist at schottelius.org)
-# 2015 David Hürlimann (david at ungleich.ch)
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Install required packages.
-#
-
-case $(cat "${__global:?}/explorer/os")
-in
-	(debian|devuan)
-		__package_apt locales --state present
-		;;
-esac

cdist/conf/type/__localedef/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__localedef/parameter/optional

@@ -1 +0,0 @@
-state

cdist/conf/type/__package_apt/gencode-remote

@@ -42,13 +42,6 @@ else
    target_release=""
 fi
 
-if [ -f "$__object/parameter/install-recommends" ]; then
-    # required if __apt_norecommends is used
-    recommendsparam="-o APT::Install-Recommends=1"
-else
-    recommendsparam="-o APT::Install-Recommends=0"
-fi
-
 if [ -f "$__object/parameter/purge-if-absent" ]; then
 	purgeparam="--purge"
 else
@@ -69,16 +62,16 @@ case "$state_is" in
     ;;
 esac
 
+# Hint if we need to avoid questions at some point:
+# DEBIAN_PRIORITY=critical can reduce the number of questions
+aptget="DEBIAN_FRONTEND=noninteractive apt-get --quiet --yes -o APT::Install-Recommends=0 -o Dpkg::Options::=\"--force-confdef\" -o Dpkg::Options::=\"--force-confold\""
+
 if [ "$state_is" = "$state_should" ]; then
     if [ -z "$version" ] || [ "$version" = "$version_is" ]; then
         exit 0;
     fi
 fi
 
-# Hint if we need to avoid questions at some point:
-# DEBIAN_PRIORITY=critical can reduce the number of questions
-aptget="DEBIAN_FRONTEND=noninteractive apt-get --quiet --yes -o Dpkg::Options::=\"--force-confdef\" -o Dpkg::Options::=\"--force-confold\""
-
 case "$state_should" in
     present)
         # following is bit ugly, but important hack.
@@ -92,7 +85,7 @@ EOF
         if [ -n "$version" ]; then
             name="${name}=${version}"
         fi
-        echo "$aptget $recommendsparam install $target_release '$name'"
+        echo "$aptget install $target_release '$name'"
         echo "installed" >> "$__messages_out"
     ;;
     absent)

cdist/conf/type/__package_apt/man.rst

@@ -9,9 +9,7 @@ cdist-type__package_apt - Manage packages with apt-get
 DESCRIPTION
 -----------
 apt-get is usually used on Debian and variants (like Ubuntu) to
-manage packages. The package will be installed without recommended
-or suggested packages. If such packages are required, install them
-separatly or use the parameter ``--install-recommends``.
+manage packages.
 
 This type will also update package index, if it is older
 than one day, to avoid missing package error messages.
@@ -25,7 +23,7 @@ None
 OPTIONAL PARAMETERS
 -------------------
 name
-    If supplied, use the name and not the object id as the package name.
+   If supplied, use the name and not the object id as the package name.
 
 state
     Either "present" or "absent", defaults to "present"
@@ -41,15 +39,6 @@ version
 
 BOOLEAN PARAMETERS
 ------------------
-install-recommends
-    If the package will be installed, it also installs recommended packages
-    with it. It will not install recommended packages if the original package
-    is already installed.
-
-    In most cases, it is recommended to install recommended packages separatly
-    to control which additional packages will be installed to avoid useless
-    installed packages.
-
 purge-if-absent
     If this parameter is given when state is `absent`, the package is
     purged from the system (using `--purge`).

cdist/conf/type/__package_apt/parameter/boolean

@@ -1,2 +1 @@
-install-recommends
 purge-if-absent

cdist/conf/type/__package_pip/explorer/pip

@@ -1,10 +0,0 @@
-#!/bin/sh -e
-
-for bin in pip3 pip
-do
-    if check="$( command -v "$bin" )"
-    then
-        echo "$check"
-        break
-    fi
-done

cdist/conf/type/__package_pip/explorer/state

@@ -32,7 +32,7 @@ pipparam="$__object/parameter/pip"
 if [ -f "$pipparam" ]; then
     pip=$(cat "$pipparam")
 else
-    pip="$( "$__type_explorer/pip" )"
+    pip="pip"
 fi
 
 # If there is no pip, it may get created from somebody else.

cdist/conf/type/__package_pip/gencode-remote

@@ -38,12 +38,7 @@ pipparam="$__object/parameter/pip"
 if [ -f "$pipparam" ]; then
     pip=$(cat "$pipparam")
 else
-    pip="$( cat "$__object/explorer/pip" )"
-    if [ -z "$pip" ]
-    then
-        echo 'pip not found in path' >&2
-        exit 1
-    fi
+    pip="pip"
 fi
 
 runasparam="$__object/parameter/runas"
@@ -60,7 +55,7 @@ case "$state_should" in
         then
             echo "su -c '$pip install -q $name' $runas"
         else
-            echo "$pip" install -q "$name"
+            echo $pip install -q "$name"
         fi
         echo "installed" >> "$__messages_out"
     ;;
@@ -69,7 +64,7 @@ case "$state_should" in
         then
             echo "su -c '$pip uninstall -q -y $name' $runas"
         else
-            echo "$pip" uninstall -q -y "$name"
+            echo $pip uninstall -q -y "$name"
         fi
         echo "removed" >> "$__messages_out"
     ;;

cdist/conf/type/__package_pkgng_freebsd/explorer/pkg_bootstrapped

@@ -1,4 +0,0 @@
-#!/bin/sh -e
-if pkg -N >/dev/null 2>&1; then
-	echo "YES"
-fi

cdist/conf/type/__package_pkgng_freebsd/explorer/pkg_version

@@ -18,14 +18,9 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 #
-# Retrieve the status of a package - parsed pkgng output
+# Retrieve the status of a package - parsed dpkg output
 #
 
-if ! pkg -N >/dev/null 2>&1; then
-   # Nothing to do if pkg is not bootstrapped
-   exit
-fi
-
 if [ -f "$__object/parameter/name" ]; then
    name="$(cat "$__object/parameter/name")"
 else

cdist/conf/type/__package_pkgng_freebsd/gencode-remote

@@ -43,7 +43,6 @@ fi
 repo="$(cat "$__object/parameter/repo")"
 state="$(cat "$__object/parameter/state")"
 curr_version="$(cat "$__object/explorer/pkg_version")"
-pkg_bootstrapped="$(cat "$__object/explorer/pkg_bootstrapped")"
 add_cmd="pkg install -y"
 rm_cmd="pkg delete -y"
 upg_cmd="pkg upgrade -y"
@@ -74,10 +73,6 @@ execcmd(){
          ;;
    esac
 
-   if [ -z "${pkg_bootstrapped}" ]; then
-       echo "ASSUME_ALWAYS_YES=yes pkg bootstrap >/dev/null 2>&1"
-   fi
-
    echo "$_cmd >/dev/null 2>&1"   # Silence the output of the command
    echo "status=\$?"
    echo "if [ \"\$status\" -ne \"0\" ]; then"

cdist/conf/type/__service/manifest

@@ -7,9 +7,7 @@ action="$(cat "$__object/parameter/action")"
 
 case "$manager" in
 	systemd)
-		test "$action" = "start" && action="running"
-		test "$action" = "stop"  && action="stopped"
-		__systemd_service "$name" --state "$action"
+		__systemd_service "$name" --action "$action"
 	;;
 	*)
 		# Unknown: handled by `service $NAME $action` in gencode-remote.

cdist/conf/type/__sshd_config/explorer/state

@@ -1,121 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Determines the current state of the config option.
-# Possible output:
-#  - present: "should" option present in config file
-#  - default: the "should" option is the default -> don’t know if present
-#  - absent: no such option present in config file
-#
-
-joinlines() { sed -n -e H -e "\${x;s/^\\n//;s/\\n/${1:?}/g;p;}"; }
-trlower() { tr '[:upper:]' '[:lower:]'; }
-tolower() { printf '%s' "$*" | trlower; }
-
-default_value() {
-	sshd -T -f /dev/null -C "$(make_conn_spec)" \
-	| sed -n -e 's/^'"$(tolower "${1:?}")"'[[:blank:]]\{1,\}//p'
-}
-
-make_conn_spec() {
-	if test -s "${__object:?}/parameter/match"
-	then
-		_match_file="${__object:?}/parameter/match"
-	else
-		_match_file='/dev/null'
-	fi
-
-	for _kw in \
-		addr=Address \
-		user=User \
-		host=Host \
-		laddr=LocalAddress \
-		lport=LocalPort \
-		rdomain=RDomain
-	do
-		_specname=${_kw%%=*}
-		_confname=$(tolower "${_kw#*=}")
-		while read -r _k _v
-		do
-			if test "$(tolower "${_k}")" = "${_confname}"
-			then
-				printf '%s=%s\n' "${_specname}" "${_v}"
-				continue 2
-			fi
-		done <"${_match_file}"
-
-		# NOTE: Print test spec even for empty keys to suppress errors like:
-		#  'Match User' in configuration but 'user' not in connection test specification.
-		# except lport:
-		#  Invalid port '' in test mode specification lport=
-		test "${_specname}" = 'lport' || printf '%s=\n' "${_specname}"
-	done \
-	| joinlines ','
-	unset _match_file
-}
-
-sshd_config_file=$(cat "${__object:?}/parameter/file")
-state_should=$(cat "${__object:?}/parameter/state")
-
-if test -s "${__object:?}/parameter/option"
-then
-	option_name=$(cat "${__object:?}/parameter/option")
-else
-	option_name=${__object_id:?}
-fi
-
-value_should=$(cat "${__object:?}/parameter/value" 2>/dev/null) \
-|| test "${state_should}" = absent || exit 0  # param optional if --state absent
-
-command -v sshd >/dev/null 2>&1 || {
-	echo 'Cannot find sshd.' >&2
-	exit 1
-}
-
-test -e "${sshd_config_file}" || {
-	echo 'absent'
-	exit 0
-}
-
-value_is=$(
-	sshd -T -f "${sshd_config_file}" -C "$(make_conn_spec)" \
-	| sed -n -e 's/^'"$(tolower "${option_name}")"'[[:blank:]]\{1,\}//p')
-
-if printf '%s\n' "${value_is}" | {
-		if test -n "${value_should}"
-		then
-			grep -q -x -F "${value_should}"
-		else
-			# if no value provided, assume "any" value
-			grep -q -e .
-		fi
-	}
-then
-	if default_value "${option_name}" | grep -q -x -F "${value_is}"
-	then
-		# Might produce false positives for default values.
-		# TODO: Manual checking should be done, but for simplicity, this case is
-		#       currently ignored here.
-		echo default
-	else
-		echo present
-	fi
-else
-	echo absent
-fi

cdist/conf/type/__sshd_config/files/update_sshd_config.awk

@@ -1,293 +0,0 @@
-# -*- mode: awk; indent-tabs-mode: t -*-
-
-function usage() {
-	print_err("Usage: awk -f update_sshd_config.awk -- -o set|unset [-m 'User git'] -l 'X11Forwarding no' /etc/ssh/sshd_config")
-}
-
-function print_err(s) { print s | "cat >&2" }
-
-function alength(a,    i) {
-	for (i = 0; (i + 1) in a; ++i);
-	return i
-}
-
-function join(sep, a, i,    s) {
-	for (i = i ? i : 1; i in a; i++)
-		s = s sep a[i]
-	return substr(s, 2)
-}
-
-function getopt(opts, argv, target, files,    i, c, lv, idx, nf) {
-	# trivial getopt(3) implementation; only basic functionality
-	if (argv[1] == "--") i++
-	for (i += 1; i in argv; i++) {
-		if (lv) { target[c] = argv[i]; lv = 0; continue }
-		if (argv[i] ~ /^-/) {
-			c = substr(argv[i], 2, 1)
-			idx = index(opts, c)
-			if (!idx) {
-				print_err(sprintf("invalid option -%c\n", c))
-				continue
-			}
-			if (substr(opts, idx + 1, 1) == ":") {
-				# option takes argument
-				if (length(argv[i]) > 2)
-					target[c] = substr(argv[i], 3)
-				else
-					lv = 1
-			} else {
-				target[c] = 1
-			}
-		} else
-			files[++nf] = argv[i]
-	}
-}
-
-# tokenise configuration line
-# this function mimics the counterpart in OpenSSH (misc.c)
-# but it returns two (next token SUBSEP rest) because I didn’t want to have to
-# simulate any pointer magic.
-function strdelim_internal(s, split_equals,    old) {
-	if (!s)
-		return ""
-
-	old = s
-
-	if (!match(s, WHITESPACE "|" QUOTE "" (split_equals ? "|" EQUALS : "")))
-		return s
-
-	s = substr(s, RSTART)
-	old = substr(old, 1, RSTART - 1)
-
-	if (s ~ "^" QUOTE) {
-		old = substr(old, 2)
-
-		# Find matching quote
-		if (match(s, QUOTE)) {
-			old = substr(old, 1, RSTART)
-			# s = substr()
-			if (match(s, "^" WHITESPACE "*"))
-				s = substr(s, RLENGTH)
-			return old
-		} else {
-			# no matching quote
-			return ""
-		}
-	}
-
-	if (match(s, "^" WHITESPACE "+")) {
-		sub("^" WHITESPACE "+", "", s)
-		if (split_equals)
-			sub(EQUALS WHITESPACE "*", "", s)
-	} else if (s ~ "^" EQUALS) {
-		s = substr(s, 2)
-	}
-
-	return old SUBSEP s
-}
-function strdelim(s) { return strdelim_internal(s, 1) }
-function strdelimw(s) { return strdelim_internal(s, 0) }
-
-function singleton_option(opt) {
-	return tolower(opt) !~ /^(acceptenv|allowgroups|allowusers|denygroups|denyusers|hostcertificate|hostkey|listenaddress|logverbose|permitlisten|permitopen|port|setenv|subsystem)$/
-}
-
-function print_update() {
-	if (mode) {
-		if (match_only) printf "\t"
-		printf "%s\n", line_should
-		updated = 1
-	}
-}
-
-BEGIN {
-	FS = "\n"  # disable field splitting
-
-	WHITESPACE = "[ \t]"  # servconf.c, misc.c:strdelim_internal (without line breaks, cf. bugs)
-	QUOTE = "[\"]"  # misc.c:strdelim_internal
-	EQUALS = "[=]"
-
-	split("", opts)
-	split("", files)
-	getopt("ho:l:m:", ARGV, opts, files)
-
-	if (opts["h"]) { usage(); exit (e="0") }
-
-	line_should = opts["l"]
-	match_only = opts["m"]
-	num_files = alength(files)
-
-	if (num_files != 1 || !opts["o"] || !line_should) {
-		usage()
-		exit (e=126)
-	}
-
-	if (opts["o"] == "set") {
-		mode = 1
-	} else if (opts["o"] == "unset") {
-		mode = 0
-	} else {
-		print_err(sprintf("invalid mode %s\n", mode))
-		exit (e=1)
-	}
-
-	if (mode) {
-		# loop over sshd_config twice!
-		ARGV[2] = ARGV[1] = files[1]
-		ARGC = 3
-	} else {
-		# only loop once
-		ARGV[1] = files[1]
-		ARGC = 2
-	}
-
-	split(strdelim(line_should), should, SUBSEP)
-	option_should = tolower(should[1])
-	value_should = should[2]
-}
-
-{
-	line = $0
-
-	# Strip trailing whitespace. Allow \f (form feed) at EOL only
-	sub("(" WHITESPACE "|\f)*$", "", line)
-
-	# Strip leading whitespace
-	sub("^" WHITESPACE "*", "", line)
-
-	if (match(line, "^#" WHITESPACE "*")) {
-		prefix = substr(line, RSTART, RLENGTH)
-		line = substr(line, RSTART + RLENGTH)
-	} else {
-		prefix = ""
-	}
-
-	line_type = "invalid"
-	option_is = value_is = ""
-
-	if (line) {
-		split(strdelim(line), toks, SUBSEP)
-
-		if (tolower(toks[1]) == "match") {
-			MATCH = (prefix ~ /^#/ ? "#" : "") join(" ", toks, 2)
-			line_type = "match"
-		} else if (toks[1] ~ /^[A-Za-z][A-Za-z0-9]+$/) {
-			# This could be an option line
-			line_type = "option"
-			option_is = tolower(toks[1])
-			value_is = toks[2]
-		}
-	} else {
-		line_type = "empty"
-	}
-}
-
-# mode: unset
-
-!mode {
-	# delete matching config
-	if (prefix !~ /^#/)
-		if (MATCH == match_only && option_is == option_should)
-			if (!value_should || value_should == value_is)
-				next
-
-	print
-	next
-}
-
-
-# mode: set
-
-mode && NR == FNR {
-	if (line_type == "option") {
-		if (MATCH !~ /^#/) {
-			if (prefix ~ /^#/) {
-				# comment line
-				last_occ[MATCH, "#" option_is] = FNR
-			} else {
-				# option line
-				last_occ[MATCH, option_is] = FNR
-			}
-			last_occ[MATCH] = FNR
-		}
-	} else if (line_type == "invalid" && !prefix) {
-		# INVALID LINE
-		print_err(sprintf("%s: syntax error on line %u\n", ARGV[0], FNR))
-	}
-
-	next
-}
-
-# before second pass prepare hashes containing location information to be used
-# in the second pass.
-mode && NR > FNR && FNR == 1 {
-	# First we drop the locations of commented-out options if a non-commented
-	# option is available. If a non-commented option is available, we will
-	# append new config options there to have them all at one place.
-	for (k in last_occ) {
-		if (k ~ /^#/) {
-			# delete entries of commented out match blocks
-			delete last_occ[k]
-			continue
-		}
-
-		split(k, parts, SUBSEP)
-
-		if (parts[2] ~ /^#/ && ((parts[1], substr(parts[2], 2)) in last_occ))
-			delete last_occ[k]
-	}
-
-	# Reverse the option => line mapping. The line_map allows for easier lookups
-	# in the second pass.
-	# We only keep options, not top-level keywords, because we can only have
-	# one entry per line and there are conflicts with last lines of "sections".
-	for (k in last_occ) {
-		if (!index(k, SUBSEP)) continue
-		line_map[last_occ[k]] = k
-	}
-}
-
-# Second pass
-mode && line_map[FNR] == match_only SUBSEP option_should && !updated {
-	split(line_map[FNR], parts, SUBSEP)
-
-	# If option allows multiple values, print current value
-	if (!singleton_option(parts[2])) {
-		if (value_should != value_is)
-			print
-	}
-
-	print_update()
-
-	next
-}
-
-mode { print }
-
-# Is a comment option
-mode && line_map[FNR] == match_only SUBSEP "#" option_should && !updated {
-	print_update()
-}
-
-# Last line of the should match section
-mode && last_occ[match_only] == FNR && !updated {
-	# NOTE: Inserting empty lines is only cosmetic.  It is only done if
-	#       different options are next to each other and not in a match block
-	#       (match blocks are usually not in the default config and thus don’t
-	#       contain commented blocks.)
-	if (line && option_is != option_should && !MATCH)
-		print ""
-	print_update()
-}
-
-END {
-	if (e) exit e
-
-	if (mode && !updated) {
-		if (match_only && MATCH != match_only) {
-			printf "\nMatch %s\n", match_only
-		}
-
-		print_update()
-	}
-}

cdist/conf/type/__sshd_config/gencode-remote

@@ -1,98 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-joinlines() { sed -n -e H -e "\${x;s/^\\n//;s/\\n/${1:?}/g;p;}"; }
-
-state_is=$(cat "${__object:?}/explorer/state")
-state_should=$(cat "${__object:?}/parameter/state")
-
-if test "${state_is}" = "${state_should}" -o "${state_is}" = 'default'
-then
-	# nothing to do (if the value is the default, ignore its state)
-	exit 0
-fi
-
-case ${state_should}
-in
-	(present)
-		mode='set'
-		;;
-	(absent)
-		mode='unset'
-		;;
-	(*)
-		printf 'Invalid --state: %s\n' "${state_should}" >&2
-		exit 1
-		;;
-esac
-
-sshd_config_file=$(cat "${__object:?}/parameter/file")
-
-quote() { printf "'%s'" "$(printf '%s' "$*" | sed -e "s/'/'\\\\''/g")"; }
-drop_awk_comments() { quote "$(sed '/^[[:blank:]]*#.*$/d;/^$/d' "$@")"; }
-
-# Ensure the sshd_config file is there
-cat <<EOF
-test -e $(quote "${sshd_config_file}") || {
-	 : >$(quote "${sshd_config_file}")
-	 chown 0:0 $(quote "${sshd_config_file}")
-	 chmod 0644 $(quote "${sshd_config_file}")
-}
-
-EOF
-
-match_only=
-if test -s "${__object:?}/parameter/match"
-then
-	match_only=$(joinlines ' ' <"${__object:?}/parameter/match")
-fi
-
-if test -s "${__object:?}/parameter/option"
-then
-	option_line=$(cat "${__object:?}/parameter/option")
-else
-	option_line=${__object_id:?}
-fi
-
-if test -s "${__object:?}/parameter/value"
-then
-	option_line="${option_line} $(cat "${__object:?}/parameter/value")"
-fi
-
-# Send message on config update
-printf '%s%s %s\n' "${mode}" "${match_only:+ [${match_only}]}" \
-	"${option_line}" >>"${__messages_out:?}"
-
-# Update sshd_config (remote code)
-cat <<EOF
-awk $(drop_awk_comments "${__type:?}/files/update_sshd_config.awk") \\
-	-o ${mode} \\
-	-m $(quote "${match_only}") \\
-	-l $(quote "${option_line}") \\
-	$(quote "${sshd_config_file}") >$(quote "${sshd_config_file}.tmp") \\
-|| exit
-
-cmp -s $(quote "${sshd_config_file}") $(quote "${sshd_config_file}.tmp") || {
-	sshd -t -f $(quote "${sshd_config_file}.tmp") \\
-	&& cat $(quote "${sshd_config_file}.tmp") >$(quote "${sshd_config_file}") \\
-	|| exit  # stop if sshd_config file check fails
-}
-rm -f $(quote "${sshd_config_file}.tmp")
-EOF

cdist/conf/type/__sshd_config/man.rst

@@ -1,98 +0,0 @@
-cdist-type__sshd_config(7)
-==========================
-
-NAME
-----
-cdist-type__sshd_config - Manage options in sshd_config
-
-
-DESCRIPTION
------------
-This space intentionally left blank.
-
-
-REQUIRED PARAMETERS
--------------------
-None.
-
-
-OPTIONAL PARAMETERS
--------------------
-file
-    The path to the sshd_config file to edit.
-    Defaults to ``/etc/ssh/sshd_config``.
-match
-    Restrict this option to apply only for certain connections.
-    Allowed values are what would be allowed to be written after a ``Match``
-    keyword in ``sshd_config``, e.g. ``--match 'User anoncvs'``.
-
-    Can be used multiple times. All of the values are ANDed together.
-option
-    The name of the option to manipulate. Defaults to ``__object_id``.
-state
-    Can be:
-
-    - ``present``: ensure a matching config line is present (or the default
-      value).
-    - ``absent``: ensure no matching config line is present.
-value
-    The option's value to be assigned to the option (if ``--state present``) or
-    removed (if ``--state absent``).
-
-    This option is required if ``--state present``. If not specified and
-    ``--state absent``, all values for the given option are removed.
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Disallow root logins with password
-    __sshd_config PermitRootLogin --value without-password
-
-    # Disallow password-based authentication
-    __sshd_config PasswordAuthentication --value no
-
-    # Accept the EDITOR environment variable
-    __sshd_config AcceptEnv:EDITOR --option AcceptEnv --value EDITOR
-
-    # Force command for connections as git user
-    __sshd_config git@ForceCommand --match 'User git' --option ForceCommand \
-        --value 'cd ~git && exec git-shell ${SSH_ORIGINAL_COMMAND:+-c "${SSH_ORIGINAL_COMMAND}"}'
-
-
-SEE ALSO
---------
-:strong:`sshd_config`\ (5)
-
-
-BUGS
-----
-- This type assumes a nicely formatted config file,
-  i.e. no config options spanning multiple lines.
-- ``Include`` directives are ignored.
-- Config options are not added/removed to/from the config file if their value is
-  the default value.
-- | The explorer will incorrectly report ``absent`` if OpenSSH internally
-    transforms one value to another (e.g. ``permitrootlogin prohibit-password``
-    is transformed to ``permitrootlogin without-password``).
-  | Workaround: Use the value that OpenSSH uses internally.
-
-
-AUTHORS
--------
-Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
-
-
-COPYING
--------
-Copyright \(C) 2020 Dennis Camera. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__sshd_config/manifest

@@ -1,48 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-os=$(cat "${__global:?}/explorer/os")
-
-state_should=$(cat "${__object:?}/parameter/state")
-
-case ${os}
-in
-	(alpine|centos|fedora|redhat|scientific|debian|devuan|ubuntu)
-		if test "${state_should}" != 'absent'
-		then
-			__package openssh-server --state present
-		fi
-		;;
-	(archlinux|gentoo|slackware|suse)
-		if test "${state_should}" != 'absent'
-		then
-			__package openssh --state present
-		fi
-		;;
-	(freebsd|netbsd|openbsd)
-		# whitelist
-		;;
-	(*)
-		printf 'Your operating system (%s) is currently not supported by this type (%s)\n' \
-			"${os}" "${__type##*/}" >&2
-		printf 'Please contribute an implementation for it if you can.\n' >&2
-		exit 1
-		;;
-esac

cdist/conf/type/__sshd_config/parameter/default/file

@@ -1 +0,0 @@
-/etc/ssh/sshd_config

cdist/conf/type/__sshd_config/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__sshd_config/parameter/optional

@@ -1,4 +0,0 @@
-file
-option
-state
-value

cdist/conf/type/__sshd_config/parameter/optional_multiple

@@ -1 +0,0 @@
-match

cdist/conf/type/__uci/explorer/state

@@ -1,110 +0,0 @@
-#!/bin/sh
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# This explorer retrieves the current state of the configuration option
-# The output of this explorer is one of these values:
-#   present
-#     The configuration option is present and has the value of the
-#     parameter --value.
-#   absent
-#     The configuration option is not defined.
-#   different
-#     The configuration option is present but has a different value than the
-#     parameter --value.
-#   rearranged
-#     The configuration option is present (a list) and has the same values as
-#     the parameter --value, but in a different order.
-
-RS=$(printf '\036')
-
-option=${__object_id:?}
-
-values_is=$(uci -s -N -d "${RS}" get "${option}" 2>/dev/null) || {
-	echo absent
-	exit 0
-}
-
-if test -f "${__object:?}/parameter/value"
-then
-	should_file="${__object:?}/parameter/value"
-else
-	should_file='/dev/null'
-fi
-
-
-# strip off trailing newline
-printf '%s' "${values_is}" \
-| awk '
-function unquote(s) {
-	# simplified dequoting of single quoted strings
-	if (s ~ /^'\''.*'\''$/) {
-		s = substr(s, 2, length(s) - 2)
-		sub(/'"'\\\\''"'/, "'\''", s)
-	}
-	return s
-}
-
-BEGIN {
-	state = "present"  # assume all is fine
-}
-NR == FNR {
-	# memoize "should" state
-	should[FNR] = $0
-	should_count++
-
-	# go to next line (important!)
-	next
-}
-
-# compare "is" state
-
-{ $0 = unquote($0) }
-
-$0 == should[FNR] { next }
-
-FNR > should_count {
-	# there are more "is" records than "should" -> definitely different
-	state = "different"
-	exit
-}
-
-{
-	# see if we can find the value somewhere in should
-	for (i in should) {
-		if ($0 == should[i]) {
-			# ... value found -> rearranged
-			# FIXME: Duplicate values are not properly handled here. Do they matter?
-			state = "rearranged"
-			next
-		}
-	}
-
-	state = "different"
-	exit
-}
-
-END {
-	if (FNR < should_count) {
-		# "is" was shorter than "should" -> different
-		state = "different"
-	}
-
-	print state
-}
-' "${should_file}" RS="${RS}" -

cdist/conf/type/__uci/files/functions.sh

@@ -1,73 +0,0 @@
-# -*- mode: sh; indent-tabs-mode: t -*-
-
-in_list() {
-	printf '%s\n' "$@" | { grep -qxF "$(read -r ndl; echo "${ndl}")"; }
-}
-
-quote() {
-	for _arg
-	do
-		shift
-		if test -n "$(printf %s "${_arg}" | tr -d -c '\t\n \042-\047\050-\052\073-\077\133\\`|~' | tr -c '' '.')"
-		then
-			# needs quoting
-			set -- "$@" "$(printf "'%s'" "$(printf %s "${_arg}" | sed -e "s/'/'\\\\''/g")")"
-		else
-			set -- "$@" "${_arg}"
-		fi
-	done
-	unset _arg
-
-	# NOTE: Use printf because POSIX echo interprets escape sequences
-	printf '%s' "$*"
-}
-
-uci_cmd() {
-	# Usage: uci_cmd [UCI ARGUMENTS]...
-	mkdir -p "${__object:?}/files"
-	printf '%s\n' "$(quote "$@")" >>"${__object:?}/files/uci_batch.txt"
-}
-
-uci_validate_name() {
-	# like util.c uci_validate_name()
-	test -n "$*" && test -z "$(echo "$*" | tr -d '[:alnum:]_')"
-}
-
-uci_validate_tuple() (
-	tok=${1:?}
-	case $tok
-	in
-		(*.*.*)
-			# check option
-			option=${tok##*.}
-			uci_validate_name "${option}" || {
-				printf 'Invalid option: %s\n' "${option}" >&2
-				return 1
-			}
-			tok=${tok%.*}
-			;;
-		(*.*)
-			# no option (section definition)
-			;;
-		(*)
-			printf 'Invalid tuple: %s\n' "$1" >&2
-			return 1
-			;;
-	esac
-
-	case ${tok#*.}
-	in
-		(@*) section=$(expr "${tok#*.}" : '@\(.*\)\[-*[0-9]*\]$') ;;
-		(*)  section=${tok#*.} ;;
-	esac
-	uci_validate_name "${section}" || {
-		printf 'Invalid section: %s\n' "${1#*.}" >&2
-		return 1
-	}
-
-	config=${tok%%.*}
-	uci_validate_name "${config}" || {
-		printf 'Invalid config: %s\n' "${config}" >&2
-		return 1
-	}
-)

cdist/conf/type/__uci/files/uci_apply.sh

@@ -1,43 +0,0 @@
-changes=$(uci changes)
-
-if test -n "${changes}"
-then
-	echo 'Uncommited UCI changes were found on the target:'
-	printf '%s\n\n' "${changes}"
-	echo 'This can be caused by manual changes or due to a previous failed run.'
-	echo 'Please investigate the situation, revert or commit the changes, and try again.'
-	exit 1
-fi >&2
-
-check_errors() {
-	# reads stdin and forwards non-empty lines to stderr.
-	# returns 0 if stdin is empty, else 1.
-	! grep -e . >&2
-}
-
-commit() {
-	uci commit
-}
-
-rollback() {
-	printf '\nAn error occurred when trying to commit UCI transaction!\n' >&2
-
-	uci changes \
-	| sed -e 's/^-//' -e 's/\..*\$//' \
-	| sort -u \
-	| while read -r _package
-	  do
-		  uci revert "${_package}"
-		  echo "${_package}"  # for logging
-	  done \
-	| awk '
-	  BEGIN { printf "Reverted changes in: " }
-	  { printf "%s%s", (FNR > 1 ? ", " : ""), $0 }
-	  END { printf "\n" }' >&2
-
-	return 1
-}
-
-uci_apply() {
-	uci batch 2>&1 | check_errors && commit || rollback
-}

cdist/conf/type/__uci/gencode-remote

@@ -1,101 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera@ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# shellcheck source=cdist/conf/type/__uci/files/functions.sh
-. "${__type:?}/files/functions.sh"
-
-state_is=$(cat "${__object:?}/explorer/state")
-state_should=$(cat "${__object:?}/parameter/state")
-
-config=${__object_id:?}
-uci_validate_tuple "${config}"
-
-
-case ${state_should}
-in
-	(present)
-		if in_list "${state_is}" 'present' 'rearranged'
-		then
-			# NOTE: order is ignored so rearranged is also fine.
-			exit 0
-		fi
-
-		# Determine type
-		type=$(cat "${__object:?}/parameter/type" 2>/dev/null || true)
-		case ${type}
-		in
-			(option|list) ;;
-			('')
-				# Guess type by the number of values
-				test "$(wc -l "${__object:?}/parameter/value")" -gt 1 \
-					 && type=list \
-					 || type=option
-				;;
-			(*)
-				printf 'Invalid --type: %s\n' "${type}" >&2
-				exit 1
-				;;
-		esac
-
-		case ${type}
-		in
-			(list)
-				printf 'set_list %s\n' "${config}" >>"${__messages_out:?}"
-
-				if test "${state_is}" != 'absent'
-				then
-					uci_cmd delete "${config}"
-				fi
-
-				while read -r value
-				do
-					uci_cmd add_list "${config}"="${value}"
-				done <"${__object:?}/parameter/value"
-				;;
-			(option)
-				printf 'set %s\n' "${config}" >>"${__messages_out:?}"
-
-				value=$(cat "${__object:?}/parameter/value")
-				uci_cmd set "${config}"="${value}"
-				;;
-		esac
-		;;
-	(absent)
-		if in_list "${state_is}" 'absent'
-		then
-			exit 0
-		fi
-
-		printf 'delete %s\n' "${config}" >>"${__messages_out:?}"
-		uci_cmd delete "${config}"
-		;;
-	(*)
-		printf 'Invalid --state: %s\n' "${state_should}" >&2
-		exit 1
-		;;
-esac
-
-if test -s "${__object:?}/files/uci_batch.txt"
-then
-	cat "${__type:?}/files/uci_apply.sh"
-	printf "uci_apply <<'EOF'\n"
-	cat "${__object:?}/files/uci_batch.txt"
-	printf '\nEOF\n'
-fi

cdist/conf/type/__uci/man.rst

@@ -1,78 +0,0 @@
-cdist-type__uci(7)
-==================
-
-NAME
-----
-cdist-type__uci - Manage configuration values in UCI
-
-
-DESCRIPTION
------------
-This cdist type can be used to alter configuration options in OpenWrt's
-Unified Configuration Interface (UCI) system.
-
-
-REQUIRED PARAMETERS
--------------------
-value
-    The value to be set. Can be used multiple times.
-    This parameter is ignored if ``--state`` is ``absent``.
-
-    Due to the way cdist handles arguments, values **must not** contain newline
-    characters.
-
-    Values do not need special quoting for UCI. The only requirement is that the
-    value is passed to the type as a single shell argument.
-
-OPTIONAL PARAMETERS
--------------------
-state
-    ``present`` or ``absent``, defaults to ``present``.
-type
-    If the type should generate an option or a list.
-    One of: ``option`` or ``list``.
-    Defaults to auto-detect based on the number of ``--value`` parameters.
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # Set the system hostname
-    __uci system.@system[0].hostname --value 'OpenWrt'
-
-    # Set DHCP option 252: tell DHCP clients to not ask for proxy information.
-    __uci dhcp.lan.dhcp_option --type list --value '252,"\n"'
-
-    # Enable NTP and NTPd (each is applied individually)
-    __uci system.ntp.enabled --value 1
-    __uci system.ntp.enable_server --value 1
-    __uci system.ntp.server --type list \
-        --value '0.openwrt.pool.ntp.org' \
-        --value '1.openwrt.pool.ntp.org' \
-        --value '2.openwrt.pool.ntp.org' \
-        --value '3.openwrt.pool.ntp.org'
-
-
-SEE ALSO
---------
-- https://openwrt.org/docs/guide-user/base-system/uci
-
-
-AUTHORS
--------
-Dennis Camera <dennis.camera@ssrq-sds-fds.ch>
-
-
-COPYING
--------
-Copyright \(C) 2020 Dennis Camera. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__uci/manifest

@@ -1,51 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera@ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-os=$(cat "${__global:?}/explorer/os")
-
-state_should=$(cat "${__object:?}/parameter/state")
-
-case ${os}
-in
-	(openwrt)
-		# okay
-		;;
-	(*)
-		printf "Your operating system (%s) is currently not supported by this type (%s)\n" "${os}" "${__type##*/}" >&2
-		printf "Please contribute an implementation for it if you can.\n" >&2
-		exit 1
-		;;
-esac
-
-case ${state_should}
-in
-	(present)
-		test -s "${__object:?}/parameter/value" || {
-			echo 'The parameter --value is required.' >&2
-			exit 1
-		}
-		;;
-	(absent)
-		;;
-	(*)
-		printf 'Invalid --state: %s\n' "${state_should}" >&2
-		exit 1
-		;;
-esac

cdist/conf/type/__uci/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__uci/parameter/optional

@@ -1,2 +0,0 @@
-state
-type

cdist/conf/type/__uci/parameter/optional_multiple

@@ -1 +0,0 @@
-value

cdist/conf/type/__uci_section/explorer/match

@@ -1,103 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# This explorer determines the "prefix" of the --type section matching --match
-# if set, or __object_id otherwise.
-
-RS=$(printf '\036')
-NL=$(printf '\n '); NL=${NL% }
-
-squote_values() {
-	sed -e '/=".*"$/{s/="/='\''/;s/"$/'\''/}' \
-	    -e "/='.*'$/"'!{s/=/='\''/;s/$/'\''/}'
-}
-count_lines() (
-	IFS=${NL?}
-	# shellcheck disable=SC2048,SC2086
-	set -f -- $*; echo $#
-)
-
-echo "${__object_id:?}" | grep -q -e '^[^.]\{1,\}\.[^.]\{1,\}$' || {
-	echo 'Section identifiers are a package and section name separated by a "." (period).' >&2
-	exit 1
-}
-
-test -s "${__object:?}/parameter/match" || {
-	# If no --match is given, we take the __object_id as the section identifier.
-	echo "${__object_id:?}"
-	exit 0
-}
-test -s "${__object:?}/parameter/type" || {
-	echo 'Parameters --match and --type must be used together.' >&2
-	exit 1
-}
-
-sect_type_param=$(cat "${__object:?}/parameter/type")
-expr "${sect_type_param}" : '[^.]\{1,\}\.[^.]\{1,\}$' >/dev/null 2>&1 || {
-	echo 'Section types are a package name and section type separated by a "." (period).' >&2
-	exit 1
-}
-package_filter=${sect_type_param%%.*}
-section_filter=${sect_type_param#*.}
-
-# Find by --match
-# NOTE: Apart from section types all values are printed in single quotes by uci show.
-match=$(head -n 1 "${__object:?}/parameter/match" | squote_values)
-
-if uci -s -N get "${__object_id:?}" >/dev/null 2>&1
-then
-	# Named section exists: ensure if --match applies to it
-	# if the "matched" option does not exist (e.g. empty section) we use the
-	# section unconditionally.
-	if match_value_is=$(uci -s -N get "${__object_id:?}.${match%%=*}" 2>/dev/null)
-	then
-		match_value_should=$(expr "${match}" : ".*='\\(.*\\)'$")
-
-		test "${match_value_is}" = "${match_value_should}" || {
-			printf 'Named section "%s" does not match --match "%s"\n' \
-				   "${__object_id:?}" "${match}" >&2
-			exit 1
-		}
-	fi
-
-	echo "${__object_id:?}"
-	exit 0
-fi
-
-# No correctly named section exists already: find one to which --match applies
-regex="^${package_filter}\\.@${section_filter}\\[[0-9]\\{1,\\}\\]\\.${match%%=*}="
-
-matched_sections=$(
-	uci -s -N -d "${RS}" show "${package_filter}" 2>/dev/null \
-	| grep -e "${regex}" \
-	| while read -r _line
-	  do
-		  if test "${_line#*=}" = "${match#*=}"
-		  then
-			  echo "${_line}"
-		  fi
-	  done \
-	| sed -e 's/\.[^.]*=.*$//')
-
-test "$(count_lines "${matched_sections}")" -le 1 || {
-	printf 'Found multiple matching sections:\n%s\n' "${matched_sections}" >&2
-	exit 1
-}
-
-echo "${matched_sections}"

cdist/conf/type/__uci_section/explorer/options

@@ -1,48 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# This explorer retrieves the current options of the configuration section.
-
-RS=$(printf '\036')
-
-section=$("${__type_explorer:?}/match")
-test -n "${section}" || exit 0
-
-uci -s -N -d "${RS}" show "${section}" 2>/dev/null \
-| awk -v VSEP="${RS}" '
-  {
-	  # Strip off the config and section parts
-	  is_opt = sub(/^([^.]*\.){2}/, "")
-
-	  if (!is_opt) {
-		  # this line represents the section -> skip
-		  next
-	  }
-
-	  if (index($0, VSEP)) {
-		  # Put values each on a line, like --option and --list parameters
-		  opt = substr($0, 1, index($0, "=") - 1)
-		  split(substr($0, length(opt) + 2), values, VSEP)
-		  for (i in values) {
-			  printf "%s=%s\n", opt, values[i]
-		  }
-	  } else {
-		  print
-	  }
-  }'

cdist/conf/type/__uci_section/explorer/type

@@ -1,25 +0,0 @@
-#!/bin/sh -e
-#
-# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# This explorer retrieves the current section type.
-
-section=$("${__type_explorer:?}/match")
-test -n "${section}" || exit 0
-
-uci -s -N get "${section}" 2>/dev/null || true

cdist/conf/type/__uci_section/files/functions.sh

@@ -1,59 +0,0 @@
-# -*- mode: sh; indent-tabs-mode: t -*-
-
-NL=$(printf '\n '); NL=${NL% }
-
-grep_line() {
-	{ shift; printf '%s\n' "$@"; } | grep -qxF "$1"
-}
-
-print_errors() {
-	awk -v prefix="${1:-Found errors:}" -v suffix="${2-}" '
-		BEGIN {
-			if (getline) {
-				print prefix
-				print
-				rc = 1
-			}
-		}
-		{ print }
-		END {
-			if (rc && suffix) print suffix
-			exit rc
-		}' >&2
-}
-
-quote() {
-	for _arg
-	do
-		shift
-		if test -n "$(printf %s "${_arg}" | tr -d -c '\t\n \042-\047\050-\052\073-\077\133\\`|~' | tr -c '' '.')"
-		then
-			# needs quoting
-			set -- "$@" "$(printf "'%s'" "$(printf %s "${_arg}" | sed -e "s/'/'\\\\''/g")")"
-		else
-			set -- "$@" "${_arg}"
-		fi
-	done
-	unset _arg
-	printf '%s' "$*"
-}
-
-uci_cmd() {
-	# Usage: uci_cmd [UCI ARGUMENTS]...
-	mkdir -p "${__object:?}/files"
-	printf '%s\n' "$(quote "$@")" >>"${__object:?}/files/uci_batch.txt"
-}
-
-uci_validate_name() {
-	# like util.c uci_validate_name()
-	test -n "$*" && test -z "$(printf %s "$*" | tr -d '[:alnum:]_' | tr -c '' .)"
-}
-
-unquote_lines() {
-	sed -e '/^".*"$/{s/^"//;s/"$//}' \
-	    -e '/'"^'.*'"'$/{s/'"^'"'//;s/'"'$"'//}'
-}
-
-validate_options() {
-	grep -shv -e '^[[:alnum:]_]\{1,\}=' "$@"
-}