Makefile

@@ -35,9 +35,9 @@ DOCS_SRC_DIR=./docs/src
 SPEECHDIR=./docs/speeches
 TYPEDIR=./cdist/conf/type
 
-SPHINXM=$(MAKE) -C $(DOCS_SRC_DIR) man
-SPHINXH=$(MAKE) -C $(DOCS_SRC_DIR) html
-SPHINXC=$(MAKE) -C $(DOCS_SRC_DIR) clean
+SPHINXM=make -C $(DOCS_SRC_DIR) man
+SPHINXH=make -C $(DOCS_SRC_DIR) html
+SPHINXC=make -C $(DOCS_SRC_DIR) clean
 
 ################################################################################
 # Manpages

README.md

@@ -24,8 +24,8 @@ For community-maintained types there is
 
 ## Participating
 
-IRC: ``#cdist`` @ [libera](https://libera.chat)
+IRC: ``#cdist`` @ freenode
 
 Matrix: ``#cdist:ungleich.ch``
 
-Matrix and IRC are bridged.
+Mattermost: https://chat.ungleich.ch/ungleich/channels/cdist

cdist/argparse.py

@@ -485,31 +485,19 @@ def get_parsers():
     parser['scan'].add_argument(
         '-m', '--mode', help='Which modes should run',
         action='append', default=[],
-        choices=['scan', 'trigger', 'config'])
-    parser['scan'].add_argument(
-        '--list',
-        action='store_true',
-        help='List the known hosts and exit')
+        choices=['scan', 'trigger'])
     parser['scan'].add_argument(
         '--config',
         action='store_true',
         help='Try to configure detected hosts')
     parser['scan'].add_argument(
-        '-I', '--interface',
-        action='append',  default=[], required=True,
+        '-I', '--interfaces',
+        action='append',  default=[],
         help='On which interfaces to scan/trigger')
     parser['scan'].add_argument(
-        '--name-mapper',
-        action='store',  default=None,
-        help='Map addresses to names, required for config mode')
-    parser['scan'].add_argument(
-        '-d', '--config-delay',
-        action='store',  default=3600, type=int,
-        help='How long (seconds) to wait before reconfiguring after last try')
-    parser['scan'].add_argument(
-        '-t', '--trigger-delay',
-        action='store',  default=5, type=int,
-        help='How long (seconds) to wait between ICMPv6 echo requests')
+        '-d', '--delay',
+        action='store',  default=3600,
+        help='How long to wait before reconfiguring after last try')
     parser['scan'].set_defaults(func=cdist.scan.commandline.commandline)
 
     for p in parser:

cdist/conf/explorer/memory

@@ -27,18 +27,19 @@
 str2bytes() {
 	awk -F' ' '
 	$2 ==   "B" || !$2 { print $1 }
-	$2 ==  "kB" { printf "%.f\n", ($1 * 1000) }
-	$2 ==  "MB" { printf "%.f\n", ($1 * 1000 * 1000) }
-	$2 ==  "GB" { printf "%.f\n", ($1 * 1000 * 1000 * 1000) }
-	$2 ==  "TB" { printf "%.f\n", ($1 * 1000 * 1000 * 1000 * 1000) }
-	$2 == "kiB" { printf "%.f\n", ($1 * 1024) }
-	$2 == "MiB" { printf "%.f\n", ($1 * 1024 * 1024) }
-	$2 == "GiB" { printf "%.f\n", ($1 * 1024 * 1024 * 1024) }
-	$2 == "TiB" { printf "%.f\n", ($1 * 1024 * 1024 * 1024 * 1024) }'
+	$2 ==  "kB" { print $1 * 1000 }
+	$2 ==  "MB" { print $1 * 1000 * 1000 }
+	$2 ==  "GB" { print $1 * 1000 * 1000 * 1000 }
+	$2 ==  "TB" { print $1 * 1000 * 1000 * 1000 * 1000 }
+	$2 == "kiB" { print $1 * 1024 }
+	$2 == "MiB" { print $1 * 1024 * 1024 }
+	$2 == "GiB" { print $1 * 1024 * 1024 * 1024 }
+	$2 == "TiB" { print $1 * 1024 * 1024 * 1024 * 1024 }'
 }
 
 bytes2kib() {
-	awk '$0 > 0 { printf "%.f\n", ($0 / 1024) }'
+	set -- "$(cat)"
+	test "$1" -gt 0 && echo $(($1 / 1024))
 }
 
 

cdist/conf/explorer/os_version

@@ -1,7 +1,6 @@
-#!/bin/sh -e
+#!/bin/sh
 #
 # 2010-2011 Nico Schottelius (nico-cdist at schottelius.org)
-# 2020-2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -18,22 +17,12 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
+#
 # All os variables are lower case
 #
+#
 
-rc_getvar() {
-   awk -F= -v varname="$2" '
-      function unquote(s) {
-         if (s ~ /^".*"$/ || s ~ /^'\''.*'\''$/)
-            return substr(s, 2, length(s) - 2)
-         else
-            return s
-      }
-      $1 == varname { print unquote(substr($0, index($0, "=") + 1)) }' "$1"
-}
-
-case $("${__explorer:?}/os")
-in
+case "$("$__explorer/os")" in
    amazon)
       cat /etc/system-release
    ;;
@@ -54,8 +43,6 @@ in
               # sid versions don't have a number, so we decode by codename:
               case $(expr "$debian_version" : '\([a-z]\{1,\}\)/')
               in
-                  trixie) echo 12.99 ;;
-                  bookworm) echo 11.99 ;;
                   bullseye) echo 10.99 ;;
                   buster) echo 9.99 ;;
                   stretch) echo 8.99 ;;
@@ -63,7 +50,7 @@ in
                   wheezy) echo 6.99 ;;
                   squeeze) echo 5.99 ;;
                   lenny) echo 4.99 ;;
-                  *) echo 99.99 ;;
+                  *) exit 1
               esac
               ;;
           *)
@@ -72,23 +59,7 @@ in
       esac
    ;;
    devuan)
-      devuan_version=$(cat /etc/devuan_version)
-      case ${devuan_version}
-      in
-         (*/ceres)
-            # ceres versions don't have a number, so we decode by codename:
-            case ${devuan_version}
-            in
-               (chimaera/ceres) echo 3.99 ;;
-               (beowulf/ceres) echo 2.99 ;;
-               (ascii/ceres) echo 1.99 ;;
-               (*) exit 1
-            esac
-            ;;
-         (*)
-            echo "${devuan_version}"
-            ;;
-      esac
+      cat /etc/devuan_version
    ;;
    fedora)
       cat /etc/fedora-release
@@ -97,20 +68,12 @@ in
       cat /etc/gentoo-release
    ;;
    macosx)
-      # NOTE: Legacy versions (< 10.3) do not support options
-      sw_vers | awk -F ':[ \t]+' '$1 == "ProductVersion" { print $2 }'
+      sw_vers -productVersion
    ;;
    freebsd)
       # Apparently uname -r is not a reliable way to get the patch level.
       # See: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=251743
-      if command -v freebsd-version >/dev/null 2>&1
-      then
-         # get userland version
-         freebsd-version -u
-      else
-         # fallback to kernel release for FreeBSD < 10.0
-         uname -r
-      fi
+      freebsd-version
    ;;
    *bsd|solaris)
       uname -r
@@ -135,20 +98,7 @@ in
       fi
    ;;
    ubuntu)
-      if command -v lsb_release >/dev/null 2>&1
-      then
-         lsb_release -sr
-      elif test -r /usr/lib/os-release
-      then
-         # fallback to /usr/lib/os-release if lsb_release is not present (like
-         # on minimized Ubuntu installations)
-         rc_getvar /usr/lib/os-release VERSION_ID
-      elif test -r /etc/lsb-release
-      then
-         # extract DISTRIB_RELEASE= variable from /etc/lsb-release on old
-         # versions without /usr/lib/os-release.
-         rc_getvar /etc/lsb-release DISTRIB_RELEASE
-      fi
+      lsb_release -sr
    ;;
    alpine)
        cat /etc/alpine-release

cdist/conf/type/__apt_backports/manifest

@@ -28,7 +28,6 @@
 #  lsb_release may not be given in all installations
 codename_os_release() {
     # shellcheck disable=SC1090
-    # shellcheck disable=SC1091
     . "$__global/explorer/os_release"
     printf "%s" "$VERSION_CODENAME"
 }

cdist/conf/type/__apt_pin/man.rst

@@ -1,79 +0,0 @@
-cdist-type__apt_pin(7)
-======================
-
-NAME
-----
-cdist-type__apt_pin - Manage apt pinning rules
-
-
-DESCRIPTION
------------
-Adds/removes/edits rules to pin some packages to a specific distribution. Useful if using multiple debian repositories at the same time. (Useful, if one wants to use a few specific packages from backports or perhaps Debain testing... or even sid.)
-
-
-REQUIRED PARAMETERS
--------------------
-distribution
-   Specifies what distribution the package should be pinned to. Accepts both codenames (buster/bullseye/sid) and suite names (stable/testing/...).
-
-
-OPTIONAL PARAMETERS
--------------------
-package
-   Package name, glob or regular expression to match (multiple) packages. If not specified `__object_id` is used.
-
-priority
-   The priority value to assign to matching packages. Deafults to 500. (To match the default target distro's priority)
-
-state
-   Will be passed to underlying `__file` type; see there for valid values and defaults.
-
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-   # Add the bullseye repo to buster, but do not install any packages by default,
-   # only if explicitely asked for (-1 means "never" for apt)
-    __apt_pin bullseye-default \
-       --package "*" \
-       --distribution bullseye \
-       --priority -1
-
-    require="__apt_pin/bullseye-default" __apt_source bullseye \
-       --uri http://deb.debian.org/debian/ \
-       --distribution bullseye \
-       --component main
-
-    __apt_pin foo --package "foo foo-*" --distribution bullseye
-
-    __foo # Assuming, this installs the `foo` package internally
-
-    __package foo-plugin-extras # Assuming we also need some extra stuff
-
-
-SEE ALSO
---------
-:strong:`apt_preferences`\ (5)
-:strong:`cdist-type__apt_source`\ (7)
-:strong:`cdist-type__apt_backports`\ (7)
-:strong:`cdist-type__file`\ (7)
-
-AUTHORS
--------
-Daniel Fancsali <fancsali@gmail.com>
-
-
-COPYING
--------
-Copyright \(C) 2021 Daniel Fancsali. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

cdist/conf/type/__apt_pin/manifest

@@ -1,63 +0,0 @@
-#!/bin/sh -e
-#
-# 2021 Daniel Fancsali (fancsali@gmail.com)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-
-name="$__object_id"
-
-os=$(cat "$__global/explorer/os")
-state="$(cat "$__object/parameter/state")"
-
-if [ -f "$__object/parameter/package" ]; then
-    package="$(cat "$__object/parameter/package")"
-else
-    package=$name
-fi
-
-distribution="$(cat "$__object/parameter/distribution")"
-priority="$(cat "$__object/parameter/priority")"
-
-
-case "$os" in
-   debian|ubuntu|devuan)
-   ;;
-   *)
-      printf "This type is specific to Debian and it's derivatives" >&2
-      exit 1
-   ;;
-esac
-
-case $distribution in
-    stable|testing|unstable|experimental)
-        pin="release a=$distribution"
-        ;;
-    *)
-        pin="release n=$distribution"
-        ;;
-esac
-
-
-__file "/etc/apt/preferences.d/$name" \
-    --owner root --group root --mode 0644 \
-    --state "$state" \
-    --source - << EOF
-Package: $package
-Pin: $pin
-Pin-Priority: $priority
-EOF

cdist/conf/type/__apt_pin/parameter/default/state

@@ -1 +0,0 @@
-present

cdist/conf/type/__apt_pin/parameter/optional

@@ -1,2 +0,0 @@
-state
-package

cdist/conf/type/__apt_pin/parameter/required

@@ -1,2 +0,0 @@
-distribution
-priority

cdist/conf/type/__apt_source/gencode-remote

@@ -22,21 +22,7 @@
 name="$__object_id"
 destination="/etc/apt/sources.list.d/${name}.list"
 
-# There are special arguments to apt(8) to prevent aborts if apt woudn't been
-# updated after the 19th April 2021 till the bullseye release. The additional
-# arguments acknoledge the happend suite change (the apt(8) update does the
-# same by itself).
-#
-# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-# allows backward compatablility to pre-buster Debian versions.
-#
-# See more: ticket #861
-# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
-# run 'apt-get update' only if something changed with our sources.list file
-#   it will be run a second time on error as a redundancy messure to success
 if grep -q "^__file${destination}" "$__messages_in"; then
-   printf 'apt-get %s update || apt-get %s update\n' "$apt_opts" "$apt_opts"
+   printf 'apt-get update || apt-get update\n'
 fi
 

cdist/conf/type/__apt_update_index/gencode-remote

@@ -18,23 +18,9 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-
-# There are special arguments to apt(8) to prevent aborts if apt woudn't been
-# updated after the 19th April 2021 till the bullseye release. The additional
-# arguments acknoledge the happend suite change (the apt(8) update does the
-# same by itself).
-#
-# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-# allows backward compatablility to pre-buster Debian versions.
-#
-# See more: ticket #861
-# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
 # run 'apt-get update' if anything in /etc/apt is newer then /var/lib/apt/lists
-#   it will be run a second time on error as a redundancy messure to success
 cat << DONE
 if find /etc/apt -mindepth 1 -cnewer /var/lib/apt/lists | grep . > /dev/null; then
-   apt-get $apt_opts update || apt-get $apt_opts update
+   apt-get update || apt-get update
 fi
 DONE

cdist/conf/type/__debconf_set_selections/explorer/state

@@ -1,142 +0,0 @@
-#!/bin/sh -e
-#
-# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-# Determine current debconf selections' state.
-# Prints one of:
-#   present: all selections are already set as they should.
-#   different: one or more of the selections have a different value.
-#   absent: one or more of the selections are not (currently) defined.
-#
-
-test -x /usr/bin/perl || {
-	# cannot find perl (no perl ~ no debconf)
-	echo 'absent'
-	exit 0
-}
-
-linesfile="${__object:?}/parameter/line"
-test -s "${linesfile}" || {
-	if test -s "${__object:?}/parameter/file"
-	then
-		echo absent
-	else
-		echo present
-	fi
-	exit 0
-}
-
-# assert __type_explorer is set (because it is used by the Perl script)
-: "${__type_explorer:?}"
-
-/usr/bin/perl -- - "${linesfile}" <<'EOF'
-use strict;
-use warnings "all";
-
-use Fcntl qw(:DEFAULT :flock);
-
-use Debconf::Db;
-use Debconf::Question;
-
-# Extract @known... arrays from debconf-set-selections
-# These values are required to distinguish flags and values in the given lines.
-# DC: I couldn't think of a more ugly solution to the problem…
-my @knownflags;
-my @knowntypes;
-my $debconf_set_selections = '/usr/bin/debconf-set-selections';
-if (-e $debconf_set_selections) {
-	my $sed_known = 's/^my \(@known\(flags\|types\) = qw([a-z ]*);\).*$/\1/p';
-	eval `sed -n '$sed_known' '$debconf_set_selections'`;
-}
-
-sub mungeline ($) {
-	my $line = shift;
-	chomp $line;
-	$line =~ s/\r$//;
-	return $line;
-}
-
-sub fatal { printf STDERR @_; exit 1; }
-
-my $state = 'present';
-
-sub state {
-	my $new = shift;
-	if ($state eq 'present'
-	    or ($state eq 'different' and $new eq 'absent')) {
-		$state = $new;
-	}
-}
-
-
-# Load Debconf DB but manually lock on the state explorer script,
-# because Debconf aborts immediately if executed concurrently.
-# This is not really an ideal solution because the Debconf DB could be locked by
-# another process (e.g. apt-get), but no way to achieve this could be found.
-# If you know how to, please provide a patch.
-my $lockfile = "%ENV{'__type_explorer'}/state";
-if (open my $lock_fh, '+<', $lockfile) {
-   flock $lock_fh, LOCK_EX or die "Cannot lock $lockfile";
-}
-{
-	Debconf::Db->load(readonly => 'true');
-}
-
-
-while (<>) {
-	# Read and process lines (taken from debconf-set-selections)
-	$_ = mungeline($_);
-	while (/\\$/ && ! eof) {
-		s/\\$//;
-		$_ .= mungeline(<>);
-	}
-	next if /^\s*$/ || /^\s*\#/;
-
-	my ($owner, $label, $type, $content) = /^\s*(\S+)\s+(\S+)\s+(\S+)(?:\s(.*))?/
-		or fatal "invalid line: %s\n", $_;
-	$content = '' unless defined $content;
-
-
-	# Compare is and should state
-	my $q = Debconf::Question->get($label);
-
-	unless (defined $q) {
-		# probably a preseed
-		state 'absent';
-		next;
-	}
-
-	if (grep { $_ eq $q->type } @knownflags) {
-		# This line wants to set a flag, presumably.
-		if ($q->flag($q->type) ne $content) {
-			state 'different';
-		}
-	} else {
-		# Otherwise, it's probably a value…
-		if ($q->value ne $content) {
-			state 'different';
-		}
-
-		unless (grep { $_ eq $owner } (split /, /, $q->owners)) {
-			state 'different';
-		}
-	}
-}
-
-printf "%s\n", $state;
-EOF

cdist/conf/type/__debconf_set_selections/gencode-remote

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 #
 # 2011-2014 Nico Schottelius (nico-cdist at schottelius.org)
-# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -18,37 +17,16 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
+#
+# Setup selections
+#
 
-if test -f "${__object:?}/parameter/line"
-then
-	filename="${__object:?}/parameter/line"
-elif test -s "${__object:?}/parameter/file"
-then
-	filename=$(cat "${__object:?}/parameter/file")
-	if test "${filename}" = '-'
-	then
-		filename="${__object:?}/stdin"
-	fi
-else
-	printf 'Neither --line nor --file set.\n' >&2
-	exit 1
+filename="$(cat "$__object/parameter/file")"
+
+if [ "$filename" = "-" ]; then
+    filename="$__object/stdin"
 fi
 
-# setting no lines makes no sense
-test -s "${filename}" || exit 0
-
-state_is=$(cat "${__object:?}/explorer/state")
-
-if test "${state_is}" != 'present'
-then
-	cat <<-CODE
-	debconf-set-selections <<'EOF'
-	$(cat "${filename}")
-	EOF
-	CODE
-
-	awk '
-		{
-			printf "set %s %s %s %s\n", $1, $2, $3, $4
-		}' "${filename}" >>"${__messages_out:?}"
-fi
+echo "debconf-set-selections << __file-eof"
+cat "$filename"
+echo "__file-eof"

cdist/conf/type/__debconf_set_selections/man.rst

@@ -8,33 +8,15 @@ cdist-type__debconf_set_selections - Setup debconf selections
 
 DESCRIPTION
 -----------
-On Debian and alike systems :strong:`debconf-set-selections`\ (1) can be used
+On Debian and alike systems debconf-set-selections(1) can be used
 to setup configuration parameters.
 
 
 REQUIRED PARAMETERS
 -------------------
-cf. ``--line``.
-
-
-OPTIONAL PARAMETERS
--------------------
 file
-   Use the given filename as input for :strong:`debconf-set-selections`\ (1)
-   If filename is ``-``, read from stdin.
-
-   **This parameter is deprecated, because it doesn't work with state detection.**
-line
-   A line in :strong:`debconf-set-selections`\ (1) compatible format.
-   This parameter can be used multiple times to set multiple options.
-
-   (This parameter is actually required, but marked optional because the
-   deprecated ``--file`` is still accepted.)
-
-
-BOOLEAN PARAMETERS
-------------------
-None.
+   Use the given filename as input for debconf-set-selections(1)
+   If filename is "-", read from stdin.
 
 
 EXAMPLES
@@ -42,29 +24,30 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Setup gitolite's gituser
-    __debconf_set_selections nslcd --line 'gitolite gitolite/gituser string git'
+    # Setup configuration for nslcd
+    __debconf_set_selections nslcd --file /path/to/file
 
-    # Setup configuration for nslcd from a file.
-    # NB: Multiple lines can be passed to --line, although this can be considered a hack.
-    __debconf_set_selections nslcd --line "$(cat "${__files:?}/preseed/nslcd.debconf")"
+    # Setup configuration for nslcd from another type
+    __debconf_set_selections nslcd --file "$__type/files/preseed/nslcd"
+
+    __debconf_set_selections nslcd --file - << eof
+    gitolite gitolite/gituser string git
+    eof
 
 
 SEE ALSO
 --------
-- :strong:`cdist-type__update_alternatives`\ (7)
-- :strong:`debconf-set-selections`\ (1)
+:strong:`debconf-set-selections`\ (1), :strong:`cdist-type__update_alternatives`\ (7)
 
 
 AUTHORS
 -------
-| Nico Schottelius <nico-cdist--@--schottelius.org>
-| Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
+Nico Schottelius <nico-cdist--@--schottelius.org>
 
 
 COPYING
 -------
-Copyright \(C) 2011-2014 Nico Schottelius, 2021 Dennis Camera.
-You can redistribute it and/or modify it under the terms of the GNU General
-Public License as published by the Free Software Foundation, either version 3 of
-the License, or (at your option) any later version.
+Copyright \(C) 2011-2014 Nico Schottelius. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__debconf_set_selections/parameter/deprecated/file

@@ -1 +0,0 @@
-'file' has been deprecated in favour of 'line' in order to provide idempotency.

cdist/conf/type/__debconf_set_selections/parameter/optional_multiple

@@ -1 +0,0 @@
-line

cdist/conf/type/__filesystem/explorer/lsblk

@@ -27,7 +27,7 @@ else
 fi
 
 case "$os" in
-    alpine|centos|fedora|gentoo|redhat|suse|ubuntu)
+    alpine|centos|fedora|redhat|suse|gentoo)
         if [ ! -x "$(command -v lsblk)" ]; then
             echo "lsblk is required for __filesystem type" >&2
             exit 1

cdist/conf/type/__grafana_dashboard/manifest

@@ -15,7 +15,7 @@ case $os in
                 # Differntation not needed anymore
                 apt_source_distribution=stable
                 ;;
-            10*|11*)
+            10*)
                 # Differntation not needed anymore
                 apt_source_distribution=stable
                 ;;

cdist/conf/type/__letsencrypt_cert/manifest

@@ -41,7 +41,7 @@ if [ -z "${certbot_fullpath}" ]; then
 					require="__apt_source/stretch-backports" __package_apt certbot \
 						--target-release stretch-backports
 				;;
-				10*|11*)
+				10*)
 					__package_apt certbot
 				;;
 

cdist/conf/type/__package_apt/gencode-remote

@@ -81,24 +81,12 @@ aptget="DEBIAN_FRONTEND=noninteractive apt-get --quiet --yes -o Dpkg::Options::=
 
 case "$state_should" in
     present)
-        # There are special arguments to apt(8) to prevent aborts if apt woudn't been
-        # updated after the 19th April 2021 till the bullseye release. The additional
-        # arguments acknoledge the happend suite change (the apt(8) update does the
-        # same by itself).
-        #
-        # Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-        # allows backward compatablility to pre-buster Debian versions.
-        #
-        # See more: ticket #861
-        # https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-        apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
         # following is bit ugly, but important hack.
         # due to how cdist config run works, there isn't
         # currently better way to do it :(
         cat << EOF
 if [ ! -f /var/cache/apt/pkgcache.bin ] || [ "\$( stat --format %Y /var/cache/apt/pkgcache.bin )" -lt "\$( date +%s -d '-1 day' )" ]
-then echo apt-get $apt_opts update > /dev/null 2>&1 || true
+then echo apt-get update > /dev/null 2>&1 || true
 fi
 EOF
         if [ -n "$version" ]; then

cdist/conf/type/__package_pkg_freebsd/gencode-remote

@@ -37,7 +37,6 @@ assert ()                 #  If condition false,
 	then
 		echo "Assertion failed:  \"$1\""
 		# shellcheck disable=SC2039
-		# shellcheck disable=SC3044
 		echo "File \"$0\", line $lineno, called by $(caller 0)"
 		exit $E_ASSERT_FAILED
 	fi

cdist/conf/type/__package_update_index/gencode-remote

@@ -41,19 +41,7 @@ fi
 case "$type" in
     yum) ;;
     apt)
-        # There are special arguments to apt(8) to prevent aborts if apt woudn't been
-        # updated after the 19th April 2021 till the bullseye release. The additional
-        # arguments acknoledge the happend suite change (the apt(8) update does the
-        # same by itself).
-        #
-        # Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
-        # allows backward compatablility to pre-buster Debian versions.
-        #
-        # See more: ticket #861
-        # https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
-        apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
-
-        echo "apt-get --quiet $apt_opts update"
+        echo "apt-get --quiet update"
         echo "apt-cache updated (age was: $currage)" >> "$__messages_out"
         ;;
     pacman)

cdist/conf/type/__rsync/gencode-local

@@ -1,104 +1,39 @@
 #!/bin/sh -e
-
-if ! command -v rsync > /dev/null
-then
-    echo 'rsync is missing in local machine' >&2
-    exit 1
-fi
-
-src="$( cat "$__object/parameter/source" )"
-
-if [ ! -e "$src" ]
-then
-    echo "$src not found" >&2
-    exit 1
-fi
-
-if [ -f "$__object/parameter/destination" ]
-then
-    dst="$( cat "$__object/parameter/destination" )"
-else
-    dst="/$__object_id"
-fi
-
-# if source is directory, then make sure that
-# source and destination are ending with slash,
-# because this is what you almost always want when
-# rsyncing two directories.
-
-if [ -d "$src" ]
-then
-    if ! echo "$src" | grep -Eq '/$'
-    then
-        src="$src/"
-    fi
-
-    if ! echo "$dst" | grep -Eq '/$'
-    then
-        dst="$dst/"
-    fi
-fi
-
-remote_user="$( cat "$__object/parameter/remote-user" )"
-
-options="$( cat "$__object/parameter/options" )"
-
-if [ -f "$__object/parameter/option" ]
-then
-    while read -r l
-    do
-        # there's a limitation in argparse: value can't begin with '-'.
-        # to workaround this, let's prefix opts with '\' in manifest and remove here.
-        # read more about argparse issue: https://bugs.python.org/issue9334
-
-        options="$options $( echo "$l" | sed 's/\\//g' )"
-    done \
-        < "$__object/parameter/option"
-fi
-
-if [ -f "$__object/parameter/owner" ] || [ -f "$__object/parameter/group" ]
-then
-    options="$options --chown="
-
-    if [ -f "$__object/parameter/owner" ]
-    then
-        owner="$( cat "$__object/parameter/owner" )"
-        options="$options$owner"
-    fi
-
-    if [ -f "$__object/parameter/group" ]
-    then
-        group="$( cat "$__object/parameter/group" )"
-        options="$options:$group"
-    fi
-fi
-
-if [ -f "$__object/parameter/mode" ]
-then
-    mode="$( cat "$__object/parameter/mode" )"
-    options="$options --chmod=$mode"
-fi
-
-# IMPORTANT
 #
-# 1. we first dry-run rsync with change summary to find out
-#    if there are any changes and code generation is needed.
-# 2. normally, to get current state or target host, we run
-#    such operations in type explorers, but that's not
-#    possible due to how rsync works.
-# 3. redirecting output of dry-run to stderr to ease debugging.
-# 4. to understand how that cryptic regex works, please
-#    open rsync manpage and read about --itemize-changes.
+# 2015 Dominique Roux (dominique.roux4 at gmail.com)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
 
-export RSYNC_RSH="$__remote_exec"
+source=$(cat "$__object/parameter/source")
+remote_user=$(cat "$__object/parameter/remote-user")
 
-# shellcheck disable=SC2086
-if ! rsync --dry-run --itemize-changes $options "$src" "$remote_user@$__target_host:$dst" \
-    | grep -E '^(<|>|c|h|\.|\*)[fdL][cstTpogunbax\.\+\?]+\s' >&2
-then
-    exit 0
+if [ -f "$__object/parameter/destination" ]; then
+    destination=$(cat "$__object/parameter/destination")
+else
+    destination="/$__object_id"
 fi
 
-echo "export RSYNC_RSH='$__remote_exec'"
+set --
+if [ -f "$__object/parameter/rsync-opts" ]; then
+    while read -r opts; do
+        set -- "$@" "--$opts"
+    done < "$__object/parameter/rsync-opts"
+fi
 
-echo "rsync $options $src $remote_user@$__target_host:$dst"
+echo rsync -a \
+    --no-owner --no-group \
+    -q "$@" "${source}/" "${remote_user}@${__target_host}:${destination}"

cdist/conf/type/__rsync/gencode-remote

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 #
-# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
+# 2015 Dominique Roux (dominique.roux4 at gmail.com)
 #
 # This file is part of cdist.
 #
@@ -18,4 +18,20 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-__package_apt debconf
+if [ -f "$__object/parameter/destination" ]; then
+    destination=$(cat "$__object/parameter/destination")
+else
+    destination="/$__object_id"
+fi
+
+ownergroup=""
+if [ -f "$__object/parameter/owner" ]; then
+    ownergroup=$(cat "$__object/parameter/owner")
+fi
+if [ -f "$__object/parameter/group" ]; then
+    ownergroup="${ownergroup}:$(cat "$__object/parameter/group")"
+fi
+
+if [ "$ownergroup" ]; then
+    echo chown -R "$ownergroup" "$destination"
+fi

cdist/conf/type/__rsync/man.rst

@@ -3,73 +3,112 @@ cdist-type__rsync(7)
 
 NAME
 ----
-cdist-type__rsync - Mirror directories using ``rsync``
+cdist-type__rsync - Mirror directories using rsync
 
 
 DESCRIPTION
 -----------
-The purpose of this type is to bring power of ``rsync`` into ``cdist``.
+WARNING: This type is of BETA quality:
+
+- it has not been tested widely
+- interfaces *may* change
+- if there is a better approach to solve the problem -> the type may even vanish
+
+If you are fine with these constraints, please read on.
+
+
+This cdist type allows you to mirror local directories to the
+target host using rsync. Rsync will be installed in the manifest of the type.
+If group or owner are giveng, a recursive chown will be executed on the 
+target host.
+
+A slash will be appended to the source directory so that only the contents
+of the directory are taken and not the directory name itself.
 
 
 REQUIRED PARAMETERS
 -------------------
 source
-   Source directory in local machine.
-   If source is directory, slash (``/``) will be added to source and destination paths.
+    Where to take files from
 
 
 OPTIONAL PARAMETERS
 -------------------
-destination
-   Destination directory. Defaults to ``$__object_id``.
+group
+   Group to chgrp to.
 
 owner
-   Will be passed to ``rsync`` as ``--chown=OWNER``.
-   Read ``rsync(1)`` for more details.
+   User to chown to.
 
-group
-   Will be passed to ``rsync`` as ``--chown=:GROUP``.
-   Read ``rsync(1)`` for more details.
-
-mode
-   Will be passed to ``rsync`` as ``--chmod=MODE``.
-   Read ``rsync(1)`` for more details.
-
-options
-   Defaults to ``--recursive --links --perms --times``.
-   Due to `bug in Python's argparse<https://bugs.python.org/issue9334>`_, value must be prefixed with ``\``.
+destination
+    Use this as the base destination instead of the object id
 
 remote-user
-   Defaults to ``root``.
+    Use this user instead of the default "root" for rsync operations.
 
 
 OPTIONAL MULTIPLE PARAMETERS
 ----------------------------
-option
-   Pass additional options to ``rsync``.
-   See ``rsync(1)`` for all possible options.
-   Due to `bug in Python's argparse<https://bugs.python.org/issue9334>`_, value must be prefixed with ``\``.
+rsync-opts
+    Use this option to give rsync options with.
+    See rsync(1) for available options.
+    Only "--" options are supported.
+    Write the options without the beginning "--"
+    Can be specified multiple times.
+
+
+MESSAGES
+--------
+NONE
 
 
 EXAMPLES
 --------
+
 .. code-block:: sh
 
-    __rsync /var/www/example.com \
-        --owner root \
-        --group www-data \
-        --mode 'D750,F640' \
-        --source "$__files/example.com/www"
+    # You can use any source directory
+    __rsync /tmp/testdir \
+        --source /etc
+
+    # Use source from type
+    __rsync /etc \
+        --source "$__type/files/package"
+
+    # Allow multiple __rsync objects to write to the same dir
+    __rsync mystuff \
+        --destination /usr/local/bin \
+        --source "$__type/files/package"
+
+    __rsync otherstuff \
+        --destination /usr/local/bin \
+        --source "$__type/files/package2"
+
+    # Use rsync option --exclude
+    __rsync /tmp/testdir \
+        --source /etc \
+        --rsync-opts exclude=sshd_conf
+
+    # Use rsync with multiple options --exclude --dry-run
+    __rsync /tmp/testing \
+        --source /home/tester \
+        --rsync-opts exclude=id_rsa \
+        --rsync-opts dry-run
+
+
+SEE ALSO
+--------
+:strong:`rsync`\ (1)
 
 
 AUTHORS
 -------
-Ander Punnar <ander-at-kvlt-dot-ee>
+Nico Schottelius <nico-cdist--@--schottelius.org>
 
 
 COPYING
 -------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.
+Copyright \(C) 2015 Nico Schottelius. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__rsync/manifest

@@ -1,3 +1,21 @@
 #!/bin/sh -e
+#
+# 2015 Dominique Roux (dominique.roux4 at gmail.com)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
 
 __package rsync

cdist/conf/type/__rsync/parameter/default/options

@@ -1 +0,0 @@
---recursive --links --perms --times

cdist/conf/type/__rsync/parameter/optional

@@ -1,6 +1,4 @@
 destination
-group
-mode
-options
 owner
+group
 remote-user

cdist/conf/type/__rsync/parameter/optional_multiple

@@ -1 +1 @@
-option
+rsync-opts

cdist/conf/type/__sed/explorer/file

@@ -1,16 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/file" ]
-then
-    file="$( cat "$__object/parameter/file" )"
-else
-    file="/$__object_id"
-fi
-
-if [ ! -e "$file" ]
-then
-    echo "$file does not exist" >&2
-    exit 1
-fi
-
-cat "$file"

cdist/conf/type/__sed/gencode-remote

@@ -1,58 +0,0 @@
-#!/bin/sh -e
-
-if [ -f "$__object/parameter/file" ]
-then
-    file="$( cat "$__object/parameter/file" )"
-else
-    file="/$__object_id"
-fi
-
-script="$( cat "$__object/parameter/script" )"
-
-if [ "$script" = '-' ]
-then
-    script="$( cat "$__object/stdin" )"
-fi
-
-# since stdin is not available in explorer, we pull file from target with explorer
-
-file_from_target="$__object/explorer/file"
-
-sed_cmd='sed'
-
-if [ -f "$__object/parameter/regexp-extended" ]
-then
-    sed_cmd="$sed_cmd -E"
-fi
-
-# do sed dry run, diff result and if no change, then there's nothing to do
-# also redirect diff's output to stderr for debugging purposes
-
-if echo "$script" | "$sed_cmd" -f - "$file_from_target" | diff -u "$file_from_target" - >&2
-then
-    exit 0
-fi
-
-# we can't use -i, because it's not posix, so we fly with tempfile and cp
-# and we use cp because we want to preserve destination file's attributes
-
-# shellcheck disable=SC2016
-echo 'tmp="$__object/tempfile"'
-
-echo "$sed_cmd -f - '$file' > \"\$tmp\" << EOF"
-
-echo "$script"
-
-echo 'EOF'
-
-echo "cp \"\$tmp\" '$file'"
-
-# shellcheck disable=SC2016
-echo 'rm -f "$tmp"'
-
-echo 'change' >> "$__messages_out"
-
-if [ -f "$__object/parameter/onchange" ]
-then
-    cat "$__object/parameter/onchange"
-fi

cdist/conf/type/__sed/man.rst

@@ -1,57 +0,0 @@
-cdist-type__sed(7)
-==================
-
-NAME
-----
-cdist-type__sed - Transform text files with ``sed``
-
-
-DESCRIPTION
------------
-Transform text files with ``sed``.
-
-
-REQUIRED MULTIPLE PARAMETERS
-----------------------------
-script
-   ``sed`` script.
-   If ``-`` then the script is read from ``stdin``.
-
-
-OPTIONAL PARAMETERS
--------------------
-file
-   Path to the file. Defaults to ``$__object_id``.
-
-onchange
-   Execute this command if ``sed`` changes file.
-
-
-BOOLEAN PARAMETERS
-------------------
-regexp-extended
-   Use extended regular expressions in the script.
-   Might not be supported with every ``sed`` version.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-   __sed /tmp/foobar --script 's/foo/bar/'
-
-   echo 's/foo/bar/' | __sed foobar --file /tmp/foobar --script -
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.

cdist/conf/type/__sed/parameter/boolean

@@ -1 +0,0 @@
-regexp-extended

cdist/conf/type/__sed/parameter/optional

@@ -1,2 +0,0 @@
-file
-onchange

cdist/conf/type/__sed/parameter/required_multiple

@@ -1 +0,0 @@
-script

cdist/conf/type/__snakeoil_cert/explorer/ssl-cert-group

@@ -1,8 +0,0 @@
-#!/bin/sh -e
-
-if grep -Eq '^ssl-cert:' /etc/group
-then
-    echo 'present'
-else
-    echo 'absent'
-fi

cdist/conf/type/__snakeoil_cert/explorer/state

@@ -1,24 +0,0 @@
-#!/bin/sh -e
-
-key_path="$( cat "$__object/parameter/key-path" )"
-
-if echo "$key_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    key_path="$( printf "$key_path" "$__object_id" )"
-fi
-
-cert_path="$( cat "$__object/parameter/cert-path" )"
-
-if echo "$cert_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    cert_path="$( printf "$cert_path" "$__object_id" )"
-fi
-
-if [ ! -f "$key_path" ] || [ ! -f "$cert_path" ]
-then
-    echo 'absent'
-else
-    echo 'present'
-fi

cdist/conf/type/__snakeoil_cert/gencode-remote

@@ -1,73 +0,0 @@
-#!/bin/sh -e
-
-state="$( cat "$__object/explorer/state" )"
-
-if [ "$state" = 'present' ]
-then
-    exit 0
-fi
-
-if [ -f "$__object/parameter/common-name" ]
-then
-    common_name="$( cat "$__object/parameter/common-name" )"
-else
-    common_name="$__object_id"
-fi
-
-key_path="$( cat "$__object/parameter/key-path" )"
-
-if echo "$key_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    key_path="$( printf "$key_path" "$__object_id" )"
-fi
-
-cert_path="$( cat "$__object/parameter/cert-path" )"
-
-if echo "$cert_path" | grep -Fq '%s'
-then
-    # shellcheck disable=SC2059
-    cert_path="$( printf "$cert_path" "$__object_id" )"
-fi
-
-key_type="$( cat "$__object/parameter/key-type" )"
-
-key_type_arg="$( echo "$key_type" | cut -d : -f 2 )"
-
-case "$key_type" in
-    rsa:*)
-        echo "openssl genrsa -out '$key_path' $key_type_arg"
-    ;;
-    ec:*)
-        echo "openssl ecparam -name $key_type_arg -genkey -noout -out '$key_path'"
-    ;;
-esac
-
-# shellcheck disable=SC2016
-echo 'csr_path="$( mktemp )"'
-
-echo "openssl req -new -subj '/CN=$common_name' -key '$key_path' -out \"\$csr_path\""
-
-echo "openssl x509 -req -sha256 -days 3650 -in \"\$csr_path\" -signkey '$key_path' -out '$cert_path'"
-
-# shellcheck disable=SC2016
-echo 'rm -f "$csr_path"'
-
-if [ "$( cat "$__object/explorer/ssl-cert-group" )" = 'present' ]
-then
-    key_group='ssl-cert'
-else
-    key_group='root'
-fi
-
-echo "chmod 640 '$key_path'"
-
-echo "chown root '$key_path'"
-
-echo "chgrp $key_group '$key_path'"
-
-echo "chmod 644 '$cert_path'"
-
-echo "chown root '$cert_path'"
-
-echo "chgrp root '$cert_path'"

cdist/conf/type/__snakeoil_cert/man.rst

@@ -1,61 +0,0 @@
-cdist-type__snakeoil_cert(7)
-============================
-
-NAME
-----
-cdist-type__snakeoil_cert - Generate self-signed certificate
-
-
-DESCRIPTION
------------
-The purpose of this type is to generate **self-signed** certificate and private key
-for **testing purposes**. Certificate will expire in 3650 days.
-
-Certificate's and key's access bits will be ``644`` and ``640`` respectively.
-If target system has ``ssl-cert`` group, then it will be used as key's group.
-Use ``require='__snakeoil_cert/...' __file ...`` to override.
-
-
-OPTIONAL PARAMETERS
--------------------
-common-name
-   Defaults to ``$__object_id``.
-
-key-path
-   ``%s`` in path will be replaced with ``$__object_id``.
-   Defaults to ``/etc/ssl/private/%s.pem``.
-
-key-type
-   Possible values are ``rsa:$bits`` and ``ec:$name``.
-   For possible EC names see ``openssl ecparam -list_curves``.
-   Defaults to ``rsa:2048``.
-
-cert-path
-   ``%s`` in path will be replaced with ``$__object_id``.
-   Defaults to ``/etc/ssl/certs/%s.pem``.
-
-
-EXAMPLES
---------
-.. code-block:: sh
-
-	__snakeoil_cert localhost-rsa \
-	    --common-name localhost \
-	    --key-type rsa:4096
-
-	__snakeoil_cert localhost-ec \
-	    --common-name localhost \
-	    --key-type ec:prime256v1
-
-
-AUTHORS
--------
-Ander Punnar <ander-at-kvlt-dot-ee>
-
-
-COPYING
--------
-Copyright \(C) 2021 Ander Punnar. You can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation, either version 3 of the License, or (at your option)
-any later version.

cdist/conf/type/__snakeoil_cert/parameter/default/cert-path

@@ -1 +0,0 @@
-/etc/ssl/certs/%s.pem

cdist/conf/type/__snakeoil_cert/parameter/default/key-path

@@ -1 +0,0 @@
-/etc/ssl/private/%s.pem

cdist/conf/type/__snakeoil_cert/parameter/default/key-type

@@ -1 +0,0 @@
-rsa:2048

cdist/conf/type/__snakeoil_cert/parameter/optional

@@ -1,4 +0,0 @@
-common-name
-key-path
-key-type
-cert-path

cdist/conf/type/__ssh_authorized_keys/explorer/keys

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 
 # shellcheck disable=SC1090
-# shellcheck disable=SC1091
 file="$( . "$__type_explorer/file" )"
 
 if [ -f "$file" ]

cdist/conf/type/__update_alternatives/explorer/alternatives

@@ -1,4 +1,4 @@
 #!/bin/sh -e
 
-LC_ALL=C update-alternatives --display "${__object_id:?}" 2>/dev/null \
-| awk -F ' - ' '/priority [0-9]+$/ { print $1 }'
+update-alternatives --display "$__object_id" 2>/dev/null \
+    | awk -F ' - ' '/priority [0-9]+$/ { print $1 }'

cdist/conf/type/__update_alternatives/explorer/link

@@ -18,12 +18,12 @@ for altdir in \
     /var/lib/dpkg/alternatives \
     /var/lib/alternatives
 do
-    if [ ! -f "$altdir/${__object_id:?}" ]
+    if [ ! -f "$altdir/$__object_id" ]
     then
         continue
     fi
 
-    link="$( awk 'NR==2' "$altdir/${__object_id:?}" )"
+    link="$( awk 'NR==2' "$altdir/$__object_id" )"
 
     if [ -n "$link" ]
     then
@@ -31,12 +31,9 @@ do
     fi
 done
 
-if [ -z "$link" ] && [ -z "${__cdist_dry_run+dry run}" ]
+if [ -z "$link" ]
 then
-    # NOTE: ignore error for dry-runs because a package providing the link
-    #       might be managed by another cdist object (which wasn't executed,
-    #       because dry run…).
-    echo "unable to get link for ${__object_id:?}" >&2
+    echo "unable to get link for $__object_id" >&2
     exit 1
 fi
 

cdist/conf/type/__update_alternatives/explorer/path_is

@@ -1,15 +1,11 @@
 #!/bin/sh -e
 
-path_is=$(
-    LC_ALL=C update-alternatives --display "${__object_id?}" 2>/dev/null \
-    | awk '/link currently points to/ { print $5 }')
+path_is="$( update-alternatives --display "$__object_id" 2>/dev/null \
+    | awk '/link currently points to/ {print $5}' )"
 
-if [ -z "$path_is" ] && [ -z "${__cdist_dry_run+dry run}" ]
+if [ -z "$path_is" ]
 then
-    # NOTE: ignore error for dry-runs because a package providing the
-    #       alternative might be managed by another cdist object (which
-    #       wasn't executed, because dry run…).
-    echo "unable to get current path for ${__object_id:?}" >&2
+    echo "unable to get current path for $__object_id" >&2
     exit 1
 fi
 

cdist/conf/type/__update_alternatives/explorer/path_should_state

@@ -1,6 +1,6 @@
 #!/bin/sh -e
 
-if [ -f "$( cat "${__object:?}/parameter/path" )" ]
+if [ -f "$( cat "$__object/parameter/path" )" ]
 then
     echo 'present'
 else

cdist/conf/type/__update_alternatives/gencode-remote

@@ -18,39 +18,37 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 
-path_is="$( cat "${__object:?}/explorer/path_is" )"
+path_is="$( cat "$__object/explorer/path_is" )"
 
-path_should="$( cat "${__object:?}/parameter/path" )"
+path_should="$( cat "$__object/parameter/path" )"
 
 if [ "$path_is" = "$path_should" ]
 then
     exit 0
 fi
 
-if [ "$( cat "${__object:?}/explorer/path_should_state" )" = 'absent' ] \
-    && [ -z "${__cdist_dry_run+dry run}" ]
+if [ "$( cat "$__object/explorer/path_should_state" )" = 'absent' ] && [ -z "$__cdist_dry_run" ]
 then
     echo "$path_should does not exist in target" >&2
     exit 1
 fi
 
-name=${__object_id:?}
+name="$__object_id"
 
-if ! grep -Fxq "$path_should" "${__object:?}/explorer/alternatives"
+alternatives="$( cat "$__object/explorer/alternatives" )"
+
+if ! echo "$alternatives" | grep -Fxq "$path_should"
 then
-    if [ -f "${__object:?}/parameter/install" ]
+    if [ ! -f "$__object/parameter/install" ]
     then
-        link="$( cat "${__object:?}/explorer/link" )"
-        echo "update-alternatives --install '$link' '$name' '$path_should' 1000"
-    elif [ -z "${__cdist_dry_run+dry run}" ]
-    then
-        # NOTE: ignore error for dry-runs because a package providing the link
-        #       to be installed might be managed by another cdist object (which
-        #       wasn't executed, because dry run…).
         echo "$path_should is not in $name alternatives." >&2
         echo 'Please install missing packages or use --install to add path to alternatives.' >&2
         exit 1
     fi
+
+    link="$( cat "$__object/explorer/link" )"
+
+    echo "update-alternatives --install '$link' '$name' '$path_should' 1000"
 fi
 
 echo "update-alternatives --set '$name' '$path_should'"

cdist/log.py

@@ -36,27 +36,25 @@ import threading
 logging.OFF = logging.CRITICAL + 10  # disable logging
 logging.addLevelName(logging.OFF, 'OFF')
 
-
 logging.VERBOSE = logging.INFO - 5
 logging.addLevelName(logging.VERBOSE, 'VERBOSE')
 
 
-def _verbose(self, msg, *args, **kwargs):
-    self.log(logging.VERBOSE, msg, args, **kwargs)
+def _verbose(msg, *args, **kwargs):
+    logging.log(logging.VERBOSE, msg, *args, **kwargs)
 
 
-logging.Logger.verbose = _verbose
-
+logging.verbose = _verbose
 
 logging.TRACE = logging.DEBUG - 5
 logging.addLevelName(logging.TRACE, 'TRACE')
 
 
-def _trace(self, msg, *args, **kwargs):
-    self.log(logging.TRACE, msg, *args, **kwargs)
+def _trace(msg, *args, **kwargs):
+    logging.log(logging.TRACE, msg, *args, **kwargs)
 
 
-logging.Logger.trace = _trace
+logging.trace = _trace
 
 
 class CdistFormatter(logging.Formatter):

cdist/scan/commandline.py

@@ -20,98 +20,36 @@
 #
 
 import logging
-import sys
-from datetime import datetime
 
 log = logging.getLogger("scan")
 
 
-def run(scan, args):
-    # We run each component in a separate process since they
-    # must not block on each other.
+# define this outside of the class to not handle scapy import errors by default
+def commandline(args):
+    log.debug(args)
+
+    try:
+        import cdist.scan.scan as scan
+    except ModuleNotFoundError:
+        print('cdist scan requires scapy to be installed')
+
     processes = []
 
+    if not args.mode:
+        # By default scan and trigger, but do not call any action
+        args.mode = ['scan', 'trigger', ]
+
     if 'trigger' in args.mode:
-        t = scan.Trigger(interfaces=args.interface,
-                         sleeptime=args.trigger_delay)
+        t = scan.Trigger(interfaces=args.interfaces)
         t.start()
         processes.append(t)
         log.debug("Trigger started")
 
     if 'scan' in args.mode:
-        s = scan.Scanner(
-                autoconfigure='config' in args.mode,
-                interfaces=args.interface,
-                name_mapper=args.name_mapper)
+        s = scan.Scanner(interfaces=args.interfaces, args=args)
         s.start()
         processes.append(s)
         log.debug("Scanner started")
 
     for process in processes:
         process.join()
-
-
-def list(scan, args):
-    s = scan.Scanner(interfaces=args.interface, name_mapper=args.name_mapper)
-    hosts = s.list()
-
-    # A full IPv6 addresses id composed of 8 blocks of 4 hexa chars +
-    # 6 colons.
-    ipv6_max_size = 8 * 4 + 10
-    date_max_size = len(datetime.now().strftime(scan.datetime_format))
-    name_max_size = 25
-
-    print("{} | {} | {} | {}".format(
-        'name'.ljust(name_max_size),
-        'address'.ljust(ipv6_max_size),
-        'last seen'.ljust(date_max_size),
-        'last configured'.ljust(date_max_size)))
-    print('=' * (name_max_size + 3 + ipv6_max_size + 2 * (3 + date_max_size)))
-    for host in hosts:
-        last_seen = host.last_seen()
-        if last_seen:
-            last_seen = last_seen.strftime(scan.datetime_format)
-        else:
-            last_seen = '-'
-
-        last_configured = host.last_configured()
-        if last_configured is not None:
-            last_configured = last_configured.strftime(scan.datetime_format)
-        else:
-            last_configured = '-'
-
-        print("{} | {} | {} | {}".format(
-            host.name(default='-').ljust(name_max_size),
-            host.address().ljust(ipv6_max_size),
-            last_seen.ljust(date_max_size),
-            last_configured.ljust(date_max_size)))
-
-
-# CLI processing is defined outside of the main scan class to handle
-# non-available optional scapy dependency (instead of crashing mid-flight).
-def commandline(args):
-    log.debug(args)
-
-    # Check if we have the optional scapy dependency available.
-    try:
-        import cdist.scan.scan as scan
-    except ModuleNotFoundError:
-        log.error('cdist scan requires scapy to be installed. Exiting.')
-        sys.exit(1)
-
-    # Set default operation mode.
-    if not args.mode:
-        # By default scan and trigger, but do not call any action.
-        args.mode = ['scan', 'trigger', ]
-
-    if 'config' in args.mode and args.name_mapper is None:
-        print('--name-mapper must be specified for scanner config mode.',
-              file=sys.stderr)
-        sys.exit(1)
-
-    # Print known hosts and exit is --list is specified - do not start
-    # the scanner.
-    if args.list:
-        list(scan, args)
-    else:
-        run(scan, args)

cdist/scan/scan.py

@@ -19,6 +19,38 @@
 #
 #
 
+#
+# Interface to be implemented:
+# - cdist scan --mode {scan, trigger, install, config}, --mode can be repeated
+#   scan: scan / listen for icmp6 replies
+#   trigger: send trigger to multicast
+#   config: configure newly detected hosts
+#   install: install newly detected hosts
+#
+# Scanner logic
+#  - save results to configdir:
+#     basedir = ~/.cdist/scan/<ipv6-address>
+#     last_seen = ~/.cdist/scan/<ipv6-address>/last_seen -- record unix time
+#           or similar
+#     last_configured = ~/.cdist/scan/<ipv6-address>/last_configured -- record
+#           unix time or similar
+#     last_installed = ~/.cdist/scan/<ipv6-address>/last_configured -- record
+#           unix time or similar
+#
+#
+#
+#
+# cdist scan --list
+#       Show all known hosts including last seen flag
+#
+# Logic for reconfiguration:
+#
+#  - record when configured last time
+#  - introduce a parameter --reconfigure-after that takes time argument
+#  - reconfigure if a) host alive and b) reconfigure-after time passed
+#
+
+
 from multiprocessing import Process
 import os
 import logging
@@ -29,84 +61,7 @@ import datetime
 
 import cdist.config
 
-logging.basicConfig(level=logging.DEBUG)
 log = logging.getLogger("scan")
-datetime_format = '%Y-%m-%d %H:%M:%S'
-
-
-class Host(object):
-    def __init__(self, addr, outdir, name_mapper=None):
-        self.addr = addr
-        self.workdir = os.path.join(outdir, addr)
-        self.name_mapper = name_mapper
-
-        os.makedirs(self.workdir, exist_ok=True)
-
-    def __get(self, key, default=None):
-        fname = os.path.join(self.workdir, key)
-        value = default
-        if os.path.isfile(fname):
-            with open(fname, "r") as fd:
-                value = fd.readline()
-        return value
-
-    def __set(self, key, value):
-        fname = os.path.join(self.workdir, key)
-        with open(fname, "w") as fd:
-            fd.write(f"{value}")
-
-    def name(self, default=None):
-        if self.name_mapper is None:
-            return default
-
-        fpath = os.path.join(os.getcwd(), self.name_mapper)
-        if os.path.isfile(fpath) and os.access(fpath, os.X_OK):
-            out = subprocess.run([fpath, self.addr], capture_output=True)
-            if out.returncode != 0:
-                return default
-            else:
-                value = out.stdout.decode()
-                return (default if len(value) == 0 else value)
-        else:
-            return default
-
-    def address(self):
-        return self.addr
-
-    def last_seen(self, default=None):
-        raw = self.__get('last_seen')
-        if raw:
-            return datetime.datetime.strptime(raw, datetime_format)
-        else:
-            return default
-
-    def last_configured(self, default=None):
-        raw = self.__get('last_configured')
-        if raw:
-            return datetime.datetime.strptime(raw, datetime_format)
-        else:
-            return default
-
-    def seen(self):
-        now = datetime.datetime.now().strftime(datetime_format)
-        self.__set('last_seen', now)
-
-    # XXX: There's no easy way to use the config module without feeding it with
-    # CLI args. Might as well call everything from scratch!
-    def configure(self):
-        target = self.name() or self.address()
-        cmd = ['cdist', 'config', '-v', target]
-
-        fname = os.path.join(self.workdir, 'last_configuration_log')
-        with open(fname, "w") as fd:
-            log.debug("Executing: %s", cmd)
-            completed_process = subprocess.run(cmd, stdout=fd, stderr=fd)
-            if completed_process.returncode != 0:
-                log.error("%s return with non-zero code %i - see %s for \
-                        details.", cmd, completed_process.returncode, fname)
-
-        now = datetime.datetime.now().strftime(datetime_format)
-        self.__set('last_configured', now)
 
 
 class Trigger(object):
@@ -114,14 +69,12 @@ class Trigger(object):
     Trigger an ICMPv6EchoReply from all hosts that are alive
     """
 
-    def __init__(self, interfaces, sleeptime, verbose=False):
+    def __init__(self, interfaces=None, verbose=False):
         self.interfaces = interfaces
-
-        # Used by scapy / send in trigger/2.
         self.verbose = verbose
 
-        # Delay in seconds between sent ICMPv6EchoRequests.
-        self.sleeptime = sleeptime
+        # Wait 5 seconds before triggering again - FIXME: add parameter
+        self.sleeptime = 5
 
     def start(self):
         self.processes = []
@@ -140,14 +93,9 @@ class Trigger(object):
             time.sleep(self.sleeptime)
 
     def trigger(self, interface):
-        try:
-            log.debug("Sending ICMPv6EchoRequest on %s", interface)
-            packet = IPv6(
-                    dst="ff02::1%{}".format(interface)
-                    ) / ICMPv6EchoRequest()
-            send(packet, verbose=self.verbose)
-        except Exception as e:
-            log.error("Could not send ICMPv6EchoRequest: %s", e)
+        packet = IPv6(dst="ff02::1{}".format(interface)) / ICMPv6EchoRequest()
+        log.debug("Sending request on %s", interface)
+        send(packet, verbose=self.verbose)
 
 
 class Scanner(object):
@@ -155,62 +103,41 @@ class Scanner(object):
     Scan for replies of hosts, maintain the up-to-date database
     """
 
-    def __init__(self, interfaces, autoconfigure=False, outdir=None,
-                 name_mapper=None):
+    def __init__(self, interfaces=None, args=None, outdir=None):
         self.interfaces = interfaces
-        self.autoconfigure = autoconfigure
-        self.name_mapper = name_mapper
-        self.config_delay = datetime.timedelta(seconds=3600)
 
         if outdir:
             self.outdir = outdir
         else:
             self.outdir = os.path.join(os.environ['HOME'], '.cdist', 'scan')
-        os.makedirs(self.outdir, exist_ok=True)
-
-        self.running_configs = {}
 
     def handle_pkg(self, pkg):
         if ICMPv6EchoReply in pkg:
-            host = Host(pkg['IPv6'].src, self.outdir, self.name_mapper)
-            if host.name():
-                log.verbose("Host %s (%s) is alive", host.name(),
-                            host.address())
-            else:
-                log.verbose("Host %s is alive", host.address())
+            host = pkg['IPv6'].src
+            log.verbose("Host %s is alive", host)
 
-            host.seen()
+            dir = os.path.join(self.outdir, host)
+            fname = os.path.join(dir, "last_seen")
 
-            # Configure if needed.
-            if self.autoconfigure and \
-                    host.last_configured(default=datetime.datetime.min) + \
-                    self.config_delay < datetime.datetime.now():
-                self.config(host)
+            now = datetime.datetime.now()
 
-    def list(self):
-        hosts = []
-        for addr in os.listdir(self.outdir):
-            hosts.append(Host(addr, self.outdir, self.name_mapper))
+            os.makedirs(dir, exist_ok=True)
 
-        return hosts
+            # FIXME: maybe adjust the format so we can easily parse again
+            with open(fname, "w") as fd:
+                fd.write(f"{now}\n")
 
-    def config(self, host):
-        if host.name() is None:
-            log.debug("config - could not resolve name for %s, aborting.",
-                      host.address())
-            return
+    def config(self):
+        """
+        Configure a host
 
-        previous_config_process = self.running_configs.get(host.name())
-        if previous_config_process is not None and \
-                previous_config_process.is_alive():
-            log.debug("config - is already running for %s, aborting.",
-                      host.name())
+        - Assume we are only called if necessary
+        - However we need to ensure to not run in parallel
+        - Maybe keep dict storing per host processes
+        - Save the result
+        - Save the output -> probably aligned to config mode
 
-        log.info("config - running against host %s (%s).", host.name(),
-                 host.address())
-        p = Process(target=host.configure())
-        p.start()
-        self.running_configs[host.name()] = p
+        """
 
     def start(self):
         self.process = Process(target=self.scan)
@@ -221,9 +148,47 @@ class Scanner(object):
 
     def scan(self):
         log.debug("Scanning - zzzzz")
-        try:
-            sniff(iface=self.interfaces,
-                  filter="icmp6",
-                  prn=self.handle_pkg)
-        except Exception as e:
-            log.error("Could not start listener: %s", e)
+        sniff(iface=self.interfaces,
+              filter="icmp6",
+              prn=self.handle_pkg)
+
+
+if __name__ == '__main__':
+    t = Trigger(interfaces=["wlan0"])
+    t.start()
+
+    # Scanner can listen on many interfaces at the same time
+    s = Scanner(interfaces=["wlan0"])
+    s.scan()
+
+    # Join back the trigger processes
+    t.join()
+
+    # Test in my lan shows:
+    # [18:48] bridge:cdist% ls -1d fe80::*
+    # fe80::142d:f0a5:725b:1103
+    # fe80::20d:b9ff:fe49:ac11
+    # fe80::20d:b9ff:fe4c:547d
+    # fe80::219:d2ff:feb2:2e12
+    # fe80::21b:fcff:feee:f446
+    # fe80::21b:fcff:feee:f45c
+    # fe80::21b:fcff:feee:f4b1
+    # fe80::21b:fcff:feee:f4ba
+    # fe80::21b:fcff:feee:f4bc
+    # fe80::21b:fcff:feee:f4c1
+    # fe80::21d:72ff:fe86:46b
+    # fe80::42b0:34ff:fe6f:f6f0
+    # fe80::42b0:34ff:fe6f:f863
+    # fe80::42b0:34ff:fe6f:f9b2
+    # fe80::4a5d:60ff:fea1:e55f
+    # fe80::77a3:5e3f:82cc:f2e5
+    # fe80::9e93:4eff:fe6c:c1f4
+    # fe80::ba69:f4ff:fec5:6041
+    # fe80::ba69:f4ff:fec5:8db7
+    # fe80::bad8:12ff:fe65:313d
+    # fe80::bad8:12ff:fe65:d9b1
+    # fe80::ce2d:e0ff:fed4:2611
+    # fe80::ce32:e5ff:fe79:7ea7
+    # fe80::d66d:6dff:fe33:e00
+    # fe80::e2ff:f7ff:fe00:20e6
+    # fe80::f29f:c2ff:fe7c:275e

docs/changelog

@@ -2,29 +2,6 @@ Changelog
 ---------
 
 next:
-	* Explorer machine_type: Rewrite (Dennis Camera)
-	* New type: __sed (Ander Punnar)
-	* Type __apt_update_index: Fix complaint about suite change (Matthias Stecher)
-	* Type __package_update_index: Fix complaint about suite change (Matthias Stecher)
-	* Type __apt_source: Fix complaint about suite change (Matthias Stecher)
-	* Type __package_apt: Fix complaint about suite change (Matthias Stecher)
-	* Type __debconf_set_selections: Fix bug where --file was unsupported (Evilham)
-	* Types __letsencrypt_cert, __grafana_dashboard: Improve bullseye support (Evilham)
-
-6.9.8: 2021-08-24
-	* Type __rsync: Rewrite (Ander Punnar)
-	* New type: __apt_pin (Daniel Fancsali)
-	* Explorer os_version: Convert Devuan ceres to version number (Dennis Camera)
-	* Core: Fix logging bug (Dennis Camera)
-	* Build: Improve Makefile compatibility (Evilham)
-	* Type __filesystem: Support ubuntu (Joachim Desroches)
-	* Explorer os_version: Fall back to os-release/lsb-release file on Ubuntu (Dennis Camera)
-	* Explorer memory: Fix conversion of large numbers (>= 2GiB) (Dennis Camera)
-	* Type __update_alternatives: Fix dry run and non-English systems (Dennis Camera)
-	* Explorer os_version: Fix for FreeBSD < 10.0 and for legacy Mac OS X versions (Dennis Camera)
-	* Explorer os_version: Add bookworm and trixie debian code names, fallback to 99.99 for unknown code name in sid (Ander Punnar)
-
-6.9.7: 2021-07-10
 	* New type: __postgres_conf (Beni Ruef, Dennis Camera)
 	* Types __postgres_*: Improve OS support and do some cleanup (Dennis Camera)
 	* Type __apt_key_uri: Deprecate in favour of __apt_key --uri (Evilham)
@@ -32,11 +9,6 @@ next:
 	* Type __letsencrypt_cert: Bugfix, performance; revamp explorers, add locking (Evilham)
 	* Type __git: Fix group explorer (Ander Punnar)
 	* Type __pyvenv: Fix group explorer (Dennis Camera)
-	* Type __download: Improve checksum verification, add optional --destination (Ander Punnar)
-	* Type __debconf_set_selections: Add state explorer (Dennis Camera)
-	* Core: Implement usable cdist scan (Timothée Floure)
-	* New type: __snakeoil_cert (Ander Punnar)
-	* Type __rsync: Honour $__remote_exec env var (Daniel Fancsali)
 
 6.9.6: 2021-04-20
 	* Type __pyvenv: Fix user example in man page (Dennis Camera)
@@ -165,7 +137,7 @@ next:
 	* Type __pf_ruleset: Refactor (Kamila Součková, Evil Ham)
 	* Type __pf_apply: Deprecate type (Kamila Součková, Evil Ham)
 	* Configuration: Add notes to cdist.cfg.skeleton (Evil Ham)
-	* Explorers cpu_cores, memory: Improve BSD support (Evil Ham)
+	* Explorers cpu_cores, memory: Improve *BSD support (Evil Ham)
 	* Core: Remove debug logging noise (Evil Ham)
 
 6.5.4: 2020-04-11
@@ -230,7 +202,7 @@ next:
 	* Documentation: PreOS english nitpicking (Evil Ham)
 	* Documentation: Add installing from source with signature verification (Darko Poljak)
 	* Core: preos: Support top command logging options, custom conf-dir option and CDIST_PATH env var (Darko Poljak)
-	* Type __start_on_boot: Docs: remove unsupported BSD claim (Evil Ham)
+	* Type __start_on_boot: Docs: remove unsupported *BSD claim (Evil Ham)
 	* New type: __openldap_server (Evil Ham)
 
 6.2.0: 2019-11-30
@@ -1089,9 +1061,9 @@ next:
 	* Removed type __removeline (replaced by __line) (Nico Schottelius)
 	* Type __directory: Parameter --parents and --recursive are now boolean (Nico Schottelius)
 	* Type __package_apt, __package_luarocks, __package_opkg,
-	  __package_pacman, __package_pkg_freebsd, __package_pkg_openbsd,
-	  __package_rubygem, __package_yum, __process:
-	  Parameter state accepts only "present" and "absent" (Nico Schottelius)
+		__package_pacman, __package_pkg_freebsd, __package_pkg_openbsd,
+		__package_rubygem, __package_yum, __process:
+			Parameter state accepts only "present" and "absent" (Nico Schottelius)
 	* Dist: Initial support for pypi packaging (Nico Schottelius)
 
 2.0.15: 2012-11-02

docs/src/cdist-install.rst

@@ -12,7 +12,7 @@ This is the machine from which you will configure target hosts.
  * /bin/sh: A POSIX like shell (for instance bash, dash, zsh)
  * Python >= 3.5
  * SSH client
- * sphinx with the rtd theme (for building html docs and/or the man pages)
+ * sphinx (for building html docs and/or the man pages)
 
 Target Hosts
 ~~~~~~~~~~~~

docs/src/cdist-scan.rst

@@ -1,84 +0,0 @@
-Scan
-=====
-
-Description
------------
-Runs cdist as a daemon that discover/watch on hosts and reconfigure them
-periodically. It is especially useful in netboot-based environment where hosts
-boot unconfigured, and to ensure your infrastructure stays in sync with your
-configuration.
-
-This feature is still consider to be in **beta** stage, and only operate on
-IPv6 (including link-local).
-
-Usage (Examples)
-----------------
-
-Discover hosts on local network and configure those whose name is resolved by
-the name mapper script.
-
-.. code-block:: sh
-
-    $ cdist scan --beta --interface eth0 \
-      --mode scan --name-mapper path/to/script \
-      --mode trigger --mode config
-
-List known hosts and exit.
-
-.. code-block:: sh
-
-    $ cdist scan --beta --list --name-mapper path/to/script
-
-Please refer to `cdist(1)` for a detailed list of parameters.
-
-Modes
------
-
-The scanner has 3 modes that can be independently toggled. If the `--mode`
-parameter is not specified, only `tigger` and `scan` are enabled (= hosts are
-not configured).
-
-trigger
-  Send ICMPv6 requests to specific hosts or broadcast over IPv6 link-local to
-  trigger detection by the `scan` module.
-
-scan
-  Watch for incoming ICMPv6 replies and optionally configure detected hosts.
-
-config
-  Enable configuration of hosts detected by `scan`.
-
-Name Mapper Script
-------------------
-
-The name mapper script takes an IPv6 address as first argument and writes the
-resolved name to stdout - if any. The script must be executable.
-
-Simplest script:
-
-.. code-block:: sh
-
-  #!/bin/sh
-
-  case "$1" in
-  	"fe80::20d:b9ff:fe57:3524")
-  		printf "my-host-01"
-  		;;
-  	"fe80::7603:bdff:fe05:89bb")
-  		printf "my-host-02"
-  		;;
-  esac
-
-Resolving name from `PTR` DNS record:
-
-.. code-block:: sh
-
-  #!/bin/sh
-
-  for cmd in dig sed; do
-  	if ! command -v $cmd > /dev/null; then
-  		exit 1
-  	fi
-  done
-
-  dig +short -x "$1" | sed -e 's/.$//'

docs/src/conf.py

@@ -56,7 +56,7 @@ master_doc = 'index'
 
 # General information about the project.
 project = 'cdist'
-copyright = 'ungleich GmbH 2021'
+copyright = 'ungleich GmbH 2020'
 # author = 'Darko Poljak'
 
 # The version info for the project you're documenting, acts as replacement for

docs/src/index.rst

@@ -34,7 +34,6 @@ It natively supports IPv6 since the first release.
    cdist-parallelization
    cdist-inventory
    cdist-preos
-   cdist-scan
    cdist-integration
    cdist-reference
    cdist-best-practice

docs/src/man1/cdist.rst

@@ -88,9 +88,6 @@ SYNOPSIS
     cdist info [-h] [-a] [-c CONF_DIR] [-e] [-F] [-f] [-g CONFIG_FILE] [-t]
                [pattern]
 
-    cdist scan -I INTERFACE [--m MODE] [--name-mapper PATH_TO_SCRIPT] [--list]
-               [-d CONFIG_DELAY] [-t TRIGGER_DELAY]
-
 
 DESCRIPTION
 -----------
@@ -644,31 +641,6 @@ Display information for cdist (global explorers, types).
 **-t, --types**
     Display info for types.
 
-SCAN
-----
-
-Runs cdist as a daemon that discover/watch on hosts and reconfigure them
-periodically.
-
-**-I INTERFACE, --interfaces INTERFACE**
-    Interface to listen on. Can be specified multiple times.
-
-**-m MODE, --mode MODE**
-    Scanner components to enable. Can be specified multiple time to enable more
-    than one component. Supported modes are: scan, trigger and config. Defaults
-    to tiggger and scan.
-
-**--name-mapper PATH_TO_SCRIPT**
-    Path to script used to resolve a remote host name from an IPv6 address.
-
-**--list**
-    List known hosts and exit.
-
-**-d CONFIG_DELAY, --config-delay CONFIG_DELAY**
-    How long (seconds) to wait before reconfiguring after last try (config mode only).
-
-**-t TRIGGER_DELAY, --tigger-delay TRIGGER_DELAY**
-    How long (seconds) to wait between ICMPv6 echo requests (trigger mode only).
 
 CONFIGURATION
 -------------