Merge branch 'master' of gitlab.ethz.ch:nicosc/master-thesis
This commit is contained in:
nico
commit
64c86f874f
2 changed files with 254 additions and 5 deletions
253
doc/plan.org
253
doc/plan.org
|
|
@ -2670,7 +2670,6 @@ root@rainbow:~/master-thesis/netpfga/minip4/simple_sume_switch/bitfiles#
|
|||
|
||||
#+END_CENTER
|
||||
|
||||
|
||||
***** DONE Step 14: test the card / switch
|
||||
****** try1: adding ips, using tcpdump
|
||||
******* testing enp16s0
|
||||
|
|
@ -2953,6 +2952,45 @@ root@rainbow:/home/nico/master-thesis/bin#
|
|||
|
||||
-> only shows up on the interface that we send, not on nf0 if sending
|
||||
on nf1
|
||||
***** TODO Trying to add explicit table entry
|
||||
#+BEGIN_CENTER
|
||||
>> table_cam_add_entry lookup_table send_to_port1 ff:ff:ff:ff:ff:ff =>
|
||||
CAM_Init_ValidateContext() - done
|
||||
WROTE 0x44020050 = 0xffffffff
|
||||
WROTE 0x44020054 = 0xffff
|
||||
WROTE 0x44020080 = 0x0003
|
||||
python: ioctl: Unknown error 512
|
||||
[20:27] rainbow:CLI%
|
||||
#+END_CENTER
|
||||
***** TODO Trying to read a table entry
|
||||
#+BEGIN_CENTER
|
||||
>> table_cam_read_entry lookup_table 0
|
||||
CAM_Init_ValidateContext() - done
|
||||
WROTE 0x44020050 = 0x0000
|
||||
WROTE 0x44020054 = 0x0000
|
||||
python: ioctl: Unknown error 512
|
||||
[20:31] rainbow:CLI% python P4_SWITCH_CLI.py
|
||||
loading libsume..
|
||||
loading libsume..
|
||||
loading libcam..
|
||||
The SimpleSumeSwitch interactive command line tool
|
||||
type help to see all commands
|
||||
>> table_cam_read_entry lookup_table 1
|
||||
CAM_Init_ValidateContext() - done
|
||||
WROTE 0x44020050 = 0x0001
|
||||
WROTE 0x44020054 = 0x0000
|
||||
python: ioctl: Unknown error 512
|
||||
[20:31] rainbow:CLI% python P4_SWITCH_CLI.py
|
||||
loading libsume..
|
||||
loading libsume..
|
||||
loading libcam..
|
||||
The SimpleSumeSwitch interactive command line tool
|
||||
type help to see all commands
|
||||
>> table_cam_read_entry lookup_table p.ethernet.dstAddr
|
||||
ERROR: failed to convert p.ethernet.dstAddr of type <type 'str'> to an integer
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
*** TODO Create either HDL or PX for supporting payload checksum
|
||||
https://github.com/NetFPGA/P4-NetFPGA-public/issues/13
|
||||
https://github.com/NetFPGA/P4-NetFPGA-public/issues/13#issuecomment-490431016
|
||||
|
|
@ -3740,7 +3778,7 @@ RUN loading image file.
|
|||
minip4.bit
|
||||
attempting to launch hw_server
|
||||
|
||||
****** Xilinx hw_server v2018.2
|
||||
****** Xilinx hw_server v2018.2
|
||||
**** Build date : Jun 14 2018-20:18:37
|
||||
** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.
|
||||
|
||||
|
|
@ -3768,6 +3806,217 @@ nf3: ERROR while getting interface flags: No such device
|
|||
root@rainbow:~/master-thesis/netpfga/minip4/simple_sume_switch/bitfiles#
|
||||
|
||||
#+END_CENTER
|
||||
Full run, messages are the same:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
+ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit
|
||||
rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems.
|
||||
RUN loading image file.
|
||||
minip4.bit
|
||||
attempting to launch hw_server
|
||||
|
||||
****** Xilinx hw_server v2018.2
|
||||
**** Build date : Jun 14 2018-20:18:37
|
||||
** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.
|
||||
|
||||
INFO: hw_server application started
|
||||
INFO: Use Ctrl-C to exit hw_server application
|
||||
|
||||
INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121
|
||||
|
||||
100% 10MB 1.7MB/s 00:06
|
||||
+ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh
|
||||
Check programming FPGA or Reboot machine !
|
||||
+ rmmod sume_riffa
|
||||
rmmod: ERROR: Module sume_riffa is not currently loaded
|
||||
+ modprobe sume_riffa
|
||||
+ ifconfig nf0 up
|
||||
nf0: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf1 up
|
||||
nf1: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf2 up
|
||||
nf2: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf3 up
|
||||
nf3: ERROR while getting interface flags: No such device
|
||||
+ bash config_writes.sh
|
||||
[0:33] rainbow:minip4% sudo reboot
|
||||
|
||||
#+END_CENTER
|
||||
*** 2019-06-07: exec format error
|
||||
Trying to load kernel module now gives an error:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
[7:05] rainbow:netpfga% . ./bashinit
|
||||
[7:05] rainbow:netpfga% bash build-load-drivers.sh
|
||||
+ cd /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0
|
||||
+ make all
|
||||
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
||||
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
Building modules, stage 2.
|
||||
MODPOST 1 modules
|
||||
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
+ sudo make install
|
||||
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
||||
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
Building modules, stage 2.
|
||||
MODPOST 1 modules
|
||||
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
install -o root -g root -m 0755 -d /lib/modules/5.0.0-16-generic/extra/sume_riffa/
|
||||
install -o root -g root -m 0755 sume_riffa.ko /lib/modules/5.0.0-16-generic/extra/sume_riffa/
|
||||
depmod -a 5.0.0-16-generic
|
||||
+ sudo modprobe sume_riffa
|
||||
modprobe: ERROR: could not insert 'sume_riffa': Exec format error
|
||||
[7:06] rainbow:netpfga%
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
dmesg:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
[ 257.356321] sume_riffa: version magic '5.0.0-15-generic SMP mod_unload ' should be '5.0.0-16-generic SMP mod_unload '
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
Rebuilding module:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
[7:08] rainbow:sume_riffa_v1_0_0% make clean
|
||||
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 clean
|
||||
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
CLEAN /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/.tmp_versions
|
||||
CLEAN /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/Module.symvers
|
||||
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
[7:08] rainbow:sume_riffa_v1_0_0% make all
|
||||
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
||||
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
CC [M] /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.o
|
||||
Building modules, stage 2.
|
||||
MODPOST 1 modules
|
||||
CC /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.mod.o
|
||||
LD [M] /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.ko
|
||||
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
[7:08] rainbow:sume_riffa_v1_0_0% sudo make install
|
||||
sudo modprobe sume_riffa
|
||||
|
||||
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
||||
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
Building modules, stage 2.
|
||||
MODPOST 1 modules
|
||||
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
||||
install -o root -g root -m 0755 -d /lib/modules/5.0.0-16-generic/extra/sume_riffa/
|
||||
install -o root -g root -m 0755 sume_riffa.ko /lib/modules/5.0.0-16-generic/extra/sume_riffa/
|
||||
depmod -a 5.0.0-16-generic
|
||||
[7:08] rainbow:sume_riffa_v1_0_0%
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
The devices are back:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
[7:08] rainbow:sume_riffa_v1_0_0% ip l
|
||||
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
|
||||
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
|
||||
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
|
||||
link/ether 70:85:c2:ad:62:79 brd ff:ff:ff:ff:ff:ff
|
||||
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
|
||||
link/ether dc:8b:28:47:5c:f7 brd ff:ff:ff:ff:ff:ff
|
||||
4: nf0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
||||
link/ether 02:53:55:4d:45:00 brd ff:ff:ff:ff:ff:ff
|
||||
5: nf1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
||||
link/ether 02:53:55:4d:45:01 brd ff:ff:ff:ff:ff:ff
|
||||
6: nf2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
||||
link/ether 02:53:55:4d:45:02 brd ff:ff:ff:ff:ff:ff
|
||||
7: nf3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
||||
link/ether 02:53:55:4d:45:03 brd ff:ff:ff:ff:ff:ff
|
||||
[7:09] rainbow:sume_riffa_v1_0_0%
|
||||
|
||||
#+END_CENTER
|
||||
*** 2019-06-08: adding table entries
|
||||
|
||||
mac = 02:53:55:42:45:01 (from send_packet.py)
|
||||
|
||||
#+BEGIN_CENTER
|
||||
>> list_cam_tables
|
||||
------------
|
||||
lookup_table :
|
||||
------------
|
||||
{u'action_ids': {u'TopPipe.do_nothing': 2,
|
||||
u'TopPipe.send_to_port1': 3,
|
||||
u'TopPipe.swap_eth_addresses': 1},
|
||||
u'annotations': {u'Xilinx_ExternallyConnected': [u'0'],
|
||||
u'Xilinx_LookupEngineType': [u'EM'],
|
||||
u'name': [u'TopPipe.lookup_table']},
|
||||
u'match_type': u'EM',
|
||||
u'p4_name': u'lookup_table',
|
||||
u'px_class': u'LookupEngine',
|
||||
u'px_name': u'lookup_table',
|
||||
u'px_type_name': u'lookup_table_t',
|
||||
u'request_fields': [{u'p4_name': u'p.ethernet.dstAddr',
|
||||
u'px_name': u'lookup_request_key',
|
||||
u'size': 48,
|
||||
u'type': u'bits'}],
|
||||
u'response_fields': [{u'px_name': u'hit', u'size': 1, u'type': u'bits'},
|
||||
{u'px_name': u'action_run',
|
||||
u'size': 2,
|
||||
u'type': u'bits'}]}
|
||||
>>
|
||||
|
||||
root@rainbow:~# ip l s nf0 up
|
||||
|
||||
>> table_cam_add_entry
|
||||
ERROR:
|
||||
table_cam_add_entry <table_name> <action_name> <keys> => <action_data>
|
||||
DESCRIPTION: Add an entry to the specified table
|
||||
PARAMS:
|
||||
<table_name> : name of the table to add an entry to
|
||||
<action_name> : name of the action to use in the entry (must be listed in the table's actions list)
|
||||
<keys> : space separated list of keys to use as the entry key (must correspond to table's keys in the order defined in the P4 program)
|
||||
<action_data> : space separated list of values to provide as input to the action
|
||||
|
||||
['']
|
||||
|
||||
>> table_cam_add_entry lookup_table send_to_port1 ff:ff:ff:ff:ff:ff
|
||||
ERROR:
|
||||
table_cam_add_entry <table_name> <action_name> <keys> => <action_data>
|
||||
DESCRIPTION: Add an entry to the specified table
|
||||
PARAMS:
|
||||
<table_name> : name of the table to add an entry to
|
||||
<action_name> : name of the action to use in the entry (must be listed in the table's actions list)
|
||||
<keys> : space separated list of keys to use as the entry key (must correspond to table's keys in the order defined in the P4 program)
|
||||
<action_data> : space separated list of values to provide as input to the action
|
||||
|
||||
['lookup_table send_to_port1 ff:ff:ff:ff:ff:ff']
|
||||
[20:09] rainbow:CLI% python P4_SWITCH_CLI.py
|
||||
loading libsume..
|
||||
loading libsume..
|
||||
loading libcam..
|
||||
The SimpleSumeSwitch interactive command line tool
|
||||
type help to see all commands
|
||||
>> table_cam_add_entry lookup_table send_to_port1 => ff:ff:ff:ff:ff:ff
|
||||
ERROR:
|
||||
table_cam_add_entry <table_name> <action_name> <keys> => <action_data>
|
||||
DESCRIPTION: Add an entry to the specified table
|
||||
PARAMS:
|
||||
<table_name> : name of the table to add an entry to
|
||||
<action_name> : name of the action to use in the entry (must be listed in the table's actions list)
|
||||
<keys> : space separated list of keys to use as the entry key (must correspond to table's keys in the order defined in the P4 program)
|
||||
<action_data> : space separated list of values to provide as input to the action
|
||||
|
||||
[20:10] rainbow:CLI%
|
||||
|
||||
|
||||
table_cam_add_entry lookup_table send_to_port1 ff:ff:ff:ff:ff:ff => ""
|
||||
|
||||
>> table_cam_add_entry lookup_table send_to_port1 ff:ff:ff:ff:ff:ff =>
|
||||
CAM_Init_ValidateContext() - done
|
||||
WROTE 0x44020050 = 0xffffffff
|
||||
WROTE 0x44020054 = 0xffff
|
||||
WROTE 0x44020080 = 0x0003
|
||||
python: ioctl: Unknown error 512
|
||||
[20:27] rainbow:CLI%
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
|
||||
|
||||
** References / Follow up
|
||||
|
|
|
|||
|
|
@ -25,13 +25,13 @@ if [ "$expected_line" != "$actual_line" ]; then
|
|||
exit 1
|
||||
fi
|
||||
|
||||
# Step 6
|
||||
# Step 6: calls ${SUME_SDNET}/bin/gen_config_writes.py and generates SOMETHING
|
||||
cd $P4_PROJECT_DIR && make config_writes
|
||||
|
||||
# Step 7
|
||||
# Step 7: copies directory SDNET_OUT_DIR to TARGET and copies other dirs
|
||||
cd $P4_PROJECT_DIR && make uninstall_sdnet && make install_sdnet
|
||||
|
||||
# Step 8
|
||||
# Step 8: copies "config_writes.py" to the current dir - related to step 6
|
||||
cd $NF_DESIGN_DIR/test/sim_switch_default && make
|
||||
|
||||
# Step 9
|
||||
|
|
|
|||
Loading…
Reference in a new issue