rename
This commit is contained in:
Nico Schottelius
parent
6de32aa397
commit
90cfc76608
2 changed files with 506 additions and 141 deletions
647
doc/plan.org
647
doc/plan.org
|
|
@ -8267,146 +8267,6 @@ table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960
|
|||
|
||||
#+END_CENTER
|
||||
*** TODO 2019-08-02: ipv4 checksum after nat64 is empty!
|
||||
*** TODO 2019-08-03
|
||||
** The NetPFGA saga
|
||||
Problems encountered:
|
||||
- The logfile for a compile run is 10k+ lines
|
||||
- Many logged errors can actually be ignored (?) like:
|
||||
|
||||
ERROR: [VRFC 10-1491] unexpected EOF [/home/nico/master-thesis/netpfga/minip4/nf_sume_sdnet_ip/SimpleSumeSwitch/S_CONTROLLERs.HDL/S_CONTROLLER_SimpleSumeSwitch.vp:37]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_out_sume_metadata_DATA on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:219]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_out_sume_metadata_VALID on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:218]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_in_sume_metadata_DATA on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:185]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_in_sume_metadata_VALID on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:184]
|
||||
ERROR: [VRFC 10-2063] Module <S_RESETTER_line> not found while processing module instance <S_RESET_clk_line> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/Simp
|
||||
leSumeSwitch/SimpleSumeSwitch.v:332]
|
||||
ERROR: [VRFC 10-2063] Module <S_RESETTER_lookup> not found while processing module instance <S_RESET_clk_lookup> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/
|
||||
SimpleSumeSwitch/SimpleSumeSwitch.v:343]
|
||||
ERROR: [VRFC 10-2063] Module <S_RESETTER_control> not found while processing module instance <S_RESET_clk_control> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_i
|
||||
p/SimpleSumeSwitch/SimpleSumeSwitch.v:354]
|
||||
ERROR: [VRFC 10-2063] Module <TopParser_t> not found while processing module instance <TopParser> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleSumeSwitc
|
||||
h/SimpleSumeSwitch.v:436]
|
||||
ERROR: [VRFC 10-2063] Module <TopPipe_lvl_t> not found while processing module instance <TopPipe_lvl> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleSumeS
|
||||
witch/SimpleSumeSwitch.v:474]
|
||||
ERROR: [VRFC 10-2063] Module <dummy_table_for_netpfga_t> not found while processing module instance <dummy_table_for_netpfga> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_s
|
||||
ume_sdnet_ip/SimpleSumeSwitch/SimpleSumeSwitch.v:502]
|
||||
ERROR: [VRFC 10-2063] Module <TopPipe_lvl_0_t> not found while processing module instance <TopPipe_lvl_0> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleS
|
||||
umeSwitch/SimpleSumeSwitch.v:533]
|
||||
ERROR: [VRFC 10-2063] Module <TopDeparser_t> not found while processing module instance <TopDeparser> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleSumeS
|
||||
witch/SimpleSumeSwitch.v:561]
|
||||
|
||||
# launch_simulation -simset sim_1 -mode behavioral
|
||||
INFO: [Vivado 12-5698] Checking validity of IPs in the design for the 'XSim' simulator...
|
||||
CRITICAL WARNING: [BD 41-1356] Address block </M04_AXI/Reg> is not mapped into </S00_AXI>. Please use Address Editor to either map or exclude it.
|
||||
CRITICAL WARNING: [BD 41-1356] Address block </M05_AXI/Reg> is not mapped into </S00_AXI>. Please use Address Editor to either map or exclude it.
|
||||
|
||||
WARNING: [VRFC 10-756] identifier state is used before its declaration [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/axis_sim_record_ip0/hdl/axis_sim_record.v:93]
|
||||
WARNING: [VRFC 10-756] identifier ready_count is used before its declaration [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/axis_sim_record_ip0/hdl/axis_sim_record.v:94]
|
||||
|
||||
|
||||
|
||||
INFO: [#UNDEF] Sorry, too many errors..
|
||||
ERROR: [XSIM 43-3322] Static elaboration of top level Verilog design unit(s) in library work failed.
|
||||
INFO: [USF-XSim-69] 'elaborate' step finished in '1' seconds
|
||||
INFO: [USF-XSim-99] Step results log file:'/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log'
|
||||
ERROR: [USF-XSim-62] 'elaborate' step failed with error(s). Please check the Tcl console output or '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log' file for more information.
|
||||
|
||||
nico@nsg-System:~/master-thesis$ find . -name elaborate.log
|
||||
nico@nsg-System:~/master-thesis$ find ~ -name elaborate.log
|
||||
nico@nsg-System:~/master-thesis$
|
||||
|
||||
- Scripts that "fail" (generate wrong data) do exit 0 ->
|
||||
There is no easy / reliable error detection
|
||||
- Writing tables resulted in ioctl errors
|
||||
- Hardware test: unclear if first board was/is broken or not,
|
||||
BUT: second board in different computer allows writing tables
|
||||
- Many scripts depend on each other in later stages, without clear
|
||||
dependencies
|
||||
- There is basically no documentation for someone who "just wants to
|
||||
compile from P4 to netpfga" or A LOT of documentation (if vivado,
|
||||
vhld, sdnet documentation is counted)
|
||||
- Very high complexity in toolchain, scripts that are generated
|
||||
+ cd /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default
|
||||
+ make
|
||||
rm -f config_writes.py*
|
||||
rm -f *.pyc
|
||||
|
||||
nico@nsg-System:~$ cat /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata/config_writes.py
|
||||
|
||||
from NFTest import *
|
||||
|
||||
NUM_WRITES = 4
|
||||
|
||||
def config_tables():
|
||||
nftest_regwrite(0x44020050, 0x22222208)
|
||||
nftest_regwrite(0x44020054, 0x00000822)
|
||||
nftest_regwrite(0x44020080, 0x00000201)
|
||||
nftest_regwrite(0x44020040, 0x00000001)
|
||||
nico@nsg-System:~$ cat /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata/config_writes.sh
|
||||
#!/bin/bash
|
||||
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020050 -w 0x22222208
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020054 -w 0x00000822
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020080 -w 0x00000201
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020040 -w 0x00000001
|
||||
nico@nsg-System:~$
|
||||
|
||||
|
||||
- Misleading errors like
|
||||
ERROR: [USF-XSim-62] 'elaborate' step failed with error(s). Please check the Tcl console output or '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log' file for more information.
|
||||
nico@nsg-System:~/master-thesis/netpfga$ ls /home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log
|
||||
ls: cannot access '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log': No such file or directory
|
||||
|
||||
- not using raise() and hiding source of errors (_hexify)
|
||||
|
||||
- sometimes flashing fails:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh"
|
||||
++ which vivado
|
||||
+ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado
|
||||
+ bitimage=minip4.bit
|
||||
+ configWrites=config_writes.sh
|
||||
+ '[' -z minip4.bit ']'
|
||||
+ '[' -z config_writes.sh ']'
|
||||
+ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']'
|
||||
+ rmmod sume_riffa
|
||||
+ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit
|
||||
rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems.
|
||||
RUN loading image file.
|
||||
minip4.bit
|
||||
100% 19MB 1.7MB/s 00:11
|
||||
fpga configuration failed. DONE PIN is not HIGH
|
||||
invoked from within
|
||||
"::tcf::eval -progress ::xsdb::print_progress {::tcf::cache_enter tcfchan#0 {tcf_cache_eval {process_tcf_actions_cache_client ::tcfclient#0::arg}}}"
|
||||
(procedure "::tcf::cache_eval_with_progress" line 2)
|
||||
invoked from within
|
||||
"::tcf::cache_eval_with_progress [dict get $arg chan] [list process_tcf_actions_cache_client $argvar] $progress"
|
||||
(procedure "process_tcf_actions" line 1)
|
||||
invoked from within
|
||||
"process_tcf_actions $arg ::xsdb::print_progress"
|
||||
(procedure "fpga" line 430)
|
||||
invoked from within
|
||||
"fpga -f $bitimage"
|
||||
(file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl" line 33)
|
||||
|
||||
+ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh
|
||||
Check programming FPGA or Reboot machine !
|
||||
+ rmmod sume_riffa
|
||||
rmmod: ERROR: Module sume_riffa is not currently loaded
|
||||
+ modprobe sume_riffa
|
||||
+ ifconfig nf0 up
|
||||
nf0: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf1 up
|
||||
nf1: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf2 up
|
||||
nf2: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf3 up
|
||||
nf3: ERROR while getting interface flags: No such device
|
||||
+ bash config_writes.sh
|
||||
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$
|
||||
|
||||
#+END_CENTER
|
||||
*** TODO 2019-08-04: test nat64: ipv4 checksums
|
||||
**** DONE Setting table entries: ok
|
||||
CLOSED: [2019-08-04 Sun 08:55]
|
||||
|
|
@ -8556,7 +8416,8 @@ nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/project
|
|||
>>
|
||||
|
||||
#+END_CENTER
|
||||
**** TODO Testing translation: v4->v6
|
||||
**** DONE setting up translation: v4->v6: ok
|
||||
CLOSED: [2019-08-04 Sun 09:14]
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ ./socat-listen-tcp-v6
|
||||
nico@ESPRIMO-P956:~/master-thesis$ ./bin/sniff-intf.sh enp2s0f0 netfpga-nat64
|
||||
|
|
@ -8587,6 +8448,510 @@ nico@ESPRIMO-P956:~/master-thesis/bin$ ./set_ipv4_neighbor.sh
|
|||
+ hwaddr=03
|
||||
|
||||
#+END_CENTER
|
||||
**** DONE Testing v4->v6 tcp: ok (version 10.0)
|
||||
CLOSED: [2019-08-04 Sun 09:15]
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ ./socat-connect-tcp-v4
|
||||
+ echo from-v4-ok
|
||||
+ socat - TCP:10.0.0.66:2345
|
||||
TCPv6-ok
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ ./socat-listen-tcp-v6
|
||||
from-v4-ok
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
trace:
|
||||
netfpga-nat64-2019-08-04-0907-enp2s0f0.pcap
|
||||
netfpga-nat64-2019-08-04-0907-enp2s0f1.pcap
|
||||
|
||||
**** DONE Testing v4->v6 udp: ok (version 10.1)
|
||||
trace:
|
||||
create mode 100644 pcap/netfpga-nat64-udp-2019-08-04-0913-enp2s0f0.pcap
|
||||
create mode 100644 pcap/netfpga-nat64-udp-2019-08-04-0913-enp2s0f1.pcap
|
||||
|
||||
**** TODO NOTE: outgoing ipv4 checksum incorrect -> doesn't make sense
|
||||
As this one is generated by socat, no nat64 involed. Maybe tcp
|
||||
offloading is active.
|
||||
|
||||
*** TODO 2019-08-04: Testing more traffic: fails. trace:
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ xxd /dev/urandom | socat - UDP:10.0.0.66:2345
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ while true; do xxd /dev/urandom | socat - UDP6-LISTEN:2345; sleep 0.2; done
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
Too big for git:
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/pcap$ mv netfpga-nat64-tcp-xxd-2019-08-04-0923-enp2s0f* ~
|
||||
nico@ESPRIMO-P956:~/master-thesis/pcap$ ls -alh ~/netfpga-nat64-tcp-xxd-2019-08-04-0923-enp2s0f*
|
||||
-rw-r--r-- 1 root root 1.1G Aug 4 09:23 /home/nico/netfpga-nat64-tcp-xxd-2019-08-04-0923-enp2s0f0.pcap
|
||||
-rw-r--r-- 1 root root 301M Aug 4 09:23 /home/nico/netfpga-nat64-tcp-xxd-2019-08-04-0923-enp2s0f1.pcap
|
||||
nico@ESPRIMO-P956:~/master-thesis/pcap$
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
Limiting to 200:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis$ cd pcap; sudo tcpdump -ni enp2s0f0 -c 200 -w netfpga-nat64-tcp-xxd-2019-08-04-0926-enp2s0f0.pcap
|
||||
nico@ESPRIMO-P956:~/master-thesis/pcap$ sudo tcpdump -ni enp2s0f0 -c 200 -w netfpga-nat64-tcp-xxd-2019-08-04-0926-enp2s0f1.pcap
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
try again:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ cat /etc/passwd | socat - UDP6-LISTEN:2345
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ cat /etc/issue | socat - UDP:10.0.0.66:2345
|
||||
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
Result:
|
||||
|
||||
Ubuntu 16.04.5 LTS \n \l
|
||||
|
||||
but no passwd!
|
||||
|
||||
*** TODO IPv6 options (fragments) set that were not set before!
|
||||
Trace:
|
||||
#+BEGIN_CENTER
|
||||
create mode 100644 pcap/netfpga-nat64-tcp-xxd-2019-08-04-0930-enp2s0f0.pcap
|
||||
create mode 100644 pcap/netfpga-nat64-tcp-xxd-2019-08-04-0930-enp2s0f1.pcap
|
||||
|
||||
#+END_CENTER
|
||||
*** TODO retry manually: long packets break
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/pcap$ ~/master-thesis/bin/sniff-intf.sh enp2s0f0 netfpga-nat64-udp-manually
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ socat - UDP6-LISTEN:2345
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ socat - UDP:10.0.0.66:2345
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
very
|
||||
loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong
|
||||
text
|
||||
|
||||
sent the very long text from ipv6:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ socat - UDP6-LISTEN:2345
|
||||
hello 1
|
||||
from v6 hello
|
||||
when does it break?
|
||||
very
|
||||
loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong
|
||||
text
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
only seeing this on ipv4:
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ socat - UDP:10.0.0.66:2345
|
||||
hello 1
|
||||
from v6 hello
|
||||
when does it break?
|
||||
very
|
||||
text
|
||||
|
||||
|
||||
#+END_CENTER
|
||||
*** Analysing x520 features
|
||||
#+BEGIN_CENTER
|
||||
root@ESPRIMO-P956:~# ethtool -k enp2s0f0
|
||||
Features for enp2s0f0:
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
rx-checksumming: on
|
||||
tx-checksumming: on
|
||||
tx-checksum-ipv4: off [fixed]
|
||||
tx-checksum-ip-generic: on
|
||||
tx-checksum-ipv6: off [fixed]
|
||||
tx-checksum-fcoe-crc: on [fixed]
|
||||
tx-checksum-sctp: on
|
||||
scatter-gather: on
|
||||
tx-scatter-gather: on
|
||||
tx-scatter-gather-fraglist: off [fixed]
|
||||
tcp-segmentation-offload: on
|
||||
tx-tcp-segmentation: on
|
||||
tx-tcp-ecn-segmentation: off [fixed]
|
||||
tx-tcp-mangleid-segmentation: off
|
||||
tx-tcp6-segmentation: on
|
||||
udp-fragmentation-offload: off
|
||||
generic-segmentation-offload: on
|
||||
generic-receive-offload: on
|
||||
large-receive-offload: off
|
||||
rx-vlan-offload: on
|
||||
tx-vlan-offload: on
|
||||
ntuple-filters: off
|
||||
receive-hashing: on
|
||||
highdma: on [fixed]
|
||||
rx-vlan-filter: on
|
||||
vlan-challenged: off [fixed]
|
||||
tx-lockless: off [fixed]
|
||||
netns-local: off [fixed]
|
||||
tx-gso-robust: off [fixed]
|
||||
tx-fcoe-segmentation: on [fixed]
|
||||
tx-gre-segmentation: on
|
||||
tx-gre-csum-segmentation: on
|
||||
tx-ipxip4-segmentation: on
|
||||
tx-ipxip6-segmentation: on
|
||||
tx-udp_tnl-segmentation: on
|
||||
tx-udp_tnl-csum-segmentation: on
|
||||
tx-gso-partial: on
|
||||
tx-sctp-segmentation: off [fixed]
|
||||
tx-esp-segmentation: off [fixed]
|
||||
fcoe-mtu: off [fixed]
|
||||
tx-nocache-copy: off
|
||||
loopback: off [fixed]
|
||||
rx-fcs: off [fixed]
|
||||
rx-all: off
|
||||
tx-vlan-stag-hw-insert: off [fixed]
|
||||
rx-vlan-stag-hw-parse: off [fixed]
|
||||
rx-vlan-stag-filter: off [fixed]
|
||||
l2-fwd-offload: off
|
||||
hw-tc-offload: off
|
||||
esp-hw-offload: off [fixed]
|
||||
esp-tx-csum-hw-offload: off [fixed]
|
||||
rx-udp_tunnel-port-offload: on
|
||||
root@ESPRIMO-P956:~#
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
Changing values:
|
||||
#+BEGIN_CENTER
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 rx off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 tx off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Actual changes:
|
||||
tx-checksumming: off
|
||||
tx-checksum-ip-generic: off
|
||||
tx-checksum-sctp: off
|
||||
tcp-segmentation-offload: off
|
||||
tx-tcp-segmentation: off [requested on]
|
||||
tx-tcp6-segmentation: off [requested on]
|
||||
root@ESPRIMO-P956:~#
|
||||
root@ESPRIMO-P956:~# ethtool -k enp2s0f0 |grep -i check
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
rx-checksumming: off
|
||||
tx-checksumming: off
|
||||
tx-checksum-ipv4: off [fixed]
|
||||
tx-checksum-ip-generic: off
|
||||
tx-checksum-ipv6: off [fixed]
|
||||
tx-checksum-fcoe-crc: on [fixed]
|
||||
tx-checksum-sctp: off
|
||||
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 tx-checksum-fcoe-crc off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Could not change any device features
|
||||
root@ESPRIMO-P956:~#
|
||||
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 rx-udp_tunnel-port-offload off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
root@ESPRIMO-P956:~#
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
same for 2nd nic:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 rx-udp_tunnel-port-offload off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 rx off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 tx off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Actual changes:
|
||||
tx-checksumming: off
|
||||
tx-checksum-ip-generic: off
|
||||
tx-checksum-sctp: off
|
||||
tcp-segmentation-offload: off
|
||||
tx-tcp-segmentation: off [requested on]
|
||||
tx-tcp6-segmentation: off [requested on]
|
||||
root@ESPRIMO-P956:~#
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
See also:
|
||||
https://www.kernel.org/doc/ols/2009/ols2009-pages-169-184.pdf
|
||||
|
||||
|
||||
#+BEGIN_CENTER
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 gso off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 gso off
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
||||
root@ESPRIMO-P956:~#
|
||||
|
||||
#+END_CENTER
|
||||
*** TODO 2019-08-04: post tuning test
|
||||
|
||||
v4 side:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ socat - UDP:10.0.0.66:2345
|
||||
short line from v4
|
||||
looooooooooooooooooooooooooooooooonger line from v4
|
||||
looooooooooooooooooooooooooooooooongerlooooooooooooooooooooooooooooooooongerlooooooooooooooooooooooooooooooooonger line from v4
|
||||
from v4
|
||||
loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong
|
||||
#+END_CENTER
|
||||
|
||||
v6 side:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ socat - UDP6-LISTEN:2345
|
||||
short line from v4
|
||||
looooooooooooooooooooooooooooooooonger line from v4
|
||||
looooooooooooooooooooooooooooooooongerlooooooooooooooooooooooooooooooooongerlooooooooooooooooooooooooooooooooonger line from v4
|
||||
from v6 loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong
|
||||
from v4
|
||||
|
||||
|
||||
#+END_CENTER
|
||||
*** DONE 2019-08-04: small repeating udp: works
|
||||
CLOSED: [2019-08-04 Sun 09:58]
|
||||
#+BEGIN_CENTER
|
||||
^Cnico@ESPRIMO-P956:~/master-thesis/bin$ (while true; do echo v4: not long ok; sleep 1; done) | socat - UDP:10.0.0.66:2345
|
||||
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ (while true; do echo v4: not long ok; sleep 1; done) | socat - UDP:10.0.0.66:2345
|
||||
^Cnico@ESPRIMO-P956:~/master-thesis/bin$ (while true; do echo v6: not long ok too; sleep 1; done) | socat - UDP6-LISTEN:2345
|
||||
|
||||
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$ (while true; do echo v4: not long ok; sleep 1; done) | socat - UDP:10.0.0.66:2345
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
v6: not long ok too
|
||||
^C
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$
|
||||
|
||||
^Cnico@ESPRIMO-P956:~/master-thesis/bin$ (while true; do echo v6: not long ok too; sleep 1; done) | socat - UDP6-LISTEN:2345
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
v4: not long ok
|
||||
^C
|
||||
nico@ESPRIMO-P956:~/master-thesis/bin$
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
Trace:
|
||||
|
||||
create mode 100644 pcap/netfpga-nat64-udp-small-repeat-2019-08-04-0954-enp2s0f0.pcap
|
||||
create mode 100644 pcap/netfpga-nat64-udp-small-repeat-2019-08-04-0954-enp2s0f1.pcap
|
||||
|
||||
*** TODO 2019-08-04: problem with longer: ethernet frame check sequence broken: 0x0000000
|
||||
Points towards incorrect length:
|
||||
|
||||
ipv4 sending:
|
||||
total length = 36, udp length = 16
|
||||
50 bytes on wire
|
||||
|
||||
ipv6 receiving
|
||||
80 byte on wire
|
||||
|
||||
working frames:
|
||||
v4: 61 byte, v6 81 byte : +20
|
||||
v4 total length: 47 diff 14
|
||||
v6 payload length: 27 diff 54
|
||||
|
||||
v4: 94 byte, v6: 114 byte: +20
|
||||
v4: 170 byte, v6: 190 byte: +20
|
||||
|
||||
frame 4 udp checksum v4 broken, coming FROM v6:
|
||||
v6: 574 byte, v4: 554 byte
|
||||
v6 payload legnth 520
|
||||
v4 total length 540
|
||||
|
||||
v4 id is 0
|
||||
|
||||
udp data part 512 bytes in both cases
|
||||
|
||||
checksum --- v4 checksum correct -> is that one included in the UDP
|
||||
checksum??? ==> order might matter!
|
||||
|
||||
frame 5: !!!! 30 bytes difference! => 10 zero bytes too much at the end!!
|
||||
v4 50 bytes, v6 80 bytes
|
||||
v4 total length: 36 diff 14
|
||||
v6 payload length: 16 diff 54
|
||||
|
||||
10 bytes too much received in ipv6: exactly 10 0 bytes at the end
|
||||
-> explains frame check sequence error
|
||||
|
||||
frame 6:
|
||||
v4 546 bytes, v6 566 bytes: 20 byte difference, udp checksum broken
|
||||
|
||||
*** TODO 2019-08-04: compare netfpga behaviour with bmv2
|
||||
|
||||
***
|
||||
** The NetPFGA saga
|
||||
Problems encountered:
|
||||
- The logfile for a compile run is 10k+ lines
|
||||
- Many logged errors can actually be ignored (?) like:
|
||||
|
||||
ERROR: [VRFC 10-1491] unexpected EOF [/home/nico/master-thesis/netpfga/minip4/nf_sume_sdnet_ip/SimpleSumeSwitch/S_CONTROLLERs.HDL/S_CONTROLLER_SimpleSumeSwitch.vp:37]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_out_sume_metadata_DATA on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:219]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_out_sume_metadata_VALID on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:218]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_in_sume_metadata_DATA on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:185]
|
||||
ERROR: [VRFC 10-426] cannot find port tuple_in_sume_metadata_VALID on this module [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:184]
|
||||
ERROR: [VRFC 10-2063] Module <S_RESETTER_line> not found while processing module instance <S_RESET_clk_line> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/Simp
|
||||
leSumeSwitch/SimpleSumeSwitch.v:332]
|
||||
ERROR: [VRFC 10-2063] Module <S_RESETTER_lookup> not found while processing module instance <S_RESET_clk_lookup> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/
|
||||
SimpleSumeSwitch/SimpleSumeSwitch.v:343]
|
||||
ERROR: [VRFC 10-2063] Module <S_RESETTER_control> not found while processing module instance <S_RESET_clk_control> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_i
|
||||
p/SimpleSumeSwitch/SimpleSumeSwitch.v:354]
|
||||
ERROR: [VRFC 10-2063] Module <TopParser_t> not found while processing module instance <TopParser> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleSumeSwitc
|
||||
h/SimpleSumeSwitch.v:436]
|
||||
ERROR: [VRFC 10-2063] Module <TopPipe_lvl_t> not found while processing module instance <TopPipe_lvl> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleSumeS
|
||||
witch/SimpleSumeSwitch.v:474]
|
||||
ERROR: [VRFC 10-2063] Module <dummy_table_for_netpfga_t> not found while processing module instance <dummy_table_for_netpfga> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_s
|
||||
ume_sdnet_ip/SimpleSumeSwitch/SimpleSumeSwitch.v:502]
|
||||
ERROR: [VRFC 10-2063] Module <TopPipe_lvl_0_t> not found while processing module instance <TopPipe_lvl_0> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleS
|
||||
umeSwitch/SimpleSumeSwitch.v:533]
|
||||
ERROR: [VRFC 10-2063] Module <TopDeparser_t> not found while processing module instance <TopDeparser> [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/SimpleSumeS
|
||||
witch/SimpleSumeSwitch.v:561]
|
||||
|
||||
# launch_simulation -simset sim_1 -mode behavioral
|
||||
INFO: [Vivado 12-5698] Checking validity of IPs in the design for the 'XSim' simulator...
|
||||
CRITICAL WARNING: [BD 41-1356] Address block </M04_AXI/Reg> is not mapped into </S00_AXI>. Please use Address Editor to either map or exclude it.
|
||||
CRITICAL WARNING: [BD 41-1356] Address block </M05_AXI/Reg> is not mapped into </S00_AXI>. Please use Address Editor to either map or exclude it.
|
||||
|
||||
WARNING: [VRFC 10-756] identifier state is used before its declaration [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/axis_sim_record_ip0/hdl/axis_sim_record.v:93]
|
||||
WARNING: [VRFC 10-756] identifier ready_count is used before its declaration [/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/axis_sim_record_ip0/hdl/axis_sim_record.v:94]
|
||||
|
||||
|
||||
|
||||
INFO: [#UNDEF] Sorry, too many errors..
|
||||
ERROR: [XSIM 43-3322] Static elaboration of top level Verilog design unit(s) in library work failed.
|
||||
INFO: [USF-XSim-69] 'elaborate' step finished in '1' seconds
|
||||
INFO: [USF-XSim-99] Step results log file:'/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log'
|
||||
ERROR: [USF-XSim-62] 'elaborate' step failed with error(s). Please check the Tcl console output or '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log' file for more information.
|
||||
|
||||
nico@nsg-System:~/master-thesis$ find . -name elaborate.log
|
||||
nico@nsg-System:~/master-thesis$ find ~ -name elaborate.log
|
||||
nico@nsg-System:~/master-thesis$
|
||||
|
||||
- Scripts that "fail" (generate wrong data) do exit 0 ->
|
||||
There is no easy / reliable error detection
|
||||
- Writing tables resulted in ioctl errors
|
||||
- Hardware test: unclear if first board was/is broken or not,
|
||||
BUT: second board in different computer allows writing tables
|
||||
- Many scripts depend on each other in later stages, without clear
|
||||
dependencies
|
||||
- There is basically no documentation for someone who "just wants to
|
||||
compile from P4 to netpfga" or A LOT of documentation (if vivado,
|
||||
vhld, sdnet documentation is counted)
|
||||
- Very high complexity in toolchain, scripts that are generated
|
||||
+ cd /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default
|
||||
+ make
|
||||
rm -f config_writes.py*
|
||||
rm -f *.pyc
|
||||
|
||||
nico@nsg-System:~$ cat /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata/config_writes.py
|
||||
|
||||
from NFTest import *
|
||||
|
||||
NUM_WRITES = 4
|
||||
|
||||
def config_tables():
|
||||
nftest_regwrite(0x44020050, 0x22222208)
|
||||
nftest_regwrite(0x44020054, 0x00000822)
|
||||
nftest_regwrite(0x44020080, 0x00000201)
|
||||
nftest_regwrite(0x44020040, 0x00000001)
|
||||
nico@nsg-System:~$ cat /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata/config_writes.sh
|
||||
#!/bin/bash
|
||||
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020050 -w 0x22222208
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020054 -w 0x00000822
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020080 -w 0x00000201
|
||||
${SUME_SDNET}/sw/sume/rwaxi -a 0x44020040 -w 0x00000001
|
||||
nico@nsg-System:~$
|
||||
|
||||
|
||||
- Misleading errors like
|
||||
ERROR: [USF-XSim-62] 'elaborate' step failed with error(s). Please check the Tcl console output or '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log' file for more information.
|
||||
nico@nsg-System:~/master-thesis/netpfga$ ls /home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log
|
||||
ls: cannot access '/home/nico/master-thesis/netpfga/minip4/simple_sume_switch/hw/project/simple_sume_switch.sim/sim_1/behav/xsim/elaborate.log': No such file or directory
|
||||
|
||||
- not using raise() and hiding source of errors (_hexify)
|
||||
|
||||
- sometimes flashing fails:
|
||||
|
||||
#+BEGIN_CENTER
|
||||
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh"
|
||||
++ which vivado
|
||||
+ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado
|
||||
+ bitimage=minip4.bit
|
||||
+ configWrites=config_writes.sh
|
||||
+ '[' -z minip4.bit ']'
|
||||
+ '[' -z config_writes.sh ']'
|
||||
+ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']'
|
||||
+ rmmod sume_riffa
|
||||
+ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit
|
||||
rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems.
|
||||
RUN loading image file.
|
||||
minip4.bit
|
||||
100% 19MB 1.7MB/s 00:11
|
||||
fpga configuration failed. DONE PIN is not HIGH
|
||||
invoked from within
|
||||
"::tcf::eval -progress ::xsdb::print_progress {::tcf::cache_enter tcfchan#0 {tcf_cache_eval {process_tcf_actions_cache_client ::tcfclient#0::arg}}}"
|
||||
(procedure "::tcf::cache_eval_with_progress" line 2)
|
||||
invoked from within
|
||||
"::tcf::cache_eval_with_progress [dict get $arg chan] [list process_tcf_actions_cache_client $argvar] $progress"
|
||||
(procedure "process_tcf_actions" line 1)
|
||||
invoked from within
|
||||
"process_tcf_actions $arg ::xsdb::print_progress"
|
||||
(procedure "fpga" line 430)
|
||||
invoked from within
|
||||
"fpga -f $bitimage"
|
||||
(file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl" line 33)
|
||||
|
||||
+ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh
|
||||
Check programming FPGA or Reboot machine !
|
||||
+ rmmod sume_riffa
|
||||
rmmod: ERROR: Module sume_riffa is not currently loaded
|
||||
+ modprobe sume_riffa
|
||||
+ ifconfig nf0 up
|
||||
nf0: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf1 up
|
||||
nf1: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf2 up
|
||||
nf2: ERROR while getting interface flags: No such device
|
||||
+ ifconfig nf3 up
|
||||
nf3: ERROR while getting interface flags: No such device
|
||||
+ bash config_writes.sh
|
||||
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$
|
||||
|
||||
#+END_CENTER
|
||||
|
||||
** References / Follow up
|
||||
*** RFC 791 IPv4 https://tools.ietf.org/html/rfc791
|
||||
*** RFC 792 ICMP https://tools.ietf.org/html/rfc792
|
||||
|
|
|
|||
Loading…
Reference in a new issue