2375 lines
102 KiB
TeX
2375 lines
102 KiB
TeX
\chapter{\label{appendixminus1}Resources and code repositories}
|
|
The following sections describe how to acquire the resources
|
|
to reproduce the test results. All compilations were made on Ubuntu
|
|
16.04 with kernels
|
|
\begin{itemize}
|
|
\item 4.15.0-54-generic (Supporting Desktop)
|
|
\item 4.4.0-143-generic (BMV2 test VM)
|
|
\item 4.15.0-55-generic (Desktop with NetFPGA card)
|
|
\end{itemize}
|
|
% ok
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterminus1:thesis:general}Master Thesis}
|
|
The master thesis including all self developed source code is
|
|
available by git via
|
|
\begin{verbatim}
|
|
git clone git@gitlab.ethz.ch:nicosc/master-thesis.git
|
|
git clone https://gitlab.ethz.ch/nsg/student-projects/ma-2019-19_high_speed_nat64_with_p4
|
|
\end{verbatim}
|
|
It can be browsed online on
|
|
\url{https://gitlab.ethz.ch/nicosc/master-thesis} and on
|
|
\url{https://gitlab.ethz.ch/nsg/student-projects/ma-2019-19_high_speed_nat64_with_p4}.
|
|
% ok
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterminus1:thesis:xilinx}Xilinx Toolchain}
|
|
A prerequisite for building the NetFGPA source code is the
|
|
installation of
|
|
\begin{itemize}
|
|
\item \verb=Xilinx_SDNet_2018.2_1005_9=
|
|
\item \verb=Xilinx_Vivado_SDK_2018.2_0614_1954=
|
|
\end{itemize}
|
|
Both tools need to be installed to /opt/Xilinx/, as paths are
|
|
hardcoded in various places.
|
|
% ok
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterminus1:thesis}NetFGPA support scripts}
|
|
To be able to compile P4 source code to the NetFPGA the collection of
|
|
scripts, Makefiles and sample code of P4-NetFGPA is required.
|
|
|
|
The repository \url{git@github.com:NetFPGA/P4-NetFPGA-live.git} needs
|
|
to be cloned to ``projects'' subdirectory as ``P4-NetPFGA''
|
|
of the user that wants to
|
|
compile the source code. Access to the repository is granted after
|
|
applying for access as described on
|
|
\url{https://github.com/NetFPGA/P4-NetFPGA-public/wiki}.
|
|
After that the variable \verb=P4_PROJECT_NAME= in
|
|
\texttt{~/projects/P4-NetFPGA/tools/settings.sh} needs to be modified to
|
|
read \verb|export P4_PROJECT_NAME=minip4| instead of
|
|
\verb|export P4_PROJECT_NAME=switch_calc|.
|
|
Sample code for installation:
|
|
|
|
\begin{verbatim}
|
|
mkdir -p ~/projects
|
|
git clone git@github.com:NetFPGA/P4-NetFPGA-live.git P4-NetFPGA
|
|
sed -i 's/\(P4_PROJECT_NAME=\).*/\1minip4/' ~/projects/P4-NetFPGA/tools/settings.sh
|
|
\end{verbatim}
|
|
Version \textbf{v1.3.1-46-g97d3aaa} of the P4-NetPFGA repository was
|
|
used for creating the bitfiles of this project.
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/projects/P4-NetFPGA$ git describe --always
|
|
v1.3.1-46-g97d3aaa
|
|
\end{verbatim}
|
|
% ok
|
|
% ----------------------------------------------------------------------
|
|
\chapter{\label{appendix0}BMV2 environment and tests}
|
|
All BMV2 based compilations were made with the following compiler:
|
|
\begin{verbatim}
|
|
p4@ubuntu:~$ p4c --version
|
|
p4c 0.5 (SHA: 5ae30ee)
|
|
\end{verbatim}
|
|
|
|
The installation is based on the vagrant files that were provided in
|
|
the ``Advanced Topics in
|
|
Communication Networks Fall 2018'' course of
|
|
ETHZ (\url{https://adv-net.ethz.ch/2018/}) and contains p4tools as
|
|
well as all utilities that came with the vagrant installation.
|
|
% ok
|
|
% ----------------------------------------------------------------------
|
|
%\section{\label{chapter0:bmv2-diff}Diff based checksumming}
|
|
For running the diff based checksum code, the following steps are
|
|
necessary:
|
|
|
|
Compiling the p4 code and starting the switch:
|
|
\begin{verbatim}
|
|
cd ~/master-thesis/p4app
|
|
sudo p4run --config nat64-diff.json
|
|
\end{verbatim}
|
|
|
|
Starting the controller which sets up the required table entries:
|
|
|
|
\begin{verbatim}
|
|
cd ~/master-thesis/p4app
|
|
sudo python ./controller.py --mode range_router
|
|
\end{verbatim}
|
|
|
|
|
|
% ----------------------------------------------------------------------
|
|
\chapter{\label{appendixA}NetFPGA environment and tests}
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterA:netpfga-setup}NetFPGA Setup}
|
|
Description of installation, commit of netpfga-live
|
|
% ----------------------------------------------------------------------
|
|
|
|
\section{\label{chapterA:netpfga:compile}NetFPGA Compile Flow}
|
|
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterA:section1}NetFPGA NAT64 Test cases}
|
|
todo: add graphic of nsg <-> esprimo cabling
|
|
\begin{verbatim}
|
|
|
|
ip addr add 10.0.0.42/24 dev enp2s0f0
|
|
|
|
# Adding necessary ARP entries: for the virtual IPv4 address(es)
|
|
ip neigh add 10.0.0.6 lladdr f8:f2:1e:09:62:d1 dev enp2s0f0
|
|
ip neigh add 10.0.0.42 lladdr f8:f2:1e:09:62:d1 dev enp2s0f0
|
|
|
|
\end{verbatim}
|
|
|
|
For all test cases the following network settings on esprimo:
|
|
|
|
\begin{verbatim}
|
|
12: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
|
|
link/ether f8:f2:1e:09:62:d0 brd ff:ff:ff:ff:ff:ff
|
|
inet 10.0.0.42/24 scope global enp2s0f0
|
|
valid_lft forever preferred_lft forever
|
|
inet6 fe80::faf2:1eff:fe09:62d0/64 scope link
|
|
valid_lft forever preferred_lft forever
|
|
13: enp2s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
|
|
link/ether f8:f2:1e:09:62:d1 brd ff:ff:ff:ff:ff:ff
|
|
inet6 2001:db8:42::42/64 scope global
|
|
valid_lft forever preferred_lft forever
|
|
inet6 fe80::faf2:1eff:fe09:62d1/64 scope link
|
|
valid_lft forever preferred_lft forever
|
|
\end{verbatim}
|
|
% ----------------------------------------------------------------------
|
|
\subsection{Test 1: IPv4 egress}
|
|
Scenario: simple egress port setting for the IPv4 addresses
|
|
|
|
Step 1: getting correct values for table entries from python:
|
|
|
|
\begin{verbatim}
|
|
>>> int(ipaddress.IPv4Address(u"10.0.0.42"))
|
|
167772202
|
|
>>> int(ipaddress.IPv4Address(u"10.0.0.4"))
|
|
167772164
|
|
>>>
|
|
|
|
\end{verbatim}
|
|
|
|
Step 2: setting table netries
|
|
|
|
\begin{verbatim}
|
|
|
|
>> table_cam_add_entry realmain_v4_networks_0 realmain.set_egress_port 167772202 => 16 0 0 0 0
|
|
fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)]
|
|
action_name = TopPipe.realmain.set_egress_port
|
|
field_vals = [1, '16', '0', '0', '0', '0']
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020250 = 0xa00002a
|
|
WROTE 0x44020280 = 0x0000
|
|
WROTE 0x44020284 = 0x0000
|
|
WROTE 0x44020288 = 0x10000000
|
|
WROTE 0x4402028c = 0x0001
|
|
READ 0x44020244 = 0x0001
|
|
WROTE 0x44020240 = 0x0001
|
|
READ 0x44020244 = 0x0001
|
|
READ 0x44020244 = 0x0001
|
|
success
|
|
>> table_cam_add_entry realmain_v4_networks_0 realmain.set_egress_port 167772164 => 16 0 0 0 0
|
|
fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)]
|
|
action_name = TopPipe.realmain.set_egress_port
|
|
field_vals = [1, '16', '0', '0', '0', '0']
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020250 = 0xa000004
|
|
WROTE 0x44020280 = 0x0000
|
|
WROTE 0x44020284 = 0x0000
|
|
WROTE 0x44020288 = 0x10000000
|
|
WROTE 0x4402028c = 0x0001
|
|
READ 0x44020244 = 0x0001
|
|
WROTE 0x44020240 = 0x0001
|
|
READ 0x44020244 = 0x0001
|
|
READ 0x44020244 = 0x0001
|
|
success
|
|
>>
|
|
\end{verbatim}
|
|
|
|
Step 3: setting arp entries
|
|
|
|
\begin{verbatim}
|
|
root@ESPRIMO-P956:~# ip neigh add 10.0.0.6 lladdr f8:f2:1e:09:62:d1 dev enp2s0f0
|
|
root@ESPRIMO-P956:~# ip neigh add 10.0.0.4 lladdr f8:f2:1e:09:62:d1 dev enp2s0f0
|
|
|
|
\end{verbatim}
|
|
Step 3: generating test packets, expecting 4 packets to show up on
|
|
enp2s0f0:
|
|
|
|
%\tvb
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ sudo tcpdump -ni enp2s0f0
|
|
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
|
|
listening on enp2s0f0, link-type EN10MB (Ethernet), capture size 262144 bytes
|
|
10:49:28.200407 IP 10.0.0.42 > 10.0.0.4: ICMP echo request, id 4440, seq 1, length 64
|
|
10:49:28.200445 IP 10.0.0.42 > 10.0.0.4: ICMP echo request, id 4440, seq 1, length 64
|
|
10:49:29.222340 IP 10.0.0.42 > 10.0.0.4: ICMP echo request, id 4440, seq 2, length 64
|
|
10:49:29.222418 IP 10.0.0.42 > 10.0.0.4: ICMP echo request, id 4440, seq 2, length 64
|
|
\end{verbatim}
|
|
%\tve
|
|
|
|
Result: sucess
|
|
|
|
|
|
% ----------------------------------------------------------------------
|
|
\subsection{Test 2: IPv6 egress}
|
|
Similar to the IPv4 setting before, just for IPv6.
|
|
|
|
Step 1: getting IP address values
|
|
|
|
\begin{verbatim}
|
|
>>> int(ipaddress.IPv6Address(u"2001:db8:42::4"))
|
|
42540766411362381960998550477184434180L
|
|
>>> int(ipaddress.IPv6Address(u"2001:db8:42::6"))
|
|
42540766411362381960998550477184434182L
|
|
>>> int(ipaddress.IPv6Address(u"2001:db8:42::42"))
|
|
42540766411362381960998550477184434242L
|
|
|
|
\end{verbatim}
|
|
|
|
Step 2: setting table entries
|
|
|
|
\begin{verbatim}
|
|
>> table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477184434182 => 64 0 0 0 0
|
|
fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)]
|
|
action_name = TopPipe.realmain.set_egress_port
|
|
field_vals = [1, '64', '0', '0', '0', '0']
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020350 = 0x0006
|
|
WROTE 0x44020354 = 0x0000
|
|
WROTE 0x44020358 = 0x420000
|
|
WROTE 0x4402035c = 0x20010db8
|
|
WROTE 0x44020380 = 0x0000
|
|
WROTE 0x44020384 = 0x0000
|
|
WROTE 0x44020388 = 0x40000000
|
|
WROTE 0x4402038c = 0x0001
|
|
READ 0x44020344 = 0x0001
|
|
WROTE 0x44020340 = 0x0001
|
|
READ 0x44020344 = 0x0001
|
|
READ 0x44020344 = 0x0001
|
|
success
|
|
>> table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477184434242 => 64 0 0 0 0
|
|
fields = [(u'hit', 1), (u'action_run', 3), (u'out_port', 8), (u'out_port', 8), (u'mac_addr', 48), (u'task', 16), (u'table_id', 16)]
|
|
action_name = TopPipe.realmain.set_egress_port
|
|
field_vals = [1, '64', '0', '0', '0', '0']
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020350 = 0x0042
|
|
WROTE 0x44020354 = 0x0000
|
|
WROTE 0x44020358 = 0x420000
|
|
WROTE 0x4402035c = 0x20010db8
|
|
WROTE 0x44020380 = 0x0000
|
|
WROTE 0x44020384 = 0x0000
|
|
WROTE 0x44020388 = 0x40000000
|
|
WROTE 0x4402038c = 0x0001
|
|
READ 0x44020344 = 0x0001
|
|
WROTE 0x44020340 = 0x0001
|
|
READ 0x44020344 = 0x0001
|
|
READ 0x44020344 = 0x0001
|
|
success
|
|
>>
|
|
\end{verbatim}
|
|
|
|
Step 3: setting neighbor entries
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ sudo ip -6 neigh add 2001:db8:42::6 lladdr f8:f2:1e:09:62:d0 dev enp2s0f1
|
|
nico@ESPRIMO-P956:~$ sudo ip -6 neigh add 2001:db8:42::4 lladdr f8:f2:1e:09:62:d0 dev enp2s0f1
|
|
\end{verbatim}
|
|
|
|
Step 4: generating test packets
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ ping6 -c2 2001:db8:42::6
|
|
PING 2001:db8:42::6(2001:db8:42::6) 56 data bytes
|
|
|
|
|
|
nico@ESPRIMO-P956:~$ sudo tcpdump -ni enp2s0f1
|
|
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
|
|
listening on enp2s0f1, link-type EN10MB (Ethernet), capture size 262144 bytes
|
|
11:30:17.287577 IP6 2001:db8:42::42 > 2001:db8:42::6: ICMP6, echo request, seq 1, length 64
|
|
11:30:17.287599 IP6 2001:db8:42::42 > 2001:db8:42::6: ICMP6, echo request, seq 1, length 64
|
|
11:30:18.310178 IP6 2001:db8:42::42 > 2001:db8:42::6: ICMP6, echo request, seq 2, length 64
|
|
11:30:18.310258 IP6 2001:db8:42::42 > 2001:db8:42::6: ICMP6, echo request, seq 2, length 64
|
|
|
|
\end{verbatim}
|
|
|
|
Result: success, packet is seen twice.
|
|
|
|
% ------------------------------------------------------------------------------
|
|
\subsection{Test 3: NAT64}
|
|
|
|
Additionally to the preparations done in test 1 and 2, the following
|
|
steps were taken:
|
|
|
|
Step 1: getting IP address values via Python
|
|
|
|
\begin{verbatim}
|
|
>>> int(ipaddress.IPv6Address(u"2001:db8:42::2a"))
|
|
42540766411362381960998550477184434218L
|
|
|
|
>>> int(ipaddress.IPv6Address(u"2001:db8:42::"))
|
|
42540766411362381960998550477184434176L
|
|
|
|
>>> int(ipaddress.IPv6Address(u"2001:db8:42::a00:2a"))
|
|
42540766411362381960998550477352206378
|
|
|
|
>>> int(ipaddress.IPv4Address(u"10.0.0.0"))
|
|
167772160
|
|
|
|
|
|
>>> int(ipaddress.IPv4Address(u"10.0.0.66"))
|
|
167772226
|
|
|
|
\end{verbatim}
|
|
|
|
Add table entry for 2001:db8:42:2a to be translated to 10.0.0.42:
|
|
|
|
\begin{verbatim}
|
|
>> table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960998550477184434218 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0
|
|
fields = [(u'hit', 1), (u'action_run', 3), (u'v6_src', 128), (u'v4_dst', 32), (u'nat64_prefix', 128), (u'table_id', 16)]
|
|
action_name = TopPipe.realmain.nat64_static
|
|
field_vals = [2, '42540766411362381960998550477184434176', '167772160', '42540766411362381960998550477184434176', '0']
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020050 = 0x002a
|
|
WROTE 0x44020054 = 0x0000
|
|
WROTE 0x44020058 = 0x420000
|
|
WROTE 0x4402005c = 0x20010db8
|
|
WROTE 0x44020080 = 0x0000
|
|
WROTE 0x44020084 = 0x0000
|
|
WROTE 0x44020088 = 0x0000
|
|
WROTE 0x4402008c = 0xdb80042
|
|
WROTE 0x44020090 = 0x2001
|
|
WROTE 0x44020094 = 0x0a00
|
|
WROTE 0x44020098 = 0x0000
|
|
WROTE 0x4402009c = 0x0000
|
|
WROTE 0x440200a0 = 0xdb80042
|
|
WROTE 0x440200a4 = 0x22001
|
|
READ 0x44020044 = 0x0001
|
|
WROTE 0x44020040 = 0x0001
|
|
READ 0x44020044 = 0x0001
|
|
READ 0x44020044 = 0x0001
|
|
success
|
|
>>
|
|
|
|
\end{verbatim}
|
|
|
|
Add table entry for 2001:db8:42::a00:2a to be translated to 10.0.0.66:
|
|
\begin{verbatim}
|
|
table_cam_add_entry realmain_nat64_0 realmain.nat64_static 42540766411362381960998550477352206378 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0
|
|
\end{verbatim}
|
|
|
|
Add table entry for 10.0.0.66 to be translated to 2001:db8:42:42:
|
|
|
|
\begin{verbatim}
|
|
>> table_cam_add_entry realmain_nat46_0 realmain.nat46_static 167772226 => 42540766411362381960998550477184434176 167772160 42540766411362381960998550477184434176 0
|
|
fields = [(u'hit', 1), (u'action_run', 3), (u'v6_src', 128), (u'v4_dst', 32), (u'nat64_prefix', 128), (u'table_id', 16)]
|
|
action_name = TopPipe.realmain.nat46_static
|
|
field_vals = [2, '42540766411362381960998550477184434176', '167772160', '42540766411362381960998550477184434176', '0']
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020150 = 0xa000042
|
|
WROTE 0x44020180 = 0x0000
|
|
WROTE 0x44020184 = 0x0000
|
|
WROTE 0x44020188 = 0x0000
|
|
WROTE 0x4402018c = 0xdb80042
|
|
WROTE 0x44020190 = 0x2001
|
|
WROTE 0x44020194 = 0x0a00
|
|
WROTE 0x44020198 = 0x0000
|
|
WROTE 0x4402019c = 0x0000
|
|
WROTE 0x440201a0 = 0xdb80042
|
|
WROTE 0x440201a4 = 0x22001
|
|
READ 0x44020144 = 0x0001
|
|
WROTE 0x44020140 = 0x0001
|
|
READ 0x44020144 = 0x0001
|
|
READ 0x44020144 = 0x0001
|
|
success
|
|
>>
|
|
\end{verbatim}
|
|
|
|
|
|
Step 3: setting neighbor entries
|
|
|
|
\begin{verbatim}
|
|
sudo ip neigh add 10.0.0.66 lladdr f8:f2:1e:09:62:d1 dev enp2s0f0
|
|
sudo ip -6 neigh add 2001:db8:42::2a lladdr f8:f2:1e:09:62:d0 dev enp2s0f1
|
|
sudo ip -6 neighbor add 2001:db8:42::a00:2a lladdr f8:f2:1e:09:62:d0 dev enp2s0f1
|
|
|
|
\end{verbatim}
|
|
|
|
Step 4: ping test should translate, but fail with wrong checksum:
|
|
|
|
% ----------------------------------------------------------------------
|
|
\chapter{\label{appendixB}NetFPGA Logs}
|
|
Majority of the log files are stored inside the source code directory
|
|
stored at ``netpfga/logs''. It follows a selection of excerpts
|
|
of log files that might be relevant for reproducing the work.
|
|
% ----------------------------------------------------------------------
|
|
|
|
\section{\label{chapterB:netpfga-flasherror}NetFPGA Flash Errors}
|
|
Sometimes flashing bitfiles to the NetFPGA will fail. A random amount
|
|
of reboots (1 to 3) and a random amount of reflashing will fix this
|
|
problem.
|
|
|
|
Below can be found the log output from the flashing process.
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh"
|
|
++ which vivado
|
|
+ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado
|
|
+ bitimage=minip4.bit
|
|
+ configWrites=config_writes.sh
|
|
+ '[' -z minip4.bit ']'
|
|
+ '[' -z config_writes.sh ']'
|
|
+ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']'
|
|
+ rmmod sume_riffa
|
|
+ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit
|
|
rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems.
|
|
RUN loading image file.
|
|
minip4.bit
|
|
100% 19MB 1.7MB/s 00:11
|
|
fpga configuration failed. DONE PIN is not HIGH
|
|
invoked from within
|
|
"::tcf::eval -progress ::xsdb::print_progress {::tcf::cache_enter tcfchan#0 {tcf_cache_eval {process_tcf_actions_cache_client ::tcfclient#0::arg}}}"
|
|
(procedure "::tcf::cache_eval_with_progress" line 2)
|
|
invoked from within
|
|
"::tcf::cache_eval_with_progress [dict get $arg chan] [list process_tcf_actions_cache_client $argvar] $progress"
|
|
(procedure "process_tcf_actions" line 1)
|
|
invoked from within
|
|
"process_tcf_actions $arg ::xsdb::print_progress"
|
|
(procedure "fpga" line 430)
|
|
invoked from within
|
|
"fpga -f $bitimage"
|
|
(file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl" line 33)
|
|
|
|
+ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh
|
|
Check programming FPGA or Reboot machine !
|
|
+ rmmod sume_riffa
|
|
rmmod: ERROR: Module sume_riffa is not currently loaded
|
|
+ modprobe sume_riffa
|
|
+ ifconfig nf0 up
|
|
nf0: ERROR while getting interface flags: No such device
|
|
+ ifconfig nf1 up
|
|
nf1: ERROR while getting interface flags: No such device
|
|
+ ifconfig nf2 up
|
|
nf2: ERROR while getting interface flags: No such device
|
|
+ ifconfig nf3 up
|
|
nf3: ERROR while getting interface flags: No such device
|
|
+ bash config_writes.sh
|
|
|
|
\end{verbatim}
|
|
% ----------------------------------------------------------------------
|
|
|
|
\section{\label{chapterB:netpfga-flashok}NetFPGA Flash Success}
|
|
A successful flashing process also emits a couple of errors, however
|
|
the message ``fpga configuration failed. DONE PIN is not HIGH'' and
|
|
its succeeding lines are missing, as seen below.
|
|
|
|
After that in all cases a reboot is required; the PCI rescan in no
|
|
tested case showed the nf devices.
|
|
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~$ cd $NF_DESIGN_DIR/bitfiles/
|
|
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$ sudo bash -c ". $HOME/master-thesis/netpfga/bashinit && $(pwd -P)/program_switch.sh"
|
|
++ which vivado
|
|
+ xilinx_tool_path=/opt/Xilinx/Vivado/2018.2/bin/vivado
|
|
+ bitimage=minip4.bit
|
|
+ configWrites=config_writes.sh
|
|
+ '[' -z minip4.bit ']'
|
|
+ '[' -z config_writes.sh ']'
|
|
+ '[' /opt/Xilinx/Vivado/2018.2/bin/vivado == '' ']'
|
|
+ rmmod sume_riffa
|
|
+ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit
|
|
rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems.
|
|
RUN loading image file.
|
|
minip4.bit
|
|
attempting to launch hw_server
|
|
|
|
****** Xilinx hw_server v2018.2
|
|
**** Build date : Jun 14 2018-20:18:37
|
|
** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.
|
|
|
|
INFO: hw_server application started
|
|
INFO: Use Ctrl-C to exit hw_server application
|
|
|
|
INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121
|
|
|
|
100% 19MB 1.7MB/s 00:11
|
|
+ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh
|
|
Check programming FPGA or Reboot machine !
|
|
+ rmmod sume_riffa
|
|
rmmod: ERROR: Module sume_riffa is not currently loaded
|
|
+ modprobe sume_riffa
|
|
+ ifconfig nf0 up
|
|
nf0: ERROR while getting interface flags: No such device
|
|
+ ifconfig nf1 up
|
|
nf1: ERROR while getting interface flags: No such device
|
|
+ ifconfig nf2 up
|
|
nf2: ERROR while getting interface flags: No such device
|
|
+ ifconfig nf3 up
|
|
nf3: ERROR while getting interface flags: No such device
|
|
+ bash config_writes.sh
|
|
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/bitfiles$
|
|
\end{verbatim}
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterB:netpfga-kernelmodule}NetFPGA Kernel module}
|
|
After a successful flash, loading the kernel module will enable nf
|
|
devices to appear in the operating system.
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~$ ip l
|
|
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
|
|
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
|
|
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
|
|
link/ether 74:d0:2b:98:38:f6 brd ff:ff:ff:ff:ff:ff
|
|
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether f8:f2:1e:41:44:9c brd ff:ff:ff:ff:ff:ff
|
|
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether f8:f2:1e:41:44:9d brd ff:ff:ff:ff:ff:ff
|
|
5: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
|
|
link/none
|
|
nico@nsg-System:~$ ~/master-thesis/bin/build-load-drivers.sh
|
|
+ cd /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0
|
|
+ sudo modprobe -r sume_riffa
|
|
+ make clean
|
|
make -C /lib/modules/4.15.0-55-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 clean
|
|
make[1]: Entering directory '/usr/src/linux-headers-4.15.0-55-generic'
|
|
CLEAN /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/.tmp_versions
|
|
CLEAN /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/Module.symvers
|
|
make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-55-generic'
|
|
+ make all
|
|
make -C /lib/modules/4.15.0-55-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
|
make[1]: Entering directory '/usr/src/linux-headers-4.15.0-55-generic'
|
|
CC [M] /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.o
|
|
Building modules, stage 2.
|
|
MODPOST 1 modules
|
|
CC /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.mod.o
|
|
LD [M] /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0/sume_riffa.ko
|
|
make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-55-generic'
|
|
+ sudo make install
|
|
make -C /lib/modules/4.15.0-55-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
|
make[1]: Entering directory '/usr/src/linux-headers-4.15.0-55-generic'
|
|
Building modules, stage 2.
|
|
MODPOST 1 modules
|
|
make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-55-generic'
|
|
install -o root -g root -m 0755 -d /lib/modules/4.15.0-55-generic/extra/sume_riffa/
|
|
install -o root -g root -m 0755 sume_riffa.ko /lib/modules/4.15.0-55-generic/extra/sume_riffa/
|
|
depmod -a 4.15.0-55-generic
|
|
+ sudo modprobe sume_riffa
|
|
+ grep sume_riffa
|
|
+ lsmod
|
|
sume_riffa 28672 0
|
|
nico@nsg-System:~$
|
|
nico@nsg-System:~$ ip l
|
|
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
|
|
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
|
|
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
|
|
link/ether 74:d0:2b:98:38:f6 brd ff:ff:ff:ff:ff:ff
|
|
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether f8:f2:1e:41:44:9c brd ff:ff:ff:ff:ff:ff
|
|
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether f8:f2:1e:41:44:9d brd ff:ff:ff:ff:ff:ff
|
|
5: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
|
|
link/none
|
|
6: nf0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether 02:53:55:4d:45:00 brd ff:ff:ff:ff:ff:ff
|
|
7: nf1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether 02:53:55:4d:45:01 brd ff:ff:ff:ff:ff:ff
|
|
8: nf2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether 02:53:55:4d:45:02 brd ff:ff:ff:ff:ff:ff
|
|
9: nf3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether 02:53:55:4d:45:03 brd ff:ff:ff:ff:ff:ff
|
|
nico@nsg-System:~$
|
|
|
|
\end{verbatim}
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterB:netpfga-nftraffic}NetFPGA misses packets on nf*}
|
|
While the nf devices appear in the operating system, packets emitted
|
|
by the netpfga cannot be sniffed on the nf interfaces
|
|
directly. Instead one has to sniff packets on a physical network card
|
|
that is connected to the specific output port.
|
|
|
|
% ----------------------------------------------------------------------
|
|
\section{\label{chapterB:netpfga-kernelmodule}NetFPGA Kernel module}
|
|
|
|
%---------------------------------------------------------------------------------------------------------
|
|
\chapter{\label{benchmark}Benchmark Logs}
|
|
% ----------------------------------------------------------------------
|
|
|
|
\section{\label{benchmark:iperf}iperf}
|
|
Omitting startup time
|
|
|
|
\section{\label{benchmark:general}General}
|
|
|
|
MTU setting to 1500, as netpfga doesn't support jumbo frames
|
|
|
|
|
|
iperf3, iperf 3.0.11
|
|
|
|
50 parallel = 2x 100% cpu usage
|
|
40 parallel = 100%, 70% cpu usage
|
|
30 parallel = 70%-100, 70% cpu usage
|
|
|
|
Turning back on checksum offloading (see below)
|
|
|
|
30 parallel = 70%, 30% cpu usage
|
|
|
|
|
|
\begin{verbatim}
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 tx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: on
|
|
tx-checksum-ip-generic: on
|
|
tx-checksum-sctp: on
|
|
tcp-segmentation-offload: on
|
|
tx-tcp-segmentation: on
|
|
tx-tcp6-segmentation: on
|
|
root@ESPRIMO-P956:~#
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 tx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: on
|
|
tx-checksum-ip-generic: on
|
|
tx-checksum-sctp: on
|
|
tcp-segmentation-offload: on
|
|
tx-tcp-segmentation: on
|
|
tx-tcp6-segmentation: on
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 rx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~#
|
|
|
|
\end{verbatim}
|
|
|
|
Results into
|
|
|
|
\begin{verbatim}
|
|
|
|
root@ESPRIMO-P956:~# ethtool -k enp2s0f0
|
|
Features for enp2s0f0:
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
rx-checksumming: on
|
|
tx-checksumming: on
|
|
tx-checksum-ipv4: off [fixed]
|
|
tx-checksum-ip-generic: on
|
|
tx-checksum-ipv6: off [fixed]
|
|
tx-checksum-fcoe-crc: on [fixed]
|
|
tx-checksum-sctp: on
|
|
scatter-gather: on
|
|
tx-scatter-gather: on
|
|
tx-scatter-gather-fraglist: off [fixed]
|
|
tcp-segmentation-offload: on
|
|
tx-tcp-segmentation: on
|
|
tx-tcp-ecn-segmentation: off [fixed]
|
|
tx-tcp-mangleid-segmentation: off
|
|
tx-tcp6-segmentation: on
|
|
udp-fragmentation-offload: off
|
|
generic-segmentation-offload: on
|
|
generic-receive-offload: on
|
|
large-receive-offload: off
|
|
rx-vlan-offload: on
|
|
tx-vlan-offload: on
|
|
ntuple-filters: off
|
|
receive-hashing: on
|
|
highdma: on [fixed]
|
|
rx-vlan-filter: on
|
|
vlan-challenged: off [fixed]
|
|
tx-lockless: off [fixed]
|
|
netns-local: off [fixed]
|
|
tx-gso-robust: off [fixed]
|
|
tx-fcoe-segmentation: on [fixed]
|
|
tx-gre-segmentation: on
|
|
tx-gre-csum-segmentation: on
|
|
tx-ipxip4-segmentation: on
|
|
tx-ipxip6-segmentation: on
|
|
tx-udp_tnl-segmentation: on
|
|
tx-udp_tnl-csum-segmentation: on
|
|
tx-gso-partial: on
|
|
tx-sctp-segmentation: off [fixed]
|
|
tx-esp-segmentation: off [fixed]
|
|
fcoe-mtu: off [fixed]
|
|
tx-nocache-copy: off
|
|
loopback: off [fixed]
|
|
rx-fcs: off [fixed]
|
|
rx-all: off
|
|
tx-vlan-stag-hw-insert: off [fixed]
|
|
rx-vlan-stag-hw-parse: off [fixed]
|
|
rx-vlan-stag-filter: off [fixed]
|
|
l2-fwd-offload: off
|
|
hw-tc-offload: off
|
|
esp-hw-offload: off [fixed]
|
|
esp-tx-csum-hw-offload: off [fixed]
|
|
rx-udp_tunnel-port-offload: off
|
|
root@ESPRIMO-P956:~# ethtool -k enp2s0f1
|
|
Features for enp2s0f1:
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
rx-checksumming: on
|
|
tx-checksumming: on
|
|
tx-checksum-ipv4: off [fixed]
|
|
tx-checksum-ip-generic: on
|
|
tx-checksum-ipv6: off [fixed]
|
|
tx-checksum-fcoe-crc: on [fixed]
|
|
tx-checksum-sctp: on
|
|
scatter-gather: on
|
|
tx-scatter-gather: on
|
|
tx-scatter-gather-fraglist: off [fixed]
|
|
tcp-segmentation-offload: on
|
|
tx-tcp-segmentation: on
|
|
tx-tcp-ecn-segmentation: off [fixed]
|
|
tx-tcp-mangleid-segmentation: off
|
|
tx-tcp6-segmentation: on
|
|
udp-fragmentation-offload: off
|
|
generic-segmentation-offload: on
|
|
generic-receive-offload: on
|
|
large-receive-offload: off
|
|
rx-vlan-offload: on
|
|
tx-vlan-offload: on
|
|
ntuple-filters: off
|
|
receive-hashing: on
|
|
highdma: on [fixed]
|
|
rx-vlan-filter: on
|
|
vlan-challenged: off [fixed]
|
|
tx-lockless: off [fixed]
|
|
netns-local: off [fixed]
|
|
tx-gso-robust: off [fixed]
|
|
tx-fcoe-segmentation: on [fixed]
|
|
tx-gre-segmentation: on
|
|
tx-gre-csum-segmentation: on
|
|
tx-ipxip4-segmentation: on
|
|
tx-ipxip6-segmentation: on
|
|
tx-udp_tnl-segmentation: on
|
|
tx-udp_tnl-csum-segmentation: on
|
|
tx-gso-partial: on
|
|
tx-sctp-segmentation: off [fixed]
|
|
tx-esp-segmentation: off [fixed]
|
|
fcoe-mtu: off [fixed]
|
|
tx-nocache-copy: off
|
|
loopback: off [fixed]
|
|
rx-fcs: off [fixed]
|
|
rx-all: off
|
|
tx-vlan-stag-hw-insert: off [fixed]
|
|
rx-vlan-stag-hw-parse: off [fixed]
|
|
rx-vlan-stag-filter: off [fixed]
|
|
l2-fwd-offload: off
|
|
hw-tc-offload: off
|
|
esp-hw-offload: off [fixed]
|
|
esp-tx-csum-hw-offload: off [fixed]
|
|
rx-udp_tunnel-port-offload: off
|
|
root@ESPRIMO-P956:~#
|
|
|
|
\end{verbatim}
|
|
|
|
\section{\label{benchmark:netpfga}NetFPGA}
|
|
iperf3-tcp-listening-v4 connected by v6
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ iperf3 -p 2345 -4 -B 10.0.0.42 -s
|
|
-----------------------------------------------------------
|
|
Server listening on 2345
|
|
-----------------------------------------------------------
|
|
Accepted connection from 10.0.0.66, port 50900
|
|
[ 5] local 10.0.0.42 port 2345 connected to 10.0.0.66 port 50902
|
|
[ ID] Interval Transfer Bandwidth
|
|
[ 5] 0.00-1.00 sec 693 MBytes 5.81 Gbits/sec
|
|
[ 5] 1.00-2.00 sec 645 MBytes 5.41 Gbits/sec
|
|
[ 5] 2.00-3.00 sec 644 MBytes 5.40 Gbits/sec
|
|
[ 5] 3.00-4.00 sec 868 MBytes 7.28 Gbits/sec
|
|
[ 5] 4.00-5.00 sec 853 MBytes 7.16 Gbits/sec
|
|
[ 5] 5.00-6.00 sec 913 MBytes 7.66 Gbits/sec
|
|
[ 5] 6.00-7.00 sec 774 MBytes 6.49 Gbits/sec
|
|
[ 5] 7.00-8.00 sec 641 MBytes 5.38 Gbits/sec
|
|
[ 5] 8.00-9.00 sec 911 MBytes 7.64 Gbits/sec
|
|
[ 5] 9.00-10.00 sec 733 MBytes 6.15 Gbits/sec
|
|
[ 5] 10.00-10.04 sec 25.8 MBytes 5.38 Gbits/sec
|
|
- - - - - - - - - - - - - - - - - - - - - - - - -
|
|
[ ID] Interval Transfer Bandwidth Retr
|
|
[ 5] 0.00-10.04 sec 7.52 GBytes 6.43 Gbits/sec 14 sender
|
|
[ 5] 0.00-10.04 sec 7.52 GBytes 6.43 Gbits/sec receiver
|
|
-----------------------------------------------------------
|
|
Server listening on 2345
|
|
-----------------------------------------------------------
|
|
|
|
nico@ESPRIMO-P956:~$ iperf3 -6 -p 2345 -c 2001:db8:42::a00:2a
|
|
Connecting to host 2001:db8:42::a00:2a, port 2345
|
|
[ 4] local 2001:db8:42::42 port 50902 connected to 2001:db8:42::a00:2a port 2345
|
|
[ ID] Interval Transfer Bandwidth Retr Cwnd
|
|
[ 4] 0.00-1.00 sec 719 MBytes 6.03 Gbits/sec 10 449 KBytes
|
|
[ 4] 1.00-2.00 sec 645 MBytes 5.41 Gbits/sec 0 449 KBytes
|
|
[ 4] 2.00-3.00 sec 644 MBytes 5.40 Gbits/sec 0 449 KBytes
|
|
[ 4] 3.00-4.00 sec 878 MBytes 7.36 Gbits/sec 0 449 KBytes
|
|
[ 4] 4.00-5.00 sec 859 MBytes 7.20 Gbits/sec 0 449 KBytes
|
|
[ 4] 5.00-6.00 sec 910 MBytes 7.64 Gbits/sec 0 449 KBytes
|
|
[ 4] 6.00-7.00 sec 758 MBytes 6.36 Gbits/sec 0 449 KBytes
|
|
[ 4] 7.00-8.00 sec 658 MBytes 5.52 Gbits/sec 0 449 KBytes
|
|
[ 4] 8.00-9.00 sec 906 MBytes 7.60 Gbits/sec 4 449 KBytes
|
|
[ 4] 9.00-10.00 sec 724 MBytes 6.07 Gbits/sec 0 449 KBytes
|
|
- - - - - - - - - - - - - - - - - - - - - - - - -
|
|
[ ID] Interval Transfer Bandwidth Retr
|
|
[ 4] 0.00-10.00 sec 7.52 GBytes 6.46 Gbits/sec 14 sender
|
|
[ 4] 0.00-10.00 sec 7.52 GBytes 6.46 Gbits/sec receiver
|
|
|
|
iperf Done.
|
|
nico@ESPRIMO-P956:~$
|
|
|
|
\end{verbatim}
|
|
|
|
listening on v6, connecting from v4:
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ iperf3 -p 2345 -6 -B 2001:db8:42::42 -s
|
|
-----------------------------------------------------------
|
|
Server listening on 2345
|
|
-----------------------------------------------------------
|
|
Accepted connection from 2001:db8:42::a00:2a, port 47520
|
|
[ 5] local 2001:db8:42::42 port 2345 connected to 2001:db8:42::a00:2a port 47522
|
|
[ ID] Interval Transfer Bandwidth
|
|
[ 5] 0.00-1.00 sec 1.02 GBytes 8.73 Gbits/sec
|
|
[ 5] 1.00-2.00 sec 879 MBytes 7.38 Gbits/sec
|
|
[ 5] 2.00-3.00 sec 859 MBytes 7.20 Gbits/sec
|
|
[ 5] 3.00-4.00 sec 1.02 GBytes 8.78 Gbits/sec
|
|
[ 5] 4.00-5.00 sec 1.04 GBytes 8.89 Gbits/sec
|
|
[ 5] 5.00-6.00 sec 1.05 GBytes 9.00 Gbits/sec
|
|
[ 5] 6.00-7.00 sec 1.03 GBytes 8.89 Gbits/sec
|
|
[ 5] 7.00-8.00 sec 1.04 GBytes 8.91 Gbits/sec
|
|
[ 5] 8.00-9.00 sec 1.03 GBytes 8.84 Gbits/sec
|
|
[ 5] 9.00-10.00 sec 953 MBytes 7.99 Gbits/sec
|
|
[ 5] 10.00-10.04 sec 38.6 MBytes 7.81 Gbits/sec
|
|
- - - - - - - - - - - - - - - - - - - - - - - - -
|
|
[ ID] Interval Transfer Bandwidth Retr
|
|
[ 5] 0.00-10.04 sec 9.89 GBytes 8.46 Gbits/sec 151 sender
|
|
[ 5] 0.00-10.04 sec 9.89 GBytes 8.46 Gbits/sec receiver
|
|
-----------------------------------------------------------
|
|
Server listening on 2345
|
|
-----------------------------------------------------------
|
|
|
|
nico@ESPRIMO-P956:~$ iperf3 -4 -p 2345 -c 10.0.0.66
|
|
Connecting to host 10.0.0.66, port 2345
|
|
[ 4] local 10.0.0.42 port 47522 connected to 10.0.0.66 port 2345
|
|
[ ID] Interval Transfer Bandwidth Retr Cwnd
|
|
[ 4] 0.00-1.00 sec 1.06 GBytes 9.10 Gbits/sec 53 208 KBytes
|
|
[ 4] 1.00-2.00 sec 867 MBytes 7.27 Gbits/sec 6 379 KBytes
|
|
[ 4] 2.00-3.00 sec 870 MBytes 7.29 Gbits/sec 0 423 KBytes
|
|
[ 4] 3.00-4.00 sec 1.02 GBytes 8.77 Gbits/sec 37 364 KBytes
|
|
[ 4] 4.00-5.00 sec 1.04 GBytes 8.91 Gbits/sec 1 450 KBytes
|
|
[ 4] 5.00-6.00 sec 1.05 GBytes 8.98 Gbits/sec 0 462 KBytes
|
|
[ 4] 6.00-7.00 sec 1.04 GBytes 8.92 Gbits/sec 30 324 KBytes
|
|
[ 4] 7.00-8.00 sec 1.04 GBytes 8.88 Gbits/sec 0 471 KBytes
|
|
[ 4] 8.00-9.00 sec 1.03 GBytes 8.86 Gbits/sec 10 452 KBytes
|
|
[ 4] 9.00-10.00 sec 947 MBytes 7.94 Gbits/sec 14 409 KBytes
|
|
- - - - - - - - - - - - - - - - - - - - - - - - -
|
|
[ ID] Interval Transfer Bandwidth Retr
|
|
[ 4] 0.00-10.00 sec 9.89 GBytes 8.49 Gbits/sec 151 sender
|
|
[ 4] 0.00-10.00 sec 9.89 GBytes 8.49 Gbits/sec receiver
|
|
|
|
iperf Done.
|
|
nico@ESPRIMO-P956:~$
|
|
|
|
\end{verbatim}
|
|
% \section{\label{benchmark:bmv2}BMV2}
|
|
%---------------------------------------------------------------------------------------------------------
|
|
\section{\label{benchmark:tayga}Tayga}
|
|
|
|
|
|
\begin{verbatim}
|
|
ii tayga 0.9.2-6 amd64 userspace stateless NAT64
|
|
\end{verbatim}
|
|
|
|
Setting up IPv4 networking
|
|
|
|
\begin{verbatim}
|
|
[15:12] nsg-System:~# ip addr add 10.0.0.77/24 dev eth1
|
|
[15:12] nsg-System:~# ip l s eth1 up
|
|
|
|
nico@ESPRIMO-P956:~$ ~/master-thesis/bin/init_ipv4_esprimo.sh
|
|
nico@ESPRIMO-P956:~$ cat ~/master-thesis/bin/init_ipv4_esprimo.sh
|
|
#!/bin/sh
|
|
|
|
sudo ip addr add 10.0.0.42/24 dev enp2s0f0
|
|
sudo ip link set enp2s0f0 up
|
|
|
|
nico@ESPRIMO-P956:~$ sudo ip route add 10.0.1.0/24 via 10.0.0.77
|
|
|
|
\end{verbatim}
|
|
|
|
Verify networking works:
|
|
|
|
\begin{verbatim}
|
|
[15:12] nsg-System:~# ping 10.0.0.42
|
|
PING 10.0.0.42 (10.0.0.42) 56(84) bytes of data.
|
|
64 bytes from 10.0.0.42: icmp_seq=1 ttl=64 time=0.304 ms
|
|
64 bytes from 10.0.0.42: icmp_seq=2 ttl=64 time=0.097 ms
|
|
^C
|
|
--- 10.0.0.42 ping statistics ---
|
|
2 packets transmitted, 2 received, 0% packet loss, time 1011ms
|
|
rtt min/avg/max/mdev = 0.097/0.200/0.304/0.104 ms
|
|
[15:12] nsg-System:~#
|
|
|
|
\end{verbatim}
|
|
|
|
Setting up IPv6 networking
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ ip addr show dev enp2s0f1
|
|
13: enp2s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
|
|
link/ether f8:f2:1e:09:62:d1 brd ff:ff:ff:ff:ff:ff
|
|
inet6 2001:db8:42::42/64 scope global
|
|
valid_lft forever preferred_lft forever
|
|
inet6 fe80::faf2:1eff:fe09:62d1/64 scope link
|
|
valid_lft forever preferred_lft forever
|
|
nico@ESPRIMO-P956:~$ sudo ip route add 2001:db8:23::/96 via 2001:db8:42::77
|
|
|
|
[15:12] nsg-System:~# ip addr add 2001:db8:42::77/64 dev eth2
|
|
[15:15] nsg-System:~# ip link set eth2 up
|
|
|
|
\end{verbatim}
|
|
|
|
Verify IPv6 networking works:
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ ping6 -c2 2001:db8:42::77
|
|
PING 2001:db8:42::77(2001:db8:42::77) 56 data bytes
|
|
64 bytes from 2001:db8:42::77: icmp_seq=1 ttl=64 time=0.169 ms
|
|
64 bytes from 2001:db8:42::77: icmp_seq=2 ttl=64 time=0.153 ms
|
|
|
|
--- 2001:db8:42::77 ping statistics ---
|
|
2 packets transmitted, 2 received, 0% packet loss, time 1010ms
|
|
rtt min/avg/max/mdev = 0.153/0.161/0.169/0.008 ms
|
|
nico@ESPRIMO-P956:~$
|
|
|
|
\end{verbatim}
|
|
|
|
Enabling IPv6 and IPv4 forwarding:
|
|
|
|
\begin{verbatim}
|
|
[15:16] nsg-System:~# sysctl -w net.ipv6.conf.all.forwarding=1
|
|
net.ipv6.conf.all.forwarding = 1
|
|
|
|
[15:20] nsg-System:~# sysctl -w net.ipv4.ip_forward=1
|
|
net.ipv4.ip_forward = 1
|
|
|
|
\end{verbatim}
|
|
|
|
|
|
Testing NAT64 in tayga
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ ping -c2 10.0.1.42
|
|
PING 10.0.1.42 (10.0.1.42) 56(84) bytes of data.
|
|
64 bytes from 10.0.1.42: icmp_seq=1 ttl=61 time=0.356 ms
|
|
64 bytes from 10.0.1.42: icmp_seq=2 ttl=61 time=0.410 ms
|
|
|
|
--- 10.0.1.42 ping statistics ---
|
|
2 packets transmitted, 2 received, 0% packet loss, time 1019ms
|
|
rtt min/avg/max/mdev = 0.356/0.383/0.410/0.027 ms
|
|
nico@ESPRIMO-P956:~$
|
|
|
|
nico@ESPRIMO-P956:~$ sudo tcpdump -ni enp2s0f1
|
|
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
|
|
listening on enp2s0f1, link-type EN10MB (Ethernet), capture size 262144 bytes
|
|
15:21:39.851057 IP6 2001:db8:23::a00:2a > 2001:db8:42::42: ICMP6, echo request, seq 1, length 64
|
|
15:21:39.851124 IP6 2001:db8:42::42 > 2001:db8:23::a00:2a: ICMP6, echo reply, seq 1, length 64
|
|
15:21:40.870448 IP6 2001:db8:23::a00:2a > 2001:db8:42::42: ICMP6, echo request, seq 2, length 64
|
|
15:21:40.870507 IP6 2001:db8:42::42 > 2001:db8:23::a00:2a: ICMP6, echo reply, seq 2, length 64
|
|
^C
|
|
4 packets captured
|
|
4 packets received by filter
|
|
0 packets dropped by kernel
|
|
nico@ESPRIMO-P956:~$
|
|
|
|
\end{verbatim}
|
|
|
|
Testing NAT64 (v6 to v4)
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~$ ping6 -c2 2001:db8:23::a00:2a
|
|
PING 2001:db8:23::a00:2a(2001:db8:23::a00:2a) 56 data bytes
|
|
64 bytes from 2001:db8:23::a00:2a: icmp_seq=1 ttl=61 time=0.240 ms
|
|
64 bytes from 2001:db8:23::a00:2a: icmp_seq=2 ttl=61 time=0.400 ms
|
|
|
|
--- 2001:db8:23::a00:2a ping statistics ---
|
|
2 packets transmitted, 2 received, 0% packet loss, time 1003ms
|
|
rtt min/avg/max/mdev = 0.240/0.320/0.400/0.080 ms
|
|
nico@ESPRIMO-P956:~$
|
|
|
|
\end{verbatim}
|
|
|
|
\subsection{\label{benchmark:tayga:tcp}Tayga/TCP}
|
|
|
|
Tayga running at 100% cpu load,
|
|
|
|
v4->v6 tcp
|
|
delivering
|
|
3.36 gbit/s at P1
|
|
3.30 Gbit/s at P20
|
|
3.11 gbit/s at P50
|
|
|
|
v6->v4 tcp
|
|
P1: 3.02 Gbit/s
|
|
P20: 3.28 gbit/s
|
|
P50: 2.85 gbit/s
|
|
|
|
Commands:
|
|
|
|
\begin{verbatim}
|
|
|
|
Server always: iperf3 -6 -p 2345 -B 2001:db8:42::42 -s | tee iperf-tayga-v4tov6server-P50
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P1 -c 10.0.1.42 -T taygav4tov6tcpP1 | tee iperf-tayga-v4tov6server-client
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P20 -c 10.0.1.42 -T taygav4tov6tcpP20 | tee iperf-tayga-v4tov6server-client-P20
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P50 -c 10.0.1.42 -T taygav4tov6tcpP50 | tee iperf-tayga-v4tov6server-client-P50
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-tayga-v6tov4-server-P1
|
|
|
|
\end{verbatim}
|
|
|
|
|
|
Testing v6->v4
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-tayga-v6tov4-server-P20
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P1 -c 2001:db8:23::a00:2a -T taygav6tov4tcpP1 | tee iperf-tayga-v6tov4-client-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P20 -c 2001:db8:23::a00:2a -T taygav6tov4tcpP20 | tee iperf-tayga-v6tov4-client-P20
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P50 -c 2001:db8:23::a00:2a -T taygav6tov4tcpP50 | tee iperf-tayga-v6tov4-client-P50
|
|
|
|
\end{verbatim}
|
|
|
|
UDP v6->v4, again 100% cpu
|
|
|
|
P1: 5.81 gbit/s
|
|
P20: 9.40 gbit/s
|
|
P50: 19.6 gbits/sec
|
|
|
|
On the line only ca. 3600 mbit/s seen
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-tayga-v6tov4-server-udp-P1
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P1 -u -b10000m -c 2001:db8:23::a00:2a -T taygav6tov4tcpP50 | tee iperf-tayga-v6tov4-client-udp-P1
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P50 -u -b10000m -c 2001:db8:23::a00:2a -T taygav6tov4tcpP50 | tee iperf-tayga-v6tov4-client-udp-P50
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
Messsages from server:
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-tayga-v6tov4-server-udp-P1
|
|
iperf3: OUT OF ORDER - incoming packet = 198902 and received packet = 198904 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 441615 and received packet = 441617 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 441616 and received packet = 441618 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 567495 and received packet = 567501 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 567496 and received packet = 567501 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 567497 and received packet = 567501 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 567499 and received packet = 567503 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 567500 and received packet = 567503 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 567502 and received packet = 567503 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 631160 and received packet = 631164 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 631161 and received packet = 631164 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 631162 and received packet = 631165 AND SP = 5
|
|
iperf3: OUT OF ORDER - incoming packet = 631163 and received packet = 631165 AND SP = 5
|
|
|
|
\end{verbatim}
|
|
|
|
|
|
UDP v4->v6, again 100% cpu
|
|
|
|
P1: 8.26 gbit/s [atop: ~2500 Mbit/s per direction]
|
|
P20: 9.92 Gbits/sec [atop: ~2500 Mbit/s per direction]
|
|
P50: 19.3 gbit/s [atop: ~2500 Mbit/s per direction]
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -B 2001:db8:42::42 -s | tee iperf-tayga-v4tov6-server-udp-P1
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P1 -u -b0 -c 10.0.1.42 -T taygav4tov6udpP1 | tee iperf-tayga-v4tov6server-client-udp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P20 -u -b0 -c 10.0.1.42 -T taygav4tov6udpP20 | tee iperf-tayga-v4tov6server-client-udp-P20
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P50 -u -b0 -c 10.0.1.42 -T taygav4tov6udpP50 | tee iperf-tayga-v4tov6server-client-udp-P50
|
|
|
|
\end{verbatim}
|
|
|
|
%---------------------------------------------------------------------------------------------------------
|
|
|
|
\section{\label{benchmark:jool}Jool}
|
|
\subsection{\label{benchmark:jool:setup}Jool Setup}
|
|
|
|
Installation of 4.0.1 from \url{https://www.jool.mx/en/download.html}.
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~$ wget https://github.com/NICMx/Jool/releases/download/v4.0.1/jool_4.0.1.tar.gz
|
|
nico@nsg-System:~$ tar xvfz jool_4.0.1.tar.gz
|
|
nico@nsg-System:~$ cd jool-4.0.1/
|
|
nico@nsg-System:~/jool-4.0.1$ sudo apt install linux-headers-$(uname -r)
|
|
nico@nsg-System:~/jool-4.0.1$ sudo apt install libnl-genl-3-dev
|
|
|
|
\end{verbatim}
|
|
|
|
xtables cannot be found:
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/jool-4.0.1$ sudo apt install libxtables-dev
|
|
Reading package lists... Done
|
|
Building dependency tree
|
|
Reading state information... Done
|
|
E: Unable to locate package libxtables-dev
|
|
nico@nsg-System:~/jool-4.0.1$
|
|
|
|
\end{verbatim}
|
|
|
|
Does not compile without:
|
|
|
|
\begin{verbatim}
|
|
checking for library containing argp_parse... none required
|
|
checking for pkg-config... /usr/bin/pkg-config
|
|
checking pkg-config is at least version 0.9.0... yes
|
|
checking for LIBNLGENL3... yes
|
|
checking for XTABLES... no
|
|
configure: error: Package requirements (xtables) were not met:
|
|
|
|
No package 'xtables' found
|
|
|
|
Consider adjusting the PKG_CONFIG_PATH environment variable if you
|
|
installed software in a non-standard prefix.
|
|
|
|
Alternatively, you may set the environment variables XTABLES_CFLAGS
|
|
and XTABLES_LIBS to avoid the need to call pkg-config.
|
|
See the pkg-config man page for more details.
|
|
nico@nsg-System:~/jool-4.0.1$
|
|
|
|
\end{verbatim}
|
|
|
|
Trying different package:
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/jool-4.0.1$ sudo apt install iptables-dev
|
|
|
|
\end{verbatim}
|
|
|
|
Compiles!
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/jool-4.0.1$ sudo make install
|
|
|
|
\end{verbatim}
|
|
|
|
\subsection{\label{benchmark:jool:config}Jool Configuration}
|
|
|
|
Loading module:
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/jool-4.0.1$ sudo modprobe jool_siit
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
enabling forwarding:
|
|
\begin{verbatim}
|
|
sysctl -w net.ipv4.conf.all.forwarding=1
|
|
sysctl -w net.ipv6.conf.all.forwarding=1
|
|
\end{verbatim}
|
|
|
|
Mapping configuration:
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/jool-4.0.1$ sudo jool_siit instance add example --iptables --pool6 2001:db8:23::/96
|
|
|
|
nico@nsg-System:~/jool-4.0.1$ sudo ip6tables -t mangle -A PREROUTING \
|
|
-s 2001:db8:42::/64 -d 2001:db8:23::/96 -j JOOL_SIIT --instance example
|
|
|
|
nico@nsg-System:~/jool-4.0.1$ sudo iptables -t mangle -A PREROUTING \
|
|
-s 10.0.0.0/24 -j JOOL_SIIT --instance example
|
|
|
|
\end{verbatim}
|
|
|
|
|
|
|
|
Debugging:
|
|
|
|
\begin{verbatim}
|
|
[16:39] nsg-System:~# lsmod| grep jool
|
|
jool_siit 147456 2
|
|
x_tables 40960 5 jool_siit,ip6_tables,ip_tables,ip6table_mangle,iptable_mangle
|
|
[16:39] nsg-System:~#
|
|
|
|
[16:41] nsg-System:~# jool_siit -i example stats display --explain
|
|
JSTAT64_DST: 276
|
|
Translations cancelled: IPv6 packet's destination address did not match pool6 nor any EAMT entries, or the resulting address was blacklist4ed.
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
Try 2 w/ eamt:
|
|
|
|
\begin{verbatim}
|
|
[16:53] nsg-System:~# modprobe jool_siit
|
|
[16:54] nsg-System:~# jool_siit instance add "example" --iptables
|
|
[16:54] nsg-System:~# jool_siit -i example eamt add 2001:db8:42::/120 10.0.1.0/24
|
|
[16:55] nsg-System:~# jool_siit -i example eamt add 2001:db8:23::/120 10.0.0.0/24
|
|
[16:57] nsg-System:~# ip6tables -t mangle -A PREROUTING -s 2001:db8:42::/120 -d 2001:db8:23::/120 -j JOOL_SIIT --instance example
|
|
[16:57] nsg-System:~# iptables -t mangle -A PREROUTING -s 10.0.0.0/24 -d 10.0.1.0/24 -j JOOL_SIIT --instance example
|
|
[16:57] nsg-System:~#
|
|
|
|
\end{verbatim}
|
|
|
|
Testing NAT64:
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ ping6 2001:db8:23::2a
|
|
PING 2001:db8:23::2a(2001:db8:23::2a) 56 data bytes
|
|
64 bytes from 2001:db8:23::2a: icmp_seq=1 ttl=63 time=0.199 ms
|
|
64 bytes from 2001:db8:23::2a: icmp_seq=2 ttl=63 time=0.282 ms
|
|
64 bytes from 2001:db8:23::2a: icmp_seq=3 ttl=63 time=0.186 ms
|
|
^C
|
|
--- 2001:db8:23::2a ping statistics ---
|
|
3 packets transmitted, 3 received, 0% packet loss, time 2040ms
|
|
rtt min/avg/max/mdev = 0.186/0.222/0.282/0.044 ms
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ ping 10.0.1.66
|
|
PING 10.0.1.66 (10.0.1.66) 56(84) bytes of data.
|
|
64 bytes from 10.0.1.66: icmp_seq=1 ttl=63 time=0.218 ms
|
|
64 bytes from 10.0.1.66: icmp_seq=2 ttl=63 time=0.281 ms
|
|
64 bytes from 10.0.1.66: icmp_seq=3 ttl=63 time=0.280 ms
|
|
^C
|
|
--- 10.0.1.66 ping statistics ---
|
|
3 packets transmitted, 3 received, 0% packet loss, time 2051ms
|
|
rtt min/avg/max/mdev = 0.218/0.259/0.281/0.034 ms
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$
|
|
|
|
\end{verbatim}
|
|
|
|
|
|
\subsection{\label{benchmark:jool:benchmark}Jool Benchmarks}
|
|
|
|
v4->v6 tcp
|
|
|
|
P1: 8.24 gbit/s no cpu load visible
|
|
P20: 8.26 gbit/s iperf 42 + 10% cpu no cpu load visible
|
|
P50: 8.29 gbit/s
|
|
|
|
v6->v4 tcp
|
|
|
|
P1: 8.22
|
|
P20: 8.22 15/60% iperf
|
|
P50: 8.23 iperf: 73/16%
|
|
|
|
Commands:
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -B 2001:db8:42::42 -s | tee iperf-jool-v4tov6-server-tcp-P50
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P1 -c 10.0.1.66 | tee iperf-jool-v4tov6-client-tcp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P20 -c 10.0.1.66 | tee iperf-jool-v4tov6-client-tcp-P20
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P50 -c 10.0.1.66 | tee iperf-jool-v4tov6-client-tcp-P50
|
|
|
|
Other way:
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-jool-v6tov4-server-tcp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P1 -c 2001:db8:23::2a | tee iperf-jool-v6tov4-client-tcp-P1
|
|
|
|
...
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P1 -b0 -u -c 2001:db8:23::2a | tee iperf-jool-v6tov4-client-tcp-P1
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
|
|
v4->v6 udp
|
|
|
|
P1: 4.46 iperf 30% cpu nat64: 100% cpu
|
|
P20: 18.8 iperf 100% nat64: 100%
|
|
P50: 22.8 iperf 100% nat64: 100% atop: ca. 5gbit/s
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -B 2001:db8:42::42 -s | tee iperf-jool-v4tov6-server-udp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P1 -c 10.0.1.66 -u -b0 | tee iperf-jool-v4tov6-client-udp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P20 -c 10.0.1.66 -u -b0 | tee iperf-jool-v4tov6-client-udp-P20
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
v6->v4 udp
|
|
|
|
P1: 6.67 gbit/s iperf 50/50%, nat64: 100% cpu!
|
|
P20: 16.8 nat64: iperf: ? 100% cpu
|
|
P50: 20.5 Gbits/sec nat64: 100% (1 core) iperf: 100%/50% atop: 7000mbit/s in / out
|
|
|
|
\begin{verbatim}
|
|
|
|
\end{verbatim}
|
|
|
|
Turning off offloading, redoing tcp:
|
|
|
|
\begin{verbatim}
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 gso off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 rx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 tx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: off
|
|
tx-checksum-ip-generic: off
|
|
tx-checksum-sctp: off
|
|
tcp-segmentation-offload: off
|
|
tx-tcp-segmentation: off [requested on]
|
|
tx-tcp6-segmentation: off [requested on]
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 tx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: off
|
|
tx-checksum-ip-generic: off
|
|
tx-checksum-sctp: off
|
|
tcp-segmentation-offload: off
|
|
tx-tcp-segmentation: off [requested on]
|
|
tx-tcp6-segmentation: off [requested on]
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 rx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 gso off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~#
|
|
|
|
[17:26] nsg-System:~# ethtool -K eth1 tx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: off
|
|
tx-checksum-ip-generic: off
|
|
tx-checksum-sctp: off
|
|
tcp-segmentation-offload: off
|
|
tx-tcp-segmentation: off [requested on]
|
|
tx-tcp6-segmentation: off [requested on]
|
|
[17:26] nsg-System:~# ethtool -K eth1 gso off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
[17:26] nsg-System:~# ethtool -K eth2 gso off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
[17:26] nsg-System:~# ethtool -K eth2 rx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
[17:26] nsg-System:~# ethtool -K eth2 tx off
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: off
|
|
tx-checksum-ip-generic: off
|
|
tx-checksum-sctp: off
|
|
tcp-segmentation-offload: off
|
|
tx-tcp-segmentation: off [requested on]
|
|
tx-tcp6-segmentation: off [requested on]
|
|
[17:26] nsg-System:~#
|
|
|
|
\end{verbatim}
|
|
|
|
Retesting using -P50:
|
|
|
|
Still no cpu load with tcp, 100% cpu load iperf
|
|
|
|
result: 7.96 gbit/s
|
|
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-jool-v6tov4-server-tcp-P50-no-offload
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P50 -c 2001:db8:23::2a | tee iperf-jool-v6tov4-client-tcp-P50-no-offload
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P20 -u -b0 -c 10.0.0.66 | tee iperf-netpfga-v4tov6-client-udp-P20
|
|
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-netfpga-v6tov4-server-tcp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P1 -c 2001:db8:42::a00:2a | tee iperf-netfpga-v6tov4-client-tcp-P1
|
|
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -B 10.0.0.42 -s | tee iperf-netfpga-v6tov4-server-udp-P1
|
|
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -6 -p 2345 -t 70 -O 10 -P1 -b0 -u -c 2001:db8:42::a00:2a | tee iperf-netfpga-v6tov4-client-udp-P1
|
|
|
|
\end{verbatim}
|
|
|
|
\subsection{\label{benchmark:netfpga:benchmark}NetPFGA Benchmarks}
|
|
|
|
Only 1 test did have offloading on esprimo off, was redone
|
|
|
|
v4->v6 tcp
|
|
|
|
P1: 7.41 gbit/s iperf 50% / 20%
|
|
P1-offload-on-esprimo: 8.43 gbit/s
|
|
P20: 9.29 gbit/s iperf: 66/20%
|
|
P50: 9.29 gbit/s 84/42% iperf
|
|
|
|
v4->v6 udp
|
|
|
|
P1: 7.4gbit/s 100% iperf
|
|
P20: 17.7gbit/s iperf 100% atop: ca. 9800 Mbit/s
|
|
P50: 21.5 gbit/s iperf 100% ca. 9800 Mbit/s
|
|
|
|
|
|
v6->v4 tcp
|
|
|
|
P1: 9.28 gbit/s atop ~9800 mbit/s iperf 44%
|
|
P20: 9.29 gbit/s atop ~9800 mbit/s iperf 70%
|
|
P50: 9.29 gbit/s atop ~9800 mbit/s iperf 90%
|
|
|
|
v6->v4 udp
|
|
|
|
P1: 7.96 gbit/s atop ~8200mbit/s iperf 70%
|
|
P20: 13.4 gbit/s atop 9800 mbit/s iperf 100%
|
|
P50: 19.0 gbit/s atop 9800 mbit/s iperf 100%
|
|
|
|
|
|
|
|
Commands:
|
|
\begin{verbatim}
|
|
nico@ESPRIMO-P956:~/master-thesis/iperf$ iperf3 -4 -p 2345 -t 70 -O 10 -P1 -u -b0 -c 10.0.0.66 | tee iperf-netpfga-v4tov6-client-udp-P1
|
|
|
|
\end{verbatim}
|
|
|
|
After first netpfga, tcp v4->v6 p1 turned offloading on again
|
|
|
|
\begin{verbatim}
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 tx-checksum-ipv6 on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Could not change any device features
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 tx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: on
|
|
tx-checksum-ip-generic: on
|
|
tx-checksum-sctp: on
|
|
tcp-segmentation-offload: on
|
|
tx-tcp-segmentation: on
|
|
tx-tcp6-segmentation: on
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 rx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f1 gso on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 gso on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 tx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Actual changes:
|
|
tx-checksumming: on
|
|
tx-checksum-ip-generic: on
|
|
tx-checksum-sctp: on
|
|
tcp-segmentation-offload: on
|
|
tx-tcp-segmentation: on
|
|
tx-tcp6-segmentation: on
|
|
root@ESPRIMO-P956:~# ethtool -K enp2s0f0 rx on
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
Cannot get device udp-fragmentation-offload settings: Operation not supported
|
|
root@ESPRIMO-P956:~#
|
|
|
|
\end{verbatim}
|
|
|
|
%Entries for the list of abbrevations:
|
|
%
|
|
%To generate the list of abbrevations, execute:
|
|
%makeindex Thesis.nlo -s nomencl.ist -o Thesis.nls
|
|
%
|
|
%If you are using TeXniCenter, specify:
|
|
%"%bm.nlo" -s nomencl.ist -o "%bm.nls"
|
|
%as beeing the argument list for makeindex.
|
|
|
|
%---------------------------------------------------------------------------------------------------------
|
|
|
|
\chapter{\label{bufferssssss}Buffer}
|
|
|
|
\section{NetFPGA compile errors}
|
|
|
|
- infinite loop in installer
|
|
|
|
\begin{verbatim}
|
|
# Fix introduced for SDNet 2017.4
|
|
sed -i 's/xsim\.dir\/xsc\/dpi\.so/dpi\.so/g' nf_sume_sdnet_ip/SimpleSumeSwitch/vivado_sim.bash
|
|
sed -i 's/xsim\.dir\/xsc\/dpi\.so/dpi\.so/g' nf_sume_sdnet_ip/SimpleSumeSwitch/vivado_sim_waveform.bash
|
|
# Fix introduced for SDNet 2018.2
|
|
sed -i 's/glbl_sim/glbl/g' nf_sume_sdnet_ip/SimpleSumeSwitch/vivado_sim_waveform.bash
|
|
sed -i 's/SimpleSumeSwitch_tb_sim#work.glbl/SimpleSumeSwitch_tb/g' nf_sume_sdnet_ip/SimpleSumeSwitch/vivado_sim_waveform.bash
|
|
cp src/*.tbl nf_sume_sdnet_ip/SimpleSumeSwitch/
|
|
cp: cannot stat 'src/*.tbl': No such file or directory
|
|
make: *** [Makefile:23: cpp_test] Error 1
|
|
[23:12] loch:minip4%
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
ERROR: [XSIM 43-3409] Failed to compile generated C file xsim.dir/work.SimpleSumeSwitch_tb#work.glbl/obj/xsim_3.c.
|
|
ERROR: [XSIM 43-3915] Encountered a fatal error. Cannot continue. Exiting...
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
/opt/Xilinx/Vivado/2018.2/data/../tps/llvm/3.1/lnx64.o/bin/clang -fPIC -c -std=gnu89 -nobuiltininc -nostdinc++ -w -Wl,--unres
|
|
olved-symbols=ignore-in-object-files -fbracket-depth=1048576 -I/opt/Xilinx/Vivado/2018.2/data/../tps/llvm/3.1/lnx64.o/bin/../li
|
|
b/clang/3.1/include -fPIC -m64 -I"/opt/Xilinx/Vivado/2018.2/data/xsim/include" "xsim.dir/work.SimpleSumeSwitch_tb#work.glbl/ob
|
|
j/xsim_3.c" -O0 -sim -o "xsim.dir/work.SimpleSumeSwitch_tb#work.glbl/obj/xsim_3.lnx64.o" -DXILINX_SIMULATOR
|
|
/opt/Xilinx/Vivado/2018.2/data/../tps/llvm/3.1/lnx64.o/bin/clang: error while loading shared libraries: libncurses.so.5: cannot
|
|
open shared object file: No such file or directory
|
|
ERROR: [XSIM 43-3409] Failed to compile generated C file xsim.dir/work.SimpleSumeSwitch_tb#work.glbl/obj/xsim_3.c.
|
|
ERROR: [XSIM 43-3915] Encountered a fatal error. Cannot continue. Exiting...
|
|
[20:00] rainbow:SimpleSumeSwitch%
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
# Fix introduced for SDNet 2018.2
|
|
sed -i 's/glbl_sim/glbl/g' nf_sume_sdnet_ip/SimpleSumeSwitch/vivado_sim_waveform.bash
|
|
sed -i 's/SimpleSumeSwitch_tb_sim#work.glbl/SimpleSumeSwitch_tb/g' nf_sume_sdnet_ip/SimpleSumeSwitch/vivado_sim_waveform.bash
|
|
cp src/*.tbl nf_sume_sdnet_ip/SimpleSumeSwitch/
|
|
cp testdata/*.txt nf_sume_sdnet_ip/SimpleSumeSwitch/
|
|
cp: cannot stat 'testdata/*.txt': No such file or directory
|
|
make: *** [Makefile:17: all] Error 1
|
|
[15:46] rainbow:minip4%
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
make -C testdata/
|
|
make[1]: Entering directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata'
|
|
./gen_testdata.py
|
|
/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/bin/pcap2axi --output Packet_in.axi --bus_width 256 src.pcap
|
|
Traceback (most recent call last):
|
|
File "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/bin/pcap2axi", line 108, in <module>
|
|
write_to_file(args.file_pcap, args.output)
|
|
File "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/bin/pcap2axi", line 88, in write_to_file
|
|
for pkt in rdpcap(file_in):
|
|
File "/usr/lib/python2.7/dist-packages/scapy/utils.py", line 728, in rdpcap
|
|
with PcapReader(filename) as fdesc:
|
|
File "/usr/lib/python2.7/dist-packages/scapy/utils.py", line 751, in __call__
|
|
filename, fdesc, magic = cls.open(filename)
|
|
File "/usr/lib/python2.7/dist-packages/scapy/utils.py", line 778, in open
|
|
fdesc = open(filename, "rb")
|
|
IOError: [Errno 2] No such file or directory: 'src.pcap'
|
|
make[1]: *** [Makefile:5: all] Error 1
|
|
make[1]: Leaving directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata'
|
|
make: *** [Makefile:32: frontend] Error 2
|
|
[15:47] rainbow:minip4%
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
update_compile_order: Time (s): cpu = 00:00:17 ; elapsed = 00:00:09 . Memory (MB): peak = 1995.594 ; gain = 0.016 ; free physic
|
|
al = 21975 ; free virtual = 33161
|
|
loading libsume..
|
|
Traceback (most recent call last):
|
|
File "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_de
|
|
fault/run.py", line 42, in <module>
|
|
import config_writes
|
|
File "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_de
|
|
fault/config_writes.py", line 7
|
|
|
|
^
|
|
IndentationError: expected an indented block
|
|
while executing
|
|
"exec python $::env(NF_DESIGN_DIR)/test/${test_name}/run.py"
|
|
invoked from within
|
|
"set output [exec python $::env(NF_DESIGN_DIR)/test/${test_name}/run.py]"
|
|
(file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/tcl/simple_s
|
|
ume_switch_sim.tcl" line 177)
|
|
INFO: [Common 17-206] Exiting Vivado at Sat May 18 15:21:21 2019...
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/dma_0_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/dma_0_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/reg_stim.log': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/reg_expect.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/reg_stim.axi': No such file or directory
|
|
=== Running test /tmp/nico/test/simple_sume_switch/sim_switch_default ... using cmd ['/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default/run.py', '--sim', 'xsim']
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
# add_wave $nf_sume_sdnet_ip/out_src_port
|
|
# add_wave $nf_sume_sdnet_ip/out_dst_port
|
|
# set const_reg_ip /top_tb/top_sim/nf_datapath_0/nf_sume_sdnet_wrapper_1/inst/SimpleSumeSwitch_inst/const_reg_rw_0/
|
|
# add_wave_divider {const reg extern signals}
|
|
# add_wave $const_reg_ip
|
|
ERROR: [Wavedata 42-471] Note: Nothing was found for the following items: /top_tb/top_sim/nf_datapath_0/nf_sume_sdnet_wrapper_1/inst/SimpleSumeSwitch_inst/const_reg_rw_0/
|
|
ERROR: [Common 17-39] 'add_wave' failed due to earlier errors.
|
|
|
|
while executing
|
|
"add_wave $const_reg_ip "
|
|
(file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/tcl/simple_sume_switch_sim.tcl" line 328)
|
|
INFO: [Common 17-206] Exiting Vivado at Sat May 18 15:31:59 2019...
|
|
make: *** [Makefile:121: sim] Error 1
|
|
make: Leaving directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test'
|
|
512
|
|
=== Work directory is /tmp/nico/test/simple_sume_switch
|
|
=== Setting up test in /tmp/nico/test/simple_sume_switch/sim_switch_default
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/dma_0_log.axi': No such file or directory
|
|
=== Running test /tmp/nico/test/simple_sume_switch/sim_switch_default ... using cmd ['/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default/run.py', '--sim', 'xsim']
|
|
[15:31] rainbow:P4-NetFPGA%
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
ERROR: [BD 41-171] The modes of the interface pins 'cfg_interrupt'(Slave) and 'pcie3_cfg_interrupt'(Slave) are incompatible. They cannot be connected.
|
|
ERROR: [BD 5-3] Error: running connect_bd_intf_net.
|
|
ERROR: [Common 17-39] 'connect_bd_intf_net' failed due to earlier errors.
|
|
|
|
while executing
|
|
"connect_bd_intf_net -intf_net nf_riffa_dma_1_pcie3_cfg_interrupt [get_bd_intf_pins nf_riffa_dma_1/cfg_interrupt] [get_bd_intf_pins pcie3_7x_1/pcie3_cf..."
|
|
(procedure "create_hier_cell_dma_sub" line 141)
|
|
invoked from within
|
|
"create_hier_cell_dma_sub [current_bd_instance .] dma_sub"
|
|
(procedure "create_root_design" line 68)
|
|
invoked from within
|
|
"create_root_design """
|
|
(file "./tcl/control_sub.tcl" line 729)
|
|
|
|
while executing
|
|
"source ./tcl/control_sub.tcl"
|
|
(file "tcl/simple_sume_switch.tcl" line 89)
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
|
|
### set NF_10G_INTERFACE3_BASEADDR $M07_BASEADDR
|
|
### set NF_10G_INTERFACE3_HIGHADDR $M07_HIGHADDR
|
|
### set NF_10G_INTERFACE3_SIZEADDR $M07_SIZEADDR
|
|
### set NF_RIFFA_DMA_BASEADDR $M08_BASEADDR
|
|
### set NF_RIFFA_DMA_HIGHADDR $M08_HIGHADDR
|
|
### set NF_RIFFA_DMA_SIZEADDR $M08_SIZEADDR
|
|
Wrote : </home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/bd/control_sub/control_sub.bd>
|
|
# create_ip -name nf_sume_sdnet -vendor NetFPGA -library NetFPGA -module_name nf_sume_sdnet_ip
|
|
ERROR: [Coretcl 2-1134] No IP matching VLNV 'NetFPGA:NetFPGA:nf_sume_sdnet:*' was found. Please check your repository configuration.
|
|
INFO: [Common 17-206] Exiting Vivado at Sat May 25 11:52:01 2019...
|
|
|
|
\end{verbatim}
|
|
\begin{verbatim}
|
|
# set_property compxlib.xsim_compiled_library_dir {} [current_project] [0/1819]
|
|
# set_property top_lib xil_defaultlib [get_filesets sim_1]
|
|
# update_compile_order -fileset sim_1
|
|
update_compile_order: Time (s): cpu = 00:00:17 ; elapsed = 00:00:09 . Memory (MB): peak = 2003.578 ; gain = 8.004 ; free physical = 27661 ; free virtual = 33990
|
|
loading libsume..
|
|
Traceback (most recent call last):
|
|
File "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default/run.py", line 42, in <module>
|
|
import config_writes
|
|
File "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default/config_writes.py", line 7
|
|
|
|
^
|
|
IndentationError: expected an indented block
|
|
while executing
|
|
"exec python $::env(NF_DESIGN_DIR)/test/${test_name}/run.py"
|
|
invoked from within
|
|
"set output [exec python $::env(NF_DESIGN_DIR)/test/${test_name}/run.py]"
|
|
(file "/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/tcl/simple_sume_switch_sim.tcl" line 177)
|
|
INFO: [Common 17-206] Exiting Vivado at Sat May 25 13:45:13 2019...
|
|
make: *** [Makefile:121: sim] Error 1
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
[SW] CAM_EnableDevice() - done
|
|
[2420698] INFO: finished packet stimulus file
|
|
[2735572] ERROR: tuple mismatch for packet 1
|
|
expected < tuple_out_digest_data, tuple_out_sume_metadata > = < 0000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000001010000 >
|
|
actual < tuple_out_digest_data, tuple_out_sume_metadata > = < 0000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000010000 >
|
|
$finish called at time : 2735572 ps : File
|
|
"/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/nf_sume_sdnet_ip/SimpleSumeSwitch/Testbench/Check.v"
|
|
Line 120
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
[14:54] rainbow:bitfiles% cd $NF_DESIGN_DIR/bitfiles/ && sudo bash ./program_switch.sh
|
|
./program_switch.sh: line 34: /tools/program_switch.sh: No such file or directory
|
|
[14:56] rainbow:bitfiles% ls
|
|
config_writes.sh minip4.bit program_switch.sh README
|
|
[14:56] rainbow:bitfiles%
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
root@rainbow:~/master-thesis/netpfga/minip4/sw/hw_test_tool# python switch_calc_tester.py
|
|
SIOCSIFADDR: No such device
|
|
eth1: ERROR while getting interface flags: No such device
|
|
SIOCSIFNETMASK: No such device
|
|
tcpdump: eth1: No such device exists
|
|
(SIOCGIFHWADDR: No such device)
|
|
The HW testing tool for the switch_calc design
|
|
type help to see all commands
|
|
testing>
|
|
\end{verbatim}
|
|
|
|
\label{netpfgaioctlerror}
|
|
\begin{verbatim}
|
|
>> table_cam_add_entry lookup_table send_to_port1 ff:ff:ff:ff:ff:ff =>
|
|
CAM_Init_ValidateContext() - done
|
|
WROTE 0x44020050 = 0xffffffff
|
|
WROTE 0x44020054 = 0xffff
|
|
WROTE 0x44020080 = 0x0003
|
|
python: ioctl: Unknown error 512
|
|
[20:27] rainbow:CLI%
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
[7:05] rainbow:netpfga% bash build-load-drivers.sh
|
|
+ cd /home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0
|
|
+ make all
|
|
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
|
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
|
Building modules, stage 2.
|
|
MODPOST 1 modules
|
|
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
|
+ sudo make install
|
|
make -C /lib/modules/5.0.0-16-generic/build M=/home/nico/projects/P4-NetFPGA/lib/sw/std/driver/sume_riffa_v1_0_0 modules
|
|
make[1]: Entering directory '/usr/src/linux-headers-5.0.0-16-generic'
|
|
Building modules, stage 2.
|
|
MODPOST 1 modules
|
|
make[1]: Leaving directory '/usr/src/linux-headers-5.0.0-16-generic'
|
|
install -o root -g root -m 0755 -d /lib/modules/5.0.0-16-generic/extra/sume_riffa/
|
|
install -o root -g root -m 0755 sume_riffa.ko /lib/modules/5.0.0-16-generic/extra/sume_riffa/
|
|
depmod -a 5.0.0-16-generic
|
|
+ sudo modprobe sume_riffa
|
|
modprobe: ERROR: could not insert 'sume_riffa': Exec format error
|
|
[7:06] rainbow:netpfga%
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
java traceback when trying to install sdnet
|
|
#+BEGIN_CENTER
|
|
Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: Window must not be zero
|
|
at java.desktop/sun.awt.X11.XAtom.checkWindow(Unknown Source)
|
|
at java.desktop/sun.awt.X11.XAtom.getAtomData(Unknown Source)
|
|
at java.desktop/sun.awt.X11.XToolkit.getWorkArea(Unknown Source)
|
|
at java.desktop/sun.awt.X11.XToolkit.getInsets(Unknown Source)
|
|
at java.desktop/sun.awt.X11.XToolkit.getScreenInsets(Unknown Source)
|
|
at java.desktop/java.awt.Window.init(Unknown Source)
|
|
at java.desktop/java.awt.Window.<init>(Unknown Source)
|
|
at java.desktop/java.awt.Window.<init>(Unknown Source)
|
|
at java.desktop/java.awt.Dialog.<init>(Unknown Source)
|
|
at java.desktop/java.awt.Dialog.<init>(Unknown Source)
|
|
at java.desktop/javax.swing.JDialog.<init>(Unknown Source)
|
|
at java.desktop/javax.swing.JOptionPane.createDialog(Unknown Source)
|
|
at java.desktop/javax.swing.JOptionPane.createDialog(Unknown Source)
|
|
at j.a.c(Unknown Source)
|
|
at j.a.a(Unknown Source)
|
|
at j.a.a(Unknown Source)
|
|
at j.a.c(Unknown Source)
|
|
at com.xilinx.installer.gui.panel.destination.b.a(Unknown Source)
|
|
at com.xilinx.installer.gui.panel.destination.DestinationPanel.z(Unknown Source)
|
|
at com.xilinx.installer.gui.E.a(Unknown Source)
|
|
at com.xilinx.installer.gui.InstallerGUI.l(Unknown Source)
|
|
at com.xilinx.installer.gui.i.actionPerformed(Unknown Source)
|
|
at java.desktop/javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
|
|
at java.desktop/javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
|
|
at java.desktop/javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
|
|
at java.desktop/javax.swing.DefaultButtonModel.setPressed(Unknown Source)
|
|
at java.desktop/javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
|
|
at java.desktop/java.awt.Component.processMouseEvent(Unknown Source)
|
|
at java.desktop/javax.swing.JComponent.processMouseEvent(Unknown Source)
|
|
at java.desktop/java.awt.Component.processEvent(Unknown Source)
|
|
at java.desktop/java.awt.Container.processEvent(Unknown Source)
|
|
at java.desktop/java.awt.Component.dispatchEventImpl(Unknown Source)
|
|
at java.desktop/java.awt.Container.dispatchEventImpl(Unknown Source)
|
|
at java.desktop/java.awt.Component.dispatchEvent(Unknown Source)
|
|
at java.desktop/java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
|
|
at java.desktop/java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
|
|
at java.desktop/java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
|
|
at java.desktop/java.awt.Container.dispatchEventImpl(Unknown Source)
|
|
at java.desktop/java.awt.Window.dispatchEventImpl(Unknown Source)
|
|
at java.desktop/java.awt.Component.dispatchEvent(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue.dispatchEventImpl(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue.access$500(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue$3.run(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue$3.run(Unknown Source)
|
|
at java.base/java.security.AccessController.doPrivileged(Native Method)
|
|
at java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
|
|
at java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue$4.run(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue$4.run(Unknown Source)
|
|
at java.base/java.security.AccessController.doPrivileged(Native Method)
|
|
at java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
|
|
at java.desktop/java.awt.EventQueue.dispatchEvent(Unknown Source)
|
|
at java.desktop/java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
|
|
at java.desktop/java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
|
|
at java.desktop/java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
|
|
at java.desktop/java.awt.EventDispatchThread.pumpEvents(Unknown Source)
|
|
at java.desktop/java.awt.EventDispatchThread.pumpEvents(Unknown Source)
|
|
at java.desktop/java.awt.EventDispatchThread.run(Unknown Source)
|
|
|
|
|
|
#+END_CENTER
|
|
|
|
Reason was a hidden window.
|
|
|
|
\end{verbatim}
|
|
|
|
Testing the card
|
|
\begin{verbatim}
|
|
---------------------------------------------
|
|
[ddr3B]: Running Auto Test
|
|
---------------------------------------------
|
|
Traceback (most recent call last):
|
|
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
|
|
lambda event: event.callable(*event.args, **event.kw) )
|
|
File "sw/host/script/NfSumeTest.py", line 848, in UpdateProgress
|
|
self.progressDlg.Update(self.curProgress, str(localLine))
|
|
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16710, in __getattr__
|
|
raise PyDeadObjectError(self.attrStr % self._name)
|
|
wx._core.PyDeadObjectError: The C++ part of the NfSumeProgress object has been deleted, attribute access no longer allowed.
|
|
Exception in thread Thread-18:
|
|
Traceback (most recent call last):
|
|
File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
|
|
self.run()
|
|
File "sw/host/script/NfSumeTest.py", line 947, in run
|
|
self.target(*self.data)
|
|
File "sw/host/script/NfSumeTest.py", line 355, in StartAutoTest
|
|
self.TestInterface(testName)
|
|
File "sw/host/script/NfSumeTest.py", line 465, in TestInterface
|
|
self.ProgramFpga('../../../bitfiles/' + self.nfSumeTestConfiguration[testName]['bitstream'])
|
|
File "sw/host/script/NfSumeTest.py", line 586, in ProgramFpga
|
|
self.getFpgaIndex()
|
|
File "sw/host/script/NfSumeTest.py", line 574, in getFpgaIndex
|
|
p = Popen(['djtgcfg', 'init', '-d', 'NetSUME'], stdout=PIPE, bufsize = 1)
|
|
File "/usr/lib/python2.7/subprocess.py", line 711, in __init__
|
|
errread, errwrite)
|
|
File "/usr/lib/python2.7/subprocess.py", line 1343, in _execute_child
|
|
raise child_exception
|
|
OSError: [Errno 2] No such file or directory
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
---------------------------------------------
|
|
[pcie]: Running Auto Test
|
|
---------------------------------------------
|
|
Traceback (most recent call last):
|
|
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
|
|
lambda event: event.callable(*event.args, **event.kw) )
|
|
File "sw/host/script/NfSumeTest.py", line 848, in UpdateProgress
|
|
self.progressDlg.Update(self.curProgress, str(localLine))
|
|
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16710, in __getattr__
|
|
raise PyDeadObjectError(self.attrStr % self._name)
|
|
wx._core.PyDeadObjectError: The C++ part of the NfSumeProgress object has been deleted, attribute access no longer allowed.
|
|
Exception in thread Thread-21:
|
|
Traceback (most recent call last):
|
|
File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
|
|
self.run()
|
|
File "sw/host/script/NfSumeTest.py", line 947, in run
|
|
self.target(*self.data)
|
|
File "sw/host/script/NfSumeTest.py", line 466, in TestInterface
|
|
self.serialCon.readlines()
|
|
File "/usr/lib/python2.7/dist-packages/serial/serialposix.py", line 495, in read
|
|
raise SerialException('device reports readiness to read but returned no data (device disconnected or multiple access on port?)')
|
|
SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
Another generated file problem:
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/master-thesis/netpfga$ grep -i error $P4_PROJECT_DIR/nf_sume_sdnet_ip/SimpleSumeSwitch/LOG
|
|
ERROR: [VRFC 10-1491] unexpected EOF [/home/nico/master-thesis/netpfga/minip4/nf_sume_sdnet_ip/SimpleSumeSwitch/S_CONTROLLERs.HDL/S_CONTROLLER_SimpleSumeSwitch.vp:37]
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_0_ErrorCheck
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_1_ErrorCheck
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_2_ErrorCheck
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_3_ErrorCheck
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_4_ErrorCheck
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_5_ErrorCheck
|
|
INFO: [VRFC 10-311] analyzing module TopDeparser_t_EngineStage_6_ErrorCheck
|
|
|
|
\end{verbatim}
|
|
|
|
function syntax not supported
|
|
\begin{verbatim}
|
|
make[1]: Entering directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/src'
|
|
p4c-sdnet -o minip4.sdnet --sdnet_info .sdnet_switch_info.dat minip4_solution.p4
|
|
headers.p4(246):syntax error, unexpected IDENTIFIER, expecting (
|
|
bit<16> ones_complement_sum
|
|
^^^^^^^^^^^^^^^^^^^
|
|
error: 1 errors encountered, aborting compilation
|
|
Makefile:34: recipe for target 'all' failed
|
|
make[1]: *** [all] Error 1
|
|
make[1]: Leaving directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/src'
|
|
Makefile:31: recipe for target 'frontend' failed
|
|
make: *** [frontend] Error 2
|
|
nico@nsg-System:~/master-thesis/netpfga$
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default$ cd $NF_DESIGN_DIR/test/sim_switch_default && make 2>&1 | tee ~/master-thesis/netpfga/log/step8-$(date +%F-%H%M%S)
|
|
rm -f config_writes.py*
|
|
rm -f *.pyc
|
|
cp /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata/config_writes.py ./
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/testdata/config_writes.py': No such file or directory
|
|
Makefile:36: recipe for target 'all' failed
|
|
make: *** [all] Error 1
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
Finished scanning sources
|
|
INFO: [IP_Flow 19-234] Refreshing IP repositories
|
|
INFO: [IP_Flow 19-1700] Loaded user IP repository '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/ip_repo'.
|
|
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx/Vivado/2018.2/data/ip'.
|
|
WARNING: [IP_Flow 19-3664] IP 'bd_7ad4_xpcs_0' generated file not found '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/.Xil/Vivado-26302-nsg-System/coregen/bd_7ad4_xpcs_0_1/elaborate/configure_gt.tcl'. Please regenerate to continue.
|
|
WARNING: [IP_Flow 19-3664] IP 'bd_a1aa_xpcs_0' generated file not found '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/.Xil/Vivado-26302-nsg-System/coregen/bd_a1aa_xpcs_0_2/elaborate/configure_gt.tcl'. Please regenerate to continue.
|
|
open_project: Time (s): cpu = 00:00:05 ; elapsed = 00:00:05 . Memory (MB): peak = 1365.715 ; gain = 188.977 ; free physical = 9396 ; free virtual = 15104
|
|
# puts "\nOpening $design Implementation design\n"
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
WARNING: [Synth 8-689] width (12) of port connection 'control_S_AXI_ARADDR' does not match port width (8) of module 'SimpleSumeSwitch' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:199]
|
|
ERROR: [Synth 8-448] named port connection 'tuple_out_sume_metadata_VALID' does not exist for instance 'SimpleSumeSwitch_inst' of module 'SimpleSumeSwitch' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:218]
|
|
ERROR: [Synth 8-448] named port connection 'tuple_out_sume_metadata_DATA' does not exist for instance 'SimpleSumeSwitch_inst' of module 'SimpleSumeSwitch' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:219]
|
|
ERROR: [Synth 8-6156] failed synthesizing module 'nf_sume_sdnet' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/nf_sume_sdnet_ip/wrapper/nf_sume_sdnet.v:44]
|
|
ERROR: [Synth 8-6156] failed synthesizing module 'nf_sume_sdnet_ip' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.srcs/sources_1/ip/nf_sume_sdnet_ip/synth/nf_sume_sdnet_ip.v:57]
|
|
ERROR: [Synth 8-6156] failed synthesizing module 'nf_datapath' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/hdl/nf_datapath.v:44]
|
|
ERROR: [Synth 8-6156] failed synthesizing module 'top' [/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/hdl/top.v:43]
|
|
\end{verbatim}
|
|
|
|
Missing ``souce'' files:
|
|
\begin{verbatim}
|
|
cc -c -fPIC /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/sw/API/CAM.c -I/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/sw/API
|
|
cc -std=c99 -Wall -Werror -fPIC -c libcam.c -I/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/sw/sume -I/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/sw/API
|
|
cc -L/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/sw/sume -shared -o libcam.so libcam.o CAM.o -lsumereg
|
|
/usr/bin/ld: cannot find -lsumereg
|
|
collect2: error: ld returned 1 exit status
|
|
Makefile:52: recipe for target 'libcam' failed
|
|
make[1]: *** [libcam] Error 1
|
|
make[1]: Leaving directory '/home/nico/master-thesis/netpfga/minip4/sw/CLI'
|
|
ERROR: could not compile libcam souce files
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
Generated files not found:
|
|
\begin{verbatim}
|
|
make: Leaving directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test'
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/Makefile': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_0_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_1_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_2_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_stim.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/nf_interface_3_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/dma_0_log.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/dma_0_expected.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/Makefile': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/reg_stim.log': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/reg_expect.axi': No such file or directory
|
|
cp: cannot stat '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/reg_stim.axi': No such file or directory
|
|
NetFPGA environment:
|
|
Root dir: /home/nico/projects/P4-NetFPGA
|
|
Project name: simple_sume_switch
|
|
Project dir: /tmp/nico/test/simple_sume_switch
|
|
Work dir: /tmp/nico
|
|
512
|
|
=== Work directory is /tmp/nico/test/simple_sume_switch
|
|
=== Setting up test in /tmp/nico/test/simple_sume_switch/sim_switch_default
|
|
=== Running test /tmp/nico/test/simple_sume_switch/sim_switch_default ... using cmd ['/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/test/sim_switch_default/run.py', '--sim', 'xsim']
|
|
+ date
|
|
Die Jul 23 13:34:54 CEST 2019
|
|
+ [ = no ]
|
|
+ cd /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch
|
|
+ make
|
|
make: *** No targets specified and no makefile found. Stop.
|
|
|
|
\end{verbatim}
|
|
|
|
Renaming variables breaks the compile process
|
|
\begin{verbatim}
|
|
@Xilinx_MaxPacketRegion(1024)
|
|
control TopDeparser(
|
|
- packet_out b,
|
|
- in Parsed_packet p,
|
|
+ packet_out packet,
|
|
+ in Parsed_packet hdr,
|
|
in user_metadata_t user_metadata,
|
|
inout digest_data_t digest_data,
|
|
inout sume_metadata_t sume_metadata) {
|
|
|
|
apply {
|
|
- b.emit(p.ethernet);
|
|
+ packet.emit(hdr.ethernet);
|
|
}
|
|
+
|
|
+
|
|
}
|
|
\end{verbatim}
|
|
|
|
LPM size must be != 64
|
|
|
|
\begin{verbatim}
|
|
minip4_solution.p4(38): [--Wwarn=uninitialized_out_param] warning: out parameter meta may be uninitialized when RealParser terminates
|
|
out metadata meta,
|
|
^^^^
|
|
minip4_solution.p4(35)
|
|
parser RealParser(
|
|
^^^^^^^^^^
|
|
error: LPM table size should be 2^n - 1
|
|
actions_nat64_generic.p4(169): error: could not not map table size size
|
|
size = 64;
|
|
^^^^
|
|
error: table match_types are not the same
|
|
actions_arp.p4(35): error: could not map table key(s) KeyElement
|
|
hdr.arp.dst_ipv4_addr: lpm;
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
error: LPM table size should be 2^n - 1
|
|
actions_arp.p4(55): error: could not not map table size size
|
|
size = 64;
|
|
^^^^
|
|
Makefile:34: recipe for target 'all' failed
|
|
make[1]: *** [all] Error 1
|
|
make[1]: Leaving directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/src'
|
|
Makefile:31: recipe for target 'frontend' failed
|
|
make: *** [frontend] Error 2
|
|
nico@nsg-System:~/master-thesis/netpfga/log$
|
|
|
|
\end{verbatim}
|
|
|
|
LIMIT table match types are not the same error
|
|
\begin{verbatim}
|
|
make[1]: Entering directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/src'
|
|
p4c-sdnet -o minip4.sdnet --sdnet_info .sdnet_switch_info.dat minip4_solution.p4
|
|
actions_egress.p4(52): warning: Table v6_networks is not used; removing
|
|
table v6_networks {
|
|
^^^^^^^^^^^
|
|
actions_egress.p4(69): warning: Table v4_networks is not used; removing
|
|
table v4_networks {
|
|
^^^^^^^^^^^
|
|
actions_nat64_generic.p4(174): warning: Table nat46 is not used; removing
|
|
table nat46 {
|
|
^^^^^
|
|
minip4_solution.p4(38): [--Wwarn=uninitialized_out_param] warning: out parameter meta may be uninitialized when RealParser terminates
|
|
out metadata meta,
|
|
^^^^
|
|
minip4_solution.p4(35)
|
|
parser RealParser(
|
|
^^^^^^^^^^
|
|
error: table match_types are not the same
|
|
actions_arp.p4(35): error: could not map table key(s) KeyElement
|
|
hdr.arp.dst_ipv4_addr: lpm;
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
Makefile:34: recipe for target 'all' failed
|
|
make[1]: *** [all] Error 1
|
|
|
|
table v4_arp {
|
|
key = {
|
|
hdr.ethernet.dst_addr: exact;
|
|
hdr.arp.opcode: exact;
|
|
hdr.arp.dst_ipv4_addr: lpm;
|
|
}
|
|
actions = {
|
|
controller_debug_table_id;
|
|
arp_reply;
|
|
NoAction;
|
|
}
|
|
size = ICMP6_TABLE_SIZE;
|
|
default_action = controller_debug_table_id(TABLE_ARP);
|
|
}
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
Implicit error saying that LPM tables don't work:
|
|
|
|
\begin{verbatim}
|
|
s/sume-sdnet-switch/projects/minip4/nf_sume_sdnet_ip/SimpleSumeSwitch/realmain_lookup_table_0_t.HDL/xpm_memory.sv
|
|
[SW] LPM_Init() - start
|
|
[SW] LPM_Init() - done
|
|
[SW] LPM_LoadDataset() - start
|
|
[SW] LPM_LoadDataset() failed with error code = 12
|
|
FATAL_ERROR: Vivado Simulator kernel has encounted an exception from DPI C function: LPM_VerifyDataset(). Please correct.
|
|
Time: 2016466 ps Iteration: 0 Process: /SimpleSumeSwitch_tb/LPM_VerifyDataset
|
|
File: /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/nf_sume_sdnet_ip/SimpleSumeSwitch/Testbench/SimpleSumeSwitch_tb.sv
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
minip4_solution.p4(35)
|
|
parser RealParser(
|
|
^^^^^^^^^^
|
|
actions_nat64_generic.p4(173): error: table size too small for match_type(EM): 63 < 64
|
|
size = 63;
|
|
^^
|
|
actions_nat64_generic.p4(173): error: could not not map table size size
|
|
size = 63;
|
|
^^^^
|
|
|
|
\end{verbatim}
|
|
|
|
Unsupported default parameters
|
|
\begin{verbatim}
|
|
actions_egress.p4(89): error: data-plane arguments in default_actions are currently unsupported: realmain_controller_debug_table_id_0
|
|
default_action = controller_debug_table_id(TABLE_V4_NETWORKS);
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
terminate called after throwing an instance of 'Util::CompilerBug'
|
|
what(): In file: /wrk/hdscratch/staff/mohan/p4c_sdnet/build/p4c/extensions/sdnet/translate/core/lookupEngine.cpp:137
|
|
Compiler Bug: actions_egress.p4(89): unhandled expression realmain_controller_debug_table_id/realmain_controller_debug_table_id_0(5);
|
|
default_action = controller_debug_table_id(TABLE_V4_NETWORKS);
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
\end{verbatim}
|
|
|
|
Compiler Bug / ifstatement
|
|
\begin{verbatim}
|
|
minip4_solution.p4(39)
|
|
parser RealParser(
|
|
^^^^^^^^^^
|
|
terminate called after throwing an instance of 'Util::CompilerBug'
|
|
what(): In file: /wrk/hdscratch/staff/mohan/p4c_sdnet/build/p4c/extensions/sdnet/writers/pxWriter.h:20
|
|
Compiler Bug: unhandled node: <IfStatement>(471564)
|
|
|
|
Makefile:34: recipe for target 'all' failed
|
|
make[1]: *** [all] Error 134
|
|
make[1]: Leaving directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/src'
|
|
Makefile:31: recipe for target 'frontend' failed
|
|
|
|
\end{verbatim}
|
|
|
|
Applying table ``twice'' in different branches is impossible (another
|
|
compiler bug)
|
|
|
|
\begin{verbatim}
|
|
|
|
make -C src/
|
|
make[1]: Entering directory '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/src'
|
|
p4c-sdnet -o minip4.sdnet --sdnet_info .sdnet_switch_info.dat minip4_solution.p4
|
|
minip4_solution.p4(19): [--Wwarn=uninitialized_out_param] warning: out parameter meta may be uninitialized when RealParser terminates
|
|
out metadata meta,
|
|
^^^^
|
|
minip4_solution.p4(16)
|
|
parser RealParser(
|
|
^^^^^^^^^^
|
|
terminate called after throwing an instance of 'Util::CompilerBug'
|
|
what(): In file: /wrk/hdscratch/staff/mohan/p4c_sdnet/build/p4c/extensions/sdnet/translate/core/tupleEngine.cpp:324
|
|
Compiler Bug: overwrite
|
|
|
|
Makefile:34: recipe for target 'all' failed
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
Adding entries requires setting all parameters
|
|
\begin{verbatim}
|
|
>> table_cam_add_entry realmain_v6_networks_0 realmain.set_egress_port 42540766411362381960998550477184434178 => 1
|
|
ERROR: not enough fields provided to complete _hexify()
|
|
|
|
\end{verbatim}
|
|
|
|
Broken code that cannot convret long to int:
|
|
\begin{verbatim}
|
|
>> table_cam_delete_entry realmain_v6_networks_0 42540766411362381960998550477184434179
|
|
ERROR: failed to convert 42540766411362381960998550477184434179 of type <type 'long'> to an integer
|
|
nico@nsg-System:~/master-thesis/netpfga/minip4/sw/CLI$
|
|
|
|
\end{verbatim}
|
|
|
|
% ----------------------------------------------------------------------
|
|
\section{P4 error messages}
|
|
|
|
\begin{verbatim}
|
|
Warning: you requested the nanomsg event logger, but bmv2 was compiled without -DBMELOG, and the event logger cannot be activated
|
|
Calling target program-options parser
|
|
[14:01:44.334] [bmv2] [D] [thread 23356] Set default default entry for table 'MyIngress.icmp6': MyIngress.controller_debug_table_id - 2,
|
|
[14:01:44.341] [bmv2] [D] [thread 23356] Set default default entry for table 'MyIngress.nat64': MyIngress.controller_debug_table_id - 1,
|
|
[14:01:44.344] [bmv2] [D] [thread 23356] Set default default entry for table 'tbl_act': act -
|
|
[14:01:44.345] [bmv2] [D] [thread 23356] Set default default entry for table 'tbl_act_0': act_0 -
|
|
[14:01:44.345] [bmv2] [D] [thread 23356] Set default default entry for table 'tbl_nat64_icmp6_generic': MyIngress.nat64_icmp6_generic -
|
|
[14:01:44.345] [bmv2] [D] [thread 23356] Set default default entry for table 'tbl_act_1': act_1 -
|
|
[14:01:44.345] [bmv2] [D] [thread 23356] Set default default entry for table 'tbl_act_2': act_2 -
|
|
[14:01:44.345] [bmv2] [D] [thread 23356] Set default default entry for table 'MyIngress.v4_networks': MyIngress.controller_debug_table_id - 5,
|
|
[14:01:44.345] [bmv2] [D] [thread 23356] Set default default entry for table 'MyIngress.v6_networks': MyIngress.controller_debug_table_id - 3,
|
|
[14:01:44.346] [bmv2] [D] [thread 23356] Set default default entry for table 'tbl_act_3': act_3 -
|
|
Invalid entry type 'expression' in field list
|
|
bad json:
|
|
{
|
|
"type" : "expression",
|
|
"value" : {
|
|
"type" : "expression",
|
|
"value" : {
|
|
"left" : null,
|
|
"op" : "d2b",
|
|
"right" : {
|
|
"type" : "field",
|
|
"value" : [ "scalars", "metadata.chk_icmp6_na_ns" ]
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
../p4src/static-mapping.p4(121): error: MyIngress.nat64, Multiple LPM keys in table
|
|
table nat64 {
|
|
^^^^^
|
|
Compilation Error
|
|
|
|
table nat64 {
|
|
key = {
|
|
hdr.ipv6.src_addr: lpm;
|
|
hdr.ipv6.dst_addr: lpm;
|
|
}
|
|
actions = {
|
|
controller_debug;
|
|
nat64_static;
|
|
NoAction;
|
|
}
|
|
size = NAT64_TABLE_SIZE;
|
|
default_action = controller_debug;
|
|
}
|
|
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
../p4src/static-mapping.p4(60): error: SwitchStatement: switch statements not allowed in actions
|
|
switch(hdr.icmp6.type) {
|
|
^^^^^^
|
|
\end{verbatim}
|
|
|
|
No if in actions:
|
|
|
|
\begin{verbatim}
|
|
../p4src/static-mapping.p4(57): error: MethodCallStatement: Conditional execution in actions is not supported on this target
|
|
hdr.icmp.setValid();
|
|
^^^^^^^^^^^^^^^^^^^
|
|
../p4src/static-mapping.p4(70): error: MethodCallStatement: Conditional execution in actions is not supported on this target
|
|
hdr.icmp6.setInvalid();
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
../p4src/static-mapping.p4(73): error: MethodCallStatement: Conditional execution in actions is not supported on this target
|
|
hdr.icmp6_na_ns.setInvalid();
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
../p4src/static-mapping.p4(74): error: MethodCallStatement: Conditional execution in actions is not supported on this target
|
|
hdr.icmp6_option_link_layer_addr.setInvalid();
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
Compilation Error
|
|
p4@ubuntu:~/master-thesis/p4app$
|
|
|
|
if(hdr.ipv6.next_header == PROTO_ICMP6) {
|
|
nat64_icmp6();
|
|
}
|
|
\end{verbatim}
|
|
|
|
\begin{verbatim}
|
|
p4c --target bmv2 --arch v1model --std p4-16 "../p4src/checksum_diff.p4" -o "/home/p4/master-thesis/p4src"
|
|
In file: /home/p4/p4-tools/p4c/backends/bmv2/common/expression.cpp:168
|
|
Compiler Bug: ../p4src/actions_delta_checksum.p4(60): ones_complement_sum(hdr.udp.checksum, tmp);: unhandled case
|
|
tmp = ones_complement_sum(hdr.udp.checksum, meta.v6sum);
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Compilation Error```
|
|
Using the following code:
|
|
```/* copied from
|
|
https://p4.org/p4-spec/docs/PSA-v1.1.0.html#appendix-internetchecksum-implementation
|
|
*/
|
|
|
|
bit<16> ones_complement_sum(in bit<16> x, in bit<16> y) {
|
|
bit<17> ret = (bit<17>) x + (bit<17>) y;
|
|
if (ret[16:16] == 1) {
|
|
ret = ret + 1;
|
|
}
|
|
return ret[15:0];
|
|
}```
|
|
And p4c version:
|
|
```p4@ubuntu:~/master-thesis/p4app$ p4c --version
|
|
p4c 0.5 (SHA: 5ae30ee)```
|
|
\end{verbatim}
|
|
|
|
% ----------------------------------------------------------------------
|
|
\section{Traces}
|
|
|
|
Proof of stuff working, reference for each stage / feature
|
|
|
|
Stuff that needs to be cleaned up
|
|
|
|
\section{Introduction}
|
|
|
|
\subsection{\label{introduction:taskdescription}The Task}
|
|
- Milestone 1: Stateless NAT64/NAT46 translations in P4
|
|
- Milestone 2: Stateful (dynamic) NAT64/NAT46 translations
|
|
- Milestone 3: Hardware adaption
|
|
|
|
This thesis is
|
|
into 3 milestone
|
|
P4 environment
|
|
a lot of potential
|
|
Programming language in the network
|
|
Not only faster, but also more convienient.
|
|
|
|
**** High speed NAT64 with P4
|
|
Currently there are two main open source NAT64 solution available:
|
|
tayga and jool. The former is a single threaded, cpu bound user
|
|
space solution, the latter a custom Linux kernel module.
|
|
|
|
This thesis challenges this status quo by developing a P4 based
|
|
solution supporting all features of jool/tayga and comparing the
|
|
performance, security and adaptivity of the solutions.
|
|
|
|
|
|
Describe your task.
|
|
|
|
|
|
\begin{verbatim}
|
|
|
|
***** Motivation zeigen
|
|
***** IPv6, NetPFGA mehr Möglichketien
|
|
***** P4 erwähnen
|
|
***** Task gut zu zeigen, alles erreicht
|
|
use cases / sample applications
|
|
|
|
|
|
\end{verbatim}
|
|
|
|
%---------------------------------------------------------------------------------------------------------
|
|
\printnomenclature
|
|
\abbrev{ARP}{Address resolution protocol}
|
|
\abbrev{ASIC}{Application-specific integrated circuit}
|
|
\abbrev{FGPA}{Field-programmable gate array}
|
|
\abbrev{LPM}{Longes prefix matching}
|
|
\abbrev{MTU}{Maximum transfer unit}
|
|
\abbrev{NDP}{Neighbor Discovery Protocol}
|
|
\abbrev{NAT}{Network Address Translation}
|
|
\abbrev{NAT64}{Network Address Translation from / to IPv6 to / from IPv4}
|
|
\abbrev{RIR}{Regional Internet Registry}
|