__netbox_gunicorn: extract gunicorn setup from __netbox

Because someone *want* to use something other than just gunicorn, it was
extracted to a own type. Because gunicorn is a bit deep in the netbox
installation process, it's a bit harder to isolate it.

`__netbox_uwsgi` will come, too.

type/__netbox/gencode-remote

@@ -35,6 +35,7 @@ rm -r '$install_dir'
 cp -r '$src/netbox' '$install_dir'
 mkdir '$install_dir/cdist'
 
+cp '$src/requirements.txt' /opt/netbox/  # backup dependency info
 cp \$tmpdir/configuration.py '$install_dir/netbox/configuration.py'
 cp \$tmpdir/ldap_config.py '$install_dir/netbox/ldap_config.py'
 
@@ -43,7 +44,9 @@ cp \$tmpdir/ldap_config.py '$install_dir/netbox/ldap_config.py'
 virtualenv -p python3 /opt/netbox/venv
 
 # Install python dependencies.
-/opt/netbox/venv/bin/pip3 install -r "\$tmpdir/$src/requirements.txt"
+#  avoid gunicorn, because it will be done in an other type
+grep -v "^gunicorn==" "\$tmpdir/$src/requirements.txt" \
+    | xargs /opt/netbox/venv/bin/pip3 install
 EOF
 
     if [ -f "$__object/parameter/ldap-server" ]; then
@@ -94,8 +97,7 @@ fi
 # check for changes
 if [ "$changes" = "yes" ]; then
     cat << EOF
-# Restart services.
+# Restart service.
-service netbox restart
 service netbox-rq restart
 EOF
 fi

type/__netbox/manifest

@@ -204,13 +204,7 @@ $SECRET_KEY
 SECRET
 
 
-# Upload systemd units and gunicorn configuration.
+# Upload systemd unit for worker service
-for unit in netbox netbox-rq; do
+__systemd_unit netbox-rq.service \
-    __systemd_unit $unit.service \
+    --source "$__type/files/netbox-rq.service" \
-        --source "$__type/files/$unit.service" \
     --enablement-state enabled
-done
-
-# Python worker configuration.
-require="__user/netbox" __file /opt/netbox/gunicorn.py \
-    --mode 644 --source "$__type/files/gunicorn.py"

type/__netbox_gunicorn/explorer/installed

@@ -0,0 +1,4 @@
+#!/bin/sh -e
+
+# print version if available
+/opt/netbox/venv/bin/pip3 show gunicorn | awk '/Version:/{print $2}'

type/__netbox_gunicorn/explorer/should_installed

@@ -0,0 +1,3 @@
+#!/bin/sh -e
+
+awk -v FS="==" '$1 ~ /gunicorn/{print $2}' /opt/netbox/requirements.txt

type/__netbox_gunicorn/files/gunicorn.py.sh

@@ -1,9 +1,23 @@
+#!/bin/sh -e
+
+# Generates gunicorn config
+# see https://docs.gunicorn.org/en/stable/settings.html
+
+# fix missing $__explorer
+# see https://code.ungleich.ch/ungleich-public/cdist/-/issues/834
+__explorer="$__global/explorer"
+
+# size workes by cpu
+cores="$(cat "$__explorer/cpu_cores")"
+
+
+cat << EOF
 # The IP address (typically localhost) and port that the Netbox WSGI process should listen on
-bind = '127.0.0.1:8001'
+bind = [$HOST ]
 
 # Number of gunicorn workers to spawn. This should typically be 2n+1, where
 # n is the number of CPU cores present.
-workers = 3
+workers = $(( 2*cores + 1 ))
 
 # Number of threads per worker process
 threads = 3
@@ -14,3 +28,4 @@ timeout = 120
 # The maximum number of requests a worker can handle before being respawned
 max_requests = 5000
 max_requests_jitter = 500
+EOF

type/__netbox_gunicorn/files/netbox.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=NetBox WSGI Service
+Description=NetBox Gunicorn WSGI Service
 Documentation=https://netbox.readthedocs.io/en/stable/
 After=network-online.target
 Wants=network-online.target
@@ -19,4 +19,5 @@ RestartSec=30
 PrivateTmp=true
 
 [Install]
+Alias=netbox.service
 WantedBy=multi-user.target

type/__netbox_gunicorn/gencode-remote

@@ -0,0 +1,36 @@
+#!/bin/sh -e
+
+curr_installed="$(cat "$__object/explorer/installed")"
+should_installed="$(cat "$__object/explorer/should_installed")"
+
+# gunicorn version change
+if [ "$curr_installed" != "$should_installed" ]; then
+    # (re)installing gunicorn
+    echo "/opt/netbox/venv/bin/pip3 install 'gunicorn==$should_installed'"
+
+    do_restart=yes
+    printf "updated %s to %s\n" "$curr_installed" "$should_installed" \
+        >> "$__messages_out"
+fi
+
+# configuration changes
+if grep -q "^__file/opt/netbox/gunicorn.py:" "$__messages_in"; then
+    do_restart=yes
+    printf "configuration\n" >> "$__messages_out"
+fi
+
+# application
+if grep -q "^__netbox:" "$__messages_in"; then
+    do_restart=yes
+    # no message cause it should be obvious
+fi
+
+
+# restart gunicorn
+if [ "$do_restart"]; then
+    cat << EOF
+# Restart service
+service gunicorn-netbox restart
+EOF
+    echo restarted >> "$__messages_out"
+fi

type/__netbox_gunicorn/man.rst

@@ -0,0 +1,75 @@
+cdist-type__netbox_uwsgi(7)
+===========================
+
+NAME
+----
+cdist-type__netbox_gunicorn - run netbox with gunicorn
+
+
+DESCRIPTION
+-----------
+This space intentionally left blank.
+
+
+REQUIRED PARAMETERS
+-------------------
+None.
+
+
+OPTIONAL PARAMETERS
+-------------------
+bind-to
+    The hosts the gunicorn socket should be bind to. Formats are `IP`,
+    `IP:PORT`, `unix:PATH` and `fd://FD`. Parameter can be set a multiple
+    times. Defaults to ``127.0.0.1:8001``.
+
+
+BOOLEAN PARAMETERS
+------------------
+None.
+
+
+MESSAGES
+--------
+updated $old to $new
+    The version of the gunicorn software was updated from `$old` to `$new`.
+
+configuration
+    Configuration for gunicorn changed.
+
+In both cases, and at messages from the `__netbox` type, it restarts the
+service to using the up-to-date version.
+
+
+EXAMPLES
+--------
+
+.. code-block:: sh
+
+    # simple
+    __netbox $args
+    require="__netbox" __netbox_gunicorn
+
+    # with arguments
+    __netbox $args
+    require="__netbox" __netbox_gunicorn \
+        --bind-to 0.0.0.0:8001 \
+        --bind-to 1.2.3.4:5678
+
+
+SEE ALSO
+--------
+:strong:`__netbox`\ (7)
+
+
+AUTHORS
+-------
+Matthias Stecher <matthiasstecher@gmx.de>
+
+
+COPYING
+-------
+Copyright \(C) 2020 Matthias Stecher. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

type/__netbox_gunicorn/manifest

@@ -0,0 +1,20 @@
+#!/bin/sh -e
+
+HOST=""
+while read -r host; do
+    HOST="$HOST '$host',"
+done < "$__object/parameter/bind-to"
+export HOST
+
+# process template
+mkdir "$__object/files"
+"$__type/files/gunicorn.py.sh" > "$__object/files/gunicorn.py"
+
+# gunicorn config file
+__file /opt/netbox/gunicorn.py \
+    --mode 644 --source "$__object/files/gunicorn.py"
+
+# install service file
+__systemd_unit gunicorn-netbox.service \
+    --source "$__type/files/netbox.service" \
+    --enablement-state enabled --restart

type/__netbox_gunicorn/parameter/default/bind-to

@@ -0,0 +1 @@
+127.0.0.1:8001

type/__netbox_gunicorn/parameter/optional_multiple

@@ -0,0 +1 @@
+bind-to