[matrix] update password config when it login

type/__bird_bgp/manifest

@@ -89,6 +89,7 @@ ipv4_import=
 if [ -f "${__object:?}"/parameter/ipv4-import ];
 then
 	ipv4_import="$(cat "${__object:?}"/parameter/ipv4-import)"
+	echo "FOO" >&2
 fi
 export ipv4_import
 

type/__bird_radv/man.rst

@@ -15,29 +15,12 @@ autoconfigure IPv6 hosts, this type is a rudimentary implementation to generate
 configuration for Bird to do so.
 
 
-REQUIRED PARAMETERS
--------------------
+REQUIRED MULTIPLE PARAMETERS
+----------------------------
 interface
   The interfaces to activate the protocol on. RAs will be sent using the
   prefixes configured on these interfaces.
 
-OPTIONAL PARAMETERS
--------------------
-mtu
-  An optional MTU setting to include in the router advertisements.
-
-default-preference
-  This option specifies the Default Router Preference value to advertise to
-  hosts. Default: medium.
-
-route-preference
-  This option specifies the default value of advertised route preference for
-  specific routes. Default: medium.
-
-default-lifetime
-  This option specifies the time (in seconds) how long (since the receipt of RA)
-  hosts may use the router as a default router. 0 means do not use as a default
-  router. Default: 3.
 
 OPTIONAL MULTIPLE PARAMETERS
 ----------------------------
@@ -58,7 +41,6 @@ EXAMPLES
 
     __bird_radv datacenter \
         --interface eth1 \
-        --mtu 9000 \
         --route ::/0 \
         --ns 2001:DB8:cafe::4 \
         --ns 2001:DB8:cafe::14 \

type/__bird_radv/manifest

@@ -55,52 +55,23 @@ then
 	DNSSL=$(sed -e 's/^/\tdnssl "/' -e 's/$/";/' "${__object:?}/parameter/dnssl")
 fi
 
-MTU=
-if [ -f "${__object:?}/parameter/mtu" ];
-then
-	MTU="link mtu $(cat "${__object:?}/parameter/mtu");"
-fi
-
-DEFAULT_PREFERENCE=
-if [ -f "${__object:?}/parameter/default-preference" ];
-then
-	DEFAULT_PREFERENCE="default preference $(cat "${__object:?}/parameter/default-preference");"
-fi
-
-ROUTE_PREFERENCE=
-if [ -f "${__object:?}/parameter/route-preference" ];
-then
-	ROUTE_PREFERENCE="route preference $(cat "${__object:?}/parameter/route-preference");"
-fi
-
-DEFAULT_LIFETIME=
-if [ -f "${__object:?}/parameter/default-lifetime" ];
-then
-	DEFAULT_LIFETIME="default lifetime $(cat "${__object:?}/parameter/default-lifetime");"
-fi
-
 __file "${confdir:?}/radv-${__object_id:?}.conf" \
 	--mode 0640 --owner root --group bird \
 	--source - << EOF
-ipv6 table radv_routes_${__object_id};
+ipv6 table radv_routes;
 
 protocol static {
 	description "Routes advertised via RAs";
-	ipv6 { table radv_routes_${__object_id}; };
+	ipv6 { table radv_routes; };
 
 $(sed -e 's/^/\troute /' -e 's/$/ unreachable;/' "${__object:?}/parameter/route")
 }
 
 protocol radv ${__object_id:?} {
 	propagate routes ${have_routes:?};
-	ipv6 { table radv_routes_${__object_id}; export all; };
+	ipv6 { table radv_routes; export all; };
 
-	interface "$(cat "${__object:?}/parameter/interface")" {
-	$MTU
-	$DEFAULT_LIFETIME
-	$DEFAULT_PREFERENCE
-	$ROUTE_PREFERENCE
-	};
+$(sed -e 's/^/\tinterface "/' -e 's/$/";/' "${__object:?}/parameter/interface")
 
 $RDNS
 

type/__bird_radv/parameter/optional

@@ -1,4 +0,0 @@
-mtu
-default-preference
-route-preference
-default-lifetime

type/__jitsi_meet/explorer/configured-memory

@@ -1,15 +0,0 @@
-#!/bin/sh -eu
-
-JICOFO="/usr/share/jicofo/jicofo.sh"
-VIDEOBRIDGE="/usr/share/jitsi-videobridge/lib/videobridge.rc"
-
-if [ -f "${JICOFO:?}" ]; then
-	jicofo_memory="$(grep JICOFO_MAX_MEMORY= "${JICOFO:?}" | cut -d= -f 2 | cut -d ";" -f 1)"
-fi
-if [ -f "${VIDEOBRIDGE:?}" ]; then
-	vb_memory="$(grep VIDEOBRIDGE_MAX_MEMORY= "${VIDEOBRIDGE:?}" | cut -d= -f 2)"
-fi
-cat <<EOF
-jicofo	${jicofo_memory:-n/a}
-videobridge	${vb_memory:-n/a}
-EOF

type/__jitsi_meet/explorer/jicofo-authpassword

@@ -1,26 +0,0 @@
-#!/bin/sh -eu
-
-JICOFO_AUTHPASSWORD=""
-# We need this to properly configure jicofo
-
-# Default to reading debconf
-DEBCONF_PASS_FILE="/var/cache/debconf/passwords.dat"
-if [ -f "${DEBCONF_PASS_FILE}" ]; then
-	JICOFO_AUTHPASSWORD="$(grep -A1 'Template: jicofo/jicofo-authpassword' "${DEBCONF_PASS_FILE}" | tail -n 1 | cut -d ' ' -f 2-)"
-fi
-
-# Try jicofo.conf if necessary
-JICOFO_CONF_FILE="/etc/jitsi/jicofo/jicofo.conf"
-if [ -z "${JICOFO_AUTHPASSWORD}" ] && [ -f "${JICOFO_CONF_FILE}" ]; then
-	JICOFO_AUTHPASSWORD="$(grep -E '^[[:space:]]*password:' "${JICOFO_CONF_FILE}" | sed -E 's!^[^:]*:[[:space:]]*"(.*)"$!\1!')"
-fi
-
-# And fallback to config file if necessary
-JICOFO_CONFIG_FILE="/etc/jitsi/jicofo/config"
-if [ -z "${JICOFO_AUTHPASSWORD}" ] && [ -f "${JICOFO_CONFIG_FILE}" ]; then
-	JICOFO_AUTHPASSWORD="$(grep -E '^JICOFO_AUTH_PASSWORD=' "${JICOFO_CONFIG_FILE}" | cut -d '=' -f 2-)"
-fi
-
-# If we didn't find it, this is likely a new installation and we'll generate
-# the password on the manifest
-echo "${JICOFO_AUTHPASSWORD:-}"

type/__jitsi_meet/explorer/jitsi-status

@@ -1,6 +0,0 @@
-#!/bin/sh -eu
-
-if [ ! -f "${__object}/parameter/disable-prometheus-exporter" ]; then
-	# TODO: detect curl / depend on it?
-	curl -s localhost:9888/metrics
-fi

type/__jitsi_meet/explorer/prometheus-jitsi-meet-explorer-version

@@ -0,0 +1,7 @@
+#!/bin/sh -e
+
+EXPORTER_VERSION_FILE="/usr/local/bin/.prometheus-jitsi-meet-exporter.cdist.version"
+
+if [ -f "${EXPORTER_VERSION_FILE}" ]; then
+	cat "${EXPORTER_VERSION_FILE}"
+fi

type/__jitsi_meet/files/debconf_settings.sh

@@ -5,6 +5,9 @@
 if false; then
 	# We are currently not using these, just here as documentation
 	DEBCONF_SETTINGS="$(cat <<EOF
+# Jicofo user password:
+jicofo	jicofo/jicofo-authpassword	password	STH
+jitsi-meet-prosody	jicofo/jicofo-authpassword	password	STH
 # The secret used to connect to xmpp server as component
 jitsi-meet-prosody	jitsi-videobridge/jvbsecret	password	STH
 jitsi-videobridge	jitsi-videobridge/jvbsecret	password	STH
@@ -37,9 +40,6 @@ jitsi-videobridge	jitsi-videobridge/jvb-hostname	string	${JITSI_HOST}
 jitsi-videobridge2	jitsi-videobridge/jvb-hostname	string	${JITSI_HOST}
 # The hostname of the current installation:
 jitsi-meet-prosody	jitsi-meet-prosody/jvb-hostname string	${JITSI_HOST}
-# Jicofo user password:
-jicofo	jicofo/jicofo-authpassword	password	${JICOFO_AUTHPASSWORD}
-jitsi-meet-prosody	jicofo/jicofo-authpassword	password	${JICOFO_AUTHPASSWORD}
 # SSL certificate for the Jitsi Meet instance
 # Choices: Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate), I want to use my own certificate
 jitsi-meet-web-config	jitsi-meet/cert-choice	select	Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate)

type/__jitsi_meet/files/jicofo.conf.sh

@@ -1,38 +0,0 @@
-#!/bin/sh -eu
-
-# Start
-cat <<EOF
-# Managed remotely, changes will be lost
-
-# Jicofo HOCON configuration. See /usr/share/jicofo/jicofo.jar/reference.conf for
-#available options, syntax, and default values.
-jicofo {
-  xmpp: {
-    client: {
-      client-proxy: focus.${JITSI_HOST:?}
-      xmpp-domain: "${JITSI_HOST:?}"
-      domain: "auth.${JITSI_HOST:?}"
-      username: "focus"
-      password: "${JICOFO_AUTHPASSWORD:?}"
-    }
-    trusted-domains: [ "recorder.${JITSI_HOST:?}" ]
-  }
-  bridge: {
-    brewery-jid: "JvbBrewery@internal.auth.${JITSI_HOST:?}"
-  }
-EOF
-
-# Secured domains if needed
-if [ "${SECURED_DOMAINS_STATE:?}" = "present" ]; then
-cat <<EOF
-
-  authentication: {
-    enabled: true
-    type: XMPP
-    login-url: ${JITSI_HOST:?}
-  }
-EOF
-fi
-
-# End
-echo '}'

type/__jitsi_meet/files/jitsi-version

@@ -1 +0,0 @@
-../../__jitsi_meet_domain/files/jitsi-version

type/__jitsi_meet/files/prosody.cfg.lua.sh

@@ -1 +0,0 @@
-../../__jitsi_meet_domain/files/prosody.cfg.lua.sh

type/__jitsi_meet/gencode-remote

@@ -1,43 +1,11 @@
 #!/bin/sh -e
 
-memory="$(cat "${__global}/explorer/memory")"
-G="000000"  # Will totally eff up the zero-count otherwise
-# MAX_MEMORY will affect jicofo and videobridge
-#  As a rule of thumb, the machine's RAM should be more than 2.5 * MAX_MEMORY
-if [ "${memory}" -lt "3${G}" ]; then
-	# If you use this, let us know how it works!
-	MAX_MEMORY="768m"
-elif [ "${memory}" -lt "5${G}" ]; then
-	MAX_MEMORY="1024m"
-elif [ "${memory}" -lt "8${G}" ]; then
-	MAX_MEMORY="2048m"
-else
-	# Jitsi recommends running on 8G RAM and these are the defaults
-	MAX_MEMORY="3072m"
-fi
-
-if cut -f 2 "${__object}/explorer/configured-memory" | grep -qvE "^${MAX_MEMORY}$"; then
-	# At least one service has different memory settings
-	RESTART_SERVICES="YES"
-	cat <<-EOF
-	sed -i.tmp -E \
-		-e 's!^(#[[:space:]]*)?(VIDEOBRIDGE_MAX_MEMORY)=.*\$!\2=${MAX_MEMORY}!' \
-		/usr/share/jitsi-videobridge/lib/videobridge.rc
-	sed -i.tmp -E \
-		-e 's!(JICOFO_MAX_MEMORY)[^";]+;!\1=${MAX_MEMORY};!' \
-		/usr/share/jicofo/jicofo.sh
-	EOF
-fi
-
 if grep -qE "^__file/etc/nginx" "${__messages_in}"; then
 	echo "service nginx reload"
 fi
 
-if grep -qE "^(__line/jitsi_jicofo_secured_domains|(__file|__link)/etc/prosody/conf.d/|__file/etc/jitsi/(jicofo/jicofo.conf|videobridge/jvb.conf))" "${__messages_in}"; then
-	RESTART_SERVICES="YES"
-fi
-
-if [ -n "${RESTART_SERVICES}" ]; then
+JITSI_HOST="${__object_id}"
+if grep -qE "^(__line/jitsi_jicofo_secured_domains|__file/etc/prosody/conf.d/${JITSI_HOST}.zauth.cfg.lua)" "${__messages_in}"; then
   echo "systemctl restart prosody"
   echo "systemctl restart jicofo"
   echo "systemctl restart jitsi-videobridge2"

type/__jitsi_meet/man.rst

@@ -21,24 +21,13 @@ You will also need the `__jitsi_meet_domain` type in order to finish setting up
 the web frontend (including TLS certificates) and its settings.
 
 You may want to use the `files/ufw` example manifest for a `__ufw`-based
-firewall compatible with this type that allows all ports needed by Jitsi-Meet.
-Note however that this will not deal with rules for SSH or for TCP port 9888,
-which exposes the prometheus exporter if not disabled.
-Remember to apply your own rules here, particularly regarding SSH.
+firewall compatible with this type.
+This file does not include rules for TCP port 9888, which exposes the
+prometheus exporter if not disabled.
+You should apply your own rules here.
 
 This type only works on De{bi,vu}an systems.
 
-It is very important for this type to stay up to date with the software, as
-otherwise new deployments or maintenance of existing instances might be
-negatively affected.
-If you can, please contribute updates to `__jitsi_meet` and
-`__jitsi_meet_domain` promptly and regularly.
-Alternatively, you can help finance that work; get in touch with the type
-authors for that (see below).
-
-This type takes care of adapting the maximum memory used by jicofo and
-videobridge in function of the hosts installed memory.
-
 NOTE: This type currently does not deal with setting up coturn.
       For that, you might want to check `__coturn` in
       https://code.ungleich.ch/ungleich-public/cdist-contrib
@@ -47,14 +36,6 @@ NOTE: This type currently does not deal with setting up coturn.
 
 OPTIONAL PARAMETERS
 -------------------
-abort-conference-count
-    Only has an effect if the prometheus exporter is enabled and if it is not
-    empty (default).
-    If at least this many conferences are active on the server, the type will
-    bail out before making any changes.
-    This is useful if you want to avoid service disruptions due to e.g. an SLA.
-
-
 turn-secret
     The shared secret for the TURN server.
 
@@ -62,6 +43,11 @@ turn-server
     The hostname of the TURN server.
     This will assume that it is listening with TLS on port 443.
 
+jitsi-version
+    The jitsi-meet version of the Debian package to be installed.
+    While this can be specified, only the default value is known to work
+    properly with this type.
+
 
 BOOLEAN PARAMETERS
 ------------------
@@ -84,11 +70,9 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Setup the firewall for Jitsi-Meet
+    # Setup the firewall 
     . "${__global}/type/__jitsi_meet/files/ufw"
     export require="__ufw"
-    # Setup firewall SSH rules as necessary
-    __ufw_rule ssh --rule 'allow 22/tcp from 10.0.0.0/24'
     # Setup Jitsi on this host
     __jitsi_meet \
       --turn-server "turn.exo.cat" \
@@ -108,4 +92,4 @@ Evilham <contact@evilham.com>
 
 COPYING
 -------
-Copyright \(C) 2022 Evilham.
+Copyright \(C) 2021 Evilham.

type/__jitsi_meet/manifest

@@ -1,6 +1,7 @@
 #!/bin/sh -e
 
 os="$(cat "${__global}/explorer/os")"
+init="$(cat "${__global}/explorer/init")"
 case "${os}" in
 	devuan|debian)
 	;;
@@ -10,37 +11,10 @@ case "${os}" in
 	;;
 esac
 
-current_conferences="$(cat "${__object}/explorer/jitsi-status" | grep -E "^jitsi_conferences[[:space:]]" | cut -d ' ' -f 2)"
-
-JICOFO_AUTHPASSWORD="$(cat "${__object}/explorer/jicofo-authpassword")"
-if [ -z "${JICOFO_AUTHPASSWORD}" ]; then
-	# This is probably a first time installation, we'll generate the
-	# password which will be set in debconf by this type
-	# https://github.com/jitsi/jicofo/blob/aafb61b5363a1c4abdbf08e1444a6276b807993e/debian/postinst#L43
-	JICOFO_AUTHPASSWORD="$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | head -c 16)"
-fi
-
-ABORT_CONFERENCE_COUNT="$(cat "${__object}/parameter/abort-conference-count")"
-
-if [ -n "${current_conferences}" ] && [ -n "${ABORT_CONFERENCE_COUNT}" ] && \
-	[ "${ABORT_CONFERENCE_COUNT}" -le "${current_conferences}" ]; then
-	cat <<-EOF
-Early bail out was requested when at least ${ABORT_CONFERENCE_COUNT} conferences are taking place.
-There are currently ${current_conferences} active conferences.
-
-Try again at a later time or remove or increase --abort-conference-count
-	EOF
-	exit 1
-fi
 
 JITSI_HOST="${__target_host}"
-if [ -f "${__object}/parameter/jitsi-version" ]; then
-	# This has been deprecated and will be removed 'soon'
-	JITSI_VERSION="$(cat "${__object}/parameter/jitsi-version")"
-else
-	# Note this won't be a parameter anymore, we won't let users stay behind
-	JITSI_VERSION="$(cat "${__type}/files/jitsi-version")"
-fi
+# Currently unused, see below
+# JITSI_VERSION="$(cat "${__object}/parameter/jitsi-version")"
 TURN_SERVER="$(cat "${__object}/parameter/turn-server")"
 TURN_SECRET="$(cat "${__object}/parameter/turn-secret")"
 
@@ -48,6 +22,8 @@ if [ -z "${TURN_SERVER}" ]; then
 	TURN_SERVER="${JITSI_HOST}"
 fi
 
+PROMETHEUS_JITSI_EXPORTER_IS_VERSION="$(cat "${__object}/explorer/prometheus-jitsi-meet-explorer-version")"
+
 # The rest is loosely based on Jitsi's documentation
 # https://jitsi.github.io/handbook/docs/devops-guide/devops-guide-quickstart
 
@@ -75,16 +51,17 @@ export require="${require} __apt_source/jitsi_meet __apt_update_index"
 # Pre-feed debconf settings, so Jitsi's installation has a good config
 # shellcheck source=type/__jitsi_meet/files/debconf_settings.sh
 . "${__type}/files/debconf_settings.sh"  # This defines DEBCONF_SETTINGS
-__debconf_set_selections jitsi_meet --line "${DEBCONF_SETTINGS}"
+__debconf_set_selections jitsi_meet --file - <<EOF
+${DEBCONF_SETTINGS}
+EOF
 export require="${require} __debconf_set_selections/jitsi_meet"
 
 # Install and upgrade packages as needed
-#   NOTE: we are doing version pinning again, but it breaks sometimes when
+__package_apt jitsi-meet
+# We are not doing version pinning anymore because it breaks when
 # the version is not the latest.
-#         This happens because dependencies might not be properly resolved.
-#         To avoid this, this type must be maintained up to date.
-#         If we don't use this, keeping Jitsi's up to date is very difficult.
-__package_apt jitsi-meet --version "${JITSI_VERSION}"
+# This happens because dependencies cannot be properly resolved.
+# --version "${JITSI_VERSION}"
 
 # Proceed only after installation/upgrade has finished
 export require="__package_apt/jitsi-meet"
@@ -149,9 +126,8 @@ require="__directory${NGINX_ETC}/sites-available" __file "${NGINX_ETC}/sites-ava
 server_names_hash_bucket_size 64;
 
 types {
-# nginx's default mime.types doesn't include a mapping for wasm or wav.
+# nginx's default mime.types doesn't include a mapping for wasm
     application/wasm     wasm;
-    audio/wav            wav;
 }
 
 server {
@@ -175,145 +151,95 @@ server {
 }
 EOF
 
-# Starting from 2.0.7210, jitsi defines following nginx upstreams
-__directory "${NGINX_ETC}/conf.d" --state present
-require="__directory${NGINX_ETC}/conf.d" __file "${NGINX_ETC}/conf.d/prosody.conf" \
-  --mode 644 \
-  --source - << EOF
-upstream prosody {
-    zone upstreams 64K;
-    server 127.0.0.1:5280;
-    keepalive 2;
-}
-EOF
-require="__directory${NGINX_ETC}/conf.d" __file "${NGINX_ETC}/conf.d/jvb1.conf" \
-  --mode 644 \
-  --source - << EOF
-upstream jvb1 {
-    zone upstreams 64K;
-    server 127.0.0.1:9090;
-    keepalive 2;
-}
-EOF
-
 if [ -f "${__object}/parameter/secured-domains" ]; then
   SECURED_DOMAINS_STATE='present'
+  SECURED_DOMAINS_STATE_JICOFO='replace'
 else
   SECURED_DOMAINS_STATE='absent'
+  SECURED_DOMAINS_STATE_JICOFO='absent'
 fi
 
-# This is the main host config
-PROSODY_MAIN_CONFIG="YES"
-# Prosody settings for common components (jvb, focus, ...)
-# shellcheck source=type/__jitsi_meet/files/prosody.cfg.lua.sh
-. "${__type}/files/prosody.cfg.lua.sh"  # This defines PROSODY_CONFIG
-__file "/etc/prosody/conf.d/00_jitsi_base.cfg.lua" \
-	--group prosody \
-	--mode 0440 \
+__file "/etc/prosody/conf.d/${JITSI_HOST}.zauth.cfg.lua" \
+  --owner prosody --group prosody --mode 0440 \
+  --state ${SECURED_DOMAINS_STATE} \
   --source - <<EOF
-${PROSODY_CONFIG}
+VirtualHost "${JITSI_HOST}"
+    authentication = "internal_plain"
+
+VirtualHost "guest.${JITSI_HOST}"
+    authentication = "anonymous"
+    c2s_require_encryption = false
 EOF
 
-# Clean up zauth.cfg.lua file, which we don't use now
-__file "/etc/prosody/conf.d/${JITSI_HOST}.zauth.cfg.lua" \
-  --state absent
-
-export SECURED_DOMAINS_STATE
-export JITSI_HOST
-export JICOFO_AUTHPASSWORD
-"${__type}/files/jicofo.conf.sh" | \
-	__file /etc/jitsi/jicofo/jicofo.conf --mode 0444 --source '-'
-
-# Enable the private colibri REST API end point for better stats
-__file "/etc/jitsi/videobridge/jvb.conf" --mode 0444 --source '-' <<EOFJVB
-videobridge {
-    http-servers {
-        public {
-            port = 9090
+__block jitsi_jicofo_secured_domains \
+  --prefix "// begin cdist: jicofo_secured_domains" \
+  --suffix "// end   cdist: jicofo_secured_domains" \
+  --file /etc/jitsi/jicofo/jicofo.conf \
+  --state "${SECURED_DOMAINS_STATE_JICOFO}" \
+  --text '-' <<EOF
+  authentication: {
+    enabled: true
+    type: XMPP
+    login-url: ${JITSI_HOST}
   }
-        private {
-            port = 8080
-        }
-    }
-    websockets {
-        enabled = true
-        domain = "${JITSI_HOST}:443"
-        tls = true
-    }
-    apis {
-        rest {
-            enabled = true
-        }
-    }
-}
-EOFJVB
-
-# Enable simple per-domain body customisation
-__file "/usr/share/jitsi-meet/body.html" \
-	--mode 0644 \
-	--source '-' <<EOF
-<!--#include virtual="body-\${host}.html" -->
 EOF
 
 # These two should be changed on new release
-EXPORTER_VERSION="1.2.1"
-EXPORTER_CHECKSUM="sha256:46d4b8475b72fd7632a5203f1cc3c7067bed4629902b7780a1da85e4e06c2129"
-EXPORTER_URL="https://github.com/systemli/prometheus-jitsi-meet-exporter/releases/download/${EXPORTER_VERSION}/prometheus-jitsi-meet-exporter_${EXPORTER_VERSION}_linux_amd64.tar.gz"
-if [ -f "${__object}/parameter/disable-prometheus-exporter" ]; then
-	EXPORTER_STATE="absent"
-else
-	EXPORTER_STATE="present"
-fi
-__evilham_single_binary_service prometheus-jitsi-meet-exporter \
-	--state "${EXPORTER_STATE}" \
-	--do-not-manage-user \
-	--user "nobody" \
-	--group "nogroup" \
-	--version "${EXPORTER_VERSION}" \
-	--checksum "${EXPORTER_CHECKSUM}" \
-	--url "${EXPORTER_URL}" \
-	--unpack \
-	--service-args "-videobridge-url 'http://localhost:8080/colibri/stats' -web.listen-address ':9888'"
-
-#
-# Setup interpreter assets if requested
-# See: https://gitlab.com/mfmt/jsi/
-#
-jsi_updated_on="2022-04-21"
-__link "/usr/share/jitsi-meet/interpreters.html" \
-	--type symbolic \
-	--source "/opt/jsi/static/index.html.sample"
-__directory /opt/jsi --mode 0755
-export require="__directory/opt/jsi"
-__download /opt/jsi/jsi.tar.gz \
-	--url 'https://gitlab.com/mfmt/jsi/-/archive/1d2cceaf615ee61c0bba80e5bddc61c5d1018303/jsi-1d2cceaf615ee61c0bba80e5bddc61c5d1018303.tar.gz' \
-	--sum "sha256:b020141093daa9937507b098f358d0be994834c3e23866a457fc5140415a0c53"
-export require="__download/opt/jsi/jsi.tar.gz"
-__unpack /opt/jsi/jsi.tar.gz \
-	--preserve-archive \
-	--tar-strip 1 \
-	--destination /opt/jsi/static \
-	--onchange "$(cat <<EOF
-# Patch style.css to be served on /i/
-sed -i.tmp -E \
-	-e 's!url[(]/img/welcome-background.png[)]!url(/i/img/welcome-background.png)!' \
-	/opt/jsi/static/style.css
-# Patch jsi.js to be served on /i/
-#   and so it always uses the domain it's served from
-#   and so it uses /i/ROOM for the form
-sed -i.tmp -E \
-	-e 's!substr[(][0-9]+[)]!substr(3)!' \
-	-e 's!config[.]jitsimeet_url!url.host!' \
-	-e 's!(window[.]location[.]href)[[:space:]]*=[[:space:]]*"/"!\1 = "/i/"!' \
-	/opt/jsi/static/jsi.js
-# Patch the sample index.html, so it loads external_api.js from same host
-#   and to easen up on the branding
-#   and to enable browser cache
-sed -i.tmp -E \
-	-e "s!src=[^>]*(/external_api.js).!src='\1'!" \
-	-e "s!<h1>[^<]*</h1>!<h1>Jitsi Meetings with interpreter</h1>!" \
-	-e "s!https://meet.mayfirst.org!/!" \
-	-e "s!(style.css|jsi.js)([^?])!\1?v=${jsi_updated_on:?}\2!" \
-	/opt/jsi/static/index.html.sample
+PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION="1.1.5"
+PROMETHEUS_JITSI_EXPORTER_CHECKSUM="sha256:3ddf43a48d9a2f62be1bc6db9e7ba75d61994f9423e5c5b28be019f41f06f745"
+PROMETHEUS_JITSI_EXPORTER_URL="https://github.com/systemli/prometheus-jitsi-meet-exporter/releases/download/${PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION}/prometheus-jitsi-meet-exporter-linux-amd64"
+PROMETHEUS_JITSI_EXPORTER_VERSION_FILE="/usr/local/bin/.prometheus-jitsi-meet-exporter.cdist.version"
+if [ ! -f "${__object}/parameter/disable-prometheus-exporter" ]; then
+	case "${init}" in
+		init|sysvinit)
+			__runit
+			require="__runit" __runit_service \
+				prometheus-jitsi-meet-exporter --log --source - <<EOF
+			#!/bin/sh -e
+			cd /tmp
+			exec chpst -u "nobody:nogroup" env HOME="/tmp" \\
+			     prometheus-jitsi-meet-exporter \\
+				-videobridge-url 'http://localhost:8888/stats' \\
+				-web.listen-address ':9888' 2>&1
 EOF
-)"
+
+			export require="__runit_service/prometheus-jitsi-meet-exporter"
+			JITSI_MEET_EXPORTER_SERVICE="sv %s prometheus-jitsi-meet-exporter"
+		;;
+		systemd)
+			__systemd_unit prometheus-jitsi-meet-exporter.service \
+				--source "-" \
+				--enablement-state "enabled" <<EOF
+[Unit]
+Description=Metrics Exporter for Jitsi Meet
+After=network.target
+
+[Service]
+Type=simple
+DynamicUser=yes
+ExecStart=/usr/local/bin/prometheus-jitsi-meet-exporter -videobridge-url 'http://localhost:8888/stats' -web.listen-address ':9888'
+Restart=always
+
+[Install]
+WantedBy=multi-user.target
+EOF
+			export require="__systemd_unit/prometheus-jitsi-meet-exporter.service"
+			JITSI_MEET_EXPORTER_SERVICE="service prometheus-jitsi-meet-exporter %s"
+		;;
+	esac
+	if [ "${PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION}" != \
+		"${PROMETHEUS_JITSI_EXPORTER_IS_VERSION}" ]; then
+		# shellcheck disable=SC2059
+		__download \
+			/tmp/prometheus-jitsi-meet-exporter \
+			--url "${PROMETHEUS_JITSI_EXPORTER_URL}" \
+			--download remote \
+			--sum "${PROMETHEUS_JITSI_EXPORTER_CHECKSUM}" \
+			--onchange "$(printf "${JITSI_MEET_EXPORTER_SERVICE}" "stop") || true; chmod 555 /tmp/prometheus-jitsi-meet-exporter && mv /tmp/prometheus-jitsi-meet-exporter /usr/local/bin/prometheus-jitsi-meet-exporter && $(printf "${JITSI_MEET_EXPORTER_SERVICE}" "restart")"
+		printf "%s" "${PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION}" | \
+			require="${require} __download/tmp/prometheus-jitsi-meet-exporter" __file \
+			"${PROMETHEUS_JITSI_EXPORTER_VERSION_FILE}" \
+			--source "-"
+	fi
+fi
+# TODO: disable the exporter if it is deployed and then admin changes their mind

type/__jitsi_meet/parameter/default/jitsi-version

@@ -0,0 +1 @@
+2.0.5765-1

type/__jitsi_meet/parameter/deprecated/jitsi-version

@@ -1,4 +0,0 @@
-Supporting different versions lead to strange issues in the life-time of a
-Jitsi instance. Chiefly: difficulties upgrading.
-
-If you are specifying this for a valid reason, please get in touch.

type/__jitsi_meet/parameter/optional

@@ -1,4 +1,3 @@
-abort-conference-count
 jitsi-version
 turn-secret
 turn-server

type/__jitsi_meet_domain/files/_update_jitsi_configurations.sh

@@ -7,7 +7,7 @@
 
 # We could automate this, but are using it as an indicator for the
 # latest branch with which we conciliated changes.
-BRANCH="jitsi-meet_8319"
+BRANCH="jitsi-meet_6726"
 REPO="https://github.com/jitsi/jitsi-meet"
 
 get_url() {
@@ -28,8 +28,3 @@ download_file() {
 download_file config.js
 download_file interface_config.js
 download_file doc/debian/jitsi-meet/jitsi-meet.example nginx.sh.orig
-download_file doc/debian/jitsi-meet-prosody/prosody.cfg.lua-jvb.example prosody.cfg.lua.sh.orig
-
-# Change the version file, maintainers should check that it matches
-# the deb version
-printf "2.0.%s-1" "${BRANCH#*_}" > jitsi-version

type/__jitsi_meet_domain/files/interface_config.js.sh

@@ -20,7 +20,7 @@ JITSI_INTERFACE_CONFIG_JS="$(cat <<EOF
  */
 
 var interfaceConfig = {
-    APP_NAME: '${BRANDING_APP_NAME}',
+    APP_NAME: 'Jitsi Meet',
     AUDIO_LEVEL_PRIMARY_COLOR: 'rgba(255,255,255,0.4)',
     AUDIO_LEVEL_SECONDARY_COLOR: 'rgba(255,255,255,0.2)',
 
@@ -37,7 +37,8 @@ var interfaceConfig = {
 
     CLOSE_PAGE_GUEST_HINT: false, // A html text to be shown to guests on the close page, false disables it
 
-    DEFAULT_BACKGROUND: '#040404',
+    DEFAULT_BACKGROUND: '#474747',
+    DEFAULT_LOGO_URL: '${BRANDING_WATERMARK_PATH}',
     DEFAULT_WELCOME_PAGE_LOGO_URL: '${BRANDING_WATERMARK_PATH}',
 
     DISABLE_DOMINANT_SPEAKER_INDICATOR: false,
@@ -87,6 +88,11 @@ var interfaceConfig = {
 
     GENERATE_ROOMNAMES_ON_WELCOME_PAGE: true,
 
+    /**
+     * Hide the logo on the deep linking pages.
+     */
+    HIDE_DEEP_LINKING_LOGO: false,
+
     /**
      * Hide the invite prompt in the header when alone in the meeting.
      */
@@ -95,6 +101,7 @@ var interfaceConfig = {
     JITSI_WATERMARK_LINK: 'https://jitsi.org',
 
     LANG_DETECTION: true, // Allow i18n to detect the system language
+    LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live', // Documentation reference for the live streaming feature.
     LOCAL_THUMBNAIL_RATIO: 16 / 9, // 16:9
 
     /**
@@ -114,6 +121,23 @@ var interfaceConfig = {
      */
     MOBILE_APP_PROMO: true,
 
+    /**
+     * Specify custom URL for downloading android mobile app.
+     */
+    MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
+
+    /**
+     * Specify custom URL for downloading f droid app.
+     */
+    MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
+
+    /**
+     * Specify URL for downloading ios mobile app.
+     */
+    MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
+
+    NATIVE_APP_NAME: 'Jitsi Meet',
+
     // Names of browsers which should show a warning stating the current browser
     // has a suboptimal experience. Browsers which are not listed as optimal or
     // unsupported are considered suboptimal. Valid values are:
@@ -131,7 +155,7 @@ var interfaceConfig = {
     RECENT_LIST_ENABLED: true,
     REMOTE_THUMBNAIL_RATIO: 1, // 1:1
 
-    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds', 'more' ],
+    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds' ],
 
     /**
      * Specify which sharing features should be displayed. If the value is not set
@@ -148,6 +172,7 @@ var interfaceConfig = {
      */
     SHOW_CHROME_EXTENSION_BANNER: false,
 
+    SHOW_DEEP_LINKING_IMAGE: false,
     SHOW_JITSI_WATERMARK: true,
     SHOW_POWERED_BY: false,
     SHOW_PROMOTIONAL_CLOSE_PAGE: false,
@@ -188,31 +213,6 @@ var interfaceConfig = {
      */
     // TILE_VIEW_MAX_COLUMNS: 5,
 
-    // List of undocumented settings
-    /**
-     INDICATOR_FONT_SIZES
-     PHONE_NUMBER_REGEX
-    */
-
-    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
-
-    /**
-     * Specify URL for downloading ios mobile app.
-     */
-    // MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
-
-    /**
-     * Specify custom URL for downloading android mobile app.
-     */
-    // MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
-
-    /**
-     * Specify mobile app scheme for opening the app from the mobile browser.
-     */
-    // APP_SCHEME: 'org.jitsi.meet',
-
-    // NATIVE_APP_NAME: 'Jitsi Meet',
-
     /**
      * Specify Firebase dynamic link properties for the mobile apps.
      */
@@ -225,19 +225,22 @@ var interfaceConfig = {
     // },
 
     /**
-     * Hide the logo on the deep linking pages.
+     * Specify mobile app scheme for opening the app from the mobile browser.
      */
-    // HIDE_DEEP_LINKING_LOGO: false,
+    // APP_SCHEME: 'org.jitsi.meet',
 
     /**
      * Specify the Android app package name.
      */
     // ANDROID_APP_PACKAGE: 'org.jitsi.meet',
 
+    // List of undocumented settings
     /**
-     * Specify custom URL for downloading f droid app.
+     INDICATOR_FONT_SIZES
+     PHONE_NUMBER_REGEX
     */
-    // MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
+
+    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
 
     // Connection indicators (
     // CONNECTION_INDICATOR_AUTO_HIDE_ENABLED,
@@ -250,19 +253,12 @@ var interfaceConfig = {
     // Please use defaultLocalDisplayName from config.js
     // DEFAULT_LOCAL_DISPLAY_NAME: 'me',
 
-    // Please use defaultLogoUrl from config.js
-    DEFAULT_LOGO_URL: '${BRANDING_WATERMARK_PATH}',
-
     // Please use defaultRemoteDisplayName from config.js
     // DEFAULT_REMOTE_DISPLAY_NAME: 'Fellow Jitster',
 
     // Moved to config.js as \`toolbarConfig.initialTimeout\`.
     // INITIAL_TOOLBAR_TIMEOUT: 20000,
 
-    // Moved to config.js as \`toolbarConfig.alwaysVisible\`.
-    // Documentation reference for the live streaming feature.
-    // LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live',
-
     // Moved to config.js as \`toolbarConfig.alwaysVisible\`.
     // TOOLBAR_ALWAYS_VISIBLE: false,
 

type/__jitsi_meet_domain/files/interface_config.js.sh.orig

@@ -26,7 +26,8 @@ var interfaceConfig = {
 
     CLOSE_PAGE_GUEST_HINT: false, // A html text to be shown to guests on the close page, false disables it
 
-    DEFAULT_BACKGROUND: '#040404',
+    DEFAULT_BACKGROUND: '#474747',
+    DEFAULT_LOGO_URL: 'images/watermark.svg',
     DEFAULT_WELCOME_PAGE_LOGO_URL: 'images/watermark.svg',
 
     DISABLE_DOMINANT_SPEAKER_INDICATOR: false,
@@ -76,6 +77,11 @@ var interfaceConfig = {
 
     GENERATE_ROOMNAMES_ON_WELCOME_PAGE: true,
 
+    /**
+     * Hide the logo on the deep linking pages.
+     */
+    HIDE_DEEP_LINKING_LOGO: false,
+
     /**
      * Hide the invite prompt in the header when alone in the meeting.
      */
@@ -84,6 +90,7 @@ var interfaceConfig = {
     JITSI_WATERMARK_LINK: 'https://jitsi.org',
 
     LANG_DETECTION: true, // Allow i18n to detect the system language
+    LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live', // Documentation reference for the live streaming feature.
     LOCAL_THUMBNAIL_RATIO: 16 / 9, // 16:9
 
     /**
@@ -103,6 +110,23 @@ var interfaceConfig = {
      */
     MOBILE_APP_PROMO: true,
 
+    /**
+     * Specify custom URL for downloading android mobile app.
+     */
+    MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
+
+    /**
+     * Specify custom URL for downloading f droid app.
+     */
+    MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
+
+    /**
+     * Specify URL for downloading ios mobile app.
+     */
+    MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
+
+    NATIVE_APP_NAME: 'Jitsi Meet',
+
     // Names of browsers which should show a warning stating the current browser
     // has a suboptimal experience. Browsers which are not listed as optimal or
     // unsupported are considered suboptimal. Valid values are:
@@ -120,7 +144,7 @@ var interfaceConfig = {
     RECENT_LIST_ENABLED: true,
     REMOTE_THUMBNAIL_RATIO: 1, // 1:1
 
-    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds', 'more' ],
+    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds' ],
 
     /**
      * Specify which sharing features should be displayed. If the value is not set
@@ -137,6 +161,7 @@ var interfaceConfig = {
      */
     SHOW_CHROME_EXTENSION_BANNER: false,
 
+    SHOW_DEEP_LINKING_IMAGE: false,
     SHOW_JITSI_WATERMARK: true,
     SHOW_POWERED_BY: false,
     SHOW_PROMOTIONAL_CLOSE_PAGE: false,
@@ -177,31 +202,6 @@ var interfaceConfig = {
      */
     // TILE_VIEW_MAX_COLUMNS: 5,
 
-    // List of undocumented settings
-    /**
-     INDICATOR_FONT_SIZES
-     PHONE_NUMBER_REGEX
-    */
-
-    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
-
-    /**
-     * Specify URL for downloading ios mobile app.
-     */
-    // MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
-
-    /**
-     * Specify custom URL for downloading android mobile app.
-     */
-    // MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
-
-    /**
-     * Specify mobile app scheme for opening the app from the mobile browser.
-     */
-    // APP_SCHEME: 'org.jitsi.meet',
-
-    // NATIVE_APP_NAME: 'Jitsi Meet',
-
     /**
      * Specify Firebase dynamic link properties for the mobile apps.
      */
@@ -214,19 +214,22 @@ var interfaceConfig = {
     // },
 
     /**
-     * Hide the logo on the deep linking pages.
+     * Specify mobile app scheme for opening the app from the mobile browser.
      */
-    // HIDE_DEEP_LINKING_LOGO: false,
+    // APP_SCHEME: 'org.jitsi.meet',
 
     /**
      * Specify the Android app package name.
      */
     // ANDROID_APP_PACKAGE: 'org.jitsi.meet',
 
+    // List of undocumented settings
     /**
-     * Specify custom URL for downloading f droid app.
+     INDICATOR_FONT_SIZES
+     PHONE_NUMBER_REGEX
     */
-    // MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
+
+    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
 
     // Connection indicators (
     // CONNECTION_INDICATOR_AUTO_HIDE_ENABLED,
@@ -239,19 +242,12 @@ var interfaceConfig = {
     // Please use defaultLocalDisplayName from config.js
     // DEFAULT_LOCAL_DISPLAY_NAME: 'me',
 
-    // Please use defaultLogoUrl from config.js
-    // DEFAULT_LOGO_URL: 'images/watermark.svg',
-
     // Please use defaultRemoteDisplayName from config.js
     // DEFAULT_REMOTE_DISPLAY_NAME: 'Fellow Jitster',
 
     // Moved to config.js as `toolbarConfig.initialTimeout`.
     // INITIAL_TOOLBAR_TIMEOUT: 20000,
 
-    // Please use `liveStreaming.helpLink` from config.js
-    // Documentation reference for the live streaming feature.
-    // LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live',
-
     // Moved to config.js as `toolbarConfig.alwaysVisible`.
     // TOOLBAR_ALWAYS_VISIBLE: false,
 

type/__jitsi_meet_domain/files/jitsi-version

@@ -1 +0,0 @@
-2.0.8319-1

type/__jitsi_meet_domain/files/nginx.sh

@@ -7,31 +7,8 @@ JITSI_NGINX_CONFIG="$(cat <<EOF
 #server_names_hash_bucket_size 64;
 #
 #types {
-## nginx's default mime.types doesn't include a mapping for wasm or wav.
+## nginx's default mime.types doesn't include a mapping for wasm
 #    application/wasm     wasm;
-#    audio/wav            wav;
-#}
-# These upstreams are managed by __jitsi_meet
-#upstream prosody {
-#    zone upstreams 64K;
-#    server 127.0.0.1:5280;
-#    keepalive 2;
-#}
-#upstream jvb1 {
-#    zone upstreams 64K;
-#    server 127.0.0.1:9090;
-#    keepalive 2;
-#}
-#map \$arg_vnode \$prosody_node {
-#    default prosody;
-#    v1 v1;
-#    v2 v2;
-#    v3 v3;
-#    v4 v4;
-#    v5 v5;
-#    v6 v6;
-#    v7 v7;
-#    v8 v8;
 #}
 server {
     listen 80;
@@ -103,13 +80,6 @@ server {
         alias /usr/share/jitsi-meet/libs/external_api.min.js;
     }
 
-    location = /_api/room-info {
-        proxy_pass http://prosody/room-info?prefix=\$prefix&\$args;
-        proxy_http_version 1.1;
-        proxy_set_header X-Forwarded-For \$remote_addr;
-        proxy_set_header Host \$http_host;
-    }
-
     # ensure all static content can always be found first
     location ~ ^/(libs|css|static|images|fonts|lang|sounds|connection_optimization|.well-known)/(.*)\$
     {
@@ -122,48 +92,32 @@ server {
         }
     }
 
-    # Paths for jsi / interpreters
-    location ~ ^/i/(img/[^./]*.png|jsi.js|style.css)$
-    {
-        add_header 'Access-Control-Allow-Origin' '*';
-        alias /opt/jsi/static/\$1;
-
-        # cache all versioned files
-        if (\$arg_v) {
-            expires 1y;
-        }
-    }
-    location ~ ^/i/
-    {
-        try_files /${DOMAIN}-interpreters.html /interpreters.html \$uri;
-    }
-
     # BOSH
     location = /http-bind {
-        proxy_pass http://prosody/http-bind?prefix=\$prefix&\$args;
-        proxy_http_version 1.1;
+	# We are using 127.0.0.1, because we are not specifying a resolver
+	# otherwise nginx will fail to resolve 'localhost'
+        proxy_pass http://127.0.0.1:5280/http-bind?prefix=\$prefix&\$args;
         proxy_set_header X-Forwarded-For \$remote_addr;
 	# Prevision for 'multi-domain' jitsi instances
 	# https://community.jitsi.org/t/same-jitsi-meet-instance-with-multiple-domain-names/17391
-        proxy_set_header Host ${DOMAIN};
-        proxy_set_header Connection "";
+        proxy_set_header Host ${JITSI_HOST};
     }
 
     # xmpp websockets
     location = /xmpp-websocket {
-        proxy_pass http://prosody/xmpp-websocket?prefix=\$prefix&\$args;
+        proxy_pass http://127.0.0.1:5280/xmpp-websocket?prefix=\$prefix&\$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade \$http_upgrade;
         proxy_set_header Connection "upgrade";
 	# Prevision for 'multi-domain' jitsi instances
 	# https://community.jitsi.org/t/same-jitsi-meet-instance-with-multiple-domain-names/17391
-        proxy_set_header Host ${DOMAIN};
+        proxy_set_header Host ${JITSI_HOST};
         tcp_nodelay on;
     }
 
     # colibri (JVB) websockets for jvb1
     location ~ ^/colibri-ws/default-id/(.*) {
-        proxy_pass http://jvb1/colibri-ws/default-id/\$1\$is_args\$args;
+        proxy_pass http://127.0.0.1:9090/colibri-ws/default-id/\$1\$is_args\$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade \$http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -213,14 +167,6 @@ server {
         rewrite ^/(.*)\$ /xmpp-websocket;
     }
 
-    location ~ ^/([^/?&:'"]+)/_api/room-info {
-        set \$subdomain "\$1.";
-        set \$subdir "\$1/";
-        set \$prefix "\$1";
-
-        rewrite ^/(.*)\$ /_api/room-info;
-    }
-
     # Anything that didn't match above, and isn't a real file, assume it's a room name and redirect to /
     location ~ ^/([^/?&:'"]+)/(.*)\$ {
         set \$subdomain "\$1.";

type/__jitsi_meet_domain/files/nginx.sh.orig

@@ -1,30 +1,8 @@
 server_names_hash_bucket_size 64;
 
 types {
-# nginx's default mime.types doesn't include a mapping for wasm or wav.
+# nginx's default mime.types doesn't include a mapping for wasm
     application/wasm     wasm;
-    audio/wav            wav;
-}
-upstream prosody {
-    zone upstreams 64K;
-    server 127.0.0.1:5280;
-    keepalive 2;
-}
-upstream jvb1 {
-    zone upstreams 64K;
-    server 127.0.0.1:9090;
-    keepalive 2;
-}
-map $arg_vnode $prosody_node {
-    default prosody;
-    v1 v1;
-    v2 v2;
-    v3 v3;
-    v4 v4;
-    v5 v5;
-    v6 v6;
-    v7 v7;
-    v8 v8;
 }
 server {
     listen 80;
@@ -85,13 +63,6 @@ server {
         alias /usr/share/jitsi-meet/libs/external_api.min.js;
     }
 
-    location = /_api/room-info {
-        proxy_pass http://prosody/room-info?prefix=$prefix&$args;
-        proxy_http_version 1.1;
-        proxy_set_header X-Forwarded-For $remote_addr;
-        proxy_set_header Host $http_host;
-    }
-
     # ensure all static content can always be found first
     location ~ ^/(libs|css|static|images|fonts|lang|sounds|connection_optimization|.well-known)/(.*)$
     {
@@ -106,16 +77,14 @@ server {
 
     # BOSH
     location = /http-bind {
-        proxy_pass http://$prosody_node/http-bind?prefix=$prefix&$args;
-        proxy_http_version 1.1;
+        proxy_pass http://127.0.0.1:5280/http-bind?prefix=$prefix&$args;
         proxy_set_header X-Forwarded-For $remote_addr;
         proxy_set_header Host $http_host;
-        proxy_set_header Connection "";
     }
 
     # xmpp websockets
     location = /xmpp-websocket {
-        proxy_pass http://$prosody_node/xmpp-websocket?prefix=$prefix&$args;
+        proxy_pass http://127.0.0.1:5280/xmpp-websocket?prefix=$prefix&$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade $http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -125,7 +94,7 @@ server {
 
     # colibri (JVB) websockets for jvb1
     location ~ ^/colibri-ws/default-id/(.*) {
-        proxy_pass http://jvb1/colibri-ws/default-id/$1$is_args$args;
+        proxy_pass http://127.0.0.1:9090/colibri-ws/default-id/$1$is_args$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade $http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -175,14 +144,6 @@ server {
         rewrite ^/(.*)$ /xmpp-websocket;
     }
 
-    location ~ ^/([^/?&:'"]+)/_api/room-info {
-        set $subdomain "$1.";
-        set $subdir "$1/";
-        set $prefix "$1";
-
-        rewrite ^/(.*)$ /_api/room-info;
-    }
-
     # Anything that didn't match above, and isn't a real file, assume it's a room name and redirect to /
     location ~ ^/([^/?&:'"]+)/(.*)$ {
         set $subdomain "$1.";

type/__jitsi_meet_domain/files/prosody.cfg.lua.sh

@@ -1,220 +0,0 @@
-#!/bin/sh -eu
-
-# Source:
-# https://github.com/jitsi/jitsi-meet/blob/master/doc/debian/jitsi-meet-prosody/prosody.cfg.lua-jvb.example
-FOCUS_USER="focus"
-JITSI_DOMAIN="${JITSI_DOMAIN:-${JITSI_HOST:?}}"
-# PROSODY_MAIN_CONFIG: defined in __jitsi_meet, empty in __jitsi_meet_domain
-PROSODY_SECUREDOMAIN_START="--[["
-PROSODY_SECUREDOMAIN_END="--]]"
-if [ -n "${PROSODY_MAIN_CONFIG}" ]; then
-	PROSODY_MAIN_START=""
-	PROSODY_MAIN_END=""
-	PROSODY_DOMAIN_START="--[["
-	PROSODY_DOMAIN_END="--]]"
-else
-	PROSODY_MAIN_START="--[["
-	PROSODY_MAIN_END="--]]"
-	PROSODY_DOMAIN_START=""
-	PROSODY_DOMAIN_END=""
-	if [ -n "${SECURED_DOMAINS}" ]; then
-		PROSODY_SECUREDOMAIN_START=""
-		PROSODY_SECUREDOMAIN_END=""
-	fi
-fi
-# Websockets haven't been fully tested in this type and don't work reliably
-PROSODY_WEBSOCKET="-- "
-
-# shellcheck disable=SC2034  # This is intended to be included
-PROSODY_CONFIG="$(cat <<EOFPROSODY
--- Managed remotely, changes will be lost
-${PROSODY_MAIN_START}
--- This will be managed by __jitsi_meet
-plugin_paths = { "/usr/share/jitsi-meet/prosody-plugins/" }
-
--- domain mapper options, must at least have domain base set to use the mapper
-muc_mapper_domain_base = "${JITSI_HOST:?}";
-
-external_service_secret = "${TURN_SECRET:-TurnSecret}";
-external_services = {
-     { type = "stun", host = "${JITSI_HOST:?}", port = 3478 },
-     { type = "turn", host = "${JITSI_HOST:?}", port = 3478, transport = "udp", secret = true, ttl = 86400, algorithm = "turn" },
-     { type = "turns", host = "${JITSI_HOST:?}", port = 5349, transport = "tcp", secret = true, ttl = 86400, algorithm = "turn" }
-};
-
-cross_domain_bosh = false;
-consider_bosh_secure = true;
--- Use websockets
--- https://community.jitsi.org/t/how-to-how-to-enable-websockets-xmpp-websocket-and-smacks-for-prosody/87920
-${PROSODY_WEBSOCKET}consider_websocket_secure = true;
-
--- https_ports = { }; -- Remove this line to prevent listening on port 5284
-
--- by default prosody 0.12 sends cors headers, if you want to disable it uncomment the following (the config is available on 0.12.1)
---http_cors_override = {
---    bosh = {
---        enabled = false;
---    };
---    websocket = {
---        enabled = false;
---    };
---}
-
--- https://ssl-config.mozilla.org/#server=haproxy&version=2.1&config=intermediate&openssl=1.1.0g&guideline=5.4
-ssl = {
-    protocol = "tlsv1_2+";
-    ciphers = "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
-}
-
-unlimited_jids = {
-    "${FOCUS_USER:?}@auth.${JITSI_HOST:?}",
-    "jvb@auth.${JITSI_HOST:?}"
-}
-${PROSODY_MAIN_END}
-
-${PROSODY_DOMAIN_START}
--- This will be managed by __jitsi_meet_domain
-VirtualHost "${JITSI_DOMAIN:?}"
-    authentication = "jitsi-anonymous" -- do not delete me
-    -- Properties below are modified by jitsi-meet-tokens package config
-    -- and authentication above is switched to "token"
-    --app_id="example_app_id"
-    --app_secret="example_app_secret"
-    -- Assign this host a certificate for TLS, otherwise it would use the one
-    -- set in the global section (if any).
-    -- Note that old-style SSL on port 5223 only supports one certificate, and will always
-    -- use the global one.
-    ssl = {
-        key = "/etc/prosody/certs/${JITSI_DOMAIN:?}.key";
-        certificate = "/etc/prosody/certs/${JITSI_DOMAIN:?}.crt";
-    }
-    av_moderation_component = "avmoderation.${JITSI_DOMAIN:?}"
-    speakerstats_component = "speakerstats.${JITSI_DOMAIN:?}"
-    conference_duration_component = "conferenceduration.${JITSI_DOMAIN:?}"
-    end_conference_component = "endconference.${JITSI_DOMAIN:?}"
-    -- we need bosh
-    modules_enabled = {
-        "bosh";
-        "pubsub";
-        "ping"; -- Enable mod_ping
-        "speakerstats";
-        "external_services";
-        "conference_duration";
-        "end_conference";
-        "muc_lobby_rooms";
-        "muc_breakout_rooms";
-        "av_moderation";
-        "room_metadata";
-${PROSODY_WEBSOCKET}        "websocket";
-${PROSODY_WEBSOCKET}        "smacks";
-    }
-    smacks_max_unacked_stanzas = 5;
-    smacks_hibernation_time = 60;
-    smacks_max_hibernated_sessions = 1;
-    smacks_max_old_sessions = 1;
-    c2s_require_encryption = false
-    lobby_muc = "lobby.${JITSI_DOMAIN:?}"
-    breakout_rooms_muc = "breakout.${JITSI_DOMAIN:?}"
-    room_metadata_component = "metadata.${JITSI_DOMAIN:?}"
-    main_muc = "conference.${JITSI_DOMAIN:?}"
-    -- muc_lobby_whitelist = { "recorder.${JITSI_DOMAIN:?}" } -- Here we can whitelist jibri to enter lobby enabled rooms
-
-Component "conference.${JITSI_DOMAIN:?}" "muc"
-    restrict_room_creation = true
-    storage = "memory"
-    modules_enabled = {
-        "muc_meeting_id";
-        "muc_domain_mapper";
-        "polls";
-        --"token_verification";
-        "muc_rate_limit";
-    }
-    admins = { "${FOCUS_USER:?}@auth.${JITSI_HOST:?}" }
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-
-Component "breakout.${JITSI_DOMAIN:?}" "muc"
-    restrict_room_creation = true
-    storage = "memory"
-    modules_enabled = {
-        "muc_meeting_id";
-        "muc_domain_mapper";
-        "muc_rate_limit";
-        "polls";
-    }
-    admins = { "${FOCUS_USER:?}@auth.${JITSI_HOST:?}" }
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-
--- internal muc component
-Component "internal.auth.${JITSI_DOMAIN:?}" "muc"
-    storage = "memory"
-    modules_enabled = {
-        "ping";
-    }
-    admins = { "${FOCUS_USER:?}@auth.${JITSI_HOST:?}", "jvb@auth.${JITSI_HOST:?}" }
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-    -- https://prosody.im/doc/modules/mod_muc
-    muc_room_cache_size = 1000
-${PROSODY_DOMAIN_END}
-${PROSODY_MAIN_START}
--- This will be managed by __jitsi_meet
-
-VirtualHost "auth.${JITSI_DOMAIN:?}"
-    ssl = {
-       key = "/etc/prosody/certs/auth.${JITSI_DOMAIN:?}.key";
-       certificate = "/etc/prosody/certs/auth.${JITSI_DOMAIN:?}.crt";
-    }
-
-    modules_enabled = {
-        "limits_exception";
-    }
-    authentication = "internal_hashed"
-${PROSODY_MAIN_END}
-${PROSODY_DOMAIN_START}
--- This will be managed by __jitsi_meet_domain
-
--- Proxy to jicofo's user JID, so that it doesn't have to register as a component.
-Component "focus.${JITSI_DOMAIN:?}" "client_proxy"
-    -- Single focus user for the whole instance
-    target_address = "${FOCUS_USER:?}@auth.${JITSI_HOST:?}"
-
-Component "speakerstats.${JITSI_DOMAIN:?}" "speakerstats_component"
-    muc_component = "conference.${JITSI_DOMAIN:?}"
-
-Component "conferenceduration.${JITSI_DOMAIN:?}" "conference_duration_component"
-    muc_component = "conference.${JITSI_DOMAIN:?}"
-
-Component "endconference.${JITSI_DOMAIN:?}" "end_conference"
-    muc_component = "conference.${JITSI_DOMAIN:?}"
-
-Component "avmoderation.${JITSI_DOMAIN:?}" "av_moderation_component"
-    muc_component = "conference.${JITSI_DOMAIN:?}"
-
-Component "lobby.${JITSI_DOMAIN:?}" "muc"
-    storage = "memory"
-    restrict_room_creation = true
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-    modules_enabled = {
-        "muc_rate_limit";
-        "polls";
-    }
-
-Component "metadata.${JITSI_DOMAIN:?}" "room_metadata_component"
-    muc_component = "conference.${JITSI_DOMAIN:?}"
-    breakout_rooms_component = "breakout.${JITSI_DOMAIN:?}"
-${PROSODY_DOMAIN_END}
-
-${PROSODY_SECUREDOMAIN_START}
--- Only used on secured domains
-VirtualHost "${JITSI_DOMAIN}"
-    authentication = "internal_plain"
-
-VirtualHost "guest.${JITSI_DOMAIN}"
-    authentication = "anonymous"
-    c2s_require_encryption = false
-${PROSODY_SECUREDOMAIN_END}
-EOFPROSODY
-)"

type/__jitsi_meet_domain/files/prosody.cfg.lua.sh.orig

@@ -1,148 +0,0 @@
-plugin_paths = { "/usr/share/jitsi-meet/prosody-plugins/" }
-
--- domain mapper options, must at least have domain base set to use the mapper
-muc_mapper_domain_base = "jitmeet.example.com";
-
-external_service_secret = "__turnSecret__";
-external_services = {
-     { type = "stun", host = "jitmeet.example.com", port = 3478 },
-     { type = "turn", host = "jitmeet.example.com", port = 3478, transport = "udp", secret = true, ttl = 86400, algorithm = "turn" },
-     { type = "turns", host = "jitmeet.example.com", port = 5349, transport = "tcp", secret = true, ttl = 86400, algorithm = "turn" }
-};
-
-cross_domain_bosh = false;
-consider_bosh_secure = true;
--- https_ports = { }; -- Remove this line to prevent listening on port 5284
-
--- by default prosody 0.12 sends cors headers, if you want to disable it uncomment the following (the config is available on 0.12.1)
---http_cors_override = {
---    bosh = {
---        enabled = false;
---    };
---    websocket = {
---        enabled = false;
---    };
---}
-
--- https://ssl-config.mozilla.org/#server=haproxy&version=2.1&config=intermediate&openssl=1.1.0g&guideline=5.4
-ssl = {
-    protocol = "tlsv1_2+";
-    ciphers = "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
-}
-
-unlimited_jids = {
-    "focusUser@auth.jitmeet.example.com",
-    "jvb@auth.jitmeet.example.com"
-}
-
-VirtualHost "jitmeet.example.com"
-    authentication = "jitsi-anonymous" -- do not delete me
-    -- Properties below are modified by jitsi-meet-tokens package config
-    -- and authentication above is switched to "token"
-    --app_id="example_app_id"
-    --app_secret="example_app_secret"
-    -- Assign this host a certificate for TLS, otherwise it would use the one
-    -- set in the global section (if any).
-    -- Note that old-style SSL on port 5223 only supports one certificate, and will always
-    -- use the global one.
-    ssl = {
-        key = "/etc/prosody/certs/jitmeet.example.com.key";
-        certificate = "/etc/prosody/certs/jitmeet.example.com.crt";
-    }
-    av_moderation_component = "avmoderation.jitmeet.example.com"
-    speakerstats_component = "speakerstats.jitmeet.example.com"
-    conference_duration_component = "conferenceduration.jitmeet.example.com"
-    end_conference_component = "endconference.jitmeet.example.com"
-    -- we need bosh
-    modules_enabled = {
-        "bosh";
-        "pubsub";
-        "ping"; -- Enable mod_ping
-        "speakerstats";
-        "external_services";
-        "conference_duration";
-        "end_conference";
-        "muc_lobby_rooms";
-        "muc_breakout_rooms";
-        "av_moderation";
-        "room_metadata";
-    }
-    c2s_require_encryption = false
-    lobby_muc = "lobby.jitmeet.example.com"
-    breakout_rooms_muc = "breakout.jitmeet.example.com"
-    room_metadata_component = "metadata.jitmeet.example.com"
-    main_muc = "conference.jitmeet.example.com"
-    -- muc_lobby_whitelist = { "recorder.jitmeet.example.com" } -- Here we can whitelist jibri to enter lobby enabled rooms
-
-Component "conference.jitmeet.example.com" "muc"
-    restrict_room_creation = true
-    storage = "memory"
-    modules_enabled = {
-        "muc_meeting_id";
-        "muc_domain_mapper";
-        "polls";
-        --"token_verification";
-        "muc_rate_limit";
-    }
-    admins = { "focusUser@auth.jitmeet.example.com" }
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-
-Component "breakout.jitmeet.example.com" "muc"
-    restrict_room_creation = true
-    storage = "memory"
-    modules_enabled = {
-        "muc_meeting_id";
-        "muc_domain_mapper";
-        "muc_rate_limit";
-        "polls";
-    }
-    admins = { "focusUser@auth.jitmeet.example.com" }
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-
--- internal muc component
-Component "internal.auth.jitmeet.example.com" "muc"
-    storage = "memory"
-    modules_enabled = {
-        "ping";
-    }
-    admins = { "focusUser@auth.jitmeet.example.com", "jvb@auth.jitmeet.example.com" }
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-
-VirtualHost "auth.jitmeet.example.com"
-    modules_enabled = {
-        "limits_exception";
-    }
-    authentication = "internal_hashed"
-
--- Proxy to jicofo's user JID, so that it doesn't have to register as a component.
-Component "focus.jitmeet.example.com" "client_proxy"
-    target_address = "focusUser@auth.jitmeet.example.com"
-
-Component "speakerstats.jitmeet.example.com" "speakerstats_component"
-    muc_component = "conference.jitmeet.example.com"
-
-Component "conferenceduration.jitmeet.example.com" "conference_duration_component"
-    muc_component = "conference.jitmeet.example.com"
-
-Component "endconference.jitmeet.example.com" "end_conference"
-    muc_component = "conference.jitmeet.example.com"
-
-Component "avmoderation.jitmeet.example.com" "av_moderation_component"
-    muc_component = "conference.jitmeet.example.com"
-
-Component "lobby.jitmeet.example.com" "muc"
-    storage = "memory"
-    restrict_room_creation = true
-    muc_room_locking = false
-    muc_room_default_public_jids = true
-    modules_enabled = {
-        "muc_rate_limit";
-        "polls";
-    }
-
-Component "metadata.jitmeet.example.com" "room_metadata_component"
-    muc_component = "conference.jitmeet.example.com"
-    breakout_rooms_component = "breakout.jitmeet.example.com"

type/__jitsi_meet_domain/man.rst

@@ -11,24 +11,14 @@ DESCRIPTION
 -----------
 This type installs and configures the frontend for Jitsi-Meet.
 
-Additionally to regular Jitsi-Meet, users can load `DOMAIN/i/` and
-`DOMAIN/i/ROOM` for an interpreter-enabled interface; this is done with a
-patched version of Jitsi Simultaneous Interpretation (jsi; see references).
-At least a user with `interpreter` in their name must be present.
-
-
-This type supports "multi-domain" installations.
-
-New in April 2022: rooms are independent for each domain, that is:
+This supports "multi-domain" installations, notice that in such a setup, all
+rooms are shared across the different URLs, e.g.
 https://jitsi1.example.org/room1 and https://jitsi2.example.org/room1 are
-different rooms.
-Note however, that right now if using secured domains, users are still shared
-across any domains hosted in the same instance.
-One way to work around that could be to run multiple jicofos, but we do not
-want to bloat the servers.
-A better way is to patch jicofo, get in touch with the type authors if you want
-the gory details.
+equivalent.
 
+This is due to the underlying XMPP and signaling rooms being common.
+There might be a way to perform tricks on the Nginx-side to avoid this, but
+time is lacking :-).
 
 This assumes `__jitsi_meet` has already been ran on the target host, and,
 amongst others, that Jitsi was set up with `__target_host` as the Jitsi domain.
@@ -51,11 +41,6 @@ admin-email
 
 OPTIONAL PARAMETERS
 -------------------
-analytics-settings
-    This goes inside the `analytics` part of `config.js`.
-    Defaults to: `disabled: true`.
-    See: https://github.com/jitsi/jitsi-meet/blob/master/config.js
-
 channel-last-n
     Default value for the "last N" attribute.
     Defaults to 20. Set to -1 for unlimited.
@@ -75,10 +60,6 @@ start-video-muted
     Defaults to 10.
 
 
-state
-    Whether the domain is 'present' or 'absent', defaults to 'present'.
-
-
 turn-server
     The TURN server to be used.
     Defaults to `__target_host`.
@@ -93,15 +74,6 @@ video-constraints
     It must not have a trailing comma, see `constraints` in
     `__jitsi_meet_domain/files/config.js.sh`.
 
-branding-app-name
-    This will change `Jitsi Meet` in many places to the brand you desire.
-    Defaults to `Jitsi Meet`.
-
-branding-extra-body
-    This must be valid HTML, it will be included server-side and delivered to
-    clients alongside the default `index.html`.
-    This is useful if you would rather not replace the whole `index`, but
-    still want the chance to do some heavier branding / add instructions / etc.
 
 branding-json
     Path to a JSON file that will be served as the `dynamicBrandingUrl`.
@@ -109,12 +81,14 @@ branding-json
     `__jitsi_meet_domain/files/config.js.sh`.
     If not set, no branding will be set up.
 
+
 branding-index
     Path to an HTML file that will be served instead of Jitsi-Meet's default
     one.
     If not set, the default index file will be used.
     If set to `-`, the type's standard input will be used.
 
+
 branding-watermark
     Path to a png file that will be served instead of Jitsi-Meet's default
     one.
@@ -169,7 +143,6 @@ SEE ALSO
 --------
 - `__jitsi_meet(7)`
 - `__jitsi_meet_user(7)`
-- Jitsi Meet Simultaneous Interpretation: https://gitlab.com/mfmt/jsi
 
 
 AUTHORS

type/__jitsi_meet_domain/manifest

@@ -18,12 +18,9 @@ NOTICE_MESSAGE="$(cat "${__object}/parameter/notice-message")"
 START_VIDEO_MUTED="$(cat "${__object}/parameter/start-video-muted")"
 TURN_SERVER="$(cat "${__object}/parameter/turn-server")"
 VIDEO_CONSTRAINTS="$(cat "${__object}/parameter/video-constraints")"
-ANALYTICS_SETTINGS="$(cat "${__object}/parameter/analytics-settings")"
-BRANDING_APP_NAME="$(cat "${__object}/parameter/branding-app-name")"
 BRANDING_INDEX="$(cat "${__object}/parameter/branding-index")"
 BRANDING_JSON="$(cat "${__object}/parameter/branding-json")"
 BRANDING_WATERMARK="$(cat "${__object}/parameter/branding-watermark")"
-STATE="$(cat "${__object}/parameter/state")"
 
 if [ "${BRANDING_INDEX}" = "-" ]; then
 	BRANDING_INDEX="${__object}/stdin"
@@ -50,31 +47,11 @@ if [ -n "${BRANDING_JSON}" ]; then
 	DYNAMIC_BRANDING_URL="/branding.json"
 fi
 
-case "${STATE}" in
-	present)
-		# When adding the domain, Let's Encrypt must come before nginx
-		le_require=""
-		nginx_require="__letsencrypt_cert/${DOMAIN}"
-		;;
-	absent)
-		# When removing, nginx must come before Let's Encrypt
-		le_require="__file/etc/nginx/sites-enabled/${DOMAIN}.conf"
-		nginx_require=""
-		;;
-	*)
-		cat >> /dev/stderr <<-EOM
-		Unsupported state '${STATE}', must be 'present' or 'absent'.
-		EOM
-		exit 1
-		;;
-esac
-
 #
 # Deal with certbot
 #
 # use object id as domain
-require="${le_require}" __letsencrypt_cert "${DOMAIN}" \
-	--state "${STATE}" \
+__letsencrypt_cert "${DOMAIN}" \
 	--admin-email "${ADMIN_EMAIL}" \
 	--deploy-hook "service nginx reload" \
 	--webroot /usr/share/jitsi-meet
@@ -82,9 +59,8 @@ require="${le_require}" __letsencrypt_cert "${DOMAIN}" \
 # Create virtualhost for nginx
 # shellcheck source=type/__jitsi_meet_domain/files/nginx.sh
 . "${__type}/files/nginx.sh"  # This defines JITSI_NGINX_CONFIG
-require="${nginx_require}" __file \
+require="__letsencrypt_cert/${DOMAIN}" __file \
 	"/etc/nginx/sites-enabled/${DOMAIN}.conf" \
-	--state "${STATE}" \
 	--mode 0644 --source "-" <<EOF
 ${JITSI_NGINX_CONFIG}
 EOF
@@ -93,7 +69,6 @@ EOF
 # shellcheck source=type/__jitsi_meet_domain/files/config.js.sh
 . "${__type}/files/config.js.sh"  # This defines JITSI_CONFIG_JS
 __file "/etc/jitsi/meet/${DOMAIN}-config.js" \
-	--state "${STATE}" \
 	--mode 0644 --source "-" <<EOF
 ${JITSI_CONFIG_JS}
 EOF
@@ -102,7 +77,6 @@ EOF
 # shellcheck source=type/__jitsi_meet_domain/files/interface_config.js.sh
 . "${__type}/files/interface_config.js.sh"  # This defines JITSI_CONFIG_JS
 __file "/etc/jitsi/meet/${DOMAIN}-interface_config.js" \
-	--state "${STATE}" \
 	--mode 0644 --source "-" <<EOF
 ${JITSI_INTERFACE_CONFIG_JS}
 EOF
@@ -113,7 +87,7 @@ EOF
 #
 # Helper function to manage the state of the target branding file
 _var_state() {
-	if [ "${STATE}" = "present" ] && [ -n "${1}" ]; then
+	if [ -n "${1}" ]; then
 		echo "present"
 	else
 		echo "absent"
@@ -132,43 +106,3 @@ __file "/usr/share/jitsi-meet/images/watermark-${DOMAIN}.png" \
 	--mode 0644 \
 	--state "$(_var_state "${BRANDING_WATERMARK}")" \
 	--source "${BRANDING_WATERMARK}"
-# Simple body customisation
-__file "/usr/share/jitsi-meet/body-${DOMAIN}.html" \
-	--mode 0644 \
-	--state "$(_var_state "${STATE}")" \
-	--source "${__object}/parameter/branding-extra-body"
-
-#
-# Take care of prosody settings for the domain
-#
-JITSI_DOMAIN="${DOMAIN}"
-# Prosody settings for common components (jvb, focus, ...)
-# shellcheck source=type/__jitsi_meet_domain/files/prosody.cfg.lua.sh
-. "${__type}/files/prosody.cfg.lua.sh"  # This defines PROSODY_CONFIG
-__file "/etc/prosody/conf.avail/${DOMAIN}.cfg.lua" \
-	--group prosody \
-	--mode 0440 \
-	--state "${STATE}" \
-	--source '-' <<EOF
-${PROSODY_CONFIG}
-EOF
-__link "/etc/prosody/conf.d/${DOMAIN}.cfg.lua" \
-	--source "/etc/prosody/conf.avail/${DOMAIN}.cfg.lua" \
-	--state "${STATE}" \
-	--type symbolic
-
-if [ "${STATE}" = "present" ]; then
-	export require="${require} __file/etc/prosody/conf.avail/${DOMAIN}.cfg.lua __link/etc/prosody/conf.d/${DOMAIN}.cfg.lua"
-	__check_messages "prosody/${DOMAIN}" \
-		--pattern '^(__file|__link)/etc/prosody/conf[.](avail|d)/' \
-		--execute "$(cat <<EOF
-if [ ! -f "/var/lib/prosody/${DOMAIN}.crt" ]; then
-	echo | prosodyctl cert generate '${DOMAIN}';
-	ln -sf '/var/lib/prosody/${DOMAIN}.key' '/etc/prosody/certs/${DOMAIN}.key'
-	ln -sf '/var/lib/prosody/${DOMAIN}.crt' '/etc/prosody/certs/${DOMAIN}.crt'
-fi
-# Surprisingly, a reload is not enough
-service prosody restart
-EOF
-)"
-fi

type/__jitsi_meet_domain/parameter/default/analytics-settings

@@ -1 +0,0 @@
-        disabled: true

type/__jitsi_meet_domain/parameter/default/branding-app-name

@@ -1 +0,0 @@
-Jitsi Meet

type/__jitsi_meet_domain/parameter/default/state

@@ -1 +0,0 @@
-present

type/__jitsi_meet_domain/parameter/optional

@@ -1,13 +1,9 @@
-analytics-settings
 channel-last-n
 default-language
 notice-message
 start-video-muted
 turn-server
 video-constraints
-branding-app-name
 branding-json
 branding-index
-branding-extra-body
 branding-watermark
-state

type/__matrix_synapse/files/homeserver.yaml.sh

@@ -1406,7 +1406,7 @@ account_threepid_delegates:
 #
 # Does not apply to server administrators. Defaults to 'true'
 #
-enable_set_displayname: ${ENABLE_SET_DISPLAYNAME:?}
+#enable_set_displayname: false
 
 # Whether users are allowed to change their avatar after it has been
 # initially set. Useful when provisioning users based on the contents
@@ -1421,7 +1421,7 @@ enable_set_displayname: ${ENABLE_SET_DISPLAYNAME:?}
 #
 # Defaults to 'true'
 #
-enable_3pid_changes: ${ENABLE_3PID_CHANGES:?}
+#enable_3pid_changes: false
 
 # Users who register on this homeserver will automatically be joined
 # to these rooms.
@@ -2254,6 +2254,8 @@ password_config:
    # Uncomment to disable password login
    #
    #enabled: false
+   enableed: ${ENABLE_PASSWORDCONFIG:?}
+
 
    # Uncomment to disable authentication against the local password
    # database. This is ignored if \`enabled\` is false, and is only useful

type/__matrix_synapse/man.rst

@@ -1,5 +1,5 @@
 cdist-type__matrix_synapse(7)
-=============================
+======================
 
 NAME
 ----
@@ -8,7 +8,7 @@ cdist-type__matrix_synapse - Install and configure Synapse, a Matrix homeserver
 
 DESCRIPTION
 -----------
-This type installs and configures the Synapse Matrix homeserver. This is a
+This type install and configure the Synapse Matrix homeserver. This is a
 signleton type.
 
 
@@ -52,13 +52,13 @@ ldap-base-dn
   Base DN of your LDAP tree.
 
 ldap-uid-attribute
-  LDAP attribute mapping to Synapse's uid field, default to uid.
+  LDAP attriute mapping to Synapse's uid field, default to uid.
 
 ldap-mail-attribute
-  LDAP attribute mapping to Synapse's mail field, default to mail.
+  LDAP attriute mapping to Synapse's mail field, default to mail.
 
 ldap-name-attribute
-  LDAP attribute mapping to Synapse's name field, default to givenName.
+  LDAP attriute mapping to Synapse's name field, default to givenName.
 
 ldap-bind-dn
   User used to authenticate against your LDAP server in 'search' mode.
@@ -81,7 +81,7 @@ smtp-host
   The hostname of the outgoing SMTP server to use. Defaults to 'localhost'.
 
 smtp-port
-  The port on the mail server for outgoing SMTP. Defaults to 25.
+  # The port on the mail server for outgoing SMTP. Defaults to 25.
 
 smtp-user
   Username for authentication to the SMTP server. By
@@ -162,12 +162,6 @@ rc-login-burst
 registration-allows-email-pattern
     Only allow email addresses matching specified filter. Can be specified multiple times. A pattern must look like `.*@vector\.im`.
 
-disable-displayname-changes
-  Whether users are allowed to change their displayname after it has been initially set.
-
-disable-3pid-changes
-  Whether users can change the 3PIDs associated with their accounts (email address and msisdn).
-
 auto-join-room
   Room where newly-registered users are automatically added. Can be specified multiple times.
 
@@ -292,6 +286,11 @@ worker-mode
   processes are called 'workers'. Please read the  WORKER MODE section of this
   manpage before enabling, as extra work and considerations are required.
 
+enable-passwordconfig
+   For removing user/password tab on login screen.
+   when it set saml2-login, it remove user/password tab on login-screen.
+   default is true.
+
 PERFORMANCE
 -----------
 

type/__matrix_synapse/manifest

@@ -169,6 +169,7 @@ fi
 # Registrations and users.
 ALLOW_GUEST_ACCESS=$(get_boolean_for 'allow-guest-access')
 ENABLE_REGISTRATIONS=$(get_boolean_for 'enable-registrations')
+ENABLE_PASSWORDCONFIG=$(get_boolean_for 'enable-passwordconfig')
 USER_DIRECTORY_SEARCH_ALL_USERS=$(get_boolean_for 'user-directory-search-all-users')
 export ALLOW_GUEST_ACCESS ENABLE_REGISTRATIONS USER_DIRECTORY_SEARCH_ALL_USERS
 
@@ -181,18 +182,6 @@ if [ -f "$__object/parameter/registration-requires-email" ]; then
 	export REGISTRATION_REQUIRES_EMAIL=1
 fi
 
-ENABLE_SET_DISPLAYNAME='true'
-if [ -f "$__object/parameter/disable-displayname-changes" ]; then
-	ENABLE_SET_DISPLAYNAME='false'
-fi
-export ENABLE_SET_DISPLAYNAME
-
-ENABLE_3PID_CHANGES='true'
-if [ -f "$__object/parameter/disable-3pid-changes" ]; then
-	ENABLE_3PID_CHANGES='false'
-fi
-export ENABLE_3PID_CHANGES
-
 if [ -f "$__object/parameter/auto-join-room" ]; then
 	AUTO_JOIN_ROOMS="$(cat "$__object/parameter/auto-join-room")"
 	export AUTO_JOIN_ROOMS

type/__matrix_synapse/parameter/boolean

@@ -18,5 +18,4 @@ enable-message-retention-policy
 worker-mode
 enable-url-preview
 enable-3pid-lookups
-disable-3pid-changes
-disable-displayname-changes
+enable-passwordconfig

type/__matrix_synapse/parameter/default/enable-passwordconfig

@@ -0,0 +1 @@
+true

type/__nginx_vhost/manifest

@@ -32,7 +32,7 @@ case "$os" in
 
 		require="$install_reqs" __start_on_boot nginx
 
-		export NGINX_SITEDIR="$nginx_confdir/http.d"
+		export NGINX_SITEDIR="$nginx_confdir/conf.d"
 		export NGINX_CERTDIR="$nginx_confdir/ssl"
 		export NGINX_SNIPPETSDIR="$nginx_confdir/snippets"
 		export NGINX_WEBROOT="/var/www"
@@ -158,7 +158,6 @@ for snippet in hsts 301-to-https; do
 done
 
 # Install vhost.
-require="$install_reqs" __directory "$NGINX_SITEDIR"
-require="__directory/$NGINX_SITEDIR" __file "$NGINX_SITEDIR/$__object_id.conf" \
+require="$install_reqs" __file "$NGINX_SITEDIR/$__object_id.conf" \
 	--source "$vhost_conf" \
 	--mode 0644

type/__opendkim/files/opendkim.conf.sh

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 # Generate an opendkim.conf(5) file for opendkim(8).
 
-echo "# Managed remotely, manual changes will be lost."
 
 # Optional chdir(2)
 if [ "$BASEDIR" ];
@@ -34,8 +33,8 @@ then
 fi
 
 # Key and Domain tables
-echo "KeyTable ${CFG_DIR}/KeyTable"
-echo "SigningTable ${CFG_DIR}/SigningTable"
+echo 'KeyTable /etc/opendkim/KeyTable'
+echo 'SigningTable /etc/opendkim/SigningTable'
 
 # Required socket to listen on
 printf "Socket %s\n" "${SOCKET:?}"

type/__opendkim/man.rst

@@ -14,8 +14,8 @@ installation and basic configuration of an instance of OpenDKIM.
 Note that this type does not generate or ensure that a key is present: use
 `cdist-type__opendkim-genkey(7)` for that.
 
-Note that this type is currently only implemented for Alpine Linux and FreeBSD.
-Please contribute an implementation if you can.
+Note that this type is currently only implemented for Alpine Linux. Please
+contribute an implementation if you can.
 
 
 REQUIRED PARAMETERS
@@ -42,9 +42,8 @@ umask
   Set the umask for the socket and PID file.
 
 userid
-  Change the user the opendkim program is to run as.
-  By default, Alpine Linux's OpenRC service will set this to `opendkim` on the
-  command-line and FreeBSD's rc will set it to `mailnull`.
+  Change the user the opendkim program is to run as. By default, Alpine Linux's
+  OpenRC service will set this to `opendkim` on the command-line.
 
 custom-config
   The string following this parameter is appended as-is in the configuration, to
@@ -87,12 +86,11 @@ SEE ALSO
 AUTHORS
 -------
 Joachim Desroches <joachim.desroches@epfl.ch>
-Evilham <contact@evilham.com>
 
 
 COPYING
 -------
-Copyright \(C) 2022 Joachim Desroches, Evilham. You can redistribute it
+Copyright \(C) 2021 Joachim Desroches. You can redistribute it
 and/or modify it under the terms of the GNU General Public License as
 published by the Free Software Foundation, either version 3 of the
 License, or (at your option) any later version.

type/__opendkim/manifest

@@ -20,23 +20,16 @@
 
 os=$(cat "${__global:?}/explorer/os")
 
-CFG_DIR="/etc/opendkim"
-service="opendkim"
 case "$os" in
 'alpine')
 	:
 	;;
-'freebsd')
-	CFG_DIR="/usr/local/etc/mail"
-	service="milter-opendkim"
-	;;
 *)
 	printf "__opendkim does not yet support %s.\n" "$os" >&2
 	printf "Please contribute an implementation if you can.\n" >&2
 	exit 1
 	;;
 esac
-export CFG_DIR
 
 __package opendkim
 
@@ -75,7 +68,7 @@ fi
 
 # Generate and deploy configuration file.
 source_file="${__object:?}/files/opendkim.conf"
-target_file="${CFG_DIR}/opendkim.conf"
+target_file="/etc/opendkim/opendkim.conf"
 
 mkdir -p "${__object:?}/files"
 
@@ -90,22 +83,9 @@ fi
 require="__package/opendkim" __file "$target_file" \
 	--source "$source_file" --mode 0644
 
-require="__package/opendkim" __start_on_boot "${service}"
+require="__package/opendkim" __start_on_boot opendkim
 
-# Ensure Key and Signing tables exist and have proper permissions
-key_table="${CFG_DIR}/KeyTable"
-signing_table="${CFG_DIR}/SigningTable"
-
-require="__package/opendkim" \
-	__file "${key_table}" \
-	--mode 444
-
-require="__package/opendkim" \
-	__file "${signing_table}" \
-	--mode 444
-
-require="__file${target_file} __file${key_table}
-		__file${signing_table} __start_on_boot/${service}" \
+require="__file${target_file}" \
 	__check_messages opendkim \
 		--pattern "^__file${target_file}" \
-		--execute "service ${service} restart"
+		--execute "service opendkim restart"

type/__opendkim_genkey/gencode-remote

@@ -30,8 +30,7 @@ fi
 
 DIRECTORY="/var/db/dkim/"
 if [ -f "${__object:?}/parameter/directory" ]; then
-	# Be forgiving about a lack of trailing slash
-	DIRECTORY="$(sed -E 's!([^/])$!\1/!' < "${__object:?}/parameter/directory")"
+	DIRECTORY="$(cat "${__object:?}/parameter/directory")"
 fi
 
 # Boolean parameters
@@ -45,12 +44,7 @@ if [ -f "${__object:?}/parameters/unrestricted" ]; then
 	RESTRICTED=
 fi
 
-user="$(cat "${__object:?}/user")"
-group="$(cat "${__object:?}/group")"
-
 if ! [ -f "${DIRECTORY}${SELECTOR}.private" ]; then
 	echo "opendkim-genkey $BITS --domain=$DOMAIN --directory=$DIRECTORY $RESTRICTED --selector=$SELECTOR $SUBDOMAINS"
-	echo "chown ${user}:${group} ${DIRECTORY}${SELECTOR}.private"
-	# This is usually generated, if it weren't we do not want to fail
-	echo "chown ${user}:${group} ${DIRECTORY}${SELECTOR}.txt || true"
+	echo "chown opendkim:opendkim ${DIRECTORY}${SELECTOR}.private"
 fi

type/__opendkim_genkey/man.rst

@@ -17,8 +17,8 @@ will be added to the OpenDKIM signing table, using either the domain or the
 provided key for the `domain:selector:keyfile` value in the table. An existing
 key will not be overwritten.
 
-Currently, this type is only implemented for Alpine Linux and FreeBSD.
-Please contribute an implementation if you can.
+Currently, this type is only implemented for Alpine Linux. Please contribute an
+implementation if you can.
 
 REQUIRED PARAMETERS
 -------------------
@@ -85,12 +85,11 @@ SEE ALSO
 AUTHORS
 -------
 Joachim Desroches <joachim.desroches@epfl.ch>
-Evilham <contact@evilham.com>
 
 
 COPYING
 -------
-Copyright \(C) 2022 Joachim Desroches, Evilham. You can redistribute it
+Copyright \(C) 2021 Joachim Desroches. You can redistribute it
 and/or modify it under the terms of the GNU General Public License as
 published by the Free Software Foundation, either version 3 of the
 License, or (at your option) any later version.

type/__opendkim_genkey/manifest

@@ -21,18 +21,10 @@
 
 os=$(cat "${__global:?}/explorer/os")
 
-CFG_DIR="/etc/opendkim"
-user="opendkim"
-group="opendkim"
 case "$os" in
 'alpine')
 	:
 ;;
-'freebsd')
-	CFG_DIR="/usr/local/etc/mail"
-	user="mailnull"
-	group="mailnull"
-;;
 *)
 	cat <<- EOF >&2
 	__opendkim_genkey currently only supports Alpine Linux. Please
@@ -40,9 +32,6 @@ case "$os" in
 	EOF
 ;;
 esac
-# Persist user and group for gencode-remote
-printf '%s' "${user}" > "${__object:?}/user"
-printf '%s' "${group}" > "${__object:?}/group"
 
 SELECTOR="$(cat "${__object:?}/parameter/selector")"
 DOMAIN="$(cat "${__object:?}/parameter/domain")"
@@ -50,8 +39,7 @@ DOMAIN="$(cat "${__object:?}/parameter/domain")"
 DIRECTORY="/var/db/dkim/"
 if [ -f "${__object:?}/parameter/directory" ];
 then
-	# Be forgiving about a lack of trailing slash
-	DIRECTORY="$(sed -E 's!([^/])$!\1/!' < "${__object:?}/parameter/directory")"
+	DIRECTORY="$(cat "${__object:?}/parameter/directory")"
 fi
 
 SIGKEY="${DOMAIN:?}"
@@ -60,26 +48,19 @@ then
 	SIGKEY="$(cat "${__object:?}/parameter/sigkey")"
 fi
 
-# Ensure the key-container directory exists with the proper permissions
-__directory "${DIRECTORY}" \
-	--mode 0750 \
-	--owner "${user}" --group "${group}"
-
-# OS-specific code
-case "$os" in
-'alpine')
-	# This is needed for opendkim-genkey
 __package opendkim-utils
-;;
-esac
 
-key_table="${CFG_DIR}/KeyTable"
-signing_table="${CFG_DIR}/SigningTable"
+require='__package/opendkim-utils' \
+	__file /etc/opendkim/KeyTable
+require='__package/opendkim-utils' \
+	__file /etc/opendkim/SigningTable
 
+require='__file/etc/opendkim/KeyTable' \
 	__line "line-key-${__object_id:?}" \
-	--file "${key_table}" \
+		--file /etc/opendkim/KeyTable \
 		--line "${SELECTOR:?}._domainkey.${DOMAIN:?} ${DOMAIN:?}:${SELECTOR:?}:${DIRECTORY:?}${SELECTOR:?}.private"
 
+require='__file/etc/opendkim/SigningTable' \
 	__line "line-sig-${__object_id:?}" \
-	--file "${signing_table}" \
+		--file /etc/opendkim/SigningTable \
 		--line "${SIGKEY:?} ${SELECTOR:?}._domainkey.${DOMAIN:?}"

type/__runit/manifest

@@ -6,14 +6,7 @@ os="$(cat "${__global}/explorer/os")"
 case "${os}" in
 	debian|devuan)
 		# zero-config sysvinit and systemd compatibility
-		os_version="$(cat "${__global}/explorer/os_version")"
-		debian_package="runit-run"
-		case "${os_version}" in
-			beowulf)
-				debian_package="runit"
-			;;
-		esac
-		__package "${debian_package}"
+		__package runit-run
 	;;
 	freebsd)
 		__key_value \

type/__runit_service/manifest

@@ -33,25 +33,18 @@ if [ "${state}" != "present" ]; then
 	exit
 fi
 
-# Setup run file
-__file --state "${state}" --mode 0550 --source "${source}" \
-	--onchange "sv restart '${sv}' || true" \
-	"${run_file}"
-export require="${require} __file${run_file}"
-
 if [ -f "${__object}/parameter/log" ]; then
 	# Setup logger if requested
-	logdir="/var/log/runit"
-	__directory --parents "${svdir}/${sv}/log"
-	__directory --state absent "${svdir}/${sv}/log/main"  # Remove lingering old fashioned log
-	__directory --parents "${logdir}/${sv}"
-	export require="${require} __directory${svdir}/${sv}/log __directory${logdir}/${sv}"
+	__directory --parents "${svdir}/${sv}/log/main"
+	export require="${require} __directory${svdir}/${sv}/log/main"
 	__file "${svdir}/${sv}/log/run" \
 		--state "${state}" \
 		--mode 0755 \
-		--onchange "sv restart '${sv}/log' || true" \
 		--source "-" <<EOF
 #!/bin/sh
-exec svlogd -tt '${logdir}/${sv}'
+exec svlogd -tt ./main
 EOF
 fi
+
+# Setup run file
+__file --state "${state}" --mode 0755 --source "${source}" "${run_file}"

type/__single_binary_service/explorer/explorer-version

@@ -1,10 +0,0 @@
-#!/bin/sh -e
-
-BIN_PREFIX="/usr/local/bin"
-SERVICE_NAME="${__object_id}"
-
-VERSION_FILE="${BIN_PREFIX}/.${SERVICE_NAME}.cdist.version"
-
-if [ -f "${VERSION_FILE}" ]; then
-	cat "${VERSION_FILE}"
-fi

type/__single_binary_service/man.rst

@@ -1,195 +0,0 @@
-cdist-type__single_binary_service(7)
-====================================
-
-NAME
-----
-cdist-type__single_binary_service - Setup a single-binary service
-
-
-DESCRIPTION
------------
-This type is designed to easily deploy and configure a single-binary service
-named `${__object_id}`.
-
-A good example of this are Prometheus exporters.
-
-This type makes certain assumptions that might not be correct on your system.
-If you need more flexibility, please get in touch and provide a use-case
-(and hopefully a backwards-compatible patch).
-
-This type will place the downloaded binary and, if requested, other extra
-binaries in `/usr/local/bin`.
-
-If a `--config-file-source` is provided, it will be placed under:
-`/etc/${__object_id}.conf`.
-
-This type supports services managed by `__runit(7)` when `systemd` is not
-the init system being used.
-
-
-REQUIRED PARAMETERS
--------------------
-checksum
-    This will be passed verbatim to `__download(7)`.
-    Use something like `sha256:...`.
-
-url
-    This will be passed verbatim to `__download(7)`.
-
-version
-    This type will use a thumbstone file with a "version" number to track
-    whether or not a service must be updated.
-    This thumbstone file is placed under
-    `/usr/local/bin/.${__object_id}.cdist.version`.
-
-
-BOOLEAN PARAMETERS
-------------------
-unpack
-    If present, the contents of `--url` will be treated as an archive to be
-    unpacked with `__unpack(7)`.
-    See also `--unpack-args` and `--extra-binary`.
-
-do-not-manage-user
-    Always considered present when `--user` is `root`.
-    If present, the user in `--user` will not be managed by this type with
-    `__user`, this means it *must* exist beforehand when installing the service
-    and it will not be removed by this type.
-
-
-OPTIONAL PARAMETERS
--------------------
-config-file-source
-    If present, this file's contents will be placed under
-    `/etc/${__object_id}.conf` with permissions `0440` and ownership assigned to
-    `--user` and `--group`.
-    If `-` is passed, this type's `stdin` will be used.
-
-user
-    The user under which the service will run. Defaults to `root`.
-    If this user is not `root` and `--do-not-manage-user` is not present,
-    this user will be created or removed as per the `--state` parameter.
-
-user-home-dir
-    Does not have an effect if `--do-not-manage-user` is used or `--user` is
-    `root`.
-    The home directory of the service user. It will be created.
-    Defaults to `/nonexistent`, in this case the home directory will not be
-    created.
-
-group
-    The group under which the service will run. Defaults to `--user`.
-
-state
-    Whether the service is to be `present` (default) or `absent`.
-    When `absent`, this type will clean any binaries listed in `--extra-binary`
-    and also the config file as described in `--config-file-source`.
-
-binary
-    This will be the binary name. Defaults to `${__object_id}`.
-    If `--unpack` is used, a binary with this name must be unpacked.
-    Otherwise, the contents of `--url` will be placed under this binary name.
-
-env
-    An `env` file consiting of `ENVIRONMENT_VARIABLE=VALUE`, one variable per
-    line.
-    Empty lines and those starting with `#` are ignored.
-
-service-args
-    Any extra arguments to pass along with `--service-exec`. Beware that any
-    service-args having the format `--config=/etc/foo.cfg` should be
-    represented in the following way `--service-exec='--config=/etc/foo.cfg'`
-
-service-exec
-    The executable to use for this service.
-    Defaults to `/usr/local/bin/BINARY_NAME` where `BINARY_NAME` is the
-    resulting value of `--binary`.
-
-service-definition
-    The service definition to be used as an override.
-    Note that this type decides dinammically between runit and systemd, and
-    you can currently only define either a systemd unit or a runit script here.
-    Use this parameter only for testing and get in touch to discuss how your
-    particular use-case can be supported by the type.
-
-service-description
-    The service description to be used in, e.g. the systemd unit file.
-    Defaults to `cdist-managed '${__object_id}' service`.
-
-unpack-args
-    Only has an effect if `--unpack` is used.
-    These arguments will be passed verbatim to `__unpack(7)`.
-    Very useful as this type assumes the archive does not have the binaries in
-    subdirectories; that can be worked around with
-    `--unpack-args '--tar-strip 1'`.
-
-unpack-extension
-    Only has an effect if `--unpack` is used.
-    The file extension of the file to unpack, defaults to `.tar.gz`.
-
-working-directory
-    If set, the working directory with which the service will be started.
-
-
-OPTIONAL MULTIPLE PARAMETERS
-----------------------------
-extra-binary
-    Only useful with `--unpack`.
-    If passed, these binaries will also be installed when `--state` is `present`
-    and removed when `--state` is `absent`.
-    Handle with care :-).
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-	# Install and enable the ipmi_exporter service
-	#   The variables are defined in the manifest previously
-	__single_binary_service ipmi_exporter \
-		--user "${USER}" \
-		--service-args ' --config.file=/etc/ipmi_exporter.conf' \
-		--version "${SHOULD_VERSION}" \
-		--checksum "${CHECKSUM}" \
-		--url "${DOWNLOAD_URL}" \
-		--state "present" \
-		--unpack \
-		--unpack-args "--tar-strip 1" \
-		--config-file-source '-' <<-EOF
-	# Remotely managed, changes will be lost
-	# [...] config contents goes here
-	EOF
-
-	# Remove the ipmi_exporter service along with the user and its config
-	__single_binary_service ipmi_exporter \
-		--user "${USER}" \
-		--version "${SHOULD_VERSION}" \
-		--checksum "${CHECKSUM}" \
-		--url "${DOWNLOAD_URL}" \
-		--state "absent"
-
-	# Same, but the service was using my user! Let's not delete that!
-	__single_binary_service ipmi_exporter \
-		--user "evilham" \
-		--do-not-manage-user \
-		--version "${SHOULD_VERSION}" \
-		--checksum "${CHECKSUM}" \
-		--url "${DOWNLOAD_URL}" \
-		--state "absent"
-
-
-SEE ALSO
---------
-- `__download(7)`
-- `__unpack(7)`
-
-
-AUTHORS
--------
-Evilham <contact@evilham.com>
-
-
-COPYING
--------
-Copyright \(C) 2022 Evilham.

type/__single_binary_service/manifest

@@ -1,305 +0,0 @@
-#!/bin/sh -e
-SERVICE_NAME="${__object_id}"
-
-OS="$(cat "${__global}/explorer/os")"
-
-case "${OS}" in
-	debian|devuan)
-		SUPER_USER_GROUP=root
-		ETC_DIR="/etc"
-	;;
-	*bsd)
-		SUPER_USER_GROUP=wheel
-		ETC_DIR="/usr/local/etc"
-	;;
-	*)
-		echo "Your OS '${OS}' is currently not supported." >&2
-		exit 1
-	;;
-esac
-INIT="$(cat "${__global}/explorer/init")"
-
-case "${INIT}" in
-	systemd)
-		service_definition_require="__systemd_unit/${SERVICE_NAME}.service"
-		service_command="service ${SERVICE_NAME} %s"
-	;;
-	runit|sysvinit)
-		# We will use runit to manage these services
-		__runit
-		export require="__runit"
-		service_definition_require="__runit_service/${SERVICE_NAME}"
-		service_command="sv %s ${SERVICE_NAME}"
-	;;
-	*)
-		echo "Init system ${INIT}' is currently not supported." >&2
-		exit 1
-	;;
-esac
-
-BIN_DIR="/usr/local/bin"
-
-# Ensure the target bin dir exists
-#   Care, we never want to remove it :-D
-__directory "${BIN_DIR}" \
-	--state "exists" \
-	--mode 0755
-export require="${require} __directory${BIN_DIR}"
-
-STATE="$(cat "${__object}/parameter/state")"
-USER="$(cat "${__object}/parameter/user")"
-GROUP="$(cat "${__object}/parameter/group" 2>/dev/null || true)"
-if [ -z "${GROUP}" ]; then
-	if [ "${USER}" != "root" ]; then
-		GROUP="${USER}"
-	else
-		GROUP="${SUPER_USER_GROUP}"
-	fi
-fi
-
-
-BINARY="$(cat "${__object}/parameter/binary" 2>/dev/null || true)"
-if [ -z "${BINARY}" ]; then
-	BINARY="${SERVICE_NAME}"
-fi
-EXTRA_BINARIES="$(cat "${__object}/parameter/extra-binary" 2>/dev/null || true)"
-# This only makes sense for file archives
-if [ -n "${EXTRA_BINARIES}" ] && [ -f "${__object}/parameter/unpack" ]; then
-	cat >&2 <<-EOF
-	You cannot specify extra binaries without the --unpack argument.
-	Make sure that the --url argument points to a file archive.
-EOF
-fi
-
-SERVICE_EXEC="$(cat "${__object}/parameter/service-exec" 2>/dev/null || true)"
-if [ -z "${SERVICE_EXEC}" ]; then
-	SERVICE_EXEC="${BIN_DIR}/${BINARY}"
-fi
-SERVICE_ARGS="$(cat "${__object}/parameter/service-args")"
-SERVICE_EXEC="${SERVICE_EXEC} ${SERVICE_ARGS}"
-
-SERVICE_DESCRIPTION="$(cat "${__object}/parameter/service-description" \
-	2>/dev/null || true)"
-if [ -z "${SERVICE_DESCRIPTION}" ]; then
-	SERVICE_DESCRIPTION="cdist-managed '${SERVICE_NAME}' service"
-fi
-
-SERVICE_DEFINITION="$(cat "${__object}/parameter/service-definition" 2>/dev/null || true)"
-
-WORKING_DIRECTORY_PATH="$(cat "${__object}/parameter/working-directory" 2>/dev/null || true)"
-if [ -n "${WORKING_DIRECTORY_PATH}" ]; then
-	WORKING_DIRECTORY_SYSTEMD="WorkingDirectory=${WORKING_DIRECTORY_PATH}"
-	WORKING_DIRECTORY_RUNIT="cd '${WORKING_DIRECTORY_PATH}'"
-fi
-
-DOWNLOAD_URL="$(cat "${__object}/parameter/url")"
-CHECKSUM="$(cat "${__object}/parameter/checksum")"
-SHOULD_VERSION="$(cat "${__object}/parameter/version")"
-
-# Create a user for the service if it is not root
-USER_HOME_DIR="/root"
-if [ "${USER}" != "root" ] && \
-		[ ! -f "${__object}/parameter/do-not-manage-user" ]; then
-	if [ "${STATE}" = "absent" ]; then
-		# When removing, ensure user is not being used
-		user_require="${service_definition_require}"
-	fi
-	USER_HOME_DIR="$(cat "${__object}/parameter/user-home-dir")"
-	if [ "${USER_HOME_DIR}" != "/nonexistent" ]; then
-		USER_CREATE_HOME="--create-home"
-	fi
-	require="${require} ${user_require}" __user "${USER}" \
-		--system \
-		--state "${STATE}" \
-		--home "${USER_HOME_DIR}" \
-		--comment "cdist-managed service user" \
-		${USER_CREATE_HOME}
-	# Track dependencies
-	service_require="${service_require} __user/${USER}"
-fi
-
-# Place config file if necessary
-CONFIG_FILE_DEST="${ETC_DIR}/${SERVICE_NAME}.conf"
-CONFIG_FILE_SOURCE="$(cat "${__object}/parameter/config-file-source" 2>/dev/null || true)"
-if [ "${CONFIG_FILE_SOURCE}" = "-" ]; then
-	CONFIG_FILE_SOURCE="${__object}/stdin"
-fi
-if [ -n "${CONFIG_FILE_SOURCE}" ] && [ "${STATE}" = "present" ]; then
-	require="${require} __user/${USER}" __file \
-		"${CONFIG_FILE_DEST}" \
-		--owner "${USER}" \
-		--group "${GROUP}" \
-		--mode "0440" \
-		--source "${CONFIG_FILE_SOURCE}"
-	service_require="${service_require} __file${CONFIG_FILE_DEST}"
-fi
-
-
-
-# These messages will trigger a service restart (overridden for systemd)
-service_config_reload_pattern="^__file${CONFIG_FILE_DEST}"
-
-# This should setup the object in $service_definition_require
-# See above.
-case "${INIT}" in
-	systemd)
-		if [ -z "${SERVICE_DEFINITION}" ]; then
-			SYSTEMD_ENV_FILE="/etc/systemd/system/${SERVICE_NAME}.env"
-			__file "${SYSTEMD_ENV_FILE}" \
-				--mode 0400 \
-				--source "${__object}/parameter/env"
-			# We need to take into account the envionment file for systemd too
-			service_config_reload_pattern="(${service_config_reload_pattern}|^__file${SYSTEMD_ENV_FILE})"
-
-			SERVICE_DEFINITION="$(cat <<EOF
-[Unit]
-Description=${SERVICE_DESCRIPTION}
-After=network.target
-
-[Service]
-Type=simple
-
-User=${USER}
-Group=${GROUP}
-ExecStart=${SERVICE_EXEC}
-Restart=always
-EnvironmentFile=${SYSTEMD_ENV_FILE}
-${WORKING_DIRECTORY_SYSTEMD}
-
-[Install]
-WantedBy=multi-user.target
-EOF
-)"
-		fi
-		__systemd_unit "${SERVICE_NAME}.service" \
-			--source "-" \
-			--state "${STATE}" \
-			--enablement-state "enabled" <<EOF
-${SERVICE_DEFINITION}
-EOF
-	;;
-	runit|sysvinit)
-		if [ -z "${SERVICE_DEFINITION}" ]; then
-			RUNIT_ENV="$(sed -Ee 's!^([[:alnum:]_]+)=(.*)$!export \1=\2!' "${__object}/parameter/env")"
-			SERVICE_DEFINITION="$(cat <<EOF
-#!/bin/sh -e
-${WORKING_DIRECTORY_RUNIT}
-# User-provided environment
-${RUNIT_ENV}
-# System vars
-export HOME="\$(getent passwd '${USER}' | cut -d: -f6)"
-export USER="${USER}"
-export GROUP="${GROUP}"
-
-exec 2>&1
-exec chpst -u "${USER}:${GROUP}" ${SERVICE_EXEC}
-EOF
-)"
-		fi
-		__runit_service "${SERVICE_NAME}" \
-			--state "${STATE}" \
-			--log \
-			--source - <<EOF
-${SERVICE_DEFINITION}
-EOF
-	;;
-esac
-service_require="${service_require} ${service_definition_require}"
-
-# Proceed after user and service description have been prepared
-export require="${require} ${service_require}"
-
-VERSION_FILE="${BIN_DIR}/.${SERVICE_NAME}.cdist.version"
-IS_VERSION="$(cat "${__object}/explorer/explorer-version")"
-
-
-if [ "${STATE}" = "absent" ]; then
-	# Perform cleanup of generated files
-	for bin_file in ${BINARY} ${EXTRA_BINARIES}; do
-		__file "${BIN_DIR}/${bin_file}" --state "absent"
-	done
-	__file "${VERSION_FILE}" --state "absent"
-	__file "${CONFIG_FILE_DEST}" --state "absent"
-fi
-
-if [ "${STATE}" != "present" ]; then
-	exit
-fi
-
-sv_cmd() {
-	# This is intentional
-	# shellcheck disable=SC2059
-	printf "${service_command}" "$1"
-}
-
-if [ "${SHOULD_VERSION}" != "${IS_VERSION}" ]; then
-	# We are installing the service and there has been a version change
-	# (or it is first-time install)
-	TMP_PATH="/tmp/${SERVICE_NAME}-${SHOULD_VERSION}"
-
-	# This is what will stop the service, replace the binaries and
-	# start the service again
-	perform_service_upgrade="$(cat <<EOF
-$(sv_cmd stop) || true
-if [ -f '${TMP_PATH}' ]; then
-	chown root:${SUPER_USER_GROUP} '${TMP_PATH}'
-	chmod 0555 '${TMP_PATH}'
-	cp -af '${TMP_PATH}' '${BIN_DIR}/${BINARY}'
-else
-	for bin_file in ${BINARY} ${EXTRA_BINARIES}; do
-		bin_path="${TMP_PATH}/\${bin_file}"
-		chown root:${SUPER_USER_GROUP} "\${bin_path}"
-		chmod 0555 "\${bin_path}"
-		cp -af "\${bin_path}" "${BIN_DIR}/\${bin_file}"
-	done
-fi
-$(sv_cmd start) || true
-EOF
-)"
-
-	if [ -f "${__object}/parameter/unpack" ]; then
-		UNPACK_EXTENSION="$(cat "${__object}/parameter/unpack-extension")"
-		UNPACK_ARGS="$(cat "${__object}/parameter/unpack-args" \
-			2>/dev/null || true)"
-		# Download packed file
-		__download "${TMP_PATH}${UNPACK_EXTENSION}" \
-			--url "${DOWNLOAD_URL}" \
-			--download remote \
-			--sum "${CHECKSUM}"
-
-		# Unpack file and also perform service upgrade
-		# shellcheck disable=SC2086
-		require="__download${TMP_PATH}${UNPACK_EXTENSION}" \
-			__unpack "${TMP_PATH}${UNPACK_EXTENSION}" \
-			${UNPACK_ARGS} \
-			--destination "${TMP_PATH}"
-		version_bump_require="__unpack${TMP_PATH}${UNPACK_EXTENSION}"
-	else
-		# Create temp directory
-		__directory "${TMP_PATH}"
-		# Download binary directoy to the temp directory with the
-		# specified binary name
-		require="__directory${TMP_PATH}" __download \
-			"${TMP_PATH}/${BINARY}" \
-			--url "${DOWNLOAD_URL}" \
-			--download remote \
-			--sum "${CHECKSUM}"
-		version_bump_require="__download${TMP_PATH}/${BINARY}"
-	fi
-
-	# Perform update of cdist-managed version file
-	# And also perform service upgrade
-	# This is a bug if service_upgrade fails >,<
-	printf "%s" "${SHOULD_VERSION}" | \
-		require="${version_bump_require}" __file \
-			"${VERSION_FILE}" \
-			--onchange "${perform_service_upgrade}" \
-			--source "-"
-else
-	# We only restart here if there was a config or env change
-	# but there was not a version change
-	require="${service_require}" __check_messages \
-		"single_binary_service_${__object_id}" \
-		--pattern "${service_config_reload_pattern}" \
-		--execute "$(sv_cmd restart)"
-fi

type/__single_binary_service/parameter/boolean

@@ -1,2 +0,0 @@
-do-not-manage-user
-unpack

type/__single_binary_service/parameter/default/state

@@ -1 +0,0 @@
-present

type/__single_binary_service/parameter/default/unpack-extension

@@ -1 +0,0 @@
-.tar.gz

type/__single_binary_service/parameter/default/user

@@ -1 +0,0 @@
-root

type/__single_binary_service/parameter/default/user-home-dir

@@ -1 +0,0 @@
-/nonexistent

type/__single_binary_service/parameter/optional

@@ -1,14 +0,0 @@
-config-file-source
-env
-user
-group
-state
-binary
-service-args
-service-exec
-service-description
-service-definition
-unpack-extension
-unpack-args
-user-home-dir
-working-directory

type/__single_binary_service/parameter/optional_multiple

@@ -1 +0,0 @@
-extra-binary

type/__single_binary_service/parameter/required

@@ -1,3 +0,0 @@
-url
-checksum
-version

type/__systemd_network/gencode-remote

@@ -1,20 +0,0 @@
-#!/bin/sh -e
-#
-# 2022 Joachim Desroches (joachim.desroches@epfl.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-
-echo "systemctl enable systemd-networkd"

type/__systemd_network/man.rst

@@ -1,68 +0,0 @@
-cdist-type__systemd-network(7)
-==============================
-
-NAME
-----
-cdist-type__systemd-network - Configure systemd.network(5) file.
-
-
-DESCRIPTION
------------
-
-This type allows you to configure network interfaces by generating a
-systemd.network(5) file. It will enable systemd-networkd, so be sure to remove
-any conflicting network configuration tool if appropriate!
-
-Note that the systemd.network(5) system is very complete, and this type does
-not aim at providing every possible option. Are currently available only the
-most common options: feel free to add anything you need to this type which
-hopefully will grow over time.
-
-
-REQUIRED PARAMETERS
--------------------
-None.
-
-
-OPTIONAL PARAMETERS
--------------------
-description
-  A text field used when displaying details about this network.
-
-OPTIONAL MULTIPLE PARAMETERS
-----------------------------
-match-name
-  A text field that will be set in the `Name` option of the `[Match]` section.
-
-
-BOOLEAN PARAMETERS
-------------------
-ipv6ra-usedomains
-  Set the `UseDomains` option of the `[IPv6AcceptRA]` section to `True`.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # TODO
-    __systemd-network
-
-
-SEE ALSO
---------
-`cdist-type_systemd-resolved`\ (7)
-`systemd.network`\ (5)
-
-AUTHORS
--------
-Joachim Desroches <joachim.desroches@epfl.ch>
-
-
-COPYING
--------
-Copyright \(C) 2022 Joachim Desroches. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

type/__systemd_network/manifest

@@ -1,86 +0,0 @@
-#!/bin/sh -e
-#
-# 2022 Joachim Desroches (joachim.desroches@epfl.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-os=$(cat "${__global:?}/explorer/os")
-
-case "$os" in
-'debian' | 'ubuntu' | 'archlinux')
-	:
-	;;
-*)
-	printf "Your operating system (%s) is currently not supported by systemd-network\n" "$os" >&2
-	printf "Please contribute an implementation for it if you can.\n" >&2
-	exit 1
-	;;
-esac
-
-# XXX: Please keep the option parsing organized in order per-section, with
-# sections in the same order as they are in the manpage. This will make hacking
-# and maintaining this type much easier.
-
-mkdir "${__object:?}/files"
-output_file="${__object:?}/files/${__object_id:?}.network"
-
-cat << EOF > "$output_file"
-# This file is managed by cdist. Do not edit by hand!
-EOF
-
-# Match section
-# Ensure section is needed, OR existence of optional params.
-if [ -f "${__object:?}/parameter/match-name" ];
-then
-	printf "\n[Match]\n" >> "$output_file"
-
-	if [ -f "${__object:?}/parameter/match-name" ];
-	then
-		sed -e 's/^/Name=/' \
-			"${__object:?}/parameter/match-name" >> "$output_file"
-	fi
-fi
-
-# Network section
-# Ensure section is needed, OR existence of optional params.
-if [ -f "${__object:?}/parameter/description" ];
-then
-	printf "\n[Network]\n" >> "$output_file"
-
-	if [ -f "${__object:?}/parameter/description" ];
-	then
-		sed -e 's/^/Description=/' \
-			"${__object:?}/parameter/description" >> "$output_file"
-	fi
-fi
-
-# IPv6AcceptRA section
-# Ensure section is needed, OR existence of optional params.
-if [ -f "${__object:?}/parameter/ipv6ra-usedomains" ];
-then
-	printf "\n[IPv6AcceptRA]\n" >> "$output_file"
-
-	if [ -f "${__object:?}/parameter/ipv6ra-usedomains" ];
-	then
-		printf "UseDomains=True\n" >> "$output_file"
-	fi
-	
-fi
-
-__file "/etc/systemd/network/${__object_id:?}.network" \
-	--source "$output_file" \
-	--mode 0644

type/__systemd_network/parameter/boolean

@@ -1 +0,0 @@
-ipv6ra-usedomains

type/__systemd_network/parameter/optional

@@ -1 +0,0 @@
-description

type/__systemd_network/parameter/optional_multiple

@@ -1 +0,0 @@
-match-name

type/__systemd_resolved/gencode-remote

@@ -1,21 +0,0 @@
-#!/bin/sh -e
-#
-# 2022 Joachim Desroches (joachim.desroches@epfl.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-echo "systemctl enable systemd-resolved"

type/__systemd_resolved/man.rst

@@ -1,47 +0,0 @@
-cdist-type__systemd_resolved(7)
-===============================
-
-NAME
-----
-cdist-type__systemd_resolved - Configure system to use systemd-resolved.
-
-
-DESCRIPTION
------------
-*systemd-resolved* is a systemd service that provides network name resolution
-to local applications via a D-Bus interface, the resolve NSS service
-(nss-resolve(8)), and a local DNS stub listener on 127.0.0.53.
-
-This type enables and starts this type, and helps with some minimal
-configuration. In particular, systemd-resolved has four modes of handling the
-`/etc/resolv.conf` file: stub, static, uplink and foreign. See the
-systemd-resolved(8) manpage for details. By default, this type uses stub mode:
-if you need another one, please provide an implementation in this type!
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    __systemd_resolved
-
-
-SEE ALSO
---------
-`systemd.network`\ (5)
-`systemd-resolved`\ (8)
-`nss-resolve`\ (8)
-
-
-AUTHORS
--------
-Joachim Desroches <joachim.desroches@epfl.ch>
-
-
-COPYING
--------
-Copyright \(C) 2022 Joachim Desroches. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

type/__systemd_resolved/manifest

@@ -1,42 +0,0 @@
-#!/bin/sh -e
-#
-# 2022 Joachim Desroches (joachim.desroches@epfl.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-os=$(cat "${__global:?}/explorer/os")
-
-case "$os" in
-'debian')
-	:
-	;;
-*)
-	printf "Your operating system (%s) is currently not supported by __systemd_resolved\n" "$os" >&2
-	printf "Please contribute an implementation for it if you can.\n" >&2
-	exit 1
-	;;
-esac
-
-__link /etc/resolv.conf \
-	--type symbolic \
-	--source ../run/systemd/resolve/stub-resolv.conf
-
-require=__link/etc/resolv.conf \
-	__systemd_service systemd-resolved \
-		--state running \
-		--action restart \
-		--if-required

type/__uacme_obtain/man.rst

@@ -38,8 +38,7 @@ install-key-to
   Installation path of the certificate's private key.
 
 renew-hook
-  Renew hook executed on certificate renewal (e.g. `service nginx reload`, `-`
-  for the standard input).
+  Renew hook executed on certificate renewal (e.g. `service nginx reload`).
 
 force-cert-ownership-to
   Override default ownership for TLS certificate, passed as argument to chown.

type/__uacme_obtain/manifest

@@ -109,12 +109,8 @@ export CERT_TARGET
 RENEW_HOOK=
 if [ -f "${__object:?}/parameter/renew-hook" ];
 then
-	if [ "$(cat "${__object:?}/parameter/renew-hook")" = "-" ]; then
-		RENEW_HOOK="$(cat ${__object:?}/stdin)"
-	else
 	RENEW_HOOK="$(cat "${__object:?}/parameter/renew-hook")"
 fi
-fi
 export RENEW_HOOK
 
 if [ -n "$KEY_TARGET" ] && [ -z "$CERT_TARGET" ]; then