[__bird_radv] add --default-lifetime parameter

type/__bird_radv/man.rst

@@ -26,6 +26,18 @@ OPTIONAL PARAMETERS
 mtu
   An optional MTU setting to include in the router advertisements.
 
+default-preference
+  This option specifies the Default Router Preference value to advertise to
+  hosts. Default: medium.
+
+route-preference
+  This option specifies the default value of advertised route preference for
+  specific routes. Default: medium.
+
+default-lifetime
+  This option specifies the time (in seconds) how long (since the receipt of RA)
+  hosts may use the router as a default router. 0 means do not use as a default
+  router. Default: 3.
 
 OPTIONAL MULTIPLE PARAMETERS
 ----------------------------

type/__bird_radv/manifest

@@ -58,27 +58,48 @@ fi
 MTU=
 if [ -f "${__object:?}/parameter/mtu" ];
 then
-	MTU="link mtu $(cat "${__object:?}/parameter/mtu")"
+	MTU="link mtu $(cat "${__object:?}/parameter/mtu");"
+fi
+
+DEFAULT_PREFERENCE=
+if [ -f "${__object:?}/parameter/default-preference" ];
+then
+	DEFAULT_PREFERENCE="default preference $(cat "${__object:?}/parameter/default-preference");"
+fi
+
+ROUTE_PREFERENCE=
+if [ -f "${__object:?}/parameter/route-preference" ];
+then
+	ROUTE_PREFERENCE="route preference $(cat "${__object:?}/parameter/route-preference");"
+fi
+
+DEFAULT_LIFETIME=
+if [ -f "${__object:?}/parameter/default-lifetime" ];
+then
+	DEFAULT_LIFETIME="default lifetime $(cat "${__object:?}/parameter/default-lifetime");"
 fi
 
 __file "${confdir:?}/radv-${__object_id:?}.conf" \
 	--mode 0640 --owner root --group bird \
 	--source - << EOF
-ipv6 table radv_routes;
+ipv6 table radv_routes_${__object_id};
 
 protocol static {
 	description "Routes advertised via RAs";
-	ipv6 { table radv_routes; };
+	ipv6 { table radv_routes_${__object_id}; };
 
 $(sed -e 's/^/\troute /' -e 's/$/ unreachable;/' "${__object:?}/parameter/route")
 }
 
 protocol radv ${__object_id:?} {
 	propagate routes ${have_routes:?};
-	ipv6 { table radv_routes; export all; };
+	ipv6 { table radv_routes_${__object_id}; export all; };
 
 	interface "$(cat "${__object:?}/parameter/interface")" {
 	$MTU
+	$DEFAULT_LIFETIME
+	$DEFAULT_PREFERENCE
+	$ROUTE_PREFERENCE
 	};
 
 $RDNS

type/__bird_radv/parameter/optional

@@ -1 +1,4 @@
 mtu
+default-preference
+route-preference
+default-lifetime

type/__opendkim_genkey/explorer/key-state

@@ -1,32 +0,0 @@
-#!/bin/sh -e
-DIRECTORY="/var/db/dkim/"
-if [ -f "${__object:?}/parameter/directory" ];
-then
-	# Be forgiving about a lack of trailing slash
-	DIRECTORY="$(sed -E 's!([^/])$!\1/!' < "${__object:?}/parameter/directory")"
-fi
-
-
-KEY_ID="$(echo "${__object_id:?)}" | tr '/' '_')"
-DEFAULT_PATH="${DIRECTORY:?}${KEY_ID:?}.private"
-if [ -s "${DEFAULT_PATH}" ]; then
-	# This is the main location for the key
-	FOUND_PATH="${DEFAULT_PATH}"
-else
-	# This is a backwards-compatible location for the key
-	# Keys generated post March 2022 should not land here
-	if [ -f "${__object:?}/parameter/selector" ]; then
-		SELECTOR="$(cat "${__object:?}/parameter/selector")"
-		if [ -s "${DIRECTORY}${SELECTOR:?}.private" ]; then
-			FOUND_PATH="${DIRECTORY}${SELECTOR:?}.private"
-		fi
-	fi
-fi
-
-if [ -n "${FOUND_PATH}" ]; then
-	printf "present\t%s" "${FOUND_PATH}"
-else
-	# We didn't find the key
-	# We pass the default path here, to easen logic in the rest of the type
-	printf "absent\t%s" "${DEFAULT_PATH}"
-fi

type/__opendkim_genkey/gencode-remote

@@ -19,8 +19,8 @@
 #
 
 # Required parameters
-DOMAIN="$(cat "${__object:?}/domain")"
+DOMAIN="$(cat "${__object:?}/parameter/domain")"
-SELECTOR="$(cat "${__object:?}/selector")"
+SELECTOR="$(cat "${__object:?}/parameter/selector")"
 
 # Optional parameters
 BITS=
@@ -28,6 +28,12 @@ if [ -f "${__object:?}/parameter/bits" ]; then
 	BITS="-b $(cat "${__object:?}/parameter/bits")"
 fi
 
+DIRECTORY="/var/db/dkim/"
+if [ -f "${__object:?}/parameter/directory" ]; then
+	# Be forgiving about a lack of trailing slash
+	DIRECTORY="$(sed -E 's!([^/])$!\1/!' < "${__object:?}/parameter/directory")"
+fi
+
 # Boolean parameters
 SUBDOMAINS=
 if [ -f "${__object:?}/parameter/no-subdomains" ]; then
@@ -42,24 +48,9 @@ fi
 user="$(cat "${__object:?}/user")"
 group="$(cat "${__object:?}/group")"
 
-KEY_STATE="$(cut -f 1 "${__object:?}/explorer/key-state")"
+if ! [ -f "${DIRECTORY}${SELECTOR}.private" ]; then
-KEY_LOCATION="$(cut -f 2- "${__object:?}/explorer/key-state")"
+	echo "opendkim-genkey $BITS --domain=$DOMAIN --directory=$DIRECTORY $RESTRICTED --selector=$SELECTOR $SUBDOMAINS"
-
+	echo "chown ${user}:${group} ${DIRECTORY}${SELECTOR}.private"
-if [ "${KEY_STATE:?}" = "absent" ]; then
-	# opendkim-genkey(8) does not allow specifying the file name.
-	# To err on the safe side (and avoid potentially killing other keys)
-	# we operate on a temporary directory first, then move the resulting key
-	cat <<-EOF
-	tmp_dir="\$(mktemp -d cdist-dkim.XXXXXXXXXXX)"
-	opendkim-genkey $BITS --domain=${DOMAIN:?} --directory=\${tmp_dir:?} $RESTRICTED --selector=${SELECTOR:?} $SUBDOMAINS
-	# Relocate and ensure permissions
-	mv "\${tmp_dir:?}/${SELECTOR:?}.private" '${KEY_LOCATION:?}'
-	chown ${user}:${group} '${KEY_LOCATION}'
-	chmod 0600 '${KEY_LOCATION}'
 	# This is usually generated, if it weren't we do not want to fail
-	mv "\${tmp_dir:?}/${SELECTOR:?}.txt" '${KEY_LOCATION%.private}.txt' || true
+	echo "chown ${user}:${group} ${DIRECTORY}${SELECTOR}.txt || true"
-	chown ${user}:${group} '${KEY_LOCATION%.private}.txt' || true
-	# Cleanup after ourselves
-	rmdir "\${tmp_dir:?}" || true
-	EOF
 fi

type/__opendkim_genkey/man.rst

@@ -10,27 +10,23 @@ DESCRIPTION
 -----------
 
 This type uses the `opendkim-genkey(8)` to generate signing keys suitable for
-usage by `opendkim(8)` to sign outgoing emails.
+usage by `opendkim(8)` to sign outgoing emails. Then, a line with the domain,
-
+selector and keyname in the `$selector._domainkey.$domain` format will be added
-It also manages the key, identified by its `$__object_id` in OpenDKIM's
+to the OpenDKIM key table located at `/etc/opendkim/KeyTable`. Finally, a line
-KeyTable and sets its `s=` and `d=` parameters (see: `--selector` and
+will be added to the OpenDKIM signing table, using either the domain or the
-`--sigdomain` respectively).
+provided key for the `domain:selector:keyfile` value in the table. An existing
-
+key will not be overwritten.
-This type will also manage the entries in the OpenDKIM's SigningTable by
-associating any given `sigkey` values to this key.
-
-Take into account that if you use this type without the `--domain` and
-`--selector` parameters, the `$__object_id` must be in form `$domain/$selector`.
 
 Currently, this type is only implemented for Alpine Linux and FreeBSD.
 Please contribute an implementation if you can.
 
-NOTE: the name of the key file under `--directory` will default to
+REQUIRED PARAMETERS
-`$__object_id.private`, but if that fails and `--selector` is used,
+-------------------
-`SELECTOR.private` will be considered.
+domain
-Take care when using unrelated keys that might collide this way.
+  The domain to generate the key for.
-For more information see:
+
-https://code.ungleich.ch/ungleich-public/cdist-contrib/issues/20
+selector
+  The DKIM selector to generate the key for.
 
 
 OPTIONAL PARAMETERS
@@ -42,36 +38,10 @@ bits
 directory
   The directory in which to generate the key, `/var/db/dkim/` by default.
 
-domain
-  The domain to generate the key for.
-  If omitted, `--selector` must be omitted as well and `$__object_id` must be
-  in form: `$domain/$selector`.
-
-selector
-  The DKIM selector to generate the key for.
-  If omitted, `--domain` must be omitted as well and `$__object_id` must be
-  in form: `$domain/$selector`.
-
-sigdomain
-  Specified in the KeyTable, the domain to use in the signature's "d=" value.
-  Defaults to the specified domain. If `%`, it will be replaced by the apparent
-  domain of the sender when generating a signature.
-  Note you probably don't want to set both `--sigdomain` and `--sigkey` to `%`.
-  See `KeyTable` in `opendkim.conf(5)` for more information.
-
-
-OPTIONAL MULTIPLE PARAMETERS
-----------------------------
 sigkey
-  The key used in the `SigningTable` for this signing key. Defaults to the
+  The key used in the SigningTable for this signing key. Defaults to the
   specified domain. If `%`, OpenDKIM will replace it with the domain found
   in the `From:` header. See `opendkim.conf(5)` for more options.
-  Note you probably don't want to set both `--sigdomain` and `--sigkey` to `%`.
-  This can be passed multiple times, resulting in multiple lines in the
-  SigningTable, which can be used to support signing of subdomains or multiple
-  domains with the same key; in that case, you probably want to set
-  `--sigdomain` to `%`, else the domains will not be aligned.
-
 
 BOOLEAN PARAMETERS
 ------------------
@@ -87,7 +57,6 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Setup the OpenDKIM service
     __opendkim \
         --socket inet:8891@localhost \
         --basedir /var/lib/opendkim \
@@ -96,24 +65,14 @@ EXAMPLES
         --umask 002 \
         --syslog
 
-    # Continue only after the service has been set up
+    require='__opendkim' \
-    export require="__opendkim"
+        __opendkim_genkey default \
+                --domain example.com \
+                --selector default
 
-    # Generate a key for 'example.com' with selector 'default'
+        __opendkim_genkey myfoo \
-    __opendkim_genkey default \
+                --domain foo.com \
-        --domain example.com \
+                --selector backup
-        --selector default
-
-    # Generate a key for 'foo.com' with selector 'backup'
-    __opendkim_genkey 'foo.com/backup'
-
-    # Generate a key for 'example.org' with selector 'main'
-    # that can also sign 'cdi.st' and subdomains of 'example.org'
-    __opendkim_genkey 'example.org/main' \
-        --sigdomain '%' \
-        --sigkey 'example.org' \
-        --sigkey '.example.org' \
-        --sigkey 'cdi.st'
 
 
 SEE ALSO

type/__opendkim_genkey/manifest

@@ -35,48 +35,17 @@ case "$os" in
 ;;
 *)
 	cat <<- EOF >&2
-	__opendkim_genkey currently only supports Alpine Linux and FreeBSD.
+	__opendkim_genkey currently only supports Alpine Linux. Please
-	Please contribute an implementation for $os if you can.
+	contribute an implementation for $os if you can.
 	EOF
-	exit 1
 ;;
 esac
+# Persist user and group for gencode-remote
+printf '%s' "${user}" > "${__object:?}/user"
+printf '%s' "${group}" > "${__object:?}/group"
 
-# Logic to simplify the type as documented in
+SELECTOR="$(cat "${__object:?}/parameter/selector")"
-# https://code.ungleich.ch/ungleich-public/cdist-contrib/issues/20#issuecomment-14711
+DOMAIN="$(cat "${__object:?}/parameter/domain")"
-DOMAIN="$(cat "${__object:?}/parameter/domain" 2>/dev/null || true)"
-SELECTOR="$(cat "${__object:?}/parameter/selector" 2>/dev/null || true)"
-if [ -z "${DOMAIN}${SELECTOR}" ]; then
-	# Neither SELECTOR nor DOMAIN were passed, try to use __object_id
-	if echo "${__object_id:?}" | \
-			grep -qE '^[^/[:space:]]+/[^/[:space:]]+$'; then
-		# __object_id matches, let's get the data
-		DOMAIN="$(echo "${__object_id:?}" | cut -d '/' -f 1)"
-		SELECTOR="$(echo "${__object_id:?}" | cut -d '/' -f 2)"
-	else
-		# It doesn't match the pattern, this is sad
-		cat <<- EOF >&2
-		The arguments --domain and --selector were not used.
-		So __object_id must match DOMAIN/SELECTOR.
-		But instead the type got: ${__object_id:?}
-		EOF
-		exit 1
-	fi
-elif [ -z "${DOMAIN}" ] || [ -z "${SELECTOR}" ]; then
-	# Only one was passed, this is sad :-(
-	cat <<- EOF >&2
-	You must pass either both --selector and --domain or none of them.
-	If these arguments are absent, __object_id must match: DOMAIN/SELECTOR.
-	EOF
-	exit 1
-# else: both were passed
-fi
-
-# Persist data for gencode-remote
-printf '%s' "${user:?}" > "${__object:?}/user"
-printf '%s' "${group:?}" > "${__object:?}/group"
-printf '%s' "${DOMAIN:?}" > "${__object:?}/domain"
-printf '%s' "${SELECTOR:?}" > "${__object:?}/selector"
 
 DIRECTORY="/var/db/dkim/"
 if [ -f "${__object:?}/parameter/directory" ];
@@ -90,11 +59,6 @@ if [ -f "${__object:?}/parameter/sigkey" ];
 then
 	SIGKEY="$(cat "${__object:?}/parameter/sigkey")"
 fi
-SIGDOMAIN="${DOMAIN:?}"
-if [ -f "${__object:?}/parameter/sigdomain" ];
-then
-	SIGDOMAIN="$(cat "${__object:?}/parameter/sigdomain")"
-fi
 
 # Ensure the key-container directory exists with the proper permissions
 __directory "${DIRECTORY}" \
@@ -112,28 +76,10 @@ esac
 key_table="${CFG_DIR}/KeyTable"
 signing_table="${CFG_DIR}/SigningTable"
 
-KEY_STATE="$(cut -f 1 "${__object:?}/explorer/key-state")"
+__line "line-key-${__object_id:?}" \
-KEY_LOCATION="$(cut -f 2- "${__object:?}/explorer/key-state")"
-
-__line "__opendkim_genkey/${__object_id:?}" \
 	--file "${key_table}" \
-	--line "${__object_id:?} ${SIGDOMAIN:?}:${SELECTOR:?}:${KEY_LOCATION:?}" \
+	--line "${SELECTOR:?}._domainkey.${DOMAIN:?} ${DOMAIN:?}:${SELECTOR:?}:${DIRECTORY:?}${SELECTOR:?}.private"
-	--regex "^${__object_id:?}[[:space:]]" \
-	--state 'replace'
 
-sigtable_block() {
+__line "line-sig-${__object_id:?}" \
-	for sigkey in ${SIGKEY:?}; do
-		echo "${sigkey:?} ${__object_id:?}"
-	done
-}
-__block "__opendkim_genkey/${__object_id:?}" \
 	--file "${signing_table}" \
-	--text "$(sigtable_block)"
+	--line "${SIGKEY:?} ${SELECTOR:?}._domainkey.${DOMAIN:?}"
-
-if [ "${KEY_STATE:?}" = "present" ]; then
-	# Ensure proper permissions for the key file
-	__file "${KEY_LOCATION}" \
-		--owner "${user}" \
-		--group "${group}" \
-		--mode 0600
-fi

type/__opendkim_genkey/parameter/optional

@@ -1,6 +1,4 @@
 bits
 directory
-domain
 unrestricted
-selector
+sigkey
-sigdomain

type/__opendkim_genkey/parameter/optional_multiple

@@ -1 +0,0 @@
-sigkey

type/__opendkim_genkey/parameter/required

@@ -0,0 +1,2 @@
+domain
+selector