ccollect/doc/ccollect.text

ccollect - Installing, Configuring and Using
============================================
Nico Schottelius <nico-ccollect__@__schottelius.org>
0.9, for ccollect 0.9, Initial Version from 2006-01-13
:Author Initials: NS


(pseudo) incremental backup
with different exclude lists
using hardlinks and `rsync`


Introduction
------------
`ccollect` is a backup utility written in the sh-scripting language.
It does not depend on a specific shell, only `/bin/sh` needs to be
bourne shell compatible (like 'dash', 'ksh', 'zsh', 'bash', ...).


Supported and tested operating systems and architectures
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
`ccollect` was successfully tested on the following platforms:

- FreeBSD   on amd64/i386
- GNU/Linux on amd64/arm/hppa/i386/ppc
- Mac OS X  10.5
- NetBSD    on alpha/amd64/i386/sparc/sparc64
- OpenBSD   on amd64

It *should* run on any Unix that supports `rsync` and has a POSIX-compatible
bourne shell. If your platform is not listed above and you have it successfully
running, please drop me a mail.


Why you COULD only backup from remote hosts, not to them
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While considering the design of ccollect, I thought about enabling
backup to *remote* hosts. Though this sounds like a nice feature
('"Backup my notebook to the server now."'), in my opinion it is a
bad idea to backup to a remote host.

But as more and more people requested this feature, it was implemented,
so you have the choice whether you want to use it or not.


Reason
^^^^^^
If you want to backup *TO* a remote host, you have to loosen security on it.

Imagine the following situation: You backup your farm of webservers *TO*
a backup host somewhere else.
Now one of your webservers which has access to your backup host gets
compromised.

Your backup server will be compromised, too.

And the attacker will have access to all data on the other webservers.


Doing it securely
^^^^^^^^^^^^^^^^^
Think of it the other way round: The backup server (now behind a
firewall, not accessable from outside) connects to the
webservers and pulls the data *from* them. If someone gets access to one
of the webservers, this person will perhaps not even see your machine. If
the attacker sees connections from a host to the compromised
machine, she will not be able to log in on the backup machine.
All other backups are still secure.


Incompatibilities and changes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Versions 0.9 and 1.0
^^^^^^^^^^^^^^^^^^^^
- Added "Error: " prefix in _exit_err()

Versions 0.8 and 0.9
^^^^^^^^^^^^^^^^^^^^
- Renamed script to ccollect (.sh is not needed) 
- Removed feature to backup to a host via ccollect, added new tool
  (FIXME: insert name here) that takes care of this via tunnel
- Perhaps creating subdirectory of source name (idea from Stefan Schlörholz)

Versions 0.7 and 0.8
^^^^^^^^^^^^^^^^^^^^

.The argument order changed:
- Old: "<interval name> [args] <sources to backup>"
- New: "[args] <interval name> <sources to backup>"

If you did not use arguments (most people do not), nothing will
change for you.

.Deletion of incomplete backups using the 'delete_incomplete' option
- Old: Only incomplete backups from the current interval have been removed
- New: All incomplete backups are deleted

.Support for standard values
- Old: no support
- New: Options in $CCOLLECT_CONF/defaults are used as defaults (see below)

Versions 0.6 and 0.7
^^^^^^^^^^^^^^^^^^^^
.The format of `destination` changed:
- Before 0.7 it was a (link to a) directory
- As of 0.7 it is a textfile containing the destination

You can update your configuration using `tools/config-pre-0.7-to-0.7.sh`.

.Added 'remote_host'
- As of 0.7 it is possible to backup *to* hosts (see section remote_host below).


Versions 0.5 and 0.6
^^^^^^^^^^^^^^^^^^^^
.The format of `rsync_options` changed:
- Before 0.6 it was whitespace delimeted
- As of 0.6 it is newline seperated (so you can pass whitespaces to `rsync`)

You can update your configuration using `tools/config-pre-0.6-to-0.6.sh`.

.The name of the backup directories changed:
- Before 0.6: "date +%Y-%m-%d-%H%M"
- As of 0.6:  "date +%Y%m%d-%H%M" (better readable, date is closer together)

For the second change there is no updated needed, as XXXX- is always before
XXXXX (- comes before digit).



Versions 0.4 and 0.5
^^^^^^^^^^^^^^^^^^^^
Not a real incompatibilty, but seems to fit in this section:

.0.5 does *NOT* require
- PaX
- bc

anymore!


Versions < 0.4 and 0.4
^^^^^^^^^^^^^^^^^^^^^^

Since `ccollect` 0.4 there are several incompatibilities with earlier
versions:

.List of incompatibilities 
- `pax` (Posix) is now required, `cp -al` (GNU specific) is removed
- "interval" was written with two 'l' (ell), which is wrong in English
- Changed the name of backup directories, removed the colon in the interval
- ccollect will now exit when preexec returns non-zero
- ccollect now reports when postexec returns non-zero

You can convert your old configuration directory using
`config-pre-0.4-to-0.4.sh`, which can be found in the *tools/*
subdirectory:

--------------------------------------------------------------------------------
[10:05] hydrogenium:ccollect-0.4# ./tools/config-pre-0.4-to-0.4.sh /etc/ccollect
--------------------------------------------------------------------------------


Quick start
-----------
For those who do not want to read the whole long document:

--------------------------------------------------------------------------------
# get latest ccollect tarball from http://www.nico.schottelius.org/software/ccollect/
# replace value for CCV with the current version
export CCV=0.8.1

#
# replace 'wget' with 'fetch' on bsd
#
holen=wget
"$holen" http://www.nico.schottelius.org/software/ccollect/ccollect-${CCV}.tar.bz2

# extract the tarball, change to the newly created directory
tar -xvjf ccollect-${CCV}.tar.bz2
cd ccollect-${CCV}

# create mini-configuration
# first create directory structure
mkdir -p miniconfig/defaults/intervals
mkdir    miniconfig/sources

# create sample intervals
echo 2 > miniconfig/defaults/intervals/testinterval
echo 3 > miniconfig/defaults/intervals/testinterval2

# create destination directory, where the backups will be kept
mkdir ~/DASI

# create sample source, which will be saved
mkdir miniconfig/sources/testsource

# We will save '/bin' to the directory '~/DASI'
echo '/bin' > miniconfig/sources/testsource/source

# configure ccollect to use ~/DASI as destination
echo ~/DASI > miniconfig/sources/testsource/destination

# We want to see what happens and also a small summary at the end
touch miniconfig/sources/testsource/verbose
touch miniconfig/sources/testsource/summary

echo "do the backup, twice"
CCOLLECT_CONF=./miniconfig ./ccollect.sh testinterval testsource
CCOLLECT_CONF=./miniconfig ./ccollect.sh testinterval testsource

echo "the third time ccollect begins to remove old backups"
echo -n "Hit enter to see it"
read
CCOLLECT_CONF=./miniconfig ./ccollect.sh testinterval testsource

echo "Now we add another interval, ccollect should clone from existent ones"
echo -n "Hit enter to see it"
read
CCOLLECT_CONF=./miniconfig ./ccollect.sh testinterval2 testsource

echo "Let's see how much space we used with two backups and compare it to /bin"
du -s ~/DASI /bin

# report success
echo "Please report success using ./tools/report_success.sh"

--------------------------------------------------------------------------------

Cutting and pasting the complete section above to your shell will result in
the download of ccollect, the creation of a sample configuration and the
execution of some backups.


Requirements
------------

Installing ccollect
~~~~~~~~~~~~~~~~~~~
For the installation you need at least

  - the latest ccollect package (http://www.nico.schottelius.org/software/ccollect/)
  - either `cp` and `chmod` or `install`
  - for more comfort: `make`
  - for rebuilding the generated documentation: additionally `asciidoc`


Using ccollect
~~~~~~~~~~~~~~
.Running ccollect requires the following tools to be installed:
   - `date`
   - `rsync`
   - `ssh` (if you want to use rsync over ssh, which is recommened for security)


Installing
----------
Either type 'make install' or simply copy it to a directory in your
$PATH and execute 'chmod *0755* /path/to/ccollect.sh'. If you like
to use the new management scripts (available since 0.6), copy the
following scripts to a directory in $PATH:

- `tools/ccollect_add_source.sh`
- `tools/ccollect_analyse_logs.sh.sh`
- `tools/ccollect_delete_source.sh`
- `tools/ccollect_list_intervals.sh`
- `tools/ccollect_logwrapper.sh`

After having installed and used ccollect, report success using
'./tools/report_success.sh'.


Configuring
-----------
For configuration aid have a look at the above mentioned tools, which can assist
you quite well. When you are successfully using `ccollect`, I would be happy if
you add a link to your website, stating "I backup with ccollect", which points
to the ccollect homepage. So more people now about ccollect, use it and
improve it. You can also report success using `tools/report_success.sh`.


Runtime options
~~~~~~~~~~~~~~~
`ccollect` looks for its configuration in '/etc/ccollect' or, if set, in
the directory specified by the variable '$CCOLLECT_CONF':
--------------------------------------------------------------------------------
# sh-compatible (dash, zsh, mksh, ksh, bash, ...)
$ CCOLLECT_CONF=/your/config/dir ccollect.sh ...

# csh
$ ( setenv CCOLLECT_CONF /your/config/dir ; ccollect.sh ... )
--------------------------------------------------------------------------------

When you start `ccollect`, you have to specify in which interval
to backup (daily, weekly, yearly; you can specify the names yourself, see below)
and which sources to backup (or -a to backup all sources).

The interval specifies how many backups are kept.

There are also some self-explanatory parameters you can pass to ccollect,
simply use `ccollect.sh --help` for info.


General configuration
~~~~~~~~~~~~~~~~~~~~~
The general configuration can be found in $CCOLLECT_CONF/defaults or
/etc/ccollect/defaults. All options specified there are generally valid for
all source definitions, although the values can be overwritten in the source
configuration.

All configuration entries are plain-text files
(use UTF-8 for non-ascii characters).


Interval definition
^^^^^^^^^^^^^^^^^^^^
The interval definition can be found in
'$CCOLLECT_CONF/defaults/intervals/' or '/etc/ccollect/defaults/intervals'. 
Each file in this directory specifies an interval. The name of the file is
the same as the name of the interval: `intervals/'<interval name>'`.

The content of this file should be a single line containing a number.
This number defines how many versions of this interval are kept.

Example:
-------------------------------------------------------------------------
   [10:23] zaphodbeeblebrox:ccollect-0.2% ls -l conf/defaults/intervals/
   insgesamt 12
   -rw-r--r--  1 nico users 3 2005-12-08 10:24 daily
   -rw-r--r--  1 nico users 3 2005-12-08 11:36 monthly
   -rw-r--r--  1 nico users 2 2005-12-08 11:36 weekly
   [10:23] zaphodbeeblebrox:ccollect-0.2% cat conf/defaults/intervals/*
   28
   12
   4
--------------------------------------------------------------------------------
This means to keep 28 daily backups, 12 monthly backups and 4 weekly.


General pre- and post-execution
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you add '$CCOLLECT_CONF/defaults/`pre_exec`' or
'/etc/ccollect/defaults/`pre_exec`' (same with `post_exec`), `ccollect`
will start `pre_exec` before the whole backup process and
`post_exec` after backup of all sources is done.

If `pre_exec` exits with a non-zero return code, the whole backup
process will be aborted.

The `pre_exec` and `post_exec` script can access the following exported variables:

- 'INTERVAL': the interval selected (`daily`)
- 'no_sources': number of sources to backup (`2`)
- 'source_$no': name of the source, '$no' starts at 0 (`$source_0`)

The following example describes how to report free disk space in
human readable format before and after the whole backup process:
-------------------------------------------------------------------------
[13:00] hydrogenium:~# mkdir -p /etc/ccollect/defaults/
[13:00] hydrogenium:~# echo '#!/bin/sh' >  /etc/ccollect/defaults/pre_exec
[13:01] hydrogenium:~# echo ''          >> /etc/ccollect/defaults/pre_exec 
[13:01] hydrogenium:~# echo 'df -h'     >> /etc/ccollect/defaults/pre_exec
[13:01] hydrogenium:~# chmod 0755 /etc/ccollect/defaults/pre_exec
[13:01] hydrogenium:~# ln -s /etc/ccollect/defaults/pre_exec /etc/ccollect/defaults/post_exec
-------------------------------------------------------------------------


Source configuration
~~~~~~~~~~~~~~~~~~~~
Each source configuration exists in '$CCOLLECT_CONF/sources/$name' or
'/etc/ccollect/sources/$name'.

The name you choose for the subdirectory describes the source.

Each source contains at least the following files:

   - `source`       (a text file containing the `rsync` compatible path to backup)
   - `destination`  (a text file containing the directory we should backup to)

Additionally a source may have the following files:

   - `pre_exec`            program to execute before backing up *this* source
   - `post_exec`           program to execute after backing up *this* source
   
   - `verbose`             whether to be verbose (passes -v to `rsync`)
   - `very_verbose`        be very verbose (`mkdir -v`, `rm -v` and `rsync -vv`)
   - `summary`             create a transfer summary when `rsync` finished

   - `exclude`             exclude list  for `rsync`. newline seperated list.
   - `rsync_options`       extra options for `rsync`. newline seperated list.

   - `delete_incomplete`   delete incomplete backups
   - `remote_host`         host to backup to
   - `rsync_failure_codes` list of rsync exit codes that indicate complete failure
   - `mtime`               Sort backup directories based on their modification time
   - `quiet_if_down`       Suppress error messages if source is not connectable


Example:
--------------------------------------------------------------------------------
   [10:47] zaphodbeeblebrox:ccollect-0.2% ls -l  conf/sources/testsource2
   insgesamt 12
   lrwxrwxrwx  1 nico users   20 2005-11-17 16:44 destination
   -rw-r--r--  1 nico users   62 2005-12-07 17:43 exclude
   drwxr-xr-x  2 nico users 4096 2005-12-07 17:38 intervals
   -rw-r--r--  1 nico users   15 2005-11-17 16:44 source
   [10:47] zaphodbeeblebrox:ccollect-0.2% cat conf/sources/testsource2/exclude 
   openvpn-2.0.1.tar.gz
   nicht_reinnehmen
   etwas mit leerzeichenli
   [10:47] zaphodbeeblebrox:ccollect-0.2% ls -l  conf/sources/testsource2/intervals
   insgesamt 4
   -rw-r--r--  1 nico users 2 2005-12-07 17:38 daily
   [10:48] zaphodbeeblebrox:ccollect-0.2% cat conf/sources/testsource2/intervals/daily 
   5
   [10:48] zaphodbeeblebrox:ccollect-0.2% cat conf/sources/testsource2/source 
   /home/nico/vpn
--------------------------------------------------------------------------------

Default options
^^^^^^^^^^^^^^^
If you add '$CCOLLECT_CONF/defaults/`option_name`', the value will
be used in abscence of the option in a source. If you want to prevent
the default value to be used in a source, you can create the file
'$CCOLLECT_CONF/sources/$name/`no_option_name`' (i.e. prefix it with
'no_'.

Example:
--------------------------------------------------------------------------------
   [9:04] ikn2:ccollect% touch conf/defaults/verbose
   [9:04] ikn2:ccollect% touch conf/sources/local/no_verbose
--------------------------------------------------------------------------------
This enables the verbose option for all sources, but disables it for the
source 'local'.

If an option is specified in the defaults folder and in the source,
the source specific version overrides the default one:

Example:
--------------------------------------------------------------------------------
   [9:05] ikn2:ccollect% echo "backup-host" > conf/defaults/remote_host
   [9:05] ikn2:ccollect% echo "different-host" > conf/sources/local/remote_host
--------------------------------------------------------------------------------

You can use all source options as defaults, with the exception of

- `source`
- `destination`
- `pre_exec`
- `post_exec`

Detailed description of "source"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
`source` describes a `rsync` compatible source (one line only).
 
For instance 'backup_user@foreign_host:/home/server/video'.
To use the `rsync` protocol without the `ssh`-tunnel, use
'rsync::USER@HOST/SRC'. For more information have a look at the manpage
of `rsync`(1).
 

Detailed description of "destination"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
`destination` must be a text file containing the destination directory.
`destination` *USED* to be a link to the destination directory in
earlier versions, so do not be confused if you see such examples.


Example:
--------------------------------------------------------------------------------
   [11:36] zaphodbeeblebrox:ccollect-0.2% cat conf/sources/testsource2/destination 
   /home/nico/backupdir
--------------------------------------------------------------------------------


Detailed description of "remote_host"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
`remote_host` must be a text file containing the destination host.
If this file is existing, you are backing up your data *TO* this host
and *not* to you local host.

*Warning*: You need to have `ssh` access to the remote host. `rsync` and
`ccollect` will connect to that host via `ssh`. `ccollect` needs the shell
access, because it needs to find out how many backups exist on the remote
host and to be able to delete them.


Example:
--------------------------------------------------------------------------------
   [10:17] denkbrett:ccollect-0.7.0% cat conf/sources/remote1/remote_host
   home.schottelius.org
--------------------------------------------------------------------------------

It may contain all the ssh-specific values like 'myuser@yourhost.ch'.


Detailed description of "verbose"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
`verbose` tells `ccollect` that the log should contain verbose messages.

If this file exists in the source specification *-v* will be passed to `rsync`.


Example:
--------------------------------------------------------------------------------
   [11:35] zaphodbeeblebrox:ccollect-0.2% touch conf/sources/testsource1/verbose
--------------------------------------------------------------------------------


Detailed description of "very_verbose"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
`very_verbose` tells `ccollect` that it should log very verbosely.

If this file exists in the source specification *-v* will be passed to
`rsync`, `rm` and `mkdir`.


Example:
--------------------------------------------------------------------------------
   [23:67] nohost:~% touch conf/sources/testsource1/very_verbose
--------------------------------------------------------------------------------


Detailed description of "summary"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you create the file `summary` in the source definition,
`ccollect` will present you a nice summary at the end.

-------------------------------------------------------------------------------
backup:~# touch /etc/ccollect/sources/root/summary
backup:~# ccollect.sh werktags root
==> ccollect.sh: Beginning backup using interval werktags <==
[root] Beginning to backup this source ...
[root] Currently 3 backup(s) exist, total keeping 50 backup(s).
[root] Beginning to backup, this may take some time...
[root] Hard linking...
[root] Transferring files...
[root] 
[root] Number of files: 84183
[root] Number of files transferred: 32
[root] Total file size: 26234080536 bytes
[root] Total transferred file size: 9988252 bytes
[root] Literal data: 9988252 bytes
[root] Matched data: 0 bytes
[root] File list size: 3016771
[root] File list generation time: 1.786 seconds
[root] File list transfer time: 0.000 seconds
[root] Total bytes sent: 13009119
[root] Total bytes received: 2152
[root] 
[root] sent 13009119 bytes  received 2152 bytes  2891393.56 bytes/sec
[root] total size is 26234080536  speedup is 2016.26
[root] Successfully finished backup.
==> Finished ccollect.sh <==
-------------------------------------------------------------------------------

You could also combine it with `verbose` or `very_verbose`, but these
already print some statistics (though not all / the same as presented by
`summary`).


Detailed description of "exclude"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
`exclude` specifies a list of paths to exclude. The entries are seperated by a newline (\n).


Example:
--------------------------------------------------------------------------------
   [11:35] zaphodbeeblebrox:ccollect-0.2% cat conf/sources/testsource2/exclude 
   openvpn-2.0.1.tar.gz
   nicht_reinnehmen
   etwas mit leerzeichenli
   something with spaces is not a problem
--------------------------------------------------------------------------------


Detailed description of "intervals/"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When you create the subdirectory `intervals/` in your source configuration
directory, you can specify individiual intervals for this specific source.
Each file in this directory describes an interval.


Example:
--------------------------------------------------------------------------------
   [11:37] zaphodbeeblebrox:ccollect-0.2% ls -l conf/sources/testsource2/intervals/      
   insgesamt 8
   -rw-r--r--  1 nico users 2 2005-12-07 17:38 daily
   -rw-r--r--  1 nico users 3 2005-12-14 11:33 yearly
   [11:37] zaphodbeeblebrox:ccollect-0.2% cat  conf/sources/testsource2/intervals/*
   5
   20
--------------------------------------------------------------------------------


Detailled description of "rsync_options"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When you create the file `rsync_options` in your source configuration,
all the parameters in this file will be passed to rsync. This
way you can pass additional options to rsync. For instance you can tell rsync
to show progress ("--progress"), or which -password-file ("--password-file")
to use for automatic backup over the rsync-protocol.


Example:
--------------------------------------------------------------------------------
   [23:42] hydrogenium:ccollect-0.2% cat conf/sources/test_rsync/rsync_options
   --password-file=/home/user/backup/protected_password_file
--------------------------------------------------------------------------------


Detailled description of "pre_exec" and "post_exec"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When you create `pre_exec` and / or `post_exec` in your source
configuration, `ccollect` will execute this command before and
respectively after doing the backup for *this specific* source.
If you want to have pre-/post-exec before and after *all*
backups, see above for general configuration.

If `pre_exec` exits with a non-zero return code, the backup
process of `this source` will be aborted (i.e. backup skipped).

The `post_exec` script can access the following exported variables from
ccollect:

- 'name': name of the source that is being backed up
- 'destination_name': contains the base directory name (`daily.20091031-1013.24496`)
- 'destination_dir': full path (`/tmp/ccollect/daily.20091031-1013.24496`)
- 'destination_full': like 'destination_dir', but prepended with the remote_host, if set (`host:/tmp/ccollect/daily.20091031-1013.24496` or `/tmp/ccollect/daily.20091031-1013.24496`)

Example:
--------------------------------------------------------------------------------
[13:09] hydrogenium:ccollect-0.3% cat conf/sources/with_exec/pre_exec 
#!/bin/sh

# Show whats free before
df -h
[13:09] hydrogenium:ccollect-0.3% cat conf/sources/with_exec/post_exec 
#!/bin/sh

# Show whats free after
df -h
--------------------------------------------------------------------------------


Detailed description of "delete_incomplete"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you create the file `delete_incomplete` in a source specification directory,
`ccollect` will look for incomplete backups (when the whole `ccollect` process
was interrupted) and remove them. Without this file `ccollect` will only warn
the user.


Detailed description of "rsync_failure_codes"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you have the file `rsync_failure_codes` in your source configuration
directory, it should contain a newline-separated list of numbers representing
rsync exit codes. If rsync exits with any code in this list, a marker will
be left in the destination directory indicating failure of this backup.  If
you have enabled delete_incomplete, then this backup will be deleted during
the next ccollect run on the same interval.


Detailed description of "mtime"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
By default, ccollect.sh chooses the most recent backup directory for cloning or
the oldest for deletion based on the directory's last change time (ctime).
With this option, the sorting is done based on modification time (mtime). With
this version of ccollect, the ctime and mtime of your backups will normally
be the same and this option has no effect.  However, if you, for example, move
your backups to another hard disk using cp -a or rsync -a, you should use this
option because the ctimes are not preserved during such operations.

If you have any backups in your repository made with ccollect version 0.7.1 or
earlier, do not use this option.


Detailed description of "quiet_if_down"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
By default, ccollect.sh emits a series of error messages if a source is not
connectable.  With this option enabled, ccollect still reports that the
source is not connectable but the associated error messages generated by
rsync or ssh are suppressed.  You may want to use this option for sources,
like notebook PCs, that are often disconnected.


Hints
-----

Smart logging
~~~~~~~~~~~~~
Since ccollect-0.6.1 you can use the ccollect-logwrapper.sh(1) for logging.
You call it the same way you call ccollect.sh and it will create a
logfile containing the output of ccollect.sh. For more information look
at the manpage 'ccollect-logwrapper'. The following is an example running
ccollect-logwrapper.sh:

--------------------------------------------------------------------------------
u0219 ~ # ~chdscni9/ccollect-logwrapper.sh daily u0160.nshq.ch.netstream.com
ccollect-logwrapper.sh (11722): Starting with arguments: daily u0160.nshq.ch.netstream.com
ccollect-logwrapper.sh (11722): Finished.
--------------------------------------------------------------------------------


Using a different ssh port
~~~~~~~~~~~~~~~~~~~~~~~~~~
Mostly easy is to use your ~/.ssh/config file:

--------------------------------------------------------------------------------
host mx2.schottelius.org
   Port 2342
--------------------------------------------------------------------------------

If you only use that port for backup only and normally want to use another port,
you can add 'HostName' and "HostKeyAlias" (if you also have different
keys on the different ports):

--------------------------------------------------------------------------------
Host hhydrogenium
   Hostname bruehe.schottelius.org
   Port 666
   HostKeyAlias hydrogenium

Host bruehe
   Hostname bruehe.schottelius.org
   Port 22
   HostKeyAlias bruehe.schottelius.org
--------------------------------------------------------------------------------


Using source names or interval in pre_/post_exec scripts
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The pre-/post_exec scripts can access some internal variables from `ccollect`:

- 'INTERVAL': The interval specified on the command line
- 'no_sources': number of sources
- 'source_$NUM': the name of the source
- 'name': the name of the currently being backuped source (not available for
  generic pre_exec script)

Only available for `post_exec`:

- 'remote_host': name of host we backup to (empty if unused)


Using rsync protocol without ssh
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you have a computer with little computing power, it may be useful to use
rsync without ssh, directly using the rsync protocol
(specify 'user@host::share' in `source`). You may wish to use
`rsync_options` to specify a password file to use for automatic backup.


Example:
--------------------------------------------------------------------------------
backup:~# cat /etc/ccollect/sources/sample.backup.host.org/source         
backup@webserver::backup-share

backup:~# cat /etc/ccollect/sources/sample.backup.host.org/rsync_options 
--password-file=/etc/ccollect/sources/sample.backup.host.org/rsync_password

backup:~# cat /etc/ccollect/sources/sample.backup.host.org/rsync_password 
this_is_the_rsync_password
--------------------------------------------------------------------------------
This hint was reported by Daniel Aubry.


Not excluding top-level directories
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you exclude "/proc" or "/mnt" from your backup, you may run into
trouble when you restore your backup. When you use "/proc/\*" or "/mnt/\*"
instead, `ccollect` will backup empty directories.


[NOTE]
===========================================
When those directories contain hidden files
(those beginning with a dot (*.*)),
they will still be transferred!
===========================================
This hint was reported by Marcus Wagner.


Re-using already created rsync-backups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you used `rsync` directly before you use `ccollect`, you can
use this old backup as initial backup for `ccollect`: You
simply move it into a directory below the destination directory
and name it "'interval'.0".


Example:
-------------------------------------------------------------------------------
backup:/home/backup/web1# ls
bin   dev  etc   initrd  lost+found  mnt  root  srv  usr  vmlinuz
boot  doc  home  lib     media       opt  sbin  tmp  var  vmlinuz.old

backup:/home/backup/web1# mkdir daily.0

# ignore error about copying to itself
backup:/home/backup/web1# mv * daily.0 2>/dev/null

backup:/home/backup/web1# ls
daily.0
-------------------------------------------------------------------------------
Now you can use /home/backup/web1 as the `destination` for the backup.

[NOTE]
===============================================================================
It does not matter anymore how you name your directory, as `ccollect` uses
the -c option from `ls` to find out which directory to clone from.
===============================================================================


[NOTE]
===============================================================================
Older versions (pre 0.6, iirc) had a problem, if you named the first backup
something like "daily.initial". It was needed to use the "*0*" (or some
number that is lower than the current year) as extension. `ccollect`
used `sort` to find the latest backup. `ccollect` itself uses
'interval.YEARMONTHDAY-HOURMINUTE.PID'. This notation was *always* before
"daily.initial", as numbers are earlier in the list
which is produced by `sort`. So, if you had a directory named "daily.initial",
`ccollect` always diffed against this backup and transfered and deleted
files which where deleted in previous backups. This means you simply
wasted resources, but your backup had beer complete anyway.
===============================================================================


Using pre_/post_exec
~~~~~~~~~~~~~~~~~~~~
Your pre_/post_exec script does not need to be a script, you can also
use a link to

   - an existing program
   - an already written script

The only requirement is that it is executable.


Using source specific interval definitions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you are backing up multiple hosts via cron each night, it may be
a problem that host "big_server" may only have 4 daily backups, because
otherwise its backup device will be full. But for all other hosts
you want to keep 20 daily backups. In this case you would create
`/etc/ccollect/default/intervals/daily` containing "20" and
`/etc/ccollect/sources/big_server/intervals/daily` containing "4".

Source specific intervals always overwrite the default values.
If you have to specify it individually for every host, because
of different requirements, you can even omit creating
`/etc/ccollect/default/intervals/daily`.


Comparing backups
~~~~~~~~~~~~~~~~~
If you want to see what changed between two backups, you can use
`rsync` directly:

--------------------------------------------------------------------------------
[12:00] u0255:ddba034.netstream.ch#  rsync -n -a --delete --stats --progress daily.20080324-0313.17841/ daily.20080325-0313.31148/
--------------------------------------------------------------------------------
This results in a listing of changes. Because we pass -n to rsync no transfer
is made (i.e. report only mode).

This hint was reported by Daniel Aubry.


Testing for host reachabilty
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you want to test whether the host you try to backup is reachable, you can use
the following script as source specific pre-exec:

--------------------------------------------------------------------------------
#!/bin/sh
# ping -c1 -q `cat "/etc/ccollect/sources/$name/source" | cut -d"@" -f2 | cut -d":" -f1`
--------------------------------------------------------------------------------

This prevents the deletion of old backups, if the host is not reachable.

This hint was reported by Daniel Aubry.


Easy check for errors
~~~~~~~~~~~~~~~~~~~~~
If you want to see whether there have been any errors while doing the backup,
you can run `ccollect` together with `ccollect_analyse_logs.sh`:
--------------------------------------------------------------------------------
$ ccollect | ccollect_analyse_logs.sh e
--------------------------------------------------------------------------------


F.A.Q.
------

What happens if one backup is broken or empty?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Let us assume that one backup failed (connection broke or the source
hard disk had some failures). Therefore we've got one incomplete backup in our history.

`ccollect` will transfer the missing files the next time you use it.
This leads to

   - more transferred files
   - much greater disk space usage, as no hardlinks can be used

If the whole `ccollect` process was interrupted, `ccollect` (since 0.6) can
detect that and remove the incomplete backups, so you can clone from a complete
backup instead


When backing up from localhost the destination is also included. Is this a bug?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No. `ccollect` passes your source definition directly to `rsync`. It
does not try to analyze it. So it actually does not know if a source
comes from local harddisk or from a remote server. And it does not want
to. When you backup from the local harddisk (which is perhaps not
even a good idea when thinking of security), add the `destination`
to 'source/exclude'. (Daniel Aubry reported this problem)


Why does ccollect say "Permission denied" with my pre-/postexec script?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The most common error is that you have not given your script the correct
permissions. Try `chmod 0755 /etc/ccollect/sources/'yoursource'/*_exec``.


Why does the backup job fail when part of the source is a link?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When a part of your path you specified in the source is a
(symbolic, hard links are not possible for directories) link,
the backup *must* fail.

First of all, let us have a look at how it looks like:

-------------------------------------------------------------------------------
==> ccollect 0.4: Beginning backup using interval taeglich <==
[testsource] Sa Apr 29 00:01:55 CEST 2006 Beginning to backup
[testsource] Currently 0 backup(s) exist(s), total keeping 10 backup(s).
[testsource] Beginning to backup, this may take some time...
[testsource] Creating /etc/ccollect/sources/testsource/destination/taeglich.2006-04-29-0001.3874 ...
[testsource] Sa Apr 29 00:01:55 CEST 2006 Transferring files...
[testsource] rsync: recv_generator: mkdir "/etc/ccollect/sources/testsource/destination/taeglich.2006-04-29-0001.3874/home/user/nico/projekte/ccollect" failed: No such file or directory (2)
[testsource] rsync: stat "/etc/ccollect/sources/testsource/destination/taeglich.2006-04-29-0001.3874/home/user/nico/projekte/ccollect" failed: No such file or directory (2)
[...]
-------------------------------------------------------------------------------

So what is the problem? It is very obvious when you look deeper into it:

-------------------------------------------------------------------------------
% cat /etc/ccollect/sources/testsource/source
/home/user/nico/projekte/ccollect/ccollect-0.4
% ls -l /home/user/nico/projekte
lrwxrwxrwx 1 nico nico 29 2005-12-02 23:28 /home/user/nico/projekte -> oeffentlich/computer/projekte
% ls -l /etc/ccollect/sources/testsource/destination/taeglich.2006-04-29-0001.3874/home/user/nico
lrwxrwxrwx 1 nico nico 29 2006-04-29 00:01 projekte -> oeffentlich/computer/projekte
-------------------------------------------------------------------------------

`rsync` creates the directory structure before it creates the symbolic link.
This link now links to something not reachable (dead link). It is
impossible to create subdirectories under the broken link.

In conclusion you cannot use paths with a linked part.

However, you can backup directories containing symbolic links
(in this case you could backup /home/user/nico, which contains
/home/user/nico/projekte and oeffentlich/computer/projekte).


How can I prevent missing the right time to enter my password?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As `ccollect` first deletes the old backups, it may take some time
until `rsync` requests the password for the `ssh` session from you.

The easiest way not to miss that point is running `ccollect` in `screen`,
which has the ability to monitor the output for activity. So as soon as
your screen beeps, after `ccollect` began to remove the last directory,
you can enter your password (have a look at screen(1), especially "C-a M"
and "C-a _", for more information).


Backup fails, if autofs is running, but sources not reachable
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are trying to backup a system containing paths that are managed
by autofs, you may run into this error:

-------------------------------------------------------------------------------
2009-12-01-23:14:15: ccollect 0.8.1: Beginning backup using interval monatlich
[ikn] 2009-12-01-23:14:15: Beginning to backup
[ikn] 2009-12-01-23:14:15: Executing /home/users/nico/ethz/ccollect/sources/ikn/pre_exec ... 
Enter LUKS passphrase: 
[ikn] Command successful.
[ikn] key slot 0 unlocked.
[ikn] 2009-12-01-23:14:23: Finished /home/users/nico/ethz/ccollect/sources/ikn/pre_exec (return code 0). [ikn] directory has vanished: "/home/users/nico/privat/firmen/ethz/autofs/projects"
[ikn] directory has vanished: "/home/users/nico/privat/firmen/ethz/autofs/scratch"
[ikn] directory has vanished: "/home/users/nico/privat/firmen/ethz/autofs/sgscratch"
[ikn] directory has vanished: "/home/users/nico/privat/firmen/ethz/autofs/supp"
[ikn] directory has vanished: "/home/users/nico/privat/firmen/ethz/autofs/sysadmin"
[ikn] rsync warning: some files vanished before they could be transferred (code 24) at main.c(1057) [sender=3.0.6] 
[ikn] 2009-12-01-23:44:23: Source / is not readable. Skipping.
-------------------------------------------------------------------------------

Thus, if you are unsure whether autofs paths can be mounted during backup,
stop autofs in pre_exec and reenable it in post_exec.


Examples
--------

A backup host configuration from scratch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

--------------------------------------------------------------------------------
srwali01:~# mkdir /etc/ccollect
srwali01:~# mkdir -p /etc/ccollect/defaults/intervals/
srwali01:~# echo 28 > /etc/ccollect/defaults/intervals/taeglich
srwali01:~# echo 52 > /etc/ccollect/defaults/intervals/woechentlich
srwali01:~# cd /etc/ccollect/
srwali01:/etc/ccollect# mkdir sources
srwali01:/etc/ccollect# cd sources/
srwali01:/etc/ccollect/sources# ls
srwali01:/etc/ccollect/sources# mkdir local-root
srwali01:/etc/ccollect/sources# cd local-root/
srwali01:/etc/ccollect/sources/local-root# echo / > source
srwali01:/etc/ccollect/sources/local-root# cat > exclude << EOF
> /proc
> /sys
> /mnt
> EOF
srwali01:/etc/ccollect/sources/local-root# echo /mnt/hdbackup/local-root > destination
srwali01:/etc/ccollect/sources/local-root# mkdir /mnt/hdbackup/local-root
srwali01:/etc/ccollect/sources/local-root# ccollect.sh taeglich local-root
/o> ccollect.sh: Beginning backup using interval taeglich
/=> Beginning to backup "local-root" ...
|-> 0 backup(s) already exist, keeping 28 backup(s).
--------------------------------------------------------------------------------


After that, I added some more sources:
--------------------------------------------------------------------------------
srwali01:~# cd /etc/ccollect/sources
srwali01:/etc/ccollect/sources# mkdir windos-wl6
srwali01:/etc/ccollect/sources# cd windos-wl6/
srwali01:/etc/ccollect/sources/windos-wl6# echo /mnt/win/SYS/WL6 > source
srwali01:/etc/ccollect/sources/windos-wl6# echo /mnt/hdbackup/wl6 > destination
srwali01:/etc/ccollect/sources/windos-wl6# mkdir /mnt/hdbackup/wl6
srwali01:/etc/ccollect/sources/windos-wl6# cd ..
srwali01:/etc/ccollect/sources# mkdir windos-daten
srwali01:/etc/ccollect/sources/windos-daten# echo /mnt/win/Daten > source
srwali01:/etc/ccollect/sources/windos-daten# echo /mnt/hdbackup/windos-daten > destination
srwali01:/etc/ccollect/sources/windos-daten# mkdir /mnt/hdbackup/windos-daten

# Now add some remote source
srwali01:/etc/ccollect/sources/windos-daten# cd ..
srwali01:/etc/ccollect/sources# mkdir srwali03
srwali01:/etc/ccollect/sources# cd srwali03/
srwali01:/etc/ccollect/sources/srwali03# cat > exclude << EOF
> /proc
> /sys
> /mnt
> /home
> EOF
srwali01:/etc/ccollect/sources/srwali03# echo 'root@10.103.2.3:/' > source
srwali01:/etc/ccollect/sources/srwali03# echo /mnt/hdbackup/srwali03 > destination
srwali01:/etc/ccollect/sources/srwali03# mkdir /mnt/hdbackup/srwali03
--------------------------------------------------------------------------------


Using hard-links requires less disk space
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-------------------------------------------------------------------------
# du (coreutils) 5.2.1
[10:53] srsyg01:sources% du -sh ~/backupdir 
4.6M    /home/nico/backupdir
[10:53] srsyg01:sources% du -sh ~/backupdir/*
4.1M    /home/nico/backupdir/daily.2005-12-08-10:52.28456
4.1M    /home/nico/backupdir/daily.2005-12-08-10:53.28484
4.1M    /home/nico/backupdir/daily.2005-12-08-10:53.28507
4.1M    /home/nico/backupdir/daily.2005-12-08-10:53.28531
4.1M    /home/nico/backupdir/daily.2005-12-08-10:53.28554
4.1M    /home/nico/backupdir/daily.2005-12-08-10:53.28577

srwali01:/etc/ccollect/sources# du -sh /mnt/hdbackup/wl6/         
186M    /mnt/hdbackup/wl6/
srwali01:/etc/ccollect/sources# du -sh /mnt/hdbackup/wl6/*
147M    /mnt/hdbackup/wl6/taeglich.2005-12-08-14:42.312
147M    /mnt/hdbackup/wl6/taeglich.2005-12-08-14:45.588
-------------------------------------------------------------------------

The backup of our main fileserver:
-------------------------------------------------------------------------
backup:~# df -h /home/backup/srsyg01/ 
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/backup--01-srsyg01
                      591G  451G  111G  81% /home/backup/srsyg01
backup:~# du -sh /home/backup/srsyg01/*
432G    /home/backup/srsyg01/daily.2006-01-24-01:00.15990
432G    /home/backup/srsyg01/daily.2006-01-26-01:00.30152
434G    /home/backup/srsyg01/daily.2006-01-27-01:00.4596
435G    /home/backup/srsyg01/daily.2006-01-28-01:00.11998
437G    /home/backup/srsyg01/daily.2006-01-29-01:00.19115
437G    /home/backup/srsyg01/daily.2006-01-30-01:00.26405
438G    /home/backup/srsyg01/daily.2006-01-31-01:00.1148
439G    /home/backup/srsyg01/daily.2006-02-01-01:00.8321
439G    /home/backup/srsyg01/daily.2006-02-02-01:00.15383
439G    /home/backup/srsyg01/daily.2006-02-03-01:00.22567
16K     /home/backup/srsyg01/lost+found
backup:~# du --version | head -n1
du (coreutils) 5.2.1
-------------------------------------------------------------------------

Newer versions of du also detect the hardlinks, so we can even compare
the sizes directly with du:
-------------------------------------------------------------------------
[8:16] eiche:~# du --version | head -n 1
du (GNU coreutils) 5.93
[8:17] eiche:schwarzesloch# du -slh hydrogenium/*                                  
19G     hydrogenium/durcheinander.0
18G     hydrogenium/durcheinander.2006-01-17-00:27.13820
19G     hydrogenium/durcheinander.2006-01-25-23:18.31328
19G     hydrogenium/durcheinander.2006-01-26-00:11.3332
[8:22] eiche:schwarzesloch# du -sh hydrogenium/* 
19G     hydrogenium/durcheinander.0
12G     hydrogenium/durcheinander.2006-01-17-00:27.13820
1.5G    hydrogenium/durcheinander.2006-01-25-23:18.31328
200M    hydrogenium/durcheinander.2006-01-26-00:11.3332
-------------------------------------------------------------------------

In the second report (without -l) the sizes include the space the inodes of
the hardlinks allocate.


A collection of backups on the backup server
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All the data of my important hosts is backuped to eiche into
/mnt/schwarzesloch/backup:

-------------------------------------------------------------------------
[9:24] eiche:backup# ls *
creme:
woechentlich.2006-01-26-22:22.4153   woechentlich.2006-02-12-11:48.2461
woechentlich.2006-01-26-22:23.4180   woechentlich.2006-02-18-23:00.7898
woechentlich.2006-02-05-02:43.14281  woechentlich.2006-02-25-23:00.13480
woechentlich.2006-02-06-00:24.15509  woechentlich.2006-03-04-23:00.25439

hydrogenium:
durcheinander.2006-01-27-11:16.6391   durcheinander.2006-02-13-01:07.2895
durcheinander.2006-01-30-19:29.9505   durcheinander.2006-02-17-08:20.6707
durcheinander.2006-01-30-22:27.9623   durcheinander.2006-02-24-16:24.12461
durcheinander.2006-02-03-09:52.12885  durcheinander.2006-03-03-19:17.18075
durcheinander.2006-02-05-23:00.15068  durcheinander.2006-03-17-22:41.5007

scice:
woechentlich.2006-02-04-10:32.13766  woechentlich.2006-02-16-23:00.6185
woechentlich.2006-02-05-23:02.15093  woechentlich.2006-02-23-23:00.11783
woechentlich.2006-02-06-08:22.15994  woechentlich.2006-03-02-23:00.17346
woechentlich.2006-02-06-19:40.16321  woechentlich.2006-03-09-23:00.29317
woechentlich.2006-02-12-11:51.2514   woechentlich.2006-03-16-23:00.4218
-------------------------------------------------------------------------

And this incremental backup and the archive are copied to an external
usb harddisk (attention: you *should* really use -H to backup the backup):

-------------------------------------------------------------------------
[9:23] eiche:backup# df -h
Filesystem            Size  Used Avail Use% Mounted on
rootfs                 14G  8.2G  4.9G  63% /
/dev/root              14G  8.2G  4.9G  63% /
/dev/root              14G  8.2G  4.9G  63% /dev/.static/dev
tmpfs                  10M  444K  9.6M   5% /dev
/dev/hdh               29G  3.7M   29G   1% /mnt/datenklo
tmpfs                 110M  4.0K  110M   1% /dev/shm
/dev/mapper/nirvana   112G   90G   23G  81% /mnt/datennirvana
/dev/mapper/schwarzes-loch
                      230G  144G   86G  63% /mnt/schwarzesloch
/dev/mapper/archiv     38G   20G   19G  52% /mnt/archiv
/dev/mapper/usb-backup
                      280G   36M  280G   1% /mnt/usb/backup
[9:24] eiche:backup# cat ~/bin/sync-to-usb       
DDIR=/mnt/usb/backup

rsync -av -H --delete /mnt/schwarzesloch/ "$DDIR/schwarzesloch/"

rsync -av -H --delete /mnt/archiv/ "$DDIR/archiv/"
-------------------------------------------------------------------------


Processes running when doing ccollect -j
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Truncated output from `ps axuwwwf`:

-------------------------------------------------------------------------
   S+   11:40   0:00  |   |   |   \_ /bin/sh /usr/local/bin/ccollect.sh daily -j ddba034 ddba045 ddba046 ddba047 ddba049 ddna010 ddna011
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba034
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba034
   R+   11:40  23:40  |   |   |       |   |   \_ rsync -a --delete --numeric-ids --relative --delete-excluded --link-dest=/home/server/backup/ddba034
   S+   11:40   0:00  |   |   |       |   |       \_ ssh -l root ddba034.netstream.ch rsync --server --sender -vlogDtprR --numeric-ids . /
   S+   11:41   0:11  |   |   |       |   |       \_ rsync -a --delete --numeric-ids --relative --delete-excluded --link-dest=/home/server/backup/ddb
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba034
   S+   11:40   0:00  |   |   |       |       \_ sed s:^:\[ddba034\] :
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba045
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba045
   R+   11:40   0:02  |   |   |       |   |   \_ rm -rf /etc/ccollect/sources/ddba045/destination/daily.2006-10-19-1807.6934
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba045
   S+   11:40   0:00  |   |   |       |       \_ sed s:^:\[ddba045\] :
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba046
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba046
   R+   11:40   0:02  |   |   |       |   |   \_ rm -rf /etc/ccollect/sources/ddba046/destination/daily.2006-10-19-1810.7072
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba046
   S+   11:40   0:00  |   |   |       |       \_ sed s:^:\[ddba046\] :
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba047
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba047
   R+   11:40   0:03  |   |   |       |   |   \_ rm -rf /etc/ccollect/sources/ddba047/destination/daily.2006-10-19-1816.7268
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba047
   S+   11:40   0:00  |   |   |       |       \_ sed s:^:\[ddba047\] :
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba049
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba049
   D+   11:40   0:03  |   |   |       |   |   \_ rm -rf /etc/ccollect/sources/ddba049/destination/daily.2006-10-19-1821.7504
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddba049
   S+   11:40   0:00  |   |   |       |       \_ sed s:^:\[ddba049\] :
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddna010
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddna010
   R+   11:40   0:03  |   |   |       |   |   \_ rm -rf /etc/ccollect/sources/ddna010/destination/daily.2006-10-19-1805.6849
   S+   11:40   0:00  |   |   |       |   \_ /bin/sh /usr/local/bin/ccollect.sh daily ddna010
   S+   11:40   0:00  |   |   |       |       \_ sed s:^:\[ddna010\] :
   S+   11:40   0:00  |   |   |       \_ /bin/sh /usr/local/bin/ccollect.sh daily ddna011
   S+   11:40   0:00  |   |   |           \_ /bin/sh /usr/local/bin/ccollect.sh daily ddna011
   R+   12:08   0:00  |   |   |           |   \_ rm -rf /etc/ccollect/sources/ddna011/destination/daily.2006-10-20-1502.7824
   S+   11:40   0:00  |   |   |           \_ /bin/sh /usr/local/bin/ccollect.sh daily ddna011
   S+   11:40   0:00  |   |   |               \_ sed s:^:\[ddna011\] :

-------------------------------------------------------------------------
As you can see, six processes are deleting old backups, while one backup
(ddba034) is already copying data.