Initial __netbox type

type/__netbox/files/configuration.py.sh

@@ -0,0 +1,258 @@
+#!/bin/sh
+
+cat << EOF
+#########################
+#                       #
+#   Required settings   #
+#                       #
+#########################
+
+# This is a list of valid fully-qualified domain names (FQDNs) for the NetBox server. NetBox will not permit write
+# access to the server via any other hostnames. The first FQDN in the list will be treated as the preferred name.
+#
+# Example: ALLOWED_HOSTS = ['netbox.example.com', 'netbox.internal.local']
+ALLOWED_HOSTS = [ '$ALLOWED_HOST' ]
+
+# PostgreSQL database configuration. See the Django documentation for a complete list of available parameters:
+#   https://docs.djangoproject.com/en/stable/ref/settings/#databases
+DATABASE = {
+    'NAME': '$DATABASE_NAME', # Database name
+    'USER': '$DATABASE_USER', # PostgreSQL username
+    'PASSWORD': '$DATABASE_PASSWORD', # PostgreSQL password
+    'HOST': 'localhost',      # Database server
+    'PORT': '',               # Database port (leave blank for default)
+    'CONN_MAX_AGE': 300,      # Max database connection age
+}
+
+# Redis database settings. Redis is used for caching and for queuing background tasks such as webhook events. A separate
+# configuration exists for each. Full connection details are required in both sections, and it is strongly recommended
+# to use two separate database IDs.
+REDIS = {
+    'tasks': {
+        'HOST': 'localhost',
+        'PORT': 6379,
+        # Comment out \`HOST\` and \`PORT\` lines and uncomment the following if using Redis Sentinel
+        # 'SENTINELS': [('mysentinel.redis.example.com', 6379)],
+        # 'SENTINEL_SERVICE': 'netbox',
+        'PASSWORD': '',
+        'DATABASE': 0,
+        'DEFAULT_TIMEOUT': 300,
+        'SSL': False,
+    },
+    'caching': {
+        'HOST': 'localhost',
+        'PORT': 6379,
+        # Comment out \`HOST\` and \`PORT\` lines and uncomment the following if using Redis Sentinel
+        # 'SENTINELS': [('mysentinel.redis.example.com', 6379)],
+        # 'SENTINEL_SERVICE': 'netbox',
+        'PASSWORD': '',
+        'DATABASE': 1,
+        'DEFAULT_TIMEOUT': 300,
+        'SSL': False,
+    }
+}
+
+# This key is used for secure generation of random numbers and strings. It must never be exposed outside of this file.
+# For optimal security, SECRET_KEY should be at least 50 characters in length and contain a mix of letters, numbers, and
+# symbols. NetBox will not run without this defined. For more information, see
+# https://docs.djangoproject.com/en/stable/ref/settings/#std:setting-SECRET_KEY
+SECRET_KEY = '$SECRET_KEY'
+
+
+#########################
+#                       #
+#   Optional settings   #
+#                       #
+#########################
+
+# Specify one or more name and email address tuples representing NetBox administrators. These people will be notified of
+# application errors (assuming correct email settings are provided).
+ADMINS = [
+    # ['John Doe', 'jdoe@example.com'],
+]
+
+# URL schemes that are allowed within links in NetBox
+ALLOWED_URL_SCHEMES = (
+    'file', 'ftp', 'ftps', 'http', 'https', 'irc', 'mailto', 'sftp', 'ssh', 'tel', 'telnet', 'tftp', 'vnc', 'xmpp',
+)
+
+# Optionally display a persistent banner at the top and/or bottom of every page. HTML is allowed. To display the same
+# content in both banners, define BANNER_TOP and set BANNER_BOTTOM = BANNER_TOP.
+BANNER_TOP = ''
+BANNER_BOTTOM = ''
+
+# Text to include on the login page above the login form. HTML is allowed.
+BANNER_LOGIN = ''
+
+# Base URL path if accessing NetBox within a directory. For example, if installed at http://example.com/netbox/, set:
+# BASE_PATH = 'netbox/'
+BASE_PATH = ''
+
+# Cache timeout in seconds. Set to 0 to dissable caching. Defaults to 900 (15 minutes)
+CACHE_TIMEOUT = 900
+
+# Maximum number of days to retain logged changes. Set to 0 to retain changes indefinitely. (Default: 90)
+CHANGELOG_RETENTION = 90
+
+# API Cross-Origin Resource Sharing (CORS) settings. If CORS_ORIGIN_ALLOW_ALL is set to True, all origins will be
+# allowed. Otherwise, define a list of allowed origins using either CORS_ORIGIN_WHITELIST or
+# CORS_ORIGIN_REGEX_WHITELIST. For more information, see https://github.com/ottoyiu/django-cors-headers
+CORS_ORIGIN_ALLOW_ALL = False
+CORS_ORIGIN_WHITELIST = [
+    # 'https://hostname.example.com',
+]
+CORS_ORIGIN_REGEX_WHITELIST = [
+    # r'^(https?://)?(\w+\.)?example\.com$',
+]
+
+# Set to True to enable server debugging. WARNING: Debugging introduces a substantial performance penalty and may reveal
+# sensitive information about your installation. Only enable debugging while performing testing. Never enable debugging
+# on a production system.
+DEBUG = False
+
+# Email settings
+EMAIL = {
+    'SERVER': 'localhost',
+    'PORT': 25,
+    'USERNAME': '',
+    'PASSWORD': '',
+    'USE_SSL': False,
+    'USE_TLS': False,
+    'TIMEOUT': 10,  # seconds
+    'FROM_EMAIL': '',
+}
+
+# Enforcement of unique IP space can be toggled on a per-VRF basis. To enforce unique IP space within the global table
+# (all prefixes and IP addresses not assigned to a VRF), set ENFORCE_GLOBAL_UNIQUE to True.
+ENFORCE_GLOBAL_UNIQUE = False
+
+# Exempt certain models from the enforcement of view permissions. Models listed here will be viewable by all users and
+# by anonymous users. List models in the form \`<app>.<model>\`. Add '*' to this list to exempt all models.
+EXEMPT_VIEW_PERMISSIONS = [
+    # 'dcim.site',
+    # 'dcim.region',
+    # 'ipam.prefix',
+]
+
+# HTTP proxies NetBox should use when sending outbound HTTP requests (e.g. for webhooks).
+# HTTP_PROXIES = {
+#     'http': 'http://10.10.1.10:3128',
+#     'https': 'http://10.10.1.10:1080',
+# }
+
+# IP addresses recognized as internal to the system. The debugging toolbar will be available only to clients accessing
+# NetBox from an internal IP.
+INTERNAL_IPS = ('127.0.0.1', '::1')
+
+# Enable custom logging. Please see the Django documentation for detailed guidance on configuring custom logs:
+#   https://docs.djangoproject.com/en/stable/topics/logging/
+LOGGING = {}
+
+# Setting this to True will permit only authenticated users to access any part of NetBox. By default, anonymous users
+# are permitted to access most data in NetBox (excluding secrets) but not make any changes.
+LOGIN_REQUIRED = False
+
+# The length of time (in seconds) for which a user will remain logged into the web UI before being prompted to
+# re-authenticate. (Default: 1209600 [14 days])
+LOGIN_TIMEOUT = None
+
+# Setting this to True will display a "maintenance mode" banner at the top of every page.
+MAINTENANCE_MODE = False
+
+# An API consumer can request an arbitrary number of objects =by appending the "limit" parameter to the URL (e.g.
+# "?limit=1000"). This setting defines the maximum limit. Setting it to 0 or None will allow an API consumer to request
+# all objects by specifying "?limit=0".
+MAX_PAGE_SIZE = 1000
+
+# The file path where uploaded media such as image attachments are stored. A trailing slash is not needed. Note that
+# the default value of this setting is derived from the installed location.
+# MEDIA_ROOT = '/opt/netbox/netbox/media'
+
+# By default uploaded media is stored on the local filesystem. Using Django-storages is also supported. Provide the
+# class path of the storage driver in STORAGE_BACKEND and any configuration options in STORAGE_CONFIG. For example:
+# STORAGE_BACKEND = 'storages.backends.s3boto3.S3Boto3Storage'
+# STORAGE_CONFIG = {
+#     'AWS_ACCESS_KEY_ID': 'Key ID',
+#     'AWS_SECRET_ACCESS_KEY': 'Secret',
+#     'AWS_STORAGE_BUCKET_NAME': 'netbox',
+#     'AWS_S3_REGION_NAME': 'eu-west-1',
+# }
+
+# Expose Prometheus monitoring metrics at the HTTP endpoint '/metrics'
+METRICS_ENABLED = False
+
+# Credentials that NetBox will uses to authenticate to devices when connecting via NAPALM.
+NAPALM_USERNAME = ''
+NAPALM_PASSWORD = ''
+
+# NAPALM timeout (in seconds). (Default: 30)
+NAPALM_TIMEOUT = 30
+
+# NAPALM optional arguments (see http://napalm.readthedocs.io/en/latest/support/#optional-arguments). Arguments must
+# be provided as a dictionary.
+NAPALM_ARGS = {}
+
+# Determine how many objects to display per page within a list. (Default: 50)
+PAGINATE_COUNT = 50
+
+# Enable installed plugins. Add the name of each plugin to the list.
+PLUGINS = []
+
+# Plugins configuration settings. These settings are used by various plugins that the user may have installed.
+# Each key in the dictionary is the name of an installed plugin and its value is a dictionary of settings.
+# PLUGINS_CONFIG = {
+#     'my_plugin': {
+#         'foo': 'bar',
+#         'buzz': 'bazz'
+#     }
+# }
+
+# When determining the primary IP address for a device, IPv6 is preferred over IPv4 by default. Set this to True to
+# prefer IPv4 instead.
+PREFER_IPV4 = False
+
+# Rack elevation size defaults, in pixels. For best results, the ratio of width to height should be roughly 10:1.
+RACK_ELEVATION_DEFAULT_UNIT_HEIGHT = 22
+RACK_ELEVATION_DEFAULT_UNIT_WIDTH = 220
+
+# Remote authentication support
+REMOTE_AUTH_ENABLED = False
+REMOTE_AUTH_BACKEND = 'utilities.auth_backends.RemoteUserBackend'
+REMOTE_AUTH_HEADER = 'HTTP_REMOTE_USER'
+REMOTE_AUTH_AUTO_CREATE_USER = True
+REMOTE_AUTH_DEFAULT_GROUPS = []
+REMOTE_AUTH_DEFAULT_PERMISSIONS = []
+
+# This determines how often the GitHub API is called to check the latest release of NetBox. Must be at least 1 hour.
+RELEASE_CHECK_TIMEOUT = 24 * 3600
+
+# This repository is used to check whether there is a new release of NetBox available. Set to None to disable the
+# version check or use the URL below to check for release in the official NetBox repository.
+RELEASE_CHECK_URL = None
+# RELEASE_CHECK_URL = 'https://api.github.com/repos/netbox-community/netbox/releases'
+
+# The file path where custom reports will be stored. A trailing slash is not needed. Note that the default value of
+# this setting is derived from the installed location.
+# REPORTS_ROOT = '/opt/netbox/netbox/reports'
+
+# The file path where custom scripts will be stored. A trailing slash is not needed. Note that the default value of
+# this setting is derived from the installed location.
+# SCRIPTS_ROOT = '/opt/netbox/netbox/scripts'
+
+# By default, NetBox will store session data in the database. Alternatively, a file path can be specified here to use
+# local file storage instead. (This can be useful for enabling authentication on a standby instance with read-only
+# database access.) Note that the user as which NetBox runs must have read and write permissions to this path.
+SESSION_FILE_PATH = None
+
+# Time zone (default: UTC)
+TIME_ZONE = 'UTC'
+
+# Date/time formatting. See the following link for supported formats:
+# https://docs.djangoproject.com/en/stable/ref/templates/builtins/#date
+DATE_FORMAT = 'N j, Y'
+SHORT_DATE_FORMAT = 'Y-m-d'
+TIME_FORMAT = 'g:i a'
+SHORT_TIME_FORMAT = 'H:i:s'
+DATETIME_FORMAT = 'N j, Y g:i a'
+SHORT_DATETIME_FORMAT = 'Y-m-d H:i'
+EOF

type/__netbox/files/gunicorn.py

@@ -0,0 +1,16 @@
+# The IP address (typically localhost) and port that the Netbox WSGI process should listen on
+bind = '127.0.0.1:8001'
+
+# Number of gunicorn workers to spawn. This should typically be 2n+1, where
+# n is the number of CPU cores present.
+workers = 3
+
+# Number of threads per worker process
+threads = 3
+
+# Timeout (in seconds) for a request to complete
+timeout = 120
+
+# The maximum number of requests a worker can handle before being respawned
+max_requests = 5000
+max_requests_jitter = 500

type/__netbox/files/netbox-rq.service

@@ -0,0 +1,21 @@
+[Unit]
+Description=NetBox Request Queue Worker
+Documentation=https://netbox.readthedocs.io/en/stable/
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Type=simple
+
+User=netbox
+Group=netbox
+WorkingDirectory=/opt/netbox
+
+ExecStart=/opt/netbox/venv/bin/python3 /opt/netbox/netbox/manage.py rqworker
+
+Restart=on-failure
+RestartSec=30
+PrivateTmp=true
+
+[Install]
+WantedBy=multi-user.target

type/__netbox/files/netbox.service

@@ -0,0 +1,22 @@
+[Unit]
+Description=NetBox WSGI Service
+Documentation=https://netbox.readthedocs.io/en/stable/
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Type=simple
+
+User=netbox
+Group=netbox
+PIDFile=/var/tmp/netbox.pid
+WorkingDirectory=/opt/netbox
+
+ExecStart=/opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
+
+Restart=on-failure
+RestartSec=30
+PrivateTmp=true
+
+[Install]
+WantedBy=multi-user.target

type/__netbox/gencode-remote

@@ -0,0 +1,58 @@
+#!/bin/sh
+
+VERSION=$(cat "$__object/parameter/version")
+
+src="netbox-$VERSION"
+archive="v$VERSION.tar.gz"
+url="https://github.com/netbox-community/netbox/archive/$archive"
+install_dir=/opt/netbox/netbox
+
+cat << EOF
+set -e
+
+# Ensure that coreutils is installed.
+if [ ! -x \$(which mktemp) ]; then
+  echo "mktemp is not available on the remote host." >&2
+  exit 1
+fi
+
+# Create temporary working directory.
+tmpdir=\$(mktemp -d)
+cd "\$tmpdir"
+
+# Download and extract sources.
+curl -L '$url' > '$archive'
+tar xf '$archive'
+
+# Save cdist-upload configuration file.
+mkdir -p "\$tmpdir"
+cp '$install_dir/cdist/configuration.py' "\$tmpdir/configuration.py"
+
+# Deploy sources and restore configuration.
+rm -r '$install_dir'
+cp -r '$src/netbox' '$install_dir'
+cp \$tmpdir/configuration.py '$install_dir/netbox/configuration.py'
+
+# Setup & enter python virtualenv.
+virtualenv /opt/netbox/venv
+
+# Install python dependencies.
+/opt/netbox/venv/bin/pip3 install -r "\$tmpdir/$src/requirements.txt"
+
+# Set final permissions.
+chown -R netbox /opt/netbox
+
+# Run database migrations.
+sudo -u netbox /opt/netbox/venv/bin/python3 /opt/netbox/netbox/manage.py migrate
+
+# Generate static assets.
+sudo -u netbox /opt/netbox/venv/bin/python3 /opt/netbox/netbox/manage.py collectstatic --no-input
+
+# Remove temporary working directory.
+cd /
+rm -r "\$tmpdir"
+
+# Restart services.
+service netbox restart
+service netbox-rq restart
+EOF

type/__netbox/manifest

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+os=$(cat "$__global/explorer/os")
+
+case "$os" in
+	debian|ubuntu)
+		# Install netbox dependencies.
+		for pkg in python3-pip python3-venv python3-dev build-essential libxml2-dev \
+			libxslt1-dev libffi-dev libpq-dev libssl-dev zlib1g-dev curl virtualenv; do
+			__package $pkg
+		done
+
+		;;
+	*)
+		printf "Your operating system (%s) is currently not supported by this type (%s)\n" "$os" "${__type##*/}" >&2
+		printf "Please contribute an implementation for it if you can.\n" >&2
+		exit 1
+		;;
+esac
+
+export DATABASE_NAME=$(cat "$__object/parameter/database")
+export DATABASE_PASSWORD=$(cat "$__object/parameter/database-password")
+export ALLOWED_HOST=$(cat "$__object/parameter/host")
+export SECRET_KEY=$(cat "$__object/parameter/secret-key")
+
+# Create system user used to run netbox.
+__user netbox --system --home /opt/netbox --create-home
+
+# Generate and upload netbox configuration.
+mkdir -p "$__object/files"
+"$__type/files/configuration.py.sh" > "$__object/files/configuration.py"
+
+require="__user/netbox" __directory /opt/netbox/netbox/cdist --parents
+require="__directory/opt/netbox/netbox/cdist " __file \
+	/opt/netbox/netbox/cdist/configuration.py --mode 640 --owner netbox \
+	--source "$__object/files/configuration.py"
+
+# Upload systemd units and gunicorn configuration.
+for unit in netbox netbox-rq; do
+	__file /etc/systemd/system/$unit.service \
+		--mode 644 --source "$__type/files/$unit.service" \
+		--onchange 'systemctl daemon-reload'
+done
+
+# Python worker configuration.
+require="__user/netbox" __file /opt/netbox/gunicorn.py \
+	--mode 644 --source "$__type/files/gunicorn.py"

type/__netbox/parameter/required

@@ -0,0 +1,5 @@
+version
+database
+database-password
+secret-key
+host