type/__bird_bgp/manifest

@@ -89,6 +89,7 @@ ipv4_import=
 if [ -f "${__object:?}"/parameter/ipv4-import ];
 then
 	ipv4_import="$(cat "${__object:?}"/parameter/ipv4-import)"
+	echo "FOO" >&2
 fi
 export ipv4_import
 

type/__bird_radv/man.rst

@@ -15,17 +15,12 @@ autoconfigure IPv6 hosts, this type is a rudimentary implementation to generate
 configuration for Bird to do so.
 
 
-REQUIRED PARAMETERS
--------------------
+REQUIRED MULTIPLE PARAMETERS
+----------------------------
 interface
   The interfaces to activate the protocol on. RAs will be sent using the
   prefixes configured on these interfaces.
 
-OPTIONAL PARAMETERS
--------------------
-mtu
-  An optional MTU setting to include in the router advertisements.
-
 
 OPTIONAL MULTIPLE PARAMETERS
 ----------------------------
@@ -46,7 +41,6 @@ EXAMPLES
 
     __bird_radv datacenter \
         --interface eth1 \
-        --mtu 9000 \
         --route ::/0 \
         --ns 2001:DB8:cafe::4 \
         --ns 2001:DB8:cafe::14 \

type/__bird_radv/manifest

@@ -55,12 +55,6 @@ then
 	DNSSL=$(sed -e 's/^/\tdnssl "/' -e 's/$/";/' "${__object:?}/parameter/dnssl")
 fi
 
-MTU=
-if [ -f "${__object:?}/parameter/mtu" ];
-then
-	MTU=$(cat "${__object:?}/parameter/mtu")
-fi
-
 __file "${confdir:?}/radv-${__object_id:?}.conf" \
 	--mode 0640 --owner root --group bird \
 	--source - << EOF
@@ -77,9 +71,7 @@ protocol radv ${__object_id:?} {
 	propagate routes ${have_routes:?};
 	ipv6 { table radv_routes; export all; };
 
-	interface "$(cat "${__object:?}/parameter/interface")" {
-	$MTU
-	};
+$(sed -e 's/^/\tinterface "/' -e 's/$/";/' "${__object:?}/parameter/interface")
 
 $RDNS
 

type/__bird_radv/parameter/optional

@@ -1 +0,0 @@
-mtu

type/__systemd_network/gencode-remote

@@ -1,20 +0,0 @@
-#!/bin/sh -e
-#
-# 2022 Joachim Desroches (joachim.desroches@epfl.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-
-systemctl enable systemd-networkd

type/__systemd_network/man.rst

@@ -1,68 +0,0 @@
-cdist-type__systemd-network(7)
-==============================
-
-NAME
-----
-cdist-type__systemd-network - Configure systemd.network(5) file.
-
-
-DESCRIPTION
------------
-
-This type allows you to configure network interfaces by generating a
-systemd.network(5) file. It will enable systemd-networkd, so be sure to remove
-any conflicting network configuration tool if appropriate!
-
-Note that the systemd.network(5) system is very complete, and this type does
-not aim at providing every possible option. Are currently available only the
-most common options: feel free to add anything you need to this type which
-hopefully will grow over time.
-
-
-REQUIRED PARAMETERS
--------------------
-None.
-
-
-OPTIONAL PARAMETERS
--------------------
-description
-  A text field used when displaying details about this network.
-
-OPTIONAL MULTIPLE PARAMETERS
-----------------------------
-match-name
-  A text field that will be set in the `Name` option of the `[Match]` section.
-
-
-BOOLEAN PARAMETERS
-------------------
-ipv6ra-usedomains
-  Set the `UseDomains` option of the `[IPv6AcceptRA]` section to `True`.
-
-
-EXAMPLES
---------
-
-.. code-block:: sh
-
-    # TODO
-    __systemd-network
-
-
-SEE ALSO
---------
-`cdist-type_systemd-resolved`\ (7)
-`systemd.network`\ (5)
-
-AUTHORS
--------
-Joachim Desroches <joachim.desroches@epfl.ch>
-
-
-COPYING
--------
-Copyright \(C) 2022 Joachim Desroches. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.

type/__systemd_network/manifest

@@ -1,84 +0,0 @@
-#!/bin/sh -e
-#
-# 2022 Joachim Desroches (joachim.desroches@epfl.ch)
-#
-# This file is part of cdist.
-#
-# cdist is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# cdist is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with cdist. If not, see <http://www.gnu.org/licenses/>.
-#
-
-os=$(cat "${__global:?}/explorer/os")
-
-case "$os" in
-'debian' | 'ubuntu' | 'archlinux')
-	:
-	;;
-*)
-	printf "Your operating system (%s) is currently not supported by systemd-network\n" "$os" >&2
-	printf "Please contribute an implementation for it if you can.\n" >&2
-	exit 1
-	;;
-esac
-
-# XXX: Please keep the option parsing organized in order per-section, with
-# sections in the same order as they are in the manpage. This will make hacking
-# and maintaining this type much easier.
-
-output_file="${__object:?}/files/${__object_id:?}.network"
-
-cat << EOF > "$output_file"
-# This file is managed by cdist. Do not edit by hand!
-EOF
-
-# Match section
-# Ensure section is needed, OR existence of optional params.
-if [ -f "${__object:?}/parameter/match-name" ];
-then
-	printf "\n[Match]\n" >> "$output_file"
-
-	if [ -f "${__object:?}/parameter/match-name" ];
-	then
-		sed -e 's/^/Name=/' \
-			"${__object:?}/parameter/match-name" >> "$output_file"
-	fi
-fi
-
-# Network section
-# Ensure section is needed, OR existence of optional params.
-if [ -f "${__object:?}/parameter/description" ];
-then
-	printf "\n[Network]\n" >> "$output_file"
-
-	if [ -f "${__object:?}/parameter/description" ];
-	then
-		sed -e 's/^/Description=/' \
-			"${__object:?}/parameter/description" >> "$output_file"
-	fi
-fi
-
-# IPv6AcceptRA section
-# Ensure section is needed, OR existence of optional params.
-if [ -f "${__object:?}/parameter/ipv6ra-usedomains" ];
-then
-	printf "\n[IPv6AcceptRA]\n" >> "$output_file"
-
-	if [ -f "${__object:?}/parameter/ipv6ra-usedomains" ];
-	then
-		printf "UseDomains=True\n" >> "$output_file"
-	fi
-	
-fi
-
-__file "/etc/systemd/network/${__object_id:?}.network" \
-	--source "$output_file"

type/__systemd_network/parameter/boolean

@@ -1 +0,0 @@
-ipv6ra-usedomains

type/__systemd_network/parameter/optional

@@ -1 +0,0 @@
-description

type/__systemd_network/parameter/optional_multiple

@@ -1 +0,0 @@
-match-name