lorawan/sodaq_one/sodaq_one.ino

#include <Arduino.h>
#include <Wire.h>
#include <math.h>
#include "nsarduino.h"

#define debugSerial SerialUSB

void signal_loop_start()
{
    blink(30); delay(50);
    blink(30); delay(50);
    blink(30); delay(50);
}

#define TEMP_PIN 2
#define LOUDNESS_PIN 0
#define BUZZER_PIN 2
#define WATER_SENSOR_PIN 6

int cnt;

void setup() {
    while ((!SerialUSB) && (millis() < 10000)){
        // Wait 10 seconds for the Serial Monitor
    }

    /* Enable the pins 2/3, 6/7 and 8/9 */
    pinMode(11, OUTPUT);
    digitalWrite(11, HIGH);

    setupLED();

    // setupWater(WATER_SENSOR_PIN);
    // setupBuzzer(BUZZER_PIN);

    gpsSetup();

    // setupBuzzer();

    // setupCompass();
//    setupSunLight();
    loraSetup();

    cnt = 0;
}

String tmps;
float tmp;

#define SLEEPTIME 10000

#define LOUDNESS_AVG 60
int loudnesses[LOUDNESS_AVG];

void loop() {
    signal_loop_start();

    /* if(hasWater(WATER_SENSOR_PIN)) { */
    /*     debugSerial.println("Having water"); */
    /*     loraSend(getWater(WATER_SENSOR_PIN)); */
    /*     buzz(BUZZER_PIN, 5000); */
    /* } else { */
    /*     loraSend(getWater(WATER_SENSOR_PIN)); */
    /*     debugSerial.println("it's dry"); */
    /* } */


//    loraSend(getSunLight());
    // loraSend(getTempHumidHDC1000());
    // loraSend(getCompass());


    if((tmps = gpsGetPostion(120)) != "") {
        loraSend(tmps);
    }

    sendIntAsString("battery=", getBatteryVoltage());


    /* if(cnt < LOUDNESS_AVG) { */
    /*     loudnesses[cnt] = readLoudness(LOUDNESS_PIN); */
    /*     debugSerial.println("temploudness=" + String(loudnesses[cnt])); */
    /*     cnt++; */
    /* } else { */
    /*     tmp = 0; */
    /*     for(cnt = 0; cnt < LOUDNESS_AVG; cnt++) { */
    /*         tmp += loudnesses[cnt]; */
    /*     } */
    /*     tmp = tmp / (float) (cnt+1); */

    /*     sendIntAsString("battery=", getBatteryVoltage()); */
    /*     sendFloatAsString("loudness=", tmp); */
    /*     sendFloatAsString("temperature=", getTemperature(TEMP_PIN)); */
    /*     cnt = 0; */
    /* } */


    delay(SLEEPTIME);
}


/* Node = 2
48
48
48
52
65
51
48
66

hex: 3030303441333042
*/

/* temp / humidity code (not functional)

/* humid / temperature */
/*


*/