Cleanup

sodaq_one/gps.ino

@@ -0,0 +1,41 @@
+#include <Arduino.h>
+#include <Sodaq_UBlox_GPS.h>
+
+void gpsSetup() { sodaq_gps.init(GPS_ENABLE); }
+
+/*!
+ * Find a GPS fix, but first wait a while
+ */
+String gpsGetPostion(long waittime)
+{
+    String res;
+    uint32_t timeout = waittime * 1000;
+
+    debugSerial.println(String("waiting for fix ..., timeout=") + timeout + String("ms"));
+
+    uint32_t start = millis();
+
+    if (sodaq_gps.scan(false, timeout)) {
+        debugSerial.println(String(" time to find fix: ") + (millis() - start) + String("ms"));
+        debugSerial.println(String(" datetime = ") + sodaq_gps.getDateTimeString());
+
+        res = String("lat=") + String(sodaq_gps.getLat(), 7) + " " + String("lon=") + String(sodaq_gps.getLon(), 7) + " " + String("sats=") + String(sodaq_gps.getNumberOfSatellites());
+
+        debugSerial.println(res);
+    } else {
+        debugSerial.println("GPS: No Fix");
+        return "";
+    }
+    return res;
+}
+
+String gpsGetDateTime(long waittime) {
+    String res = "";
+    uint32_t timeout = waittime * 1000;
+    if (sodaq_gps.scan(false, timeout)) {
+        res= String("datetime =") + sodaq_gps.getDateTimeString();
+        debugSerial.println(res);
+    }
+
+    return res;
+}

sodaq_one/ledcolours.ino

@@ -54,3 +54,9 @@ void blink(int length) {
     delay(length);
     CLEAR();
 }
+
+void setupLED() {
+    pinMode(LED_RED, OUTPUT);
+    pinMode(LED_GREEN, OUTPUT);
+    pinMode(LED_BLUE, OUTPUT);
+}

sodaq_one/loudness.ino

@@ -0,0 +1,6 @@
+#include <Arduino.h>
+
+int readLoudness()
+{
+	return analogRead(LOUDNESS_SENSOR);
+}

sodaq_one/nsarduino.h

@@ -11,6 +11,13 @@ void buzz(int ms);
 /* compass.ino */
 extern char compassReport[80];
 
+/* ledcolours.ino */
+void setupLED();
+
+/* loudness.ino */
+int readLoudness();
+
+
 /* lora.ino */
 void setupLoRa();
 void sendPacket(String packet);

sodaq_one/sodaq_one.ino

@@ -0,0 +1,112 @@
+#include <Arduino.h>
+#include <Wire.h>
+
+#include "nsarduino.h"
+
+#define debugSerial SerialUSB
+
+#define deviceNo 2
+
+#define LOUDNESS_SENSOR 0
+#define USE_LOUDNESS 1
+#define BUZZER_PIN 2
+
+void sendBatVoltage() {
+  String battery = String("bat1=") + String(getBatteryVoltage());
+  sendPacket(battery);
+}
+
+void signal_loop_start()
+{
+    blink(30); delay(50);
+    blink(30); delay(50);
+    blink(30); delay(50);
+}
+
+void signal_loop_end()
+{
+    blink(1000); delay(29000);
+}
+
+void setup() {
+    while ((!SerialUSB) && (millis() < 10000)){
+        // Wait 10 seconds for the Serial Monitor
+    }
+
+    /* Enable the pins 2/3, 6/7 and 8/9 */
+    pinMode(11, OUTPUT);
+    digitalWrite(11, HIGH);
+
+    setupLED();
+    gpsSetup();
+    setupBuzzer();
+    setupCompass();
+    setupSunLight();
+    loraSetup();
+}
+
+
+void sendIntAsString(String prefix, int value) {
+    String tmp = prefix + String(value);
+    debugSerial.println(tmp);
+    loraSend(tmp);
+}
+
+String tmps;
+int tmpi;
+
+void loop() {
+    signal_loop_start();
+
+    loraSend(String("node=")  + String(deviceNo));
+    sendIntAsString("battery=", getBatteryVoltage());
+    sendIntAsString("loudness=", readLoudness());
+
+    tmps = getSunLight();
+    debugSerial.println(tmps);
+    loraSend(tmps);
+
+    readCompass();
+    debugSerial.println(compassReport);
+
+    // buzz(30);
+
+    /* if((tmps = gpsGetPostion(120)) != "") { */
+    /*     loraSend(tmps); */
+    /* } */
+
+    signal_loop_end();
+}
+
+
+/* Node = 2
+48
+48
+48
+52
+65
+51
+48
+66
+
+hex: 3030303441333042
+*/
+
+/* temp / humidity code (not functional)
+
+/* humid / temperature */
+/*
+#include <HDC1000.h>
+
+HDC1000 hdc;
+
+float temperature;
+float humidity;
+
+
+*/
+
+//    temperature = hdc.getTemperature();
+//    humidity =  hdc.getHumidity();
+//    String msg_tmphumid = String("tmp=") + temperature + String(" humid=") + humidity;
+//    debugSerial.println(msg_tmphumid);

sodaq_one_gps/sodaq_one_gps.ino

@@ -1,220 +0,0 @@
-#include <Arduino.h>
-#include <Sodaq_UBlox_GPS.h>
-
-#include "Sodaq_RN2483.h"
-
-#define debugSerial SerialUSB
-#define loraSerial Serial1
-
-/* The number of the device: 1,2,3,4 */
-#define deviceNo 2
-
-#define beePin ENABLE_PIN_IO
-
-void sendPacket(String packet);
-
-void BLUE() {
-    digitalWrite(LED_RED, HIGH);
-    digitalWrite(LED_GREEN, HIGH);
-    digitalWrite(LED_BLUE, LOW);
-}
-
-void RED() {
-    digitalWrite(LED_RED, LOW);
-    digitalWrite(LED_GREEN, HIGH);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void YELLOW() {
-    digitalWrite(LED_RED, LOW);
-    digitalWrite(LED_GREEN, LOW);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void WHITE() {
-    digitalWrite(LED_RED, LOW);
-    digitalWrite(LED_GREEN, LOW);
-    digitalWrite(LED_BLUE, LOW);
-}
-
-
-void GREEN() {
-    digitalWrite(LED_RED, HIGH);
-    digitalWrite(LED_GREEN, LOW);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void CLEAR() {
-    digitalWrite(LED_RED, HIGH);
-    digitalWrite(LED_GREEN, HIGH);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void blink(int length) {
-    switch(deviceNo) {
-    case 1:
-        BLUE();
-        break;
-    case 2:
-        WHITE();
-        break;
-    case 3:
-        GREEN();
-        break;
-    case 4:
-        RED();
-        break;
-    }
-    delay(length);
-    CLEAR();
-}
-
-
-void setupLED() {
-    pinMode(LED_RED, OUTPUT);
-    pinMode(LED_GREEN, OUTPUT);
-    pinMode(LED_BLUE, OUTPUT);
-}
-
-void setupGPS()
-    {
-        sodaq_gps.init(GPS_ENABLE);
-    }
-
-/*!
- * Find a GPS fix, but first wait a while
- */
-void send_gps()
-{
-    /* Delay and light up */
-    blink(10000);
-
-    uint32_t start = millis();
-    uint32_t timeout = 900L * 1000;
-    debugSerial.println(String("waiting for fix ..., timeout=") + timeout + String("ms"));
-
-    if (sodaq_gps.scan(false, timeout)) {
-        debugSerial.println(String(" time to find fix: ") + (millis() - start) + String("ms"));
-        debugSerial.println(String(" datetime = ") + sodaq_gps.getDateTimeString());
-
-        String lat= String("lat=") + String(sodaq_gps.getLat(), 7);
-        debugSerial.println(lat);
-        sendPacket(lat);
-
-        String lon = String("lon=") + String(sodaq_gps.getLon(), 7);
-        debugSerial.println(lon);
-        sendPacket(lon);
-
-        String sats = String("num sats = ") + String(sodaq_gps.getNumberOfSatellites());
-        debugSerial.println(sats);
-        sendPacket(sats);
-    } else {
-        debugSerial.println("No Fix");
-        sendPacket("No Fix");
-    }
-}
-
-
-// OTAA
-// Random numbers chosen + device id
-uint8_t DevEUI[8] = { 0x9c, 0xd9, 0x0b, 0xb5, 0x2b, 0x6a, 0x1d, deviceNo };
-uint8_t AppEUI[8] = { 0xd4, 0x16, 0xcd, 0x0b, 0x7b, 0xcf, 0x2d, 0x5c };
-uint8_t AppKey[16] = { 0xa9, 0xbc, 0x8b, 0x6a, 0x81, 0x75, 0xf6, 0x33, 0xe0, 0xd6, 0x64, 0xd9, 0x2b, 0xcb, 0x13, 0x78 };
-
-
-void setupLoRaOTAA(){
-    if (LoRaBee.initOTA(loraSerial, DevEUI, AppEUI, AppKey, true))
-    {
-        debugSerial.println("Communication to LoRaBEE successful.");
-    }
-    else
-    {
-        debugSerial.println("OTAA Setup failed!");
-    }
-}
-
-
-void setup() {
-    //Power up the LoRaBEE - on loraone/sodaq one
-    pinMode(ENABLE_PIN_IO, OUTPUT); // ONE
-    digitalWrite(beePin, HIGH); // ONE
-    delay(3000);
-
-    while ((!SerialUSB) && (millis() < 10000)){
-        // Wait 10 seconds for the Serial Monitor
-    }
-
-    //Set baud rate
-    debugSerial.begin(57600);
-    loraSerial.begin(LoRaBee.getDefaultBaudRate());
-
-    setupGPS();
-    blink(30);
-    blink(30);
-
-    setupLED();
-    blink(60);
-
-    //connect to the LoRa Network
-    setupLoRa();
-}
-
-void setupLoRa()
-{
-    setupLoRaOTAA();
-}
-
-void sendPacket(String packet){
-    switch (LoRaBee.sendReqAck(1, (uint8_t*)packet.c_str(), packet.length(), 8))
-    {
-    case NoError:
-        debugSerial.println("Successful transmission.");
-        break;
-    case NoResponse:
-        debugSerial.println("There was no response from the device.");
-        setupLoRa();
-        break;
-    case Timeout:
-        debugSerial.println("Connection timed-out. Check your serial connection to the device! Sleeping for 20sec.");
-        delay(20000);
-        break;
-    case PayloadSizeError:
-        debugSerial.println("The size of the payload is greater than allowed. Transmission failed!");
-        break;
-    case InternalError:
-        debugSerial.println("Oh No! This shouldn't happen. Something is really wrong! Try restarting the device!\r\nThe network connection will reset.");
-        setupLoRa();
-        break;
-    case Busy:
-        debugSerial.println("The device is busy. Sleeping for 10 extra seconds.");
-        delay(10000);
-        break;
-    case NetworkFatalError:
-        debugSerial.println("There is a non-recoverable error with the network connection. You should re-connect.\r\nThe network connection will reset.");
-        setupLoRa();
-        break;
-    case NotConnected:
-        debugSerial.println("The device is not connected to the network. Please connect to the network before attempting to send data.\r\nThe network connection will reset.");
-        setupLoRa();
-        break;
-    case NoAcknowledgment:
-        debugSerial.println("There was no acknowledgment sent back!");
-        // When you this message you are probaly out of range of the network.
-        break;
-    default:
-        break;
-    }
-}
-
-void loop() {
-    /* Announce begin of code */
-    blink(20); delay(50);
-    blink(20); delay(50);
-    blink(20); delay(50);
-
-    sendPacket("GPS node");
-    blink(1000); delay(29000);
-
-    /* Wait one minute for finding fix */
-    send_gps();
-}

sodaq_one_gps_battery/Sodaq_RN2483.cpp

@@ -1 +0,0 @@
-../Sodaq_RN2483.cpp

sodaq_one_gps_battery/Sodaq_RN2483.h

@@ -1 +0,0 @@
-../Sodaq_RN2483.h

sodaq_one_gps_battery/StringLiterals.h

@@ -1 +0,0 @@
-../StringLiterals.h

sodaq_one_gps_battery/Switchable_Device.cpp

@@ -1 +0,0 @@
-../Switchable_Device.cpp

sodaq_one_gps_battery/Switchable_Device.h

@@ -1 +0,0 @@
-../Switchable_Device.h

sodaq_one_gps_battery/Utils.h

@@ -1 +0,0 @@
-../Utils.h

sodaq_one_gps_battery/sodaq_one_gps_battery.ino

@@ -1,253 +0,0 @@
-#include <Arduino.h>
-#include <Sodaq_UBlox_GPS.h>
-
-#include "Sodaq_RN2483.h"
-
-#define debugSerial SerialUSB
-#define loraSerial Serial1
-
-/* The number of the device: 1,2,3,4 */
-#define deviceNo 1
-
-#define beePin ENABLE_PIN_IO
-
-void sendPacket(String packet);
-
-void BLUE() {
-    digitalWrite(LED_RED, HIGH);
-    digitalWrite(LED_GREEN, HIGH);
-    digitalWrite(LED_BLUE, LOW);
-}
-
-void RED() {
-    digitalWrite(LED_RED, LOW);
-    digitalWrite(LED_GREEN, HIGH);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void YELLOW() {
-    digitalWrite(LED_RED, LOW);
-    digitalWrite(LED_GREEN, LOW);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void WHITE() {
-    digitalWrite(LED_RED, LOW);
-    digitalWrite(LED_GREEN, LOW);
-    digitalWrite(LED_BLUE, LOW);
-}
-
-
-void GREEN() {
-    digitalWrite(LED_RED, HIGH);
-    digitalWrite(LED_GREEN, LOW);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void CLEAR() {
-    digitalWrite(LED_RED, HIGH);
-    digitalWrite(LED_GREEN, HIGH);
-    digitalWrite(LED_BLUE, HIGH);
-}
-
-void blink(int length) {
-    switch(deviceNo) {
-    case 1:
-        BLUE();
-        break;
-    case 2:
-        WHITE();
-        break;
-    case 3:
-        GREEN();
-        break;
-    case 4:
-        RED();
-        break;
-    }
-    delay(length);
-    CLEAR();
-}
-
-#define ADC_AREF 3.3f
-#define BATVOLT_R1 2.0f
-#define BATVOLT_R2 2.0f
-#define BATVOLT_PIN BAT_VOLT
-
-uint16_t getBatteryVoltage()
-{
-    uint16_t voltage = (uint16_t)((ADC_AREF / 1.023) * (BATVOLT_R1 + BATVOLT_R2) / BATVOLT_R2 * (float)analogRead(BATVOLT_PIN));
-
-    return voltage;
-}
-
-
-void sendBatVoltage() {
-  String battery = String("bat1=") + String(getBatteryVoltage());
-  sendPacket(battery);
-}
-
-
-void setupLED() {
-    pinMode(LED_RED, OUTPUT);
-    pinMode(LED_GREEN, OUTPUT);
-    pinMode(LED_BLUE, OUTPUT);
-}
-
-void setupGPS()
-    {
-        sodaq_gps.init(GPS_ENABLE);
-    }
-
-/*!
- * Find a GPS fix, but first wait a while
- */
-void send_gps()
-{
-    /* Delay and light up */
-    blink(10000);
-
-    uint32_t start = millis();
-    uint32_t timeout = 900L * 1000;
-    debugSerial.println(String("waiting for fix ..., timeout=") + timeout + String("ms"));
-
-    if (sodaq_gps.scan(false, timeout)) {
-        debugSerial.println(String(" time to find fix: ") + (millis() - start) + String("ms"));
-        debugSerial.println(String(" datetime = ") + sodaq_gps.getDateTimeString());
-
-        String lat= String("lat=") + String(sodaq_gps.getLat(), 7);
-        debugSerial.println(lat);
-        sendPacket(lat);
-
-        String lon = String("lon=") + String(sodaq_gps.getLon(), 7);
-        debugSerial.println(lon);
-        sendPacket(lon);
-
-        String sats = String("num sats = ") + String(sodaq_gps.getNumberOfSatellites());
-        debugSerial.println(sats);
-        sendPacket(sats);
-    } else {
-        debugSerial.println("No Fix");
-        sendPacket("No Fix");
-    }
-}
-
-
-// OTAA
-// Random numbers chosen + device id
-uint8_t DevEUI[8] = { 0x9c, 0xd9, 0x0b, 0xb5, 0x2b, 0x6a, 0x1d, deviceNo };
-// uint8_t AppEUI[8] = { 0xd4, 0x16, 0xcd, 0x0b, 0x7b, 0xcf, 0x2d, 0x5c };
-// uint8_t AppKey[16] = { 0xa9, 0xbc, 0x8b, 0x6a, 0x81, 0x75, 0xf6, 0x33, 0xe0, 0xd6, 0x64, 0xd9, 0x2b, 0xcb, 0x13, 0x78 };
-
-// ttn
-uint8_t AppEUI[8] = { 0x70, 0xB3, 0xD5, 0x7E, 0xD0, 0x00, 0x0E, 0x9B
-};
-
-// id=2
-// uint8_t AppKey[16] = { 0xE4, 0xAC, 0x4D, 0xD4, 0xB2, 0xA7,
-// 0x84,0xB8, 0x9D, 0xC9, 0x4C, 0x37, 0xD9, 0x0E, 0x22, 0x45 };
-
-// id=1
-uint8_t AppKey[16] = { 0x27, 0x29, 0xCC, 0x46, 0xAD, 0xFA, 0xFA, 0x95, 0xA1, 0x8A, 0xA1, 0x21, 0x57, 0x21, 0x23, 0x6E };
-
-
-void setupLoRaOTAA(){
-    if (LoRaBee.initOTA(loraSerial, DevEUI, AppEUI, AppKey, true))
-    {
-        debugSerial.println("Communication to LoRaBEE successful.");
-    }
-    else
-    {
-        debugSerial.println("OTAA Setup failed!");
-    }
-}
-
-
-void setup() {
-    //Power up the LoRaBEE - on loraone/sodaq one
-    pinMode(ENABLE_PIN_IO, OUTPUT); // ONE
-    digitalWrite(beePin, HIGH); // ONE
-    delay(3000);
-
-    while ((!SerialUSB) && (millis() < 10000)){
-        // Wait 10 seconds for the Serial Monitor
-    }
-
-    //Set baud rate
-    debugSerial.begin(57600);
-    loraSerial.begin(LoRaBee.getDefaultBaudRate());
-
-    setupGPS();
-    blink(30);
-    blink(30);
-
-    setupLED();
-    blink(60);
-
-    //connect to the LoRa Network
-    setupLoRa();
-}
-
-void setupLoRa()
-{
-    setupLoRaOTAA();
-}
-
-void sendPacket(String packet){
-    switch (LoRaBee.sendReqAck(1, (uint8_t*)packet.c_str(), packet.length(), 8))
-    {
-    case NoError:
-        debugSerial.println("Successful transmission.");
-        break;
-    case NoResponse:
-        debugSerial.println("There was no response from the device.");
-        setupLoRa();
-        break;
-    case Timeout:
-        debugSerial.println("Connection timed-out. Check your serial connection to the device! Sleeping for 20sec.");
-        delay(20000);
-        break;
-    case PayloadSizeError:
-        debugSerial.println("The size of the payload is greater than allowed. Transmission failed!");
-        break;
-    case InternalError:
-        debugSerial.println("Oh No! This shouldn't happen. Something is really wrong! Try restarting the device!\r\nThe network connection will reset.");
-        setupLoRa();
-        break;
-    case Busy:
-        debugSerial.println("The device is busy. Sleeping for 10 extra seconds.");
-        delay(10000);
-        break;
-    case NetworkFatalError:
-        debugSerial.println("There is a non-recoverable error with the network connection. You should re-connect.\r\nThe network connection will reset.");
-        setupLoRa();
-        break;
-    case NotConnected:
-        debugSerial.println("The device is not connected to the network. Please connect to the network before attempting to send data.\r\nThe network connection will reset.");
-        setupLoRa();
-        break;
-    case NoAcknowledgment:
-        debugSerial.println("There was no acknowledgment sent back!");
-        // When you this message you are probaly out of range of the network.
-        break;
-    default:
-        break;
-    }
-}
-
-void loop() {
-    /* Announce begin of code */
-    blink(20); delay(50);
-    blink(20); delay(50);
-    blink(20); delay(50);
-
-    String id = String("GPS node ")  + String(deviceNo);
-    sendPacket(id);
-    sendBatVoltage();
-
-    /* Wait for 30s to send again */
-    blink(1000); delay(29000);
-
-    /* Wait one minute for finding fix */
-    send_gps();
-}

sodaq_one_gps_battery_loudness/Sodaq_RN2483.cpp

@@ -1 +0,0 @@
-../Sodaq_RN2483.cpp

sodaq_one_gps_battery_loudness/Sodaq_RN2483.h

@@ -1 +0,0 @@
-../Sodaq_RN2483.h

sodaq_one_gps_battery_loudness/StringLiterals.h

@@ -1 +0,0 @@
-../StringLiterals.h

sodaq_one_gps_battery_loudness/Switchable_Device.cpp

@@ -1 +0,0 @@
-../Switchable_Device.cpp

sodaq_one_gps_battery_loudness/Switchable_Device.h

@@ -1 +0,0 @@
-../Switchable_Device.h

sodaq_one_gps_battery_loudness/Utils.h

@@ -1 +0,0 @@
-../Utils.h

sodaq_one_gps_battery_loudness/sodaq_one_gps_battery_loudness.ino

@@ -1,189 +0,0 @@
-#include <Arduino.h>
-#include <Wire.h>
-#include <Sodaq_UBlox_GPS.h>
-
-
-#include "nsarduino.h"
-
-#define debugSerial SerialUSB
-
-/* The number of the device: 1,2,3,4 */
-#define deviceNo 2
-
-#define LOUDNESS_SENSOR 0
-#define USE_LOUDNESS 1
-#define BUZZER_PIN 2
-
-String msg_gps;
-int loudness;
-
-int readLoudness()
-{
-	return analogRead(LOUDNESS_SENSOR);
-}
-
-void sendBatVoltage() {
-  String battery = String("bat1=") + String(getBatteryVoltage());
-  sendPacket(battery);
-}
-
-void setupLED() {
-    pinMode(LED_RED, OUTPUT);
-    pinMode(LED_GREEN, OUTPUT);
-    pinMode(LED_BLUE, OUTPUT);
-}
-
-void setup_gps() { sodaq_gps.init(GPS_ENABLE); }
-
-/*!
- * Find a GPS fix, but first wait a while
- */
-boolean get_gps(long waittime)
-{
-    uint32_t timeout = waittime * 1000;
-
-    debugSerial.println(String("waiting for fix ..., timeout=") + timeout + String("ms"));
-    blink(5000);
-
-    uint32_t start = millis();
-
-    if (sodaq_gps.scan(false, timeout)) {
-        debugSerial.println(String(" time to find fix: ") + (millis() - start) + String("ms"));
-        debugSerial.println(String(" datetime = ") + sodaq_gps.getDateTimeString());
-
-
-        msg_gps = String("lat=") + String(sodaq_gps.getLat(), 7) + " " + String("lon=") + String(sodaq_gps.getLon(), 7) + " " + String("sats=") + String(sodaq_gps.getNumberOfSatellites());
-
-        /* String lat= String("lat=") + String(sodaq_gps.getLat(), 7); */
-        /* debugSerial.println(lat); */
-        /* msg_gps = lat; */
-
-        /* String lon = String("lon=") + String(sodaq_gps.getLon(), 7); */
-        /* debugSerial.println(lon); */
-        /* msg_gps += " " + lon; */
-
-        /* String sats = String("sats=") + String(sodaq_gps.getNumberOfSatellites()); */
-
-        /* msg_gps += " " + sats; */
-
-        debugSerial.println(msg_gps);
-    } else {
-        debugSerial.println("GPS: No Fix");
-        return false;
-    }
-    return true;
-}
-
-/*
-*  1 Sodaq
-*  2 sodaq
-*  3 sodaq
-*  4 rpi
-*/
-// 9cd90bb52b6a1d
-
-void signal_loop_start()
-{
-    blink(30); delay(50);
-    blink(30); delay(50);
-    blink(30); delay(50);
-}
-
-void signal_loop_end()
-{
-    /* Wait for 30s to send again */
-    blink(1000); delay(29000);
-}
-
-void setup() {
-    while ((!SerialUSB) && (millis() < 10000)){
-        // Wait 10 seconds for the Serial Monitor
-    }
-
-    /* Enable the pins 2/3, 6/7 and 8/9 */
-    pinMode(11, OUTPUT);
-    digitalWrite(11, HIGH);
-
-    setupLED();
-
-    setup_gps();
-
-    setupBuzzer();
-    setupCompass();
-
-
-    blink(60);
-
-    setupSunLight();
-
-    loraSetup();
-}
-
-int mybyte;
-int i;
-
-String tmp;
-
-void loop() {
-    signal_loop_start();
-
-    /* String msg_id = String("node=")  + String(deviceNo); */
-    /* sendPacket(msg_id); */
-
-    /* sendBatVoltage(); */
-    // sendLight();
-
-    /* loudness = readLoudness(); */
-    /* String msg_loudness = "loudness=" + String(loudness); */
-    /* debugSerial.println(msg_loudness); */
-
-    tmp = getSunLight();
-    debugSerial.println(tmp);
-    loraSend(tmp);
-
-    readCompass();
-    debugSerial.println(compassReport);
-
-    // buzz(30);
-
-//    sendPacket(msg_loudness);
-
-    /* if(get_gps(60)) { */
-    /*     sendPacket(msg_gps); */
-    /* } */
-
-    signal_loop_end();
-}
-
-
-/* Node = 2
-48
-48
-48
-52
-65
-51
-48
-66
-
-hex: 3030303441333042
-*/
-
-/* temp / humidity code (not functional)
-
-/* humid / temperature */
-/*
-#include <HDC1000.h>
-
-HDC1000 hdc;
-
-float temperature;
-float humidity;
-
-
-*/
-
-//    temperature = hdc.getTemperature();
-//    humidity =  hdc.getHumidity();
-//    String msg_tmphumid = String("tmp=") + temperature + String(" humid=") + humidity;
-//    debugSerial.println(msg_tmphumid);