ungleich-k8s/archive/v3/rook/values.yaml
2021-10-18 15:15:52 +02:00

402 lines
17 KiB
YAML

# Default values for a single rook-ceph cluster
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
# Namespace of the main rook operator
operatorNamespace: rook-ceph
# The metadata.name of the CephCluster CR. The default name is the same as the namespace.
# clusterName: rook-ceph
# Ability to override ceph.conf
# configOverride: |
# [global]
# mon_allow_pool_delete = true
# osd_pool_default_size = 3
# osd_pool_default_min_size = 2
# Installs a debugging toolbox deployment
toolbox:
enabled: true
image: rook/ceph:master
tolerations: []
affinity: {}
monitoring:
# requires Prometheus to be pre-installed
# enabling will also create RBAC rules to allow Operator to create ServiceMonitors
enabled: false
rulesNamespaceOverride:
# imagePullSecrets option allow to pull docker images from private docker registry. Option will be passed to all service accounts.
# imagePullSecrets:
# - name: my-registry-secret
# All values below are taken from the CephCluster CRD
# More information can be found at [Ceph Cluster CRD](/Documentation/ceph-cluster-crd.md)
cephClusterSpec:
cephVersion:
# See tags available at https://hub.docker.com/r/ceph/ceph/tags/.
image: quay.io/ceph/ceph:v16.2.5
# Whether to allow unsupported versions of Ceph. Currently `nautilus` and `octopus` are supported.
# Future versions such as `pacific` would require this to be set to `true`.
# Do not set to true in production.
allowUnsupported: false
dataDirHostPath: /var/lib/rook
# Whether or not upgrade should continue even if a check fails
# This means Ceph's status could be degraded and we don't recommend upgrading but you might decide otherwise
# Use at your OWN risk
# To understand Rook's upgrade process of Ceph, read https://rook.io/docs/rook/master/ceph-upgrade.html#ceph-version-upgrades
skipUpgradeChecks: false
# Whether or not continue if PGs are not clean during an upgrade
continueUpgradeAfterChecksEvenIfNotHealthy: false
# WaitTimeoutForHealthyOSDInMinutes defines the time (in minutes) the operator would wait before an OSD can be stopped for upgrade or restart.
# If the timeout exceeds and OSD is not ok to stop, then the operator would skip upgrade for the current OSD and proceed with the next one
# if `continueUpgradeAfterChecksEvenIfNotHealthy` is `false`. If `continueUpgradeAfterChecksEvenIfNotHealthy` is `true`, then opertor would
# continue with the upgrade of an OSD even if its not ok to stop after the timeout. This timeout won't be applied if `skipUpgradeChecks` is `true`.
# The default wait timeout is 10 minutes.
waitTimeoutForHealthyOSDInMinutes: 10
mon:
# Set the number of mons to be started. Must be an odd number, and is generally recommended to be 3.
count: 3
# The mons should be on unique nodes. For production, at least 3 nodes are recommended for this reason.
# Mons should only be allowed on the same node for test environments where data loss is acceptable.
allowMultiplePerNode: false
mgr:
# When higher availability of the mgr is needed, increase the count to 2.
# In that case, one mgr will be active and one in standby. When Ceph updates which
# mgr is active, Rook will update the mgr services to match the active mgr.
count: 1
modules:
# Several modules should not need to be included in this list. The "dashboard" and "monitoring" modules
# are already enabled by other settings in the cluster CR.
- name: pg_autoscaler
enabled: true
# enable the ceph dashboard for viewing cluster status
dashboard:
enabled: true
# serve the dashboard under a subpath (useful when you are accessing the dashboard via a reverse proxy)
# urlPrefix: /ceph-dashboard
# serve the dashboard at the given port.
# port: 8443
# Network configuration, see: https://github.com/rook/rook/blob/master/Documentation/ceph-cluster-crd.md#network-configuration-settings
network:
ipFamily: "IPv6"
dualStack: false
# enable the crash collector for ceph daemon crash collection
crashCollector:
disable: false
# Uncomment daysToRetain to prune ceph crash entries older than the
# specified number of days.
# daysToRetain: 30
# enable log collector, daemons will log on files and rotate
# logCollector:
# enabled: true
# periodicity: 24h # SUFFIX may be 'h' for hours or 'd' for days.
# automate [data cleanup process](https://github.com/rook/rook/blob/master/Documentation/ceph-teardown.md#delete-the-data-on-hosts) in cluster destruction.
cleanupPolicy:
# Since cluster cleanup is destructive to data, confirmation is required.
# To destroy all Rook data on hosts during uninstall, confirmation must be set to "yes-really-destroy-data".
# This value should only be set when the cluster is about to be deleted. After the confirmation is set,
# Rook will immediately stop configuring the cluster and only wait for the delete command.
# If the empty string is set, Rook will not destroy any data on hosts during uninstall.
confirmation: ""
# sanitizeDisks represents settings for sanitizing OSD disks on cluster deletion
sanitizeDisks:
# method indicates if the entire disk should be sanitized or simply ceph's metadata
# in both case, re-install is possible
# possible choices are 'complete' or 'quick' (default)
method: quick
# dataSource indicate where to get random bytes from to write on the disk
# possible choices are 'zero' (default) or 'random'
# using random sources will consume entropy from the system and will take much more time then the zero source
dataSource: zero
# iteration overwrite N times instead of the default (1)
# takes an integer value
iteration: 1
# allowUninstallWithVolumes defines how the uninstall should be performed
# If set to true, cephCluster deletion does not wait for the PVs to be deleted.
allowUninstallWithVolumes: false
# To control where various services will be scheduled by kubernetes, use the placement configuration sections below.
# The example under 'all' would have all services scheduled on kubernetes nodes labeled with 'role=storage-node' and
# tolerate taints with a key of 'storage-node'.
# placement:
# all:
# nodeAffinity:
# requiredDuringSchedulingIgnoredDuringExecution:
# nodeSelectorTerms:
# - matchExpressions:
# - key: role
# operator: In
# values:
# - storage-node
# podAffinity:
# podAntiAffinity:
# topologySpreadConstraints:
# tolerations:
# - key: storage-node
# operator: Exists
# # The above placement information can also be specified for mon, osd, and mgr components
# mon:
# # Monitor deployments may contain an anti-affinity rule for avoiding monitor
# # collocation on the same node. This is a required rule when host network is used
# # or when AllowMultiplePerNode is false. Otherwise this anti-affinity rule is a
# # preferred rule with weight: 50.
# osd:
# mgr:
# cleanup:
# annotations:
# all:
# mon:
# osd:
# cleanup:
# prepareosd:
# # If no mgr annotations are set, prometheus scrape annotations will be set by default.
# mgr:
# labels:
# all:
# mon:
# osd:
# cleanup:
# mgr:
# prepareosd:
# # monitoring is a list of key-value pairs. It is injected into all the monitoring resources created by operator.
# # These labels can be passed as LabelSelector to Prometheus
# monitoring:
# resources:
# # The requests and limits set here, allow the mgr pod to use half of one CPU core and 1 gigabyte of memory
# mgr:
# limits:
# cpu: "500m"
# memory: "1024Mi"
# requests:
# cpu: "500m"
# memory: "1024Mi"
# # The above example requests/limits can also be added to the other components
# mon:
# osd:
# prepareosd:
# mgr-sidecar:
# crashcollector:
# logcollector:
# cleanup:
# The option to automatically remove OSDs that are out and are safe to destroy.
removeOSDsIfOutAndSafeToRemove: false
# priority classes to apply to ceph resources
# priorityClassNames:
# all: rook-ceph-default-priority-class
# mon: rook-ceph-mon-priority-class
# osd: rook-ceph-osd-priority-class
# mgr: rook-ceph-mgr-priority-class
storage: # cluster level storage configuration and selection
useAllNodes: true
useAllDevices: true
# deviceFilter:
# config:
# crushRoot: "custom-root" # specify a non-default root label for the CRUSH map
# metadataDevice: "md0" # specify a non-rotational storage so ceph-volume will use it as block db device of bluestore.
# databaseSizeMB: "1024" # uncomment if the disks are smaller than 100 GB
# journalSizeMB: "1024" # uncomment if the disks are 20 GB or smaller
# osdsPerDevice: "1" # this value can be overridden at the node or device level
# encryptedDevice: "true" # the default value for this option is "false"
# # Individual nodes and their config can be specified as well, but 'useAllNodes' above must be set to false. Then, only the named
# # nodes below will be used as storage resources. Each node's 'name' field should match their 'kubernetes.io/hostname' label.
# nodes:
# - name: "172.17.4.201"
# devices: # specific devices to use for storage can be specified for each node
# - name: "sdb"
# - name: "nvme01" # multiple osds can be created on high performance devices
# config:
# osdsPerDevice: "5"
# - name: "/dev/disk/by-id/ata-ST4000DM004-XXXX" # devices can be specified using full udev paths
# config: # configuration can be specified at the node level which overrides the cluster level config
# - name: "172.17.4.301"
# deviceFilter: "^sd."
# The section for configuring management of daemon disruptions during upgrade or fencing.
disruptionManagement:
# If true, the operator will create and manage PodDisruptionBudgets for OSD, Mon, RGW, and MDS daemons. OSD PDBs are managed dynamically
# via the strategy outlined in the [design](https://github.com/rook/rook/blob/master/design/ceph/ceph-managed-disruptionbudgets.md). The operator will
# block eviction of OSDs by default and unblock them safely when drains are detected.
managePodBudgets: true
# A duration in minutes that determines how long an entire failureDomain like `region/zone/host` will be held in `noout` (in addition to the
# default DOWN/OUT interval) when it is draining. This is only relevant when `managePodBudgets` is `true`. The default value is `30` minutes.
osdMaintenanceTimeout: 30
# A duration in minutes that the operator will wait for the placement groups to become healthy (active+clean) after a drain was completed and OSDs came back up.
# Operator will continue with the next drain if the timeout exceeds. It only works if `managePodBudgets` is `true`.
# No values or 0 means that the operator will wait until the placement groups are healthy before unblocking the next drain.
pgHealthCheckTimeout: 0
# Configure the healthcheck and liveness probes for ceph pods.
# Valid values for daemons are 'mon', 'osd', 'status'
healthCheck:
daemonHealth:
mon:
disabled: false
interval: 45s
osd:
disabled: false
interval: 60s
status:
disabled: false
interval: 60s
# Change pod liveness probe, it works for all mon, mgr, and osd pods.
livenessProbe:
mon:
disabled: false
mgr:
disabled: false
osd:
disabled: false
ingress:
dashboard: {}
# annotations:
# kubernetes.io/ingress.class: nginx
# external-dns.alpha.kubernetes.io/hostname: example.com
# nginx.ingress.kubernetes.io/rewrite-target: /ceph-dashboard/$2
# host:
# name: example.com
# path: "/ceph-dashboard(/|$)(.*)"
# tls:
cephBlockPools:
- name: ceph-blockpool-hdd
# see https://github.com/rook/rook/blob/master/Documentation/ceph-pool-crd.md#spec for available configuration
spec:
failureDomain: host
replicated:
size: 3
deviceClass: "hdd"
storageClass:
enabled: true
name: ceph-block-hdd
isDefault: true
reclaimPolicy: Delete
allowVolumeExpansion: true
# see https://github.com/rook/rook/blob/master/Documentation/ceph-block.md#provision-storage for available configuration
parameters:
imageFormat: "2"
imageFeatures: layering
# The secrets contain Ceph admin credentials.
csi.storage.k8s.io/provisioner-secret-name: rook-csi-rbd-provisioner
csi.storage.k8s.io/provisioner-secret-namespace: rook-ceph
csi.storage.k8s.io/controller-expand-secret-name: rook-csi-rbd-provisioner
csi.storage.k8s.io/controller-expand-secret-namespace: rook-ceph
csi.storage.k8s.io/node-stage-secret-name: rook-csi-rbd-node
csi.storage.k8s.io/node-stage-secret-namespace: rook-ceph
# Specify the filesystem type of the volume. If not specified, csi-provisioner
# will set default as `ext4`. Note that `xfs` is not recommended due to potential deadlock
# in hyperconverged settings where the volume is mounted on the same node as the osds.
csi.storage.k8s.io/fstype: ext4
- name: ceph-blockpool-ssd
# see https://github.com/rook/rook/blob/master/Documentation/ceph-pool-crd.md#spec for available configuration
spec:
failureDomain: host
replicated:
size: 3
deviceClass: "ssd"
storageClass:
enabled: true
name: ceph-block-ssd
isDefault: false
reclaimPolicy: Delete
allowVolumeExpansion: true
# see https://github.com/rook/rook/blob/master/Documentation/ceph-block.md#provision-storage for available configuration
parameters:
imageFormat: "2"
imageFeatures: layering
# The secrets contain Ceph admin credentials.
csi.storage.k8s.io/provisioner-secret-name: rook-csi-rbd-provisioner
csi.storage.k8s.io/provisioner-secret-namespace: rook-ceph
csi.storage.k8s.io/controller-expand-secret-name: rook-csi-rbd-provisioner
csi.storage.k8s.io/controller-expand-secret-namespace: rook-ceph
csi.storage.k8s.io/node-stage-secret-name: rook-csi-rbd-node
csi.storage.k8s.io/node-stage-secret-namespace: rook-ceph
# Specify the filesystem type of the volume. If not specified, csi-provisioner
# will set default as `ext4`. Note that `xfs` is not recommended due to potential deadlock
# in hyperconverged settings where the volume is mounted on the same node as the osds.
csi.storage.k8s.io/fstype: ext4
cephFileSystems:
- name: ceph-filesystem-ssd
# see https://github.com/rook/rook/blob/master/Documentation/ceph-filesystem-crd.md#filesystem-settings for available configuration
spec:
metadataPool:
replicated:
size: 3
deviceClass: "ssd"
dataPools:
- failureDomain: host
replicated:
size: 3
deviceClass: "ssd"
metadataServer:
activeCount: 1
activeStandby: true
storageClass:
enabled: true
name: ceph-filesystem
reclaimPolicy: Delete
# see https://github.com/rook/rook/blob/master/Documentation/ceph-filesystem.md#provision-storage for available configuration
parameters:
# The secrets contain Ceph admin credentials.
csi.storage.k8s.io/provisioner-secret-name: rook-csi-cephfs-provisioner
csi.storage.k8s.io/provisioner-secret-namespace: rook-ceph
csi.storage.k8s.io/controller-expand-secret-name: rook-csi-cephfs-provisioner
csi.storage.k8s.io/controller-expand-secret-namespace: rook-ceph
csi.storage.k8s.io/node-stage-secret-name: rook-csi-cephfs-node
csi.storage.k8s.io/node-stage-secret-namespace: rook-ceph
# Specify the filesystem type of the volume. If not specified, csi-provisioner
# will set default as `ext4`. Note that `xfs` is not recommended due to potential deadlock
# in hyperconverged settings where the volume is mounted on the same node as the osds.
csi.storage.k8s.io/fstype: ext4
# cephObjectStores:
# - name: ceph-objectstore
# # see https://github.com/rook/rook/blob/master/Documentation/ceph-object-store-crd.md#object-store-settings for available configuration
# spec:
# metadataPool:
# failureDomain: host
# replicated:
# size: 3
# dataPool:
# failureDomain: host
# erasureCoded:
# dataChunks: 2
# codingChunks: 1
# preservePoolsOnDelete: true
# gateway:
# port: 80
# # securePort: 443
# # sslCertificateRef:
# instances: 1
# healthCheck:
# bucket:
# interval: 60s
# storageClass:
# enabled: true
# name: ceph-bucket
# reclaimPolicy: Delete
# # see https://github.com/rook/rook/blob/master/Documentation/ceph-object-bucket-claim.md#storageclass for available configuration
# parameters:
# # note: objectStoreNamespace and objectStoreName are configured by the chart
# region: us-east-1