add switch to skip long compile step

doc/plan.org

@@ -2914,7 +2914,7 @@ actual
  < 0000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000040010000 >
  < 0000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000001010000 >
 
-***** TODO Testing packets: does not arrive on nf0
+***** DONE Testing packets: does not arrive on nf0 with ping6
 4: nf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
     link/ether 02:53:55:4d:45:00 brd ff:ff:ff:ff:ff:ff
     inet6 fe80::53:55ff:fe4d:4500/64 scope link
@@ -2942,7 +2942,17 @@ listening on nf1, link-type EN10MB (Ethernet), capture size 262144 bytes
 19:28:37.725181 IP6 2001:db8::1 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2001:db8::2, length 32
 19:28:38.749195 IP6 2001:db8::1 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2001:db8::2, length 32
 
+***** TODO Testing packets with send_packet.py: nothing arrives
+root@rainbow:/home/nico/master-thesis/bin# python send_packet.py nf1
+.
+Sent 1 packets.
+root@rainbow:/home/nico/master-thesis/bin# python send_packet.py nf0
+.
+Sent 1 packets.
+root@rainbow:/home/nico/master-thesis/bin#
 
+-> only shows up on the interface that we send, not on nf0 if sending
+   on nf1
 *** TODO Create either HDL or PX for supporting payload checksum
     https://github.com/NetFPGA/P4-NetFPGA-public/issues/13
     https://github.com/NetFPGA/P4-NetFPGA-public/issues/13#issuecomment-490431016
@@ -3718,6 +3728,48 @@ Fragmented ICMP/ICMPv6 packets will not be translated by IP/ICMP    translators.
 **** TODO Security issue: not checking checksums before
      - Could be implemented
 
+** Log various
+*** 2019-06-06
+No device seen after loading modules after reboot - netfpga.
+Trying to reprogram
+
+#+BEGIN_CENTER
++ xsct /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/run_xsct.tcl -tclargs minip4.bit
+rlwrap: warning: your $TERM is 'screen' but rlwrap couldn't find it in the terminfo database. Expect some problems.
+RUN loading image file.
+minip4.bit
+attempting to launch hw_server
+
+****** Xilinx hw_server v2018.2
+  **** Build date : Jun 14 2018-20:18:37
+    ** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.
+
+INFO: hw_server application started
+INFO: Use Ctrl-C to exit hw_server application
+
+INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121
+
+100%   11MB   1.7MB/s  00:06
+
++ bash /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/tools/pci_rescan_run.sh
+Check programming FPGA or Reboot machine !
++ rmmod sume_riffa
+rmmod: ERROR: Module sume_riffa is not currently loaded
++ modprobe sume_riffa
++ ifconfig nf0 up
+nf0: ERROR while getting interface flags: No such device
++ ifconfig nf1 up
+nf1: ERROR while getting interface flags: No such device
++ ifconfig nf2 up
+nf2: ERROR while getting interface flags: No such device
++ ifconfig nf3 up
+nf3: ERROR while getting interface flags: No such device
++ bash config_writes.sh
+root@rainbow:~/master-thesis/netpfga/minip4/simple_sume_switch/bitfiles#
+
+#+END_CENTER
+
+
 ** References / Follow up
 *** RFC 791 IPv4 https://tools.ietf.org/html/rfc791
 *** RFC 792 ICMP https://tools.ietf.org/html/rfc792

netpfga/do-all-steps.sh

@@ -7,6 +7,8 @@ echo "First source all variables and THEN run this script"
 read something
 
 
+
+
 # Step 1..3: create code
 # Step 4
 cd $P4_PROJECT_DIR && make
@@ -35,8 +37,12 @@ cd $NF_DESIGN_DIR/test/sim_switch_default && make
 # Step 9
 cd $SUME_FOLDER && ./tools/scripts/nf_test.py sim --major switch --minor default
 
-# Step 10
+# Step 10: long compile step
+if [ "$something" = no ]; then
+    :
+else
     cd $NF_DESIGN_DIR && make
+fi
 
 # Step 11: (nothing to be done)