master-thesis/netpfga/minip4/simple_sume_switch/hw/hdl/axi_clocking.v
2019-07-23 15:17:53 +02:00

79 lines
2.2 KiB
Verilog

//-
// Copyright (c) 2015 Noa Zilberman
// All rights reserved.
//
// This software was developed by Stanford University and the University of Cambridge Computer Laboratory
// under National Science Foundation under Grant No. CNS-0855268,
// the University of Cambridge Computer Laboratory under EPSRC INTERNET Project EP/H040536/1 and
// by the University of Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-11-C-0249 ("MRC2"),
// as part of the DARPA MRC research programme.
//
// File:
// axi_clocking.v
//
// Module:
// axi_clocking
//
// Author: Noa Zilberman
//
// Description:
// Sharable clocking resources for NetFPGA SUME
//
//
// @NETFPGA_LICENSE_HEADER_START@
//
// Licensed to NetFPGA C.I.C. (NetFPGA) under one or more contributor
// license agreements. See the NOTICE file distributed with this work for
// additional information regarding copyright ownership. NetFPGA licenses this
// file to you under the NetFPGA Hardware-Software License, Version 1.0 (the
// "License"); you may not use this file except in compliance with the
// License. You may obtain a copy of the License at:
//
// http://www.netfpga-cic.org
//
// Unless required by applicable law or agreed to in writing, Work distributed
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
//
// @NETFPGA_LICENSE_HEADER_END@
//
`timescale 1ps / 1ps
(* dont_touch = "yes" *)
module axi_clocking
(
// Inputs
input clk_in_p,
input clk_in_n,
input resetn,
// Status outputs
// IBUFDS 200MHz
output locked,
output clk_200
);
// Signal declarations
wire s_axi_dcm_aclk0;
wire clkfbout;
// 200MHz differencial into single-rail
IBUFDS clkin1_buf
(.O (clkin1),
.I (clk_in_p),
.IB (clk_in_n)
);
clk_wiz_ip clk_wiz_i
(
// Clock in ports
.clk_in1(clkin1), // input clk_in1
// Clock out ports
.clk_out1(clk_200), // output clk_out1
// Status and control signals
.resetn(resetn), // input resetn
.locked(locked));
endmodule