www.nico.schottelius.org/software/cinit/browse_source/cinit-0.0.7/doc/ipc.thoughts
Nico Schottelius 423ba10303 import cinit from unix.schottelius.org
Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org>
2009-09-16 12:53:45 +02:00

74 lines
2.3 KiB
Text

--------------------------------------------------------------------------------
Thoughts about different UNIX-IPC, Nico Schottelius 2005-04-28
--------------------------------------------------------------------------------
Howto cinit communicates with
a) cinit-forks
b) any other program
a) cinit-forks
a.1) shared memory
Access could generally be done with shared memory. The problem with
that is, that -lrt is required, which implicits -lpthread, which
makes linking staticly problematic (at least for glibc).
a.2) pipes
A maximum of ~510 pipes could be used ( (1024-3)/2),
1024=max fds, -3=already opened (stderr/stdin/stdout), /2=
two fds needed per clients).
Pipes cannot be use easily through forks of forks.
a.3) fifos
FIFOs are easy to use, but you would need to create two FIFOs
for _every_ service, as with only two FIFOs we cannot reliable
detect, _who_ is writting to us currently and who wants to read.
a.4) system-v-ipc
No documentation found nor tested.
a.5) sockets
Are indeed a very clean way. There's only one problem:
bind() fails on read-only mounted devices:
- The socket either does not exists and cannot be created
- or the socket exists, but bind() refuses to reuse it
(error: Address already in use)
Imho bind() should even honour the socket-option SO_REUSEADDR,
which allows to re-use a socket, if there's no other program bound to.
As far as I can see, SO_REUSEADDR is only honoured, if socket is of
type PF_INET (we use PF_UNIX) and POSIX does only specify how to
check for support, but not that sockets have to be able to use
SO_REUSEADDR.
That way, we are forced to mount a temporarily filesystem on
/etc/cinit/tmp and create the socket below this directory. This is not
the clean and easy solution one would wish. Still, sockets
seem to be the cleanest and most reliable way to have IPC for
this situation.
See socket(2), bind(2), listen(2), accept(2), socket(7) and unix(7)
for help.
b) any other program
What you can do is to tell cinit to
- reboot,
- halt and
- poweroff.
Simple send cinit a signal, what to do:
SIGUSR1: reboot
SIGUSR2: poweroff
TERM: halt
See signal(2) and signal(7) for help and serv/sig_reboot.c for implementation.
--------------------------------------------------------------------------------