This commit is contained in:
Nico Schottelius 2019-07-21 14:52:43 +02:00
parent f8f8c3681c
commit 71404d9a58
1 changed files with 30 additions and 1 deletions

View File

@ -5897,6 +5897,35 @@ nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/project
0000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000001040000
#+END_CENTER
**** TODO try6: debug the compile process further / find out gen_testdata use
#+BEGIN_CENTER
nico@nsg-System:~/master-thesis/netpfga/minip4$ grep gen_testdata -r .
./testdata/Makefile: ./gen_testdata.py
./src/minip4_solution-mirror.p4:// default_action = swap_eth_addresses; // test_mirror(): in gen_testdata.py
nico@nsg-System:~/master-thesis/netpfga/minip4$
nico@nsg-System:~/master-thesis/netpfga/minip4/testdata$ ./gen_testdata.py
apply packet on nf0 at 1: <Ether dst=08:22:22:22:22:08 src=08:11:11:11:11:08 |<Raw load='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' |>>
exppkt packet on nf0: <Ether dst=08:22:22:22:22:08 src=08:11:11:11:11:08 |<Raw load='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' |>>
apply packet on nf1 at 3: <Ether dst=08:22:22:22:22:08 src=08:11:11:11:11:08 |<Raw load='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' |>>
exppkt packet on nf0: <Ether dst=08:22:22:22:22:08 src=08:11:11:11:11:08 |<Raw load='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' |>>
nico@nsg-System:~/master-thesis/netpfga/minip4/testdata$
#+END_CENTER
So why did the above compile output say 3/3? like this:
#+BEGIN_CENTER
./gen_testdata.py
nf0_applied times: [3]
nf1_applied times: [3]
nf2_applied times: []
nf3_applied times: []
#+END_CENTER
Should that not be [1] and then [3]?
--------> same packet / object!!!!!!!!!!
*** TODO Further notes P4/master thesis
- Cannot easily run P4 on notebook - changes to the system very
@ -5910,7 +5939,7 @@ nico@nsg-System:~/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/project
Run output will be captured here: /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.runs/synth/runme.log
nico@nsg-System:~/master-thesis/netpfga/log$ ls -alh /home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.runs/synth/runme.log
ls: cannot access '/home/nico/projects/P4-NetFPGA/contrib-projects/sume-sdnet-switch/projects/minip4/simple_sume_switch/hw/project/simple_sume_switch.runs/synth/runme.log': No such file or directory
- even "short" compile runs taking 30m+
** The NetPFGA saga
Problems encountered: