__opendkim: fix start_on_boot on FreeBSD

There was a bit of an oddity with this, it is implemented in a way
that should not be an issue for other systems.

Reviewed at:	ungleich-public/cdist-contrib#31

type/__bird_radv/man.rst

@@ -26,6 +26,18 @@ OPTIONAL PARAMETERS
 mtu
   An optional MTU setting to include in the router advertisements.
 
+default-preference
+  This option specifies the Default Router Preference value to advertise to
+  hosts. Default: medium.
+
+route-preference
+  This option specifies the default value of advertised route preference for
+  specific routes. Default: medium.
+
+default-lifetime
+  This option specifies the time (in seconds) how long (since the receipt of RA)
+  hosts may use the router as a default router. 0 means do not use as a default
+  router. Default: 3.
 
 OPTIONAL MULTIPLE PARAMETERS
 ----------------------------

type/__bird_radv/manifest

@@ -58,27 +58,48 @@ fi
 MTU=
 if [ -f "${__object:?}/parameter/mtu" ];
 then
-	MTU="link mtu $(cat "${__object:?}/parameter/mtu")"
+	MTU="link mtu $(cat "${__object:?}/parameter/mtu");"
+fi
+
+DEFAULT_PREFERENCE=
+if [ -f "${__object:?}/parameter/default-preference" ];
+then
+	DEFAULT_PREFERENCE="default preference $(cat "${__object:?}/parameter/default-preference");"
+fi
+
+ROUTE_PREFERENCE=
+if [ -f "${__object:?}/parameter/route-preference" ];
+then
+	ROUTE_PREFERENCE="route preference $(cat "${__object:?}/parameter/route-preference");"
+fi
+
+DEFAULT_LIFETIME=
+if [ -f "${__object:?}/parameter/default-lifetime" ];
+then
+	DEFAULT_LIFETIME="default lifetime $(cat "${__object:?}/parameter/default-lifetime");"
 fi
 
 __file "${confdir:?}/radv-${__object_id:?}.conf" \
 	--mode 0640 --owner root --group bird \
 	--source - << EOF
-ipv6 table radv_routes;
+ipv6 table radv_routes_${__object_id};
 
 protocol static {
 	description "Routes advertised via RAs";
-	ipv6 { table radv_routes; };
+	ipv6 { table radv_routes_${__object_id}; };
 
 $(sed -e 's/^/\troute /' -e 's/$/ unreachable;/' "${__object:?}/parameter/route")
 }
 
 protocol radv ${__object_id:?} {
 	propagate routes ${have_routes:?};
-	ipv6 { table radv_routes; export all; };
+	ipv6 { table radv_routes_${__object_id}; export all; };
 
 	interface "$(cat "${__object:?}/parameter/interface")" {
 	$MTU
+	$DEFAULT_LIFETIME
+	$DEFAULT_PREFERENCE
+	$ROUTE_PREFERENCE
 	};
 
 $RDNS

type/__bird_radv/parameter/optional

@@ -1 +1,4 @@
 mtu
+default-preference
+route-preference
+default-lifetime

type/__jitsi_meet/explorer/configured-memory

@@ -0,0 +1,15 @@
+#!/bin/sh -eu
+
+JICOFO="/usr/share/jicofo/jicofo.sh"
+VIDEOBRIDGE="/usr/share/jitsi-videobridge/lib/videobridge.rc"
+
+if [ -f "${JICOFO:?}" ]; then
+	jicofo_memory="$(grep JICOFO_MAX_MEMORY= "${JICOFO:?}" | cut -d= -f 2 | cut -d ";" -f 1)"
+fi
+if [ -f "${VIDEOBRIDGE:?}" ]; then
+	vb_memory="$(grep VIDEOBRIDGE_MAX_MEMORY= "${VIDEOBRIDGE:?}" | cut -d= -f 2)"
+fi
+cat <<EOF
+jicofo	${jicofo_memory:-n/a}
+videobridge	${vb_memory:-n/a}
+EOF

type/__jitsi_meet/explorer/jicofo-authpassword

@@ -0,0 +1,26 @@
+#!/bin/sh -eu
+
+JICOFO_AUTHPASSWORD=""
+# We need this to properly configure jicofo
+
+# Default to reading debconf
+DEBCONF_PASS_FILE="/var/cache/debconf/passwords.dat"
+if [ -f "${DEBCONF_PASS_FILE}" ]; then
+	JICOFO_AUTHPASSWORD="$(grep -A1 'Template: jicofo/jicofo-authpassword' "${DEBCONF_PASS_FILE}" | tail -n 1 | cut -d ' ' -f 2-)"
+fi
+
+# Try jicofo.conf if necessary
+JICOFO_CONF_FILE="/etc/jitsi/jicofo/jicofo.conf"
+if [ -z "${JICOFO_AUTHPASSWORD}" ] && [ -f "${JICOFO_CONF_FILE}" ]; then
+	JICOFO_AUTHPASSWORD="$(grep -E '^[[:space:]]*password:' "${JICOFO_CONF_FILE}" | sed -E 's!^[^:]*:[[:space:]]*"(.*)"$!\1!')"
+fi
+
+# And fallback to config file if necessary
+JICOFO_CONFIG_FILE="/etc/jitsi/jicofo/config"
+if [ -z "${JICOFO_AUTHPASSWORD}" ] && [ -f "${JICOFO_CONFIG_FILE}" ]; then
+	JICOFO_AUTHPASSWORD="$(grep -E '^JICOFO_AUTH_PASSWORD=' "${JICOFO_CONFIG_FILE}" | cut -d '=' -f 2-)"
+fi
+
+# If we didn't find it, this is likely a new installation and we'll generate
+# the password on the manifest
+echo "${JICOFO_AUTHPASSWORD:-}"

type/__jitsi_meet/explorer/jitsi-status

@@ -0,0 +1,6 @@
+#!/bin/sh -eu
+
+if [ ! -f "${__object}/parameter/disable-prometheus-exporter" ]; then
+	# TODO: detect curl / depend on it?
+	curl -s localhost:9888/metrics
+fi

type/__jitsi_meet/explorer/prometheus-jitsi-meet-explorer-version

@@ -1,7 +0,0 @@
-#!/bin/sh -e
-
-EXPORTER_VERSION_FILE="/usr/local/bin/.prometheus-jitsi-meet-exporter.cdist.version"
-
-if [ -f "${EXPORTER_VERSION_FILE}" ]; then
-	cat "${EXPORTER_VERSION_FILE}"
-fi

type/__jitsi_meet/files/debconf_settings.sh

@@ -5,9 +5,6 @@
 if false; then
 	# We are currently not using these, just here as documentation
 	DEBCONF_SETTINGS="$(cat <<EOF
-# Jicofo user password:
-jicofo	jicofo/jicofo-authpassword	password	STH
-jitsi-meet-prosody	jicofo/jicofo-authpassword	password	STH
 # The secret used to connect to xmpp server as component
 jitsi-meet-prosody	jitsi-videobridge/jvbsecret	password	STH
 jitsi-videobridge	jitsi-videobridge/jvbsecret	password	STH
@@ -40,6 +37,9 @@ jitsi-videobridge	jitsi-videobridge/jvb-hostname	string	${JITSI_HOST}
 jitsi-videobridge2	jitsi-videobridge/jvb-hostname	string	${JITSI_HOST}
 # The hostname of the current installation:
 jitsi-meet-prosody	jitsi-meet-prosody/jvb-hostname string	${JITSI_HOST}
+# Jicofo user password:
+jicofo	jicofo/jicofo-authpassword	password	${JICOFO_AUTHPASSWORD}
+jitsi-meet-prosody	jicofo/jicofo-authpassword	password	${JICOFO_AUTHPASSWORD}
 # SSL certificate for the Jitsi Meet instance
 # Choices: Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate), I want to use my own certificate
 jitsi-meet-web-config	jitsi-meet/cert-choice	select	Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate)

type/__jitsi_meet/files/jicofo.conf.sh

@@ -0,0 +1,38 @@
+#!/bin/sh -eu
+
+# Start
+cat <<EOF
+# Managed remotely, changes will be lost
+
+# Jicofo HOCON configuration. See /usr/share/jicofo/jicofo.jar/reference.conf for
+#available options, syntax, and default values.
+jicofo {
+  xmpp: {
+    client: {
+      client-proxy: focus.${JITSI_HOST:?}
+      xmpp-domain: "${JITSI_HOST:?}"
+      domain: "auth.${JITSI_HOST:?}"
+      username: "focus"
+      password: "${JICOFO_AUTHPASSWORD:?}"
+    }
+    trusted-domains: [ "recorder.${JITSI_HOST:?}" ]
+  }
+  bridge: {
+    brewery-jid: "JvbBrewery@internal.auth.${JITSI_HOST:?}"
+  }
+EOF
+
+# Secured domains if needed
+if [ "${SECURED_DOMAINS_STATE:?}" = "present" ]; then
+cat <<EOF
+
+  authentication: {
+    enabled: true
+    type: XMPP
+    login-url: ${JITSI_HOST:?}
+  }
+EOF
+fi
+
+# End
+echo '}'

type/__jitsi_meet/files/jitsi-version

@@ -0,0 +1 @@
+../../__jitsi_meet_domain/files/jitsi-version

type/__jitsi_meet/files/prosody.cfg.lua.sh

@@ -0,0 +1 @@
+../../__jitsi_meet_domain/files/prosody.cfg.lua.sh

type/__jitsi_meet/gencode-remote

@@ -1,11 +1,43 @@
 #!/bin/sh -e
 
+memory="$(cat "${__global}/explorer/memory")"
+G="000000"  # Will totally eff up the zero-count otherwise
+# MAX_MEMORY will affect jicofo and videobridge
+#  As a rule of thumb, the machine's RAM should be more than 2.5 * MAX_MEMORY
+if [ "${memory}" -lt "3${G}" ]; then
+	# If you use this, let us know how it works!
+	MAX_MEMORY="768m"
+elif [ "${memory}" -lt "5${G}" ]; then
+	MAX_MEMORY="1024m"
+elif [ "${memory}" -lt "8${G}" ]; then
+	MAX_MEMORY="2048m"
+else
+	# Jitsi recommends running on 8G RAM and these are the defaults
+	MAX_MEMORY="3072m"
+fi
+
+if cut -f 2 "${__object}/explorer/configured-memory" | grep -qvE "^${MAX_MEMORY}$"; then
+	# At least one service has different memory settings
+	RESTART_SERVICES="YES"
+	cat <<-EOF
+	sed -i.tmp -E \
+		-e 's!^(#[[:space:]]*)?(VIDEOBRIDGE_MAX_MEMORY)=.*\$!\2=${MAX_MEMORY}!' \
+		/usr/share/jitsi-videobridge/lib/videobridge.rc
+	sed -i.tmp -E \
+		-e 's!(JICOFO_MAX_MEMORY)[^";]+;!\1=${MAX_MEMORY};!' \
+		/usr/share/jicofo/jicofo.sh
+	EOF
+fi
+
 if grep -qE "^__file/etc/nginx" "${__messages_in}"; then
 	echo "service nginx reload"
 fi
 
-JITSI_HOST="${__object_id}"
-if grep -qE "^(__line/jitsi_jicofo_secured_domains|__file/etc/prosody/conf.d/${JITSI_HOST}.zauth.cfg.lua)" "${__messages_in}"; then
+if grep -qE "^(__line/jitsi_jicofo_secured_domains|(__file|__link)/etc/prosody/conf.d/|__file/etc/jitsi/(jicofo/jicofo.conf|videobridge/jvb.conf))" "${__messages_in}"; then
+	RESTART_SERVICES="YES"
+fi
+
+if [ -n "${RESTART_SERVICES}" ]; then
   echo "systemctl restart prosody"
   echo "systemctl restart jicofo"
   echo "systemctl restart jitsi-videobridge2"

type/__jitsi_meet/man.rst

@@ -21,13 +21,24 @@ You will also need the `__jitsi_meet_domain` type in order to finish setting up
 the web frontend (including TLS certificates) and its settings.
 
 You may want to use the `files/ufw` example manifest for a `__ufw`-based
-firewall compatible with this type.
-This file does not include rules for TCP port 9888, which exposes the
-prometheus exporter if not disabled.
-You should apply your own rules here.
+firewall compatible with this type that allows all ports needed by Jitsi-Meet.
+Note however that this will not deal with rules for SSH or for TCP port 9888,
+which exposes the prometheus exporter if not disabled.
+Remember to apply your own rules here, particularly regarding SSH.
 
 This type only works on De{bi,vu}an systems.
 
+It is very important for this type to stay up to date with the software, as
+otherwise new deployments or maintenance of existing instances might be
+negatively affected.
+If you can, please contribute updates to `__jitsi_meet` and
+`__jitsi_meet_domain` promptly and regularly.
+Alternatively, you can help finance that work; get in touch with the type
+authors for that (see below).
+
+This type takes care of adapting the maximum memory used by jicofo and
+videobridge in function of the hosts installed memory.
+
 NOTE: This type currently does not deal with setting up coturn.
       For that, you might want to check `__coturn` in
       https://code.ungleich.ch/ungleich-public/cdist-contrib
@@ -36,6 +47,14 @@ NOTE: This type currently does not deal with setting up coturn.
 
 OPTIONAL PARAMETERS
 -------------------
+abort-conference-count
+    Only has an effect if the prometheus exporter is enabled and if it is not
+    empty (default).
+    If at least this many conferences are active on the server, the type will
+    bail out before making any changes.
+    This is useful if you want to avoid service disruptions due to e.g. an SLA.
+
+
 turn-secret
     The shared secret for the TURN server.
 
@@ -43,11 +62,6 @@ turn-server
     The hostname of the TURN server.
     This will assume that it is listening with TLS on port 443.
 
-jitsi-version
-    The jitsi-meet version of the Debian package to be installed.
-    While this can be specified, only the default value is known to work
-    properly with this type.
-
 
 BOOLEAN PARAMETERS
 ------------------
@@ -70,9 +84,11 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Setup the firewall 
+    # Setup the firewall for Jitsi-Meet
     . "${__global}/type/__jitsi_meet/files/ufw"
     export require="__ufw"
+    # Setup firewall SSH rules as necessary
+    __ufw_rule ssh --rule 'allow 22/tcp from 10.0.0.0/24'
     # Setup Jitsi on this host
     __jitsi_meet \
       --turn-server "turn.exo.cat" \
@@ -92,4 +108,4 @@ Evilham <contact@evilham.com>
 
 COPYING
 -------
-Copyright \(C) 2021 Evilham.
+Copyright \(C) 2022 Evilham.

type/__jitsi_meet/manifest

@@ -1,7 +1,6 @@
 #!/bin/sh -e
 
 os="$(cat "${__global}/explorer/os")"
-init="$(cat "${__global}/explorer/init")"
 case "${os}" in
 	devuan|debian)
 	;;
@@ -11,10 +10,37 @@ case "${os}" in
 	;;
 esac
 
+current_conferences="$(cat "${__object}/explorer/jitsi-status" | grep -E "^jitsi_conferences[[:space:]]" | cut -d ' ' -f 2)"
+
+JICOFO_AUTHPASSWORD="$(cat "${__object}/explorer/jicofo-authpassword")"
+if [ -z "${JICOFO_AUTHPASSWORD}" ]; then
+	# This is probably a first time installation, we'll generate the
+	# password which will be set in debconf by this type
+	# https://github.com/jitsi/jicofo/blob/aafb61b5363a1c4abdbf08e1444a6276b807993e/debian/postinst#L43
+	JICOFO_AUTHPASSWORD="$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | head -c 16)"
+fi
+
+ABORT_CONFERENCE_COUNT="$(cat "${__object}/parameter/abort-conference-count")"
+
+if [ -n "${current_conferences}" ] && [ -n "${ABORT_CONFERENCE_COUNT}" ] && \
+	[ "${ABORT_CONFERENCE_COUNT}" -le "${current_conferences}" ]; then
+	cat <<-EOF
+Early bail out was requested when at least ${ABORT_CONFERENCE_COUNT} conferences are taking place.
+There are currently ${current_conferences} active conferences.
+
+Try again at a later time or remove or increase --abort-conference-count
+	EOF
+	exit 1
+fi
 
 JITSI_HOST="${__target_host}"
-# Currently unused, see below
-# JITSI_VERSION="$(cat "${__object}/parameter/jitsi-version")"
+if [ -f "${__object}/parameter/jitsi-version" ]; then
+	# This has been deprecated and will be removed 'soon'
+	JITSI_VERSION="$(cat "${__object}/parameter/jitsi-version")"
+else
+	# Note this won't be a parameter anymore, we won't let users stay behind
+	JITSI_VERSION="$(cat "${__type}/files/jitsi-version")"
+fi
 TURN_SERVER="$(cat "${__object}/parameter/turn-server")"
 TURN_SECRET="$(cat "${__object}/parameter/turn-secret")"
 
@@ -22,8 +48,6 @@ if [ -z "${TURN_SERVER}" ]; then
 	TURN_SERVER="${JITSI_HOST}"
 fi
 
-PROMETHEUS_JITSI_EXPORTER_IS_VERSION="$(cat "${__object}/explorer/prometheus-jitsi-meet-explorer-version")"
-
 # The rest is loosely based on Jitsi's documentation
 # https://jitsi.github.io/handbook/docs/devops-guide/devops-guide-quickstart
 
@@ -55,11 +79,12 @@ __debconf_set_selections jitsi_meet --line "${DEBCONF_SETTINGS}"
 export require="${require} __debconf_set_selections/jitsi_meet"
 
 # Install and upgrade packages as needed
-__package_apt jitsi-meet
-# We are not doing version pinning anymore because it breaks when
+#   NOTE: we are doing version pinning again, but it breaks sometimes when
 #         the version is not the latest.
-# This happens because dependencies cannot be properly resolved.
-# --version "${JITSI_VERSION}"
+#         This happens because dependencies might not be properly resolved.
+#         To avoid this, this type must be maintained up to date.
+#         If we don't use this, keeping Jitsi's up to date is very difficult.
+__package_apt jitsi-meet --version "${JITSI_VERSION}"
 
 # Proceed only after installation/upgrade has finished
 export require="__package_apt/jitsi-meet"
@@ -124,8 +149,9 @@ require="__directory${NGINX_ETC}/sites-available" __file "${NGINX_ETC}/sites-ava
 server_names_hash_bucket_size 64;
 
 types {
-# nginx's default mime.types doesn't include a mapping for wasm
+# nginx's default mime.types doesn't include a mapping for wasm or wav.
     application/wasm     wasm;
+    audio/wav            wav;
 }
 
 server {
@@ -149,95 +175,157 @@ server {
 }
 EOF
 
-if [ -f "${__object}/parameter/secured-domains" ]; then
-  SECURED_DOMAINS_STATE='present'
-  SECURED_DOMAINS_STATE_JICOFO='present'
-else
-  SECURED_DOMAINS_STATE='absent'
-  SECURED_DOMAINS_STATE_JICOFO='absent'
-fi
-
-__file "/etc/prosody/conf.d/${JITSI_HOST}.zauth.cfg.lua" \
-  --owner prosody --group prosody --mode 0440 \
-  --state ${SECURED_DOMAINS_STATE} \
+# Starting from 2.0.7210, jitsi defines following nginx upstreams
+__directory "${NGINX_ETC}/conf.d" --state present
+require="__directory${NGINX_ETC}/conf.d" __file "${NGINX_ETC}/conf.d/prosody.conf" \
+  --mode 644 \
   --source - << EOF
-VirtualHost "${JITSI_HOST}"
-    authentication = "internal_plain"
-
-VirtualHost "guest.${JITSI_HOST}"
-    authentication = "anonymous"
-    c2s_require_encryption = false
+upstream prosody {
+    zone upstreams 64K;
+    server 127.0.0.1:5280;
+    keepalive 2;
+}
 EOF
-
-__block jitsi_jicofo_secured_domains \
-  --prefix "// begin cdist: jicofo_secured_domains" \
-  --suffix "// end   cdist: jicofo_secured_domains" \
-  --file /etc/jitsi/jicofo/jicofo.conf \
-  --state "${SECURED_DOMAINS_STATE_JICOFO}" \
-  --text '-' <<EOF
-  authentication: {
-    enabled: true
-    type: XMPP
-    login-url: ${JITSI_HOST}
+require="__directory${NGINX_ETC}/conf.d" __file "${NGINX_ETC}/conf.d/jvb1.conf" \
+  --mode 644 \
+  --source - << EOF
+upstream jvb1 {
+    zone upstreams 64K;
+    server 127.0.0.1:9090;
+    keepalive 2;
+}
+EOF
+require="__directory${NGINX_ETC}/conf.d" __file "${NGINX_ETC}/conf.d/jicofo.conf" \
+  --mode 644 \
+  --source - << EOF
+upstream jicofo {
+    zone upstreams 64K;
+    server 127.0.0.1:8888;
+    keepalive 2;
 }
 EOF
 
+if [ -f "${__object}/parameter/secured-domains" ]; then
+  SECURED_DOMAINS_STATE='present'
+else
+  SECURED_DOMAINS_STATE='absent'
+fi
+
+# This is the main host config
+PROSODY_MAIN_CONFIG="YES"
+# Prosody settings for common components (jvb, focus, ...)
+# shellcheck source=type/__jitsi_meet/files/prosody.cfg.lua.sh
+. "${__type}/files/prosody.cfg.lua.sh"  # This defines PROSODY_CONFIG
+__file "/etc/prosody/conf.d/00_jitsi_base.cfg.lua" \
+	--group prosody \
+	--mode 0440 \
+	--source - <<EOF
+${PROSODY_CONFIG}
+EOF
+
+# Clean up zauth.cfg.lua file, which we don't use now
+__file "/etc/prosody/conf.d/${JITSI_HOST}.zauth.cfg.lua" \
+  --state absent
+
+export SECURED_DOMAINS_STATE
+export JITSI_HOST
+export JICOFO_AUTHPASSWORD
+"${__type}/files/jicofo.conf.sh" | \
+	__file /etc/jitsi/jicofo/jicofo.conf --mode 0444 --source '-'
+
+# Enable the private colibri REST API end point for better stats
+__file "/etc/jitsi/videobridge/jvb.conf" --mode 0444 --source '-' <<EOFJVB
+videobridge {
+    http-servers {
+        public {
+            port = 9090
+        }
+        private {
+            port = 8080
+        }
+    }
+    websockets {
+        enabled = true
+        domain = "${JITSI_HOST}:443"
+        tls = true
+    }
+    apis {
+        rest {
+            enabled = true
+        }
+    }
+    cc {
+        trust-bwe = false
+    }
+}
+EOFJVB
+
+# Enable simple per-domain body customisation
+__file "/usr/share/jitsi-meet/body.html" \
+	--mode 0644 \
+	--source '-' <<EOF
+<!--#include virtual="body-\${host}.html" -->
+EOF
+
 # These two should be changed on new release
-PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION="1.1.5"
-PROMETHEUS_JITSI_EXPORTER_CHECKSUM="sha256:3ddf43a48d9a2f62be1bc6db9e7ba75d61994f9423e5c5b28be019f41f06f745"
-PROMETHEUS_JITSI_EXPORTER_URL="https://github.com/systemli/prometheus-jitsi-meet-exporter/releases/download/${PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION}/prometheus-jitsi-meet-exporter-linux-amd64"
-PROMETHEUS_JITSI_EXPORTER_VERSION_FILE="/usr/local/bin/.prometheus-jitsi-meet-exporter.cdist.version"
-if [ ! -f "${__object}/parameter/disable-prometheus-exporter" ]; then
-	case "${init}" in
-		init|sysvinit)
-			__runit
-			require="__runit" __runit_service \
-				prometheus-jitsi-meet-exporter --log --source - <<EOF
-			#!/bin/sh -e
-			cd /tmp
-			exec chpst -u "nobody:nogroup" env HOME="/tmp" \\
-			     prometheus-jitsi-meet-exporter \\
-				-videobridge-url 'http://localhost:8888/stats' \\
-				-web.listen-address ':9888' 2>&1
-EOF
-
-			export require="__runit_service/prometheus-jitsi-meet-exporter"
-			JITSI_MEET_EXPORTER_SERVICE="sv %s prometheus-jitsi-meet-exporter"
-		;;
-		systemd)
-			__systemd_unit prometheus-jitsi-meet-exporter.service \
-				--source "-" \
-				--enablement-state "enabled" <<EOF
-[Unit]
-Description=Metrics Exporter for Jitsi Meet
-After=network.target
-
-[Service]
-Type=simple
-DynamicUser=yes
-ExecStart=/usr/local/bin/prometheus-jitsi-meet-exporter -videobridge-url 'http://localhost:8888/stats' -web.listen-address ':9888'
-Restart=always
-
-[Install]
-WantedBy=multi-user.target
-EOF
-			export require="__systemd_unit/prometheus-jitsi-meet-exporter.service"
-			JITSI_MEET_EXPORTER_SERVICE="service prometheus-jitsi-meet-exporter %s"
-		;;
-	esac
-	if [ "${PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION}" != \
-		"${PROMETHEUS_JITSI_EXPORTER_IS_VERSION}" ]; then
-		# shellcheck disable=SC2059
-		__download \
-			/tmp/prometheus-jitsi-meet-exporter \
-			--url "${PROMETHEUS_JITSI_EXPORTER_URL}" \
-			--download remote \
-			--sum "${PROMETHEUS_JITSI_EXPORTER_CHECKSUM}" \
-			--onchange "$(printf "${JITSI_MEET_EXPORTER_SERVICE}" "stop") || true; chmod 555 /tmp/prometheus-jitsi-meet-exporter && mv /tmp/prometheus-jitsi-meet-exporter /usr/local/bin/prometheus-jitsi-meet-exporter && $(printf "${JITSI_MEET_EXPORTER_SERVICE}" "restart")"
-		printf "%s" "${PROMETHEUS_JITSI_EXPORTER_SHOULD_VERSION}" | \
-			require="${require} __download/tmp/prometheus-jitsi-meet-exporter" __file \
-			"${PROMETHEUS_JITSI_EXPORTER_VERSION_FILE}" \
-			--source "-"
+EXPORTER_VERSION="1.2.1"
+EXPORTER_CHECKSUM="sha256:46d4b8475b72fd7632a5203f1cc3c7067bed4629902b7780a1da85e4e06c2129"
+EXPORTER_URL="https://github.com/systemli/prometheus-jitsi-meet-exporter/releases/download/${EXPORTER_VERSION}/prometheus-jitsi-meet-exporter_${EXPORTER_VERSION}_linux_amd64.tar.gz"
+if [ -f "${__object}/parameter/disable-prometheus-exporter" ]; then
+	EXPORTER_STATE="absent"
+else
+	EXPORTER_STATE="present"
 fi
-fi
-# TODO: disable the exporter if it is deployed and then admin changes their mind
+__single_binary_service prometheus-jitsi-meet-exporter \
+	--state "${EXPORTER_STATE}" \
+	--do-not-manage-user \
+	--user "nobody" \
+	--group "nogroup" \
+	--version "${EXPORTER_VERSION}" \
+	--checksum "${EXPORTER_CHECKSUM}" \
+	--url "${EXPORTER_URL}" \
+	--unpack \
+	--service-args "-videobridge-url 'http://localhost:8080/colibri/stats' -web.listen-address ':9888'"
+
+#
+# Setup interpreter assets if requested
+# See: https://gitlab.com/mfmt/jsi/
+#
+jsi_updated_on="2022-04-21"
+__link "/usr/share/jitsi-meet/interpreters.html" \
+	--type symbolic \
+	--source "/opt/jsi/static/index.html.sample"
+__directory /opt/jsi --mode 0755
+export require="__directory/opt/jsi"
+__download /opt/jsi/jsi.tar.gz \
+	--url 'https://gitlab.com/mfmt/jsi/-/archive/1d2cceaf615ee61c0bba80e5bddc61c5d1018303/jsi-1d2cceaf615ee61c0bba80e5bddc61c5d1018303.tar.gz' \
+	--sum "sha256:b020141093daa9937507b098f358d0be994834c3e23866a457fc5140415a0c53"
+export require="__download/opt/jsi/jsi.tar.gz"
+__unpack /opt/jsi/jsi.tar.gz \
+	--preserve-archive \
+	--tar-strip 1 \
+	--destination /opt/jsi/static \
+	--onchange "$(cat <<EOF
+# Patch style.css to be served on /i/
+sed -i.tmp -E \
+	-e 's!url[(]/img/welcome-background.png[)]!url(/i/img/welcome-background.png)!' \
+	/opt/jsi/static/style.css
+# Patch jsi.js to be served on /i/
+#   and so it always uses the domain it's served from
+#   and so it uses /i/ROOM for the form
+sed -i.tmp -E \
+	-e 's!substr[(][0-9]+[)]!substr(3)!' \
+	-e 's!config[.]jitsimeet_url!url.host!' \
+	-e 's!(window[.]location[.]href)[[:space:]]*=[[:space:]]*"/"!\1 = "/i/"!' \
+	/opt/jsi/static/jsi.js
+# Patch the sample index.html, so it loads external_api.js from same host
+#   and to easen up on the branding
+#   and to enable browser cache
+sed -i.tmp -E \
+	-e "s!src=[^>]*(/external_api.js).!src='\1'!" \
+	-e "s!<h1>[^<]*</h1>!<h1>Jitsi Meetings with interpreter</h1>!" \
+	-e "s!https://meet.mayfirst.org!/!" \
+	-e "s!(style.css|jsi.js)([^?])!\1?v=${jsi_updated_on:?}\2!" \
+	/opt/jsi/static/index.html.sample
+EOF
+)"

type/__jitsi_meet/parameter/default/jitsi-version

@@ -1 +0,0 @@
-2.0.7001-1

type/__jitsi_meet/parameter/deprecated/jitsi-version

@@ -0,0 +1,4 @@
+Supporting different versions lead to strange issues in the life-time of a
+Jitsi instance. Chiefly: difficulties upgrading.
+
+If you are specifying this for a valid reason, please get in touch.

type/__jitsi_meet/parameter/optional

@@ -1,3 +1,4 @@
+abort-conference-count
 jitsi-version
 turn-secret
 turn-server

type/__jitsi_meet_domain/files/_update_jitsi_configurations.sh

@@ -7,7 +7,7 @@
 
 # We could automate this, but are using it as an indicator for the
 # latest branch with which we conciliated changes.
-BRANCH="jitsi-meet_7001"
+BRANCH="jitsi-meet_9457"
 REPO="https://github.com/jitsi/jitsi-meet"
 
 get_url() {
@@ -28,3 +28,8 @@ download_file() {
 download_file config.js
 download_file interface_config.js
 download_file doc/debian/jitsi-meet/jitsi-meet.example nginx.sh.orig
+download_file doc/debian/jitsi-meet-prosody/prosody.cfg.lua-jvb.example prosody.cfg.lua.sh.orig
+
+# Change the version file, maintainers should check that it matches
+# the deb version
+printf "2.0.%s-1" "${BRANCH#*_}" > jitsi-version

type/__jitsi_meet_domain/files/interface_config.js.sh

@@ -20,7 +20,7 @@ JITSI_INTERFACE_CONFIG_JS="$(cat <<EOF
  */
 
 var interfaceConfig = {
-    APP_NAME: 'Jitsi Meet',
+    APP_NAME: '${BRANDING_APP_NAME}',
     AUDIO_LEVEL_PRIMARY_COLOR: 'rgba(255,255,255,0.4)',
     AUDIO_LEVEL_SECONDARY_COLOR: 'rgba(255,255,255,0.2)',
 
@@ -38,7 +38,6 @@ var interfaceConfig = {
     CLOSE_PAGE_GUEST_HINT: false, // A html text to be shown to guests on the close page, false disables it
 
     DEFAULT_BACKGROUND: '#040404',
-    DEFAULT_LOGO_URL: '${BRANDING_WATERMARK_PATH}',
     DEFAULT_WELCOME_PAGE_LOGO_URL: '${BRANDING_WATERMARK_PATH}',
 
     DISABLE_DOMINANT_SPEAKER_INDICATOR: false,
@@ -82,17 +81,13 @@ var interfaceConfig = {
 
     ENABLE_DIAL_OUT: true,
 
-    ENABLE_FEEDBACK_ANIMATION: false, // Enables feedback star animation.
+    // DEPRECATED. Animation no longer supported.
+    // ENABLE_FEEDBACK_ANIMATION: false,
 
     FILM_STRIP_MAX_HEIGHT: 120,
 
     GENERATE_ROOMNAMES_ON_WELCOME_PAGE: true,
 
-    /**
-     * Hide the logo on the deep linking pages.
-     */
-    HIDE_DEEP_LINKING_LOGO: false,
-
     /**
      * Hide the invite prompt in the header when alone in the meeting.
      */
@@ -101,7 +96,6 @@ var interfaceConfig = {
     JITSI_WATERMARK_LINK: 'https://jitsi.org',
 
     LANG_DETECTION: true, // Allow i18n to detect the system language
-    LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live', // Documentation reference for the live streaming feature.
     LOCAL_THUMBNAIL_RATIO: 16 / 9, // 16:9
 
     /**
@@ -121,28 +115,11 @@ var interfaceConfig = {
      */
     MOBILE_APP_PROMO: true,
 
-    /**
-     * Specify custom URL for downloading android mobile app.
-     */
-    MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
-
-    /**
-     * Specify custom URL for downloading f droid app.
-     */
-    MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
-
-    /**
-     * Specify URL for downloading ios mobile app.
-     */
-    MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
-
-    NATIVE_APP_NAME: 'Jitsi Meet',
-
     // Names of browsers which should show a warning stating the current browser
     // has a suboptimal experience. Browsers which are not listed as optimal or
     // unsupported are considered suboptimal. Valid values are:
-    // chrome, chromium, edge, electron, firefox, nwjs, opera, safari
-    OPTIMAL_BROWSERS: [ 'chrome', 'chromium', 'firefox', 'nwjs', 'electron', 'safari' ],
+    // chrome, chromium, electron, firefox , safari, webkit
+    OPTIMAL_BROWSERS: [ 'chrome', 'chromium', 'firefox', 'electron', 'safari', 'webkit' ],
 
     POLICY_LOGO: null,
     PROVIDER_NAME: 'Jitsi',
@@ -155,7 +132,7 @@ var interfaceConfig = {
     RECENT_LIST_ENABLED: true,
     REMOTE_THUMBNAIL_RATIO: 1, // 1:1
 
-    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds' ],
+    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds', 'more' ],
 
     /**
      * Specify which sharing features should be displayed. If the value is not set
@@ -172,7 +149,6 @@ var interfaceConfig = {
      */
     SHOW_CHROME_EXTENSION_BANNER: false,
 
-    SHOW_DEEP_LINKING_IMAGE: false,
     SHOW_JITSI_WATERMARK: true,
     SHOW_POWERED_BY: false,
     SHOW_PROMOTIONAL_CLOSE_PAGE: false,
@@ -213,6 +189,31 @@ var interfaceConfig = {
      */
     // TILE_VIEW_MAX_COLUMNS: 5,
 
+    // List of undocumented settings
+    /**
+     INDICATOR_FONT_SIZES
+     PHONE_NUMBER_REGEX
+    */
+
+    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
+
+    /**
+     * Specify URL for downloading ios mobile app.
+     */
+    // MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
+
+    /**
+     * Specify custom URL for downloading android mobile app.
+     */
+    // MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
+
+    /**
+     * Specify mobile app scheme for opening the app from the mobile browser.
+     */
+    // APP_SCHEME: 'org.jitsi.meet',
+
+    // NATIVE_APP_NAME: 'Jitsi Meet',
+
     /**
      * Specify Firebase dynamic link properties for the mobile apps.
      */
@@ -225,22 +226,19 @@ var interfaceConfig = {
     // },
 
     /**
-     * Specify mobile app scheme for opening the app from the mobile browser.
+     * Hide the logo on the deep linking pages.
      */
-    // APP_SCHEME: 'org.jitsi.meet',
+    // HIDE_DEEP_LINKING_LOGO: false,
 
     /**
      * Specify the Android app package name.
      */
     // ANDROID_APP_PACKAGE: 'org.jitsi.meet',
 
-    // List of undocumented settings
     /**
-     INDICATOR_FONT_SIZES
-     PHONE_NUMBER_REGEX
+     * Specify custom URL for downloading f droid app.
      */
-
-    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
+    // MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
 
     // Connection indicators (
     // CONNECTION_INDICATOR_AUTO_HIDE_ENABLED,
@@ -253,12 +251,19 @@ var interfaceConfig = {
     // Please use defaultLocalDisplayName from config.js
     // DEFAULT_LOCAL_DISPLAY_NAME: 'me',
 
+    // Please use defaultLogoUrl from config.js
+    DEFAULT_LOGO_URL: '${BRANDING_WATERMARK_PATH}',
+
     // Please use defaultRemoteDisplayName from config.js
     // DEFAULT_REMOTE_DISPLAY_NAME: 'Fellow Jitster',
 
     // Moved to config.js as \`toolbarConfig.initialTimeout\`.
     // INITIAL_TOOLBAR_TIMEOUT: 20000,
 
+    // Moved to config.js as \`toolbarConfig.alwaysVisible\`.
+    // Documentation reference for the live streaming feature.
+    // LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live',
+
     // Moved to config.js as \`toolbarConfig.alwaysVisible\`.
     // TOOLBAR_ALWAYS_VISIBLE: false,
 

type/__jitsi_meet_domain/files/interface_config.js.sh.orig

@@ -27,7 +27,6 @@ var interfaceConfig = {
     CLOSE_PAGE_GUEST_HINT: false, // A html text to be shown to guests on the close page, false disables it
 
     DEFAULT_BACKGROUND: '#040404',
-    DEFAULT_LOGO_URL: 'images/watermark.svg',
     DEFAULT_WELCOME_PAGE_LOGO_URL: 'images/watermark.svg',
 
     DISABLE_DOMINANT_SPEAKER_INDICATOR: false,
@@ -71,17 +70,13 @@ var interfaceConfig = {
 
     ENABLE_DIAL_OUT: true,
 
-    ENABLE_FEEDBACK_ANIMATION: false, // Enables feedback star animation.
+    // DEPRECATED. Animation no longer supported.
+    // ENABLE_FEEDBACK_ANIMATION: false,
 
     FILM_STRIP_MAX_HEIGHT: 120,
 
     GENERATE_ROOMNAMES_ON_WELCOME_PAGE: true,
 
-    /**
-     * Hide the logo on the deep linking pages.
-     */
-    HIDE_DEEP_LINKING_LOGO: false,
-
     /**
      * Hide the invite prompt in the header when alone in the meeting.
      */
@@ -90,7 +85,6 @@ var interfaceConfig = {
     JITSI_WATERMARK_LINK: 'https://jitsi.org',
 
     LANG_DETECTION: true, // Allow i18n to detect the system language
-    LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live', // Documentation reference for the live streaming feature.
     LOCAL_THUMBNAIL_RATIO: 16 / 9, // 16:9
 
     /**
@@ -110,28 +104,11 @@ var interfaceConfig = {
      */
     MOBILE_APP_PROMO: true,
 
-    /**
-     * Specify custom URL for downloading android mobile app.
-     */
-    MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
-
-    /**
-     * Specify custom URL for downloading f droid app.
-     */
-    MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
-
-    /**
-     * Specify URL for downloading ios mobile app.
-     */
-    MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
-
-    NATIVE_APP_NAME: 'Jitsi Meet',
-
     // Names of browsers which should show a warning stating the current browser
     // has a suboptimal experience. Browsers which are not listed as optimal or
     // unsupported are considered suboptimal. Valid values are:
-    // chrome, chromium, edge, electron, firefox, nwjs, opera, safari
-    OPTIMAL_BROWSERS: [ 'chrome', 'chromium', 'firefox', 'nwjs', 'electron', 'safari' ],
+    // chrome, chromium, electron, firefox , safari, webkit
+    OPTIMAL_BROWSERS: [ 'chrome', 'chromium', 'firefox', 'electron', 'safari', 'webkit' ],
 
     POLICY_LOGO: null,
     PROVIDER_NAME: 'Jitsi',
@@ -144,7 +121,7 @@ var interfaceConfig = {
     RECENT_LIST_ENABLED: true,
     REMOTE_THUMBNAIL_RATIO: 1, // 1:1
 
-    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds' ],
+    SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar', 'sounds', 'more' ],
 
     /**
      * Specify which sharing features should be displayed. If the value is not set
@@ -161,7 +138,6 @@ var interfaceConfig = {
      */
     SHOW_CHROME_EXTENSION_BANNER: false,
 
-    SHOW_DEEP_LINKING_IMAGE: false,
     SHOW_JITSI_WATERMARK: true,
     SHOW_POWERED_BY: false,
     SHOW_PROMOTIONAL_CLOSE_PAGE: false,
@@ -202,6 +178,31 @@ var interfaceConfig = {
      */
     // TILE_VIEW_MAX_COLUMNS: 5,
 
+    // List of undocumented settings
+    /**
+     INDICATOR_FONT_SIZES
+     PHONE_NUMBER_REGEX
+    */
+
+    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
+
+    /**
+     * Specify URL for downloading ios mobile app.
+     */
+    // MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
+
+    /**
+     * Specify custom URL for downloading android mobile app.
+     */
+    // MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
+
+    /**
+     * Specify mobile app scheme for opening the app from the mobile browser.
+     */
+    // APP_SCHEME: 'org.jitsi.meet',
+
+    // NATIVE_APP_NAME: 'Jitsi Meet',
+
     /**
      * Specify Firebase dynamic link properties for the mobile apps.
      */
@@ -214,22 +215,19 @@ var interfaceConfig = {
     // },
 
     /**
-     * Specify mobile app scheme for opening the app from the mobile browser.
+     * Hide the logo on the deep linking pages.
      */
-    // APP_SCHEME: 'org.jitsi.meet',
+    // HIDE_DEEP_LINKING_LOGO: false,
 
     /**
      * Specify the Android app package name.
      */
     // ANDROID_APP_PACKAGE: 'org.jitsi.meet',
 
-    // List of undocumented settings
     /**
-     INDICATOR_FONT_SIZES
-     PHONE_NUMBER_REGEX
+     * Specify custom URL for downloading f droid app.
      */
-
-    // -----------------DEPRECATED CONFIGS BELOW THIS LINE-----------------------------
+    // MOBILE_DOWNLOAD_LINK_F_DROID: 'https://f-droid.org/en/packages/org.jitsi.meet/',
 
     // Connection indicators (
     // CONNECTION_INDICATOR_AUTO_HIDE_ENABLED,
@@ -242,12 +240,19 @@ var interfaceConfig = {
     // Please use defaultLocalDisplayName from config.js
     // DEFAULT_LOCAL_DISPLAY_NAME: 'me',
 
+    // Please use defaultLogoUrl from config.js
+    // DEFAULT_LOGO_URL: 'images/watermark.svg',
+
     // Please use defaultRemoteDisplayName from config.js
     // DEFAULT_REMOTE_DISPLAY_NAME: 'Fellow Jitster',
 
     // Moved to config.js as `toolbarConfig.initialTimeout`.
     // INITIAL_TOOLBAR_TIMEOUT: 20000,
 
+    // Please use `liveStreaming.helpLink` from config.js
+    // Documentation reference for the live streaming feature.
+    // LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live',
+
     // Moved to config.js as `toolbarConfig.alwaysVisible`.
     // TOOLBAR_ALWAYS_VISIBLE: false,
 

type/__jitsi_meet_domain/files/jitsi-version

@@ -0,0 +1 @@
+2.0.9457-1

type/__jitsi_meet_domain/files/nginx.sh

@@ -7,8 +7,36 @@ JITSI_NGINX_CONFIG="$(cat <<EOF
 #server_names_hash_bucket_size 64;
 #
 #types {
-## nginx's default mime.types doesn't include a mapping for wasm
+## nginx's default mime.types doesn't include a mapping for wasm or wav.
 #    application/wasm     wasm;
+#    audio/wav            wav;
+#}
+# These upstreams are managed by __jitsi_meet
+#upstream jicofo {
+#    zone upstreams 64K;
+#    server 127.0.0.1:8888;
+#    keepalive 2;
+#}
+#upstream prosody {
+#    zone upstreams 64K;
+#    server 127.0.0.1:5280;
+#    keepalive 2;
+#}
+#upstream jvb1 {
+#    zone upstreams 64K;
+#    server 127.0.0.1:9090;
+#    keepalive 2;
+#}
+#map \$arg_vnode \$prosody_node {
+#    default prosody;
+#    v1 v1;
+#    v2 v2;
+#    v3 v3;
+#    v4 v4;
+#    v5 v5;
+#    v6 v6;
+#    v7 v7;
+#    v8 v8;
 #}
 server {
     listen 80;
@@ -22,8 +50,8 @@ server {
     }
 }
 server {
-    listen 443 ssl;
-    listen [::]:443 ssl;
+    listen 443 ssl http2;
+    listen [::]:443 ssl http2;
     server_name ${DOMAIN};
 
     include snippets/acme-challenge.conf;
@@ -39,6 +67,10 @@ server {
 
     add_header Strict-Transport-Security "max-age=63072000" always;
     set \$prefix "";
+    # Try the custom page for this domain, fallback to default page
+    set \$custom_index "index-${DOMAIN}.html";
+    # We expect this domain to be properly configured, the file should exist
+    set \$config_js_location "/etc/jitsi/meet/${DOMAIN}-config.js";
 
     ssl_certificate /etc/letsencrypt/live/${DOMAIN}/fullchain.pem;
     ssl_certificate_key /etc/letsencrypt/live/${DOMAIN}/privkey.pem;
@@ -50,7 +82,7 @@ server {
     ssi_types application/x-javascript application/javascript;
 
     # Try the custom page for this domain, fallback to default page
-    index index-${DOMAIN}.html index.html index.htm;
+    index \$custom_index index.html index.htm;
     error_page 404 /static/404.html;
 
     gzip on;
@@ -59,9 +91,10 @@ server {
     gzip_proxied no-cache no-store private expired auth;
     gzip_min_length 512;
 
-    # We expect this domain to be properly configured, the file should exist
+    # include /etc/jitsi/meet/jaas/*.conf;
+
     location = /config.js {
-        alias /etc/jitsi/meet/${DOMAIN}-config.js;
+        alias \$config_js_location;
     }
     # We expect this domain to be properly configured, the file should exist
     location = /interface_config.js {
@@ -80,8 +113,20 @@ server {
         alias /usr/share/jitsi-meet/libs/external_api.min.js;
     }
 
+    location = /_api/room-info {
+        proxy_pass http://prosody/room-info?prefix=\$prefix&\$args;
+        proxy_http_version 1.1;
+        proxy_set_header X-Forwarded-For \$remote_addr;
+        proxy_set_header Host \$http_host;
+    }
+
+    location ~ ^/_api/public/(.*)\$ {
+        autoindex off;
+        alias /etc/jitsi/meet/public/\$1;
+    }
+
     # ensure all static content can always be found first
-    location ~ ^/(libs|css|static|images|fonts|lang|sounds|connection_optimization|.well-known)/(.*)\$
+    location ~ ^/(libs|css|static|images|fonts|lang|sounds|.well-known)/(.*)\$
     {
         add_header 'Access-Control-Allow-Origin' '*';
         alias /usr/share/jitsi-meet/\$1/\$2;
@@ -92,32 +137,48 @@ server {
         }
     }
 
+    # Paths for jsi / interpreters
+    location ~ ^/i/(img/[^./]*.png|jsi.js|style.css)$
+    {
+        add_header 'Access-Control-Allow-Origin' '*';
+        alias /opt/jsi/static/\$1;
+
+        # cache all versioned files
+        if (\$arg_v) {
+            expires 1y;
+        }
+    }
+    location ~ ^/i/
+    {
+        try_files /${DOMAIN}-interpreters.html /interpreters.html \$uri;
+    }
+
     # BOSH
     location = /http-bind {
-	# We are using 127.0.0.1, because we are not specifying a resolver
-	# otherwise nginx will fail to resolve 'localhost'
-        proxy_pass http://127.0.0.1:5280/http-bind?prefix=\$prefix&\$args;
+        proxy_pass http://prosody/http-bind?prefix=\$prefix&\$args;
+        proxy_http_version 1.1;
         proxy_set_header X-Forwarded-For \$remote_addr;
 	# Prevision for 'multi-domain' jitsi instances
 	# https://community.jitsi.org/t/same-jitsi-meet-instance-with-multiple-domain-names/17391
-        proxy_set_header Host ${JITSI_HOST};
+        proxy_set_header Host ${DOMAIN};
+        proxy_set_header Connection "";
     }
 
     # xmpp websockets
     location = /xmpp-websocket {
-        proxy_pass http://127.0.0.1:5280/xmpp-websocket?prefix=\$prefix&\$args;
+        proxy_pass http://prosody/xmpp-websocket?prefix=\$prefix&\$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade \$http_upgrade;
         proxy_set_header Connection "upgrade";
 	# Prevision for 'multi-domain' jitsi instances
 	# https://community.jitsi.org/t/same-jitsi-meet-instance-with-multiple-domain-names/17391
-        proxy_set_header Host ${JITSI_HOST};
+        proxy_set_header Host ${DOMAIN};
         tcp_nodelay on;
     }
 
     # colibri (JVB) websockets for jvb1
     location ~ ^/colibri-ws/default-id/(.*) {
-        proxy_pass http://127.0.0.1:9090/colibri-ws/default-id/\$1\$is_args\$args;
+        proxy_pass http://jvb1/colibri-ws/default-id/\$1\$is_args\$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade \$http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -133,11 +194,22 @@ server {
     #    alias /usr/share/jitsi-meet/load-test/libs/\$1;
     #}
 
+    location ~ ^/conference-request/v1([/].*)?\$ {
+        proxy_pass http://jicofo/conference-request/v1\$1;
+        add_header "Cache-Control" "no-cache, no-store";
+        add_header 'Access-Control-Allow-Origin' '*';
+    }
+    location ~ ^/([^/?&:'"]+)/conference-request/v1([/].*)?\$ {
+        rewrite ^/([^/?&:'"]+)/conference-request/v1([/].*)?\$ /conference-request/v1\$2;
+    }
+
     location ~ ^/([^/?&:'"]+)\$ {
+        set \$roomname "\$1";
         try_files \$uri @root_path;
     }
 
     location @root_path {
+        # rewrite ^/(.*)\$ /\$custom_index break;
         rewrite ^/(.*)\$ / break;
     }
 
@@ -146,9 +218,16 @@ server {
         set \$subdomain "\$1.";
         set \$subdir "\$1/";
 
-        alias /etc/jitsi/meet/jitsi-meet.example.com-config.js;
+        alias \$config_js_location;
     }
 
+    ## Matches /(TENANT)/pwa-worker.js or /(TENANT)/manifest.json to rewrite to / and look for file
+    #location ~ ^/([^/?&:'"]+)/(pwa-worker.js|manifest.json)\$ {
+    #    set \$subdomain "\$1.";
+    #    set \$subdir "\$1/";
+    #    rewrite ^/([^/?&:'"]+)/(pwa-worker.js|manifest.json)\$ /\$2;
+    #}
+
     # BOSH for subdomains
     location ~ ^/([^/?&:'"]+)/http-bind {
         set \$subdomain "\$1.";
@@ -167,6 +246,14 @@ server {
         rewrite ^/(.*)\$ /xmpp-websocket;
     }
 
+    location ~ ^/([^/?&:'"]+)/_api/room-info {
+        set \$subdomain "\$1.";
+        set \$subdir "\$1/";
+        set \$prefix "\$1";
+
+        rewrite ^/(.*)\$ /_api/room-info;
+    }
+
     # Anything that didn't match above, and isn't a real file, assume it's a room name and redirect to /
     location ~ ^/([^/?&:'"]+)/(.*)\$ {
         set \$subdomain "\$1.";

type/__jitsi_meet_domain/files/nginx.sh.orig

@@ -1,8 +1,30 @@
 server_names_hash_bucket_size 64;
 
 types {
-# nginx's default mime.types doesn't include a mapping for wasm
+# nginx's default mime.types doesn't include a mapping for wasm or wav.
     application/wasm     wasm;
+    audio/wav            wav;
+}
+upstream prosody {
+    zone upstreams 64K;
+    server 127.0.0.1:5280;
+    keepalive 2;
+}
+upstream jvb1 {
+    zone upstreams 64K;
+    server 127.0.0.1:9090;
+    keepalive 2;
+}
+map $arg_vnode $prosody_node {
+    default prosody;
+    v1 v1;
+    v2 v2;
+    v3 v3;
+    v4 v4;
+    v5 v5;
+    v6 v6;
+    v7 v7;
+    v8 v8;
 }
 server {
     listen 80;
@@ -21,8 +43,8 @@ server {
     }
 }
 server {
-    listen 443 ssl;
-    listen [::]:443 ssl;
+    listen 443 ssl http2;
+    listen [::]:443 ssl http2;
     server_name jitsi-meet.example.com;
 
     # Mozilla Guideline v5.4, nginx 1.17.7, OpenSSL 1.1.1d, intermediate configuration
@@ -36,6 +58,8 @@ server {
 
     add_header Strict-Transport-Security "max-age=63072000" always;
     set $prefix "";
+    set $custom_index "";
+    set $config_js_location /etc/jitsi/meet/jitsi-meet.example.com-config.js;
 
     ssl_certificate /etc/jitsi/meet/jitsi-meet.example.com.crt;
     ssl_certificate_key /etc/jitsi/meet/jitsi-meet.example.com.key;
@@ -55,16 +79,30 @@ server {
     gzip_proxied no-cache no-store private expired auth;
     gzip_min_length 512;
 
+    include /etc/jitsi/meet/jaas/*.conf;
+
     location = /config.js {
-        alias /etc/jitsi/meet/jitsi-meet.example.com-config.js;
+        alias $config_js_location;
     }
 
     location = /external_api.js {
         alias /usr/share/jitsi-meet/libs/external_api.min.js;
     }
 
+    location = /_api/room-info {
+        proxy_pass http://prosody/room-info?prefix=$prefix&$args;
+        proxy_http_version 1.1;
+        proxy_set_header X-Forwarded-For $remote_addr;
+        proxy_set_header Host $http_host;
+    }
+
+    location ~ ^/_api/public/(.*)$ {
+        autoindex off;
+        alias /etc/jitsi/meet/public/$1;
+    }
+
     # ensure all static content can always be found first
-    location ~ ^/(libs|css|static|images|fonts|lang|sounds|connection_optimization|.well-known)/(.*)$
+    location ~ ^/(libs|css|static|images|fonts|lang|sounds|.well-known)/(.*)$
     {
         add_header 'Access-Control-Allow-Origin' '*';
         alias /usr/share/jitsi-meet/$1/$2;
@@ -77,14 +115,16 @@ server {
 
     # BOSH
     location = /http-bind {
-        proxy_pass http://127.0.0.1:5280/http-bind?prefix=$prefix&$args;
+        proxy_pass http://$prosody_node/http-bind?prefix=$prefix&$args;
+        proxy_http_version 1.1;
         proxy_set_header X-Forwarded-For $remote_addr;
         proxy_set_header Host $http_host;
+        proxy_set_header Connection "";
     }
 
     # xmpp websockets
     location = /xmpp-websocket {
-        proxy_pass http://127.0.0.1:5280/xmpp-websocket?prefix=$prefix&$args;
+        proxy_pass http://$prosody_node/xmpp-websocket?prefix=$prefix&$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade $http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -94,7 +134,7 @@ server {
 
     # colibri (JVB) websockets for jvb1
     location ~ ^/colibri-ws/default-id/(.*) {
-        proxy_pass http://127.0.0.1:9090/colibri-ws/default-id/$1$is_args$args;
+        proxy_pass http://jvb1/colibri-ws/default-id/$1$is_args$args;
         proxy_http_version 1.1;
         proxy_set_header Upgrade $http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -110,12 +150,22 @@ server {
     #    alias /usr/share/jitsi-meet/load-test/libs/$1;
     #}
 
+    location ~ ^/conference-request/v1(\/.*)?$ {
+        proxy_pass http://127.0.0.1:8888/conference-request/v1$1;
+        add_header "Cache-Control" "no-cache, no-store";
+        add_header 'Access-Control-Allow-Origin' '*';
+    }
+    location ~ ^/([^/?&:'"]+)/conference-request/v1(\/.*)?$ {
+        rewrite ^/([^/?&:'"]+)/conference-request/v1(\/.*)?$ /conference-request/v1$2;
+    }
+
     location ~ ^/([^/?&:'"]+)$ {
+        set $roomname "$1";
         try_files $uri @root_path;
     }
 
     location @root_path {
-        rewrite ^/(.*)$ / break;
+        rewrite ^/(.*)$ /$custom_index break;
     }
 
     location ~ ^/([^/?&:'"]+)/config.js$
@@ -123,7 +173,14 @@ server {
         set $subdomain "$1.";
         set $subdir "$1/";
 
-        alias /etc/jitsi/meet/jitsi-meet.example.com-config.js;
+        alias $config_js_location;
+    }
+
+    # Matches /(TENANT)/pwa-worker.js or /(TENANT)/manifest.json to rewrite to / and look for file
+    location ~ ^/([^/?&:'"]+)/(pwa-worker.js|manifest.json)$ {
+        set $subdomain "$1.";
+        set $subdir "$1/";
+        rewrite ^/([^/?&:'"]+)/(pwa-worker.js|manifest.json)$ /$2;
     }
 
     # BOSH for subdomains
@@ -144,6 +201,14 @@ server {
         rewrite ^/(.*)$ /xmpp-websocket;
     }
 
+    location ~ ^/([^/?&:'"]+)/_api/room-info {
+        set $subdomain "$1.";
+        set $subdir "$1/";
+        set $prefix "$1";
+
+        rewrite ^/(.*)$ /_api/room-info;
+    }
+
     # Anything that didn't match above, and isn't a real file, assume it's a room name and redirect to /
     location ~ ^/([^/?&:'"]+)/(.*)$ {
         set $subdomain "$1.";

type/__jitsi_meet_domain/files/prosody.cfg.lua.sh

@@ -0,0 +1,223 @@
+#!/bin/sh -eu
+
+# Source:
+# https://github.com/jitsi/jitsi-meet/blob/master/doc/debian/jitsi-meet-prosody/prosody.cfg.lua-jvb.example
+FOCUS_USER="focus"
+JITSI_DOMAIN="${JITSI_DOMAIN:-${JITSI_HOST:?}}"
+# PROSODY_MAIN_CONFIG: defined in __jitsi_meet, empty in __jitsi_meet_domain
+PROSODY_SECUREDOMAIN_START="--[["
+PROSODY_SECUREDOMAIN_END="--]]"
+if [ -n "${PROSODY_MAIN_CONFIG}" ]; then
+	PROSODY_MAIN_START=""
+	PROSODY_MAIN_END=""
+	PROSODY_DOMAIN_START="--[["
+	PROSODY_DOMAIN_END="--]]"
+else
+	PROSODY_MAIN_START="--[["
+	PROSODY_MAIN_END="--]]"
+	PROSODY_DOMAIN_START=""
+	PROSODY_DOMAIN_END=""
+	if [ -n "${SECURED_DOMAINS}" ]; then
+		PROSODY_SECUREDOMAIN_START=""
+		PROSODY_SECUREDOMAIN_END=""
+	fi
+fi
+# Websockets haven't been fully tested in this type and don't work reliably
+PROSODY_WEBSOCKET="-- "
+
+# shellcheck disable=SC2034  # This is intended to be included
+PROSODY_CONFIG="$(cat <<EOFPROSODY
+-- Managed remotely, changes will be lost
+${PROSODY_MAIN_START}
+-- This will be managed by __jitsi_meet
+plugin_paths = { "/usr/share/jitsi-meet/prosody-plugins/" }
+
+-- domain mapper options, must at least have domain base set to use the mapper
+muc_mapper_domain_base = "${JITSI_HOST:?}";
+
+external_service_secret = "${TURN_SECRET:-TurnSecret}";
+external_services = {
+     { type = "stun", host = "${JITSI_HOST:?}", port = 3478 },
+     { type = "turn", host = "${JITSI_HOST:?}", port = 3478, transport = "udp", secret = true, ttl = 86400, algorithm = "turn" },
+     { type = "turns", host = "${JITSI_HOST:?}", port = 5349, transport = "tcp", secret = true, ttl = 86400, algorithm = "turn" }
+};
+
+cross_domain_bosh = false;
+consider_bosh_secure = true;
+-- Use websockets
+-- https://community.jitsi.org/t/how-to-how-to-enable-websockets-xmpp-websocket-and-smacks-for-prosody/87920
+${PROSODY_WEBSOCKET}consider_websocket_secure = true;
+
+-- https_ports = { }; -- Remove this line to prevent listening on port 5284
+
+-- by default prosody 0.12 sends cors headers, if you want to disable it uncomment the following (the config is available on 0.12.1)
+--http_cors_override = {
+--    bosh = {
+--        enabled = false;
+--    };
+--    websocket = {
+--        enabled = false;
+--    };
+--}
+
+-- https://ssl-config.mozilla.org/#server=haproxy&version=2.1&config=intermediate&openssl=1.1.0g&guideline=5.4
+ssl = {
+    protocol = "tlsv1_2+";
+    ciphers = "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
+}
+
+unlimited_jids = {
+    "${FOCUS_USER:?}@auth.${JITSI_HOST:?}",
+    "jvb@auth.${JITSI_HOST:?}"
+}
+${PROSODY_MAIN_END}
+
+${PROSODY_DOMAIN_START}
+-- This will be managed by __jitsi_meet_domain
+VirtualHost "${JITSI_DOMAIN:?}"
+    authentication = "jitsi-anonymous" -- do not delete me
+    -- Properties below are modified by jitsi-meet-tokens package config
+    -- and authentication above is switched to "token"
+    --app_id="example_app_id"
+    --app_secret="example_app_secret"
+    -- Assign this host a certificate for TLS, otherwise it would use the one
+    -- set in the global section (if any).
+    -- Note that old-style SSL on port 5223 only supports one certificate, and will always
+    -- use the global one.
+    ssl = {
+        key = "/etc/prosody/certs/${JITSI_DOMAIN:?}.key";
+        certificate = "/etc/prosody/certs/${JITSI_DOMAIN:?}.crt";
+    }
+    av_moderation_component = "avmoderation.${JITSI_DOMAIN:?}"
+    speakerstats_component = "speakerstats.${JITSI_DOMAIN:?}"
+    end_conference_component = "endconference.${JITSI_DOMAIN:?}"
+    -- we need bosh
+    modules_enabled = {
+        "bosh";
+        "ping"; -- Enable mod_ping
+        "speakerstats";
+        "external_services";
+        "conference_duration";
+        "end_conference";
+        "muc_lobby_rooms";
+        "muc_breakout_rooms";
+        "av_moderation";
+        "room_metadata";
+${PROSODY_WEBSOCKET}        "websocket";
+${PROSODY_WEBSOCKET}        "smacks";
+    }
+    smacks_max_unacked_stanzas = 5;
+    smacks_hibernation_time = 60;
+    smacks_max_hibernated_sessions = 1;
+    smacks_max_old_sessions = 1;
+    c2s_require_encryption = false
+    lobby_muc = "lobby.${JITSI_DOMAIN:?}"
+    breakout_rooms_muc = "breakout.${JITSI_DOMAIN:?}"
+    room_metadata_component = "metadata.${JITSI_DOMAIN:?}"
+    main_muc = "conference.${JITSI_DOMAIN:?}"
+    -- muc_lobby_whitelist = { "recorder.${JITSI_DOMAIN:?}" } -- Here we can whitelist jibri to enter lobby enabled rooms
+
+Component "conference.${JITSI_DOMAIN:?}" "muc"
+    restrict_room_creation = true
+    storage = "memory"
+    modules_enabled = {
+        "muc_hide_all";
+        "muc_meeting_id";
+        "muc_domain_mapper";
+        "polls";
+        --"token_verification";
+        "muc_rate_limit";
+        "muc_password_whitelist";
+    }
+    admins = { "${FOCUS_USER:?}@auth.${JITSI_HOST:?}" }
+    muc_password_whitelist = {
+        "${FOCUS_USER:?}@auth.${JITSI_HOST:?}"
+    }
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+
+Component "breakout.${JITSI_DOMAIN:?}" "muc"
+    restrict_room_creation = true
+    storage = "memory"
+    modules_enabled = {
+        "muc_hide_all";
+        "muc_meeting_id";
+        "muc_domain_mapper";
+        "muc_rate_limit";
+        "polls";
+    }
+    admins = { "${FOCUS_USER:?}@auth.${JITSI_HOST:?}" }
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+
+-- internal muc component
+Component "internal.auth.${JITSI_DOMAIN:?}" "muc"
+    storage = "memory"
+    modules_enabled = {
+        "muc_hide_all";
+        "ping";
+    }
+    admins = { "${FOCUS_USER:?}@auth.${JITSI_HOST:?}", "jvb@auth.${JITSI_HOST:?}" }
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+    -- https://prosody.im/doc/modules/mod_muc
+    muc_room_cache_size = 1000
+${PROSODY_DOMAIN_END}
+${PROSODY_MAIN_START}
+-- This will be managed by __jitsi_meet
+
+VirtualHost "auth.${JITSI_DOMAIN:?}"
+    ssl = {
+       key = "/etc/prosody/certs/auth.${JITSI_DOMAIN:?}.key";
+       certificate = "/etc/prosody/certs/auth.${JITSI_DOMAIN:?}.crt";
+    }
+
+    modules_enabled = {
+        "limits_exception";
+    }
+    authentication = "internal_hashed"
+${PROSODY_MAIN_END}
+${PROSODY_DOMAIN_START}
+-- This will be managed by __jitsi_meet_domain
+
+-- Proxy to jicofo's user JID, so that it doesn't have to register as a component.
+Component "focus.${JITSI_DOMAIN:?}" "client_proxy"
+    -- Single focus user for the whole instance
+    target_address = "${FOCUS_USER:?}@auth.${JITSI_HOST:?}"
+
+Component "speakerstats.${JITSI_DOMAIN:?}" "speakerstats_component"
+    muc_component = "conference.${JITSI_DOMAIN:?}"
+
+Component "endconference.${JITSI_DOMAIN:?}" "end_conference"
+    muc_component = "conference.${JITSI_DOMAIN:?}"
+
+Component "avmoderation.${JITSI_DOMAIN:?}" "av_moderation_component"
+    muc_component = "conference.${JITSI_DOMAIN:?}"
+
+Component "lobby.${JITSI_DOMAIN:?}" "muc"
+    storage = "memory"
+    restrict_room_creation = true
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+    modules_enabled = {
+        "muc_hide_all";
+        "muc_rate_limit";
+        "polls";
+    }
+
+Component "metadata.${JITSI_DOMAIN:?}" "room_metadata_component"
+    muc_component = "conference.${JITSI_DOMAIN:?}"
+    breakout_rooms_component = "breakout.${JITSI_DOMAIN:?}"
+${PROSODY_DOMAIN_END}
+
+${PROSODY_SECUREDOMAIN_START}
+-- Only used on secured domains
+VirtualHost "${JITSI_DOMAIN}"
+    authentication = "internal_plain"
+
+VirtualHost "guest.${JITSI_DOMAIN}"
+    authentication = "anonymous"
+    c2s_require_encryption = false
+${PROSODY_SECUREDOMAIN_END}
+EOFPROSODY
+)"

type/__jitsi_meet_domain/files/prosody.cfg.lua.sh.orig

@@ -0,0 +1,151 @@
+plugin_paths = { "/usr/share/jitsi-meet/prosody-plugins/" }
+
+-- domain mapper options, must at least have domain base set to use the mapper
+muc_mapper_domain_base = "jitmeet.example.com";
+
+external_service_secret = "__turnSecret__";
+external_services = {
+     { type = "stun", host = "jitmeet.example.com", port = 3478 },
+     { type = "turn", host = "jitmeet.example.com", port = 3478, transport = "udp", secret = true, ttl = 86400, algorithm = "turn" },
+     { type = "turns", host = "jitmeet.example.com", port = 5349, transport = "tcp", secret = true, ttl = 86400, algorithm = "turn" }
+};
+
+cross_domain_bosh = false;
+consider_bosh_secure = true;
+-- https_ports = { }; -- Remove this line to prevent listening on port 5284
+
+-- by default prosody 0.12 sends cors headers, if you want to disable it uncomment the following (the config is available on 0.12.1)
+--http_cors_override = {
+--    bosh = {
+--        enabled = false;
+--    };
+--    websocket = {
+--        enabled = false;
+--    };
+--}
+
+-- https://ssl-config.mozilla.org/#server=haproxy&version=2.1&config=intermediate&openssl=1.1.0g&guideline=5.4
+ssl = {
+    protocol = "tlsv1_2+";
+    ciphers = "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
+}
+
+unlimited_jids = {
+    "focusUser@auth.jitmeet.example.com",
+    "jvb@auth.jitmeet.example.com"
+}
+
+VirtualHost "jitmeet.example.com"
+    authentication = "jitsi-anonymous" -- do not delete me
+    -- Properties below are modified by jitsi-meet-tokens package config
+    -- and authentication above is switched to "token"
+    --app_id="example_app_id"
+    --app_secret="example_app_secret"
+    -- Assign this host a certificate for TLS, otherwise it would use the one
+    -- set in the global section (if any).
+    -- Note that old-style SSL on port 5223 only supports one certificate, and will always
+    -- use the global one.
+    ssl = {
+        key = "/etc/prosody/certs/jitmeet.example.com.key";
+        certificate = "/etc/prosody/certs/jitmeet.example.com.crt";
+    }
+    av_moderation_component = "avmoderation.jitmeet.example.com"
+    speakerstats_component = "speakerstats.jitmeet.example.com"
+    end_conference_component = "endconference.jitmeet.example.com"
+    -- we need bosh
+    modules_enabled = {
+        "bosh";
+        "ping"; -- Enable mod_ping
+        "speakerstats";
+        "external_services";
+        "conference_duration";
+        "end_conference";
+        "muc_lobby_rooms";
+        "muc_breakout_rooms";
+        "av_moderation";
+        "room_metadata";
+    }
+    c2s_require_encryption = false
+    lobby_muc = "lobby.jitmeet.example.com"
+    breakout_rooms_muc = "breakout.jitmeet.example.com"
+    room_metadata_component = "metadata.jitmeet.example.com"
+    main_muc = "conference.jitmeet.example.com"
+    -- muc_lobby_whitelist = { "recorder.jitmeet.example.com" } -- Here we can whitelist jibri to enter lobby enabled rooms
+
+Component "conference.jitmeet.example.com" "muc"
+    restrict_room_creation = true
+    storage = "memory"
+    modules_enabled = {
+        "muc_hide_all";
+        "muc_meeting_id";
+        "muc_domain_mapper";
+        "polls";
+        --"token_verification";
+        "muc_rate_limit";
+        "muc_password_whitelist";
+    }
+    admins = { "focusUser@auth.jitmeet.example.com" }
+    muc_password_whitelist = {
+        "focusUser@auth.jitmeet.example.com"
+    }
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+
+Component "breakout.jitmeet.example.com" "muc"
+    restrict_room_creation = true
+    storage = "memory"
+    modules_enabled = {
+        "muc_hide_all";
+        "muc_meeting_id";
+        "muc_domain_mapper";
+        "muc_rate_limit";
+        "polls";
+    }
+    admins = { "focusUser@auth.jitmeet.example.com" }
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+
+-- internal muc component
+Component "internal.auth.jitmeet.example.com" "muc"
+    storage = "memory"
+    modules_enabled = {
+        "muc_hide_all";
+        "ping";
+    }
+    admins = { "focusUser@auth.jitmeet.example.com", "jvb@auth.jitmeet.example.com" }
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+
+VirtualHost "auth.jitmeet.example.com"
+    modules_enabled = {
+        "limits_exception";
+    }
+    authentication = "internal_hashed"
+
+-- Proxy to jicofo's user JID, so that it doesn't have to register as a component.
+Component "focus.jitmeet.example.com" "client_proxy"
+    target_address = "focusUser@auth.jitmeet.example.com"
+
+Component "speakerstats.jitmeet.example.com" "speakerstats_component"
+    muc_component = "conference.jitmeet.example.com"
+
+Component "endconference.jitmeet.example.com" "end_conference"
+    muc_component = "conference.jitmeet.example.com"
+
+Component "avmoderation.jitmeet.example.com" "av_moderation_component"
+    muc_component = "conference.jitmeet.example.com"
+
+Component "lobby.jitmeet.example.com" "muc"
+    storage = "memory"
+    restrict_room_creation = true
+    muc_room_locking = false
+    muc_room_default_public_jids = true
+    modules_enabled = {
+        "muc_hide_all";
+        "muc_rate_limit";
+        "polls";
+    }
+
+Component "metadata.jitmeet.example.com" "room_metadata_component"
+    muc_component = "conference.jitmeet.example.com"
+    breakout_rooms_component = "breakout.jitmeet.example.com"

type/__jitsi_meet_domain/man.rst

@@ -11,14 +11,24 @@ DESCRIPTION
 -----------
 This type installs and configures the frontend for Jitsi-Meet.
 
-This supports "multi-domain" installations, notice that in such a setup, all
-rooms are shared across the different URLs, e.g.
-https://jitsi1.example.org/room1 and https://jitsi2.example.org/room1 are
-equivalent.
+Additionally to regular Jitsi-Meet, users can load `DOMAIN/i/` and
+`DOMAIN/i/ROOM` for an interpreter-enabled interface; this is done with a
+patched version of Jitsi Simultaneous Interpretation (jsi; see references).
+At least a user with `interpreter` in their name must be present.
+
+
+This type supports "multi-domain" installations.
+
+New in April 2022: rooms are independent for each domain, that is:
+https://jitsi1.example.org/room1 and https://jitsi2.example.org/room1 are
+different rooms.
+Note however, that right now if using secured domains, users are still shared
+across any domains hosted in the same instance.
+One way to work around that could be to run multiple jicofos, but we do not
+want to bloat the servers.
+A better way is to patch jicofo, get in touch with the type authors if you want
+the gory details.
 
-This is due to the underlying XMPP and signaling rooms being common.
-There might be a way to perform tricks on the Nginx-side to avoid this, but
-time is lacking :-).
 
 This assumes `__jitsi_meet` has already been ran on the target host, and,
 amongst others, that Jitsi was set up with `__target_host` as the Jitsi domain.
@@ -41,6 +51,11 @@ admin-email
 
 OPTIONAL PARAMETERS
 -------------------
+analytics-settings
+    This goes inside the `analytics` part of `config.js`.
+    Defaults to: `disabled: true`.
+    See: https://github.com/jitsi/jitsi-meet/blob/master/config.js
+
 channel-last-n
     Default value for the "last N" attribute.
     Defaults to 20. Set to -1 for unlimited.
@@ -78,6 +93,15 @@ video-constraints
     It must not have a trailing comma, see `constraints` in
     `__jitsi_meet_domain/files/config.js.sh`.
 
+branding-app-name
+    This will change `Jitsi Meet` in many places to the brand you desire.
+    Defaults to `Jitsi Meet`.
+
+branding-extra-body
+    This must be valid HTML, it will be included server-side and delivered to
+    clients alongside the default `index.html`.
+    This is useful if you would rather not replace the whole `index`, but
+    still want the chance to do some heavier branding / add instructions / etc.
 
 branding-json
     Path to a JSON file that will be served as the `dynamicBrandingUrl`.
@@ -85,14 +109,12 @@ branding-json
     `__jitsi_meet_domain/files/config.js.sh`.
     If not set, no branding will be set up.
 
-
 branding-index
     Path to an HTML file that will be served instead of Jitsi-Meet's default
     one.
     If not set, the default index file will be used.
     If set to `-`, the type's standard input will be used.
 
-
 branding-watermark
     Path to a png file that will be served instead of Jitsi-Meet's default
     one.
@@ -147,6 +169,7 @@ SEE ALSO
 --------
 - `__jitsi_meet(7)`
 - `__jitsi_meet_user(7)`
+- Jitsi Meet Simultaneous Interpretation: https://gitlab.com/mfmt/jsi
 
 
 AUTHORS

type/__jitsi_meet_domain/manifest

@@ -18,6 +18,8 @@ NOTICE_MESSAGE="$(cat "${__object}/parameter/notice-message")"
 START_VIDEO_MUTED="$(cat "${__object}/parameter/start-video-muted")"
 TURN_SERVER="$(cat "${__object}/parameter/turn-server")"
 VIDEO_CONSTRAINTS="$(cat "${__object}/parameter/video-constraints")"
+ANALYTICS_SETTINGS="$(cat "${__object}/parameter/analytics-settings")"
+BRANDING_APP_NAME="$(cat "${__object}/parameter/branding-app-name")"
 BRANDING_INDEX="$(cat "${__object}/parameter/branding-index")"
 BRANDING_JSON="$(cat "${__object}/parameter/branding-json")"
 BRANDING_WATERMARK="$(cat "${__object}/parameter/branding-watermark")"
@@ -130,3 +132,43 @@ __file "/usr/share/jitsi-meet/images/watermark-${DOMAIN}.png" \
 	--mode 0644 \
 	--state "$(_var_state "${BRANDING_WATERMARK}")" \
 	--source "${BRANDING_WATERMARK}"
+# Simple body customisation
+__file "/usr/share/jitsi-meet/body-${DOMAIN}.html" \
+	--mode 0644 \
+	--state "$(_var_state "${STATE}")" \
+	--source "${__object}/parameter/branding-extra-body"
+
+#
+# Take care of prosody settings for the domain
+#
+JITSI_DOMAIN="${DOMAIN}"
+# Prosody settings for common components (jvb, focus, ...)
+# shellcheck source=type/__jitsi_meet_domain/files/prosody.cfg.lua.sh
+. "${__type}/files/prosody.cfg.lua.sh"  # This defines PROSODY_CONFIG
+__file "/etc/prosody/conf.avail/${DOMAIN}.cfg.lua" \
+	--group prosody \
+	--mode 0440 \
+	--state "${STATE}" \
+	--source '-' <<EOF
+${PROSODY_CONFIG}
+EOF
+__link "/etc/prosody/conf.d/${DOMAIN}.cfg.lua" \
+	--source "/etc/prosody/conf.avail/${DOMAIN}.cfg.lua" \
+	--state "${STATE}" \
+	--type symbolic
+
+if [ "${STATE}" = "present" ]; then
+	export require="${require} __file/etc/prosody/conf.avail/${DOMAIN}.cfg.lua __link/etc/prosody/conf.d/${DOMAIN}.cfg.lua"
+	__check_messages "prosody/${DOMAIN}" \
+		--pattern '^(__file|__link)/etc/prosody/conf[.](avail|d)/' \
+		--execute "$(cat <<EOF
+if [ ! -f "/var/lib/prosody/${DOMAIN}.crt" ]; then
+	echo | prosodyctl cert generate '${DOMAIN}';
+	ln -sf '/var/lib/prosody/${DOMAIN}.key' '/etc/prosody/certs/${DOMAIN}.key'
+	ln -sf '/var/lib/prosody/${DOMAIN}.crt' '/etc/prosody/certs/${DOMAIN}.crt'
+fi
+# Surprisingly, a reload is not enough
+service prosody restart
+EOF
+)"
+fi

type/__jitsi_meet_domain/parameter/default/analytics-settings

@@ -0,0 +1 @@
+        disabled: true

type/__jitsi_meet_domain/parameter/default/branding-app-name

@@ -0,0 +1 @@
+Jitsi Meet

type/__jitsi_meet_domain/parameter/optional

@@ -1,10 +1,13 @@
+analytics-settings
 channel-last-n
 default-language
 notice-message
 start-video-muted
 turn-server
 video-constraints
+branding-app-name
 branding-json
 branding-index
+branding-extra-body
 branding-watermark
 state

type/__opendkim/man.rst

@@ -41,21 +41,25 @@ subdomains
 umask
   Set the umask for the socket and PID file.
 
-userid
-  Change the user the opendkim program is to run as.
-  By default, Alpine Linux's OpenRC service will set this to `opendkim` on the
-  command-line and FreeBSD's rc will set it to `mailnull`.
-
 custom-config
   The string following this parameter is appended as-is in the configuration, to
   enable more complex configurations.
 
+
 BOOLEAN PARAMETERS
 ------------------
 syslog
   Log to syslog.
 
 
+DEPRECATED PARAMETERS
+---------------------
+userid
+  Change the user the opendkim program is to run as.
+  By default, Alpine Linux's OpenRC service will set this to `opendkim` on the
+  command-line and FreeBSD's rc will set it to `mailnull`.
+
+
 EXAMPLES
 --------
 

type/__opendkim/manifest

@@ -29,6 +29,7 @@ case "$os" in
 'freebsd')
 	CFG_DIR="/usr/local/etc/mail"
 	service="milter-opendkim"
+	start_service="milteropendkim"
 	;;
 *)
 	printf "__opendkim does not yet support %s.\n" "$os" >&2
@@ -90,7 +91,11 @@ fi
 require="__package/opendkim" __file "$target_file" \
 	--source "$source_file" --mode 0644
 
-require="__package/opendkim" __start_on_boot "${service}"
+# Due to the way rc.conf works on *BSD, we find ourselves in the awkward
+# situation, where a service's name can contain a '-' symbol, but the
+# rc.conf setting to enable a service at boot cannot.
+# Unless start_service has been defined before, these two match.
+require="__package/opendkim" __start_on_boot "${start_service:-${service}}"
 
 # Ensure Key and Signing tables exist and have proper permissions
 key_table="${CFG_DIR}/KeyTable"
@@ -105,7 +110,7 @@ require="__package/opendkim" \
 	--mode 444
 
 require="__file${target_file} __file${key_table}
-		__file${signing_table} __start_on_boot/${service}" \
+		__file${signing_table} __start_on_boot/${start_service:-${service}}" \
 	__check_messages opendkim \
 		--pattern "^__file${target_file}" \
 		--execute "service ${service} restart"

type/__opendkim/parameter/deprecated/userid

@@ -0,0 +1,2 @@
+This can cause inconsistencies with permissions and will stop being supported.
+If you still need this, you can use --custom-config 'UserId $USERID'.

type/__opendkim_genkey/explorer/key-state

@@ -0,0 +1,32 @@
+#!/bin/sh -e
+DIRECTORY="/var/db/dkim/"
+if [ -f "${__object:?}/parameter/directory" ];
+then
+	# Be forgiving about a lack of trailing slash
+	DIRECTORY="$(sed -E 's!([^/])$!\1/!' < "${__object:?}/parameter/directory")"
+fi
+
+
+KEY_ID="$(echo "${__object_id:?)}" | tr '/' '_')"
+DEFAULT_PATH="${DIRECTORY:?}${KEY_ID:?}.private"
+if [ -s "${DEFAULT_PATH}" ]; then
+	# This is the main location for the key
+	FOUND_PATH="${DEFAULT_PATH}"
+else
+	# This is a backwards-compatible location for the key
+	# Keys generated post March 2022 should not land here
+	if [ -f "${__object:?}/parameter/selector" ]; then
+		SELECTOR="$(cat "${__object:?}/parameter/selector")"
+		if [ -s "${DIRECTORY}${SELECTOR:?}.private" ]; then
+			FOUND_PATH="${DIRECTORY}${SELECTOR:?}.private"
+		fi
+	fi
+fi
+
+if [ -n "${FOUND_PATH}" ]; then
+	printf "present\t%s" "${FOUND_PATH}"
+else
+	# We didn't find the key
+	# We pass the default path here, to easen logic in the rest of the type
+	printf "absent\t%s" "${DEFAULT_PATH}"
+fi

type/__opendkim_genkey/gencode-remote

@@ -19,8 +19,8 @@
 #
 
 # Required parameters
-DOMAIN="$(cat "${__object:?}/parameter/domain")"
-SELECTOR="$(cat "${__object:?}/parameter/selector")"
+DOMAIN="$(cat "${__object:?}/domain")"
+SELECTOR="$(cat "${__object:?}/selector")"
 
 # Optional parameters
 BITS=
@@ -28,12 +28,6 @@ if [ -f "${__object:?}/parameter/bits" ]; then
 	BITS="-b $(cat "${__object:?}/parameter/bits")"
 fi
 
-DIRECTORY="/var/db/dkim/"
-if [ -f "${__object:?}/parameter/directory" ]; then
-	# Be forgiving about a lack of trailing slash
-	DIRECTORY="$(sed -E 's!([^/])$!\1/!' < "${__object:?}/parameter/directory")"
-fi
-
 # Boolean parameters
 SUBDOMAINS=
 if [ -f "${__object:?}/parameter/no-subdomains" ]; then
@@ -48,9 +42,24 @@ fi
 user="$(cat "${__object:?}/user")"
 group="$(cat "${__object:?}/group")"
 
-if ! [ -f "${DIRECTORY}${SELECTOR}.private" ]; then
-	echo "opendkim-genkey $BITS --domain=$DOMAIN --directory=$DIRECTORY $RESTRICTED --selector=$SELECTOR $SUBDOMAINS"
-	echo "chown ${user}:${group} ${DIRECTORY}${SELECTOR}.private"
+KEY_STATE="$(cut -f 1 "${__object:?}/explorer/key-state")"
+KEY_LOCATION="$(cut -f 2- "${__object:?}/explorer/key-state")"
+
+if [ "${KEY_STATE:?}" = "absent" ]; then
+	# opendkim-genkey(8) does not allow specifying the file name.
+	# To err on the safe side (and avoid potentially killing other keys)
+	# we operate on a temporary directory first, then move the resulting key
+	cat <<-EOF
+	tmp_dir="\$(mktemp -d cdist-dkim.XXXXXXXXXXX)"
+	opendkim-genkey $BITS --domain=${DOMAIN:?} --directory=\${tmp_dir:?} $RESTRICTED --selector=${SELECTOR:?} $SUBDOMAINS
+	# Relocate and ensure permissions
+	mv "\${tmp_dir:?}/${SELECTOR:?}.private" '${KEY_LOCATION:?}'
+	chown ${user}:${group} '${KEY_LOCATION}'
+	chmod 0600 '${KEY_LOCATION}'
 	# This is usually generated, if it weren't we do not want to fail
-	echo "chown ${user}:${group} ${DIRECTORY}${SELECTOR}.txt || true"
+	mv "\${tmp_dir:?}/${SELECTOR:?}.txt" '${KEY_LOCATION%.private}.txt' || true
+	chown ${user}:${group} '${KEY_LOCATION%.private}.txt' || true
+	# Cleanup after ourselves
+	rmdir "\${tmp_dir:?}" || true
+	EOF
 fi

type/__opendkim_genkey/man.rst

@@ -10,23 +10,27 @@ DESCRIPTION
 -----------
 
 This type uses the `opendkim-genkey(8)` to generate signing keys suitable for
-usage by `opendkim(8)` to sign outgoing emails. Then, a line with the domain,
-selector and keyname in the `$selector._domainkey.$domain` format will be added
-to the OpenDKIM key table located at `/etc/opendkim/KeyTable`. Finally, a line
-will be added to the OpenDKIM signing table, using either the domain or the
-provided key for the `domain:selector:keyfile` value in the table. An existing
-key will not be overwritten.
+usage by `opendkim(8)` to sign outgoing emails.
+
+It also manages the key, identified by its `$__object_id` in OpenDKIM's
+KeyTable and sets its `s=` and `d=` parameters (see: `--selector` and
+`--sigdomain` respectively).
+
+This type will also manage the entries in the OpenDKIM's SigningTable by
+associating any given `sigkey` values to this key.
+
+Take into account that if you use this type without the `--domain` and
+`--selector` parameters, the `$__object_id` must be in form `$domain/$selector`.
 
 Currently, this type is only implemented for Alpine Linux and FreeBSD.
 Please contribute an implementation if you can.
 
-REQUIRED PARAMETERS
--------------------
-domain
-  The domain to generate the key for.
-
-selector
-  The DKIM selector to generate the key for.
+NOTE: the name of the key file under `--directory` will default to
+`$__object_id.private`, but if that fails and `--selector` is used,
+`SELECTOR.private` will be considered.
+Take care when using unrelated keys that might collide this way.
+For more information see:
+https://code.ungleich.ch/ungleich-public/cdist-contrib/issues/20
 
 
 OPTIONAL PARAMETERS
@@ -38,10 +42,36 @@ bits
 directory
   The directory in which to generate the key, `/var/db/dkim/` by default.
 
+domain
+  The domain to generate the key for.
+  If omitted, `--selector` must be omitted as well and `$__object_id` must be
+  in form: `$domain/$selector`.
+
+selector
+  The DKIM selector to generate the key for.
+  If omitted, `--domain` must be omitted as well and `$__object_id` must be
+  in form: `$domain/$selector`.
+
+sigdomain
+  Specified in the KeyTable, the domain to use in the signature's "d=" value.
+  Defaults to the specified domain. If `%`, it will be replaced by the apparent
+  domain of the sender when generating a signature.
+  Note you probably don't want to set both `--sigdomain` and `--sigkey` to `%`.
+  See `KeyTable` in `opendkim.conf(5)` for more information.
+
+
+OPTIONAL MULTIPLE PARAMETERS
+----------------------------
 sigkey
-  The key used in the SigningTable for this signing key. Defaults to the
+  The key used in the `SigningTable` for this signing key. Defaults to the
   specified domain. If `%`, OpenDKIM will replace it with the domain found
   in the `From:` header. See `opendkim.conf(5)` for more options.
+  Note you probably don't want to set both `--sigdomain` and `--sigkey` to `%`.
+  This can be passed multiple times, resulting in multiple lines in the
+  SigningTable, which can be used to support signing of subdomains or multiple
+  domains with the same key; in that case, you probably want to set
+  `--sigdomain` to `%`, else the domains will not be aligned.
+
 
 BOOLEAN PARAMETERS
 ------------------
@@ -57,6 +87,7 @@ EXAMPLES
 
 .. code-block:: sh
 
+    # Setup the OpenDKIM service
     __opendkim \
         --socket inet:8891@localhost \
         --basedir /var/lib/opendkim \
@@ -65,14 +96,24 @@ EXAMPLES
         --umask 002 \
         --syslog
 
-    require='__opendkim' \
+    # Continue only after the service has been set up
+    export require="__opendkim"
+
+    # Generate a key for 'example.com' with selector 'default'
     __opendkim_genkey default \
         --domain example.com \
         --selector default
 
-        __opendkim_genkey myfoo \
-                --domain foo.com \
-                --selector backup
+    # Generate a key for 'foo.com' with selector 'backup'
+    __opendkim_genkey 'foo.com/backup'
+
+    # Generate a key for 'example.org' with selector 'main'
+    # that can also sign 'cdi.st' and subdomains of 'example.org'
+    __opendkim_genkey 'example.org/main' \
+        --sigdomain '%' \
+        --sigkey 'example.org' \
+        --sigkey '.example.org' \
+        --sigkey 'cdi.st'
 
 
 SEE ALSO

type/__opendkim_genkey/manifest

@@ -35,17 +35,48 @@ case "$os" in
 ;;
 *)
 	cat <<- EOF >&2
-	__opendkim_genkey currently only supports Alpine Linux. Please
-	contribute an implementation for $os if you can.
+	__opendkim_genkey currently only supports Alpine Linux and FreeBSD.
+	Please contribute an implementation for $os if you can.
 	EOF
+	exit 1
 ;;
 esac
-# Persist user and group for gencode-remote
-printf '%s' "${user}" > "${__object:?}/user"
-printf '%s' "${group}" > "${__object:?}/group"
 
-SELECTOR="$(cat "${__object:?}/parameter/selector")"
-DOMAIN="$(cat "${__object:?}/parameter/domain")"
+# Logic to simplify the type as documented in
+# https://code.ungleich.ch/ungleich-public/cdist-contrib/issues/20#issuecomment-14711
+DOMAIN="$(cat "${__object:?}/parameter/domain" 2>/dev/null || true)"
+SELECTOR="$(cat "${__object:?}/parameter/selector" 2>/dev/null || true)"
+if [ -z "${DOMAIN}${SELECTOR}" ]; then
+	# Neither SELECTOR nor DOMAIN were passed, try to use __object_id
+	if echo "${__object_id:?}" | \
+			grep -qE '^[^/[:space:]]+/[^/[:space:]]+$'; then
+		# __object_id matches, let's get the data
+		DOMAIN="$(echo "${__object_id:?}" | cut -d '/' -f 1)"
+		SELECTOR="$(echo "${__object_id:?}" | cut -d '/' -f 2)"
+	else
+		# It doesn't match the pattern, this is sad
+		cat <<- EOF >&2
+		The arguments --domain and --selector were not used.
+		So __object_id must match DOMAIN/SELECTOR.
+		But instead the type got: ${__object_id:?}
+		EOF
+		exit 1
+	fi
+elif [ -z "${DOMAIN}" ] || [ -z "${SELECTOR}" ]; then
+	# Only one was passed, this is sad :-(
+	cat <<- EOF >&2
+	You must pass either both --selector and --domain or none of them.
+	If these arguments are absent, __object_id must match: DOMAIN/SELECTOR.
+	EOF
+	exit 1
+# else: both were passed
+fi
+
+# Persist data for gencode-remote
+printf '%s' "${user:?}" > "${__object:?}/user"
+printf '%s' "${group:?}" > "${__object:?}/group"
+printf '%s' "${DOMAIN:?}" > "${__object:?}/domain"
+printf '%s' "${SELECTOR:?}" > "${__object:?}/selector"
 
 DIRECTORY="/var/db/dkim/"
 if [ -f "${__object:?}/parameter/directory" ];
@@ -59,6 +90,11 @@ if [ -f "${__object:?}/parameter/sigkey" ];
 then
 	SIGKEY="$(cat "${__object:?}/parameter/sigkey")"
 fi
+SIGDOMAIN="${DOMAIN:?}"
+if [ -f "${__object:?}/parameter/sigdomain" ];
+then
+	SIGDOMAIN="$(cat "${__object:?}/parameter/sigdomain")"
+fi
 
 # Ensure the key-container directory exists with the proper permissions
 __directory "${DIRECTORY}" \
@@ -76,10 +112,28 @@ esac
 key_table="${CFG_DIR}/KeyTable"
 signing_table="${CFG_DIR}/SigningTable"
 
-__line "line-key-${__object_id:?}" \
-	--file "${key_table}" \
-	--line "${SELECTOR:?}._domainkey.${DOMAIN:?} ${DOMAIN:?}:${SELECTOR:?}:${DIRECTORY:?}${SELECTOR:?}.private"
+KEY_STATE="$(cut -f 1 "${__object:?}/explorer/key-state")"
+KEY_LOCATION="$(cut -f 2- "${__object:?}/explorer/key-state")"
 
-__line "line-sig-${__object_id:?}" \
+__line "__opendkim_genkey/${__object_id:?}" \
+	--file "${key_table}" \
+	--line "${__object_id:?} ${SIGDOMAIN:?}:${SELECTOR:?}:${KEY_LOCATION:?}" \
+	--regex "^${__object_id:?}[[:space:]]" \
+	--state 'replace'
+
+sigtable_block() {
+	for sigkey in ${SIGKEY:?}; do
+		echo "${sigkey:?} ${__object_id:?}"
+	done
+}
+__block "__opendkim_genkey/${__object_id:?}" \
 	--file "${signing_table}" \
-	--line "${SIGKEY:?} ${SELECTOR:?}._domainkey.${DOMAIN:?}"
+	--text "$(sigtable_block)"
+
+if [ "${KEY_STATE:?}" = "present" ]; then
+	# Ensure proper permissions for the key file
+	__file "${KEY_LOCATION}" \
+		--owner "${user}" \
+		--group "${group}" \
+		--mode 0600
+fi

type/__opendkim_genkey/parameter/optional

@@ -1,4 +1,6 @@
 bits
 directory
+domain
 unrestricted
-sigkey
+selector
+sigdomain

type/__opendkim_genkey/parameter/optional_multiple

@@ -0,0 +1 @@
+sigkey

type/__opendkim_genkey/parameter/required

@@ -1,2 +0,0 @@
-domain
-selector

type/__php_fpm/files/php.ini.sh

@@ -20,7 +20,7 @@ variables_order = "GPCS"
 zend.assertions = -1
 
 ; Local custom variations
-include_path = ".:/usr/share/php${PHPVER:?}"
+include_path = ".:${PHP_INCLUDEDIR}"
 memory_limit = ${MEMORY_LIMIT:?}
 post_max_size = ${UPLOAD_MAX_FILESIZE:?}
 upload_max_filesize = ${UPLOAD_MAX_FILESIZE:?}

type/__php_fpm/man.rst

@@ -12,8 +12,7 @@ This type installs and configures PHP-FPM for a given version of PHP. It is
 expected to be used in combination with cdist-type__php_fpm_pool, which
 configures specific pools.
 
-Note that currently, this type is only implemented for Alpine Linux.
-
+This type supports Debian, Ubuntu and Alpine Linux.
 
 REQUIRED PARAMETERS
 -------------------

type/__php_fpm/manifest

@@ -7,12 +7,33 @@ export PHPVER
 
 case "$os" in
 	'alpine')
+		# Alpine packages looks like php81-fpm - we make sure to remove dots from user
+		# input.
+		PHPVER=$(echo "$PHPVER" | tr -d '.')
+
 		package="php${PHPVER}-fpm"
-	service="php-fpm${PHPVER}"
 		opcache_package="php${PHPVER}-opcache"
 		apcu_package="php${PHPVER}-pecl-apcu"
-	;;
 
+		service="php-fpm${PHPVER}"
+		php_confdir="/etc/php${PHPVER}"
+		php_ini="${php_confdir:?}/php.ini"
+
+		PHP_INCLUDEDIR="/usr/share/php${PHPVER:?}"
+		export PHP_INCLUDEDIR
+	;;
+	'debian'|'ubuntu')
+		package="php${PHPVER}-fpm"
+		opcache_package="php${PHPVER}-opcache"
+		apcu_package="php${PHPVER}-apcu"
+
+		service="php${PHPVER}-fpm"
+		php_confdir="/etc/php/${PHPVER}"
+		php_ini="${php_confdir:?}/fpm/php.ini"
+
+		PHP_INCLUDEDIR="/usr/share/php/${PHPVER:?}"
+		export PHP_INCLUDEDIR
+	;;
 	*)
 		printf "Your operating system is currently not supported by this type\n" >&2
 		printf "Please contribute an implementation for it if you can.\n" >&2
@@ -40,8 +61,8 @@ export UPLOAD_MAX_FILESIZE
 mkdir -p "${__object:?}/files"
 "${__type:?}/files/php.ini.sh" >"${__object:?}/files/php.ini"
 
-require="__package/$package" __file "/etc/php${PHPVER}/php.ini" \
+require="__package/$package" __file "${php_ini:?}" \
 	--mode 644 --source "${__object:?}/files/php.ini" \
 	--onchange "service $service restart"
 
-require="__file/etc/php${PHPVER}/php.ini" __service "$service" --action start
+require="__file/${php_ini:?}" __service "$service" --action start

type/__php_fpm_pool/man.rst

@@ -13,7 +13,7 @@ This type configures a pool named after the `__object_id` for a specified PHP
 version. Note that this types expects a same-version cdist-type__php_fpm type
 to have been run first: the user is responsible for doing so.
 
-Note that currently, this type is only implemented for Alpine Linux.
+This type supports Debian, Ubuntu and Alpine Linux.
 
 
 REQUIRED PARAMETERS

type/__php_fpm_pool/manifest

@@ -1,8 +1,5 @@
 #!/bin/sh
 
-# XXX: this type does not configure or install php-fpm: it expects the
-# __recycledcloud_php_fpm type to be used first before pools are configured.
-
 os=$(cat "${__global:?}/explorer/os")
 name=${__object_id:?}
 
@@ -11,10 +8,16 @@ export PHPVER
 
 case "$os" in
 	'alpine')
+		PHPVER=$(echo "$PHP_VERSION" | tr -d '.')
 		service="php-fpm${PHPVER}"
-	:
+		php_confdir="/etc/php${PHPVER}"
+		php_pooldir="${php_confdir:?}/php-fpm.d"
+	;;
+	'debian'|'ubuntu')
+		service="php${PHPVER}-fpm"
+		php_confdir="/etc/php/${PHPVER}"
+		php_pooldir="${php_confdir:?}/fpm/pool.d"
 	;;
-
 	*)
 		printf "Your operating system is currently not supported by this type\n" >&2
 		printf "Please contribute an implementation for it if you can.\n" >&2
@@ -32,6 +35,6 @@ export POOL_USER POOL_GROUP POOL_LISTEN_ADDR POOL_LISTEN_OWNER POOL_NAME
 mkdir -p "${__object:?}/files"
 "${__type:?}/files/www.conf.sh" >"${__object:?}/files/www.conf"
 
-__file "/etc/php${PHPVER:?}/php-fpm.d/${name}.conf" \
+__file "${php_pooldir:?}/${name}.conf" \
 	--mode 644 --source "${__object:?}/files/www.conf" \
 	--onchange "service $service reload"

type/__runit/manifest

@@ -6,7 +6,14 @@ os="$(cat "${__global}/explorer/os")"
 case "${os}" in
 	debian|devuan)
 		# zero-config sysvinit and systemd compatibility
-		__package runit-run
+		os_version="$(cat "${__global}/explorer/os_version")"
+		debian_package="runit-run"
+		case "${os_version}" in
+			beowulf)
+				debian_package="runit"
+			;;
+		esac
+		__package "${debian_package}"
 	;;
 	freebsd)
 		__key_value \

type/__runit_service/manifest

@@ -33,18 +33,25 @@ if [ "${state}" != "present" ]; then
 	exit
 fi
 
+# Setup run file
+__file --state "${state}" --mode 0550 --source "${source}" \
+	--onchange "sv restart '${sv}' || true" \
+	"${run_file}"
+export require="${require} __file${run_file}"
+
 if [ -f "${__object}/parameter/log" ]; then
 	# Setup logger if requested
-	__directory --parents "${svdir}/${sv}/log/main"
-	export require="${require} __directory${svdir}/${sv}/log/main"
+	logdir="/var/log/runit"
+	__directory --parents "${svdir}/${sv}/log"
+	__directory --state absent "${svdir}/${sv}/log/main"  # Remove lingering old fashioned log
+	__directory --parents "${logdir}/${sv}"
+	export require="${require} __directory${svdir}/${sv}/log __directory${logdir}/${sv}"
 	__file "${svdir}/${sv}/log/run" \
 		--state "${state}" \
 		--mode 0755 \
+		--onchange "sv restart '${sv}/log' || true" \
 		--source "-" <<EOF
 #!/bin/sh
-exec svlogd -tt ./main
+exec svlogd -tt '${logdir}/${sv}'
 EOF
 fi
-
-# Setup run file
-__file --state "${state}" --mode 0755 --source "${source}" "${run_file}"

type/__single_binary_service/explorer/explorer-version

@@ -0,0 +1,10 @@
+#!/bin/sh -e
+
+BIN_PREFIX="/usr/local/bin"
+SERVICE_NAME="${__object_id}"
+
+VERSION_FILE="${BIN_PREFIX}/.${SERVICE_NAME}.cdist.version"
+
+if [ -f "${VERSION_FILE}" ]; then
+	cat "${VERSION_FILE}"
+fi

type/__single_binary_service/man.rst

@@ -0,0 +1,195 @@
+cdist-type__single_binary_service(7)
+====================================
+
+NAME
+----
+cdist-type__single_binary_service - Setup a single-binary service
+
+
+DESCRIPTION
+-----------
+This type is designed to easily deploy and configure a single-binary service
+named `${__object_id}`.
+
+A good example of this are Prometheus exporters.
+
+This type makes certain assumptions that might not be correct on your system.
+If you need more flexibility, please get in touch and provide a use-case
+(and hopefully a backwards-compatible patch).
+
+This type will place the downloaded binary and, if requested, other extra
+binaries in `/usr/local/bin`.
+
+If a `--config-file-source` is provided, it will be placed under:
+`/etc/${__object_id}.conf`.
+
+This type supports services managed by `__runit(7)` when `systemd` is not
+the init system being used.
+
+
+REQUIRED PARAMETERS
+-------------------
+checksum
+    This will be passed verbatim to `__download(7)`.
+    Use something like `sha256:...`.
+
+url
+    This will be passed verbatim to `__download(7)`.
+
+version
+    This type will use a thumbstone file with a "version" number to track
+    whether or not a service must be updated.
+    This thumbstone file is placed under
+    `/usr/local/bin/.${__object_id}.cdist.version`.
+
+
+BOOLEAN PARAMETERS
+------------------
+unpack
+    If present, the contents of `--url` will be treated as an archive to be
+    unpacked with `__unpack(7)`.
+    See also `--unpack-args` and `--extra-binary`.
+
+do-not-manage-user
+    Always considered present when `--user` is `root`.
+    If present, the user in `--user` will not be managed by this type with
+    `__user`, this means it *must* exist beforehand when installing the service
+    and it will not be removed by this type.
+
+
+OPTIONAL PARAMETERS
+-------------------
+config-file-source
+    If present, this file's contents will be placed under
+    `/etc/${__object_id}.conf` with permissions `0440` and ownership assigned to
+    `--user` and `--group`.
+    If `-` is passed, this type's `stdin` will be used.
+
+user
+    The user under which the service will run. Defaults to `root`.
+    If this user is not `root` and `--do-not-manage-user` is not present,
+    this user will be created or removed as per the `--state` parameter.
+
+user-home-dir
+    Does not have an effect if `--do-not-manage-user` is used or `--user` is
+    `root`.
+    The home directory of the service user. It will be created.
+    Defaults to `/nonexistent`, in this case the home directory will not be
+    created.
+
+group
+    The group under which the service will run. Defaults to `--user`.
+
+state
+    Whether the service is to be `present` (default) or `absent`.
+    When `absent`, this type will clean any binaries listed in `--extra-binary`
+    and also the config file as described in `--config-file-source`.
+
+binary
+    This will be the binary name. Defaults to `${__object_id}`.
+    If `--unpack` is used, a binary with this name must be unpacked.
+    Otherwise, the contents of `--url` will be placed under this binary name.
+
+env
+    An `env` file consiting of `ENVIRONMENT_VARIABLE=VALUE`, one variable per
+    line.
+    Empty lines and those starting with `#` are ignored.
+
+service-args
+    Any extra arguments to pass along with `--service-exec`. Beware that any
+    service-args having the format `--config=/etc/foo.cfg` should be
+    represented in the following way `--service-exec='--config=/etc/foo.cfg'`
+
+service-exec
+    The executable to use for this service.
+    Defaults to `/usr/local/bin/BINARY_NAME` where `BINARY_NAME` is the
+    resulting value of `--binary`.
+
+service-definition
+    The service definition to be used as an override.
+    Note that this type decides dinammically between runit and systemd, and
+    you can currently only define either a systemd unit or a runit script here.
+    Use this parameter only for testing and get in touch to discuss how your
+    particular use-case can be supported by the type.
+
+service-description
+    The service description to be used in, e.g. the systemd unit file.
+    Defaults to `cdist-managed '${__object_id}' service`.
+
+unpack-args
+    Only has an effect if `--unpack` is used.
+    These arguments will be passed verbatim to `__unpack(7)`.
+    Very useful as this type assumes the archive does not have the binaries in
+    subdirectories; that can be worked around with
+    `--unpack-args '--tar-strip 1'`.
+
+unpack-extension
+    Only has an effect if `--unpack` is used.
+    The file extension of the file to unpack, defaults to `.tar.gz`.
+
+working-directory
+    If set, the working directory with which the service will be started.
+
+
+OPTIONAL MULTIPLE PARAMETERS
+----------------------------
+extra-binary
+    Only useful with `--unpack`.
+    If passed, these binaries will also be installed when `--state` is `present`
+    and removed when `--state` is `absent`.
+    Handle with care :-).
+
+
+EXAMPLES
+--------
+
+.. code-block:: sh
+
+	# Install and enable the ipmi_exporter service
+	#   The variables are defined in the manifest previously
+	__single_binary_service ipmi_exporter \
+		--user "${USER}" \
+		--service-args ' --config.file=/etc/ipmi_exporter.conf' \
+		--version "${SHOULD_VERSION}" \
+		--checksum "${CHECKSUM}" \
+		--url "${DOWNLOAD_URL}" \
+		--state "present" \
+		--unpack \
+		--unpack-args "--tar-strip 1" \
+		--config-file-source '-' <<-EOF
+	# Remotely managed, changes will be lost
+	# [...] config contents goes here
+	EOF
+
+	# Remove the ipmi_exporter service along with the user and its config
+	__single_binary_service ipmi_exporter \
+		--user "${USER}" \
+		--version "${SHOULD_VERSION}" \
+		--checksum "${CHECKSUM}" \
+		--url "${DOWNLOAD_URL}" \
+		--state "absent"
+
+	# Same, but the service was using my user! Let's not delete that!
+	__single_binary_service ipmi_exporter \
+		--user "evilham" \
+		--do-not-manage-user \
+		--version "${SHOULD_VERSION}" \
+		--checksum "${CHECKSUM}" \
+		--url "${DOWNLOAD_URL}" \
+		--state "absent"
+
+
+SEE ALSO
+--------
+- `__download(7)`
+- `__unpack(7)`
+
+
+AUTHORS
+-------
+Evilham <contact@evilham.com>
+
+
+COPYING
+-------
+Copyright \(C) 2022 Evilham.

type/__single_binary_service/manifest

@@ -0,0 +1,305 @@
+#!/bin/sh -e
+SERVICE_NAME="${__object_id}"
+
+OS="$(cat "${__global}/explorer/os")"
+
+case "${OS}" in
+	debian|devuan)
+		SUPER_USER_GROUP=root
+		ETC_DIR="/etc"
+	;;
+	*bsd)
+		SUPER_USER_GROUP=wheel
+		ETC_DIR="/usr/local/etc"
+	;;
+	*)
+		echo "Your OS '${OS}' is currently not supported." >&2
+		exit 1
+	;;
+esac
+INIT="$(cat "${__global}/explorer/init")"
+
+case "${INIT}" in
+	systemd)
+		service_definition_require="__systemd_unit/${SERVICE_NAME}.service"
+		service_command="service ${SERVICE_NAME} %s"
+	;;
+	runit|sysvinit)
+		# We will use runit to manage these services
+		__runit
+		export require="__runit"
+		service_definition_require="__runit_service/${SERVICE_NAME}"
+		service_command="sv %s ${SERVICE_NAME}"
+	;;
+	*)
+		echo "Init system ${INIT}' is currently not supported." >&2
+		exit 1
+	;;
+esac
+
+BIN_DIR="/usr/local/bin"
+
+# Ensure the target bin dir exists
+#   Care, we never want to remove it :-D
+__directory "${BIN_DIR}" \
+	--state "exists" \
+	--mode 0755
+export require="${require} __directory${BIN_DIR}"
+
+STATE="$(cat "${__object}/parameter/state")"
+USER="$(cat "${__object}/parameter/user")"
+GROUP="$(cat "${__object}/parameter/group" 2>/dev/null || true)"
+if [ -z "${GROUP}" ]; then
+	if [ "${USER}" != "root" ]; then
+		GROUP="${USER}"
+	else
+		GROUP="${SUPER_USER_GROUP}"
+	fi
+fi
+
+
+BINARY="$(cat "${__object}/parameter/binary" 2>/dev/null || true)"
+if [ -z "${BINARY}" ]; then
+	BINARY="${SERVICE_NAME}"
+fi
+EXTRA_BINARIES="$(cat "${__object}/parameter/extra-binary" 2>/dev/null || true)"
+# This only makes sense for file archives
+if [ -n "${EXTRA_BINARIES}" ] && [ -f "${__object}/parameter/unpack" ]; then
+	cat >&2 <<-EOF
+	You cannot specify extra binaries without the --unpack argument.
+	Make sure that the --url argument points to a file archive.
+EOF
+fi
+
+SERVICE_EXEC="$(cat "${__object}/parameter/service-exec" 2>/dev/null || true)"
+if [ -z "${SERVICE_EXEC}" ]; then
+	SERVICE_EXEC="${BIN_DIR}/${BINARY}"
+fi
+SERVICE_ARGS="$(cat "${__object}/parameter/service-args")"
+SERVICE_EXEC="${SERVICE_EXEC} ${SERVICE_ARGS}"
+
+SERVICE_DESCRIPTION="$(cat "${__object}/parameter/service-description" \
+	2>/dev/null || true)"
+if [ -z "${SERVICE_DESCRIPTION}" ]; then
+	SERVICE_DESCRIPTION="cdist-managed '${SERVICE_NAME}' service"
+fi
+
+SERVICE_DEFINITION="$(cat "${__object}/parameter/service-definition" 2>/dev/null || true)"
+
+WORKING_DIRECTORY_PATH="$(cat "${__object}/parameter/working-directory" 2>/dev/null || true)"
+if [ -n "${WORKING_DIRECTORY_PATH}" ]; then
+	WORKING_DIRECTORY_SYSTEMD="WorkingDirectory=${WORKING_DIRECTORY_PATH}"
+	WORKING_DIRECTORY_RUNIT="cd '${WORKING_DIRECTORY_PATH}'"
+fi
+
+DOWNLOAD_URL="$(cat "${__object}/parameter/url")"
+CHECKSUM="$(cat "${__object}/parameter/checksum")"
+SHOULD_VERSION="$(cat "${__object}/parameter/version")"
+
+# Create a user for the service if it is not root
+USER_HOME_DIR="/root"
+if [ "${USER}" != "root" ] && \
+		[ ! -f "${__object}/parameter/do-not-manage-user" ]; then
+	if [ "${STATE}" = "absent" ]; then
+		# When removing, ensure user is not being used
+		user_require="${service_definition_require}"
+	fi
+	USER_HOME_DIR="$(cat "${__object}/parameter/user-home-dir")"
+	if [ "${USER_HOME_DIR}" != "/nonexistent" ]; then
+		USER_CREATE_HOME="--create-home"
+	fi
+	require="${require} ${user_require}" __user "${USER}" \
+		--system \
+		--state "${STATE}" \
+		--home "${USER_HOME_DIR}" \
+		--comment "cdist-managed service user" \
+		${USER_CREATE_HOME}
+	# Track dependencies
+	service_require="${service_require} __user/${USER}"
+fi
+
+# Place config file if necessary
+CONFIG_FILE_DEST="${ETC_DIR}/${SERVICE_NAME}.conf"
+CONFIG_FILE_SOURCE="$(cat "${__object}/parameter/config-file-source" 2>/dev/null || true)"
+if [ "${CONFIG_FILE_SOURCE}" = "-" ]; then
+	CONFIG_FILE_SOURCE="${__object}/stdin"
+fi
+if [ -n "${CONFIG_FILE_SOURCE}" ] && [ "${STATE}" = "present" ]; then
+	require="${require} __user/${USER}" __file \
+		"${CONFIG_FILE_DEST}" \
+		--owner "${USER}" \
+		--group "${GROUP}" \
+		--mode "0440" \
+		--source "${CONFIG_FILE_SOURCE}"
+	service_require="${service_require} __file${CONFIG_FILE_DEST}"
+fi
+
+
+
+# These messages will trigger a service restart (overridden for systemd)
+service_config_reload_pattern="^__file${CONFIG_FILE_DEST}"
+
+# This should setup the object in $service_definition_require
+# See above.
+case "${INIT}" in
+	systemd)
+		if [ -z "${SERVICE_DEFINITION}" ]; then
+			SYSTEMD_ENV_FILE="/etc/systemd/system/${SERVICE_NAME}.env"
+			__file "${SYSTEMD_ENV_FILE}" \
+				--mode 0400 \
+				--source "${__object}/parameter/env"
+			# We need to take into account the envionment file for systemd too
+			service_config_reload_pattern="(${service_config_reload_pattern}|^__file${SYSTEMD_ENV_FILE})"
+
+			SERVICE_DEFINITION="$(cat <<EOF
+[Unit]
+Description=${SERVICE_DESCRIPTION}
+After=network.target
+
+[Service]
+Type=simple
+
+User=${USER}
+Group=${GROUP}
+ExecStart=${SERVICE_EXEC}
+Restart=always
+EnvironmentFile=${SYSTEMD_ENV_FILE}
+${WORKING_DIRECTORY_SYSTEMD}
+
+[Install]
+WantedBy=multi-user.target
+EOF
+)"
+		fi
+		__systemd_unit "${SERVICE_NAME}.service" \
+			--source "-" \
+			--state "${STATE}" \
+			--enablement-state "enabled" <<EOF
+${SERVICE_DEFINITION}
+EOF
+	;;
+	runit|sysvinit)
+		if [ -z "${SERVICE_DEFINITION}" ]; then
+			RUNIT_ENV="$(sed -Ee 's!^([[:alnum:]_]+)=(.*)$!export \1=\2!' "${__object}/parameter/env")"
+			SERVICE_DEFINITION="$(cat <<EOF
+#!/bin/sh -e
+${WORKING_DIRECTORY_RUNIT}
+# User-provided environment
+${RUNIT_ENV}
+# System vars
+export HOME="\$(getent passwd '${USER}' | cut -d: -f6)"
+export USER="${USER}"
+export GROUP="${GROUP}"
+
+exec 2>&1
+exec chpst -u "${USER}:${GROUP}" ${SERVICE_EXEC}
+EOF
+)"
+		fi
+		__runit_service "${SERVICE_NAME}" \
+			--state "${STATE}" \
+			--log \
+			--source - <<EOF
+${SERVICE_DEFINITION}
+EOF
+	;;
+esac
+service_require="${service_require} ${service_definition_require}"
+
+# Proceed after user and service description have been prepared
+export require="${require} ${service_require}"
+
+VERSION_FILE="${BIN_DIR}/.${SERVICE_NAME}.cdist.version"
+IS_VERSION="$(cat "${__object}/explorer/explorer-version")"
+
+
+if [ "${STATE}" = "absent" ]; then
+	# Perform cleanup of generated files
+	for bin_file in ${BINARY} ${EXTRA_BINARIES}; do
+		__file "${BIN_DIR}/${bin_file}" --state "absent"
+	done
+	__file "${VERSION_FILE}" --state "absent"
+	__file "${CONFIG_FILE_DEST}" --state "absent"
+fi
+
+if [ "${STATE}" != "present" ]; then
+	exit
+fi
+
+sv_cmd() {
+	# This is intentional
+	# shellcheck disable=SC2059
+	printf "${service_command}" "$1"
+}
+
+if [ "${SHOULD_VERSION}" != "${IS_VERSION}" ]; then
+	# We are installing the service and there has been a version change
+	# (or it is first-time install)
+	TMP_PATH="/tmp/${SERVICE_NAME}-${SHOULD_VERSION}"
+
+	# This is what will stop the service, replace the binaries and
+	# start the service again
+	perform_service_upgrade="$(cat <<EOF
+$(sv_cmd stop) || true
+if [ -f '${TMP_PATH}' ]; then
+	chown root:${SUPER_USER_GROUP} '${TMP_PATH}'
+	chmod 0555 '${TMP_PATH}'
+	cp -af '${TMP_PATH}' '${BIN_DIR}/${BINARY}'
+else
+	for bin_file in ${BINARY} ${EXTRA_BINARIES}; do
+		bin_path="${TMP_PATH}/\${bin_file}"
+		chown root:${SUPER_USER_GROUP} "\${bin_path}"
+		chmod 0555 "\${bin_path}"
+		cp -af "\${bin_path}" "${BIN_DIR}/\${bin_file}"
+	done
+fi
+$(sv_cmd start) || true
+EOF
+)"
+
+	if [ -f "${__object}/parameter/unpack" ]; then
+		UNPACK_EXTENSION="$(cat "${__object}/parameter/unpack-extension")"
+		UNPACK_ARGS="$(cat "${__object}/parameter/unpack-args" \
+			2>/dev/null || true)"
+		# Download packed file
+		__download "${TMP_PATH}${UNPACK_EXTENSION}" \
+			--url "${DOWNLOAD_URL}" \
+			--download remote \
+			--sum "${CHECKSUM}"
+
+		# Unpack file and also perform service upgrade
+		# shellcheck disable=SC2086
+		require="__download${TMP_PATH}${UNPACK_EXTENSION}" \
+			__unpack "${TMP_PATH}${UNPACK_EXTENSION}" \
+			${UNPACK_ARGS} \
+			--destination "${TMP_PATH}"
+		version_bump_require="__unpack${TMP_PATH}${UNPACK_EXTENSION}"
+	else
+		# Create temp directory
+		__directory "${TMP_PATH}"
+		# Download binary directoy to the temp directory with the
+		# specified binary name
+		require="__directory${TMP_PATH}" __download \
+			"${TMP_PATH}/${BINARY}" \
+			--url "${DOWNLOAD_URL}" \
+			--download remote \
+			--sum "${CHECKSUM}"
+		version_bump_require="__download${TMP_PATH}/${BINARY}"
+	fi
+
+	# Perform update of cdist-managed version file
+	# And also perform service upgrade
+	# This is a bug if service_upgrade fails >,<
+	printf "%s" "${SHOULD_VERSION}" | \
+		require="${version_bump_require}" __file \
+			"${VERSION_FILE}" \
+			--onchange "${perform_service_upgrade}" \
+			--source "-"
+else
+	# We only restart here if there was a config or env change
+	# but there was not a version change
+	require="${service_require}" __check_messages \
+		"single_binary_service_${__object_id}" \
+		--pattern "${service_config_reload_pattern}" \
+		--execute "$(sv_cmd restart)"
+fi

type/__single_binary_service/parameter/boolean

@@ -0,0 +1,2 @@
+do-not-manage-user
+unpack

type/__single_binary_service/parameter/default/state

@@ -0,0 +1 @@
+present

type/__single_binary_service/parameter/default/unpack-extension

@@ -0,0 +1 @@
+.tar.gz

type/__single_binary_service/parameter/default/user

@@ -0,0 +1 @@
+root

type/__single_binary_service/parameter/default/user-home-dir

@@ -0,0 +1 @@
+/nonexistent

type/__single_binary_service/parameter/optional

@@ -0,0 +1,14 @@
+config-file-source
+env
+user
+group
+state
+binary
+service-args
+service-exec
+service-description
+service-definition
+unpack-extension
+unpack-args
+user-home-dir
+working-directory

type/__single_binary_service/parameter/optional_multiple

@@ -0,0 +1 @@
+extra-binary

type/__single_binary_service/parameter/required

@@ -0,0 +1,3 @@
+url
+checksum
+version

type/__uacme_obtain/man.rst

@@ -38,7 +38,8 @@ install-key-to
   Installation path of the certificate's private key.
 
 renew-hook
-  Renew hook executed on certificate renewal (e.g. `service nginx reload`).
+  Renew hook executed on certificate renewal (e.g. `service nginx reload`, `-`
+  for the standard input).
 
 force-cert-ownership-to
   Override default ownership for TLS certificate, passed as argument to chown.

type/__uacme_obtain/manifest

@@ -109,8 +109,12 @@ export CERT_TARGET
 RENEW_HOOK=
 if [ -f "${__object:?}/parameter/renew-hook" ];
 then
+	if [ "$(cat "${__object:?}/parameter/renew-hook")" = "-" ]; then
+		RENEW_HOOK="$(cat ${__object:?}/stdin)"
+	else
 		RENEW_HOOK="$(cat "${__object:?}/parameter/renew-hook")"
 	fi
+fi
 export RENEW_HOOK
 
 if [ -n "$KEY_TARGET" ] && [ -z "$CERT_TARGET" ]; then