Apply machine_type explorer fix from pedro

e139397529

.gitattributes

@@ -4,5 +4,5 @@
 docs/speeches export-ignore
 docs/video export-ignore
 docs/src/man7 export-ignore
-bin/build-helper export-ignore
+bin/cdist-build-helper export-ignore
 README-maintainers export-ignore

.gitlab-ci.yml

@@ -1,18 +1,23 @@
+---
+image: code.ungleich.ch:5050/ungleich-public/cdist/cdist-ci:latest
+
 stages:
     - test
 
-unit_tests:
-    stage: test
-    script:
-        - ./bin/build-helper version
-        - ./bin/build-helper test
-
-pycodestyle:
-    stage: test
-    script:
-        - ./bin/build-helper pycodestyle
+before_script:
+    - ./bin/cdist-build-helper version
 
 shellcheck:
     stage: test
     script:
-        - ./bin/build-helper shellcheck
+        - ./bin/cdist-build-helper shellcheck
+
+pycodestyle:
+    stage: test
+    script:
+        - ./bin/cdist-build-helper pycodestyle
+
+unit_tests:
+    stage: test
+    script:
+        - ./bin/cdist-build-helper test

Makefile

@@ -35,9 +35,9 @@ DOCS_SRC_DIR=./docs/src
 SPEECHDIR=./docs/speeches
 TYPEDIR=./cdist/conf/type
 
-SPHINXM=make -C $(DOCS_SRC_DIR) man
-SPHINXH=make -C $(DOCS_SRC_DIR) html
-SPHINXC=make -C $(DOCS_SRC_DIR) clean
+SPHINXM=$(MAKE) -C $(DOCS_SRC_DIR) man
+SPHINXH=$(MAKE) -C $(DOCS_SRC_DIR) html
+SPHINXC=$(MAKE) -C $(DOCS_SRC_DIR) clean
 
 ################################################################################
 # Manpages
@@ -81,7 +81,7 @@ version:
 	}
 
 # Manpages #3: generic part
-man: version $(MANTYPES) $(DOCSREF)
+man: version configskel $(MANTYPES) $(DOCSREF) $(DOCSTYPESREF)
 	$(SPHINXM)
 
 html: version configskel $(MANTYPES) $(DOCSREF) $(DOCSTYPESREF)
@@ -104,7 +104,7 @@ DOTMANTYPES=$(subst /man.rst,.rst,$(DOTMANTYPEPREFIX))
 $(DOTMAN7DSTDIR)/cdist-type%.rst: $(DOTTYPEDIR)/%/man.rst
 	ln -sf "$^" $@
 
-dotman: version $(DOTMANTYPES)
+dotman: version configskel $(DOTMANTYPES) $(DOCSREF) $(DOCSTYPESREF)
 	$(SPHINXM)
 
 ################################################################################

README

@@ -1,7 +0,0 @@
-cdist
------
-
-cdist is a usable configuration management system.
-
-For the web documentation have a look at https://www.cdi.st/
-or at docs/src for reStructuredText manual.

README-maintainers

@@ -1,4 +1,4 @@
-Maintainers should use ./bin/build-helper script.
+Maintainers should use ./bin/cdist-build-helper script.
 
 Makefile is intended for end users. It can be used for non-maintaining
 targets that can be run from pure source (without git repository).

README.md

@@ -0,0 +1,31 @@
+# cdist
+
+**cdist** is a usable configuration management system.
+
+It adheres to the [**KISS principle**](https://en.wikipedia.org/wiki/KISS_principle)
+and is being used in small up to enterprise grade environments.
+
+For more information have a look at [**homepage**](https://cdi.st)
+or at **``docs/src``** for manual in **reStructuredText** format.
+
+## Contributing
+
+Merge/Pull requests can be made in both
+[upstream **GitLab**](https://code.ungleich.ch/ungleich-public/cdist/merge_requests)
+(managed by [**ungleich**](https://ungleich.ch))
+and [**GitHub** project](https://github.com/ungleich/cdist/pulls).
+
+Issues can be made and other project management activites happen
+[**only in GitLab**](https://code.ungleich.ch/ungleich-public/cdist)
+(needs [**ungleich** account](https://account.ungleich.ch)).
+
+For community-maintained types there is
+[**cdist-contrib** project](https://code.ungleich.ch/ungleich-public/cdist-contrib).
+
+## Participating
+
+IRC: ``#cdist`` @ [libera](https://libera.chat)
+
+Matrix: ``#cdist:ungleich.ch``
+
+Matrix and IRC are bridged.

bin/cdist

@@ -1,7 +1,8 @@
-#!/bin/sh
+#!/usr/bin/env python3
 # -*- coding: utf-8 -*-
 #
-# 2012 Nico Schottelius (nico-cdist at schottelius.org)
+# 2010-2016 Nico Schottelius (nico-cdist at schottelius.org)
+# 2016 Darko Poljak (darko.poljak at gmail.com)
 #
 # This file is part of cdist.
 #
@@ -20,14 +21,83 @@
 #
 #
 
-# Wrapper for real script to allow execution from checkout
-dir=${0%/*}
+import logging
+import os
+import sys
 
-# Ensure version is present - the bundled/shipped version contains a static version,
-# the git version contains a dynamic version
-"$dir/build-helper" version
+# See if this file's parent is cdist module
+# and if so add it to module search path.
+cdist_dir = os.path.realpath(
+    os.path.join(
+        os.path.dirname(os.path.realpath(__file__)),
+        os.pardir))
+cdist_init_dir = os.path.join(cdist_dir, 'cdist', '__init__.py')
+if os.path.exists(cdist_init_dir):
+    sys.path.insert(0, cdist_dir)
 
-libdir=$(cd "${dir}/../" && pwd -P)
-export PYTHONPATH="${libdir}"
+import cdist            # noqa 402
+import cdist.argparse   # noqa 402
+import cdist.banner     # noqa 402
+import cdist.config     # noqa 402
+import cdist.install    # noqa 402
+import cdist.shell      # noqa 402
+import cdist.inventory  # noqa 402
 
-"$dir/../scripts/cdist" "$@"
+
+def commandline():
+    """Parse command line"""
+
+    # preos subcommand hack
+    if len(sys.argv) > 1 and sys.argv[1] == 'preos':
+        return cdist.preos.PreOS.commandline(sys.argv[1:])
+    parser, cfg = cdist.argparse.parse_and_configure(sys.argv[1:])
+    args = cfg.get_args()
+
+    # Work around python 3.3 bug:
+    # http://bugs.python.org/issue16308
+    # http://bugs.python.org/issue9253
+
+    # FIXME: catching AttributeError also hides
+    # real problems.. try a different way
+
+    # FIXME: we always print main help, not
+    # the help of the actual parser being used!
+    try:
+        getattr(args, "func")
+    except AttributeError:
+        parser['main'].print_help()
+        sys.exit(0)
+
+    args.func(args)
+
+
+if __name__ == "__main__":
+    if sys.version_info[:3] < cdist.MIN_SUPPORTED_PYTHON_VERSION:
+        print(
+            'Python >= {} is required on the source host.'.format(
+                ".".join(map(str, cdist.MIN_SUPPORTED_PYTHON_VERSION))),
+            file=sys.stderr)
+        sys.exit(1)
+
+    exit_code = 0
+
+    try:
+        import re
+        import os
+
+        if re.match("__", os.path.basename(sys.argv[0])):
+            import cdist.emulator
+            emulator = cdist.emulator.Emulator(sys.argv)
+            emulator.run()
+        else:
+            commandline()
+
+    except KeyboardInterrupt:
+        exit_code = 2
+
+    except cdist.Error as e:
+        log = logging.getLogger("cdist")
+        log.error(e)
+        exit_code = 1
+
+    sys.exit(exit_code)

bin/cdist-build-helper

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# 2011-2013 Nico Schottelius (nico-cdist at schottelius.org)
+# 2011-2022 Nico Schottelius (nico-cdist at schottelius.org)
 # 2016-2019 Darko Poljak (darko.poljak at gmail.com)
 #
 # This file is part of cdist.
@@ -45,7 +45,7 @@ usage() {
         shellcheck-manifests
         shellcheck-local-gencodes
         shellcheck-remote-gencodes
-        shellcheck-scripts
+        shellcheck-bin
         shellcheck-gencodes
         shellcheck-types
         shellcheck
@@ -100,7 +100,7 @@ case "$option" in
                     if (\$0 ~ /^$end/) {
                         exit
                     } else {
-                        print \$0 
+                        print \$0
                     }
                 }
             }" "$basedir/docs/changelog"
@@ -135,7 +135,7 @@ case "$option" in
 
         version=$1; shift
 
-        ( 
+        (
         cat << eof
 Subject: cdist $version has been released
 
@@ -336,7 +336,7 @@ eof
         make docs-clean
         make docs
 
-        ############################################################# 
+        #############################################################
         # Everything green, let's do the release
 
         # Tag the current commit
@@ -371,7 +371,6 @@ eof
 Manual steps post release:
     - cdist-web
     - send generated mailinglist.tmp mail
-    - twitter
 eof
     ;;
 
@@ -406,7 +405,7 @@ eof
     ;;
 
     pycodestyle|pep8)
-        pycodestyle "${basedir}" "${basedir}/scripts/cdist"
+        pycodestyle "${basedir}" "${basedir}/bin/cdist"
     ;;
 
     check-pycodestyle)
@@ -461,27 +460,34 @@ eof
         test ! -s "${SHELLCHECKTMP}" || { cat "${SHELLCHECKTMP}"; exit 1; }
     ;;
 
-    shellcheck-scripts)
+    # NOTE: shellcheck-scripts is kept for compatibility
+    shellcheck-bin|shellcheck-scripts)
         # shellcheck disable=SC2086
-        ${SHELLCHECKCMD} scripts/cdist-dump scripts/cdist-new-type > "${SHELLCHECKTMP}"
+        ${SHELLCHECKCMD} bin/cdist-dump bin/cdist-new-type > "${SHELLCHECKTMP}"
         test ! -s "${SHELLCHECKTMP}" || { cat "${SHELLCHECKTMP}"; exit 1; }
     ;;
 
     shellcheck-gencodes)
-        "$0" shellcheck-local-gencodes || exit 1
-        "$0" shellcheck-remote-gencodes || exit 1
+        errors=false
+        "$0" shellcheck-local-gencodes || errors=true
+        "$0" shellcheck-remote-gencodes || errors=true
+        ! $errors || exit 1
     ;;
 
     shellcheck-types)
-        "$0" shellcheck-type-explorers || exit 1
-        "$0" shellcheck-manifests || exit 1
-        "$0" shellcheck-gencodes || exit 1
+        errors=false
+        "$0" shellcheck-type-explorers || errors=true
+        "$0" shellcheck-manifests || errors=true
+        "$0" shellcheck-gencodes || errors=true
+        ! $errors || exit 1
     ;;
 
     shellcheck)
-        "$0" shellcheck-global-explorers || exit 1
-        "$0" shellcheck-types || exit 1
-        "$0" shellcheck-scripts || exit 1
+        errors=false
+        "$0" shellcheck-global-explorers || errors=true
+        "$0" shellcheck-types || errors=true
+        "$0" shellcheck-bin || errors=true
+        ! $errors || exit 1
     ;;
 
     shellcheck-type-files)
@@ -491,12 +497,14 @@ eof
     ;;
 
     shellcheck-with-files)
-        "$0" shellcheck || exit 1
-        "$0" shellcheck-type-files || exit 1
+        errors=false
+        "$0" shellcheck || errors=true
+        "$0" shellcheck-type-files || errors=true
+        ! $errors || exit 1
     ;;
 
     shellcheck-build-helper)
-        ${SHELLCHECKCMD} ./bin/build-helper
+        ${SHELLCHECKCMD} ./bin/cdist-build-helper
     ;;
 
     check-shellcheck)

bin/cdist-dump

@@ -224,6 +224,7 @@ hor_line()
 if [ "${do_global_explorer}" ]
 then
     print_verbose 2 "Dumping global explorers"
+    # shellcheck disable=SC2086
     set -- "$@" ${or} \( \
                 -path "*/explorer/*" -a \
                 ! -path "*/conf/*" -a \

cdist/__init__.py

@@ -22,11 +22,27 @@
 
 import os
 import hashlib
+import subprocess
 
 import cdist.log
-import cdist.version
 
-VERSION = cdist.version.VERSION
+
+VERSION = 'unknown version'
+
+try:
+    import cdist.version
+    VERSION = cdist.version.VERSION
+except ModuleNotFoundError:
+    cdist_dir = os.path.abspath(
+        os.path.join(os.path.dirname(__file__), os.pardir))
+    if os.path.isdir(os.path.join(cdist_dir, '.git')):
+        try:
+            VERSION = subprocess.check_output(
+                ['git', 'describe', '--always'],
+                cwd=cdist_dir,
+                universal_newlines=True)
+        except Exception:
+            pass
 
 BANNER = """
              ..          .       .x+=:.        s
@@ -48,6 +64,9 @@ REMOTE_EXEC = "ssh -o User=root"
 REMOTE_CMDS_CLEANUP_PATTERN = "ssh -o User=root -O exit -S {}"
 
 
+MIN_SUPPORTED_PYTHON_VERSION = (3, 5)
+
+
 class Error(Exception):
     """Base exception class for this project"""
     pass

cdist/argparse.py

@@ -5,12 +5,14 @@ import logging
 import collections
 import functools
 import cdist.configuration
+import cdist.log
 import cdist.preos
 import cdist.info
+import cdist.scan.commandline
 
 
 # set of beta sub-commands
-BETA_COMMANDS = set(('install', 'inventory', ))
+BETA_COMMANDS = set(('install', 'inventory', 'scan', ))
 # set of beta arguments for sub-commands
 BETA_ARGS = {
     'config': set(('tag', 'all_tagged_hosts', 'use_archiving', )),
@@ -125,6 +127,14 @@ def get_parsers():
                   'value.'),
             action='count', default=None)
 
+    parser['colored_output'] = argparse.ArgumentParser(add_help=False)
+    parser['colored_output'].add_argument(
+            '--colors', metavar='WHEN',
+            help="Colorize cdist's output based on log level; "
+                 "WHEN is 'always', 'never', or 'auto'.",
+            action='store', dest='colored_output', required=False,
+            choices=cdist.configuration.ColoredOutputOption.CHOICES)
+
     parser['beta'] = argparse.ArgumentParser(add_help=False)
     parser['beta'].add_argument(
            '-b', '--beta',
@@ -197,6 +207,13 @@ def get_parsers():
                  'supported. Without argument CPU count is used by default. '),
            action='store', dest='jobs',
            const=multiprocessing.cpu_count())
+    parser['config_main'].add_argument(
+           '--log-server',
+           action='store_true',
+           help=('Start a log server for sub processes to use. '
+                 'This is mainly useful when running cdist nested '
+                 'from a code-local script. Log server is alwasy '
+                 'implicitly started for \'install\' command.'))
     parser['config_main'].add_argument(
            '-n', '--dry-run',
            help='Do not execute code.', action='store_true')
@@ -257,8 +274,7 @@ def get_parsers():
             '-f', '--file',
             help=('Read specified file for a list of additional hosts to '
                   'operate on or if \'-\' is given, read stdin (one host per '
-                  'line). If no host or host file is specified then, by '
-                  'default, read hosts from stdin.'),
+                  'line).'),
             dest='hostfile', required=False)
     parser['config_args'].add_argument(
            '-p', '--parallel', nargs='?', metavar='HOST_MAX',
@@ -283,6 +299,7 @@ def get_parsers():
             'host', nargs='*', help='Host(s) to operate on.')
     parser['config'] = parser['sub'].add_parser(
             'config', parents=[parser['loglevel'], parser['beta'],
+                               parser['colored_output'],
                                parser['common'],
                                parser['config_main'],
                                parser['inventory_common'],
@@ -301,6 +318,7 @@ def get_parsers():
 
     parser['add-host'] = parser['invsub'].add_parser(
             'add-host', parents=[parser['loglevel'], parser['beta'],
+                                 parser['colored_output'],
                                  parser['common'],
                                  parser['inventory_common']])
     parser['add-host'].add_argument(
@@ -308,13 +326,12 @@ def get_parsers():
     parser['add-host'].add_argument(
            '-f', '--file',
            help=('Read additional hosts to add from specified file '
-                 'or from stdin if \'-\' (each host on separate line). '
-                 'If no host or host file is specified then, by default, '
-                 'read from stdin.'),
+                 'or from stdin if \'-\' (each host on separate line). '),
            dest='hostfile', required=False)
 
     parser['add-tag'] = parser['invsub'].add_parser(
             'add-tag', parents=[parser['loglevel'], parser['beta'],
+                                parser['colored_output'],
                                 parser['common'],
                                 parser['inventory_common']])
     parser['add-tag'].add_argument(
@@ -323,20 +340,12 @@ def get_parsers():
     parser['add-tag'].add_argument(
            '-f', '--file',
            help=('Read additional hosts to add tags from specified file '
-                 'or from stdin if \'-\' (each host on separate line). '
-                 'If no host or host file is specified then, by default, '
-                 'read from stdin. If no tags/tagfile nor hosts/hostfile'
-                 ' are specified then tags are read from stdin and are'
-                 ' added to all hosts.'),
+                 'or from stdin if \'-\' (each host on separate line). '),
            dest='hostfile', required=False)
     parser['add-tag'].add_argument(
            '-T', '--tag-file',
            help=('Read additional tags to add from specified file '
-                 'or from stdin if \'-\' (each tag on separate line). '
-                 'If no tag or tag file is specified then, by default, '
-                 'read from stdin. If no tags/tagfile nor hosts/hostfile'
-                 ' are specified then tags are read from stdin and are'
-                 ' added to all hosts.'),
+                 'or from stdin if \'-\' (each tag on separate line). '),
            dest='tagfile', required=False)
     parser['add-tag'].add_argument(
            '-t', '--taglist',
@@ -346,6 +355,7 @@ def get_parsers():
 
     parser['del-host'] = parser['invsub'].add_parser(
             'del-host', parents=[parser['loglevel'], parser['beta'],
+                                 parser['colored_output'],
                                  parser['common'],
                                  parser['inventory_common']])
     parser['del-host'].add_argument(
@@ -356,13 +366,12 @@ def get_parsers():
     parser['del-host'].add_argument(
             '-f', '--file',
             help=('Read additional hosts to delete from specified file '
-                  'or from stdin if \'-\' (each host on separate line). '
-                  'If no host or host file is specified then, by default, '
-                  'read from stdin.'),
+                  'or from stdin if \'-\' (each host on separate line). '),
             dest='hostfile', required=False)
 
     parser['del-tag'] = parser['invsub'].add_parser(
             'del-tag', parents=[parser['loglevel'], parser['beta'],
+                                parser['colored_output'],
                                 parser['common'],
                                 parser['inventory_common']])
     parser['del-tag'].add_argument(
@@ -375,20 +384,13 @@ def get_parsers():
     parser['del-tag'].add_argument(
             '-f', '--file',
             help=('Read additional hosts to delete tags for from specified '
-                  'file or from stdin if \'-\' (each host on separate line). '
-                  'If no host or host file is specified then, by default, '
-                  'read from stdin. If no tags/tagfile nor hosts/hostfile'
-                  ' are specified then tags are read from stdin and are'
-                  ' deleted from all hosts.'),
+                  'file or from stdin if \'-\' (each host on separate '
+                  'line). '),
             dest='hostfile', required=False)
     parser['del-tag'].add_argument(
             '-T', '--tag-file',
             help=('Read additional tags from specified file '
-                  'or from stdin if \'-\' (each tag on separate line). '
-                  'If no tag or tag file is specified then, by default, '
-                  'read from stdin. If no tags/tagfile nor'
-                  ' hosts/hostfile are specified then tags are read from'
-                  ' stdin and are added to all hosts.'),
+                  'or from stdin if \'-\' (each tag on separate line). '),
             dest='tagfile', required=False)
     parser['del-tag'].add_argument(
             '-t', '--taglist',
@@ -398,6 +400,7 @@ def get_parsers():
 
     parser['list'] = parser['invsub'].add_parser(
             'list', parents=[parser['loglevel'], parser['beta'],
+                             parser['colored_output'],
                              parser['common'],
                              parser['inventory_common']])
     parser['list'].add_argument(
@@ -430,7 +433,7 @@ def get_parsers():
 
     # Shell
     parser['shell'] = parser['sub'].add_parser(
-            'shell', parents=[parser['loglevel']])
+            'shell', parents=[parser['loglevel'], parser['colored_output']])
     parser['shell'].add_argument(
             '-s', '--shell',
             help=('Select shell to use, defaults to current shell. Used shell'
@@ -468,6 +471,44 @@ def get_parsers():
             'pattern', nargs='?', help='Glob pattern.')
     parser['info'].set_defaults(func=cdist.info.Info.commandline)
 
+    # Scan = config + further
+    parser['scan'] = parser['sub'].add_parser(
+            'scan', parents=[parser['loglevel'],
+                             parser['beta'],
+                             parser['colored_output'],
+                             parser['common'],
+                             parser['config_main']])
+
+    parser['scan'].add_argument(
+        '-m', '--mode', help='Which modes should run',
+        action='append', default=[],
+        choices=['scan', 'trigger', 'config'])
+    parser['scan'].add_argument(
+        '--list',
+        action='store_true',
+        help='List the known hosts and exit')
+    parser['scan'].add_argument(
+        '--config',
+        action='store_true',
+        help='Try to configure detected hosts')
+    parser['scan'].add_argument(
+        '-I', '--interface',
+        action='append',  default=[], required=True,
+        help='On which interfaces to scan/trigger')
+    parser['scan'].add_argument(
+        '--name-mapper',
+        action='store',  default=None,
+        help='Map addresses to names, required for config mode')
+    parser['scan'].add_argument(
+        '-d', '--config-delay',
+        action='store',  default=3600, type=int,
+        help='How long (seconds) to wait before reconfiguring after last try')
+    parser['scan'].add_argument(
+        '-t', '--trigger-delay',
+        action='store',  default=5, type=int,
+        help='How long (seconds) to wait between ICMPv6 echo requests')
+    parser['scan'].set_defaults(func=cdist.scan.commandline.commandline)
+
     for p in parser:
         parser[p].epilog = EPILOG
 
@@ -478,7 +519,12 @@ def handle_loglevel(args):
     if hasattr(args, 'quiet') and args.quiet:
         args.verbose = _verbosity_level_off
 
-    logging.root.setLevel(_verbosity_level[args.verbose])
+    logging.getLogger().setLevel(_verbosity_level[args.verbose])
+
+
+def handle_log_colors(args):
+    if cdist.configuration.ColoredOutputOption.translate(args.colored_output):
+        cdist.log.CdistFormatter.USE_COLORS = True
 
 
 def parse_and_configure(argv, singleton=True):
@@ -492,13 +538,14 @@ def parse_and_configure(argv, singleton=True):
         raise cdist.Error(str(e))
     # Loglevels are handled globally in here
     handle_loglevel(args)
+    handle_log_colors(args)
 
     log = logging.getLogger("cdist")
 
-    log.verbose("version %s" % cdist.VERSION)
-    log.trace('command line args: {}'.format(cfg.command_line_args))
-    log.trace('configuration: {}'.format(cfg.get_config()))
-    log.trace('configured args: {}'.format(args))
+    log.verbose("version %s", cdist.VERSION)
+    log.trace('command line args: %s', cfg.command_line_args)
+    log.trace('configuration: %s', cfg.get_config())
+    log.trace('configured args: %s', args)
 
     check_beta(vars(args))
 

cdist/conf/explorer/cpu_cores

@@ -32,6 +32,11 @@ case "$os" in
         sysctl -n hw.ncpuonline
     ;;
 
+    "freebsd"|"netbsd")
+        PATH=$(getconf PATH)
+        sysctl -n hw.ncpu
+    ;;
+
     *)
         if [ -r /proc/cpuinfo ]; then
             cores="$(grep "core id" /proc/cpuinfo | sort | uniq | wc -l)"

cdist/conf/explorer/disks

@@ -30,9 +30,8 @@ case $uname_s in
         sysctl -n hw.disknames | grep -Eo '[lsw]d[0-9]+'
     ;;
     NetBSD)
-        PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
-        sysctl -n hw.disknames \
-        | awk 'BEGIN { RS = " " } /^[lsw]d[0-9]+/'
+        PATH=$(getconf PATH)
+        sysctl -n hw.disknames | awk -v RS=' ' '/^[lsw]d[0-9]+/'
     ;;
     Linux)
         # list of major device numbers toexclude:

cdist/conf/explorer/init

@@ -221,6 +221,7 @@ check_systemstarter() {
 
 check_sysvinit() (
 	init_path=${1:-/sbin/init}
+	test -x "${init_path}" || return 1
 	grep -q 'INIT_VERSION=sysvinit-[0-9.]*' "${init_path}" || return 1
 
 	# It is quite common to use SysVinit to stack other init systemd

cdist/conf/explorer/lsb_codename

@@ -21,6 +21,9 @@
 
 set +e
 case "$("$__explorer/os")" in
+   checkpoint)
+       awk '{printf("%s\n", $(NF-1))}' /etc/cp-release
+   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_CODENAME")

cdist/conf/explorer/lsb_description

@@ -21,6 +21,9 @@
 
 set +e
 case "$("$__explorer/os")" in
+   checkpoint)
+       cat /etc/cp-release
+   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_DESCRIPTION")

cdist/conf/explorer/lsb_id

@@ -21,6 +21,9 @@
 
 set +e
 case "$("$__explorer/os")" in
+   checkpoint)
+       echo "CheckPoint"
+   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_ID")

cdist/conf/explorer/lsb_release

@@ -21,6 +21,9 @@
 
 set +e
 case "$("$__explorer/os")" in
+   checkpoint)
+       sed /etc/cp-release -e 's/.* R\([1-9][0-9]*\)\.[0-9]*$/\1/'
+   ;;
    openwrt)
       # shellcheck disable=SC1091
       (. /etc/openwrt_release && echo "$DISTRIB_RELEASE")

cdist/conf/explorer/memory

@@ -1,8 +1,9 @@
-#!/bin/sh
+#!/bin/sh -e
 #
 # 2014 Daniel Heule  (hda at sfs.biz)
 # 2014 Thomas Oettli (otho at sfs.biz)
 # Copyright 2017, Philippe Gregoire <pg@pgregoire.xyz>
+# 2020 Dennis Camera <dennis.camera at ssrq-sds-fds.ch>
 #
 # This file is part of cdist.
 #
@@ -19,23 +20,73 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
-#
+# Returns the amount of memory physically installed in the system, or if that
+# cannot be determined the amount available to the operating system kernel,
+# in kibibytes (kiB).
 
-# FIXME: other system types (not linux ...)
+str2bytes() {
+	awk -F' ' '
+	$2 ==   "B" || !$2 { print $1 }
+	$2 ==  "kB" { printf "%.f\n", ($1 * 1000) }
+	$2 ==  "MB" { printf "%.f\n", ($1 * 1000 * 1000) }
+	$2 ==  "GB" { printf "%.f\n", ($1 * 1000 * 1000 * 1000) }
+	$2 ==  "TB" { printf "%.f\n", ($1 * 1000 * 1000 * 1000 * 1000) }
+	$2 == "kiB" { printf "%.f\n", ($1 * 1024) }
+	$2 == "MiB" { printf "%.f\n", ($1 * 1024 * 1024) }
+	$2 == "GiB" { printf "%.f\n", ($1 * 1024 * 1024 * 1024) }
+	$2 == "TiB" { printf "%.f\n", ($1 * 1024 * 1024 * 1024 * 1024) }'
+}
 
-os=$("$__explorer/os")
-case "$os" in
-    "macosx")
-        echo "$(sysctl -n hw.memsize)/1024" | bc
-    ;;
+bytes2kib() {
+	awk '$0 > 0 { printf "%.f\n", ($0 / 1024) }'
+}
 
-    "openbsd")
-        echo "$(sysctl -n hw.physmem) / 1048576" | bc
-    ;;
 
-    *)
-    if [ -r /proc/meminfo ]; then
-        grep "MemTotal:" /proc/meminfo | awk '{print $2}'
-    fi
-    ;;
+case $(uname -s)
+in
+	(Darwin)
+		sysctl -n hw.memsize | bytes2kib
+		;;
+	(FreeBSD)
+		sysctl -n hw.realmem | bytes2kib
+		;;
+	(NetBSD|OpenBSD)
+		# NOTE: This reports "usable" memory, not physically installed memory.
+		command -p sysctl -n hw.physmem | bytes2kib
+		;;
+	(SunOS)
+		# Make sure that awk from xpg4 is used for the scripts to work
+		export PATH="/usr/xpg4/bin:${PATH}"
+		prtconf \
+		| awk -F ': ' '
+		  $1 == "Memory size" { sub(/Megabytes/, "MiB", $2); print $2 }
+		  /^$/ { exit }' \
+		| str2bytes \
+		| bytes2kib
+		;;
+	(Linux)
+		if test -d /sys/devices/system/memory
+		then
+			# Use memory blocks if the architecture (e.g. x86, PPC64, s390)
+			# supports them (they denote physical memory)
+			num_mem_blocks=$(cat /sys/devices/system/memory/memory[0-9]*/state | grep -cxF online)
+			mem_block_size=$(cat /sys/devices/system/memory/block_size_bytes)
+
+			echo $((num_mem_blocks * 0x$mem_block_size)) | bytes2kib && exit
+		fi
+		if test -r /proc/meminfo
+		then
+			# Fall back to meminfo file on other architectures (e.g. ARM, MIPS,
+			# PowerPC)
+			# NOTE: This is "usable" memory, not physically installed memory.
+			awk -F ': +' '$1 == "MemTotal" { sub(/B$/, "iB", $2); print $2 }' /proc/meminfo \
+			| str2bytes \
+			| bytes2kib
+		fi
+		;;
+	(*)
+		printf "Your kernel (%s) is currently not supported by the memory explorer\n" "$(uname -s)" >&2
+		printf "Please contribute an implementation for it if you can.\n" >&2
+		exit 1
+		;;
 esac

cdist/conf/explorer/os

@@ -116,6 +116,13 @@ if [ -f /etc/slackware-version ]; then
    exit 0
 fi
 
+# Appliances
+
+if grep -q '^Check Point Gaia' /etc/cp-release 2>/dev/null; then
+    echo checkpoint
+    exit 0
+fi
+
 uname_s="$(uname -s)"
 
 # Assume there is no tr on the client -> do lower case ourselves
@@ -143,6 +150,13 @@ case "$uname_s" in
 esac
 
 if [ -f /etc/os-release ]; then
+   # after sles15, suse don't provide an /etc/SuSE-release anymore, but there is almost no difference between sles and opensuse leap, so call it suse
+   # shellcheck disable=SC1091
+   if (. /etc/os-release && echo "${ID_LIKE}" | grep -q '\(^\|\ \)suse\($\|\ \)')
+   then
+      echo suse
+      exit 0
+   fi
    # already lowercase, according to:
    # https://www.freedesktop.org/software/systemd/man/os-release.html
    awk -F= '/^ID=/ { if ($2 ~ /^'"'"'(.*)'"'"'$/ || $2 ~ /^"(.*)"$/) { print substr($2, 2, length($2) - 2) } else { print $2 } }' /etc/os-release

cdist/conf/explorer/os_release

@@ -34,5 +34,9 @@ elif test -f /var/run/os-release
 then
 	# FreeBSD (created by os-release service)
 	cat /var/run/os-release
+elif test -f /etc/cp-release
+then
+        # Checkpoint firewall or management (actually linux based)
+        cat /etc/cp-release
 fi
 

cdist/conf/explorer/os_version

@@ -1,6 +1,7 @@
-#!/bin/sh
+#!/bin/sh -e
 #
 # 2010-2011 Nico Schottelius (nico-cdist at schottelius.org)
+# 2020-2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -17,12 +18,22 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
-#
 # All os variables are lower case
 #
-#
 
-case "$("$__explorer/os")" in
+rc_getvar() {
+   awk -F= -v varname="$2" '
+      function unquote(s) {
+         if (s ~ /^".*"$/ || s ~ /^'\''.*'\''$/)
+            return substr(s, 2, length(s) - 2)
+         else
+            return s
+      }
+      $1 == varname { print unquote(substr($0, index($0, "=") + 1)) }' "$1"
+}
+
+case $("${__explorer:?}/os")
+in
    amazon)
       cat /etc/system-release
    ;;
@@ -30,11 +41,58 @@ case "$("$__explorer/os")" in
       # empty, but well...
       cat /etc/arch-release
    ;;
+   checkpoint)
+       awk '{version=$NF; printf("%s\n", substr(version, 2))}' /etc/cp-release
+    ;;
    debian)
-      cat /etc/debian_version
+      debian_version=$(cat /etc/debian_version)
+      case $debian_version
+      in
+          testing/unstable)
+              # previous to Debian 4.0 testing/unstable was used
+              # cf. https://metadata.ftp-master.debian.org/changelogs/main/b/base-files/base-files_11_changelog
+              echo 3.99
+              ;;
+          */sid)
+              # sid versions don't have a number, so we decode by codename:
+              case $(expr "$debian_version" : '\([a-z]\{1,\}\)/')
+              in
+                  trixie) echo 12.99 ;;
+                  bookworm) echo 11.99 ;;
+                  bullseye) echo 10.99 ;;
+                  buster) echo 9.99 ;;
+                  stretch) echo 8.99 ;;
+                  jessie) echo 7.99 ;;
+                  wheezy) echo 6.99 ;;
+                  squeeze) echo 5.99 ;;
+                  lenny) echo 4.99 ;;
+                  *) echo 99.99 ;;
+              esac
+              ;;
+          *)
+              echo "$debian_version"
+              ;;
+      esac
    ;;
    devuan)
-      cat /etc/devuan_version
+      devuan_version=$(cat /etc/devuan_version)
+      case ${devuan_version}
+      in
+         (*/ceres)
+            # ceres versions don't have a number, so we decode by codename:
+            case ${devuan_version}
+            in
+               (daedalus/ceres) echo 4.99 ;;
+               (chimaera/ceres) echo 3.99 ;;
+               (beowulf/ceres) echo 2.99 ;;
+               (ascii/ceres) echo 1.99 ;;
+               (*) exit 1
+            esac
+            ;;
+         (*)
+            echo "${devuan_version}"
+            ;;
+      esac
    ;;
    fedora)
       cat /etc/fedora-release
@@ -43,7 +101,20 @@ case "$("$__explorer/os")" in
       cat /etc/gentoo-release
    ;;
    macosx)
-      sw_vers -productVersion
+      # NOTE: Legacy versions (< 10.3) do not support options
+      sw_vers | awk -F ':[ \t]+' '$1 == "ProductVersion" { print $2 }'
+   ;;
+   freebsd)
+      # Apparently uname -r is not a reliable way to get the patch level.
+      # See: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=251743
+      if command -v freebsd-version >/dev/null 2>&1
+      then
+         # get userland version
+         freebsd-version -u
+      else
+         # fallback to kernel release for FreeBSD < 10.0
+         uname -r
+      fi
    ;;
    *bsd|solaris)
       uname -r
@@ -68,9 +139,22 @@ case "$("$__explorer/os")" in
       fi
    ;;
    ubuntu)
-      lsb_release -sr
+      if command -v lsb_release >/dev/null 2>&1
+      then
+         lsb_release -sr
+      elif test -r /usr/lib/os-release
+      then
+         # fallback to /usr/lib/os-release if lsb_release is not present (like
+         # on minimized Ubuntu installations)
+         rc_getvar /usr/lib/os-release VERSION_ID
+      elif test -r /etc/lsb-release
+      then
+         # extract DISTRIB_RELEASE= variable from /etc/lsb-release on old
+         # versions without /usr/lib/os-release.
+         rc_getvar /etc/lsb-release DISTRIB_RELEASE
+      fi
    ;;
    alpine)
        cat /etc/alpine-release
    ;;
-esac
+esac

cdist/conf/type/__acl/explorer/getent

@@ -0,0 +1,4 @@
+#!/bin/sh -e
+
+getent passwd | awk -F: '{print "user:"$1}'
+getent group | awk -F: '{print "group:"$1}'

cdist/conf/type/__acl/gencode-remote

@@ -22,8 +22,8 @@ file_is="$( cat "$__object/explorer/file_is" )"
 
 if [ "$file_is" = 'missing' ] \
     && [ -z "$__cdist_dry_run" ] \
-    && \( [ ! -f "$__object/parameter/file" ] \
-        || [ ! -f "$__object/parameter/directory" ] \)
+    && [ ! -f "$__object/parameter/file" ] \
+    && [ ! -f "$__object/parameter/directory" ]
 then
     exit 0
 fi
@@ -47,28 +47,26 @@ then
 elif [ -f "$__object/parameter/entry" ]
 then
     acl_should="$( cat "$__object/parameter/entry" )"
-elif [ -f "$__object/parameter/acl" ]
-then
-    acl_should="$( cat "$__object/parameter/acl" )"
-elif
-    [ -f "$__object/parameter/user" ] \
-        || [ -f "$__object/parameter/group" ] \
-        || [ -f "$__object/parameter/mask" ] \
-        || [ -f "$__object/parameter/other" ]
-then
-    acl_should="$( for param in user group mask other
-    do
-        [ ! -f "$__object/parameter/$param" ] && continue
-
-        echo "$param" | grep -Eq 'mask|other' && sep=:: || sep=:
-
-        echo "$param$sep$( cat "$__object/parameter/$param" )"
-    done )"
 else
     echo 'no parameters set' >&2
     exit 1
 fi
 
+# instead of setfacl's non-helpful message "Option -m: Invalid argument near character X"
+# let's check if target has necessary users and groups, since mistyped or missing
+# users/groups in target is most common reason.
+echo "$acl_should" \
+    | grep -Po '(user|group):[^:]+' \
+    | sort -u \
+    | while read -r l
+    do
+        if ! grep "$l" -Fxq "$__object/explorer/getent"
+        then
+            echo "no $l' in target" | sed "s/:/ '/" >&2
+            exit 1
+        fi
+    done
+
 if [ -f "$__object/parameter/default" ]
 then
     acl_should="$( echo "$acl_should" \

cdist/conf/type/__acl/man.rst

@@ -12,11 +12,14 @@ Fully supported and tested on Linux (ext4 filesystem), partial support for FreeB
 
 See ``setfacl`` and ``acl`` manpages for more details.
 
+One of ``--entry`` or ``--source`` must be used.
 
-REQUIRED MULTIPLE PARAMETERS
+
+OPTIONAL MULTIPLE PARAMETERS
 ----------------------------
 entry
    Set ACL entry following ``getfacl`` output syntax.
+   Must be used if ``--source`` is not used.
 
 
 OPTIONAL PARAMETERS
@@ -25,6 +28,7 @@ source
    Read ACL entries from stdin or file.
    Ordering of entries is not important.
    When reading from file, comments and empty lines are ignored.
+   Must be used if ``--entry`` is not used.
 
 file
    Create/change file with ``__file`` using ``user:group:mode`` pattern.
@@ -48,12 +52,6 @@ remove
    ``mask`` and ``other`` entries can't be removed, but only changed.
 
 
-DEPRECATED PARAMETERS
----------------------
-Parameters ``acl``, ``user``, ``group``, ``mask`` and ``other`` are deprecated and they
-will be removed in future versions. Please use ``entry`` parameter instead.
-
-
 EXAMPLES
 --------
 

cdist/conf/type/__acl/parameter/deprecated/acl

@@ -1 +0,0 @@
-see manual for details

cdist/conf/type/__acl/parameter/deprecated/group

@@ -1 +0,0 @@
-see manual for details

cdist/conf/type/__acl/parameter/deprecated/mask

@@ -1 +0,0 @@
-see manual for details

cdist/conf/type/__acl/parameter/deprecated/other

@@ -1 +0,0 @@
-see manual for details

cdist/conf/type/__acl/parameter/deprecated/user

@@ -1 +0,0 @@
-see manual for details

cdist/conf/type/__acl/parameter/optional

@@ -1,5 +1,3 @@
-mask
-other
 source
 file
 directory

cdist/conf/type/__acl/parameter/optional_multiple

@@ -1,4 +1 @@
 entry
-acl
-user
-group

cdist/conf/type/__apt_backports/man.rst

@@ -0,0 +1,104 @@
+cdist-type__debian_backports(7)
+===============================
+
+NAME
+----
+cdist-type__apt_backports - Install backports
+
+
+DESCRIPTION
+-----------
+This singleton type installs backports for the current OS release.
+It aborts if backports are not supported for the specified OS or
+no version codename could be fetched (like Debian unstable).
+
+The package index will be automatically updated if required.
+
+It supports backports from following OSes:
+
+- Debian
+- Devuan
+- Ubuntu
+
+
+REQUIRED PARAMETERS
+-------------------
+None.
+
+
+OPTIONAL PARAMETERS
+-------------------
+state
+    Represents the state of the backports repository. ``present`` or
+    ``absent``, defaults to ``present``.
+
+    Will be directly passed to :strong:`cdist-type__apt_source`\ (7).
+
+mirror
+    The mirror to fetch the backports from. Will defaults to the generic
+    mirror of the current OS.
+
+    Will be directly passed to :strong:`cdist-type__apt_source`\ (7).
+
+
+BOOLEAN PARAMETERS
+------------------
+None.
+
+
+MESSAGES
+--------
+None.
+
+
+EXAMPLES
+--------
+
+.. code-block:: sh
+
+   # setup the backports
+   __apt_backports
+   __apt_backports --state absent
+   __apt_backports --state present --mirror "http://ftp.de.debian.org/debian/"
+
+   # install a backports package
+   # currently for the buster release backports
+   require="__apt_backports" __package_apt wireguard \
+        --target-release buster-backports
+
+
+ABORTS
+------
+Aborts if the detected os is not Debian.
+
+Aborts if no distribuition codename could be detected. This is common for the
+unstable distribution, but there is no backports repository for it already.
+
+
+CAVEATS
+-------
+For Ubuntu, it setup all componenents for the backports repository: ``main``,
+``restricted``, ``universe`` and ``multiverse``. The user may not want to
+install proprietary packages, which will only be installed if the user
+explicitly uses the backports target-release. The user may change this behavior
+to install backports packages without the need of explicitly select it.
+
+
+SEE ALSO
+--------
+`Official Debian Backports site <https://backports.debian.org/>`_
+
+:strong:`cdist-type__apt_source`\ (7)
+
+
+AUTHORS
+-------
+Matthias Stecher <matthiasstecher at gmx.de>
+
+
+COPYING
+-------
+Copyright \(C) 2020 Matthias Stecher. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__apt_backports/manifest

@@ -0,0 +1,82 @@
+#!/bin/sh -e
+# __apt_backports/manifest
+#
+# 2020 Matthias Stecher (matthiasstecher at gmx.de)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# Enables/disables backports repository. Utilises __apt_source for it.
+#
+
+
+# Get the distribution codename by /etc/os-release.
+#  is already executed in a subshell by string substitution
+#  lsb_release may not be given in all installations
+codename_os_release() {
+    # shellcheck disable=SC1090
+    # shellcheck disable=SC1091
+    . "$__global/explorer/os_release"
+    printf "%s" "$VERSION_CODENAME"
+}
+
+# detect backport distribution
+os="$(cat "$__global/explorer/os")"
+case "$os" in
+    debian)
+        dist="$( codename_os_release )"
+        components="main"
+        mirror="http://deb.debian.org/debian/"
+        ;;
+    devuan)
+        dist="$( codename_os_release )"
+        components="main"
+        mirror="http://deb.devuan.org/merged"
+        ;;
+    ubuntu)
+        dist="$( codename_os_release )"
+        components="main restricted universe multiverse"
+        mirror="http://archive.ubuntu.com/ubuntu"
+        ;;
+
+    *)
+        printf "Backports for %s are not supported!\n" "$os" >&2
+        exit 1
+        ;;
+esac
+
+# error if no codename given (e.g. on Debian unstable)
+if [ -z "$dist" ]; then
+    printf "No backports for unkown version of distribution %s!\n" "$os" >&2
+    exit 1
+fi
+
+
+# parameters
+state="$(cat "$__object/parameter/state")"
+
+# mirror already set for the os, only override user-values
+if [ -f "$__object/parameter/mirror" ]; then
+    mirror="$(cat "$__object/parameter/mirror")"
+fi
+
+
+# install the given backports repository
+__apt_source "${dist}-backports" \
+    --state "$state" \
+    --distribution "${dist}-backports" \
+    --component "$components" \
+    --uri "$mirror"

cdist/conf/type/__apt_backports/parameter/default/state

@@ -0,0 +1 @@
+present

cdist/conf/type/__apt_backports/parameter/optional

@@ -0,0 +1,2 @@
+state
+mirror

cdist/conf/type/__apt_key/explorer/state

@@ -27,18 +27,25 @@ else
    keyid="$__object_id"
 fi
 
+# From apt-key(8):
+#   Use of apt-key is deprecated, except for the use of apt-key del in
+#   maintainer scripts to remove existing keys from the main keyring.
+#   If such usage of apt-key is desired the additional installation of
+#   the GNU Privacy Guard suite (packaged in gnupg) is required.
+if [ -f "${__object}/parameter/use-deprecated-apt-key" ]; then
+   if apt-key export "$keyid" | head -n 1 | grep -Fqe "BEGIN PGP PUBLIC KEY BLOCK"
+      then echo present
+      else echo absent
+   fi
+   exit
+fi
+
 keydir="$(cat "$__object/parameter/keydir")"
 keyfile="$keydir/$__object_id.gpg"
 
-if [ -d "$keydir" ]
+if [ -f "$keyfile" ]
 then
-   if [ -f "$keyfile" ]
-   then echo present
-   else echo absent
-   fi
-else
-   # fallback to deprecated apt-key
-   apt-key export "$keyid" | head -n 1 | grep -Fqe "BEGIN PGP PUBLIC KEY BLOCK" \
-      && echo present \
-      || echo absent
+   echo present
+   exit
 fi
+echo absent

cdist/conf/type/__apt_key/gencode-remote

@@ -25,11 +25,7 @@ else
 fi
 state_should="$(cat "$__object/parameter/state")"
 state_is="$(cat "$__object/explorer/state")"
-
-if [ "$state_should" = "$state_is" ]; then
-   # nothing to do
-   exit 0
-fi
+method="$(cat "$__object/key_method")"
 
 keydir="$(cat "$__object/parameter/keydir")"
 keyfile="$keydir/$__object_id.gpg"
@@ -37,30 +33,18 @@ keyfile="$keydir/$__object_id.gpg"
 case "$state_should" in
    present)
       keyserver="$(cat "$__object/parameter/keyserver")"
-
-      if [ -f "$__object/parameter/uri" ]; then
-         uri="$(cat "$__object/parameter/uri")"
-
-         if [ -d "$keydir" ]; then
-            cat << EOF
-
-curl -s -L \\
-    -o "$keyfile" \\
-    "$uri"
-
-key="\$( cat "$keyfile" )"
-
-if echo "\$key" | grep -Fq 'BEGIN PGP PUBLIC KEY BLOCK'
-then
-    echo "\$key" | gpg --dearmor > "$keyfile"
-fi
-
-EOF
-         else
-            # fallback to deprecated apt-key
-            echo "curl -s -L '$uri' | apt-key add -"
+      # Using __download or __file as key source
+      # Propagate messages if needed
+      if [ "${method}" = "uri" ] || [ "${method}" = "source" ]; then
+         if grep -Eq "^__(file|download)$keyfile" "$__messages_in"; then
+            echo "added '$keyid'" >> "$__messages_out"
          fi
-      elif [ -d "$keydir" ]; then
+         exit 0
+      elif [ "${state_is}" = "present" ]; then
+         exit 0
+      fi
+      # Using key servers to fetch the key
+      if [ ! -f "$__object/parameter/use-deprecated-apt-key" ]; then
          # we need to kill gpg after 30 seconds, because gpg
          # can get stuck if keyserver is not responding.
          # exporting env var and not exit 1,
@@ -100,13 +84,16 @@ EOF
       echo "added '$keyid'" >> "$__messages_out"
    ;;
    absent)
-      if [ -f "$keyfile" ]; then
-         echo "rm '$keyfile'"
-      else
+      # Removal for keys added from a keyserver without this flag
+      # is done in the manifest
+      if [ "$state_is" != "absent" ] && \
+            [ -f "$__object/parameter/use-deprecated-apt-key" ]; then
          # fallback to deprecated apt-key
          echo "apt-key del \"$keyid\""
+         echo "removed '$keyid'" >> "$__messages_out"
+      # Propagate messages if needed
+      elif grep -Eq "^__file$keyfile" "$__messages_in"; then
+         echo "removed '$keyid'" >> "$__messages_out"
       fi
-
-      echo "removed '$keyid'" >> "$__messages_out"
    ;;
 esac

cdist/conf/type/__apt_key/man.rst

@@ -10,6 +10,14 @@ DESCRIPTION
 -----------
 Manages the list of keys used by apt to authenticate packages.
 
+This is done by placing the requested key in a file named
+``$__object_id.gpg`` in the ``keydir`` directory.
+
+This is supported by modern releases of Debian-based distributions.
+
+In order of preference, exactly one of: ``source``, ``uri`` or ``keyid``
+must be specified.
+
 
 REQUIRED PARAMETERS
 -------------------
@@ -18,21 +26,49 @@ None.
 
 OPTIONAL PARAMETERS
 -------------------
+keydir
+   keyring directory, defaults to ``/etc/apt/trusted.pgp.d``, which is
+   enabled system-wide by default.
+
+source
+   path to a file containing the GPG key of the repository.
+   Using this is recommended as it ensures that the manifest/type manintainer
+   has validated the key.
+   If ``-``, the GPG key is read from the type's stdin.
+
 state
    'present' or 'absent'. Defaults to 'present'
 
+uri
+   the URI from which to download the key.
+   It is highly recommended that you only use protocols with TLS like HTTPS.
+   This uses ``__download`` but does not use checksums, if you want to ensure
+   that the key doesn't change, you are better off downloading it and using
+   ``--source``.
+
+
+DEPRECATED OPTIONAL PARAMETERS
+------------------------------
 keyid
-   the id of the key to add. Defaults to __object_id
+   the id of the key to download from the ``keyserver``.
+   This is to be used in absence of ``--source`` and ``--uri`` or together
+   with ``--use-deprecated-apt-key`` for key removal.
+   Defaults to ``$__object_id``.
 
 keyserver
-   the keyserver from which to fetch the key. If omitted the default set
-   in ./parameter/default/keyserver is used.
+   the keyserver from which to fetch the key.
+   Defaults to ``pool.sks-keyservers.net``.
 
-keydir
-   key save location, defaults to ``/etc/apt/trusted.pgp.d``
 
-uri
-   the URI from which to download the key
+DEPRECATED BOOLEAN PARAMETERS
+-----------------------------
+use-deprecated-apt-key
+   ``apt-key(8)`` will last be available in Debian 11 and Ubuntu 22.04.
+   You can use this parameter to force usage of ``apt-key(8)``.
+   Please only use this parameter to *remove* keys from the keyring,
+   in order to prepare for removal of ``apt-key``.
+   Adding keys should be done without this parameter.
+   This parameter will be removed when Debian 11 stops being supported.
 
 
 EXAMPLES
@@ -40,33 +76,39 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Add Ubuntu Archive Automatic Signing Key
-    __apt_key 437D05B5
-    # Same thing
-    __apt_key 437D05B5 --state present
-    # Get rid of it
-    __apt_key 437D05B5 --state absent
+    # add a key that has been verified by a type maintainer
+    __apt_key jitsi_meet_2021 \
+       --source cdist-contrib/type/__jitsi_meet/files/apt_2021.gpg
 
-    # same thing with human readable name and explicit keyid
-    __apt_key UbuntuArchiveKey --keyid 437D05B5
+    # remove an old, deprecated or expired key
+    __apt_key jitsi_meet_2016 --state absent
 
-    # same thing with other keyserver
-    __apt_key UbuntuArchiveKey --keyid 437D05B5 --keyserver keyserver.ubuntu.com
+    # Get rid of a key that might have been added to
+    # /etc/apt/trusted.gpg with apt-key
+    __apt_key 0x40976EAF437D05B5 --use-deprecated-apt-key --state absent
 
-    # download key from the internet
-    __apt_key rabbitmq \
-       --uri http://www.rabbitmq.com/rabbitmq-signing-key-public.asc
+    # add a key that we define in-line
+    __apt_key jitsi_meet_2021 --source '-' <<EOF
+    -----BEGIN PGP PUBLIC KEY BLOCK-----
+    [...]
+    -----END PGP PUBLIC KEY BLOCK-----
+    EOF
+
+    # download or update key from the internet
+    __apt_key rabbitmq_2007 \
+       --uri https://www.rabbitmq.com/rabbitmq-signing-key-public.asc
 
 
 AUTHORS
 -------
 Steven Armstrong <steven-cdist--@--armstrong.cc>
 Ander Punnar <ander-at-kvlt-dot-ee>
+Evilham <contact~~@~~evilham.com>
 
 
 COPYING
 -------
-Copyright \(C) 2011-2019 Steven Armstrong and Ander Punnar. You can
+Copyright \(C) 2011-2021 Steven Armstrong, Ander Punnar and Evilham. You can
 redistribute it and/or modify it under the terms of the GNU General Public
 License as published by the Free Software Foundation, either version 3 of the
 License, or (at your option) any later version.

cdist/conf/type/__apt_key/manifest

@@ -2,7 +2,105 @@
 
 __package gnupg
 
-if [ -f "$__object/parameter/uri" ]
-then __package curl
-else __package dirmngr
+state_should="$(cat "${__object}/parameter/state")"
+
+incompatible_args()
+{
+	cat >> /dev/stderr <<-EOF
+	This type does not support --${1} and --${method} simultaneously.
+	EOF
+	exit 1
+}
+
+if [ -f "${__object}/parameter/source" ]; then
+	method="source"
+	src="$(cat "${__object}/parameter/source")"
+	if [ "${src}" = "-" ]; then
+		src="${__object}/stdin"
+	fi
+fi
+if [ -f "${__object}/parameter/uri" ]; then
+	if [ -n "${method}" ]; then
+		incompatible_args uri
+	fi
+	method="uri"
+	src="$(cat "${__object}/parameter/uri")"
+fi
+if [ -f "${__object}/parameter/keyid" ]; then
+	if [ -n "${method}" ]; then
+		incompatible_args keyid
+	fi
+	method="keyid"
+fi
+# Keep old default
+if [ -z "${method}" ]; then
+	method="keyid"
+fi
+# Save this for later in gencode-remote
+echo "${method}" > "${__object}/key_method"
+
+# Required remotely (most likely already installed)
+__package dirmngr
+# We need this in case a key has to be dearmor'd
+__package gnupg
+export require="__package/gnupg"
+
+if [ -f "${__object}/parameter/use-deprecated-apt-key" ]; then
+	# This is required if apt-key(8) is to be used
+	if [ "${method}" = "source" ] || [ "${method}" = "uri" ]; then
+		incompatible_args use-deprecated-apt-key
+	fi
+else
+	if [ "${state_should}" = "absent" ] && \
+			[ -f "${__object}/parameter/keyid" ]; then
+		cat >> /dev/stderr <<EOF
+You can't reliably remove by keyid without --use-deprecated-apt-key.
+This would very likely do something you do not intend.
+EOF
+		exit 1
+	fi
+fi
+
+keydir="$(cat "${__object}/parameter/keydir")"
+keyfile="${keydir}/${__object_id}.gpg"
+keyfilecdist="${keyfile}.cdist"
+if [ "${state_should}" != "absent" ]; then
+	# Ensure keydir exists
+	__directory "${keydir}" --state exists --mode 0755
+fi
+
+if [ "${state_should}" = "absent" ]; then
+	__file "${keyfile}" --state "absent"
+	__file "${keyfilecdist}" --state "absent"
+elif [ "${method}" = "source" ] || [ "${method}" = "uri" ]; then
+	dearmor="$(cat <<-EOF
+	if [ '${state_should}' = 'present' ]; then
+		# Dearmor if necessary
+		if grep -Fq 'BEGIN PGP PUBLIC KEY BLOCK' '${keyfilecdist}'; then
+			gpg --dearmor < '${keyfilecdist}' > '${keyfile}'
+		else
+			cp '${keyfilecdist}' '${keyfile}'
+		fi
+		# Ensure permissions
+		chown root '${keyfile}'
+		chmod 0444 '${keyfile}'
+	fi
+	EOF
+	)"
+
+	if [ "${method}" = "uri" ]; then
+		__download "${keyfilecdist}" \
+			--url "${src}" \
+			--onchange "${dearmor}"
+		require="__download${keyfilecdist}" \
+			__file "${keyfile}" \
+				--owner root \
+				--mode 0444 \
+				--state pre-exists
+	else
+		__file "${keyfilecdist}" --state "${state_should}" \
+			--mode 0444 \
+			--source "${src}" \
+			--onchange "${dearmor}"
+	fi
 fi

cdist/conf/type/__apt_key/parameter/boolean

@@ -0,0 +1 @@
+use-deprecated-apt-key

cdist/conf/type/__apt_key/parameter/deprecated/use-deprecated-apt-key

@@ -0,0 +1,3 @@
+apt-key(8) will last be available in Debian 11 and Ubuntu 22.04.
+Use this flag *only* to migrate to placing a keyring directly in the
+/etc/apt/trusted.gpg.d/ directory with a descriptive name.

cdist/conf/type/__apt_key/parameter/optional

@@ -1,5 +1,6 @@
-state
+keydir
 keyid
 keyserver
-keydir
+source
+state
 uri

cdist/conf/type/__apt_key_uri/deprecated

@@ -0,0 +1 @@
+Please migrate to using __apt_key key_id --uri URI.

cdist/conf/type/__apt_mark/explorer/state

@@ -24,4 +24,4 @@ else
     name="$__object_id"
 fi
 
-apt-mark showhold | grep -Fq "$name" && echo hold || echo unhold
+apt-mark showhold | grep -q "^${name}$" && echo hold || echo unhold

cdist/conf/type/__apt_norecommends/man.rst

@@ -32,11 +32,12 @@ EXAMPLES
 AUTHORS
 -------
 Steven Armstrong <steven-cdist--@--armstrong.cc>
+Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
 
 
 COPYING
 -------
-Copyright \(C) 2014 Steven Armstrong. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.
+Copyright \(C) 2014 Steven Armstrong, 2020 Dennis Camera.
+You can redistribute it and/or modify it under the terms of the GNU General
+Public License as published by the Free Software Foundation, either version 3 of
+the License, or (at your option) any later version.

cdist/conf/type/__apt_norecommends/manifest

@@ -1,6 +1,7 @@
 #!/bin/sh -e
 #
 # 2014 Steven Armstrong (steven-cdist at armstrong.cc)
+# 2020 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -19,26 +20,28 @@
 #
 
 
-os=$(cat "$__global/explorer/os")
+os=$(cat "${__global:?}/explorer/os")
 
-case "$os" in
-   ubuntu|debian|devuan)
-      # No stinking recommends thank you very much.
-      # If I want something installed I will do so myself.
-      __file /etc/apt/apt.conf.d/99-no-recommends \
-         --owner root --group root --mode 644 \
-         --source - << DONE
-APT::Install-Recommends "0";
-APT::Install-Suggests "0";
-APT::AutoRemove::RecommendsImportant "0";
-APT::AutoRemove::SuggestsImportant "0";
-DONE
-   ;;
-   *)
-      cat >&2 << DONE
+case ${os}
+in
+	(ubuntu|debian|devuan)
+		__file /etc/apt/apt.conf.d/00InstallRecommends --state present \
+			--owner root --group root --mode 0644 --source - <<-'EOF'
+		APT::Install-Recommends "false";
+		APT::Install-Suggests "false";
+		APT::AutoRemove::RecommendsImportant "false";
+		APT::AutoRemove::SuggestsImportant "false";
+		EOF
+
+		# TODO: Remove the following object after some time
+		require=__file/etc/apt/apt.conf.d/00InstallRecommends \
+		__file /etc/apt/apt.conf.d/99-no-recommends --state absent
+		;;
+	(*)
+		cat >&2 <<EOF
 The developer of this type (${__type##*/}) did not think your operating system
 ($os) would have any use for it. If you think otherwise please submit a patch.
-DONE
-      exit 1
-   ;;
+EOF
+		exit 1
+		;;
 esac

cdist/conf/type/__apt_pin/man.rst

@@ -0,0 +1,79 @@
+cdist-type__apt_pin(7)
+======================
+
+NAME
+----
+cdist-type__apt_pin - Manage apt pinning rules
+
+
+DESCRIPTION
+-----------
+Adds/removes/edits rules to pin some packages to a specific distribution. Useful if using multiple debian repositories at the same time. (Useful, if one wants to use a few specific packages from backports or perhaps Debain testing... or even sid.)
+
+
+REQUIRED PARAMETERS
+-------------------
+distribution
+   Specifies what distribution the package should be pinned to. Accepts both codenames (buster/bullseye/sid) and suite names (stable/testing/...).
+
+
+OPTIONAL PARAMETERS
+-------------------
+package
+   Package name, glob or regular expression to match (multiple) packages. If not specified `__object_id` is used.
+
+priority
+   The priority value to assign to matching packages. Deafults to 500. (To match the default target distro's priority)
+
+state
+   Will be passed to underlying `__file` type; see there for valid values and defaults.
+
+
+
+BOOLEAN PARAMETERS
+------------------
+None.
+
+
+EXAMPLES
+--------
+
+.. code-block:: sh
+
+   # Add the bullseye repo to buster, but do not install any packages by default,
+   # only if explicitely asked for (-1 means "never" for apt)
+    __apt_pin bullseye-default \
+       --package "*" \
+       --distribution bullseye \
+       --priority -1
+
+    require="__apt_pin/bullseye-default" __apt_source bullseye \
+       --uri http://deb.debian.org/debian/ \
+       --distribution bullseye \
+       --component main
+
+    __apt_pin foo --package "foo foo-*" --distribution bullseye
+
+    __foo # Assuming, this installs the `foo` package internally
+
+    __package foo-plugin-extras # Assuming we also need some extra stuff
+
+
+SEE ALSO
+--------
+:strong:`apt_preferences`\ (5)
+:strong:`cdist-type__apt_source`\ (7)
+:strong:`cdist-type__apt_backports`\ (7)
+:strong:`cdist-type__file`\ (7)
+
+AUTHORS
+-------
+Daniel Fancsali <fancsali@gmail.com>
+
+
+COPYING
+-------
+Copyright \(C) 2021 Daniel Fancsali. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__apt_pin/manifest

@@ -0,0 +1,68 @@
+#!/bin/sh -e
+#
+# 2021 Daniel Fancsali (fancsali@gmail.com)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+
+
+name="$__object_id"
+
+os=$(cat "$__global/explorer/os")
+state="$(cat "$__object/parameter/state")"
+
+if [ -f "$__object/parameter/package" ]; then
+    package="$(cat "$__object/parameter/package")"
+else
+    package=$name
+fi
+
+distribution="$(cat "$__object/parameter/distribution")"
+priority="$(cat "$__object/parameter/priority")"
+
+
+case "$os" in
+   debian|ubuntu|devuan)
+   ;;
+   *)
+      printf "This type is specific to Debian and it's derivatives" >&2
+      exit 1
+   ;;
+esac
+
+case $distribution in
+    stable|testing|unstable|experimental)
+        pin="release a=$distribution"
+        ;;
+    *)
+        pin="release n=$distribution"
+        ;;
+esac
+
+
+__file "/etc/apt/preferences.d/$name" \
+    --owner root --group root --mode 0644 \
+    --state "$state" \
+    --source - << EOF
+# Created by cdist ${__type##*/}
+# Do not change. Changes will be overwritten.
+#
+
+# $name
+Package: $package
+Pin: $pin
+Pin-Priority: $priority
+EOF

cdist/conf/type/__apt_pin/parameter/default/priority

@@ -0,0 +1 @@
+500

cdist/conf/type/__apt_pin/parameter/default/state

@@ -0,0 +1 @@
+present

cdist/conf/type/__apt_pin/parameter/optional

@@ -0,0 +1,3 @@
+state
+package
+priority

cdist/conf/type/__apt_pin/parameter/required

@@ -0,0 +1 @@
+distribution

cdist/conf/type/__apt_ppa/files/remove-apt-repository

@@ -1,55 +0,0 @@
-#!/usr/bin/env python
-#
-# Remove the given apt repository.
-#
-# Exit with:
-#   0: if it worked
-#   1: if not
-#   2: on other error
-
-import os
-import sys
-from aptsources import distro, sourceslist
-from softwareproperties import ppa
-from softwareproperties.SoftwareProperties import SoftwareProperties
-
-
-def remove_if_empty(file_name):
-    with open(file_name, 'r') as f:
-        if f.read().strip():
-            return
-        os.unlink(file_name)
-
-def remove_repository(repository):
-    #print 'repository:', repository
-    codename = distro.get_distro().codename
-    #print 'codename:', codename
-    (line, file) = ppa.expand_ppa_line(repository.strip(), codename)
-    #print 'line:', line
-    #print 'file:', file
-    deb_source_entry = sourceslist.SourceEntry(line, file)
-    src_source_entry = sourceslist.SourceEntry('deb-src{}'.format(line[3:]), file)
-
-    try:
-        sp = SoftwareProperties()
-        sp.remove_source(deb_source_entry)
-        try:
-            # If there's a deb-src entry, remove that too
-            sp.remove_source(src_source_entry)
-        except:
-            pass
-        remove_if_empty(file)
-        return True
-    except ValueError:
-        print >> sys.stderr, "Error: '%s' doesn't exists in a sourcelist file" % line
-        return False
-
-if __name__ == '__main__':
-    if (len(sys.argv) != 2):
-        print >> sys.stderr, 'Error: need a repository as argument'
-        sys.exit(2)
-    repository = sys.argv[1]
-    if remove_repository(repository):
-        sys.exit(0)
-    else:
-        sys.exit(1)

cdist/conf/type/__apt_ppa/gencode-remote

@@ -29,9 +29,9 @@ fi
 
 case "$state_should" in
    present)
-      echo "add-apt-repository '$name'"
+      echo "add-apt-repository -y '$name'"
    ;;
    absent)
-      echo "remove-apt-repository '$name'"
+      echo "add-apt-repository -r -y '$name'"
    ;;
 esac

cdist/conf/type/__apt_ppa/manifest

@@ -20,9 +20,4 @@
 
 __package software-properties-common
 
-require="__package/software-properties-common" \
-   __file /usr/local/bin/remove-apt-repository \
-   --source "$__type/files/remove-apt-repository" \
-   --mode 0755
-
 require="$__object_name" __apt_update_index

cdist/conf/type/__apt_source/files/source.list.template

@@ -2,13 +2,14 @@
 set -u
 
 entry="$uri $distribution $component"
+
 cat << DONE
 # Created by cdist ${__type##*/}
 # Do not change. Changes will be overwritten.
 #
 
 # $name
-deb ${forcedarch} $entry
+deb ${options} $entry
 DONE
 if [ -f "$__object/parameter/include-src" ]; then
    echo "deb-src $entry"

cdist/conf/type/__apt_source/gencode-remote

@@ -22,7 +22,21 @@
 name="$__object_id"
 destination="/etc/apt/sources.list.d/${name}.list"
 
+# There are special arguments to apt(8) to prevent aborts if apt woudn't been
+# updated after the 19th April 2021 till the bullseye release. The additional
+# arguments acknoledge the happend suite change (the apt(8) update does the
+# same by itself).
+#
+# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
+# allows backward compatablility to pre-buster Debian versions.
+#
+# See more: ticket #861
+# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
+apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
+
+# run 'apt-get update' only if something changed with our sources.list file
+#   it will be run a second time on error as a redundancy messure to success
 if grep -q "^__file${destination}" "$__messages_in"; then
-   printf 'apt-get update || apt-get update\n'
+   printf 'apt-get %s update || apt-get %s update\n' "$apt_opts" "$apt_opts"
 fi
 

cdist/conf/type/__apt_source/man.rst

@@ -23,6 +23,9 @@ OPTIONAL PARAMETERS
 arch
    set this if you need to force and specific arch (ubuntu specific)
 
+signed-by
+   provide a GPG key fingerprint or keyring path for signature checks
+
 state
    'present' or 'absent', defaults to 'present'
 
@@ -56,6 +59,11 @@ EXAMPLES
        --uri http://archive.canonical.com/ \
        --component partner --state present
 
+    __apt_source goaccess \
+       --uri http://deb.goaccess.io/ \
+       --component main \
+       --signed-by C03B48887D5E56B046715D3297BD1A0133449C3D
+
 
 AUTHORS
 -------

cdist/conf/type/__apt_source/manifest

@@ -21,6 +21,7 @@
 name="$__object_id"
 state="$(cat "$__object/parameter/state")"
 uri="$(cat "$__object/parameter/uri")"
+options=""
 
 if [ -f "$__object/parameter/distribution" ]; then
    distribution="$(cat "$__object/parameter/distribution")"
@@ -31,9 +32,15 @@ fi
 component="$(cat "$__object/parameter/component")"
 
 if [ -f "$__object/parameter/arch" ]; then
-   forcedarch="[arch=$(cat "$__object/parameter/arch")]"
-else
-   forcedarch=""
+   options="arch=$(cat "$__object/parameter/arch")"
+fi
+
+if [ -f "$__object/parameter/signed-by" ]; then
+   options="$options signed-by=$(cat "$__object/parameter/signed-by")"
+fi
+
+if [ "$options" ]; then
+    options="[$options]"
 fi
 
 # export variables for use in template
@@ -41,7 +48,7 @@ export name
 export uri
 export distribution
 export component
-export forcedarch
+export options
 
 # generate file from template
 mkdir "$__object/files"

cdist/conf/type/__apt_source/parameter/optional

@@ -1,4 +1,5 @@
 state
 distribution
 component
-arch
+arch
+signed-by

cdist/conf/type/__apt_update_index/gencode-remote

@@ -18,9 +18,23 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
+
+# There are special arguments to apt(8) to prevent aborts if apt woudn't been
+# updated after the 19th April 2021 till the bullseye release. The additional
+# arguments acknoledge the happend suite change (the apt(8) update does the
+# same by itself).
+#
+# Using '-o $config' instead of the --allow-releaseinfo-change-* parameter
+# allows backward compatablility to pre-buster Debian versions.
+#
+# See more: ticket #861
+# https://code.ungleich.ch/ungleich-public/cdist/-/issues/861
+apt_opts="-o Acquire::AllowReleaseInfoChange::Suite=true -o Acquire::AllowReleaseInfoChange::Version=true"
+
 # run 'apt-get update' if anything in /etc/apt is newer then /var/lib/apt/lists
+#   it will be run a second time on error as a redundancy messure to success
 cat << DONE
 if find /etc/apt -mindepth 1 -cnewer /var/lib/apt/lists | grep . > /dev/null; then
-   apt-get update || apt-get update
+   apt-get $apt_opts update || apt-get $apt_opts update
 fi
 DONE

cdist/conf/type/__block/gencode-remote

@@ -46,28 +46,29 @@ fi
 
 remove_block() {
    cat << DONE
-tmpfile=\$(mktemp ${file}.cdist.XXXXXXXXXX)
+tmpfile=\$(mktemp ${quoted_file}.cdist.XXXXXXXXXX)
 # preserve ownership and permissions of existing file
-if [ -f "$file" ]; then
-   cp -p "$file" "\$tmpfile"
+if [ -f $quoted_file ]; then
+   cp -p $quoted_file "\$tmpfile"
 fi
-awk -v prefix=^$(quote "$prefix")\$ -v suffix=^$(quote "$suffix")\$ '
+awk -v prefix=$(quote "$prefix") -v suffix=$(quote "$suffix") '
 {
-   if (match(\$0,prefix)) {
+   if (\$0 == prefix) {
       triggered=1
    }
    if (triggered) {
-      if (match(\$0,suffix)) {
+      if (\$0 == suffix) {
          triggered=0
       }
    } else {
       print
    }
-}' "$file" > "\$tmpfile"
-mv -f "\$tmpfile" "$file"
+}' $quoted_file > "\$tmpfile"
+mv -f "\$tmpfile" $quoted_file
 DONE
 }
 
+quoted_file="$(quote "$file")"
 case "$state_should" in
    present)
       if [ "$state_is" = "changed" ]; then
@@ -77,7 +78,7 @@ case "$state_should" in
          echo add >> "$__messages_out"
       fi
       cat << DONE
-cat >> "$file" << ${__type##*/}_DONE
+cat >> $quoted_file << '${__type##*/}_DONE'
 $(cat "$block")
 ${__type##*/}_DONE
 DONE

cdist/conf/type/__cdist/manifest

@@ -37,6 +37,7 @@ source="$(cat "$__object/parameter/source")"
 # out of it
 home=/home/$username
 
+# shellcheck disable=SC2086
 __user "$username" --home "$home" $shell
 
 require="__user/$username" __directory "$home" \

cdist/conf/type/__clean_path/explorer/list

@@ -18,7 +18,12 @@
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
 
-path="/$__object_id"
+if [ -f "$__object/parameter/path" ]
+then
+    path="$( cat "$__object/parameter/path" )"
+else
+    path="/$__object_id"
+fi
 
 [ ! -d "$path" ] && exit 0
 

cdist/conf/type/__clean_path/gencode-remote

@@ -20,7 +20,12 @@
 
 [ ! -s "$__object/explorer/list" ] && exit 0
 
-path="/$__object_id"
+if [ -f "$__object/parameter/path" ]
+then
+    path="$( cat "$__object/parameter/path" )"
+else
+    path="/$__object_id"
+fi
 
 pattern="$( cat "$__object/parameter/pattern" )"
 

cdist/conf/type/__clean_path/man.rst

@@ -10,7 +10,7 @@ DESCRIPTION
 -----------
 Remove files and directories which match the pattern.
 
-Provided path (as __object_id) must be a directory.
+Provided path must be a directory.
 
 Patterns are passed to ``find``'s ``-regex`` - see ``find(1)`` for more details.
 
@@ -29,6 +29,9 @@ pattern
 
 OPTIONAL PARAMETERS
 -------------------
+path
+   Path which will be cleaned. Defaults to ``$__object_id``.
+
 exclude
    Pattern of files which are excluded from removal.
 
@@ -46,6 +49,11 @@ EXAMPLES
         --exclude '.+\(charset\.conf\|security\.conf\)' \
         --onchange 'service apache2 restart'
 
+    __clean_path apache2-conf-enabled \
+        --path /etc/apache2/conf-enabled \
+        --pattern '.+' \
+        --exclude '.+\(charset\.conf\|security\.conf\)' \
+        --onchange 'service apache2 restart'
 
 AUTHORS
 -------

cdist/conf/type/__clean_path/parameter/optional

@@ -1,2 +1,3 @@
 exclude
 onchange
+path

cdist/conf/type/__cron/man.rst

@@ -21,6 +21,11 @@ command
 
 OPTIONAL PARAMETERS
 -------------------
+**NOTE**: All time-related parameters (``--minute``, ``--hour``, ``--day_of_month``
+``--month`` and ``--day_of_week``) defaults to ``*``, which means to execute it
+**always**. If you set ``--hour 0`` to execute the cronjob only at midnight, it
+will execute **every** minute in the first hour of the morning all days.
+
 state
    Either present or absent. Defaults to present.
 minute

cdist/conf/type/__debconf_set_selections/explorer/state

@@ -0,0 +1,142 @@
+#!/bin/sh -e
+#
+# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+# Determine current debconf selections' state.
+# Prints one of:
+#   present: all selections are already set as they should.
+#   different: one or more of the selections have a different value.
+#   absent: one or more of the selections are not (currently) defined.
+#
+
+test -x /usr/bin/perl || {
+	# cannot find perl (no perl ~ no debconf)
+	echo 'absent'
+	exit 0
+}
+
+linesfile="${__object:?}/parameter/line"
+test -s "${linesfile}" || {
+	if test -s "${__object:?}/parameter/file"
+	then
+		echo absent
+	else
+		echo present
+	fi
+	exit 0
+}
+
+# assert __type_explorer is set (because it is used by the Perl script)
+: "${__type_explorer:?}"
+
+/usr/bin/perl -- - "${linesfile}" <<'EOF'
+use strict;
+use warnings "all";
+
+use Fcntl qw(:DEFAULT :flock);
+
+use Debconf::Db;
+use Debconf::Question;
+
+# Extract @known... arrays from debconf-set-selections
+# These values are required to distinguish flags and values in the given lines.
+# DC: I couldn't think of a more ugly solution to the problem…
+my @knownflags;
+my @knowntypes;
+my $debconf_set_selections = '/usr/bin/debconf-set-selections';
+if (-e $debconf_set_selections) {
+	my $sed_known = 's/^my \(@known\(flags\|types\) = qw([a-z ]*);\).*$/\1/p';
+	eval `sed -n '$sed_known' '$debconf_set_selections'`;
+}
+
+sub mungeline ($) {
+	my $line = shift;
+	chomp $line;
+	$line =~ s/\r$//;
+	return $line;
+}
+
+sub fatal { printf STDERR @_; exit 1; }
+
+my $state = 'present';
+
+sub state {
+	my $new = shift;
+	if ($state eq 'present'
+	    or ($state eq 'different' and $new eq 'absent')) {
+		$state = $new;
+	}
+}
+
+
+# Load Debconf DB but manually lock on the state explorer script,
+# because Debconf aborts immediately if executed concurrently.
+# This is not really an ideal solution because the Debconf DB could be locked by
+# another process (e.g. apt-get), but no way to achieve this could be found.
+# If you know how to, please provide a patch.
+my $lockfile = "%ENV{'__type_explorer'}/state";
+if (open my $lock_fh, '+<', $lockfile) {
+   flock $lock_fh, LOCK_EX or die "Cannot lock $lockfile";
+}
+{
+	Debconf::Db->load(readonly => 'true');
+}
+
+
+while (<>) {
+	# Read and process lines (taken from debconf-set-selections)
+	$_ = mungeline($_);
+	while (/\\$/ && ! eof) {
+		s/\\$//;
+		$_ .= mungeline(<>);
+	}
+	next if /^\s*$/ || /^\s*\#/;
+
+	my ($owner, $label, $type, $content) = /^\s*(\S+)\s+(\S+)\s+(\S+)(?:\s(.*))?/
+		or fatal "invalid line: %s\n", $_;
+	$content = '' unless defined $content;
+
+
+	# Compare is and should state
+	my $q = Debconf::Question->get($label);
+
+	unless (defined $q) {
+		# probably a preseed
+		state 'absent';
+		next;
+	}
+
+	if (grep { $_ eq $q->type } @knownflags) {
+		# This line wants to set a flag, presumably.
+		if ($q->flag($q->type) ne $content) {
+			state 'different';
+		}
+	} else {
+		# Otherwise, it's probably a value…
+		if ($q->value ne $content) {
+			state 'different';
+		}
+
+		unless (grep { $_ eq $owner } (split /, /, $q->owners)) {
+			state 'different';
+		}
+	}
+}
+
+printf "%s\n", $state;
+EOF

cdist/conf/type/__debconf_set_selections/gencode-remote

@@ -1,6 +1,7 @@
 #!/bin/sh -e
 #
 # 2011-2014 Nico Schottelius (nico-cdist at schottelius.org)
+# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
 #
 # This file is part of cdist.
 #
@@ -17,16 +18,37 @@
 # You should have received a copy of the GNU General Public License
 # along with cdist. If not, see <http://www.gnu.org/licenses/>.
 #
-#
-# Setup selections
-#
 
-filename="$(cat "$__object/parameter/file")"
-
-if [ "$filename" = "-" ]; then
-    filename="$__object/stdin"
+if test -f "${__object:?}/parameter/line"
+then
+	filename="${__object:?}/parameter/line"
+elif test -s "${__object:?}/parameter/file"
+then
+	filename=$(cat "${__object:?}/parameter/file")
+	if test "${filename}" = '-'
+	then
+		filename="${__object:?}/stdin"
+	fi
+else
+	printf 'Neither --line nor --file set.\n' >&2
+	exit 1
 fi
 
-echo "debconf-set-selections << __file-eof"
-cat "$filename"
-echo "__file-eof"
+# setting no lines makes no sense
+test -s "${filename}" || exit 0
+
+state_is=$(cat "${__object:?}/explorer/state")
+
+if test "${state_is}" != 'present'
+then
+	cat <<-CODE
+	debconf-set-selections <<'EOF'
+	$(cat "${filename}")
+	EOF
+	CODE
+
+	awk '
+		{
+			printf "set %s %s %s %s\n", $1, $2, $3, $4
+		}' "${filename}" >>"${__messages_out:?}"
+fi

cdist/conf/type/__debconf_set_selections/man.rst

@@ -8,15 +8,33 @@ cdist-type__debconf_set_selections - Setup debconf selections
 
 DESCRIPTION
 -----------
-On Debian and alike systems debconf-set-selections(1) can be used
+On Debian and alike systems :strong:`debconf-set-selections`\ (1) can be used
 to setup configuration parameters.
 
 
 REQUIRED PARAMETERS
 -------------------
+cf. ``--line``.
+
+
+OPTIONAL PARAMETERS
+-------------------
 file
-   Use the given filename as input for debconf-set-selections(1)
-   If filename is "-", read from stdin.
+   Use the given filename as input for :strong:`debconf-set-selections`\ (1)
+   If filename is ``-``, read from stdin.
+
+   **This parameter is deprecated, because it doesn't work with state detection.**
+line
+   A line in :strong:`debconf-set-selections`\ (1) compatible format.
+   This parameter can be used multiple times to set multiple options.
+
+   (This parameter is actually required, but marked optional because the
+   deprecated ``--file`` is still accepted.)
+
+
+BOOLEAN PARAMETERS
+------------------
+None.
 
 
 EXAMPLES
@@ -24,30 +42,29 @@ EXAMPLES
 
 .. code-block:: sh
 
-    # Setup configuration for nslcd
-    __debconf_set_selections nslcd --file /path/to/file
+    # Setup gitolite's gituser
+    __debconf_set_selections nslcd --line 'gitolite gitolite/gituser string git'
 
-    # Setup configuration for nslcd from another type
-    __debconf_set_selections nslcd --file "$__type/files/preseed/nslcd"
-
-    __debconf_set_selections nslcd --file - << eof
-    gitolite gitolite/gituser string git
-    eof
+    # Setup configuration for nslcd from a file.
+    # NB: Multiple lines can be passed to --line, although this can be considered a hack.
+    __debconf_set_selections nslcd --line "$(cat "${__files:?}/preseed/nslcd.debconf")"
 
 
 SEE ALSO
 --------
-:strong:`debconf-set-selections`\ (1), :strong:`cdist-type__update_alternatives`\ (7)
+- :strong:`cdist-type__update_alternatives`\ (7)
+- :strong:`debconf-set-selections`\ (1)
 
 
 AUTHORS
 -------
-Nico Schottelius <nico-cdist--@--schottelius.org>
+| Nico Schottelius <nico-cdist--@--schottelius.org>
+| Dennis Camera <dennis.camera--@--ssrq-sds-fds.ch>
 
 
 COPYING
 -------
-Copyright \(C) 2011-2014 Nico Schottelius. You can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.
+Copyright \(C) 2011-2014 Nico Schottelius, 2021 Dennis Camera.
+You can redistribute it and/or modify it under the terms of the GNU General
+Public License as published by the Free Software Foundation, either version 3 of
+the License, or (at your option) any later version.

cdist/conf/type/__debconf_set_selections/manifest

@@ -0,0 +1,21 @@
+#!/bin/sh -e
+#
+# 2021 Dennis Camera (dennis.camera at ssrq-sds-fds.ch)
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+
+__package_apt debconf

cdist/conf/type/__debconf_set_selections/parameter/deprecated/file

@@ -0,0 +1 @@
+'file' has been deprecated in favour of 'line' in order to provide idempotency.

cdist/conf/type/__debconf_set_selections/parameter/optional_multiple

@@ -0,0 +1 @@
+line

cdist/conf/type/__directory/explorer/stat

@@ -30,10 +30,10 @@ fallback() {
    gid=$(echo "$ls_line" | awk '{ print $4 }')
 
    owner=$(awk -F: -v uid="$uid" '$3 == uid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/passwd)
-   group=$(awk -F: -v uid="$uid" '$3 == uid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/group)
+   group=$(awk -F: -v gid="$gid" '$3 == gid { print $1; f=1 } END { if (!f) print "UNKNOWN" }' /etc/group)
 
    mode_text=$(echo "$ls_line" | awk '{ print $1 }')
-   mode=$(echo "$mode_text" | awk '{ k=0; for (i=0; i<=8; i++) k += ((substr($1, i+2, 1) ~ /[rwx]/) * 2^(8-i)); printf("%0o", k) }')
+   mode=$(echo "$mode_text" | awk '{for(i=8;i>=0;--i){c=substr($1,10-i,1);k+=((c~/[rwxst]/)*2^i);if(!(i%3))k+=(tolower(c)~/[lst]/)*2^(9+i/3)}printf("%04o",k)}')
 
    printf 'type: %s\nowner: %d %s\ngroup: %d %s\nmode: %s %s\n' \
       "$("$__type_explorer/type")" \
@@ -45,56 +45,27 @@ fallback() {
 # nothing to work with, nothing we could do
 [ -e "$destination" ] || exit 0
 
-if ! command -v stat >/dev/null
-then
+command -v stat >/dev/null 2>&1 || {
    fallback
    exit
-fi
+}
 
-case $("$__explorer/os") in
-   "freebsd"|"netbsd"|"openbsd"|"macosx")
-      stat -f "type: %HT
+case $("$__explorer/os")
+in
+   freebsd|netbsd|openbsd|macosx)
+      stat -f 'type: %HT
 owner: %Du %Su
 group: %Dg %Sg
-mode: %Lp %Sp
-" "$destination" | awk '/^type/ { print tolower($0); next } { print }'
+mode: %Mp%03Lp %Sp
+' "$destination" | awk '/^type/ { print tolower($0); next } { print }'
       ;;
-    solaris)
-        ls1="$( ls -ld "$destination" )"
-        ls2="$( ls -ldn "$destination" )"
-
-        if [ -f "$__object/parameter/mode" ]
-        then mode_should="$( cat "$__object/parameter/mode" )"
-        fi
-
-        # yes, it is ugly hack, but if you know better way...
-        if [ -z "$( find "$destination" -perm "$mode_should" )" ]
-        then octets=888
-        else octets="$( echo "$mode_should" | sed 's/^0//' )"
-        fi
-
-        case "$( echo "$ls1" | cut -c1-1 )" in
-            -) echo 'type: regular file' ;;
-            d) echo 'type: directory' ;;
-        esac
-
-        echo "owner: $( echo "$ls2" \
-            | awk '{print $3}' ) $( echo "$ls1" \
-                | awk '{print $3}' )"
-
-        echo "group: $( echo "$ls2" \
-            | awk '{print $4}' ) $( echo "$ls1" \
-                | awk '{print $4}' )"
-
-        echo "mode: $octets $( echo "$ls1" | awk '{print $1}' )"
-    ;;
    *)
       # NOTE: Do not use --printf here as it is not supported by BusyBox stat.
       # NOTE: BusyBox's stat might not support the "-c" option, in which case
       #       we fall through to the shell fallback.
-       stat -c "type: %F
+      stat -c 'type: %F
 owner: %u %U
 group: %g %G
-mode: %a %A" "$destination" 2>/dev/null || fallback
-   ;;
+mode: %04a %A' "$destination" 2>/dev/null || fallback
+      ;;
 esac

cdist/conf/type/__directory/gencode-remote

@@ -97,9 +97,11 @@ case "$state_should" in
             value_should="$(cat "$__object/parameter/$attribute")"
             value_is="$(get_current_value "$attribute" "$value_should")"
 
-            # change 0xxx format to xxx format => same as stat returns
+            # format mode in four digits => same as stat returns
             if [ "$attribute" = mode ]; then
-                value_should="$(echo "$value_should" | sed 's/^0\(...\)/\1/')"
+                # Convert to four-digit octal number (printf interprets
+                # strings with leading 0s as octal!)
+                value_should=$(printf '%04o' "0${value_should}")
             fi
 
             if [ "$set_attributes" = 1 ] || [ "$value_should" != "$value_is" ]; then

cdist/conf/type/__dot_file/man.rst

@@ -25,6 +25,9 @@ user
 OPTIONAL PARAMETERS
 -------------------
 
+dirmode
+    forwarded to :strong:`__directory` type as mode
+
 mode
     forwarded to :strong:`__file` type
 
@@ -34,6 +37,12 @@ state
 source
     forwarded to :strong:`__file` type
 
+file
+    forwarded to :strong:`__file` type
+    This can be used if multiple users need to have a dotfile updated,
+    which will result in duplicate object id errors. When using the
+    file parameter the object id can be some unique value.
+
 MESSAGES
 --------
 
@@ -58,6 +67,15 @@ EXAMPLES
     # Install default xmonad config for user 'eve'. Parent directory is created automatically.
     __dot_file .xmonad/xmonad.hs --user eve --state exists --source "$__files/xmonad.hs"
 
+    # install .vimrc for root and some users
+    for user in root userx usery userz; do
+        __dot_file "${user}_dot_vimrc" \
+            --user $user \
+            --file .vimrc \
+            --state exists \
+            --source "$__files/$user/.vimrc"
+    done
+
 SEE ALSO
 --------
 

cdist/conf/type/__dot_file/manifest

@@ -19,13 +19,20 @@ set -eu
 user="$(cat "${__object}/parameter/user")"
 home="$(cat "${__object}/explorer/home")"
 primary_group="$(cat "${__object}/explorer/primary_group")"
+dirmode="$(cat "${__object}/parameter/dirmode")"
+if [ -f "${__object}/parameter/file" ]; then
+    file="$(cat "${__object}/parameter/file")"
+else
+    file="${__object_id}"
+fi
+
 
 # Create parent directory. Type __directory has flag 'parents', but it
 # will leave us with root-owned directory in user home, which is not
 # acceptable. So we create parent directories one-by-one. XXX: maybe
 # it should be fixed in '__directory'?
 set --
-subpath=${__object_id}
+subpath=${file}
 while subpath="$(dirname "${subpath}")" ; do
 	[ "${subpath}" = . ] && break
 	set -- "${subpath}" "$@"
@@ -36,6 +43,7 @@ export CDIST_ORDER_DEPENDENCY
 for dir ; do
 	__directory "${home}/${dir}"   \
 	    --group "${primary_group}" \
+            --mode "${dirmode}" \
 	    --owner "${user}"
 done
 
@@ -62,4 +70,4 @@ if [ "${source}" = "-" ] ; then
 fi
 unset source
 
-__file "${home}/${__object_id}" --owner "$user" --group "$primary_group" "$@"
+__file "${home}/${file}" --owner "$user" --group "$primary_group" "$@"

cdist/conf/type/__dot_file/parameter/default/dirmode

@@ -0,0 +1 @@
+0700

cdist/conf/type/__dot_file/parameter/optional

@@ -1,3 +1,4 @@
 state
 mode
 source
+dirmode

cdist/conf/type/__download/explorer/remote_cmd_get

@@ -0,0 +1,16 @@
+#!/bin/sh -e
+
+if [ -f "$__object/parameter/cmd-get" ]
+then
+    cat "$__object/parameter/cmd-get"
+elif
+    command -v curl > /dev/null
+then
+    echo "curl -sSL -o - '%s'"
+elif
+    command -v fetch > /dev/null
+then
+    echo "fetch -o - '%s'"
+else
+    echo "wget -O - '%s'"
+fi

cdist/conf/type/__download/explorer/remote_cmd_sum

@@ -0,0 +1,82 @@
+#!/bin/sh -e
+
+if [ ! -f "$__object/parameter/sum" ]
+then
+    exit 0
+fi
+
+if [ -f "$__object/parameter/cmd-sum" ]
+then
+    cat "$__object/parameter/cmd-sum"
+    exit 0
+fi
+
+sum_should="$( cat "$__object/parameter/sum" )"
+
+if echo "$sum_should" | grep -Fq ':'
+then
+    sum_hash="$( echo "$sum_should" | cut -d : -f 1 )"
+else
+    if echo "$sum_should" | grep -Eq '^[0-9]+\s[0-9]+$'
+    then
+        sum_hash='cksum'
+    elif
+        echo "$sum_should" | grep -Eiq '^[a-f0-9]{32}$'
+    then
+        sum_hash='md5'
+    elif
+        echo "$sum_should" | grep -Eiq '^[a-f0-9]{40}$'
+    then
+        sum_hash='sha1'
+    elif
+        echo "$sum_should" | grep -Eiq '^[a-f0-9]{64}$'
+    then
+        sum_hash='sha256'
+    else
+        echo 'hash format detection failed' >&2
+        exit 1
+    fi
+fi
+
+os="$( "$__explorer/os" )"
+
+case "$sum_hash" in
+    cksum)
+        echo "cksum %s | awk '{print \$1\" \"\$2}'"
+    ;;
+    md5)
+        case "$os" in
+            freebsd)
+                echo "md5 -q %s"
+            ;;
+            *)
+                echo "md5sum %s | awk '{print \$1}'"
+            ;;
+        esac
+    ;;
+    sha1)
+        case "$os" in
+            freebsd)
+                echo "sha1 -q %s"
+            ;;
+            *)
+                echo "sha1sum %s | awk '{print \$1}'"
+            ;;
+        esac
+    ;;
+    sha256)
+        case "$os" in
+            freebsd)
+                echo "sha256 -q %s"
+            ;;
+            *)
+                echo "sha256sum %s | awk '{print \$1}'"
+            ;;
+        esac
+    ;;
+    *)
+        # we arrive here only if --sum is given with unknown format prefix
+        echo "unknown hash format: $sum_hash" >&2
+        exit 1
+    ;;
+esac

cdist/conf/type/__download/explorer/state

@@ -0,0 +1,45 @@
+#!/bin/sh -e
+
+if [ -f "$__object/parameter/destination" ]
+then
+    dst="$( cat "$__object/parameter/destination" )"
+else
+    dst="/$__object_id"
+fi
+
+if [ ! -f "$dst" ]
+then
+    echo 'absent'
+    exit 0
+fi
+
+if [ ! -f "$__object/parameter/sum" ]
+then
+    echo 'present'
+    exit 0
+fi
+
+sum_should="$( cat "$__object/parameter/sum" )"
+
+if echo "$sum_should" | grep -Fq ':'
+then
+    sum_should="$( echo "$sum_should" | cut -d : -f 2 )"
+fi
+
+sum_cmd="$( "$__type_explorer/remote_cmd_sum" )"
+
+# shellcheck disable=SC2059
+sum_is="$( eval "$( printf "$sum_cmd" "'$dst'" )" )"
+
+if [ -z "$sum_is" ]
+then
+    echo 'existing destination checksum failed' >&2
+    exit 1
+fi
+
+if [ "$sum_is" = "$sum_should" ]
+then
+    echo 'present'
+else
+    echo 'mismatch'
+fi

cdist/conf/type/__download/gencode-local

@@ -0,0 +1,155 @@
+#!/bin/sh -e
+
+download="$( cat "$__object/parameter/download" )"
+
+state_is="$( cat "$__object/explorer/state" )"
+
+if [ "$download" != 'local' ] || [ "$state_is" = 'present' ]
+then
+    exit 0
+fi
+
+url="$( cat "$__object/parameter/url" )"
+
+if [ -f "$__object/parameter/destination" ]
+then
+    dst="$( cat "$__object/parameter/destination" )"
+else
+    dst="/$__object_id"
+fi
+
+if [ -f "$__object/parameter/cmd-get" ]
+then
+    cmd="$( cat "$__object/parameter/cmd-get" )"
+
+elif command -v curl > /dev/null
+then
+    cmd="curl -sSL -o - '%s'"
+
+elif command -v fetch > /dev/null
+then
+    cmd="fetch -o - '%s'"
+
+elif command -v wget > /dev/null
+then
+    cmd="wget -O - '%s'"
+
+else
+    echo 'local download failed, no usable utility' >&2
+    exit 1
+fi
+
+echo "download_tmp=\"\$( mktemp )\""
+
+# shellcheck disable=SC2059
+printf "$cmd > \"\$download_tmp\"\n" "$url"
+
+if [ -f "$__object/parameter/sum" ]
+then
+    sum_should="$( cat "$__object/parameter/sum" )"
+
+    if [ -f "$__object/parameter/cmd-sum" ]
+    then
+        local_cmd_sum="$( cat "$__object/parameter/cmd-sum" )"
+    else
+        if echo "$sum_should" | grep -Fq ':'
+        then
+            sum_hash="$( echo "$sum_should" | cut -d : -f 1 )"
+
+            sum_should="$( echo "$sum_should" | cut -d : -f 2 )"
+        else
+            if echo "$sum_should" | grep -Eq '^[0-9]+\s[0-9]+$'
+            then
+                sum_hash='cksum'
+            elif
+                echo "$sum_should" | grep -Eiq '^[a-f0-9]{32}$'
+            then
+                sum_hash='md5'
+            elif
+                echo "$sum_should" | grep -Eiq '^[a-f0-9]{40}$'
+            then
+                sum_hash='sha1'
+            elif
+                echo "$sum_should" | grep -Eiq '^[a-f0-9]{64}$'
+            then
+                sum_hash='sha256'
+            else
+                echo 'hash format detection failed' >&2
+                exit 1
+            fi
+        fi
+
+        case "$sum_hash" in
+            cksum)
+                local_cmd_sum="cksum %s | awk '{print \$1\" \"\$2}'"
+            ;;
+            md5)
+                if command -v md5 > /dev/null
+                then
+                    local_cmd_sum="md5 -q %s"
+                elif
+                    command -v md5sum > /dev/null
+                then
+                    local_cmd_sum="md5sum %s | awk '{print \$1}'"
+                fi
+            ;;
+            sha1)
+                if command -v sha1 > /dev/null
+                then
+                    local_cmd_sum="sha1 -q %s"
+                elif
+                    command -v sha1sum > /dev/null
+                then
+                    local_cmd_sum="sha1sum %s | awk '{print \$1}'"
+                fi
+            ;;
+            sha256)
+                if command -v sha256 > /dev/null
+                then
+                    local_cmd_sum="sha256 -q %s"
+                elif
+                    command -v sha256sum > /dev/null
+                then
+                    local_cmd_sum="sha256sum %s | awk '{print \$1}'"
+                fi
+            ;;
+            *)
+                # we arrive here only if --sum is given with unknown format prefix
+                echo "unknown hash format: $sum_hash" >&2
+                exit 1
+            ;;
+        esac
+
+        if [ -z "$local_cmd_sum" ]
+        then
+            echo 'local checksum verification failed, no usable utility' >&2
+            exit 1
+        fi
+    fi
+
+    # shellcheck disable=SC2059
+    echo "sum_is=\"\$( $( printf "$local_cmd_sum" "\"\$download_tmp\"" ) )\""
+
+    echo "if [ \"\$sum_is\" != '$sum_should' ]; then"
+
+    echo "echo 'local download checksum mismatch' >&2"
+
+    echo "rm -f \"\$download_tmp\""
+
+    echo 'exit 1; fi'
+fi
+
+if echo "$__target_host" | grep -Eq '^[0-9a-fA-F:]+$'
+then
+    target_host="[$__target_host]"
+else
+    target_host="$__target_host"
+fi
+
+# shellcheck disable=SC2016
+printf '%s "$download_tmp" %s:%s\n' \
+    "$__remote_copy" \
+    "$target_host" \
+    "$dst"
+
+echo "rm -f \"\$download_tmp\""

cdist/conf/type/__download/gencode-remote

@@ -0,0 +1,59 @@
+#!/bin/sh -e
+
+download="$( cat "$__object/parameter/download" )"
+
+state_is="$( cat "$__object/explorer/state" )"
+
+if [ "$download" = 'remote' ] && [ "$state_is" != 'present' ]
+then
+    cmd_get="$( cat "$__object/explorer/remote_cmd_get" )"
+
+    url="$( cat "$__object/parameter/url" )"
+
+    if [ -f "$__object/parameter/destination" ]
+    then
+        dst="$( cat "$__object/parameter/destination" )"
+    else
+        dst="/$__object_id"
+    fi
+
+    echo "download_tmp=\"\$( mktemp )\""
+
+    # shellcheck disable=SC2059
+    printf "$cmd_get > \"\$download_tmp\"\n" "$url"
+
+    if [ -f "$__object/parameter/sum" ]
+    then
+        sum_should="$( cat "$__object/parameter/sum" )"
+
+        if [ -f "$__object/parameter/cmd-sum" ]
+        then
+            remote_cmd_sum="$( cat "$__object/parameter/cmd-sum" )"
+        else
+            remote_cmd_sum="$( cat "$__object/explorer/remote_cmd_sum" )"
+
+            if echo "$sum_should" | grep -Fq ':'
+            then
+                sum_should="$( echo "$sum_should" | cut -d : -f 2 )"
+            fi
+        fi
+
+        # shellcheck disable=SC2059
+        echo "sum_is=\"\$( $( printf "$remote_cmd_sum" "\"\$download_tmp\"" ) )\""
+
+        echo "if [ \"\$sum_is\" != '$sum_should' ]; then"
+
+        echo "echo 'remote download checksum mismatch' >&2"
+
+        echo "rm -f \"\$download_tmp\""
+
+        echo 'exit 1; fi'
+    fi
+
+    echo "mv \"\$download_tmp\" '$dst'"
+fi
+
+if [ -f "$__object/parameter/onchange" ] && [ "$state_is" != "present" ]
+then
+    cat "$__object/parameter/onchange"
+fi

cdist/conf/type/__download/man.rst

@@ -0,0 +1,101 @@
+cdist-type__download(7)
+=======================
+
+NAME
+----
+cdist-type__download - Download a file
+
+
+DESCRIPTION
+-----------
+By default type will try to use ``curl``, ``fetch`` or ``wget``.
+If download happens in target (see ``--download``) then type will
+fallback to (and install) ``wget``.
+
+If download happens in local machine, then environment variables like
+``{http,https,ftp}_proxy`` etc can be used on cdist execution
+(``http_proxy=foo cdist config ...``).
+
+To change downloaded file's owner, group or permissions, use ``require='__download/path/to/file' __file ...``.
+
+
+REQUIRED PARAMETERS
+-------------------
+url
+   File's URL.
+
+
+OPTIONAL PARAMETERS
+-------------------
+destination
+   Downloaded file's destination in target. If unset, ``$__object_id`` is used.
+
+sum
+   Supported formats: ``cksum`` output without file name, MD5, SHA1 and SHA256.
+
+   Type tries to detect hash format with regexes, but prefixes
+   ``cksum:``, ``md5:``, ``sha1:`` and ``sha256:`` are also supported.
+
+   Checksum have two purposes - state check and post-download verification.
+   In state check, if destination checksum mismatches, then content of URL
+   will be downloaded to temporary file. If downloaded temporary file's
+   checksum matches, then it will be moved to destination (overwritten).
+
+   For local downloads it is expected that usable utilities for checksum
+   calculation exist in the system.
+
+download
+   If ``local`` (default), then file is downloaded to local storage and copied
+   to target host. If ``remote``, then download happens in target.
+
+   For local downloads it is expected that usable utilities for downloading
+   exist in the system. Type will try to use ``curl``, ``fetch`` or ``wget``.
+
+cmd-get
+   Command used for downloading.
+   Command must output to ``stdout``.
+   Parameter will be used for ``printf`` and must include only one
+   format specification ``%s`` which will become URL.
+   For example: ``wget -O - '%s'``.
+
+cmd-sum
+   Command used for checksum calculation.
+   Command output and ``--sum`` parameter must match.
+   Parameter will be used for ``printf`` and must include only one
+   format specification ``%s`` which will become destination.
+   For example: ``md5sum '%s' | awk '{print $1}'``.
+
+onchange
+   Execute this command after download.
+
+
+EXAMPLES
+--------
+
+.. code-block:: sh
+
+    __directory /opt/cpma
+
+    require='__directory/opt/cpma' \
+        __download /opt/cpma/cnq3.zip \
+            --url https://cdn.playmorepromode.com/files/cnq3/cnq3-1.51.zip \
+            --sum 46da3021ca9eace277115ec9106c5b46
+
+    require='__download/opt/cpma/cnq3.zip' \
+        __unpack /opt/cpma/cnq3.zip \
+            --backup-destination \
+            --preserve-archive \
+            --destination /opt/cpma/server
+
+
+AUTHORS
+-------
+Ander Punnar <ander-at-kvlt-dot-ee>
+
+
+COPYING
+-------
+Copyright \(C) 2021 Ander Punnar. You can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.

cdist/conf/type/__download/manifest

@@ -0,0 +1,6 @@
+#!/bin/sh -e
+
+if grep -Eq '^wget' "$__object/explorer/remote_cmd_get"
+then
+    __package wget
+fi

cdist/conf/type/__download/parameter/default/download

@@ -0,0 +1 @@
+local

cdist/conf/type/__download/parameter/optional

@@ -0,0 +1,6 @@
+cmd-get
+cmd-sum
+destination
+download
+onchange
+sum

cdist/conf/type/__download/parameter/required

@@ -0,0 +1 @@
+url

cdist/conf/type/__dpkg_architecture/explorer/architecture

@@ -0,0 +1,26 @@
+#!/bin/sh -e
+# __dpkg_architecture/explorer/architecture
+#
+# 2020 Matthias Stecher <matthiasstecher at gmx.de>
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# Get the main architecture of this machine
+
+
+# print or die in the gencode-remote
+dpkg --print-architecture || true

cdist/conf/type/__dpkg_architecture/explorer/foreign-architectures

@@ -0,0 +1,26 @@
+#!/bin/sh -e
+# __dpkg_architecture/explorer/foreign-architectures
+#
+# 2020 Matthias Stecher <matthiasstecher at gmx.de>
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# Print all additional architectures
+
+
+# print or die in the gencode-remote
+dpkg --print-foreign-architectures || true

cdist/conf/type/__dpkg_architecture/gencode-remote

@@ -0,0 +1,82 @@
+#!/bin/sh -e
+# __dpkg_architecture/gencode-remote
+#
+# 2020 Matthias Stecher <matthiasstecher at gmx.de>
+#
+# This file is part of cdist.
+#
+# cdist is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cdist is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cdist. If not, see <http://www.gnu.org/licenses/>.
+#
+
+
+# Get parameter and explorer
+state_should="$(cat "$__object/parameter/state")"
+arch_wanted="$__object_id"
+main_arch="$(cat "$__object/explorer/architecture")"
+
+# Exit here if dpkg do not work (empty explorer)
+if [ -z "$main_arch" ]; then
+    echo "dpkg is not available or unable to detect a architecture!" >&2
+    exit 1
+fi
+
+
+# Check if requested architecture is the main one
+if [ "$arch_wanted" = "$main_arch" ]; then
+    # higher than present; we can not remove it
+    state_is="present"
+    caution="yes"
+
+# Check if the architecture not already used
+elif grep -qFx "$arch_wanted" "$__object/explorer/foreign-architectures"; then
+    state_is="present"
+
+# arch does not exist
+else
+    state_is="absent"
+fi
+
+
+# Check what to do
+if [ "$state_is" != "$state_should" ]; then
+    case "$state_should" in
+        present)
+            # print add code
+            printf "dpkg --add-architecture '%s'\n" "$arch_wanted"
+            # updating the index to make the new architecture available
+            echo "apt update"
+
+            echo added >> "$__messages_out"
+            ;;
+
+        absent)
+            if [ "$caution" ]; then
+                printf "can not remove the main arch '%s' of the system!\n" "$main_arch" >&2
+                exit 1
+            fi
+
+            # removing all existing packages for the architecture
+            printf "apt purge '.*:%s'\n" "$arch_wanted"
+            # print remove code
+            printf "dpkg --remove-architecture '%s'\n" "$arch_wanted"
+
+            echo removed >> "$__messages_out"
+            ;;
+
+        *)
+            printf "state '%s' is unknown!\n" "$state_should" >&2
+            exit 1
+            ;;
+    esac
+fi